m32r: relocate drivers back out of 8250 dir

Commit 9bef3d4197379a995fa80f81950bbbf8d32e9e8b

	"serial: group all the 8250 related code together"

inadvertently swept up the m32r driver in the move, because
it had comments mentioning 8250 registers within it.  However
these are only there by nature of the driver being based off
the 8250 source code -- the hardware itself does not actually
have any relation to the original 8250 style UARTs.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 0 insertions, 1391 deletions

diff --git a/drivers/tty/serial/8250/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c
deleted file mode 100644
index 94a6792bf97..00000000000
--- a/drivers/tty/serial/8250/m32r_sio.c
+++ /dev/null
@@ -1,1191 +0,0 @@
-/*
- *  m32r_sio.c
- *
- *  Driver for M32R serial ports
- *
- *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *  Based on drivers/serial/8250.c.
- *
- *  Copyright (C) 2001  Russell King.
- *  Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/*
- * A note about mapbase / membase
- *
- *  mapbase is the physical address of the IO port.  Currently, we don't
- *  support this very well, and it may well be dropped from this driver
- *  in future.  As such, mapbase should be NULL.
- *
- *  membase is an 'ioremapped' cookie.  This is compatible with the old
- *  serial.c driver, and is currently the preferred form.
- */
-
-#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/delay.h>
-
-#include <asm/m32r.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define PORT_M32R_BASE	PORT_M32R_SIO
-#define PORT_INDEX(x)	(x - PORT_M32R_BASE + 1)
-#define BAUD_RATE	115200
-
-#include <linux/serial_core.h>
-#include "m32r_sio.h"
-#include "m32r_sio_reg.h"
-
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...)	printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...)	do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...)	printk(fmt)
-#else
-#define DEBUG_INTR(fmt...)	do { } while (0)
-#endif
-
-#define PASS_LIMIT	256
-
-/*
- * We default to IRQ0 for the "no irq" hack.   Some
- * machine types want others as well - they're free
- * to redefine this in their header file.
- */
-#define is_real_interrupt(irq)	((irq) != 0)
-
-#define BASE_BAUD	115200
-
-/* Standard COM flags */
-#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism.   Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
-#if defined(CONFIG_PLAT_USRV)
-
-#define SERIAL_PORT_DFNS						\
-       /* UART  CLK     PORT   IRQ            FLAGS */			\
-	{ 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
-	{ 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
-
-#else /* !CONFIG_PLAT_USRV */
-
-#if defined(CONFIG_SERIAL_M32R_PLDSIO)
-#define SERIAL_PORT_DFNS						\
-	{ 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV,	\
-	  STD_COM_FLAGS }, /* ttyS0 */
-#else
-#define SERIAL_PORT_DFNS						\
-	{ 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R,		\
-	  STD_COM_FLAGS }, /* ttyS0 */
-#endif
-
-#endif /* !CONFIG_PLAT_USRV */
-
-static struct old_serial_port old_serial_port[] = {
-	SERIAL_PORT_DFNS
-};
-
-#define UART_NR	ARRAY_SIZE(old_serial_port)
-
-struct uart_sio_port {
-	struct uart_port	port;
-	struct timer_list	timer;		/* "no irq" timer */
-	struct list_head	list;		/* ports on this IRQ */
-	unsigned short		rev;
-	unsigned char		acr;
-	unsigned char		ier;
-	unsigned char		lcr;
-	unsigned char		mcr_mask;	/* mask of user bits */
-	unsigned char		mcr_force;	/* mask of forced bits */
-	unsigned char		lsr_break_flag;
-
-	/*
-	 * We provide a per-port pm hook.
