diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-13 15:42:44 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-13 15:42:44 -0700 |
| commit | 3f06962273e73c5f7a651726b191d531cadef788 (patch) | |
| tree | 370219bd166ac6dda105901dd316a54c2f9ac3d0 | |
| parent | 2260840592fbed5be98ca03c97eb8172941f27ac (diff) | |
| parent | 46ce10df799fb0647a9c0e3f793e66463a8d6773 (diff) | |
Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"This contains the following changes for MTD:
MTD core changes:
- New Hyperbus framework
- New _is_locked (concat) implementation
- Various cleanups
NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()
Raw NAND controller drivers changes:
- brcmnand:
- fix BCH ECC layout for large page NAND parts
- fallback to detected ecc-strength, ecc-step-size
- when oops in progress use pio and interrupt polling
- code refactor code to introduce helper functions
- add support for v7.3 controller
- FSMC:
- use nand_op_trace for operation tracing
- GPMI:
- move all driver code into single file
- various cleanups (including dmaengine changes)
- use runtime PM to manage clocks
- implement exec_op
- MTK:
- correct low level time calculation of r/w cycle
- improve data sampling timing for read cycle
- add validity check for CE# pin setting
- fix wrongly assigned OOB buffer pointer issue
- re-license MTK NAND driver as Dual MIT/GPL
- STM32:
- manage the get_irq error case
- increase DMA completion timeouts
Raw NAND chips drivers changes:
- Macronix: add read-retry support
Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings
SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips
SPI-NOR core changes:
- add support for the mt25ql02g and w25q16jv flashes
- print error in case of jedec read id fails
- is25lp256: add post BFPT fix to correct the addr_width
SPI NOR controller drivers changes:
- intel-spi: Add support for Intel Elkhart Lake SPI serial flash
- smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
- cadence-quadspi: add reset control"
* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
mtd: concat: implement _is_locked mtd operation
mtd: concat: refactor concat_lock/concat_unlock
mtd: abi: do not use C++ style comments in uapi header
mtd: afs: remove unneeded NULL check
mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
mtd: hyperbus: Add driver for TI's HyperBus memory controller
mtd: spinand: read returns badly if the last page has bitflips
mtd: spinand: Add initial support for Paragon PN26G0xA
mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
mtd: rawnand: gpmi: remove double assignment to block_size
dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
mtd: rawnand: brcmnand: Add support for v7.3 controller
mtd: rawnand: brcmnand: Refactored code to introduce helper functions
mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
mtd: Add flag to indicate panic_write
mtd: rawnand: Add Macronix NAND read retry support
mtd: onenand: Avoid fall-through warnings
mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
mtd: spinand: Add support for two-byte device IDs
...
49 files changed, 2624 insertions, 2490 deletions
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index 0b7c3738b66c..82156dc8f304 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -28,6 +28,7 @@ Required properties: brcm,brcmnand-v7.0 brcm,brcmnand-v7.1 brcm,brcmnand-v7.2 + brcm,brcmnand-v7.3 brcm,brcmnand - reg : the register start and length for NAND register region. (optional) Flash DMA register range (if present) @@ -101,10 +102,10 @@ Required properties: number (e.g., 0, 1, 2, etc.) - #address-cells : see partition.txt - #size-cells : see partition.txt -- nand-ecc-strength : see nand-controller.yaml -- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml Optional properties: +- nand-ecc-strength : see nand-controller.yaml +- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml - nand-on-flash-bbt : boolean, to enable the on-flash BBT for this chip-select. See nand-controller.yaml - brcm,nand-oob-sector-size : integer, to denote the spare area sector size diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index 4345c3a6f530..945be7d5b236 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -35,6 +35,9 @@ custom properties: (qspi_n_ss_out). - cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low and first bit transfer. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include either "qspi" and/or "qspi-ocp". Example: @@ -50,6 +53,8 @@ Example: cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>; + reset-names = "qspi", "qspi-ocp"; flash0: n25q00@0 { ... diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt new file mode 100644 index 000000000000..ad42f4db32f1 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt @@ -0,0 +1,13 @@ +Bindings for HyperFlash NOR flash chips compliant with Cypress HyperBus +specification and supports Cypress CFI specification 1.5 command set. + +Required properties: +- compatible : "cypress,hyperflash", "cfi-flash" for HyperFlash NOR chips +- reg : Address of flash's memory map + +Example: + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x4000000>; + }; diff --git a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt b/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt deleted file mode 100644 index ddd18c135148..000000000000 --- a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt +++ /dev/null @@ -1,43 +0,0 @@ -* STMicroelectronics Quad Serial Peripheral Interface(QuadSPI) - -Required properties: -- compatible: should be "st,stm32f469-qspi" -- reg: the first contains the register location and length. - the second contains the memory mapping address and length -- reg-names: should contain the reg names "qspi" "qspi_mm" -- interrupts: should contain the interrupt for the device -- clocks: the phandle of the clock needed by the QSPI controller -- A pinctrl must be defined to set pins in mode of operation for QSPI transfer - -Optional properties: -- resets: must contain the phandle to the reset controller. - -A spi flash must be a child of the nor_flash node and could have some -properties. Also see jedec,spi-nor.txt. - -Required properties: -- reg: chip-Select number (QSPI controller may connect 2 nor flashes) -- spi-max-frequency: max frequency of spi bus - -Optional property: -- spi-rx-bus-width: see ../spi/spi-bus.txt for the description - -Example: - -qspi: spi@a0001000 { - compatible = "st,stm32f469-qspi"; - reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; - reg-names = "qspi", "qspi_mm"; - interrupts = <91>; - resets = <&rcc STM32F4_AHB3_RESET(QSPI)>; - clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi0>; - - flash@0 { - reg = <0>; - spi-rx-bus-width = <4>; - spi-max-frequency = <108000000>; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt new file mode 100644 index 000000000000..faa81c2e5da6 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt @@ -0,0 +1,51 @@ +Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs + +Required properties: +- compatible : "ti,am654-hbmc" for AM654 SoC +- reg : Two entries: + First entry pointed to the register space of HBMC controller + Second entry pointing to the memory map region dedicated for + MMIO access to attached flash devices +- ranges : Address translation from offset within CS to allocated MMIO + space in SoC + +Optional properties: +- mux-controls : phandle to the multiplexer that controls selection of + HBMC vs OSPI inside Flash SubSystem (FSS). Default is OSPI, + if property is absent. + See Documentation/devicetree/bindings/mux/reg-mux.txt + for mmio-mux binding details + +Example: + + system-controller@47000000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x47000000 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hbmc_mux: multiplexer { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */ + }; + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x0 0x47034000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + power-domains = <&k3_pds 55>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ + <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */ + mux-controls = <&hbmc_mux 0>; + + /* Slave flash node */ + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 32bb6280c219..211ea3a199bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7435,6 +7435,14 @@ F: include/asm-generic/mshyperv.h F: tools/hv/ F: Documentation/ABI/stable/sysfs-bus-vmbus +HYPERBUS SUPPORT +M: Vignesh Raghavendra <vigneshr@ti.com> +S: Supported +F: drivers/mtd/hyperbus/ +F: include/linux/mtd/hyperbus.h +F: Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt +F: Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt + HYPERVISOR VIRTUAL CONSOLE DRIVER L: linuxppc-dev@lists.ozlabs.org S: Odd Fixes diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 22cc7f68ef6e..20a9cb7cb6d3 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -24,6 +24,7 @@ #include <linux/of_device.h> #include <linux/of_dma.h> #include <linux/list.h> +#include <linux/dma/mxs-dma.h> #include <asm/irq.h> @@ -77,6 +78,7 @@ #define BM_CCW_COMMAND (3 << 0) #define CCW_CHAIN (1 << 2) #define CCW_IRQ (1 << 3) +#define CCW_WAIT4RDY (1 << 5) #define CCW_DEC_SEM (1 << 6) #define CCW_WAIT4END (1 << 7) #define CCW_HALT_ON_TERM (1 << 8) @@ -477,16 +479,16 @@ static void mxs_dma_free_chan_resources(struct dma_chan *chan) * ...... * ->device_prep_slave_sg(0); * ...... - * ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + * ->device_prep_slave_sg(DMA_CTRL_ACK); * ...... * [3] If there are more than two DMA commands in the DMA chain, the code * should be: * ...... * ->device_prep_slave_sg(0); // First * ...... - * ->device_prep_slave_sg(DMA_PREP_INTERRUPT [| DMA_CTRL_ACK]); + * ->device_prep_slave_sg(DMA_CTRL_ACK]); * ...... - * ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK); // Last + * ->device_prep_slave_sg(DMA_CTRL_ACK); // Last * ...... */ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( @@ -500,13 +502,12 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( struct scatterlist *sg; u32 i, j; u32 *pio; - bool append = flags & DMA_PREP_INTERRUPT; - int idx = append ? mxs_chan->desc_count : 0; + int idx = 0; - if (mxs_chan->status == DMA_IN_PROGRESS && !append) - return NULL; + if (mxs_chan->status == DMA_IN_PROGRESS) + idx = mxs_chan->desc_count; - if (sg_len + (append ? idx : 0) > NUM_CCW) { + if (sg_len + idx > NUM_CCW) { dev_err(mxs_dma->dma_device.dev, "maximum number of sg exceeded: %d > %d\n", sg_len, NUM_CCW); @@ -520,7 +521,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( * If the sg is prepared with append flag set, the sg * will be appended to the last prepared sg. */ - if (append) { + if (idx) { BUG_ON(idx < 1); ccw = &mxs_chan->ccw[idx - 1]; ccw->next = mxs_chan->ccw_phys + sizeof(*ccw) * idx; @@ -541,12 +542,14 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits = 0; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - if (flags & DMA_CTRL_ACK) + if (flags & MXS_DMA_CTRL_WAIT4END) ccw->bits |= CCW_WAIT4END; ccw->bits |= CCW_HALT_ON_TERM; ccw->bits |= CCW_TERM_FLUSH; ccw->bits |= BF_CCW(sg_len, PIO_NUM); ccw->bits |= BF_CCW(MXS_DMA_CMD_NO_XFER, COMMAND); + if (flags & MXS_DMA_CTRL_WAIT4RDY) + ccw->bits |= CCW_WAIT4RDY; } else { for_each_sg(sgl, sg, sg_len, i) { if (sg_dma_len(sg) > MAX_XFER_BYTES) { @@ -573,7 +576,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits &= ~CCW_CHAIN; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - if (flags & DMA_CTRL_ACK) + if (flags & MXS_DMA_CTRL_WAIT4END) ccw->bits |= CCW_WAIT4END; } } diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index fb31a7f649a3..80a6e2dcd085 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -274,4 +274,6 @@ source "drivers/mtd/spi-nor/Kconfig" source "drivers/mtd/ubi/Kconfig" +source "drivers/mtd/hyperbus/Kconfig" + endif # MTD diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 806287e80e84..62d649a959e2 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -34,3 +34,4 @@ obj-y += chips/ lpddr/ maps/ devices/ nand/ tests/ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor/ obj-$(CONFIG_MTD_UBI) += ubi/ +obj-$(CONFIG_MTD_HYPERBUS) += hyperbus/ diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index c8fa5906bdf9..f4da7bd552e9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -49,6 +49,16 @@ #define SST49LF008A 0x005a #define AT49BV6416 0x00d6 +/* + * Status Register bit description. Used by flash devices that don't + * support DQ polling (e.g. HyperFlash) + */ +#define CFI_SR_DRB BIT(7) +#define CFI_SR_ESB BIT(5) +#define CFI_SR_PSB BIT(4) +#define CFI_SR_WBASB BIT(3) +#define CFI_SR_SLSB BIT(1) + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -97,6 +107,50 @@ static struct mtd_chip_driver cfi_amdstd_chipdrv = { .module = THIS_MODULE }; +/* + * Use status register to poll for Erase/write completion when DQ is not + * supported. This is indicated by Bit[1:0] of SoftwareFeatures field in + * CFI Primary Vendor-Specific Extended Query table 1.5 + */ +static int cfi_use_status_reg(struct cfi_private *cfi) +{ + struct cfi_pri_amdstd *extp = cfi->cmdset_priv; + u8 poll_mask = CFI_POLL_STATUS_REG | CFI_POLL_DQ; + + return extp->MinorVersion >= '5' && + (extp->SoftwareFeatures & poll_mask) == CFI_POLL_STATUS_REG; +} + +static void cfi_check_err_status(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status; + + if (!cfi_use_status_reg(cfi)) + return; + + cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + status = map_read(map, adr); + + if (map_word_bitsset(map, status, CMD(0x3a))) { + unsigned long chipstatus = MERGESTATUS(status); + + if (chipstatus & CFI_SR_ESB) + pr_err("%s erase operation failed, status %lx\n", + map->name, chipstatus); + if (chipstatus & CFI_SR_PSB) + pr_err("%s program operation failed, status %lx\n", + map->name, chipstatus); + if (chipstatus & CFI_SR_WBASB) + pr_err("%s buffer program command aborted, status %lx\n", + map->name, chipstatus); + if (chipstatus & CFI_SR_SLSB) + pr_err("%s sector write protected, status %lx\n", + map->name, chipstatus); + } +} /* #define DEBUG_CFI_FEATURES */ @@ -742,10 +796,25 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) * correctly and is therefore not done (particularly with interleaved chips * as each chip must be checked independently of the others). */ -static int __xipram chip_ready(struct map_info *map, unsigned long addr) +static int __xipram chip_ready(struct map_info *map, struct flchip *chip, + unsigned long addr) { + struct cfi_private *cfi = map->fldrv_priv; map_word d, t; + if (cfi_use_status_reg(cfi)) { + map_word ready = CMD(CFI_SR_DRB); + /* + * For chips that support status register, check device + * ready bit + */ + cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + d = map_read(map, addr); + + return map_word_andequal(map, d, ready, ready); + } + d = map_read(map, addr); t = map_read(map, addr); @@ -767,10 +836,30 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr) * as each chip must be checked independently of the others). * */ -static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected) +static int __xipram chip_good(struct map_info *map, struct flchip *chip, + unsigned long addr, map_word expected) { + struct cfi_private *cfi = map->fldrv_priv; map_word oldd, curd; + if (cfi_use_status_reg(cfi)) { + map_word ready = CMD(CFI_SR_DRB); + map_word err = CMD(CFI_SR_PSB | CFI_SR_ESB); + /* + * For chips that support status register, check device + * ready bit and Erase/Program status bit to know if + * operation succeeded. + */ + cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + curd = map_read(map, addr); + + if (map_word_andequal(map, curd, ready, ready)) + return !map_word_bitsset(map, curd, err); + + return 0; + } + oldd = map_read(map, addr); curd = map_read(map, addr); @@ -792,7 +881,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr case FL_STATUS: for (;;) { - if (chip_ready(map, adr)) + if (chip_ready(map, chip, adr)) break; if (time_after(jiffies, timeo)) { @@ -830,7 +919,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr chip->state = FL_ERASE_SUSPENDING; chip->erase_suspended = 1; for (;;) { - if (chip_ready(map, adr)) + if (chip_ready(map, chip, adr)) break; if (time_after(jiffies, timeo)) { @@ -1362,7 +1451,7 @@ static int do_otp_lock(struct map_info *map, struct flchip *chip, loff_t adr, /* wait for chip to become ready */ timeo = jiffies + msecs_to_jiffies(2); for (;;) { - if (chip_ready(map, adr)) + if (chip_ready(map, chip, adr)) break; if (time_after(jiffies, timeo)) { @@ -1628,22 +1717,24 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, continue; } - if (time_after(jiffies, timeo) && !chip_ready(map, adr)){ + if (time_after(jiffies, timeo) && + !chip_ready(map, chip, adr)) { xip_enable(map, chip, adr); printk(KERN_WARNING "MTD %s(): software timeout\n", __func__); xip_disable(map, chip, adr); break; } - if (chip_ready(map, adr)) + if (chip_ready(map, chip, adr)) break; /* Latency issues. Drop the lock, wait a while and retry */ UDELAY(map, chip, adr, 1); } /* Did we succeed? */ - if (!chip_good(map, adr, datum)) { + if (!chip_good(map, chip, adr, datum)) { /* reset on all failures. */ + cfi_check_err_status(map, chip, adr); map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ @@ -1881,10 +1972,11 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, * We check "time_after" and "!chip_good" before checking "chip_good" to avoid * the failure due to scheduling. */ - if (time_after(jiffies, timeo) && !chip_good(map, adr, datum)) + if (time_after(jiffies, timeo) && + !chip_good(map, chip, adr, datum)) break; - if (chip_good(map, adr, datum)) { + if (chip_good(map, chip, adr, datum)) { xip_enable(map, chip, adr); goto op_done; } @@ -1901,6 +1993,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, * See e.g. * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf */ + cfi_check_err_status(map, chip, adr); cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, @@ -2018,7 +2111,7 @@ static int cfi_amdstd_panic_wait(struct map_info *map, struct flchip *chip, * If the driver thinks the chip is idle, and no toggle bits * are changing, then the chip is actually idle for sure. */ - if (chip->state == FL_READY && chip_ready(map, adr)) + if (chip->state == FL_READY && chip_ready(map, chip, adr)) return 0; /* @@ -2035,7 +2128,7 @@ static int cfi_amdstd_panic_wait(struct map_info *map, struct flchip *chip, /* wait for the chip to become ready */ for (i = 0; i < jiffies_to_usecs(timeo); i++) { - if (chip_ready(map, adr)) + if (chip_ready(map, chip, adr)) return 0; udelay(1); @@ -2099,14 +2192,15 @@ retry: map_write(map, datum, adr); for (i = 0; i < jiffies_to_usecs(uWriteTimeout); i++) { - if (chip_ready(map, adr)) + if (chip_ready(map, chip, adr)) break; udelay(1); } - if (!chip_good(map, adr, datum)) { + if (!chip_good(map, chip, adr, datum)) { /* reset on all failures. */ + cfi_check_err_status(map, chip, adr); map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ @@ -2300,7 +2394,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) chip->erase_suspended = 0; } - if (chip_good(map, adr, map_word_ff(map))) + if (chip_good(map, chip, adr, map_word_ff(map))) break; if (time_after(jiffies, timeo)) { @@ -2316,6 +2410,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) /* Did we succeed? */ if (ret) { /* reset on all failures. */ + cfi_check_err_status(map, chip, adr); map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ @@ -2396,7 +2491,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, chip->erase_suspended = 0; } - if (chip_good(map, adr, map_word_ff(map))) + if (chip_good(map, chip, adr, map_word_ff(map))) break; if (time_after(jiffies, timeo)) { @@ -2412,6 +2507,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, /* Did we succeed? */ if (ret) { /* reset on all failures. */ + cfi_check_err_status(map, chip, adr); map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ @@ -2533,8 +2629,6 @@ struct ppb_lock { int locked; }; -#define MAX_SECTORS 512 - #define DO_XXLOCK_ONEBLOCK_LOCK ((void *)1) #define DO_XXLOCK_ONEBLOCK_UNLOCK ((void *)2) #define DO_XXLOCK_ONEBLOCK_GETLOCK ((void *)3) @@ -2589,7 +2683,7 @@ static int __maybe_unused do_ppb_xxlock(struct map_info *map, */ timeo = jiffies + msecs_to_jiffies(2000); /* 2s max (un)locking */ for (;;) { - if (chip_ready(map, adr)) + if (chip_ready(map, chip, adr)) break; if (time_after(jiffies, timeo)) { @@ -2633,6 +2727,7 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, int i; int sectors; int ret; + int max_sectors; /* * PPB unlocking always unlocks all sectors of the flash chip. @@ -2640,7 +2735,11 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, * first check the locking status of all sectors and save * it for future use. */ - sect = kcalloc(MAX_SECTORS, sizeof(struct ppb_lock), GFP_KERNEL); + max_sectors = 0; + for (i = 0; i < mtd->numeraseregions; i++) + max_sectors += regions[i].numblocks; + + sect = kcalloc(max_sectors, sizeof(struct ppb_lock), GFP_KERNEL); if (!sect) return -ENOMEM; @@ -2689,9 +2788,9 @@ static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, } sectors++; - if (sectors >= MAX_SECTORS) { + if (sectors >= max_sectors) { printk(KERN_ERR "Only %d sectors for PPB locking supported!\n", - MAX_SECTORS); + max_sectors); kfree(sect); return -EINVAL; } diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig new file mode 100644 index 000000000000..cff6bbd226f5 --- /dev/null +++ b/drivers/mtd/hyperbus/Kconfig @@ -0,0 +1,23 @@ +menuconfig MTD_HYPERBUS + tristate "HyperBus support" + select MTD_CFI + select MTD_MAP_BANK_WIDTH_2 + select MTD_CFI_AMDSTD + select MTD_COMPLEX_MAPPINGS + help + This is the framework for the HyperBus which can be used by + the HyperBus Controller driver to communicate with + HyperFlash. See Cypress HyperBus specification for more + details + +if MTD_HYPERBUS + +config HBMC_AM654 + tristate "HyperBus controller driver for AM65x SoC" + select MULTIPLEXER + select MUX_MMIO + help + This is the driver for HyperBus controller on TI's AM65x and + other SoCs + +endif # MTD_HYPERBUS diff --git a/drivers/mtd/hyperbus/Makefile b/drivers/mtd/hyperbus/Makefile new file mode 100644 index 000000000000..8a936e066f48 --- /dev/null +++ b/drivers/mtd/hyperbus/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_MTD_HYPERBUS) += hyperbus-core.o +obj-$(CONFIG_HBMC_AM654) += hbmc-am654.o diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c new file mode 100644 index 000000000000..08d543b124cd --- /dev/null +++ b/drivers/mtd/hyperbus/hbmc-am654.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +// Author: Vignesh Raghavendra <vigneshr@ti.com> + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mtd/cfi.h> +#include <linux/mtd/hyperbus.h> +#include <linux/mtd/mtd.h> +#include <linux/mux/consumer.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/types.h> + +#define AM654_HBMC_CALIB_COUNT 25 + +struct am654_hbmc_priv { + struct hyperbus_ctlr ctlr; + struct hyperbus_device hbdev; + struct mux_control *mux_ctrl; +}; + +static int am654_hbmc_calibrate(struct hyperbus_device *hbdev) +{ + struct map_info *map = &hbdev->map; + struct cfi_private cfi; + int count = AM654_HBMC_CALIB_COUNT; + int pass_count = 0; + int ret; + + cfi.interleave = 1; + cfi.device_type = CFI_DEVICETYPE_X16; + cfi_send_gen_cmd(0xF0, 0, 0, map, &cfi, cfi.device_type, NULL); + cfi_send_gen_cmd(0x98, 0x55, 0, map, &cfi, cfi.device_type, NULL); + + while (count--) { + ret = cfi_qry_present(map, 0, &cfi); + if (ret) + pass_count++; + else + pass_count = 0; + if (pass_count == 5) + break; + } + + cfi_qry_mode_off(0, map, &cfi); + + return ret; +} + +static const struct hyperbus_ops am654_hbmc_ops = { + .calibrate = am654_hbmc_calibrate, +}; + +static int am654_hbmc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct am654_hbmc_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + if (of_property_read_bool(dev->of_node, "mux-controls")) { + struct mux_control *control = devm_mux_control_get(dev, NULL); + + if (IS_ERR(control)) + return PTR_ERR(control); + + ret = mux_control_select(control, 1); + if (ret) { + dev_err(dev, "Failed to select HBMC mux\n"); + return ret; + } + priv->mux_ctrl = control; + } + + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + goto disable_pm; + } + + priv->ctlr.dev = dev; + priv->ctlr.ops = &am654_hbmc_ops; + priv->hbdev.ctlr = &priv->ctlr; + priv->hbdev.np = of_get_next_child(dev->of_node, NULL); + ret = hyperbus_register_device(&priv->hbdev); + if (ret) { + dev_err(dev, "failed to register controller\n"); + pm_runtime_put_sync(&pdev->dev); + goto disable_pm; + } + + return 0; +disable_pm: + pm_runtime_disable(dev); + if (priv->mux_ctrl) + mux_control_deselect(priv->mux_ctrl); + return ret; +} + +static int am654_hbmc_remove(struct platform_device *pdev) +{ + struct am654_hbmc_priv *priv = platform_get_drvdata(pdev); + int ret; + + ret = hyperbus_unregister_device(&priv->hbdev); + if (priv->mux_ctrl) + mux_control_deselect(priv->mux_ctrl); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return ret; +} + +static const struct of_device_id am654_hbmc_dt_ids[] = { + { + .compatible = "ti,am654-hbmc", + }, + { /* end of table */ } +}; + +MODULE_DEVICE_TABLE(of, am654_hbmc_dt_ids); + +static struct platform_driver am654_hbmc_platform_driver = { + .probe = am654_hbmc_probe, + .remove = am654_hbmc_remove, + .driver = { + .name = "hbmc-am654", + .of_match_table = am654_hbmc_dt_ids, + }, +}; + +module_platform_driver(am654_hbmc_platform_driver); + +MODULE_DESCRIPTION("HBMC driver for AM654 SoC"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:hbmc-am654"); +MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>"); diff --git a/drivers/mtd/hyperbus/hyperbus-core.c b/drivers/mtd/hyperbus/hyperbus-core.c new file mode 100644 index 000000000000..6af9ea34117d --- /dev/null +++ b/drivers/mtd/hyperbus/hyperbus-core.