1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
/*
* linux/arch/sh/boards/se/770x/irq.c
*
* Copyright (C) 2000 Kazumoto Kojima
* Copyright (C) 2006 Nobuhiro Iwamatsu
*
* Hitachi SolutionEngine Support.
*
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/se.h>
/*
* If the problem of make_ipr_irq is solved,
* this code will become unnecessary. :-)
*/
static void se770x_disable_ipr_irq(unsigned int irq)
{
struct ipr_data *p = get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
}
static void se770x_enable_ipr_irq(unsigned int irq)
{
struct ipr_data *p = get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
}
static struct irq_chip se770x_irq_chip = {
.name = "MS770xSE-FPGA",
.mask = se770x_disable_ipr_irq,
.unmask = se770x_enable_ipr_irq,
.mask_ack = se770x_disable_ipr_irq,
};
void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs)
{
int i;
for (i = 0; i < nr_irqs; i++) {
unsigned int irq = table[i].irq;
disable_irq_nosync(irq);
set_irq_chip_and_handler_name(irq, &se770x_irq_chip,
handle_level_irq, "level");
set_irq_chip_data(irq, &table[i]);
se770x_enable_ipr_irq(irq);
}
}
static struct ipr_data se770x_ipr_map[] = {
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
/* This is default value */
{ 0xf-0x2, 0, 8, 0x2 , BCR_ILCRA},
{ 0xf-0xa, 0, 4, 0xa , BCR_ILCRA},
{ 0xf-0x5, 0, 0, 0x5 , BCR_ILCRB},
{ 0xf-0x8, 0, 4, 0x8 , BCR_ILCRC},
{ 0xf-0xc, 0, 0, 0xc , BCR_ILCRC},
{ 0xf-0xe, 0, 12, 0xe , BCR_ILCRD},
{ 0xf-0x3, 0, 4, 0x3 , BCR_ILCRD}, /* LAN */
{ 0xf-0xd, 0, 8, 0xd , BCR_ILCRE},
{ 0xf-0x9, 0, 4, 0x9 , BCR_ILCRE},
{ 0xf-0x1, 0, 0, 0x1 , BCR_ILCRE},
{ 0xf-0xf, 0, 12, 0xf , BCR_ILCRF},
{ 0xf-0xb, 0, 4, 0xb , BCR_ILCRF},
{ 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG},
{ 0xf-0x6, 0, 8, 0x6 , BCR_ILCRG},
{ 0xf-0x4, 0, 4, 0x4 , BCR_ILCRG},
#else
{ 14, 0, 8, 0x0f-14 ,BCR_ILCRA},
{ 12, 0, 4, 0x0f-12 ,BCR_ILCRA},
{ 8, 0, 4, 0x0f- 8 ,BCR_ILCRB},
{ 6, 0, 12, 0x0f- 6 ,BCR_ILCRC},
{ 5, 0, 8, 0x0f- 5 ,BCR_ILCRC},
{ 4, 0, 4, 0x0f- 4 ,BCR_ILCRC},
{ 3, 0, 0, 0x0f- 3 ,BCR_ILCRC},
{ 1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
/* ST NIC */
{ 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */
/* MRSHPC IRQs setting */
{ 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */
{ 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */
{ 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */
{ 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */
/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
/* NOTE: #2 and #13 are not used on PC */
{ 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */
{ 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */
#endif
};
/*
* Initialize IRQ setting
*/
void __init init_se_IRQ(void)
{
/*
* Super I/O (Just mimic PC):
* 1: keyboard
* 3: serial 0
* 4: serial 1
* 5: printer
* 6: floppy
* 8: rtc
* 12: mouse
* 14: ide0
*/
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
/* Disable all interrupts */
ctrl_outw(0, BCR_ILCRA);
ctrl_outw(0, BCR_ILCRB);
ctrl_outw(0, BCR_ILCRC);
ctrl_outw(0, BCR_ILCRD);
ctrl_outw(0, BCR_ILCRE);
ctrl_outw(0, BCR_ILCRF);
ctrl_outw(0, BCR_ILCRG);
#endif
make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
}
|