-	 */
-	void			(*pm)(struct uart_port *port,
-				      unsigned int state, unsigned int old);
-};
-
-struct irq_info {
-	spinlock_t		lock;
-	struct list_head	*head;
-};
-
-static struct irq_info irq_lists[NR_IRQS];
-
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
-	[PORT_UNKNOWN] = {
-		.name			= "unknown",
-		.dfl_xmit_fifo_size	= 1,
-		.flags			= 0,
-	},
-	[PORT_INDEX(PORT_M32R_SIO)] = {
-		.name			= "M32RSIO",
-		.dfl_xmit_fifo_size	= 1,
-		.flags			= 0,
-	},
-};
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define __sio_in(x) inw((unsigned long)(x))
-#define __sio_out(v,x) outw((v),(unsigned long)(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
-	unsigned short sbaud;
-	sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
-	__sio_out(sbaud, PLD_ESIO0BAUR);
-}
-
-static void sio_reset(void)
-{
-	unsigned short tmp;
-
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0CR);
-	sio_set_baud_rate(BAUD_RATE);
-	__sio_out(0x0300, PLD_ESIO0CR);
-	__sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_init(void)
-{
-	unsigned short tmp;
-
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0CR);
-	__sio_out(0x0300, PLD_ESIO0CR);
-	__sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_error(int *status)
-{
-	printk("SIO0 error[%04x]\n", *status);
-	do {
-		sio_init();
-	} while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
-}
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define __sio_in(x) inl(x)
-#define __sio_out(v,x) outl((v),(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
-	unsigned long i, j;
-
-	i = boot_cpu_data.bus_clock / (baud * 16);
-	j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
-	i -= 1;
-	j = (j + 1) >> 1;
-
-	__sio_out(i, M32R_SIO0_BAUR_PORTL);
-	__sio_out(j, M32R_SIO0_RBAUR_PORTL);
-}
-
-static void sio_reset(void)
-{
-	__sio_out(0x00000300, M32R_SIO0_CR_PORTL);	/* init status */
-	__sio_out(0x00000800, M32R_SIO0_MOD1_PORTL);	/* 8bit        */
-	__sio_out(0x00000080, M32R_SIO0_MOD0_PORTL);	/* 1stop non   */
-	sio_set_baud_rate(BAUD_RATE);
-	__sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
-	__sio_out(0x00000003, M32R_SIO0_CR_PORTL);	/* RXCEN */
-}
-
-static void sio_init(void)
-{
-	unsigned int tmp;
-
-	tmp = __sio_in(M32R_SIO0_RXB_PORTL);
-	tmp = __sio_in(M32R_SIO0_RXB_PORTL);
-	tmp = __sio_in(M32R_SIO0_STS_PORTL);
-	__sio_out(0x00000003, M32R_SIO0_CR_PORTL);
-}
-
-static void sio_error(int *status)
-{
-	printk("SIO0 error[%04x]\n", *status);
-	do {
-		sio_init();
-	} while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
-}
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-static unsigned int sio_in(struct uart_sio_port *up, int offset)
-{
-	return __sio_in(up->port.iobase + offset);
-}
-
-static void sio_out(struct uart_sio_port *up, int offset, int value)
-{
-	__sio_out(value, up->port.iobase + offset);
-}
-
-static unsigned int serial_in(struct uart_sio_port *up, int offset)
-{
-	if (!offset)
-		return 0;
-
-	return __sio_in(offset);
-}
-
-static void serial_out(struct uart_sio_port *up, int offset, int value)
-{
-	if (!offset)
-		return;
-
-	__sio_out(value, offset);
-}
-
-static void m32r_sio_stop_tx(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-
-	if (up->ier & UART_IER_THRI) {
-		up->ier &= ~UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-}
-
-static void m32r_sio_start_tx(struct uart_port *port)
-{
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	struct circ_buf *xmit = &up->port.state->xmit;
-
-	if (!(up->ier & UART_IER_THRI)) {
-		up->ier |= UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		up->port.icount.tx++;
-	}
-	while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
-#else
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-
-	if (!(up->ier & UART_IER_THRI)) {
-		up->ier |= UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-#endif
-}
-
-static void m32r_sio_stop_rx(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-
-	up->ier &= ~UART_IER_RLSI;
-	up->port.read_status_mask &= ~UART_LSR_DR;
-	serial_out(up, UART_IER, up->ier);
-}
-
-static void m32r_sio_enable_ms(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-
-	up->ier |= UART_IER_MSI;
-	serial_out(up, UART_IER, up->ier);
-}
-
-static void receive_chars(struct uart_sio_port *up, int *status)
-{
-	struct tty_struct *tty = up->port.state->port.tty;
-	unsigned char ch;
-	unsigned char flag;
-	int max_count = 256;
-
-	do {
-		ch = sio_in(up, SIORXB);
-		flag = TTY_NORMAL;
-		up->port.icount.rx++;
-
-		if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
-				       UART_LSR_FE | UART_LSR_OE))) {
-			/*
-			 * For statistics only
-			 */
-			if (*status & UART_LSR_BI) {
-				*status &= ~(UART_LSR_FE | UART_LSR_PE);
-				up->port.icount.brk++;
-				/*
-				 * We do the SysRQ and SAK checking
-				 * here because otherwise the break
-				 * may get masked by ignore_status_mask
-				 * or read_status_mask.
-				 */
-				if (uart_handle_break(&up->port))
-					goto ignore_char;
-			} else if (*status & UART_LSR_PE)
-				up->port.icount.parity++;
-			else if (*status & UART_LSR_FE)
-				up->port.icount.frame++;
-			if (*status & UART_LSR_OE)
-				up->port.icount.overrun++;
-
-			/*
-			 * Mask off conditions which should be ingored.