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +// Author: Vignesh Raghavendra <vigneshr@ti.com> + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mtd/hyperbus.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/types.h> + +static struct hyperbus_device *map_to_hbdev(struct map_info *map) +{ + return container_of(map, struct hyperbus_device, map); +} + +static map_word hyperbus_read16(struct map_info *map, unsigned long addr) +{ + struct hyperbus_device *hbdev = map_to_hbdev(map); + struct hyperbus_ctlr *ctlr = hbdev->ctlr; + map_word read_data; + + read_data.x[0] = ctlr->ops->read16(hbdev, addr); + + return read_data; +} + +static void hyperbus_write16(struct map_info *map, map_word d, + unsigned long addr) +{ + struct hyperbus_device *hbdev = map_to_hbdev(map); + struct hyperbus_ctlr *ctlr = hbdev->ctlr; + + ctlr->ops->write16(hbdev, addr, d.x[0]); +} + +static void hyperbus_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) +{ + struct hyperbus_device *hbdev = map_to_hbdev(map); + struct hyperbus_ctlr *ctlr = hbdev->ctlr; + + ctlr->ops->copy_from(hbdev, to, from, len); +} + +static void hyperbus_copy_to(struct map_info *map, unsigned long to, + const void *from, ssize_t len) +{ + struct hyperbus_device *hbdev = map_to_hbdev(map); + struct hyperbus_ctlr *ctlr = hbdev->ctlr; + + ctlr->ops->copy_to(hbdev, to, from, len); +} + +int hyperbus_register_device(struct hyperbus_device *hbdev) +{ + const struct hyperbus_ops *ops; + struct hyperbus_ctlr *ctlr; + struct device_node *np; + struct map_info *map; + struct resource res; + struct device *dev; + int ret; + + if (!hbdev || !hbdev->np || !hbdev->ctlr || !hbdev->ctlr->dev) { + pr_err("hyperbus: please fill all the necessary fields!\n"); + return -EINVAL; + } + + np = hbdev->np; + ctlr = hbdev->ctlr; + if (!of_device_is_compatible(np, "cypress,hyperflash")) + return -ENODEV; + + hbdev->memtype = HYPERFLASH; + + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; + + dev = ctlr->dev; + map = &hbdev->map; + map->size = resource_size(&res); + map->virt = devm_ioremap_resource(dev, &res); + if (IS_ERR(map->virt)) + return PTR_ERR(map->virt); + + map->name = dev_name(dev); + map->bankwidth = 2; + map->device_node = np; + + simple_map_init(map); + ops = ctlr->ops; + if (ops) { + if (ops->read16) + map->read = hyperbus_read16; + if (ops->write16) + map->write = hyperbus_write16; + if (ops->copy_to) + map->copy_to = hyperbus_copy_to; + if (ops->copy_from) + map->copy_from = hyperbus_copy_from; + + if (ops->calibrate && !ctlr->calibrated) { + ret = ops->calibrate(hbdev); + if (!ret) { + dev_err(dev, "Calibration failed\n"); + return -ENODEV; + } + ctlr->calibrated = true; + } + } + + hbdev->mtd = do_map_probe("cfi_probe", map); + if (!hbdev->mtd) { + dev_err(dev, "probing of hyperbus device failed\n"); + return -ENODEV; + } + + hbdev->mtd->dev.parent = dev; + mtd_set_of_node(hbdev->mtd, np); + + ret = mtd_device_register(hbdev->mtd, NULL, 0); + if (ret) { + dev_err(dev, "failed to register mtd device\n"); + map_destroy(hbdev->mtd); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(hyperbus_register_device); + +int hyperbus_unregister_device(struct hyperbus_device *hbdev) +{ + int ret = 0; + + if (hbdev && hbdev->mtd) { + ret = mtd_device_unregister(hbdev->mtd); + map_destroy(hbdev->mtd); + } + + return ret; +} +EXPORT_SYMBOL_GPL(hyperbus_unregister_device); + +MODULE_DESCRIPTION("HyperBus Framework"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>"); diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 7324ff832b41..170a7221b35f 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -437,7 +437,8 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) return err; } -static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +static int concat_xxlock(struct mtd_info *mtd, loff_t ofs, uint64_t len, + bool is_lock) { struct mtd_concat *concat = CONCAT(mtd); int i, err = -EINVAL; @@ -456,7 +457,10 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) else size = len; - err = mtd_lock(subdev, ofs, size); + if (is_lock) + err = mtd_lock(subdev, ofs, size); + else + err = mtd_unlock(subdev, ofs, size); if (err) break; @@ -471,35 +475,33 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) return err; } +static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + return concat_xxlock(mtd, ofs, len, true); +} + static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { + return concat_xxlock(mtd, ofs, len, false); +} + +static int concat_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ struct mtd_concat *concat = CONCAT(mtd); - int i, err = 0; + int i, err = -EINVAL; for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; - uint64_t size; if (ofs >= subdev->size) { - size = 0; ofs -= subdev->size; continue; } - if (ofs + len > subdev->size) - size = subdev->size - ofs; - else - size = len; - - err = mtd_unlock(subdev, ofs, size); - if (err) - break; - len -= size; - if (len == 0) + if (ofs + len > subdev->size) break; - err = -EINVAL; - ofs = 0; + return mtd_is_locked(subdev, ofs, len); } return err; @@ -704,6 +706,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->mtd._sync = concat_sync; concat->mtd._lock = concat_lock; concat->mtd._unlock = concat_unlock; + concat->mtd._is_locked = concat_is_locked; concat->mtd._suspend = concat_suspend; concat->mtd._resume = concat_resume; diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 453242d6cf56..408615f29e57 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1124,6 +1124,9 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, return -EROFS; if (!len) return 0; + if (!mtd->oops_panic_write) + mtd->oops_panic_write = true; + return mtd->_panic_write(mtd, to, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_panic_write); diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c index d759c02d9cb2..a1f8fe1abb10 100644 --- a/drivers/mtd/nand/onenand/onenand_base.c +++ b/drivers/mtd/nand/onenand/onenand_base.c @@ -3257,6 +3257,8 @@ static void onenand_check_features(struct mtd_info *mtd) /* Lock scheme */ switch (density) { + case ONENAND_DEVICE_DENSITY_8Gb: + this->options |= ONENAND_HAS_NOP_1; case ONENAND_DEVICE_DENSITY_4Gb: if (ONENAND_IS_DDP(this)) this->options |= ONENAND_HAS_2PLANE; @@ -3277,12 +3279,15 @@ static void onenand_check_features(struct mtd_info *mtd) if ((this->version_id & 0xf) == 0xe) this->options |= ONENAND_HAS_NOP_1; } + this->options |= ONENAND_HAS_UNLOCK_ALL; + break; case ONENAND_DEVICE_DENSITY_2Gb: /* 2Gb DDP does not have 2 plane */ if (!ONENAND_IS_DDP(this)) this->options |= ONENAND_HAS_2PLANE; this->options |= ONENAND_HAS_UNLOCK_ALL; + break; case ONENAND_DEVICE_DENSITY_1Gb: /* A-Die has all block unlock */ diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index 873527753f52..33310b8a6eb8 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -84,6 +84,12 @@ struct brcm_nand_dma_desc { #define FLASH_DMA_ECC_ERROR (1 << 8) #define FLASH_DMA_CORR_ERROR (1 << 9) +/* Bitfields for DMA_MODE */ +#define FLASH_DMA_MODE_STOP_ON_ERROR BIT(1) /* stop in Uncorr ECC error */ +#define FLASH_DMA_MODE_MODE BIT(0) /* link list */ +#define FLASH_DMA_MODE_MASK (FLASH_DMA_MODE_STOP_ON_ERROR | \ + FLASH_DMA_MODE_MODE) + /* 512B flash cache in the NAND controller HW */ #define FC_SHIFT 9U #define FC_BYTES 512U @@ -96,6 +102,51 @@ struct brcm_nand_dma_desc { #define NAND_CTRL_RDY (INTFC_CTLR_READY | INTFC_FLASH_READY) #define NAND_POLL_STATUS_TIMEOUT_MS 100 +/* flash_dma registers */ +enum flash_dma_reg { + FLASH_DMA_REVISION = 0, + FLASH_DMA_FIRST_DESC, + FLASH_DMA_FIRST_DESC_EXT, + FLASH_DMA_CTRL, + FLASH_DMA_MODE, + FLASH_DMA_STATUS, + FLASH_DMA_INTERRUPT_DESC, + FLASH_DMA_INTERRUPT_DESC_EXT, + FLASH_DMA_ERROR_STATUS, + FLASH_DMA_CURRENT_DESC, + FLASH_DMA_CURRENT_DESC_EXT, +}; + +/* flash_dma registers v1*/ +static const u16 flash_dma_regs_v1[] = { + [FLASH_DMA_REVISION] = 0x00, + [FLASH_DMA_FIRST_DESC] = 0x04, + [FLASH_DMA_FIRST_DESC_EXT] = 0x08, + [FLASH_DMA_CTRL] = 0x0c, + [FLASH_DMA_MODE] = 0x10, + [FLASH_DMA_STATUS] = 0x14, + [FLASH_DMA_INTERRUPT_DESC] = 0x18, + [FLASH_DMA_INTERRUPT_DESC_EXT] = 0x1c, + [FLASH_DMA_ERROR_STATUS] = 0x20, + [FLASH_DMA_CURRENT_DESC] = 0x24, + [FLASH_DMA_CURRENT_DESC_EXT] = 0x28, +}; + +/* flash_dma registers v4 */ +static const u16 flash_dma_regs_v4[] = { + [FLASH_DMA_REVISION] = 0x00, + [FLASH_DMA_FIRST_DESC] = 0x08, + [FLASH_DMA_FIRST_DESC_EXT] = 0x0c, + [FLASH_DMA_CTRL] = 0x10, + [FLASH_DMA_MODE] = 0x14, + [FLASH_DMA_STATUS] = 0x18, + [FLASH_DMA_INTERRUPT_DESC] = 0x20, + [FLASH_DMA_INTERRUPT_DESC_EXT] = 0x24, + [FLASH_DMA_ERROR_STATUS] = 0x28, + [FLASH_DMA_CURRENT_DESC] = 0x30, + [FLASH_DMA_CURRENT_DESC_EXT] = 0x34, +}; + /* Controller feature flags */ enum { BRCMNAND_HAS_1K_SECTORS = BIT(0), @@ -128,6 +179,8 @@ struct brcmnand_controller { /* List of NAND hosts (one for each chip-select) */ struct list_head host_list; + /* flash_dma reg */ + const u16 *flash_dma_offsets; struct brcm_nand_dma_desc *dma_desc; dma_addr_t dma_pa; @@ -151,6 +204,7 @@ struct brcmnand_controller { u32 nand_cs_nand_xor; u32 corr_stat_threshold; u32 flash_dma_mode; + bool pio_poll_mode; }; struct brcmnand_cfg { @@ -462,7 +516,7 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl) /* Register offsets */ if (ctrl->nand_version >= 0x0702) ctrl->reg_offsets = brcmnand_regs_v72; - else if (ctrl->nand_version >= 0x0701) + else if (ctrl->nand_version == 0x0701) ctrl->reg_offsets = brcmnand_regs_v71; else if (ctrl->nand_version >= 0x0600) ctrl->reg_offsets = brcmnand_regs_v60; @@ -507,7 +561,7 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl) } /* Maximum spare area sector size (per 512B) */ - if (ctrl->nand_version >= 0x0702) + if (ctrl->nand_version == 0x0702) ctrl->max_oob = 128; else if (ctrl->nand_version >= 0x0600) ctrl->max_oob = 64; @@ -538,6 +592,15 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl) return 0; } +static void brcmnand_flash_dma_revision_init(struct brcmnand_controller *ctrl) +{ + /* flash_dma register offsets */ + if (ctrl->nand_version >= 0x0703) + ctrl->flash_dma_offsets = flash_dma_regs_v4; + else + ctrl->flash_dma_offsets = flash_dma_regs_v1; +} + static inline u32 brcmnand_read_reg(struct brcmnand_controller *ctrl, enum brcmnand_reg reg) { @@ -580,6 +643,54 @@ static inline void brcmnand_write_fc(struct brcmnand_controller *ctrl, __raw_writel(val, ctrl->nand_fc + word * 4); } +static void brcmnand_clear_ecc_addr(struct brcmnand_controller *ctrl) +{ + + /* Clear error addresses */ + brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_ADDR, 0); + brcmnand_write_reg(ctrl, BRCMNAND_CORR_ADDR, 0); + brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_EXT_ADDR, 0); + brcmnand_write_reg(ctrl, BRCMNAND_CORR_EXT_ADDR, 0); +} + +static u64 brcmnand_get_uncorrecc_addr(struct brcmnand_controller *ctrl) +{ + u64 err_addr; + + err_addr = brcmnand_read_reg(ctrl, BRCMNAND_UNCORR_ADDR); + err_addr |= ((u64)(brcmnand_read_reg(ctrl, + BRCMNAND_UNCORR_EXT_ADDR) + & 0xffff) << 32); + + return err_addr; +} + +static u64 brcmnand_get_correcc_addr(struct brcmnand_controller *ctrl) +{ + u64 err_addr; + + err_addr = brcmnand_read_reg(ctrl, BRCMNAND_CORR_ADDR); + err_addr |= ((u64)(brcmnand_read_reg(ctrl, + BRCMNAND_CORR_EXT_ADDR) + & 0xffff) << 32); + + return err_addr; +} + +static void brcmnand_set_cmd_addr(struct mtd_info *mtd, u64 addr) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_controller *ctrl = host->ctrl; + + brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS, + (host->cs << 16) | ((addr >> 32) & 0xffff)); + (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS); + brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS, + lower_32_bits(addr)); + (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS); +} + static inline u16 brcmnand_cs_offset(struct brcmnand_controller *ctrl, int cs, enum brcmnand_cs_reg reg) { @@ -612,7 +723,7 @@ static void brcmnand_wr_corr_thresh(struct brcmnand_host *host, u8 val) enum brcmnand_reg reg = BRCMNAND_CORR_THRESHOLD; int cs = host->cs; - if (ctrl->nand_version >= 0x0702) + if (ctrl->nand_version == 0x0702) bits = 7; else if (ctrl->nand_version >= 0x0600) bits = 6; @@ -666,7 +777,7 @@ enum { static inline u32 brcmnand_spare_area_mask(struct brcmnand_controller *ctrl) { - if (ctrl->nand_version >= 0x0702) + if (ctrl->nand_version == 0x0702) return GENMASK(7, 0); else if (ctrl->nand_version >= 0x0600) return GENMASK(6, 0); @@ -796,39 +907,44 @@ static inline void brcmnand_set_wp(struct brcmnand_controller *ctrl, bool en) * Flash DMA ***********************************************************************/ -enum flash_dma_reg { - FLASH_DMA_REVISION = 0x00, - FLASH_DMA_FIRST_DESC = 0x04, - FLASH_DMA_FIRST_DESC_EXT = 0x08, - FLASH_DMA_CTRL = 0x0c, - FLASH_DMA_MODE = 0x10, - FLASH_DMA_STATUS = 0x14, - FLASH_DMA_INTERRUPT_DESC = 0x18, - FLASH_DMA_INTERRUPT_DESC_EXT = 0x1c, - FLASH_DMA_ERROR_STATUS = 0x20, - FLASH_DMA_CURRENT_DESC = 0x24, - FLASH_DMA_CURRENT_DESC_EXT = 0x28, -}; - static inline bool has_flash_dma(struct brcmnand_controller *ctrl) { return ctrl->flash_dma_base; } +static inline void disable_ctrl_irqs(struct brcmnand_controller *ctrl) +{ + if (ctrl->pio_poll_mode) + return; + + if (has_flash_dma(ctrl)) { + ctrl->flash_dma_base = 0; + disable_irq(ctrl->dma_irq); + } + + disable_irq(ctrl->irq); + ctrl->pio_poll_mode = true; +} + static inline bool flash_dma_buf_ok(const void *buf) { return buf && !is_vmalloc_addr(buf) && likely(IS_ALIGNED((uintptr_t)buf, 4)); } -static inline void flash_dma_writel(struct brcmnand_controller *ctrl, u8 offs, - u32 val) +static inline void flash_dma_writel(struct brcmnand_controller *ctrl, + enum flash_dma_reg dma_reg, u32 val) { + u16 offs = ctrl->flash_dma_offsets[dma_reg]; + brcmnand_writel(val, ctrl->flash_dma_base + offs); } -static inline u32 flash_dma_readl(struct brcmnand_controller *ctrl, u8 offs) +static inline u32 flash_dma_readl(struct brcmnand_controller *ctrl, + enum flash_dma_reg dma_reg) { + u16 offs = ctrl->flash_dma_offsets[dma_reg]; + return brcmnand_readl(ctrl->flash_dma_base + offs); } @@ -931,7 +1047,7 @@ static int brcmnand_bch_ooblayout_ecc(struct mtd_info *mtd, int section, if (section >= sectors) return -ERANGE; - oobregion->offset = (section * (sas + 1)) - chip->ecc.bytes; + oobregion->offset = ((section + 1) * sas) - chip->ecc.bytes; oobregion->length = chip->ecc.bytes; return 0; @@ -1205,9 +1321,12 @@ static void brcmnand_send_cmd(struct brcmnand_host *host, int cmd) { struct brcmnand_controller *ctrl = host->ctrl; int ret; + u64 cmd_addr; + + cmd_addr = brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS); + + dev_dbg(ctrl->dev, "send native cmd %d addr 0x%llx\n", cmd, cmd_addr); - dev_dbg(ctrl->dev, "send native cmd %d addr_lo 0x%x\n", cmd, - brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS)); BUG_ON(ctrl->cmd_pending != 0); ctrl->cmd_pending = cmd; @@ -1229,15 +1348,42 @@ static void brcmnand_cmd_ctrl(struct nand_chip *chip, int dat, /* intentionally left blank */ } +static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip) +{ + struct brcmnand_host *host = nand_get_controller_data(chip); + struct brcmnand_controller *ctrl = host->ctrl; + struct mtd_info *mtd = nand_to_mtd(chip); + bool err = false; + int sts; + + if (mtd->oops_panic_write) { + /* switch to interrupt polling and PIO mode */ + disable_ctrl_irqs(ctrl); + sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY, + NAND_CTRL_RDY, 0); + err = (sts < 0) ? true : false; + } else { + unsigned long timeo = msecs_to_jiffies( + NAND_POLL_STATUS_TIMEOUT_MS); + /* wait for completion interrupt */ + sts = wait_for_completion_timeout(&ctrl->done, timeo); + err = (sts <= 0) ? true : false; + } + + return err; +} + static int brcmnand_waitfunc(struct nand_chip *chip) { struct brcmnand_host *host = nand_get_controller_data(chip); struct brcmnand_controller *ctrl = host->ctrl; - unsigned long timeo = msecs_to_jiffies(100); + bool err = false; dev_dbg(ctrl->dev, "wait on native cmd %d\n", ctrl->cmd_pending); - if (ctrl->cmd_pending && - wait_for_completion_timeout(&ctrl->done, timeo) <= 0) { + if (ctrl->cmd_pending) + err = brcmstb_nand_wait_for_completion(chip); + + if (err) { u32 cmd = brcmnand_read_reg(ctrl, BRCMNAND_CMD_START) >> brcmnand_cmd_shift(ctrl); @@ -1366,12 +1512,7 @@ static void brcmnand_cmdfunc(struct nand_chip *chip, unsigned command, if (!native_cmd) return; - brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS, - (host->cs << 16) | ((addr >> 32) & 0xffff)); - (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS); - brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS, lower_32_bits(addr)); - (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS); - + brcmnand_set_cmd_addr(mtd, addr); brcmnand_send_cmd(host, native_cmd); brcmnand_waitfunc(chip); @@ -1589,20 +1730,10 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip, struct brcmnand_controller *ctrl = host->ctrl; int i, j, ret = 0; - /* Clear error addresses */ - brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_ADDR, 0); - brcmnand_write_reg(ctrl, BRCMNAND_CORR_ADDR, 0); - brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_EXT_ADDR, 0); - brcmnand_write_reg(ctrl, BRCMNAND_CORR_EXT_ADDR, 0); - - brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS, - (host->cs << 16) | ((addr >> 32) & 0xffff)); - (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS); + brcmnand_clear_ecc_addr(ctrl); for (i = 0; i < trans; i++, addr += FC_BYTES) { - brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS, - lower_32_bits(addr)); - (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS); + brcmnand_set_cmd_addr(mtd, addr); /* SPARE_AREA_READ does not use ECC, so just use PAGE_READ */ brcmnand_send_cmd(host, CMD_PAGE_READ); brcmnand_waitfunc(chip); @@ -1622,21 +1753,15 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip, host->hwcfg.sector_size_1k); if (!ret) { - *err_addr = brcmnand_read_reg(ctrl, - BRCMNAND_UNCORR_ADDR) | - ((u64)(brcmnand_read_reg(ctrl, - BRCMNAND_UNCORR_EXT_ADDR) - & 0xffff) << 32); + *err_addr = brcmnand_get_uncorrecc_addr(ctrl); + if (*err_addr) ret = -EBADMSG; } if (!ret) { - *err_addr = brcmnand_read_reg(ctrl, - BRCMNAND_CORR_ADDR) | - ((u64)(brcmnand_read_reg(ctrl, - BRCMNAND_CORR_EXT_ADDR) - & 0xffff) << 32); + *err_addr = brcmnand_get_correcc_addr(ctrl); + if (*err_addr) ret = -EUCLEAN; } @@ -1703,7 +1828,7 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip, dev_dbg(ctrl->dev, "read %llx -> %p\n", (unsigned long long)addr, buf); try_dmaread: - brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_COUNT, 0); + brcmnand_clear_ecc_addr(ctrl); if (has_flash_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) { err = brcmnand_dma_trans(host, addr, buf, trans * FC_BYTES, @@ -1850,15 +1975,9 @@ static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip, goto out; } - brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS, - (host->cs << 16) | ((addr >> 32) & 0xffff)); - (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS); - for (i = 0; i < trans; i++, addr += FC_BYTES) { /* full address MUST be set before populating FC */ - brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS, - lower_32_bits(addr)); - (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS); + brcmnand_set_cmd_addr(mtd, addr); if (buf) { brcmnand_soc_data_bus_prepare(ctrl->soc, false); @@ -2136,6 +2255,17 @@ static int brcmnand_setup_dev(struct brcmnand_host *host) return -EINVAL; } + if (chip->ecc.mode != NAND_ECC_NONE && + (!chip->ecc.size || !chip->ecc.strength)) { + if (chip->base.eccreq.step_size && chip->base.eccreq.strength) { + /* use detected ECC parameters */ + chip->ecc.size = chip->base.eccreq.step_size; + chip->ecc.strength = chip->base.eccreq.strength; + dev_info(ctrl->dev, "Using ECC step-size %d, strength %d\n", + chip->ecc.size, chip->ecc.strength); + } + } + switch (chip->ecc.size) { case 512: if (chip->ecc.algo == NAND_ECC_HAMMING) @@ -2395,6 +2525,7 @@ static const struct of_device_id brcmnand_of_match[] = { { .compatible = "brcm,brcmnand-v7.0" }, { .compatible = "brcm,brcmnand-v7.1" }, { .compatible = "brcm,brcmnand-v7.2" }, + { .compatible = "brcm,brcmnand-v7.3" }, {}, }; MODULE_DEVICE_TABLE(of, brcmnand_of_match); @@ -2481,7 +2612,11 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc) goto err; } - flash_dma_writel(ctrl, FLASH_DMA_MODE, 1); /* linked-list */ + /* initialize the dma version */ + brcmnand_flash_dma_revision_init(ctrl); + + /* linked-list and stop on error */ + flash_dma_writel(ctrl, FLASH_DMA_MODE, FLASH_DMA_MODE_MASK); flash_dma_writel(ctrl, FLASH_DMA_ERROR_STATUS, 0); /* Allocate descriptor(s) */ diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index 6c7ca41354be..a6964feeec77 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -613,28 +613,20 @@ static int fsmc_exec_op(struct nand_chip *chip, const struct nand_operation *op, for (op_id = 0; op_id < op->ninstrs; op_id++) { instr = &op->instrs[op_id]; + nand_op_trace(" ", instr); + switch (instr->type) { case NAND_OP_CMD_INSTR: - pr_debug(" ->CMD [0x%02x]\n", - instr->ctx.cmd.opcode); - writeb_relaxed(instr->ctx.cmd.opcode, host->cmd_va); break; case NAND_OP_ADDR_INSTR: - pr_debug(" ->ADDR [%d cyc]", - instr->ctx.addr.naddrs); - for (i = 0; i < instr->ctx.addr.naddrs; i++) writeb_relaxed(instr->ctx.addr.addrs[i], host->addr_va); break; case NAND_OP_DATA_IN_INSTR: - pr_debug(" ->DATA_IN [%d B%s]\n", instr->ctx.data.len, - instr->ctx.data.force_8bit ? - ", force 8-bit" : ""); - if (host->mode == USE_DMA_ACCESS) fsmc_read_buf_dma(host, instr->ctx.data.buf.in, instr->ctx.data.len); @@ -644,10 +636,6 @@ static int fsmc_exec_op(struct nand_chip *chip, const struct nand_operation *op, break; case NAND_OP_DATA_OUT_INSTR: - pr_debug(" ->DATA_OUT [%d B%s]\n", instr->ctx.data.len, - instr->ctx.data.force_8bit ? - ", force 8-bit" : ""); - if (host->mode == USE_DMA_ACCESS) fsmc_write_buf_dma(host, instr->ctx.data.buf.out, @@ -658,9 +646,6 @@ static int fsmc_exec_op(struct nand_chip *chip, const struct nand_operation *op, break; case NAND_OP_WAITRDY_INSTR: - pr_debug(" ->WAITRDY [max %d ms]\n", - instr->ctx.waitrdy.timeout_ms); - ret = nand_soft_waitrdy(chip, instr->ctx.waitrdy.timeout_ms); break; diff --git a/drivers/mtd/nand/raw/gpmi-nand/Makefile b/drivers/mtd/nand/raw/gpmi-nand/Makefile index 30ceee9704d1..9bd81a31e02e 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/Makefile +++ b/drivers/mtd/nand/raw/gpmi-nand/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o gpmi_nand-objs += gpmi-nand.o -gpmi_nand-objs += gpmi-lib.o diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c deleted file mode 100644 index a8b26d2e793c..000000000000 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c +++ /dev/null @@ -1,934 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Freescale GPMI NAND Flash Driver - * - * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. - * Copyright (C) 2008 Embedded Alley Solutions, Inc. - */ -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/slab.h> - -#include "gpmi-nand.h" -#include "gpmi-regs.h" -#include "bch-regs.h" - -/* Converts time to clock cycles */ -#define TO_CYCLES(duration, period) DIV_ROUND_UP_ULL(duration, period) - -#define MXS_SET_ADDR 0x4 -#define MXS_CLR_ADDR 0x8 -/* - * Clear the bit and poll it cleared. This is usually called with - * a reset address and mask being either SFTRST(bit 31) or CLKGATE - * (bit 30). - */ -static int clear_poll_bit(void __iomem *addr, u32 mask) -{ - int timeout = 0x400; - - /* clear the bit */ - writel(mask, addr + MXS_CLR_ADDR); - - /* - * SFTRST needs 3 GPMI clocks to settle, the reference manual - * recommends to wait 1us. - */ - udelay(1); - - /* poll the bit becoming clear */ - while ((readl(addr) & mask) && --timeout) - /* nothing */; - - return !timeout; -} - -#define MODULE_CLKGATE (1 << 30) -#define MODULE_SFTRST (1 << 31) -/* - * The current mxs_reset_block() will do two things: - * [1] enable the module. - * [2] reset the module. - * - * In most of the cases, it's ok. - * But in MX23, there is a hardware bug in the BCH block (see erratum #2847). - * If you try to soft reset the BCH block, it becomes unusable until - * the next hard reset. This case occurs in the NAND boot mode. When the board - * boots by NAND, the ROM of the chip will initialize the BCH blocks itself. - * So If the driver tries to reset the BCH again, the BCH will not work anymore. - * You will see a DMA timeout in this case. The bug has been fixed - * in the following chips, such as MX28. - * - * To avoid this bug, just add a new parameter `just_enable` for - * the mxs_reset_block(), and rewrite it here. - */ -static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) -{ - int ret; - int timeout = 0x400; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear CLKGATE */ - writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR); - - if (!just_enable) { - /* set SFTRST to reset the block */ - writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR); - udelay(1); - - /* poll CLKGATE becoming set */ - while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout) - /* nothing */; - if (unlikely(!timeout)) - goto error; - } - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear and poll CLKGATE */ - ret = clear_poll_bit(reset_addr, MODULE_CLKGATE); - if (unlikely(ret)) - goto error; - - return 0; - -error: - pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); - return -ETIMEDOUT; -} - -static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v) -{ - struct clk *clk; - int ret; - int i; - - for (i = 0; i < GPMI_CLK_MAX; i++) { - clk = this->resources.clock[i]; - if (!clk) - break; - - if (v) { - ret = clk_prepare_enable(clk); - if (ret) - goto err_clk; - } else { - clk_disable_unprepare(clk); - } - } - return 0; - -err_clk: - for (; i > 0; i--) - clk_disable_unprepare(this->resources.clock[i - 1]); - return ret; -} - -int gpmi_enable_clk(struct gpmi_nand_data *this) -{ - return __gpmi_enable_clk(this, true); -} - -int gpmi_disable_clk(struct gpmi_nand_data *this) -{ - return __gpmi_enable_clk(this, false); -} - -int gpmi_init(struct gpmi_nand_data *this) -{ - struct resources *r = &this->resources; - int ret; - - ret = gpmi_enable_clk(this); - if (ret) - return ret; - ret = gpmi_reset_block(r->gpmi_regs, false); - if (ret) - goto err_out; - - /* - * Reset BCH here, too. We got failures otherwise :( - * See later BCH reset for explanation of MX23 and MX28 handling - */ - ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this)); - if (ret) - goto err_out; - - /* Choose NAND mode. */ - writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR); - - /* Set the IRQ polarity. */ - writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY, - r->gpmi_regs + HW_GPMI_CTRL1_SET); - - /* Disable Write-Protection. */ - writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET); - - /* Select BCH ECC. */ - writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); - - /* - * Decouple the chip select from dma channel. We use dma0 for all - * the chips. - */ - writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET); - - gpmi_disable_clk(this); - return 0; -err_out: - gpmi_disable_clk(this); - return ret; -} - -/* This function is very useful. It is called only when the bug occur. */ -void gpmi_dump_info(struct gpmi_nand_data *this) -{ - struct resources *r = &this->resources; - struct bch_geometry *geo = &this->bch_geometry; - u32 reg; - int i; - - dev_err(this->dev, "Show GPMI registers :\n"); - for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) { - reg = readl(r->gpmi_regs + i * 0x10); - dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); - } - - /* start to print out the BCH info */ - dev_err(this->dev, "Show BCH registers :\n"); - for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) { - reg = readl(r->bch_regs + i * 0x10); - dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); - } - dev_err(this->dev, "BCH Geometry :\n" - "GF length : %u\n" - "ECC Strength : %u\n" - "Page Size in Bytes : %u\n" - "Metadata Size in Bytes : %u\n" - "ECC Chunk Size in Bytes: %u\n" - "ECC Chunk Count : %u\n" - "Payload Size in Bytes : %u\n" - "Auxiliary Size in Bytes: %u\n" - "Auxiliary Status Offset: %u\n" - "Block Mark Byte Offset : %u\n" - "Block Mark Bit Offset : %u\n", - geo->gf_len, - geo->ecc_strength, - geo->page_size, - geo->metadata_size, - geo->ecc_chunk_size, - geo->ecc_chunk_count, - geo->payload_size, - geo->auxiliary_size, - geo->auxiliary_status_offset, - geo->block_mark_byte_offset, - geo->block_mark_bit_offset); -} - -/* Configures the geometry for BCH. */ -int bch_set_geometry(struct gpmi_nand_data *this) -{ - struct resources *r = &this->resources; - struct bch_geometry *bch_geo = &this->bch_geometry; - unsigned int block_count; - unsigned int block_size; - unsigned int metadata_size; - unsigned int ecc_strength; - unsigned int page_size; - unsigned int gf_len; - int ret; - - ret = common_nfc_set_geometry(this); - if (ret) - return ret; - - block_count = bch_geo->ecc_chunk_count - 1; - block_size = bch_geo->ecc_chunk_size; - metadata_size = bch_geo->metadata_size; - ecc_strength = bch_geo->ecc_strength >> 1; - page_size = bch_geo->page_size; - gf_len = bch_geo->gf_len; - - ret = gpmi_enable_clk(this); - if (ret) - return ret; - - /* - * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this - * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. - * and MX28. - */ - ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this)); - if (ret) - goto err_out; - - /* Configure layout 0. */ - writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count) - | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size) - | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) - | BF_BCH_FLASH0LAYOUT0_GF(gf_len, this) - | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this), - r->bch_regs + HW_BCH_FLASH0LAYOUT0); - - writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size) - | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) - | BF_BCH_FLASH0LAYOUT1_GF(gf_len, this) - | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this), - r->bch_regs + HW_BCH_FLASH0LAYOUT1); - - /* Set *all* chip selects to use layout 0. */ - writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT); - - /* Enable interrupts. */ - writel(BM_BCH_CTRL_COMPLETE_IRQ_EN, - r->bch_regs + HW_BCH_CTRL_SET); - - gpmi_disable_clk(this); - return 0; -err_out: - gpmi_disable_clk(this); - return ret; -} - -/* - * <1> Firstly, we should know what's the GPMI-clock means. - * The GPMI-clock is the internal clock in the gpmi nand controller. - * If you set 100MHz to gpmi nand controller, the GPMI-clock's period - * is 10ns. Mark the GPMI-clock's period as GPMI-clock-period. - * - * <2> Secondly, we should know what's the frequency on the nand chip pins. - * The frequency on the nand chip pins is derived from the GPMI-clock. - * We can get it from the following equation: - * - * F = G / (DS + DH) - * - * F : the frequency on the nand chip pins. - * G : the GPMI clock, such as 100MHz. - * DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP - * DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD - * - * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz, - * the nand EDO(extended Data Out) timing could be applied. - * The GPMI implements a feedback read strobe to sample the read data. - * The feedback read strobe can be delayed to support the nand EDO timing - * where the read strobe may deasserts before the read data is valid, and - * read data is valid for some time after read strobe. - * - * The following figure illustrates some aspects of a NAND Flash read: - * - * |<---tREA---->| - * | | - * | | | - * |<--tRP-->| | - * | | | - * __ ___|__________________________________ - * RDN \________/ | - * | - * /---------\ - * Read Data --------------< >--------- - * \---------/ - * | | - * |<-D->| - * FeedbackRDN ________ ____________ - * \___________/ - * - * D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY. - * - * - * <4> Now, we begin to describe how to compute the right RDN_DELAY. - * - * 4.1) From the aspect of the nand chip pins: - * Delay = (tREA + C - tRP) {1} - * - * tREA : the maximum read access time. - * C : a constant to adjust the delay. default is 4000ps. - * tRP : the read pulse width, which is exactly: - * tRP = (GPMI-clock-period) * DATA_SETUP - * - * 4.2) From the aspect of the GPMI nand controller: - * Delay = RDN_DELAY * 0.125 * RP {2} - * - * RP : the DLL reference period. - * if (GPMI-clock-period > DLL_THRETHOLD) - * RP = GPMI-clock-period / 2; - * else - * RP = GPMI-clock-period; - * - * Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period - * is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD - * is 16000ps, but in mx6q, we use 12000ps. - * - * 4.3) since {1} equals {2}, we get: - * - * (tREA + 4000 - tRP) * 8 - * RDN_DELAY = ----------------------- {3} - * RP - */ -static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this, - const struct nand_sdr_timings *sdr) -{ - struct gpmi_nfc_hardware_timing *hw = &this->hw; - unsigned int dll_threshold_ps = this->devdata->max_chain_delay; - unsigned int period_ps, reference_period_ps; - unsigned int data_setup_cycles, data_hold_cycles, addr_setup_cycles; - unsigned int tRP_ps; - bool use_half_period; - int sample_delay_ps, sample_delay_factor; - u16 busy_timeout_cycles; - u8 wrn_dly_sel; - - if (sdr->tRC_min >= 30000) { - /* ONFI non-EDO modes [0-3] */ - hw->clk_rate = 22000000; - wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS; - } else if (sdr->tRC_min >= 25000) { - /* ONFI EDO mode 4 */ - hw->clk_rate = 80000000; - wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; - } else { - /* ONFI EDO mode 5 */ - hw->clk_rate = 100000000; - wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; - } - - /* SDR core timings are given in picoseconds */ - period_ps = div_u64((u64)NSEC_PER_SEC * 1000, hw->clk_rate); - - addr_setup_cycles = TO_CYCLES(sdr->tALS_min, period_ps); - data_setup_cycles = TO_CYCLES(sdr->tDS_min, period_ps); - data_hold_cycles = TO_CYCLES(sdr->tDH_min, period_ps); - busy_timeout_cycles = TO_CYCLES(sdr->tWB_max + sdr->tR_max, period_ps); - - hw->timing0 = BF_GPMI_TIMING0_ADDRESS_SETUP(addr_setup_cycles) | - BF_GPMI_TIMING0_DATA_HOLD(data_hold_cycles) | - BF_GPMI_TIMING0_DATA_SETUP(data_setup_cycles); - hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(busy_timeout_cycles * 4096); - - /* - * Derive NFC ideal delay from {3}: - * - * (tREA + 4000 - tRP) * 8 - * RDN_DELAY = ----------------------- - * RP - */ - if (period_ps > dll_threshold_ps) { - use_half_period = true; - reference_period_ps = period_ps / 2; - } else { - use_half_period = false; - reference_period_ps = period_ps; - } - - tRP_ps = data_setup_cycles * period_ps; - sample_delay_ps = (sdr->tREA_max + 4000 - tRP_ps) * 8; - if (sample_delay_ps > 0) - sample_delay_factor = sample_delay_ps / reference_period_ps; - else - sample_delay_factor = 0; - - hw->ctrl1n = BF_GPMI_CTRL1_WRN_DLY_SEL(wrn_dly_sel); - if (sample_delay_factor) - hw->ctrl1n |= BF_GPMI_CTRL1_RDN_DELAY(sample_delay_factor) | - BM_GPMI_CTRL1_DLL_ENABLE | - (use_half_period ? BM_GPMI_CTRL1_HALF_PERIOD : 0); -} - -void gpmi_nfc_apply_timings(struct gpmi_nand_data *this) -{ - struct gpmi_nfc_hardware_timing *hw = &this->hw; - struct resources *r = &this->resources; - void __iomem *gpmi_regs = r->gpmi_regs; - unsigned int dll_wait_time_us; - - clk_set_rate(r->clock[0], hw->clk_rate); - - writel(hw->timing0, gpmi_regs + HW_GPMI_TIMING0); - writel(hw->timing1, gpmi_regs + HW_GPMI_TIMING1); - - /* - * Clear several CTRL1 fields, DLL must be disabled when setting - * RDN_DELAY or HALF_PERIOD. - */ - writel(BM_GPMI_CTRL1_CLEAR_MASK, gpmi_regs + HW_GPMI_CTRL1_CLR); - writel(hw->ctrl1n, gpmi_regs + HW_GPMI_CTRL1_SET); - - /* Wait 64 clock cycles before using the GPMI after enabling the DLL */ - dll_wait_time_us = USEC_PER_SEC / hw->clk_rate * 64; - if (!dll_wait_time_us) - dll_wait_time_us = 1; - - /* Wait for the DLL to settle. */ - udelay(dll_wait_time_us); -} - -int gpmi_setup_data_interface(struct nand_chip *chip, int chipnr, - const struct nand_data_interface *conf) -{ - struct gpmi_nand_data *this = nand_get_controller_data(chip); - const struct nand_sdr_timings *sdr; - - /* Retrieve required NAND timings */ - sdr = nand_get_sdr_timings(conf); - if (IS_ERR(sdr)) - return PTR_ERR(sdr); - - /* Only MX6 GPMI controller can reach EDO timings */ - if (sdr->tRC_min <= 25000 && !GPMI_IS_MX6(this)) - return -ENOTSUPP; - - /* Stop here if this call was just a check */ - if (chipnr < 0) - return 0; - - /* Do the actual derivation of the controller timings */ - gpmi_nfc_compute_timings(this, sdr); - - this->hw.must_apply_timings = true; - - return 0; -} - -/* Clears a BCH interrupt. */ -void gpmi_clear_bch(struct gpmi_nand_data *this) -{ - struct resources *r = &this->resources; - writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR); -} - -/* Returns the Ready/Busy status of the given chip. */ -int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) -{ - struct resources *r = &this->resources; - uint32_t mask = 0; - uint32_t reg = 0; - - if (GPMI_IS_MX23(this)) { - mask = MX23_BM_GPMI_DEBUG_READY0 << chip; - reg = readl(r->gpmi_regs + HW_GPMI_DEBUG); - } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) { - /* - * In the imx6, all the ready/busy pins are bound - * together. So we only need to check chip 0. - */ - if (GPMI_IS_MX6(this)) - chip = 0; - - /* MX28 shares the same R/B register as MX6Q. */ - mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip); - reg = readl(r->gpmi_regs + HW_GPMI_STAT); - } else - dev_err(this->dev, "unknown arch.\n"); - return reg & mask; -} - -int gpmi_send_command(struct gpmi_nand_data *this) -{ - struct dma_chan *channel = get_dma_chan(this); - struct dma_async_tx_descriptor *desc; - struct scatterlist *sgl; - int chip = this->current_chip; - int ret; - u32 pio[3]; - - /* [1] send out the PIO words */ - pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE) - | BM_GPMI_CTRL0_WORD_LENGTH - | BF_GPMI_CTRL0_CS(chip, this) - | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) - | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE) - | BM_GPMI_CTRL0_ADDRESS_INCREMENT - | BF_GPMI_CTRL0_XFER_COUNT(this->command_length); - pio[1] = pio[2] = 0; - desc = dmaengine_prep_slave_sg(channel, - (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) - return -EINVAL; - - /* [2] send out the COMMAND + ADDRESS string stored in @buffer */ - sgl = &this->cmd_sgl; - - sg_init_one(sgl, this->cmd_buffer, this->command_length); - dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE); - desc = dmaengine_prep_slave_sg(channel, - sgl, 1, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) - return -EINVAL; - - /* [3] submit the DMA */ - ret = start_dma_without_bch_irq(this, desc); - - dma_unmap_sg(this->dev, sgl, 1, DMA_TO_DEVICE); - - return ret; -} - -int gpmi_send_data(struct gpmi_nand_data *this, const void *buf, int len) -{ - struct dma_async_tx_descriptor *desc; - struct dma_chan *channel = get_dma_chan(this); - int chip = this->current_chip; - int ret; - uint32_t command_mode; - uint32_t address; - u32 pio[2]; - - /* [1] PIO */ - command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE; - address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA; - - pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode) - | BM_GPMI_CTRL0_WORD_LENGTH - | BF_GPMI_CTRL0_CS(chip, this) - | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) - | BF_GPMI_CTRL0_ADDRESS(address) - | BF_GPMI_CTRL0_XFER_COUNT(len); - pio[1] = 0; - desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) - return -EINVAL; - - /* [2] send DMA request */ - prepare_data_dma(this, buf, len, DMA_TO_DEVICE); - desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) - return -EINVAL; - - /* [3] submit the DMA */ - ret = start_dma_without_bch_irq(this, desc); - - dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE); - - return ret; -} - -int gpmi_read_data(struct gpmi_nand_data *this, void *buf, int len) -{ - struct dma_async_tx_descriptor *desc; - struct dma_chan *channel = get_dma_chan(this); - int chip = this->current_chip; - int ret; - u32 pio[2]; - bool direct; - - /* [1] : send PIO */ - pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ) - | BM_GPMI_CTRL0_WORD_LENGTH - | BF_GPMI_CTRL0_CS(chip, this) - | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) - | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA) - | BF_GPMI_CTRL0_XFER_COUNT(len); - pio[1] = 0; - desc = dmaengine_prep_slave_sg(channel, - (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) - return -EINVAL; - - /* [2] : send DMA request */ - direct = prepare_data_dma(this, buf, len, DMA_FROM_DEVICE); - desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) - return -EINVAL; - - /* [3] : submit the DMA */ - - ret = start_dma_without_bch_irq(this, desc); - - dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE); - if (!direct) - memcpy(buf, this->data_buffer_dma, len); - - return ret; -} - -int gpmi_send_page(struct gpmi_nand_data *this, - dma_addr_t payload, dma_addr_t auxiliary) -{ - struct bch_geometry *geo = &this->bch_geometry; - uint32_t command_mode; - uint32_t address; - uint32_t ecc_command; - uint32_t buffer_mask; - struct dma_async_tx_descriptor *desc; - struct dma_chan *channel = get_dma_chan(this); - int chip = this->current_chip; - u32 pio[6]; - - /* A DMA descriptor that does an ECC page read. */ - command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE; - address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA; - ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE; - buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE | - BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY; - - pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode) - | BM_GPMI_CTRL0_WORD_LENGTH - | BF_GPMI_CTRL0_CS(chip, this) - | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) - | BF_GPMI_CTRL0_ADDRESS(address) - | BF_GPMI_CTRL0_XFER_COUNT(0); - pio[1] = 0; - pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC - | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command) - | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask); - pio[3] = geo->page_size; - pio[4] = payload; - pio[5] = auxiliary; - - desc = dmaengine_prep_slave_sg(channel, - (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, - DMA_CTRL_ACK); - if (!desc) - return -EINVAL; - - return start_dma_with_bch_irq(this, desc); -} - -int gpmi_read_page(struct gpmi_nand_data *this, - dma_addr_t payload, dma_addr_t auxiliary) -{ - struct bch_geometry *geo = &this->bch_geometry; - uint32_t command_mode; - uint32_t address; - uint32_t ecc_command; - uint32_t buffer_mask; - struct dma_async_tx_descriptor *desc; - struct dma_chan *channel = get_dma_chan(this); - int chip = this->current_chip; - u32 pio[6]; - - /* [1] Wait for the chip to report ready. */ - command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY; - address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA; - - pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode) - | BM_GPMI_CTRL0_WORD_LENGTH - | BF_GPMI_CTRL0_CS(chip, this) - | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) - | BF_GPMI_CTRL0_ADDRESS(address) - | BF_GPMI_CTRL0_XFER_COUNT(0); - pio[1] = 0; - desc = dmaengine_prep_slave_sg(channel, - (struct scatterlist *)pio, 2, - DMA_TRANS_NONE, 0); - if (!desc) - return -EINVAL; - - /* [2] Enable the BCH block and read. */ - command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ; - address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA; - ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE; - buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE - | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY; - - pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode) - | BM_GPMI_CTRL0_WORD_LENGTH - | BF_GPMI_CTRL0_CS(chip, this) - | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) - | BF_GPMI_CTRL0_ADDRESS(address) - | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size); - - pio[1] = 0; - pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC - | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command) - | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask); - pio[3] = geo->page_size; - pio[4] = payload; - pio[5] = auxiliary; - desc = dmaengine_prep_slave_sg(channel, - (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) - return -EINVAL; - - /* [3] Disable the BCH block */ - command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY; - address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA; - - pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode) - | BM_GPMI_CTRL0_WORD_LENGTH - | BF_GPMI_CTRL0_CS(chip, this) - | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) - | BF_GPMI_CTRL0_ADDRESS(address) - | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size); - pio[1] = 0; - pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */ - desc = dmaengine_prep_slave_sg(channel, - (struct scatterlist *)pio, 3, - DMA_TRANS_NONE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) - return -EINVAL; - - /* [4] submit the DMA */ - return start_dma_with_bch_irq(this, desc); -} - -/** - * gpmi_copy_bits - copy bits from one memory region to another - * @dst: destination buffer - * @dst_bit_off: bit offset we're starting to write at - * @src: source buffer - * @src_bit_off: bit offset we're starting to read from - * @nbits: number of bits to copy - * - * This functions copies bits from one memory region to another, and is used by - * the GPMI driver to copy ECC sections which are not guaranteed to be byte - * aligned. - * - * src and dst should not overlap. - * - */ -void gpmi_copy_bits(u8 *dst, size_t dst_bit_off, - const u8 *src, size_t src_bit_off, - size_t nbits) -{ - size_t i; - size_t nbytes; - u32 src_buffer = 0; - size_t bits_in_src_buffer = 0; - - if (!nbits) - return; - - /* - * Move src and dst pointers to the closest byte pointer and store bit - * offsets within a byte. - */ - src += src_bit_off / 8; - src_bit_off %= 8; - - dst += dst_bit_off / 8; - dst_bit_off %= 8; - - /* - * Initialize the src_buffer value with bits available in the first - * byte of data so that we end up with a byte aligned src pointer. - */ - if (src_bit_off) { - src_buffer = src[0] >> src_bit_off; - if (nbits >= (8 - src_bit_off)) { - bits_in_src_buffer += 8 - src_bit_off; - } else { - src_buffer &= GENMASK(nbits - 1, 0); - bits_in_src_buffer += nbits; - } - nbits -= bits_in_src_buffer; - src++; - } - - /* Calculate the number of bytes that can be copied from src to dst. */ - nbytes = nbits / 8; - - /* Try to align dst to a byte boundary. */ - if (dst_bit_off) { - if (bits_in_src_buffer < (8 - dst_bit_off) && nbytes) { - src_buffer |= src[0] << bits_in_src_buffer; - bits_in_src_buffer += 8; - src++; - nbytes--; - } - - if (bits_in_src_buffer >= (8 - dst_bit_off)) { - dst[0] &= GENMASK(dst_bit_off - 1, 0); - dst[0] |= src_buffer << dst_bit_off; - src_buffer >>= (8 - dst_bit_off); - bits_in_src_buffer -= (8 - dst_bit_off); - dst_bit_off = 0; - dst++; - if (bits_in_src_buffer > 7) { - bits_in_src_buffer -= 8; - dst[0] = src_buffer; - dst++; - src_buffer >>= 8; - } - } - } - - if (!bits_in_src_buffer && !dst_bit_off) { - /* - * Both src and dst pointers are byte aligned, thus we can - * just use the optimized memcpy function. - */ - if (nbytes) - memcpy(dst, src, nbytes); - } else { - /* - * src buffer is not byte aligned, hence we have to copy each - * src byte to the src_buffer variable before extracting a byte - * to store in dst. - */ - for (i = 0; i < nbytes; i++) { - src_buffer |= src[i] << bits_in_src_buffer; - dst[i] = src_buffer; - src_buffer >>= 8; - } - } - /* Update dst and src pointers */ - dst += nbytes; - src += nbytes; - - /* - * nbits is the number of remaining bits. It should not exceed 8 as - * we've already copied as much bytes as possible. - */ - nbits %= 8; - - /* - * If there's no more bits to copy to the destination and src buffer - * was already byte aligned, then we're done. - */ - if (!nbits && !bits_in_src_buffer) - return; - - /* Copy the remaining bits to src_buffer */ - if (nbits) - src_buffer |= (*src & GENMASK(nbits - 1, 0)) << - bits_in_src_buffer; - bits_in_src_buffer += nbits; - - /* - * In case there were not enough bits to get a byte aligned dst buffer - * prepare the src_buffer variable to match the dst organization (shift - * src_buffer by dst_bit_off and retrieve the least significant bits - * from dst). - */ - if (dst_bit_off) - src_buffer = (src_buffer << dst_bit_off) | - (*dst & GENMASK(dst_bit_off - 1, 0)); - bits_in_src_buffer += dst_bit_off; - - /* - * Keep most significant bits from dst if we end up with an unaligned - * number of bits. - */ - nbytes = bits_in_src_buffer / 8; - if (bits_in_src_buffer % 8) { - src_buffer |= (dst[nbytes] & - GENMASK(7, bits_in_src_buffer % 8)) << - (nbytes * 8); - nbytes++; - } - - /* Copy the remaining bytes to dst */ - for (i = 0; i < nbytes; i++) { - dst[i] = src_buffer; - src_buffer >>= 8; - } -} diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 40df20d1adf5..334fe3130285 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -6,6 +6,7 @@ * Copyright (C) 2008 Embedded Alley Solutions, Inc. */ #include <linux/clk.h> +#include <linux/delay.h> #include <linux/slab.h> #include <linux/sched/task_stack.h> #include <linux/interrupt.h> @@ -13,7 +14,10 @@ #include <linux/mtd/partitions.