-			 */
-			*status &= up->port.read_status_mask;
-
-			if (up->port.line == up->port.cons->index) {
-				/* Recover the break flag from console xmit */
-				*status |= up->lsr_break_flag;
-				up->lsr_break_flag = 0;
-			}
-
-			if (*status & UART_LSR_BI) {
-				DEBUG_INTR("handling break....");
-				flag = TTY_BREAK;
-			} else if (*status & UART_LSR_PE)
-				flag = TTY_PARITY;
-			else if (*status & UART_LSR_FE)
-				flag = TTY_FRAME;
-		}
-		if (uart_handle_sysrq_char(&up->port, ch))
-			goto ignore_char;
-		if ((*status & up->port.ignore_status_mask) == 0)
-			tty_insert_flip_char(tty, ch, flag);
-
-		if (*status & UART_LSR_OE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character.
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
-	ignore_char:
-		*status = serial_in(up, UART_LSR);
-	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
-	tty_flip_buffer_push(tty);
-}
-
-static void transmit_chars(struct uart_sio_port *up)
-{
-	struct circ_buf *xmit = &up->port.state->xmit;
-	int count;
-
-	if (up->port.x_char) {
-#ifndef CONFIG_SERIAL_M32R_PLDSIO	/* XXX */
-		serial_out(up, UART_TX, up->port.x_char);
-#endif
-		up->port.icount.tx++;
-		up->port.x_char = 0;
-		return;
-	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-		m32r_sio_stop_tx(&up->port);
-		return;
-	}
-
-	count = up->port.fifosize;
-	do {
-		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		up->port.icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-		while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
-
-	} while (--count > 0);
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&up->port);
-
-	DEBUG_INTR("THRE...");
-
-	if (uart_circ_empty(xmit))
-		m32r_sio_stop_tx(&up->port);
-}
-
-/*
- * This handles the interrupt from one port.
- */
-static inline void m32r_sio_handle_port(struct uart_sio_port *up,
-	unsigned int status)
-{
-	DEBUG_INTR("status = %x...", status);
-
-	if (status & 0x04)
-		receive_chars(up, &status);
-	if (status & 0x01)
-		transmit_chars(up);
-}
-
-/*
- * This is the serial driver's interrupt routine.
- *
- * Arjan thinks the old way was overly complex, so it got simplified.
- * Alan disagrees, saying that need the complexity to handle the weird
- * nature of ISA shared interrupts.  (This is a special exception.)
- *
- * In order to handle ISA shared interrupts properly, we need to check
- * that all ports have been serviced, and therefore the ISA interrupt
- * line has been de-asserted.
- *
- * This means we need to loop through all ports. checking that they
- * don't have an interrupt pending.
- */
-static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
-{
-	struct irq_info *i = dev_id;
-	struct list_head *l, *end = NULL;
-	int pass_counter = 0;
-
-	DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-//	if (irq == PLD_IRQ_SIO0_SND)
-//		irq = PLD_IRQ_SIO0_RCV;
-#else
-	if (irq == M32R_IRQ_SIO0_S)
-		irq = M32R_IRQ_SIO0_R;
-#endif
-
-	spin_lock(&i->lock);
-
-	l = i->head;
-	do {
-		struct uart_sio_port *up;
-		unsigned int sts;
-
-		up = list_entry(l, struct uart_sio_port, list);
-
-		sts = sio_in(up, SIOSTS);
-		if (sts & 0x5) {
-			spin_lock(&up->port.lock);
-			m32r_sio_handle_port(up, sts);
-			spin_unlock(&up->port.lock);
-
-			end = NULL;
-		} else if (end == NULL)
-			end = l;
-
-		l = l->next;
-
-		if (l == i->head && pass_counter++ > PASS_LIMIT) {
-			if (sts & 0xe0)
-				sio_error(&sts);
-			break;
-		}
-	} while (l != end);
-
-	spin_unlock(&i->lock);
-
-	DEBUG_INTR("end.\n");
-
-	return IRQ_HANDLED;
-}
-
-/*
- * To support ISA shared interrupts, we need to have one interrupt
- * handler that ensures that the IRQ line has been deasserted
- * before returning.  Failing to do this will result in the IRQ
- * line being stuck active, and, since ISA irqs are edge triggered,
- * no more IRQs will be seen.