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm_runtime.h> +#include <linux/dma/mxs-dma.h> #include "gpmi-nand.h" +#include "gpmi-regs.h" #include "bch-regs.h" /* Resource names for the GPMI NAND driver. */ @@ -21,149 +25,208 @@ #define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch" #define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch" -/* add our owner bbt descriptor */ -static uint8_t scan_ff_pattern[] = { 0xff }; -static struct nand_bbt_descr gpmi_bbt_descr = { - .options = 0, - .offs = 0, - .len = 1, - .pattern = scan_ff_pattern -}; +/* Converts time to clock cycles */ +#define TO_CYCLES(duration, period) DIV_ROUND_UP_ULL(duration, period) +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 /* - * We may change the layout if we can get the ECC info from the datasheet, - * else we will use all the (page + OOB). + * Clear the bit and poll it cleared. This is usually called with + * a reset address and mask being either SFTRST(bit 31) or CLKGATE + * (bit 30). */ -static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) +static int clear_poll_bit(void __iomem *addr, u32 mask) { - struct nand_chip *chip = mtd_to_nand(mtd); - struct gpmi_nand_data *this = nand_get_controller_data(chip); - struct bch_geometry *geo = &this->bch_geometry; + int timeout = 0x400; - if (section) - return -ERANGE; + /* clear the bit */ + writel(mask, addr + MXS_CLR_ADDR); - oobregion->offset = 0; - oobregion->length = geo->page_size - mtd->writesize; + /* + * SFTRST needs 3 GPMI clocks to settle, the reference manual + * recommends to wait 1us. + */ + udelay(1); - return 0; + /* poll the bit becoming clear */ + while ((readl(addr) & mask) && --timeout) + /* nothing */; + + return !timeout; } -static int gpmi_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) +#define MODULE_CLKGATE (1 << 30) +#define MODULE_SFTRST (1 << 31) +/* + * The current mxs_reset_block() will do two things: + * [1] enable the module. + * [2] reset the module. + * + * In most of the cases, it's ok. + * But in MX23, there is a hardware bug in the BCH block (see erratum #2847). + * If you try to soft reset the BCH block, it becomes unusable until + * the next hard reset. This case occurs in the NAND boot mode. When the board + * boots by NAND, the ROM of the chip will initialize the BCH blocks itself. + * So If the driver tries to reset the BCH again, the BCH will not work anymore. + * You will see a DMA timeout in this case. The bug has been fixed + * in the following chips, such as MX28. + * + * To avoid this bug, just add a new parameter `just_enable` for + * the mxs_reset_block(), and rewrite it here. + */ +static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) { - struct nand_chip *chip = mtd_to_nand(mtd); - struct gpmi_nand_data *this = nand_get_controller_data(chip); - struct bch_geometry *geo = &this->bch_geometry; + int ret; + int timeout = 0x400; + + /* clear and poll SFTRST */ + ret = clear_poll_bit(reset_addr, MODULE_SFTRST); + if (unlikely(ret)) + goto error; + + /* clear CLKGATE */ + writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR); + + if (!just_enable) { + /* set SFTRST to reset the block */ + writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR); + udelay(1); + + /* poll CLKGATE becoming set */ + while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout) + /* nothing */; + if (unlikely(!timeout)) + goto error; + } - if (section) - return -ERANGE; + /* clear and poll SFTRST */ + ret = clear_poll_bit(reset_addr, MODULE_SFTRST); + if (unlikely(ret)) + goto error; - /* The available oob size we have. */ - if (geo->page_size < mtd->writesize + mtd->oobsize) { - oobregion->offset = geo->page_size - mtd->writesize; - oobregion->length = mtd->oobsize - oobregion->offset; - } + /* clear and poll CLKGATE */ + ret = clear_poll_bit(reset_addr, MODULE_CLKGATE); + if (unlikely(ret)) + goto error; return 0; + +error: + pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); + return -ETIMEDOUT; } -static const char * const gpmi_clks_for_mx2x[] = { - "gpmi_io", -}; +static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v) +{ + struct clk *clk; + int ret; + int i; -static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = { - .ecc = gpmi_ooblayout_ecc, - .free = gpmi_ooblayout_free, -}; + for (i = 0; i < GPMI_CLK_MAX; i++) { + clk = this->resources.clock[i]; + if (!clk) + break; -static const struct gpmi_devdata gpmi_devdata_imx23 = { - .type = IS_MX23, - .bch_max_ecc_strength = 20, - .max_chain_delay = 16000, - .clks = gpmi_clks_for_mx2x, - .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), -}; + if (v) { + ret = clk_prepare_enable(clk); + if (ret) + goto err_clk; + } else { + clk_disable_unprepare(clk); + } + } + return 0; -static const struct gpmi_devdata gpmi_devdata_imx28 = { - .type = IS_MX28, - .bch_max_ecc_strength = 20, - .max_chain_delay = 16000, - .clks = gpmi_clks_for_mx2x, - .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), -}; +err_clk: + for (; i > 0; i--) + clk_disable_unprepare(this->resources.clock[i - 1]); + return ret; +} -static const char * const gpmi_clks_for_mx6[] = { - "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", -}; +static int gpmi_init(struct gpmi_nand_data *this) +{ + struct resources *r = &this->resources; + int ret; -static const struct gpmi_devdata gpmi_devdata_imx6q = { - .type = IS_MX6Q, - .bch_max_ecc_strength = 40, - .max_chain_delay = 12000, - .clks = gpmi_clks_for_mx6, - .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), -}; + ret = gpmi_reset_block(r->gpmi_regs, false); + if (ret) + goto err_out; -static const struct gpmi_devdata gpmi_devdata_imx6sx = { - .type = IS_MX6SX, - .bch_max_ecc_strength = 62, - .max_chain_delay = 12000, - .clks = gpmi_clks_for_mx6, - .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), -}; + /* + * Reset BCH here, too. We got failures otherwise :( + * See later BCH reset for explanation of MX23 and MX28 handling + */ + ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this)); + if (ret) + goto err_out; -static const char * const gpmi_clks_for_mx7d[] = { - "gpmi_io", "gpmi_bch_apb", -}; + /* Choose NAND mode. */ + writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR); -static const struct gpmi_devdata gpmi_devdata_imx7d = { - .type = IS_MX7D, - .bch_max_ecc_strength = 62, - .max_chain_delay = 12000, - .clks = gpmi_clks_for_mx7d, - .clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d), -}; + /* Set the IRQ polarity. */ + writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY, + r->gpmi_regs + HW_GPMI_CTRL1_SET); -static irqreturn_t bch_irq(int irq, void *cookie) -{ - struct gpmi_nand_data *this = cookie; + /* Disable Write-Protection. */ + writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET); - gpmi_clear_bch(this); - complete(&this->bch_done); - return IRQ_HANDLED; + /* Select BCH ECC. */ + writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); + + /* + * Decouple the chip select from dma channel. We use dma0 for all + * the chips. + */ + writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET); + + return 0; +err_out: + return ret; } -/* - * Calculate the ECC strength by hand: - * E : The ECC strength. - * G : the length of Galois Field. - * N : The chunk count of per page. - * O : the oobsize of the NAND chip. - * M : the metasize of per page. - * - * The formula is : - * E * G * N - * ------------ <= (O - M) - * 8 - * - * So, we get E by: - * (O - M) * 8 - * E <= ------------- - * G * N - */ -static inline int get_ecc_strength(struct gpmi_nand_data *this) +/* This function is very useful. It is called only when the bug occur. */ +static void gpmi_dump_info(struct gpmi_nand_data *this) { + struct resources *r = &this->resources; struct bch_geometry *geo = &this->bch_geometry; - struct mtd_info *mtd = nand_to_mtd(&this->nand); - int ecc_strength; + u32 reg; + int i; - ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8) - / (geo->gf_len * geo->ecc_chunk_count); + dev_err(this->dev, "Show GPMI registers :\n"); + for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) { + reg = readl(r->gpmi_regs + i * 0x10); + dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); + } - /* We need the minor even number. */ - return round_down(ecc_strength, 2); + /* start to print out the BCH info */ + dev_err(this->dev, "Show BCH registers :\n"); + for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) { + reg = readl(r->bch_regs + i * 0x10); + dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); + } + dev_err(this->dev, "BCH Geometry :\n" + "GF length : %u\n" + "ECC Strength : %u\n" + "Page Size in Bytes : %u\n" + "Metadata Size in Bytes : %u\n" + "ECC Chunk Size in Bytes: %u\n" + "ECC Chunk Count : %u\n" + "Payload Size in Bytes : %u\n" + "Auxiliary Size in Bytes: %u\n" + "Auxiliary Status Offset: %u\n" + "Block Mark Byte Offset : %u\n" + "Block Mark Bit Offset : %u\n", + geo->gf_len, + geo->ecc_strength, + geo->page_size, + geo->metadata_size, + geo->ecc_chunk_size, + geo->ecc_chunk_count, + geo->payload_size, + geo->auxiliary_size, + geo->auxiliary_status_offset, + geo->block_mark_byte_offset, + geo->block_mark_bit_offset); } static inline bool gpmi_check_ecc(struct gpmi_nand_data *this) @@ -296,6 +359,37 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this, return 0; } +/* + * Calculate the ECC strength by hand: + * E : The ECC strength. + * G : the length of Galois Field. + * N : The chunk count of per page. + * O : the oobsize of the NAND chip. + * M : the metasize of per page. + * + * The formula is : + * E * G * N + * ------------ <= (O - M) + * 8 + * + * So, we get E by: + * (O - M) * 8 + * E <= ------------- + * G * N + */ +static inline int get_ecc_strength(struct gpmi_nand_data *this) +{ + struct bch_geometry *geo = &this->bch_geometry; + struct mtd_info *mtd = nand_to_mtd(&this->nand); + int ecc_strength; + + ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8) + / (geo->gf_len * geo->ecc_chunk_count); + + /* We need the minor even number. */ + return round_down(ecc_strength, 2); +} + static int legacy_set_geometry(struct gpmi_nand_data *this) { struct bch_geometry *geo = &this->bch_geometry; @@ -408,7 +502,7 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) return 0; } -int common_nfc_set_geometry(struct gpmi_nand_data *this) +static int common_nfc_set_geometry(struct gpmi_nand_data *this) { struct nand_chip *chip = &this->nand; @@ -430,18 +524,288 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this) return 0; } -struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) +/* Configures the geometry for BCH. */ +static int bch_set_geometry(struct gpmi_nand_data *this) +{ + struct resources *r = &this->resources; + int ret; + + ret = common_nfc_set_geometry(this); + if (ret) + return ret; + + ret = pm_runtime_get_sync(this->dev); + if (ret < 0) + return ret; + + /* + * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this + * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. + * and MX28. + */ + ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this)); + if (ret) + goto err_out; + + /* Set *all* chip selects to use layout 0. */ + writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT); + + ret = 0; +err_out: + pm_runtime_mark_last_busy(this->dev); + pm_runtime_put_autosuspend(this->dev); + + return ret; +} + +/* + * <1> Firstly, we should know what's the GPMI-clock means. + * The GPMI-clock is the internal clock in the gpmi nand controller. + * If you set 100MHz to gpmi nand controller, the GPMI-clock's period + * is 10ns. Mark the GPMI-clock's period as GPMI-clock-period. + * + * <2> Secondly, we should know what's the frequency on the nand chip pins. + * The frequency on the nand chip pins is derived from the GPMI-clock. + * We can get it from the following equation: + * + * F = G / (DS + DH) + * + * F : the frequency on the nand chip pins. + * G : the GPMI clock, such as 100MHz. + * DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP + * DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD + * + * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz, + * the nand EDO(extended Data Out) timing could be applied. + * The GPMI implements a feedback read strobe to sample the read data. + * The feedback read strobe can be delayed to support the nand EDO timing + * where the read strobe may deasserts before the read data is valid, and + * read data is valid for some time after read strobe. + * + * The following figure illustrates some aspects of a NAND Flash read: + * + * |<---tREA---->| + * | | + * | | | + * |<--tRP-->| | + * | | | + * __ ___|__________________________________ + * RDN \________/ | + * | + * /---------\ + * Read Data --------------< >--------- + * \---------/ + * | | + * |<-D->| + * FeedbackRDN ________ ____________ + * \___________/ + * + * D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY. + * + * + * <4> Now, we begin to describe how to compute the right RDN_DELAY. + * + * 4.1) From the aspect of the nand chip pins: + * Delay = (tREA + C - tRP) {1} + * + * tREA : the maximum read access time. + * C : a constant to adjust the delay. default is 4000ps. + * tRP : the read pulse width, which is exactly: + * tRP = (GPMI-clock-period) * DATA_SETUP + * + * 4.2) From the aspect of the GPMI nand controller: + * Delay = RDN_DELAY * 0.125 * RP {2} + * + * RP : the DLL reference period. + * if (GPMI-clock-period > DLL_THRETHOLD) + * RP = GPMI-clock-period / 2; + * else + * RP = GPMI-clock-period; + * + * Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period + * is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD + * is 16000ps, but in mx6q, we use 12000ps. + * + * 4.3) since {1} equals {2}, we get: + * + * (tREA + 4000 - tRP) * 8 + * RDN_DELAY = ----------------------- {3} + * RP + */ +static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this, + const struct nand_sdr_timings *sdr) +{ + struct gpmi_nfc_hardware_timing *hw = &this->hw; + unsigned int dll_threshold_ps = this->devdata->max_chain_delay; + unsigned int period_ps, reference_period_ps; + unsigned int data_setup_cycles, data_hold_cycles, addr_setup_cycles; + unsigned int tRP_ps; + bool use_half_period; + int sample_delay_ps, sample_delay_factor; + u16 busy_timeout_cycles; + u8 wrn_dly_sel; + + if (sdr->tRC_min >= 30000) { + /* ONFI non-EDO modes [0-3] */ + hw->clk_rate = 22000000; + wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS; + } else if (sdr->tRC_min >= 25000) { + /* ONFI EDO mode 4 */ + hw->clk_rate = 80000000; + wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; + } else { + /* ONFI EDO mode 5 */ + hw->clk_rate = 100000000; + wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; + } + + /* SDR core timings are given in picoseconds */ + period_ps = div_u64((u64)NSEC_PER_SEC * 1000, hw->clk_rate); + + addr_setup_cycles = TO_CYCLES(sdr->tALS_min, period_ps); + data_setup_cycles = TO_CYCLES(sdr->tDS_min, period_ps); + data_hold_cycles = TO_CYCLES(sdr->tDH_min, period_ps); + busy_timeout_cycles = TO_CYCLES(sdr->tWB_max + sdr->tR_max, period_ps); + + hw->timing0 = BF_GPMI_TIMING0_ADDRESS_SETUP(addr_setup_cycles) | + BF_GPMI_TIMING0_DATA_HOLD(data_hold_cycles) | + BF_GPMI_TIMING0_DATA_SETUP(data_setup_cycles); + hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(busy_timeout_cycles * 4096); + + /* + * Derive NFC ideal delay from {3}: + * + * (tREA + 4000 - tRP) * 8 + * RDN_DELAY = ----------------------- + * RP + */ + if (period_ps > dll_threshold_ps) { + use_half_period = true; + reference_period_ps = period_ps / 2; + } else { + use_half_period = false; + reference_period_ps = period_ps; + } + + tRP_ps = data_setup_cycles * period_ps; + sample_delay_ps = (sdr->tREA_max + 4000 - tRP_ps) * 8; + if (sample_delay_ps > 0) + sample_delay_factor = sample_delay_ps / reference_period_ps; + else + sample_delay_factor = 0; + + hw->ctrl1n = BF_GPMI_CTRL1_WRN_DLY_SEL(wrn_dly_sel); + if (sample_delay_factor) + hw->ctrl1n |= BF_GPMI_CTRL1_RDN_DELAY(sample_delay_factor) | + BM_GPMI_CTRL1_DLL_ENABLE | + (use_half_period ? BM_GPMI_CTRL1_HALF_PERIOD : 0); +} + +static void gpmi_nfc_apply_timings(struct gpmi_nand_data *this) +{ + struct gpmi_nfc_hardware_timing *hw = &this->hw; + struct resources *r = &this->resources; + void __iomem *gpmi_regs = r->gpmi_regs; + unsigned int dll_wait_time_us; + + clk_set_rate(r->clock[0], hw->clk_rate); + + writel(hw->timing0, gpmi_regs + HW_GPMI_TIMING0); + writel(hw->timing1, gpmi_regs + HW_GPMI_TIMING1); + + /* + * Clear several CTRL1 fields, DLL must be disabled when setting + * RDN_DELAY or HALF_PERIOD. + */ + writel(BM_GPMI_CTRL1_CLEAR_MASK, gpmi_regs + HW_GPMI_CTRL1_CLR); + writel(hw->ctrl1n, gpmi_regs + HW_GPMI_CTRL1_SET); + + /* Wait 64 clock cycles before using the GPMI after enabling the DLL */ + dll_wait_time_us = USEC_PER_SEC / hw->clk_rate * 64; + if (!dll_wait_time_us) + dll_wait_time_us = 1; + + /* Wait for the DLL to settle. */ + udelay(dll_wait_time_us); +} + +static int gpmi_setup_data_interface(struct nand_chip *chip, int chipnr, + const struct nand_data_interface *conf) +{ + struct gpmi_nand_data *this = nand_get_controller_data(chip); + const struct nand_sdr_timings *sdr; + + /* Retrieve required NAND timings */ + sdr = nand_get_sdr_timings(conf); + if (IS_ERR(sdr)) + return PTR_ERR(sdr); + + /* Only MX6 GPMI controller can reach EDO timings */ + if (sdr->tRC_min <= 25000 && !GPMI_IS_MX6(this)) + return -ENOTSUPP; + + /* Stop here if this call was just a check */ + if (chipnr < 0) + return 0; + + /* Do the actual derivation of the controller timings */ + gpmi_nfc_compute_timings(this, sdr); + + this->hw.must_apply_timings = true; + + return 0; +} + +/* Clears a BCH interrupt. */ +static void gpmi_clear_bch(struct gpmi_nand_data *this) +{ + struct resources *r = &this->resources; + writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR); +} + +static struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) { /* We use the DMA channel 0 to access all the nand chips. */ return this->dma_chans[0]; } +/* This will be called after the DMA operation is finished. */ +static void dma_irq_callback(void *param) +{ + struct gpmi_nand_data *this = param; + struct completion *dma_c = &this->dma_done; + + complete(dma_c); +} + +static irqreturn_t bch_irq(int irq, void *cookie) +{ + struct gpmi_nand_data *this = cookie; + + gpmi_clear_bch(this); + complete(&this->bch_done); + return IRQ_HANDLED; +} + +static int gpmi_raw_len_to_len(struct gpmi_nand_data *this, int raw_len) +{ + /* + * raw_len is the length to read/write including bch data which + * we are passed in exec_op. Calculate the data length from it. + */ + if (this->bch) + return ALIGN_DOWN(raw_len, this->bch_geometry.ecc_chunk_size); + else + return raw_len; +} + /* Can we use the upper's buffer directly for DMA? */ -bool prepare_data_dma(struct gpmi_nand_data *this, const void *buf, int len, - enum dma_data_direction dr) +static bool prepare_data_dma(struct gpmi_nand_data *this, const void *buf, + int raw_len, struct scatterlist *sgl, + enum dma_data_direction dr) { - struct scatterlist *sgl = &this->data_sgl; int ret; + int len = gpmi_raw_len_to_len(this, raw_len); /* first try to map the upper buffer directly */ if (virt_addr_valid(buf) && !object_is_on_stack(buf)) { @@ -457,7 +821,7 @@ map_fail: /* We have to use our own DMA buffer. */ sg_init_one(sgl, this->data_buffer_dma, len); - if (dr == DMA_TO_DEVICE) + if (dr == DMA_TO_DEVICE && buf != this->data_buffer_dma) memcpy(this->data_buffer_dma, buf, len); dma_map_sg(this->dev, sgl, 1, dr); @@ -465,67 +829,263 @@ map_fail: return false; } -/* This will be called after the DMA operation is finished. */ -static void dma_irq_callback(void *param) +/** + * gpmi_copy_bits - copy bits from one memory region to another + * @dst: destination buffer + * @dst_bit_off: bit offset we're starting to write at + * @src: source buffer + * @src_bit_off: bit offset we're starting to read from + * @nbits: number of bits to copy + * + * This functions copies bits from one memory region to another, and is used by + * the GPMI driver to copy ECC sections which are not guaranteed to be byte + * aligned. + * + * src and dst should not overlap. + * + */ +static void gpmi_copy_bits(u8 *dst, size_t dst_bit_off, const u8 *src, + size_t src_bit_off, size_t nbits) { - struct gpmi_nand_data *this = param; - struct completion *dma_c = &this->dma_done; + size_t i; + size_t nbytes; + u32 src_buffer = 0; + size_t bits_in_src_buffer = 0; - complete(dma_c); -} + if (!nbits) + return; -int start_dma_without_bch_irq(struct gpmi_nand_data *this, - struct dma_async_tx_descriptor *desc) -{ - struct completion *dma_c = &this->dma_done; - unsigned long timeout; + /* + * Move src and dst pointers to the closest byte pointer and store bit + * offsets within a byte. + */ + src += src_bit_off / 8; + src_bit_off %= 8; - init_completion(dma_c); + dst += dst_bit_off / 8; + dst_bit_off %= 8; - desc->callback = dma_irq_callback; - desc->callback_param = this; - dmaengine_submit(desc); - dma_async_issue_pending(get_dma_chan(this)); + /* + * Initialize the src_buffer value with bits available in the first + * byte of data so that we end up with a byte aligned src pointer. + */ + if (src_bit_off) { + src_buffer = src[0] >> src_bit_off; + if (nbits >= (8 - src_bit_off)) { + bits_in_src_buffer += 8 - src_bit_off; + } else { + src_buffer &= GENMASK(nbits - 1, 0); + bits_in_src_buffer += nbits; + } + nbits -= bits_in_src_buffer; + src++; + } - /* Wait for the interrupt from the DMA block. */ - timeout = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); - if (!timeout) { - dev_err(this->dev, "DMA timeout, last DMA\n"); - gpmi_dump_info(this); - return -ETIMEDOUT; + /* Calculate the number of bytes that can be copied from src to dst. */ + nbytes = nbits / 8; + + /* Try to align dst to a byte boundary. */ + if (dst_bit_off) { + if (bits_in_src_buffer < (8 - dst_bit_off) && nbytes) { + src_buffer |= src[0] << bits_in_src_buffer; + bits_in_src_buffer += 8; + src++; + nbytes--; + } + + if (bits_in_src_buffer >= (8 - dst_bit_off)) { + dst[0] &= GENMASK(dst_bit_off - 1, 0); + dst[0] |= src_buffer << dst_bit_off; + src_buffer >>= (8 - dst_bit_off); + bits_in_src_buffer -= (8 - dst_bit_off); + dst_bit_off = 0; + dst++; + if (bits_in_src_buffer > 7) { + bits_in_src_buffer -= 8; + dst[0] = src_buffer; + dst++; + src_buffer >>= 8; + } + } + } + + if (!bits_in_src_buffer && !dst_bit_off) { + /* + * Both src and dst pointers are byte aligned, thus we can + * just use the optimized memcpy function. + */ + if (nbytes) + memcpy(dst, src, nbytes); + } else { + /* + * src buffer is not byte aligned, hence we have to copy each + * src byte to the src_buffer variable before extracting a byte + * to store in dst. + */ + for (i = 0; i < nbytes; i++) { + src_buffer |= src[i] << bits_in_src_buffer; + dst[i] = src_buffer; + src_buffer >>= 8; + } + } + /* Update dst and src pointers */ + dst += nbytes; + src += nbytes; + + /* + * nbits is the number of remaining bits. It should not exceed 8 as + * we've already copied as much bytes as possible. + */ + nbits %= 8; + + /* + * If there's no more bits to copy to the destination and src buffer + * was already byte aligned, then we're done. + */ + if (!nbits && !bits_in_src_buffer) + return; + + /* Copy the remaining bits to src_buffer */ + if (nbits) + src_buffer |= (*src & GENMASK(nbits - 1, 0)) << + bits_in_src_buffer; + bits_in_src_buffer += nbits; + + /* + * In case there were not enough bits to get a byte aligned dst buffer + * prepare the src_buffer variable to match the dst organization (shift + * src_buffer by dst_bit_off and retrieve the least significant bits + * from dst). + */ + if (dst_bit_off) + src_buffer = (src_buffer << dst_bit_off) | + (*dst & GENMASK(dst_bit_off - 1, 0)); + bits_in_src_buffer += dst_bit_off; + + /* + * Keep most significant bits from dst if we end up with an unaligned + * number of bits. + */ + nbytes = bits_in_src_buffer / 8; + if (bits_in_src_buffer % 8) { + src_buffer |= (dst[nbytes] & + GENMASK(7, bits_in_src_buffer % 8)) << + (nbytes * 8); + nbytes++; + } + + /* Copy the remaining bytes to dst */ + for (i = 0; i < nbytes; i++) { + dst[i] = src_buffer; + src_buffer >>= 8; } - return 0; } +/* add our owner bbt descriptor */ +static uint8_t scan_ff_pattern[] = { 0xff }; +static struct nand_bbt_descr gpmi_bbt_descr = { + .options = 0, + .offs = 0, + .len = 1, + .pattern = scan_ff_pattern +}; + /* - * This function is used in BCH reading or BCH writing pages. - * It will wait for the BCH interrupt as long as ONE second. - * Actually, we must wait for two interrupts : - * [1] firstly the DMA interrupt and - * [2] secondly the BCH interrupt. + * We may change the layout if we can get the ECC info from the datasheet, + * else we will use all the (page + OOB). */ -int start_dma_with_bch_irq(struct gpmi_nand_data *this, - struct dma_async_tx_descriptor *desc) +static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) { - struct completion *bch_c = &this->bch_done; - unsigned long timeout; + struct nand_chip *chip = mtd_to_nand(mtd); + struct gpmi_nand_data *this = nand_get_controller_data(chip); + struct bch_geometry *geo = &this->bch_geometry; - /* Prepare to receive an interrupt from the BCH block. */ - init_completion(bch_c); + if (section) + return -ERANGE; - /* start the DMA */ - start_dma_without_bch_irq(this, desc); + oobregion->offset = 0; + oobregion->length = geo->page_size - mtd->writesize; - /* Wait for the interrupt from the BCH block. */ - timeout = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000)); - if (!timeout) { - dev_err(this->dev, "BCH timeout\n"); - gpmi_dump_info(this); - return -ETIMEDOUT; + return 0; +} + +static int gpmi_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct gpmi_nand_data *this = nand_get_controller_data(chip); + struct bch_geometry *geo = &this->bch_geometry; + + if (section) + return -ERANGE; + + /* The available oob size we have. */ + if (geo->page_size < mtd->writesize + mtd->oobsize) { + oobregion->offset = geo->page_size - mtd->writesize; + oobregion->length = mtd->oobsize - oobregion->offset; } + return 0; } +static const char * const gpmi_clks_for_mx2x[] = { + "gpmi_io", +}; + +static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = { + .ecc = gpmi_ooblayout_ecc, + .free = gpmi_ooblayout_free, +}; + +static const struct gpmi_devdata gpmi_devdata_imx23 = { + .type = IS_MX23, + .bch_max_ecc_strength = 20, + .max_chain_delay = 16000, + .clks = gpmi_clks_for_mx2x, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), +}; + +static const struct gpmi_devdata gpmi_devdata_imx28 = { + .type = IS_MX28, + .bch_max_ecc_strength = 20, + .max_chain_delay = 16000, + .clks = gpmi_clks_for_mx2x, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), +}; + +static const char * const gpmi_clks_for_mx6[] = { + "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", +}; + +static const struct gpmi_devdata gpmi_devdata_imx6q = { + .type = IS_MX6Q, + .bch_max_ecc_strength = 40, + .max_chain_delay = 12000, + .clks = gpmi_clks_for_mx6, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), +}; + +static const struct gpmi_devdata gpmi_devdata_imx6sx = { + .type = IS_MX6SX, + .bch_max_ecc_strength = 62, + .max_chain_delay = 12000, + .clks = gpmi_clks_for_mx6, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), +}; + +static const char * const gpmi_clks_for_mx7d[] = { + "gpmi_io", "gpmi_bch_apb", +}; + +static const struct gpmi_devdata gpmi_devdata_imx7d = { + .type = IS_MX7D, + .bch_max_ecc_strength = 62, + .max_chain_delay = 12000, + .clks = gpmi_clks_for_mx7d, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d), +}; + static int acquire_register_block(struct gpmi_nand_data *this, const char *res_name) { @@ -667,68 +1227,20 @@ static void release_resources(struct gpmi_nand_data *this) release_dma_channels(this); } -static int send_page_prepare(struct gpmi_nand_data *this, - const void *source, unsigned length, - void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, - const void **use_virt, dma_addr_t *use_phys) -{ - struct device *dev = this->dev; - - if (virt_addr_valid(source)) { - dma_addr_t source_phys; - - source_phys = dma_map_single(dev, (void *)source, length, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, source_phys)) { - if (alt_size < length) { - dev_err(dev, "Alternate buffer is too small\n"); - return -ENOMEM; - } - goto map_failed; - } - *use_virt = source; - *use_phys = source_phys; - return 0; - } -map_failed: - /* - * Copy the content of the source buffer into the alternate - * buffer and set up the return values accordingly. - */ - memcpy(alt_virt, source, length); - - *use_virt = alt_virt; - *use_phys = alt_phys; - return 0; -} - -static void send_page_end(struct gpmi_nand_data *this, - const void *source, unsigned length, - void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, - const void *used_virt, dma_addr_t used_phys) -{ - struct device *dev = this->dev; - if (used_virt == source) - dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE); -} - static void gpmi_free_dma_buffer(struct gpmi_nand_data *this) { struct device *dev = this->dev; + struct bch_geometry *geo = &this->bch_geometry; - if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt)) - dma_free_coherent(dev, this->page_buffer_size, - this->page_buffer_virt, - this->page_buffer_phys); - kfree(this->cmd_buffer); + if (this->auxiliary_virt && virt_addr_valid(this->auxiliary_virt)) + dma_free_coherent(dev, geo->auxiliary_size, + this->auxiliary_virt, + this->auxiliary_phys); kfree(this->data_buffer_dma); kfree(this->raw_buffer); - this->cmd_buffer = NULL; this->data_buffer_dma = NULL; this->raw_buffer = NULL; - this->page_buffer_virt = NULL; - this->page_buffer_size = 0; } /* Allocate the DMA buffers */ @@ -738,11 +1250,6 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) struct device *dev = this->dev; struct mtd_info *mtd = nand_to_mtd(&this->nand); - /* [1] Allocate a command buffer. PAGE_SIZE is enough. */ - this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); - if (this->cmd_buffer == NULL) - goto error_alloc; - /* * [2] Allocate a read/write data buffer. * The gpmi_alloc_dma_buffer can be called twice. @@ -756,29 +1263,15 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) if (this->data_buffer_dma == NULL) goto error_alloc; - /* - * [3] Allocate the page buffer. - * - * Both the payload buffer and the auxiliary buffer must appear on - * 32-bit boundaries. We presume the size of the payload buffer is a - * power of two and is much larger than four, which guarantees the - * auxiliary buffer will appear on a 32-bit boundary. - */ - this->page_buffer_size = geo->payload_size + geo->auxiliary_size; - this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size, - &this->page_buffer_phys, GFP_DMA); - if (!this->page_buffer_virt) + this->auxiliary_virt = dma_alloc_coherent(dev, geo->auxiliary_size, + &this->auxiliary_phys, GFP_DMA); + if (!this->auxiliary_virt) goto error_alloc; - this->raw_buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); + this->raw_buffer = kzalloc((mtd->writesize ?: PAGE_SIZE) + mtd->oobsize, GFP_KERNEL); if (!this->raw_buffer) goto error_alloc; - /* Slice up the page buffer. */ - this->payload_virt = this->page_buffer_virt; - this->payload_phys = this->page_buffer_phys; - this->auxiliary_virt = this->payload_virt + geo->payload_size; - this->auxiliary_phys = this->payload_phys + geo->payload_size; return 0; error_alloc: @@ -786,106 +1279,6 @@ error_alloc: return -ENOMEM; } -static void gpmi_cmd_ctrl(struct nand_chip *chip, int data, unsigned int ctrl) -{ - struct gpmi_nand_data *this = nand_get_controller_data(chip); - int ret; - - /* - * Every operation begins with a command byte and a series of zero or - * more address bytes. These are distinguished by either the Address - * Latch Enable (ALE) or Command Latch Enable (CLE) signals being - * asserted. When MTD is ready to execute the command, it will deassert - * both latch enables. - * - * Rather than run a separate DMA operation for every single byte, we - * queue them up and run a single DMA operation for the entire series - * of command and data bytes. NAND_CMD_NONE means the END of the queue. - */ - if ((ctrl & (NAND_ALE | NAND_CLE))) { - if (data != NAND_CMD_NONE) - this->cmd_buffer[this->command_length++] = data; - return; - } - - if (!this->command_length) - return; - - ret = gpmi_send_command(this); - if (ret) - dev_err(this->dev, "Chip: %u, Error %d\n", - this->current_chip, ret); - - this->command_length = 0; -} - -static int gpmi_dev_ready(struct nand_chip *chip) -{ - struct gpmi_nand_data *this = nand_get_controller_data(chip); - - return gpmi_is_ready(this, this->current_chip); -} - -static void gpmi_select_chip(struct nand_chip *chip, int chipnr) -{ - struct gpmi_nand_data *this = nand_get_controller_data(chip); - int ret; - - /* - * For power consumption matters, disable/enable the clock each time a - * die is selected/unselected. - */ - if (this->current_chip < 0 && chipnr >= 0) { - ret = gpmi_enable_clk(this); - if (ret) - dev_err(this->dev, "Failed to enable the clock\n"); - } else if (this->current_chip >= 0 && chipnr < 0) { - ret = gpmi_disable_clk(this); - if (ret) - dev_err(this->dev, "Failed to disable the clock\n"); - } - - /* - * This driver currently supports only one NAND chip. Plus, dies share - * the same configuration. So once timings have been applied on the - * controller side, they will not change anymore. When the time will - * come, the check on must_apply_timings will have to be dropped. - */ - if (chipnr >= 0 && this->hw.must_apply_timings) { - this->hw.must_apply_timings = false; - gpmi_nfc_apply_timings(this); - } - - this->current_chip = chipnr; -} - -static void gpmi_read_buf(struct nand_chip *chip, uint8_t *buf, int len) -{ - struct gpmi_nand_data *this = nand_get_controller_data(chip); - - dev_dbg(this->dev, "len is %d\n", len); - - gpmi_read_data(this, buf, len); -} - -static void gpmi_write_buf(struct nand_chip *chip, const uint8_t *buf, int len) -{ - struct gpmi_nand_data *this = nand_get_controller_data(chip); - - dev_dbg(this->dev, "len is %d\n", len); - - gpmi_send_data(this, buf, len); -} - -static uint8_t gpmi_read_byte(struct nand_chip *chip) -{ - struct gpmi_nand_data *this = nand_get_controller_data(chip); - uint8_t *buf = this->data_buffer_dma; - - gpmi_read_buf(chip, buf, 1); - return buf[0]; -} - /* * Handles block mark swapping. * It can be called in swapping the block mark, or swapping it back, @@ -934,54 +1327,20 @@ static void block_mark_swapping(struct gpmi_nand_data *this, p[1] = (p[1] & mask) | (from_oob >> (8 - bit)); } -static int gpmi_ecc_read_page_data(struct nand_chip *chip, - uint8_t *buf, int oob_required, - int page) +static int gpmi_count_bitflips(struct nand_chip *chip, void *buf, int first, + int last, int meta) { struct gpmi_nand_data *this = nand_get_controller_data(chip); struct bch_geometry *nfc_geo = &this->bch_geometry; struct mtd_info *mtd = nand_to_mtd(chip); - dma_addr_t payload_phys; - unsigned int i; + int i; unsigned char *status; - unsigned int max_bitflips = 0; - int ret; - bool direct = false; - - dev_dbg(this->dev, "page number is : %d\n", page); - - payload_phys = this->payload_phys; - - if (virt_addr_valid(buf)) { - dma_addr_t dest_phys; - - dest_phys = dma_map_single(this->dev, buf, nfc_geo->payload_size, - DMA_FROM_DEVICE); - if (!dma_mapping_error(this->dev, dest_phys)) { - payload_phys = dest_phys; - direct = true; - } - } - - /* go! */ - ret = gpmi_read_page(this, payload_phys, this->auxiliary_phys); - - if (direct) - dma_unmap_single(this->dev, payload_phys, nfc_geo->payload_size, - DMA_FROM_DEVICE); - - if (ret) { - dev_err(this->dev, "Error in ECC-based read: %d\n", ret); - return ret; - } + unsigned int max_bitflips = 0; /* Loop over status bytes, accumulating ECC status. */ - status = this->auxiliary_virt + nfc_geo->auxiliary_status_offset; - - if (!direct) - memcpy(buf, this->payload_virt, nfc_geo->payload_size); + status = this->auxiliary_virt + ALIGN(meta, 4); - for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) { + for (i = first; i < last; i++, status++) { if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED)) continue; @@ -1061,6 +1420,50 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip, max_bitflips = max_t(unsigned int, max_bitflips, *status); } + return max_bitflips; +} + +static void gpmi_bch_layout_std(struct gpmi_nand_data *this) +{ + struct bch_geometry *geo = &this->bch_geometry; + unsigned int ecc_strength = geo->ecc_strength >> 1; + unsigned int gf_len = geo->gf_len; + unsigned int block_size = geo->ecc_chunk_size; + + this->bch_flashlayout0 = + BF_BCH_FLASH0LAYOUT0_NBLOCKS(geo->ecc_chunk_count - 1) | + BF_BCH_FLASH0LAYOUT0_META_SIZE(geo->metadata_size) | + BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) | + BF_BCH_FLASH0LAYOUT0_GF(gf_len, this) | + BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this); + + this->bch_flashlayout1 = + BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(geo->page_size) | + BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) | + BF_BCH_FLASH0LAYOUT1_GF(gf_len, this) | + BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this); +} + +static int gpmi_ecc_read_page(struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +{ + struct gpmi_nand_data *this = nand_get_controller_data(chip); + struct mtd_info *mtd = nand_to_mtd(chip); + struct bch_geometry *geo = &this->bch_geometry; + unsigned int max_bitflips; + int ret; + + gpmi_bch_layout_std(this); + this->bch = true; + + ret = nand_read_page_op(chip, page, 0, buf, geo->page_size); + if (ret) + return ret; + + max_bitflips = gpmi_count_bitflips(chip, buf, 0, + geo->ecc_chunk_count, + geo->auxiliary_status_offset); + /* handle the block mark swapping */ block_mark_swapping(this, buf, this->auxiliary_virt); @@ -1082,30 +1485,20 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip, return max_bitflips; } -static int gpmi_ecc_read_page(struct nand_chip *chip, uint8_t *buf, - int oob_required, int page) -{ - nand_read_page_op(chip, page, 0, NULL, 0); - - return gpmi_ecc_read_page_data(chip, buf, oob_required, page); -} - /* Fake a virtual small page for the subpage read */ static int gpmi_ecc_read_subpage(struct nand_chip *chip, uint32_t offs, uint32_t len, uint8_t *buf, int page) { struct gpmi_nand_data *this = nand_get_controller_data(chip); - void __iomem *bch_regs = this->resources.bch_regs; - struct bch_geometry old_geo = this->bch_geometry; struct bch_geometry *geo = &this->bch_geometry; int size = chip->ecc.size; /* ECC chunk size */ int meta, n, page_size; - u32 r1_old, r2_old, r1_new, r2_new; unsigned int max_bitflips; + unsigned int ecc_strength; int first, last, marker_pos; int ecc_parity_size; int col = 0; - int old_swap_block_mark = this->swap_block_mark; + int ret; /* The size of ECC parity */ ecc_parity_size = geo->gf_len * geo->ecc_strength / 8; @@ -1138,43 +1531,33 @@ static int gpmi_ecc_read_subpage(struct nand_chip *chip, uint32_t offs, buf = buf + first * size; } - nand_read_page_op(chip, page, col, NULL, 0); - - /* Save the old environment */ - r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0); - r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1); + ecc_parity_size = geo->gf_len * geo->ecc_strength / 8; - /* change the BCH registers and bch_geometry{} */ n = last - first + 1; page_size = meta + (size + ecc_parity_size) * n; + ecc_strength = geo->ecc_strength >> 1; - r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS | - BM_BCH_FLASH0LAYOUT0_META_SIZE); - r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1) - | BF_BCH_FLASH0LAYOUT0_META_SIZE(meta); - writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0); + this->bch_flashlayout0 = BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1) | + BF_BCH_FLASH0LAYOUT0_META_SIZE(meta) | + BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) | + BF_BCH_FLASH0LAYOUT0_GF(geo->gf_len, this) | + BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(geo->ecc_chunk_size, this); - r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE; - r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size); - writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1); + this->bch_flashlayout1 = BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size) | + BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) | + BF_BCH_FLASH0LAYOUT1_GF(geo->gf_len, this) | + BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(geo->ecc_chunk_size, this); - geo->ecc_chunk_count = n; - geo->payload_size = n * size; - geo->page_size = page_size; - geo->auxiliary_status_offset = ALIGN(meta, 4); + this->bch = true; + + ret = nand_read_page_op(chip, page, col, buf, page_size); + if (ret) + return ret; dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n", page, offs, len, col, first, n, page_size); - /* Read the subpage now */ - this->swap_block_mark = false; - max_bitflips = gpmi_ecc_read_page_data(chip, buf, 0, page); - - /* Restore */ - writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0); - writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1); - this->bch_geometry = old_geo; - this->swap_block_mark = old_swap_block_mark; + max_bitflips = gpmi_count_bitflips(chip, buf, first, last, meta); return max_bitflips; } @@ -1185,81 +1568,29 @@ static int gpmi_ecc_write_page(struct nand_chip *chip, const uint8_t *buf, struct mtd_info *mtd = nand_to_mtd(chip); struct gpmi_nand_data *this = nand_get_controller_data(chip); struct bch_geometry *nfc_geo = &this->bch_geometry; - const void *payload_virt; - dma_addr_t payload_phys; - const void *auxiliary_virt; - dma_addr_t auxiliary_phys; - int ret; + int ret; dev_dbg(this->dev, "ecc write page.\n"); - nand_prog_page_begin_op(chip, page, 0, NULL, 0); + gpmi_bch_layout_std(this); + this->bch = true; + + memcpy(this->auxiliary_virt, chip->oob_poi, nfc_geo->auxiliary_size); if (this->swap_block_mark) { /* - * If control arrives here, we're doing block mark swapping. - * Since we can't modify the caller's buffers, we must copy them - * into our own. - */ - memcpy(this->payload_virt, buf, mtd->writesize); - payload_virt = this->payload_virt; - payload_phys = this->payload_phys; - - memcpy(this->auxiliary_virt, chip->oob_poi, - nfc_geo->auxiliary_size); - auxiliary_virt = this->auxiliary_virt; - auxiliary_phys = this->auxiliary_phys; - - /* Handle block mark swapping. */ - block_mark_swapping(this, - (void *)payload_virt, (void *)auxiliary_virt); - } else { - /* - * If control arrives here, we're not doing block mark swapping, - * so we can to try and use the caller's buffers. + * When doing bad block marker swapping we must always copy the + * input buffer as we can't modify the const buffer. */ - ret = send_page_prepare(this, - buf, mtd->writesize, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - &payload_virt, &payload_phys); - if (ret) { - dev_err(this->dev, "Inadequate payload DMA buffer\n"); - return 0; - } - - ret = send_page_prepare(this, - chip->oob_poi, mtd->oobsize, - this->auxiliary_virt, this->auxiliary_phys, - nfc_geo->auxiliary_size, - &auxiliary_virt, &auxiliary_phys); - if (ret) { - dev_err(this->dev, "Inadequate auxiliary DMA buffer\n"); - goto exit_auxiliary; - } + memcpy(this->data_buffer_dma, buf, mtd->writesize); + buf = this->data_buffer_dma; + block_mark_swapping(this, this->data_buffer_dma, + this->auxiliary_virt); } - /* Ask the NFC. */ - ret = gpmi_send_page(this, payload_phys, auxiliary_phys); - if (ret) - dev_err(this->dev, "Error in ECC-based write: %d\n", ret); - - if (!this->swap_block_mark) { - send_page_end(this, chip->oob_poi, mtd->oobsize, - this->auxiliary_virt, this->auxiliary_phys, - nfc_geo->auxiliary_size, - auxiliary_virt, auxiliary_phys); -exit_auxiliary: - send_page_end(this, buf, mtd->writesize, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); - } + ret = nand_prog_page_op(chip, page, 0, buf, nfc_geo->page_size); - if (ret) - return ret; - - return nand_prog_page_end_op(chip); + return ret; } /* @@ -1326,14 +1657,16 @@ static int gpmi_ecc_read_oob(struct nand_chip *chip, int page) { struct mtd_info *mtd = nand_to_mtd(chip); struct gpmi_nand_data *this = nand_get_controller_data(chip); + int ret; - dev_dbg(this->dev, "page number is %d\n", page); /* clear the OOB buffer */ memset(chip->oob_poi, ~0, mtd->oobsize); /* Read out the conventional OOB. */ - nand_read_page_op(chip, page, mtd->writesize, NULL, 0); - chip->legacy.read_buf(chip, chip->oob_poi, mtd->oobsize); + ret = nand_read_page_op(chip, page, mtd->writesize, chip->oob_poi, + mtd->oobsize); + if (ret) + return ret; /* * Now, we want to make sure the block mark is correct. In the @@ -1342,8 +1675,9 @@ static int gpmi_ecc_read_oob(struct nand_chip *chip, int page) */ if (GPMI_IS_MX23(this)) { /* Read the block mark into the first byte of the OOB buffer. */ - nand_read_page_op(chip, page, 0, NULL, 0); - chip->oob_poi[0] = chip->legacy.read_byte(chip); + ret = nand_read_page_op(chip, page, 0, chip->oob_poi, 1); + if (ret) + return ret; } return 0; @@ -1392,9 +1726,12 @@ static int gpmi_ecc_read_page_raw(struct nand_chip *chip, uint8_t *buf, size_t oob_byte_off; uint8_t *oob = chip->oob_poi; int step; + int ret; - nand_read_page_op(chip, page, 0, tmp_buf, - mtd->writesize + mtd->oobsize); + ret = nand_read_page_op(chip, page, 0, tmp_buf, + mtd->writesize + mtd->oobsize); + if (ret) + return ret; /* * If required, swap the bad block marker and the data stored in the @@ -1606,13 +1943,12 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) unsigned int stride; unsigned int page; u8 *buffer = nand_get_data_buf(chip); - int saved_chip_number; int found_an_ncb_fingerprint = false; + int ret; /* Compute the number of strides in a search area. */ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent; - saved_chip_number = this->current_chip; nand_select_target(chip, 0); /* @@ -1630,8 +1966,10 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) * Read the NCB fingerprint. The fingerprint is four bytes long * and starts in the 12th byte of the page. */ - nand_read_page_op(chip, page, 12, NULL, 0); - chip->legacy.read_buf(chip, buffer, strlen(fingerprint)); + ret = nand_read_page_op(chip, page, 12, buffer, + strlen(fingerprint)); + if (ret) + continue; /* Look for the fingerprint. */ if (!memcmp(buffer, fingerprint, strlen(fingerprint))) { @@ -1641,10 +1979,7 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) } - if (saved_chip_number >= 0) - nand_select_target(chip, saved_chip_number); - else - nand_deselect_target(chip); + nand_deselect_target(chip); if (found_an_ncb_fingerprint) dev_dbg(dev, "\tFound a fingerprint\n"); @@ -1668,7 +2003,6 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) unsigned int stride; unsigned int page; u8 *buffer = nand_get_data_buf(chip); - int saved_chip_number; int status; /* Compute the search area geometry. */ @@ -1685,8 +2019,6 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides); dev_dbg(dev, "\tin Pages : %u\n", search_area_size_in_pages); - /* Select chip 0. */ - saved_chip_number = this->current_chip; nand_select_target(chip, 0); /* Loop over blocks in the first search area, erasing them. */ @@ -1718,11 +2050,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) dev_err(dev, "[%s] Write failed.\n", __func__); } - /* Deselect chip 0. */ - if (saved_chip_number >= 0) - nand_select_target(chip, saved_chip_number); - else - nand_deselect_target(chip); + nand_deselect_target(chip); return 0; } @@ -1773,10 +2101,13 @@ static int mx23_boot_init(struct gpmi_nand_data *this) /* Send the command to read the conventional block mark. */ nand_select_target(chip, chipnr); - nand_read_page_op(chip, page, mtd->writesize, NULL, 0); - block_mark = chip->legacy.read_byte(chip); + ret = nand_read_page_op(chip, page, mtd->writesize, &block_mark, + 1); nand_deselect_target(chip); + if (ret) + continue; + /* * Check if the block is marked bad. If so, we need to mark it * again, but this time the result will be a mark in the @@ -1890,9 +2221,330 @@ static int gpmi_nand_attach_chip(struct nand_chip *chip) return 0; } +static struct gpmi_transfer *get_next_transfer(struct gpmi_nand_data *this) +{ + struct gpmi_transfer *transfer = &this->transfers[this->ntransfers]; + + this->ntransfers++; + + if (this->ntransfers == GPMI_MAX_TRANSFERS) + return NULL; + + return transfer; +} + +static struct dma_async_tx_descriptor *gpmi_chain_command( + struct gpmi_nand_data *this, u8 cmd, const u8 *addr, int naddr) +{ + struct dma_chan *channel = get_dma_chan(this); + struct dma_async_tx_descriptor *desc; + struct gpmi_transfer *transfer; + int chip = this->nand.cur_cs; + u32 pio[3]; + + /* [1] send out the PIO words */ + pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE) + | BM_GPMI_CTRL0_WORD_LENGTH + | BF_GPMI_CTRL0_CS(chip, this) + | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) + | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE) + | BM_GPMI_CTRL0_ADDRESS_INCREMENT + | BF_GPMI_CTRL0_XFER_COUNT(naddr + 1); + pio[1] = 0; + pio[2] = 0; + desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio), + DMA_TRANS_NONE, 0); + if (!desc) + return NULL; + + transfer = get_next_transfer(this); + if (!transfer) + return NULL; + + transfer->cmdbuf[0] = cmd; + if (naddr) + memcpy(&transfer->cmdbuf[1], addr, naddr); + + sg_init_one(&transfer->sgl, transfer->cmdbuf, naddr + 1); + dma_map_sg(this->dev, &transfer->sgl, 1, DMA_TO_DEVICE); + + transfer->direction = DMA_TO_DEVICE; + + desc = dmaengine_prep_slave_sg(channel, &transfer->sgl, 1, DMA_MEM_TO_DEV, + MXS_DMA_CTRL_WAIT4END); + return desc; +} + +static struct dma_async_tx_descriptor *gpmi_chain_wait_ready( + struct gpmi_nand_data *this) +{ + struct dma_chan *channel = get_dma_chan(this); + u32 pio[2]; + + pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY) + | BM_GPMI_CTRL0_WORD_LENGTH + | BF_GPMI_CTRL0_CS(this->nand.cur_cs, this) + | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) + | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA) + | BF_GPMI_CTRL0_XFER_COUNT(0); + pio[1] = 0; + + return mxs_dmaengine_prep_pio(channel, pio, 2, DMA_TRANS_NONE, + MXS_DMA_CTRL_WAIT4END | MXS_DMA_CTRL_WAIT4RDY); +} + +static struct dma_async_tx_descriptor *gpmi_chain_data_read( + struct gpmi_nand_data *this, void *buf, int raw_len, bool *direct) +{ + struct dma_async_tx_descriptor *desc; + struct dma_chan *channel = get_dma_chan(this); + struct gpmi_transfer *transfer; + u32 pio[6] = {}; + + transfer = get_next_transfer(this); + if (!transfer) + return NULL; + + transfer->direction = DMA_FROM_DEVICE; + + *direct = prepare_data_dma(this, buf, raw_len, &transfer->sgl, + DMA_FROM_DEVICE); + + pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ) + | BM_GPMI_CTRL0_WORD_LENGTH + | BF_GPMI_CTRL0_CS(this->nand.cur_cs, this) + | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) + | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA) + | BF_GPMI_CTRL0_XFER_COUNT(raw_len); + + if (this->bch) { + pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC + | BF_GPMI_ECCCTRL_ECC_CMD(BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE) + | BF_GPMI_ECCCTRL_BUFFER_MASK(BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE + | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY); + pio[3] = raw_len; + pio[4] = transfer->sgl.dma_address; + pio[5] = this->auxiliary_phys; + } + + desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio), + DMA_TRANS_NONE, 0); + if (!desc) + return NULL; + + if (!this->bch) + desc = dmaengine_prep_slave_sg(channel, &transfer->sgl, 1, + DMA_DEV_TO_MEM, + MXS_DMA_CTRL_WAIT4END); + + return desc; +} + +static struct dma_async_tx_descriptor *gpmi_chain_data_write( + struct gpmi_nand_data *this, const void *buf, int raw_len) +{ + struct dma_chan *channel = get_dma_chan(this); + struct dma_async_tx_descriptor *desc; + struct gpmi_transfer *transfer; + u32 pio[6] = {}; + + transfer = get_next_transfer(this); + if (!transfer) + return NULL; + + transfer->direction = DMA_TO_DEVICE; + + prepare_data_dma(this, buf, raw_len, &transfer->sgl, DMA_TO_DEVICE); + + pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE) + | BM_GPMI_CTRL0_WORD_LENGTH + | BF_GPMI_CTRL0_CS(this->nand.cur_cs, this) + | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this) + | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA) + | BF_GPMI_CTRL0_XFER_COUNT(raw_len); + + if (this->bch) { + pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC + | BF_GPMI_ECCCTRL_ECC_CMD(BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE) + | BF_GPMI_ECCCTRL_BUFFER_MASK(BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE | + BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY); + pio[3] = raw_len; + pio[4] = transfer->sgl.dma_address; + pio[5] = this->auxiliary_phys; + } + + desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio), + DMA_TRANS_NONE, + (this->bch ? MXS_DMA_CTRL_WAIT4END : 0)); + if (!desc) + return NULL; + + if (!this->bch) + desc = dmaengine_prep_slave_sg(channel, &transfer->sgl, 1, + DMA_MEM_TO_DEV, + MXS_DMA_CTRL_WAIT4END); + + return desc; +} + +static int gpmi_nfc_exec_op(struct nand_chip *chip, + const struct nand_operation *op, + bool check_only) +{ + const struct nand_op_instr *instr; + struct gpmi_nand_data *this = nand_get_controller_data(chip); + struct dma_async_tx_descriptor *desc = NULL; + int i, ret, buf_len = 0, nbufs = 0; + u8 cmd = 0; + void *buf_read = NULL; + const void *buf_write = NULL; + bool direct = false; + struct completion *completion; + unsigned long to; + + this->ntransfers = 0; + for (i = 0; i < GPMI_MAX_TRANSFERS; i++) + this->transfers[i].direction = DMA_NONE; + + ret = pm_runtime_get_sync(this->dev); + if (ret < 0) + return ret; + + /* + * This driver currently supports only one NAND chip. Plus, dies share + * the same configuration. So once timings have been applied on the + * controller side, they will not change anymore. When the time will + * come, the check on must_apply_timings will have to be dropped. + */ + if (this->hw.must_apply_timings) { + this->hw.must_apply_timings = false; + gpmi_nfc_apply_timings(this); + } + + dev_dbg(this->dev, "%s: %d instructions\n", __func__, op->ninstrs); + + for (i = 0; i < op->ninstrs; i++) { + instr = &op->instrs[i]; + + nand_op_trace(" ", instr); + + switch (instr->type) { + case NAND_OP_WAITRDY_INSTR: + desc = gpmi_chain_wait_ready(this); + break; + case NAND_OP_CMD_INSTR: + cmd = instr->ctx.cmd.opcode; + + /* + * When this command has an address cycle chain it + * together with the address cycle + */ + if (i + 1 != op->ninstrs && + op->instrs[i + 1].type == NAND_OP_ADDR_INSTR) + continue; + + desc = gpmi_chain_command(this, cmd, NULL, 0); + + break; + case NAND_OP_ADDR_INSTR: + desc = gpmi_chain_command(this, cmd, instr->ctx.addr.addrs, + instr->ctx.addr.naddrs); + break; + case NAND_OP_DATA_OUT_INSTR: + buf_write = instr->ctx.data.buf.out; + buf_len = instr->ctx.data.len; + nbufs++; + + desc = gpmi_chain_data_write(this, buf_write, buf_len); + + break; + case NAND_OP_DATA_IN_INSTR: + if (!instr->ctx.data.len) + break; + buf_read = instr->ctx.data.buf.in; + buf_len = instr->ctx.data.len; + nbufs++; + + desc = gpmi_chain_data_read(this, buf_read, buf_len, + &direct); + break; + } + + if (!desc) { + ret = -ENXIO; + goto unmap; + } + } + + dev_dbg(this->dev, "%s setup done\n", __func__); + + if (nbufs > 1) { + dev_err(this->dev, "Multiple data instructions not supported\n"); + ret = -EINVAL; + goto unmap; + } + + if (this->bch) { + writel(this->bch_flashlayout0, + this->resources.bch_regs + HW_BCH_FLASH0LAYOUT0); + writel(this->bch_flashlayout1, + this->resources.bch_regs + HW_BCH_FLASH0LAYOUT1); + } + + if (this->bch && buf_read) { + writel(BM_BCH_CTRL_COMPLETE_IRQ_EN, + this->resources.bch_regs + HW_BCH_CTRL_SET); + completion = &this->bch_done; + } else { + desc->callback = dma_irq_callback; + desc->callback_param = this; + completion = &this->dma_done; + } + + init_completion(completion); + + dmaengine_submit(desc); + dma_async_issue_pending(get_dma_chan(this)); + + to = wait_for_completion_timeout(completion, msecs_to_jiffies(1000)); + if (!to) { + dev_err(this->dev, "DMA timeout, last DMA\n"); + gpmi_dump_info(this); + ret = -ETIMEDOUT; + goto unmap; + } + + writel(BM_BCH_CTRL_COMPLETE_IRQ_EN, + this->resources.bch_regs + HW_BCH_CTRL_CLR); + gpmi_clear_bch(this); + + ret = 0; + +unmap: + for (i = 0; i < this->ntransfers; i++) { + struct gpmi_transfer *transfer = &this->transfers[i]; + + if (transfer->direction != DMA_NONE) + dma_unmap_sg(this->dev, &transfer->sgl, 1, + transfer->direction); + } + + if (!ret && buf_read && !direct) + memcpy(buf_read, this->data_buffer_dma, + gpmi_raw_len_to_len(this, buf_len)); + + this->bch = false; + + pm_runtime_mark_last_busy(this->dev); + pm_runtime_put_autosuspend(this->dev); + + return ret; +} + static const struct nand_controller_ops gpmi_nand_controller_ops = { .attach_chip = gpmi_nand_attach_chip, .setup_data_interface = gpmi_setup_data_interface, + .exec_op = gpmi_nfc_exec_op, }; static int gpmi_nand_init(struct gpmi_nand_data *this) @@ -1901,9 +2553,6 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) struct mtd_info *mtd = nand_to_mtd(chip); int ret; - /* init current chip */ - this->current_chip = -1; - /* init the MTD data structures */ mtd->name = "gpmi-nand"; mtd->dev.parent = this->dev; @@ -1911,14 +2560,8 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */ nand_set_controller_data(chip, this); nand_set_flash_node(chip, this->pdev->dev.of_node); - chip->legacy.select_chip = gpmi_select_chip; - chip->legacy.cmd_ctrl = gpmi_cmd_ctrl; - chip->legacy.dev_ready = gpmi_dev_ready; - chip->legacy.read_byte = gpmi_read_byte; - chip->legacy.read_buf = gpmi_read_buf; - chip->legacy.write_buf = gpmi_write_buf; - chip->badblock_pattern = &gpmi_bbt_descr; chip->legacy.block_markbad = gpmi_block_markbad; + chip->badblock_pattern = &gpmi_bbt_descr; chip->options |= NAND_NO_SUBPAGE_WRITE; /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */ @@ -1934,7 +2577,10 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) if (ret) goto err_out; - chip->legacy.dummy_controller.ops = &gpmi_nand_controller_ops; + nand_controller_init(&this->base); + this->base.ops = &gpmi_nand_controller_ops; + chip->controller = &this->base; + ret = nand_scan(chip, GPMI_IS_MX6(this) ? 2 : 1); if (ret) goto err_out; @@ -2004,6 +2650,16 @@ static int gpmi_nand_probe(struct platform_device *pdev) if (ret) goto exit_acquire_resources; + ret = __gpmi_enable_clk(this, true); + if (ret) + goto exit_nfc_init; + + pm_runtime_set_autosuspend_delay(&pdev->dev, 500); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + ret = gpmi_init(this); if (ret) goto exit_nfc_init; @@ -2012,11 +2668,16 @@ static int gpmi_nand_probe(struct platform_device *pdev) if (ret) goto exit_nfc_init; + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + dev_info(this->dev, "driver registered.\n"); return 0; exit_nfc_init: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); release_resources(this); exit_acquire_resources: @@ -2027,6 +2688,9 @@ static int gpmi_nand_remove(struct platform_device *pdev) { struct gpmi_nand_data *this = platform_get_drvdata(pdev); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + nand_release(&this->nand); gpmi_free_dma_buffer(this); release_resources(this); @@ -2069,8 +2733,23 @@ static int gpmi_pm_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ +static int __maybe_unused gpmi_runtime_suspend(struct device *dev) +{ + struct gpmi_nand_data *this = dev_get_drvdata(dev); + + return __gpmi_enable_clk(this, false); +} + +static int __maybe_unused gpmi_runtime_resume(struct device *dev) +{ + struct gpmi_nand_data *this = dev_get_drvdata(dev); + + return __gpmi_enable_clk(this, true); +} + static const struct dev_pm_ops gpmi_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume) + SET_RUNTIME_PM_OPS(gpmi_runtime_suspend, gpmi_runtime_resume, NULL) }; static struct platform_driver gpmi_nand_driver = { diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h index a804a4a5bd46..fdc5ed7de083 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h @@ -103,6 +103,14 @@ struct gpmi_nfc_hardware_timing { u32 ctrl1n; }; +#define GPMI_MAX_TRANSFERS 8 + +struct gpmi_transfer { + u8 cmdbuf[8]; + struct scatterlist sgl; + enum dma_data_direction direction; +}; + struct gpmi_nand_data { /* Devdata */ const struct gpmi_devdata *devdata; @@ -126,25 +134,18 @@ struct gpmi_nand_data { struct boot_rom_geometry rom_geometry; /* MTD / NAND */ + struct nand_controller base; struct nand_chip nand; - /* General-use Variables */ - int current_chip; - unsigned int command_length; + struct gpmi_transfer transfers[GPMI_MAX_TRANSFERS]; + int ntransfers; - struct scatterlist cmd_sgl; - char *cmd_buffer; + bool bch; + uint32_t bch_flashlayout0; + uint32_t bch_flashlayout1; - struct scatterlist data_sgl; char *data_buffer_dma; - void *page_buffer_virt; - dma_addr_t page_buffer_phys; - unsigned int page_buffer_size; - - void *payload_virt; - dma_addr_t payload_phys; - void *auxiliary_virt; dma_addr_t auxiliary_phys; @@ -154,45 +155,8 @@ struct gpmi_nand_data { #define DMA_CHANS 8 struct dma_chan *dma_chans[DMA_CHANS]; struct completion dma_done; - - /* private */ - void *private; }; -/* Common Services */ -int common_nfc_set_geometry(struct gpmi_nand_data *); -struct dma_chan *get_dma_chan(struct gpmi_nand_data *); -bool prepare_data_dma(struct gpmi_nand_data *, const void *buf, int len, - enum dma_data_direction dr); -int start_dma_without_bch_irq(struct gpmi_nand_data *, - struct dma_async_tx_descriptor *); -int start_dma_with_bch_irq(struct gpmi_nand_data *, - struct dma_async_tx_descriptor *); - -/* GPMI-NAND helper function library */ -int gpmi_init(struct gpmi_nand_data *); -void gpmi_clear_bch(struct gpmi_nand_data *); -void gpmi_dump_info(struct gpmi_nand_data *); -int bch_set_geometry(struct gpmi_nand_data *); -int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip); -int gpmi_send_command(struct gpmi_nand_data *); -int gpmi_enable_clk(struct gpmi_nand_data *this); -int gpmi_disable_clk(struct gpmi_nand_data *this); -int gpmi_setup_data_interface(struct nand_chip *chip, int chipnr, - const struct nand_data_interface *conf); -void gpmi_nfc_apply_timings(struct gpmi_nand_data *this); -int gpmi_read_data(struct gpmi_nand_data *, void *buf, int len); -int gpmi_send_data(struct gpmi_nand_data *, const void *buf, int len); - -int gpmi_send_page(struct gpmi_nand_data *, - dma_addr_t payload, dma_addr_t auxiliary); -int gpmi_read_page(struct gpmi_nand_data *, - dma_addr_t payload, dma_addr_t auxiliary); - -void gpmi_copy_bits(u8 *dst, size_t dst_bit_off, - const u8 *src, size_t src_bit_off, - size_t nbits); - /* BCH : Status Block Completion Codes */ #define STATUS_GOOD 0x00 #define STATUS_ERASED 0xff diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c index 0f90e060dae8..74595b644b7c 100644 --- a/drivers/mtd/nand/raw/mtk_ecc.c +++ b/drivers/mtd/nand/raw/mtk_ecc.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0-only +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * MTK ECC controller driver. * Copyright (C) 2016 MediaTek Inc. @@ -596,4 +596,4 @@ module_platform_driver(mtk_ecc_driver); MODULE_AUTHOR("Xiaolei Li <xiaolei.li@mediatek.com>"); MODULE_DESCRIPTION("MTK Nand ECC Driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("Dual MIT/GPL"); diff --git a/drivers/mtd/nand/raw/mtk_ecc.h b/drivers/mtd/nand/raw/mtk_ecc.h index aa52e94c771d..0e48c36e6ca0 100644 --- a/drivers/mtd/nand/raw/mtk_ecc.h +++ b/drivers/mtd/nand/raw/mtk_ecc.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ /* * MTK SDG1 ECC controller * diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c index dceff28c9a31..373d47d1ba4c 100644 --- a/drivers/mtd/nand/raw/mtk_nand.c +++ b/drivers/mtd/nand/raw/mtk_nand.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0-only +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * MTK NAND Flash controller driver. * Copyright (C) 2016 MediaTek Inc. @@ -79,6 +79,10 @@ #define NFI_FDMM(x) (0xA4 + (x) * sizeof(u32) * 2) #define NFI_FDM_MAX_SIZE (8) #define NFI_FDM_MIN_SIZE (1) +#define NFI_DEBUG_CON1 (0x220) +#define STROBE_MASK GENMASK(4, 3) +#define STROBE_SHIFT (3) +#define MAX_STROBE_DLY (3) #define NFI_MASTER_STA (0x224) #define MASTER_STA_MASK (0x0FFF) #define NFI_EMPTY_THRESH (0x23C) @@ -150,6 +154,8 @@ struct mtk_nfc { struct list_head chips; u8 *buffer; + + unsigned long assigned_cs; }; /* @@ -500,7 +506,8 @@ static int mtk_nfc_setup_data_interface(struct nand_chip *chip, int csline, { struct mtk_nfc *nfc = nand_get_controller_data(chip); const struct nand_sdr_timings *timings; - u32 rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt; + u32 rate, tpoecs, tprecs, tc2r, tw2r, twh, twst = 0, trlt = 0; + u32 temp, tsel = 0; timings = nand_get_sdr_timings(conf); if (IS_ERR(timings)) @@ -536,14 +543,53 @@ static int mtk_nfc_setup_data_interface(struct nand_chip *chip, int csline, twh = DIV_ROUND_UP(twh * rate, 1000000) - 1; twh &= 0xf; - twst = timings->tWP_min / 1000; + /* Calculate real WE#/RE# hold time in nanosecond */ + temp = (twh + 1) * 1000000 / rate; + /* nanosecond to picosecond */ + temp *= 1000; + + /* + * WE# low level time should be expaned to meet WE# pulse time + * and WE# cycle time at the same time. + */ + if (temp < timings->tWC_min) + twst = timings->tWC_min - temp; + twst = max(timings->tWP_min, twst) / 1000; twst = DIV_ROUND_UP(twst * rate, 1000000) - 1; twst &= 0xf; - trlt = max(timings->tREA_max, timings->tRP_min) / 1000; + /* + * RE# low level time should be expaned to meet RE# pulse time + * and RE# cycle time at the same time. + */ + if (temp < timings->tRC_min) + trlt = timings->tRC_min - temp; + trlt = max(trlt, timings->tRP_min) / 1000; trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1; trlt &= 0xf; + /* Calculate RE# pulse time in nanosecond. */ + temp = (trlt + 1) * 1000000 / rate; + /* nanosecond to picosecond */ + temp *= 1000; + /* + * If RE# access time is bigger than RE# pulse time, + * delay sampling data timing. + */ + if (temp < timings->tREA_max) { + tsel = timings->tREA_max / 1000; + tsel = DIV_ROUND_UP(tsel * rate, 1000000); + tsel -= (trlt + 1); + if (tsel > MAX_STROBE_DLY) { + trlt += tsel - MAX_STROBE_DLY; + tsel = MAX_STROBE_DLY; + } + } + temp = nfi_readl(nfc, NFI_DEBUG_CON1); + temp &= ~STROBE_MASK; + temp |= tsel << STROBE_SHIFT; + nfi_writel(nfc, temp, NFI_DEBUG_CON1); + /* * ACCON: access timing control register * ------------------------------------- @@ -835,19 +881,21 @@ static int mtk_nfc_write_oob_std(struct nand_chip *chip, int page) return mtk_nfc_write_page_raw(chip, NULL, 1, page); } -static int mtk_nfc_update_ecc_stats(struct mtd_info *mtd, u8 *buf, u32 sectors) +static int mtk_nfc_update_ecc_stats(struct mtd_info *mtd, u8 *buf, u32 start, + u32 sectors) { struct nand_chip *chip = mtd_to_nand(mtd); struct mtk_nfc *nfc = nand_get_controller_data(chip); struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip); struct mtk_ecc_stats stats; + u32 reg_size = mtk_nand->fdm.reg_size; int rc, i; rc = nfi_readl(nfc, NFI_STA) & STA_EMP_PAGE; if (rc) { memset(buf, 0xff, sectors * chip->ecc.size); for (i = 0; i < sectors; i++) - memset(oob_ptr(chip, i), 0xff, mtk_nand->fdm.reg_size); + memset(oob_ptr(chip, start + i), 0xff, reg_size); return 0; } @@ -867,7 +915,7 @@ static int mtk_nfc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, u32 spare = mtk_nand->spare_per_sector; u32 column, sectors, start, end, reg; dma_addr_t addr; - int bitflips; + int bitflips = 0; size_t len; u8 *buf; int rc; @@ -934,14 +982,11 @@ static int mtk_nfc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, if (rc < 0) { dev_err(nfc->dev, "subpage done timeout\n"); bitflips = -EIO; - } else { - bitflips = 0; - if (!raw) { - rc = mtk_ecc_wait_done(nfc->ecc, ECC_DECODE); - bitflips = rc < 0 ? -ETIMEDOUT : - mtk_nfc_update_ecc_stats(mtd, buf, sectors); - mtk_nfc_read_fdm(chip, start, sectors); - } + } else if (!raw) { + rc = mtk_ecc_wait_done(nfc->ecc, ECC_DECODE); + bitflips = rc < 0 ? -ETIMEDOUT : + mtk_nfc_update_ecc_stats(mtd, buf, start, sectors); + mtk_nfc_read_fdm(chip, start, sectors); } dma_unmap_single(nfc->dev, addr, len, DMA_FROM_DEVICE); @@ -1315,6 +1360,17 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc, dev_err(dev, "reg property failure : %d\n", ret); return ret; } + + if (tmp >= MTK_NAND_MAX_NSELS) { + dev_err(dev, "invalid CS: %u\n", tmp); + return -EINVAL; + } + + if (test_and_set_bit(tmp, &nfc->assigned_cs)) { + dev_err(dev, "CS %u already assigned\n", tmp); + return -EINVAL; + } + chip->sels[i] = tmp; } @@ -1589,6 +1645,6 @@ static struct platform_driver mtk_nfc_driver = { module_platform_driver(mtk_nfc_driver); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("Dual MIT/GPL"); MODULE_AUTHOR("Xiaolei Li <xiaolei.li@mediatek.com>"); MODULE_DESCRIPTION("MTK Nand Flash Controller Driver"); diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 6eb131292eb2..91f046d4d452 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -2111,35 +2111,7 @@ static void nand_op_parser_trace(const struct nand_op_parser_ctx *ctx) if (instr == &ctx->subop.instrs[0]) prefix = " ->"; - switch (instr->type) { - case NAND_OP_CMD_INSTR: - pr_debug("%sCMD [0x%02x]\n", prefix, - instr->ctx.cmd.opcode); - break; - case NAND_OP_ADDR_INSTR: - pr_debug("%sADDR [%d cyc: %*ph]\n", prefix, - instr->ctx.addr.naddrs, - instr->ctx.addr.naddrs < 64 ? - instr->ctx.addr.naddrs : 64, - instr->ctx.addr.addrs); - break; - case NAND_OP_DATA_IN_INSTR: - pr_debug("%sDATA_IN [%d B%s]\n", prefix, - instr->ctx.data.len, - instr->ctx.data.force_8bit ? - ", force 8-bit" : ""); - break; - case NAND_OP_DATA_OUT_INSTR: - pr_debug("%sDATA_OUT [%d B%s]\n", prefix, - instr->ctx.data.len, - instr->ctx.data.force_8bit ? - ", force 8-bit" : ""); - break; - case NAND_OP_WAITRDY_INSTR: - pr_debug("%sWAITRDY [max %d ms]\n", prefix, - instr->ctx.waitrdy.timeout_ms); - break; - } + nand_op_trace(prefix, instr); if (instr == &ctx->subop.instrs[ctx->subop.ninstrs - 1]) prefix = " "; @@ -2152,6 +2124,22 @@ static void nand_op_parser_trace(const struct nand_op_parser_ctx *ctx) } #endif +static int nand_op_parser_cmp_ctx(const struct nand_op_parser_ctx *a, + const struct nand_op_parser_ctx *b) +{ + if (a->subop.ninstrs < b->subop.ninstrs) + return -1; + else if (a->subop.ninstrs > b->subop.ninstrs) + return 1; + + if (a->subop.last_instr_end_off < b->subop.last_instr_end_off) + return -1; + else if (a->subop.last_instr_end_off > b->subop.last_instr_end_off) + return 1; + + return 0; +} + /** * nand_op_parser_exec_op - exec_op parser * @chip: the NAND chip @@ -2186,32 +2174,40 @@ int nand_op_parser_exec_op(struct nand_chip *chip, unsigned int i; while (ctx.subop.instrs < op->instrs + op->ninstrs) { - int ret; + const struct nand_op_parser_pattern *pattern; + struct nand_op_parser_ctx best_ctx; + int ret, best_pattern = -1; for (i = 0; i < parser->npatterns; i++) { - const struct nand_op_parser_pattern *pattern; + struct nand_op_parser_ctx test_ctx = ctx; pattern = &parser->patterns[i]; - if (!nand_op_parser_match_pat(pattern, &ctx)) + if (!nand_op_parser_match_pat(pattern, &test_ctx)) continue; - nand_op_parser_trace(&ctx); - - if (check_only) - break; - - ret = pattern->exec(chip, &ctx.subop); - if (ret) - return ret; + if (best_pattern >= 0 && + nand_op_parser_cmp_ctx(&test_ctx, &best_ctx) <= 0) + continue; - break; + best_pattern = i; + best_ctx = test_ctx; } - if (i == parser->npatterns) { + if (best_pattern < 0) { pr_debug("->exec_op() parser: pattern not found!\n"); return -ENOTSUPP; } + ctx = best_ctx; + nand_op_parser_trace(&ctx); + + if (!check_only) { + pattern = &parser->patterns[best_pattern]; + ret = pattern->exec(chip, &ctx.subop); + if (ret) + return ret; + } + /* * Update the context structure by pointing to the start of the * next subop. diff --git a/drivers/mtd/nand/raw/nand_bch.c b/drivers/mtd/nand/raw/nand_bch.c index 55aa4c1cd414..17527310c3a1 100644 --- a/drivers/mtd/nand/raw/nand_bch.c +++ b/drivers/mtd/nand/raw/nand_bch.c @@ -170,7 +170,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) goto fail; } - nbc->eccmask = kmalloc(eccbytes, GFP_KERNEL); + nbc->eccmask = kzalloc(eccbytes, GFP_KERNEL); nbc->errloc = kmalloc_array(t, sizeof(*nbc->errloc), GFP_KERNEL); if (!nbc->eccmask || !nbc->errloc) goto fail; @@ -182,7 +182,6 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) goto fail; memset(erased_page, 0xff, eccsize); - memset(nbc->eccmask, 0, eccbytes); encode_bch(nbc->bch, erased_page, eccsize, nbc->eccmask); kfree(erased_page); diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c index fad57c378dd2..58511aeb0c9a 100644 --- a/drivers/mtd/nand/raw/nand_macronix.c +++ b/drivers/mtd/nand/raw/nand_macronix.c @@ -8,6 +8,50 @@ #include "internals.h" +#define MACRONIX_READ_RETRY_BIT BIT(0) +#define MACRONIX_NUM_READ_RETRY_MODES 6 + +struct nand_onfi_vendor_macronix { + u8 reserved; + u8 reliability_func; +} __packed; + +static int macronix_nand_setup_read_retry(struct nand_chip *chip, int mode) +{ + u8 feature[ONFI_SUBFEATURE_PARAM_LEN]; + + if (!chip->parameters.supports_set_get_features || + !test_bit(ONFI_FEATURE_ADDR_READ_RETRY, + chip->parameters.set_feature_list)) + return -ENOTSUPP; + + feature[0] = mode; + return nand_set_features(chip, ONFI_FEATURE_ADDR_READ_RETRY, feature); +} + +static void macronix_nand_onfi_init(struct nand_chip *chip) +{ + struct nand_parameters *p = &chip->parameters; + struct nand_onfi_vendor_macronix *mxic; + + if (!p->onfi) + return; + + mxic = (struct nand_onfi_vendor_macronix *)p->onfi->vendor; + if ((mxic->reliability_func & MACRONIX_READ_RETRY_BIT) == 0) + return; + + chip->read_retries = MACRONIX_NUM_READ_RETRY_MODES; + chip->setup_read_retry = macronix_nand_setup_read_retry; + + if (p->supports_set_get_features) { + bitmap_set(p->set_feature_list, + ONFI_FEATURE_ADDR_READ_RETRY, 1); + bitmap_set(p->get_feature_list, + ONFI_FEATURE_ADDR_READ_RETRY, 1); + } +} + /* * Macronix AC series does not support using SET/GET_FEATURES to change * the timings unlike what is declared in the parameter page. Unflag @@ -56,6 +100,7 @@ static int macronix_nand_init(struct nand_chip *chip) chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE; macronix_nand_fix_broken_get_timings(chip); + macronix_nand_onfi_init(chip); return 0; } diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index 999ca6a66036..e63acc077c18 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -37,6 +37,8 @@ /* Max ECC buffer length */ #define FMC2_MAX_ECC_BUF_LEN (FMC2_BCHDSRS_LEN * FMC2_MAX_SG) +#define FMC2_TIMEOUT_MS 1000 + /* Timings */ #define FMC2_THIZ 1 #define FMC2_TIO 8000 @@ -530,7 +532,8 @@ static int stm32_fmc2_ham_calculate(struct nand_chip *chip, const u8 *data, int ret; ret = readl_relaxed_poll_timeout(fmc2->io_base + FMC2_SR, - sr, sr & FMC2_SR_NWRF, 10, 1000); + sr, sr & FMC2_SR_NWRF, 10, + FMC2_TIMEOUT_MS); if (ret) { dev_err(fmc2->dev, "ham timeout\n"); return ret; @@ -611,7 +614,7 @@ static int stm32_fmc2_bch_calculate(struct nand_chip *chip, const u8 *data, /* Wait until the BCH code is ready */ if (!wait_for_completion_timeout(&fmc2->complete, - msecs_to_jiffies(1000))) { + msecs_to_jiffies(FMC2_TIMEOUT_MS))) { dev_err(fmc2->dev, "bch timeout\n"); stm32_fmc2_disable_bch_irq(fmc2); return -ETIMEDOUT; @@ -696,7 +699,7 @@ static int stm32_fmc2_bch_correct(struct nand_chip *chip, u8 *dat, /* Wait until the decoding error is ready */ if (!wait_for_completion_timeout(&fmc2->complete, - msecs_to_jiffies(1000))) { + msecs_to_jiffies(FMC2_TIMEOUT_MS))) { dev_err(fmc2->dev, "bch timeout\n"); stm32_fmc2_disable_bch_irq(fmc2); return -ETIMEDOUT; @@ -969,7 +972,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf, /* Wait end of sequencer transfer */ if (!wait_for_completion_timeout(&fmc2->complete, - msecs_to_jiffies(1000))) { + msecs_to_jiffies(FMC2_TIMEOUT_MS))) { dev_err(fmc2->dev, "seq timeout\n"); stm32_fmc2_disable_seq_irq(fmc2); dmaengine_terminate_all(dma_ch); @@ -981,7 +984,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf, /* Wait DMA data transfer completion */ if (!wait_for_completion_timeout(&fmc2->dma_data_complete, - msecs_to_jiffies(100))) { + msecs_to_jiffies(FMC2_TIMEOUT_MS))) { dev_err(fmc2->dev, "data DMA timeout\n"); dmaengine_terminate_all(dma_ch); ret = -ETIMEDOUT; @@ -990,7 +993,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf, /* Wait DMA ECC transfer completion */ if (!write_data && !raw) { if (!wait_for_completion_timeout(&fmc2->dma_ecc_complete, - msecs_to_jiffies(100))) { + msecs_to_jiffies(FMC2_TIMEOUT_MS))) { dev_err(fmc2->dev, "ECC DMA timeout\n"); dmaengine_terminate_all(fmc2->dma_ecc_ch); ret = -ETIMEDOUT; @@ -1909,6 +1912,12 @@ static int stm32_fmc2_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); + if (irq < 0) { + if (irq != -EPROBE_DEFER) + dev_err(dev, "IRQ error missing or invalid\n"); + return irq; + } + ret = devm_request_irq(dev, irq, stm32_fmc2_irq, 0, dev_name(dev), fmc2); if (ret) { diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile index 753125082640..9662b9c1d5a9 100644 --- a/drivers/mtd/nand/spi/Makefile +++ b/drivers/mtd/nand/spi/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o +spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o obj-$(CONFIG_MTD_SPI_NAND) += spinand.o diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index 4c15bb58c623..89f6beefb01c 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -511,12 +511,12 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from, if (ret == -EBADMSG) { ecc_failed = true; mtd->ecc_stats.failed++; - ret = 0; } else { mtd->ecc_stats.corrected += ret; max_bitflips = max_t(unsigned int, max_bitflips, ret); } + ret = 0; ops->retlen += iter.req.datalen; ops->oobretlen += iter.req.ooblen; } @@ -757,6 +757,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = { &gigadevice_spinand_manufacturer, ¯onix_spinand_manufacturer, µn_spinand_manufacturer, + ¶gon_spinand_manufacturer, &toshiba_spinand_manufacturer, &winbond_spinand_manufacturer, }; @@ -845,7 +846,7 @@ spinand_select_op_variant(struct spinand_device *spinand, */ int spinand_match_and_init(struct spinand_device *spinand, const struct spinand_info *table, - unsigned int table_size, u8 devid) + unsigned int table_size, u16 devid) { struct nand_device *nand = spinand_to_nand(spinand); unsigned int i; diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c index e6c646007cda..e99d425aa93f 100644 --- a/drivers/mtd/nand/spi/gigadevice.c +++ b/drivers/mtd/nand/spi/gigadevice.c @@ -9,11 +9,17 @@ #include <linux/mtd/spinand.h> #define SPINAND_MFR_GIGADEVICE 0xC8 + #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4) #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4) #define GD5FXGQ4UEXXG_REG_STATUS2 0xf0 +#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK (7 << 4) +#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS (0 << 4) +#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4) +#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4) + static SPINAND_OP_VARIANTS(read_cache_variants, SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), @@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants, SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); +static SPINAND_OP_VARIANTS(read_cache_variants_f, + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0)); + static SPINAND_OP_VARIANTS(write_cache_variants, SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), SPINAND_PROG_LOAD(true, 0, NULL, 0)); @@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section, return 0; } +static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = { + .ecc = gd5fxgq4xa_ooblayout_ecc, + .free = gd5fxgq4xa_ooblayout_free, +}; + static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand, u8 status) { @@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand, return -EINVAL; } -static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section, +static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *region) { if (section) @@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section, return 0; } -static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section, +static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section, struct mtd_oob_region *region) { if (section) @@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section, return 0; } +static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = { + .ecc = gd5fxgq4_variant2_ooblayout_ecc, + .free = gd5fxgq4_variant2_ooblayout_free, +}; + static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand, u8 status) { @@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand, return -EINVAL; } -static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = { - .ecc = gd5fxgq4xa_ooblayout_ecc, - .free = gd5fxgq4xa_ooblayout_free, -}; +static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand, + u8 status) +{ + switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) { + case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS: + return 0; -static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = { - .ecc = gd5fxgq4uexxg_ooblayout_ecc, - .free = gd5fxgq4uexxg_ooblayout_free, -}; + case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS: + return 3; + + case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR: + return -EBADMSG; + + default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */ + return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2; + } + + return -EINVAL; +} static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_INFO("GD5F1GQ4xA", 0xF1, @@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = { &write_cache_variants, &update_cache_variants), 0, - SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout, + SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout, gd5fxgq4uexxg_ecc_get_status)), + SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148, + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout, + gd5fxgq4ufxxg_ecc_get_status)), }; static int gigadevice_spinand_detect(struct spinand_device *spinand) { u8 *id = spinand->id.data; + u16 did; int ret; /* - * For GD NANDs, There is an address byte needed to shift in before IDs - * are read out, so the first byte in raw_id is dummy. + * Earlier GDF5-series devices (A,E) return [0][MID][DID] + * Later (F) devices return [MID][DID1][DID2] */ - if (id[1] != SPINAND_MFR_GIGADEVICE) + + if (id[0] == SPINAND_MFR_GIGADEVICE) + did = (id[1] << 8) + id[2]; + else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE) + did = id[2]; + else return 0; ret = spinand_match_and_init(spinand, gigadevice_spinand_table, ARRAY_SIZE(gigadevice_spinand_table), - id[2]); + did); if (ret) return ret; diff --git a/drivers/mtd/nand/spi/paragon.c b/drivers/mtd/nand/spi/paragon.c new file mode 100644 index 000000000000..52307681cbd0 --- /dev/null +++ b/drivers/mtd/nand/spi/paragon.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Jeff Kletsky + * + * Author: Jeff Kletsky <git-commits@allycomm.com> + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/mtd/spinand.h> + + +#define SPINAND_MFR_PARAGON 0xa1 + + +#define PN26G0XA_STATUS_ECC_BITMASK (3 << 4) + +#define PN26G0XA_STATUS_ECC_NONE_DETECTED (0 << 4) +#define PN26G0XA_STATUS_ECC_1_7_CORRECTED (1 << 4) +#define PN26G0XA_STATUS_ECC_ERRORED (2 << 4) +#define PN26G0XA_STATUS_ECC_8_CORRECTED (3 << 4) + + +static SPINAND_OP_VARIANTS(read_cache_variants, + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); + +static SPINAND_OP_VARIANTS(write_cache_variants, + SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), + SPINAND_PROG_LOAD(true, 0, NULL, 0)); + +static SPINAND_OP_VARIANTS(update_cache_variants, + SPINAND_PROG_LOAD_X4(false, 0, NULL, 0), + SPINAND_PROG_LOAD(false, 0, NULL, 0)); + + +static int pn26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section > 3) + return -ERANGE; + + region->offset = 6 + (15 * section); /* 4 BBM + 2 user bytes */ + region->length = 13; + + return 0; +} + +static int pn26g0xa_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section > 4) + return -ERANGE; + + if (section == 4) { + region->offset = 64; + region->length = 64; + } else { + region->offset = 4 + (15 * section); + region->length = 2; + } + + return 0; +} + +static int pn26g0xa_ecc_get_status(struct spinand_device *spinand, + u8 status) +{ + switch (status & PN26G0XA_STATUS_ECC_BITMASK) { + case PN26G0XA_STATUS_ECC_NONE_DETECTED: + return 0; + + case PN26G0XA_STATUS_ECC_1_7_CORRECTED: + return 7; /* Return upper limit by convention */ + + case PN26G0XA_STATUS_ECC_8_CORRECTED: + return 8; + + case PN26G0XA_STATUS_ECC_ERRORED: + return -EBADMSG; + + default: + break; + } + + return -EINVAL; +} + +static const struct mtd_ooblayout_ops pn26g0xa_ooblayout = { + .ecc = pn26g0xa_ooblayout_ecc, + .free = pn26g0xa_ooblayout_free, +}; + + +static const struct spinand_info paragon_spinand_table[] = { + SPINAND_INFO("PN26G01A", 0xe1, + NAND_MEMORG(1, 2048, 128, 64, 1024, 21, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&pn26g0xa_ooblayout, + pn26g0xa_ecc_get_status)), + SPINAND_INFO("PN26G02A", 0xe2, + NAND_MEMORG(1, 2048, 128, 64, 2048, 41, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&pn26g0xa_ooblayout, + pn26g0xa_ecc_get_status)), +}; + +static int paragon_spinand_detect(struct spinand_device *spinand) +{ + u8 *id = spinand->id.data; + int ret; + + /* Read ID returns [0][MID][DID] */ + + if (id[1] != SPINAND_MFR_PARAGON) + return 0; + + ret = spinand_match_and_init(spinand, paragon_spinand_table, + ARRAY_SIZE(paragon_spinand_table), + id[2]); + if (ret) + return ret; + + return 1; +} + +static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = { + .detect = paragon_spinand_detect, +}; + +const struct spinand_manufacturer paragon_spinand_manufacturer = { + .id = SPINAND_MFR_PARAGON, + .name = "Paragon", + .ops = ¶gon_spinand_manuf_ops, +}; diff --git a/drivers/mtd/parsers/afs.c b/drivers/mtd/parsers/afs.c index f24d768eee30..752b6cf005f7 100644 --- a/drivers/mtd/parsers/afs.c +++ b/drivers/mtd/parsers/afs.c @@ -371,8 +371,7 @@ static int parse_afs_partitions(struct mtd_info *mtd, out_free_parts: while (i >= 0) { - if (parts[i].name) - kfree(parts[i].name); + kfree(parts[i].name); i--; } kfree(parts); diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 8e14248d2720..6de83277ce8b 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -105,11 +105,4 @@ config SPI_INTEL_SPI_PLATFORM To compile this driver as a module, choose M here: the module will be called intel-spi-platform. -config SPI_STM32_QUADSPI - tristate "STM32 Quad SPI controller" - depends on ARCH_STM32 || COMPILE_TEST - help - This enables support for the STM32 Quad SPI controller. - We only connect the NOR to this controller. - endif # MTD_SPI_NOR diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 189a15cca3ec..9c5ed03cdc19 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -8,4 +8,3 @@ obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o -obj-$(CONFIG_SPI_STM32_QUADSPI) += stm32-quadspi.o diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 67ade2c81b21..67f15a1f16fd 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -23,6 +23,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/reset.h> #include <linux/sched.h> #include <linux/spi/spi.h> #include <linux/timer.h> @@ -1325,6 +1326,7 @@ static int cqspi_probe(struct platform_device *pdev) struct cqspi_st *cqspi; struct resource *res; struct resource *res_ahb; + struct reset_control *rstc, *rstc_ocp; const struct cqspi_driver_platdata *ddata; int ret; int irq; @@ -1391,6 +1393,25 @@ static int cqspi_probe(struct platform_device *pdev) goto probe_clk_failed; } + /* Obtain QSPI reset control */ + rstc = devm_reset_control_get_optional_exclusive(dev, "qspi"); + if (IS_ERR(rstc)) { + dev_err(dev, "Cannot get QSPI reset.\n"); + return PTR_ERR(rstc); + } + + rstc_ocp = devm_reset_control_get_optional_exclusive(dev, "qspi-ocp"); + if (IS_ERR(rstc_ocp)) { + dev_err(dev, "Cannot get QSPI OCP reset.\n"); + return PTR_ERR(rstc_ocp); + } + + reset_control_assert(rstc); + reset_control_deassert(rstc); + + reset_control_assert(rstc_ocp); + reset_control_deassert(rstc_ocp); + cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk); ddata = of_device_get_match_data(dev); if (ddata && (ddata->quirks & CQSPI_NEEDS_WR_DELAY)) diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c index 5e2344768d53..b83c4ab6cd9f 100644 --- a/drivers/mtd/spi-nor/intel-spi-pci.c +++ b/drivers/mtd/spi-nor/intel-spi-pci.c @@ -64,6 +64,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info }, { }, diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 0c2ec1c21434..03cc788511d5 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -200,7 +200,7 @@ struct sfdp_header { * register does not modify status register 2. * - 101b: QE is bit 1 of status register 2. Status register 1 is read using * Read Status instruction 05h. Status register2 is read using - * instruction 35h. QE is set via Writ Status instruction 01h with + * instruction 35h. QE is set via Write Status instruction 01h with * two data bytes where bit 1 of the second byte is one. * [...] */ @@ -1776,6 +1776,28 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor) .flags = SPI_NOR_NO_FR | SPI_S3AN, static int +is25lp256_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + /* + * IS25LP256 supports 4B opcodes, but the BFPT advertises a + * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width. + * Overwrite the address width advertised by the BFPT. + */ + if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) == + BFPT_DWORD1_ADDRESS_BYTES_3_ONLY) + nor->addr_width = 4; + + return 0; +} + +static struct spi_nor_fixups is25lp256_fixups = { + .post_bfpt = is25lp256_post_bfpt_fixups, +}; + +static int mx25l25635_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, const struct sfdp_bfpt *bfpt, @@ -1916,7 +1938,8 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ) }, { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_4B_OPCODES) }, + SPI_NOR_4B_OPCODES) + .fixups = &is25lp256_fixups }, { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128, @@ -1969,6 +1992,9 @@ static const struct flash_info spi_nor_ids[] = { { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096, + SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | + NO_CHIP_ERASE) }, { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, /* Micron */ @@ -2085,6 +2111,11 @@ static const struct flash_info spi_nor_ids[] = { SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, + { + "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) }, { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) }, { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) }, @@ -2151,7 +2182,7 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); if (tmp < 0) { - dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp); + dev_err(nor->dev, "error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); } diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c deleted file mode 100644 index 33534f9e296b..000000000000 --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ /dev/null @@ -1,707 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Driver for stm32 quadspi controller - * - * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Ludovic Barre author <ludovic.barre@st.com>. - */ -#include <linux/clk.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/iopoll.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/spi-nor.h> -#include <linux/mutex.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/reset.h> -#include <linux/sizes.h> - -#define QUADSPI_CR 0x00 -#define CR_EN BIT(0) -#define CR_ABORT BIT(1) -#define CR_DMAEN BIT(2) -#define CR_TCEN BIT(3) -#define CR_SSHIFT BIT(4) -#define CR_DFM BIT(6) -#define CR_FSEL BIT(7) -#define CR_FTHRES_SHIFT 8 -#define CR_FTHRES_MASK GENMASK(12, 8) -#define CR_FTHRES(n) (((n) << CR_FTHRES_SHIFT) & CR_FTHRES_MASK) -#define CR_TEIE BIT(16) -#define CR_TCIE BIT(17) -#define CR_FTIE BIT(18) -#define CR_SMIE BIT(19) -#define CR_TOIE BIT(20) -#define CR_PRESC_SHIFT 24 -#define CR_PRESC_MASK GENMASK(31, 24) -#define CR_PRESC(n) (((n) << CR_PRESC_SHIFT) & CR_PRESC_MASK) - -#define QUADSPI_DCR 0x04 -#define DCR_CSHT_SHIFT 8 -#define DCR_CSHT_MASK GENMASK(10, 8) -#define DCR_CSHT(n) (((n) << DCR_CSHT_SHIFT) & DCR_CSHT_MASK) -#define DCR_FSIZE_SHIFT 16 -#define DCR_FSIZE_MASK GENMASK(20, 16) -#define DCR_FSIZE(n) (((n) << DCR_FSIZE_SHIFT) & DCR_FSIZE_MASK) - -#define QUADSPI_SR 0x08 -#define SR_TEF BIT(0) -#define SR_TCF BIT(1) -#define SR_FTF BIT(2) -#define SR_SMF BIT(3) -#define SR_TOF BIT(4) -#define SR_BUSY BIT(5) -#define SR_FLEVEL_SHIFT 8 -#define SR_FLEVEL_MASK GENMASK(13, 8) - -#define QUADSPI_FCR 0x0c -#define FCR_CTCF BIT(1) - -#define QUADSPI_DLR 0x10 - -#define QUADSPI_CCR 0x14 -#define CCR_INST_SHIFT 0 -#define CCR_INST_MASK GENMASK(7, 0) -#define CCR_INST(n) (((n) << CCR_INST_SHIFT) & CCR_INST_MASK) -#define CCR_IMODE_NONE (0U << 8) -#define CCR_IMODE_1 (1U << 8) -#define CCR_IMODE_2 (2U << 8) -#define CCR_IMODE_4 (3U << 8) -#define CCR_ADMODE_NONE (0U << 10) -#define CCR_ADMODE_1 (1U << 10) -#define CCR_ADMODE_2 (2U << 10) -#define CCR_ADMODE_4 (3U << 10) -#define CCR_ADSIZE_SHIFT 12 -#define CCR_ADSIZE_MASK GENMASK(13, 12) -#define CCR_ADSIZE(n) (((n) << CCR_ADSIZE_SHIFT) & CCR_ADSIZE_MASK) -#define CCR_ABMODE_NONE (0U << 14) -#define CCR_ABMODE_1 (1U << 14) -#define CCR_ABMODE_2 (2U << 14) -#define CCR_ABMODE_4 (3U << 14) -#define CCR_ABSIZE_8 (0U << 16) -#define CCR_ABSIZE_16 (1U << 16) -#define CCR_ABSIZE_24 (2U << 16) -#define CCR_ABSIZE_32 (3U << 16) -#define CCR_DCYC_SHIFT 18 -#define CCR_DCYC_MASK GENMASK(22, 18) -#define CCR_DCYC(n) (((n) << CCR_DCYC_SHIFT) & CCR_DCYC_MASK) -#define CCR_DMODE_NONE (0U << 24) -#define CCR_DMODE_1 (1U << 24) -#define CCR_DMODE_2 (2U << 24) -#define CCR_DMODE_4 (3U << 24) -#define CCR_FMODE_INDW (0U << 26) -#define CCR_FMODE_INDR (1U << 26) -#define CCR_FMODE_APM (2U << 26) -#define CCR_FMODE_MM (3U << 26) - -#define QUADSPI_AR 0x18 -#define QUADSPI_ABR 0x1c -#define QUADSPI_DR 0x20 -#define QUADSPI_PSMKR 0x24 -#define QUADSPI_PSMAR 0x28 -#define QUADSPI_PIR 0x2c -#define QUADSPI_LPTR 0x30 -#define LPTR_DFT_TIMEOUT 0x10 - -#define FSIZE_VAL(size) (__fls(size) - 1) - -#define STM32_MAX_MMAP_SZ SZ_256M -#define STM32_MAX_NORCHIP 2 - -#define STM32_QSPI_FIFO_SZ 32 -#define STM32_QSPI_FIFO_TIMEOUT_US 30000 -#define STM32_QSPI_BUSY_TIMEOUT_US 100000 - -struct stm32_qspi_flash { - struct spi_nor nor; - struct stm32_qspi *qspi; - u32 cs; - u32 fsize; - u32 presc; - u32 read_mode; - bool registered; - u32 prefetch_limit; -}; - -struct stm32_qspi { - struct device *dev; - void __iomem *io_base; - void __iomem *mm_base; - resource_size_t mm_size; - u32 nor_num; - struct clk *clk; - u32 clk_rate; - struct stm32_qspi_flash flash[STM32_MAX_NORCHIP]; - struct completion cmd_completion; - - /* - * to protect device configuration, could be different between - * 2 flash access (bk1, bk2) - */ - struct mutex lock; -}; - -struct stm32_qspi_cmd { - u8 addr_width; - u8 dummy; - bool tx_data; - u8 opcode; - u32 framemode; - u32 qspimode; - u32 addr; - size_t len; - void *buf; -}; - -static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi) -{ - u32 cr; - int err = 0; - - if (readl_relaxed(qspi->io_base + QUADSPI_SR) & SR_TCF) - return 0; - - reinit_completion(&qspi->cmd_completion); - cr = readl_relaxed(qspi->io_base + QUADSPI_CR); - writel_relaxed(cr | CR_TCIE, qspi->io_base + QUADSPI_CR); - - if (!wait_for_completion_interruptible_timeout(&qspi->cmd_completion, - msecs_to_jiffies(1000))) - err = -ETIMEDOUT; - - writel_relaxed(cr, qspi->io_base + QUADSPI_CR); - return err; -} - -static int stm32_qspi_wait_nobusy(struct stm32_qspi *qspi) -{ - u32 sr; - - return readl_relaxed_poll_timeout(qspi->io_base + QUADSPI_SR, sr, - !(sr & SR_BUSY), 10, - STM32_QSPI_BUSY_TIMEOUT_US); -} - -static void stm32_qspi_set_framemode(struct spi_nor *nor, - struct stm32_qspi_cmd *cmd, bool read) -{ - u32 dmode = CCR_DMODE_1; - - cmd->framemode = CCR_IMODE_1; - - if (read) { - switch (nor->read_proto) { - default: - case SNOR_PROTO_1_1_1: - dmode = CCR_DMODE_1; - break; - case SNOR_PROTO_1_1_2: - dmode = CCR_DMODE_2; - break; - case SNOR_PROTO_1_1_4: - dmode = CCR_DMODE_4; - break; - } - } - - cmd->framemode |= cmd->tx_data ? dmode : 0; - cmd->framemode |= cmd->addr_width ? CCR_ADMODE_1 : 0; -} - -static void stm32_qspi_read_fifo(u8 *val, void __iomem *addr) -{ - *val = readb_relaxed(addr); -} - -static void stm32_qspi_write_fifo(u8 *val, void __iomem *addr) -{ - writeb_relaxed(*val, addr); -} - -static int stm32_qspi_tx_poll(struct stm32_qspi *qspi, - const struct stm32_qspi_cmd *cmd) -{ - void (*tx_fifo)(u8 *, void __iomem *); - u32 len = cmd->len, sr; - u8 *buf = cmd->buf; - int ret; - - if (cmd->qspimode == CCR_FMODE_INDW) - tx_fifo = stm32_qspi_write_fifo; - else - tx_fifo = stm32_qspi_read_fifo; - - while (len--) { - ret = readl_relaxed_poll_timeout(qspi->io_base + QUADSPI_SR, - sr, (sr & SR_FTF), 10, - STM32_QSPI_FIFO_TIMEOUT_US); - if (ret) { - dev_err(qspi->dev, "fifo timeout (stat:%#x)\n", sr); - return ret; - } - tx_fifo(buf++, qspi->io_base + QUADSPI_DR); - } - - return 0; -} - -static int stm32_qspi_tx_mm(struct stm32_qspi *qspi, - const struct stm32_qspi_cmd *cmd) -{ - memcpy_fromio(cmd->buf, qspi->mm_base + cmd->addr, cmd->len); - return 0; -} - -static int stm32_qspi_tx(struct stm32_qspi *qspi, - const struct stm32_qspi_cmd *cmd) -{ - if (!cmd->tx_data) - return 0; - - if (cmd->qspimode == CCR_FMODE_MM) - return stm32_qspi_tx_mm(qspi, cmd); - - return stm32_qspi_tx_poll(qspi, cmd); -} - -static int stm32_qspi_send(struct stm32_qspi_flash *flash, - const struct stm32_qspi_cmd *cmd) -{ - struct stm32_qspi *qspi = flash->qspi; - u32 ccr, dcr, cr; - u32 last_byte; - int err; - - err = stm32_qspi_wait_nobusy(qspi); - if (err) - goto abort; - - dcr = readl_relaxed(qspi->io_base + QUADSPI_DCR) & ~DCR_FSIZE_MASK; - dcr |= DCR_FSIZE(flash->fsize); - writel_relaxed(dcr, qspi->io_base + QUADSPI_DCR); - - cr = readl_relaxed(qspi->io_base + QUADSPI_CR); - cr &= ~CR_PRESC_MASK & ~CR_FSEL; - cr |= CR_PRESC(flash->presc); - cr |= flash->cs ? CR_FSEL : 0; - writel_relaxed(cr, qspi->io_base + QUADSPI_CR); - - if (cmd->tx_data) - writel_relaxed(cmd->len - 1, qspi->io_base + QUADSPI_DLR); - - ccr = cmd->framemode | cmd->qspimode; - - if (cmd->dummy) - ccr |= CCR_DCYC(cmd->dummy); - - if (cmd->addr_width) - ccr |= CCR_ADSIZE(cmd->addr_width - 1); - - ccr |= CCR_INST(cmd->opcode); - writel_relaxed(ccr, qspi->io_base + QUADSPI_CCR); - - if (cmd->addr_width && cmd->qspimode != CCR_FMODE_MM) - writel_relaxed(cmd->addr, qspi->io_base + QUADSPI_AR); - - err = stm32_qspi_tx(qspi, cmd); - if (err) - goto abort; - - if (cmd->qspimode != CCR_FMODE_MM) { - err = stm32_qspi_wait_cmd(qspi); - if (err) - goto abort; - writel_relaxed(FCR_CTCF, qspi->io_base + QUADSPI_FCR); - } else { - last_byte = cmd->addr + cmd->len; - if (last_byte > flash->prefetch_limit) - goto abort; - } - - return err; - -abort: - cr = readl_relaxed(qspi->io_base + QUADSPI_CR) | CR_ABORT; - writel_relaxed(cr, qspi->io_base + QUADSPI_CR); - - if (err) - dev_err(qspi->dev, "%s abort err:%d\n", __func__, err); - - return err; -} - -static int stm32_qspi_read_reg(struct spi_nor *nor, - u8 opcode, u8 *buf, int len) -{ - struct stm32_qspi_flash *flash = nor->priv; - struct device *dev = flash->qspi->dev; - struct stm32_qspi_cmd cmd; - - dev_dbg(dev, "read_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); - - memset(&cmd, 0, sizeof(cmd)); - cmd.opcode = opcode; - cmd.tx_data = true; - cmd.len = len; - cmd.buf = buf; - cmd.qspimode = CCR_FMODE_INDR; - - stm32_qspi_set_framemode(nor, &cmd, false); - - return stm32_qspi_send(flash, &cmd); -} - -static int stm32_qspi_write_reg(struct spi_nor *nor, u8 opcode, - u8 *buf, int len) -{ - struct stm32_qspi_flash *flash = nor->priv; - struct device *dev = flash->qspi->dev; - struct stm32_qspi_cmd cmd; - - dev_dbg(dev, "write_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len); - - memset(&cmd, 0, sizeof(cmd)); - cmd.opcode = opcode; - cmd.tx_data = !!(buf && len > 0); - cmd.len = len; - cmd.buf = buf; - cmd.qspimode = CCR_FMODE_INDW; - - stm32_qspi_set_framemode(nor, &cmd, false); - - return stm32_qspi_send(flash, &cmd); -} - -static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len, - u_char *buf) -{ - struct stm32_qspi_flash *flash = nor->priv; - struct stm32_qspi *qspi = flash->qspi; - struct stm32_qspi_cmd cmd; - int err; - - dev_dbg(qspi->dev, "read(%#.2x): buf:%pK from:%#.8x len:%#zx\n", - nor->read_opcode, buf, (u32)from, len); - - memset(&cmd, 0, sizeof(cmd)); - cmd.opcode = nor->read_opcode; - cmd.addr_width = nor->addr_width; - cmd.addr = (u32)from; - cmd.tx_data = true; - cmd.dummy = nor->read_dummy; - cmd.len = len; - cmd.buf = buf; - cmd.qspimode = flash->read_mode; - - stm32_qspi_set_framemode(nor, &cmd, true); - err = stm32_qspi_send(flash, &cmd); - - return err ? err : len; -} - -static ssize_t stm32_qspi_write(struct spi_nor *nor, loff_t to, size_t len, - const u_char *buf) -{ - struct stm32_qspi_flash *flash = nor->priv; - struct device *dev = flash->qspi->dev; - struct stm32_qspi_cmd cmd; - int err; - - dev_dbg(dev, "write(%#.2x): buf:%p to:%#.8x len:%#zx\n", - nor->program_opcode, buf, (u32)to, len); - - memset(&cmd, 0, sizeof(cmd)); - cmd.opcode = nor->program_opcode; - cmd.addr_width = nor->addr_width; - cmd.addr = (u32)to; - cmd.tx_data = true; - cmd.len = len; - cmd.buf = (void *)buf; - cmd.qspimode = CCR_FMODE_INDW; - - stm32_qspi_set_framemode(nor, &cmd, false); - err = stm32_qspi_send(flash, &cmd); - - return err ? err : len; -} - -static int stm32_qspi_erase(struct spi_nor *nor, loff_t offs) -{ - struct stm32_qspi_flash *flash = nor->priv; - struct device *dev = flash->qspi->dev; - struct stm32_qspi_cmd cmd; - - dev_dbg(dev, "erase(%#.2x):offs:%#x\n", nor->erase_opcode, (u32)offs); - - memset(&cmd, 0, sizeof(cmd)); - cmd.opcode = nor->erase_opcode; - cmd.addr_width = nor->addr_width; - cmd.addr = (u32)offs; - cmd.qspimode = CCR_FMODE_INDW; - - stm32_qspi_set_framemode(nor, &cmd, false); - - return stm32_qspi_send(flash, &cmd); -} - -static irqreturn_t stm32_qspi_irq(int irq, void *dev_id) -{ - struct stm32_qspi *qspi = (struct stm32_qspi *)dev_id; - u32 cr, sr, fcr = 0; - - cr = readl_relaxed(qspi->io_base + QUADSPI_CR); - sr = readl_relaxed(qspi->io_base + QUADSPI_SR); - - if ((cr & CR_TCIE) && (sr & SR_TCF)) { - /* tx complete */ - fcr |= FCR_CTCF; - complete(&qspi->cmd_completion); - } else { - dev_info_ratelimited(qspi->dev, "spurious interrupt\n"); - } - - writel_relaxed(fcr, qspi->io_base + QUADSPI_FCR); - - return IRQ_HANDLED; -} - -static int stm32_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) -{ - struct stm32_qspi_flash *flash = nor->priv; - struct stm32_qspi *qspi = flash->qspi; - - mutex_lock(&qspi->lock); - return 0; -} - -static void stm32_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) -{ - struct stm32_qspi_flash *flash = nor->priv; - struct stm32_qspi *qspi = flash->qspi; - - mutex_unlock(&qspi->lock); -} - -static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, - struct device_node *np) -{ - struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ | - SNOR_HWCAPS_READ_FAST | - SNOR_HWCAPS_PP, - }; - u32 width, presc, cs_num, max_rate = 0; - struct stm32_qspi_flash *flash; - struct mtd_info *mtd; - int ret; - - of_property_read_u32(np, "reg", &cs_num); - if (cs_num >= STM32_MAX_NORCHIP) - return -EINVAL; - - of_property_read_u32(np, "spi-max-frequency", &max_rate); - if (!max_rate) - return -EINVAL; - - presc = DIV_ROUND_UP(qspi->clk_rate, max_rate) - 1; - - if (of_property_read_u32(np, "spi-rx-bus-width", &width)) - width = 1; - - if (width == 4) - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; - else if (width == 2) - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; - else if (width != 1) - return -EINVAL; - - flash = &qspi->flash[cs_num]; - flash->qspi = qspi; - flash->cs = cs_num; - flash->presc = presc; - - flash->nor.dev = qspi->dev; - spi_nor_set_flash_node(&flash->nor, np); - flash->nor.priv = flash; - mtd = &flash->nor.mtd; - - flash->nor.read = stm32_qspi_read; - flash->nor.write = stm32_qspi_write; - flash->nor.erase = stm32_qspi_erase; - flash->nor.read_reg = stm32_qspi_read_reg; - flash->nor.write_reg = stm32_qspi_write_reg; - flash->nor.prepare = stm32_qspi_prep; - flash->nor.unprepare = stm32_qspi_unprep; - - writel_relaxed(LPTR_DFT_TIMEOUT, qspi->io_base + QUADSPI_LPTR); - - writel_relaxed(CR_PRESC(presc) | CR_FTHRES(3) | CR_TCEN | CR_SSHIFT - | CR_EN, qspi->io_base + QUADSPI_CR); - - /* - * in stm32 qspi controller, QUADSPI_DCR register has a fsize field - * which define the size of nor flash. - * if fsize is NULL, the controller can't sent spi-nor command. - * set a temporary value just to discover the nor flash with - * "spi_nor_scan". After, the right value (mtd->size) can be set. - */ - flash->fsize = FSIZE_VAL(SZ_1K); - - ret = spi_nor_scan(&flash->nor, NULL, &hwcaps); - if (ret) { - dev_err(qspi->dev, "device scan failed\n"); - return ret; - } - - flash->fsize = FSIZE_VAL(mtd->size); - flash->prefetch_limit = mtd->size - STM32_QSPI_FIFO_SZ; - - flash->read_mode = CCR_FMODE_MM; - if (mtd->size > qspi->mm_size) - flash->read_mode = CCR_FMODE_INDR; - - writel_relaxed(DCR_CSHT(1), qspi->io_base + QUADSPI_DCR); - - ret = mtd_device_register(mtd, NULL, 0); - if (ret) { - dev_err(qspi->dev, "mtd device parse failed\n"); - return ret; - } - - flash->registered = true; - - dev_dbg(qspi->dev, "read mm:%s cs:%d bus:%d\n", - flash->read_mode == CCR_FMODE_MM ? "yes" : "no", cs_num, width); - - return 0; -} - -static void stm32_qspi_mtd_free(struct stm32_qspi *qspi) -{ - int i; - - for (i = 0; i < STM32_MAX_NORCHIP; i++) - if (qspi->flash[i].registered) - mtd_device_unregister(&qspi->flash[i].nor.mtd); -} - -static int stm32_qspi_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *flash_np; - struct reset_control *rstc; - struct stm32_qspi *qspi; - struct resource *res; - int ret, irq; - - qspi = devm_kzalloc(dev, sizeof(*qspi), GFP_KERNEL); - if (!qspi) - return -ENOMEM; - - qspi->nor_num = of_get_child_count(dev->of_node); - if (!qspi->nor_num || qspi->nor_num > STM32_MAX_NORCHIP) - return -ENODEV; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi"); - qspi->io_base = devm_ioremap_resource(dev, res); - if (IS_ERR(qspi->io_base)) - return PTR_ERR(qspi->io_base); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm"); - qspi->mm_base = devm_ioremap_resource(dev, res); - if (IS_ERR(qspi->mm_base)) - return PTR_ERR(qspi->mm_base); - - qspi->mm_size = resource_size(res); - - irq = platform_get_irq(pdev, 0); - ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0, - dev_name(dev), qspi); - if (ret) { - dev_err(dev, "failed to request irq\n"); - return ret; - } - - init_completion(&qspi->cmd_completion); - - qspi->clk = devm_clk_get(dev, NULL); - if (IS_ERR(qspi->clk)) - return PTR_ERR(qspi->clk); - - qspi->clk_rate = clk_get_rate(qspi->clk); - if (!qspi->clk_rate) - return -EINVAL; - - ret = clk_prepare_enable(qspi->clk); - if (ret) { - dev_err(dev, "can not enable the clock\n"); - return ret; - } - - rstc = devm_reset_control_get_exclusive(dev, NULL); - if (!IS_ERR(rstc)) { - reset_control_assert(rstc); - udelay(2); - reset_control_deassert(rstc); - } - - qspi->dev = dev; - platform_set_drvdata(pdev, qspi); - mutex_init(&qspi->lock); - - for_each_available_child_of_node(dev->of_node, flash_np) { - ret = stm32_qspi_flash_setup(qspi, flash_np); - if (ret) { - dev_err(dev, "unable to setup flash chip\n"); - goto err_flash; - } - } - - return 0; - -err_flash: - mutex_destroy(&qspi->lock); - stm32_qspi_mtd_free(qspi); - - clk_disable_unprepare(qspi->clk); - return ret; -} - -static int stm32_qspi_remove(struct platform_device *pdev) -{ - struct stm32_qspi *qspi = platform_get_drvdata(pdev); - - /* disable qspi */ - writel_relaxed(0, qspi->io_base + QUADSPI_CR); - - stm32_qspi_mtd_free(qspi); - mutex_destroy(&qspi->lock); - - clk_disable_unprepare(qspi->clk); - return 0; -} - -static const struct of_device_id stm32_qspi_match[] = { - {.compatible = "st,stm32f469-qspi"}, - {} -}; -MODULE_DEVICE_TABLE(of, stm32_qspi_match); - -static struct platform_driver stm32_qspi_driver = { - .probe = stm32_qspi_probe, - .remove = stm32_qspi_remove, - .driver = { - .name = "stm32-quadspi", - .of_match_table = stm32_qspi_match, - }, -}; -module_platform_driver(stm32_qspi_driver); - -MODULE_AUTHOR("Ludovic Barre <ludovic.barre@st.com>"); -MODULE_DESCRIPTION("STMicroelectronics STM32 quad spi driver"); -MODULE_LICENSE("GPL v2"); diff --git a/include/linux/dma/mxs-dma.h b/include/linux/dma/mxs-dma.h new file mode 100644 index 000000000000..069d9f5a609e --- /dev/null +++ b/include/linux/dma/mxs-dma.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MXS_DMA_H_ +#define _MXS_DMA_H_ + +#include <linux/dmaengine.h> + +#define MXS_DMA_CTRL_WAIT4END BIT(31) +#define MXS_DMA_CTRL_WAIT4RDY BIT(30) + +/* + * The mxs dmaengine can do PIO transfers. We pass a pointer to the PIO words + * in the second argument to dmaengine_prep_slave_sg when the direction is + * set to DMA_TRANS_NONE. To make this clear and to prevent users from doing + * the error prone casting we have this wrapper function + */ +static inline struct dma_async_tx_descriptor *mxs_dmaengine_prep_pio( + struct dma_chan *chan, u32 *pio, unsigned int npio, + enum dma_transfer_direction dir, unsigned long flags) +{ + return dmaengine_prep_slave_sg(chan, (struct scatterlist *)pio, npio, + dir, flags); +} + +#endif /* _MXS_DMA_H_ */ diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 208c87cf2e3e..c98a21108688 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -219,6 +219,13 @@ struct cfi_pri_amdstd { uint8_t VppMin; uint8_t VppMax; uint8_t TopBottom; + /* Below field are added from version 1.5 */ + uint8_t ProgramSuspend; + uint8_t UnlockBypass; + uint8_t SecureSiliconSector; + uint8_t SoftwareFeatures; +#define CFI_POLL_STATUS_REG BIT(0) +#define CFI_POLL_DQ BIT(1) } __packed; /* Vendor-Specific PRI for Atmel chips (command set 0x0002) */ diff --git a/include/linux/mtd/hyperbus.h b/include/linux/mtd/hyperbus.h new file mode 100644 index 000000000000..2dfe65964f6e --- /dev/null +++ b/include/linux/mtd/hyperbus.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#ifndef __LINUX_MTD_HYPERBUS_H__ +#define __LINUX_MTD_HYPERBUS_H__ + +#include <linux/mtd/map.h> + +enum hyperbus_memtype { + HYPERFLASH, + HYPERRAM, +}; + +/** + * struct hyperbus_device - struct representing HyperBus slave device + * @map: map_info struct for accessing MMIO HyperBus flash memory + * @np: pointer to HyperBus slave device node + * @mtd: pointer to MTD struct + * @ctlr: pointer to HyperBus controller struct + * @memtype: type of memory device: HyperFlash or HyperRAM + */ + +struct hyperbus_device { + struct map_info map; + struct device_node *np; + struct mtd_info *mtd; + struct hyperbus_ctlr *ctlr; + enum hyperbus_memtype memtype; +}; + +/** + * struct hyperbus_ops - struct representing custom HyperBus operations + * @read16: read 16 bit of data from flash in a single burst. Used to read + * from non default address space, such as ID/CFI space + * @write16: write 16 bit of data to flash in a single burst. Used to + * send cmd to flash or write single 16 bit word at a time. + * @copy_from: copy data from flash memory + * @copy_to: copy data to flash memory + * @calibrate: calibrate HyperBus controller + */ + +struct hyperbus_ops { + u16 (*read16)(struct hyperbus_device *hbdev, unsigned long addr); + void (*write16)(struct hyperbus_device *hbdev, + unsigned long addr, u16 val); + void (*copy_from)(struct hyperbus_device *hbdev, void *to, + unsigned long from, ssize_t len); + void (*copy_to)(struct hyperbus_device *dev, unsigned long to, + const void *from, ssize_t len); + int (*calibrate)(struct hyperbus_device *dev); +}; + +/** + * struct hyperbus_ctlr - struct representing HyperBus controller + * @dev: pointer to HyperBus controller device + * @calibrated: flag to indicate ctlr calibration sequence is complete + * @ops: HyperBus controller ops + */ +struct hyperbus_ctlr { + struct device *dev; + bool calibrated; + + const struct hyperbus_ops *ops; +}; + +/** + * hyperbus_register_device - probe and register a HyperBus slave memory device + * @hbdev: hyperbus_device struct with dev, np and ctlr field populated + * + * Return: 0 for success, others for failure. + */ +int hyperbus_register_device(struct hyperbus_device *hbdev); + +/** + * hyperbus_unregister_device - deregister HyperBus slave memory device + * @hbdev: hyperbus_device to be unregistered + * + * Return: 0 for success, others for failure. + */ +int hyperbus_unregister_device(struct hyperbus_device *hbdev); + +#endif /* __LINUX_MTD_HYPERBUS_H__ */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 936a3fdb48b5..4ca8c1c845fb 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -316,6 +316,12 @@ struct mtd_info { int (*_get_device) (struct mtd_info *mtd); void (*_put_device) (struct mtd_info *mtd); + /* + * flag indicates a panic write, low level drivers can take appropriate + * action if required to ensure writes go through + */ + bool oops_panic_write; + struct notifier_block reboot_notifier; /* default mode before reboot */ /* ECC status information */ diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 2d12a1b18742..5f728407a579 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -77,6 +77,7 @@ #define ONENAND_DEVICE_DENSITY_1Gb (0x003) #define ONENAND_DEVICE_DENSITY_2Gb (0x004) #define ONENAND_DEVICE_DENSITY_4Gb (0x005) +#define ONENAND_DEVICE_DENSITY_8Gb (0x006) /* * Version ID Register F002h (R) diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index ac3884a28dea..4ab9bccfcde0 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -874,6 +874,42 @@ int nand_op_parser_exec_op(struct nand_chip *chip, const struct nand_op_parser *parser, const struct nand_operation *op, bool check_only); +static inline void nand_op_trace(const char *prefix, + const struct nand_op_instr *instr) +{ +#if IS_ENABLED(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG) + switch (instr->type) { + case NAND_OP_CMD_INSTR: + pr_debug("%sCMD [0x%02x]\n", prefix, + instr->ctx.cmd.opcode); + break; + case NAND_OP_ADDR_INSTR: + pr_debug("%sADDR [%d cyc: %*ph]\n", prefix, + instr->ctx.addr.naddrs, + instr->ctx.addr.naddrs < 64 ? + instr->ctx.addr.naddrs : 64, + instr->ctx.addr.addrs); + break; + case NAND_OP_DATA_IN_INSTR: + pr_debug("%sDATA_IN [%d B%s]\n", prefix, + instr->ctx.data.len, + instr->ctx.data.force_8bit ? + ", force 8-bit" : ""); + break; + case NAND_OP_DATA_OUT_INSTR: + pr_debug("%sDATA_OUT [%d B%s]\n", prefix, + instr->ctx.data.len, + instr->ctx.data.force_8bit ? + ", force 8-bit" : ""); + break; + case NAND_OP_WAITRDY_INSTR: + pr_debug("%sWAITRDY [max %d ms]\n", prefix, + instr->ctx.waitrdy.timeout_ms); + break; + } +#endif +} + /** * struct nand_controller_ops - Controller operations * diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index 507f7e289bd1..4ea558bd3c46 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -68,30 +68,60 @@ SPI_MEM_OP_DUMMY(ndummy, 1), \ SPI_MEM_OP_DATA_IN(len, buf, 1)) +#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1), \ + SPI_MEM_OP_ADDR(3, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 1)) + #define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \ SPI_MEM_OP_ADDR(2, addr, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ SPI_MEM_OP_DATA_IN(len, buf, 2)) +#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \ + SPI_MEM_OP_ADDR(3, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 2)) + #define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ SPI_MEM_OP_ADDR(2, addr, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ SPI_MEM_OP_DATA_IN(len, buf, 4)) +#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ + SPI_MEM_OP_ADDR(3, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 4)) + #define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \ SPI_MEM_OP_ADDR(2, addr, 2), \ SPI_MEM_OP_DUMMY(ndummy, 2), \ SPI_MEM_OP_DATA_IN(len, buf, 2)) +#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \ + SPI_MEM_OP_ADDR(3, addr, 2), \ + SPI_MEM_OP_DUMMY(ndummy, 2), \ + SPI_MEM_OP_DATA_IN(len, buf, 2)) + #define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \ SPI_MEM_OP_ADDR(2, addr, 4), \ SPI_MEM_OP_DUMMY(ndummy, 4), \ SPI_MEM_OP_DATA_IN(len, buf, 4)) +#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \ + SPI_MEM_OP_ADDR(3, addr, 4), \ + SPI_MEM_OP_DUMMY(ndummy, 4), \ + SPI_MEM_OP_DATA_IN(len, buf, 4)) + #define SPINAND_PROG_EXEC_OP(addr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ @@ -197,6 +227,7 @@ struct spinand_manufacturer { extern const struct spinand_manufacturer gigadevice_spinand_manufacturer; extern const struct spinand_manufacturer macronix_spinand_manufacturer; extern const struct spinand_manufacturer micron_spinand_manufacturer; +extern const struct spinand_manufacturer paragon_spinand_manufacturer; extern const struct spinand_manufacturer toshiba_spinand_manufacturer; extern const struct spinand_manufacturer winbond_spinand_manufacturer; @@ -260,7 +291,7 @@ struct spinand_ecc_info { */ struct spinand_info { const char *model; - u8 devid; + u16 devid; u32 flags; struct nand_memory_organization memorg; struct nand_ecc_req eccreq; @@ -422,7 +453,7 @@ static inline void spinand_set_of_node(struct spinand_device *spinand, int spinand_match_and_init(struct spinand_device *dev, const struct spinand_info *table, - unsigned int table_size, u8 devid); + unsigned int table_size, u16 devid); int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val); int spinand_select_target(struct spinand_device *spinand, unsigned int target); diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h index aff5b5e59845..47ffe3208c27 100644 --- a/include/uapi/mtd/mtd-abi.h +++ b/include/uapi/mtd/mtd-abi.h @@ -113,11 +113,11 @@ struct mtd_write_req { #define MTD_CAP_NVRAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE) /* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */ -#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended) -#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode) -#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme -#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read) -#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default +#define MTD_NANDECC_OFF 0 /* Switch off ECC (Not recommended) */ +#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */ +#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */ +#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */ +#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */ /* OTP mode selection */ #define MTD_OTP_OFF 0 |