- */
-static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
-{
-	spin_lock_irq(&i->lock);
-
-	if (!list_empty(i->head)) {
-		if (i->head == &up->list)
-			i->head = i->head->next;
-		list_del(&up->list);
-	} else {
-		BUG_ON(i->head != &up->list);
-		i->head = NULL;
-	}
-
-	spin_unlock_irq(&i->lock);
-}
-
-static int serial_link_irq_chain(struct uart_sio_port *up)
-{
-	struct irq_info *i = irq_lists + up->port.irq;
-	int ret, irq_flags = 0;
-
-	spin_lock_irq(&i->lock);
-
-	if (i->head) {
-		list_add(&up->list, i->head);
-		spin_unlock_irq(&i->lock);
-
-		ret = 0;
-	} else {
-		INIT_LIST_HEAD(&up->list);
-		i->head = &up->list;
-		spin_unlock_irq(&i->lock);
-
-		ret = request_irq(up->port.irq, m32r_sio_interrupt,
-				  irq_flags, "SIO0-RX", i);
-		ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
-				  irq_flags, "SIO0-TX", i);
-		if (ret < 0)
-			serial_do_unlink(i, up);
-	}
-
-	return ret;
-}
-
-static void serial_unlink_irq_chain(struct uart_sio_port *up)
-{
-	struct irq_info *i = irq_lists + up->port.irq;
-
-	BUG_ON(i->head == NULL);
-
-	if (list_empty(i->head)) {
-		free_irq(up->port.irq, i);
-		free_irq(up->port.irq + 1, i);
-	}
-
-	serial_do_unlink(i, up);
-}
-
-/*
- * This function is used to handle ports that do not have an interrupt.
- */
-static void m32r_sio_timeout(unsigned long data)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)data;
-	unsigned int timeout;
-	unsigned int sts;
-
-	sts = sio_in(up, SIOSTS);
-	if (sts & 0x5) {
-		spin_lock(&up->port.lock);
-		m32r_sio_handle_port(up, sts);
-		spin_unlock(&up->port.lock);
-	}
-
-	timeout = up->port.timeout;
-	timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
-	mod_timer(&up->timer, jiffies + timeout);
-}
-
-static unsigned int m32r_sio_tx_empty(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	unsigned long flags;
-	unsigned int ret;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	return ret;
-}
-
-static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
-{
-	return 0;
-}
-
-static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-
-}
-
-static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
-{
-
-}
-
-static int m32r_sio_startup(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	int retval;
-
-	sio_init();
-
-	/*
-	 * If the "interrupt" for this port doesn't correspond with any
-	 * hardware interrupt, we use a timer-based system.  The original
-	 * driver used to do this with IRQ0.
-	 */
-	if (!is_real_interrupt(up->port.irq)) {
-		unsigned int timeout = up->port.timeout;
-
-		timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
-
-		up->timer.data = (unsigned long)up;
-		mod_timer(&up->timer, jiffies + timeout);
-	} else {
-		retval = serial_link_irq_chain(up);
-		if (retval)
-			return retval;
-	}
-
-	/*
-	 * Finally, enable interrupts.  Note: Modem status interrupts
-	 * are set via set_termios(), which will be occurring imminently
-	 * anyway, so we don't enable them here.
-	 * - M32R_SIO: 0x0c
-	 * - M32R_PLDSIO: 0x04
-	 */
-	up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
-	sio_out(up, SIOTRCR, up->ier);
-
-	/*
-	 * And clear the interrupt registers again for luck.
-	 */
-	sio_reset();
-
-	return 0;
-}
-
-static void m32r_sio_shutdown(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-
-	/*
-	 * Disable interrupts from this port
-	 */
-	up->ier = 0;
-	sio_out(up, SIOTRCR, 0);
-
-	/*
-	 * Disable break condition and FIFOs
-	 */
-
-	sio_init();
-
-	if (!is_real_interrupt(up->port.irq))
-		del_timer_sync(&up->timer);
-	else
-		serial_unlink_irq_chain(up);
-}
-
-static unsigned int m32r_sio_get_divisor(struct uart_port *port,
-	unsigned int baud)
-{
-	return uart_get_divisor(port, baud);
-}
-
-static void m32r_sio_set_termios(struct uart_port *port,
-	struct ktermios *termios, struct ktermios *old)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	unsigned char cval = 0;
-	unsigned long flags;
-	unsigned int baud, quot;
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		cval = UART_LCR_WLEN5;
-		break;
-	case CS6:
-		cval = UART_LCR_WLEN6;
-		break;
-	case CS7:
-		cval = UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		cval = UART_LCR_WLEN8;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		cval |= UART_LCR_STOP;
-	if (termios->c_cflag & PARENB)
-		cval |= UART_LCR_PARITY;
-	if (!(termios->c_cflag & PARODD))
-		cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
-	if (termios->c_cflag & CMSPAR)
-		cval |= UART_LCR_SPAR;
-#endif
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
-#else
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-#endif
-	quot = m32r_sio_get_divisor(port, baud);
-
-	/*
-	 * Ok, we're now changing the port state.  Do it with
-	 * interrupts disabled.
-	 */
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	sio_set_baud_rate(baud);
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-	if (termios->c_iflag & INPCK)
-		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		up->port.read_status_mask |= UART_LSR_BI;
-
-	/*
-	 * Characteres to ignore
-	 */
-	up->port.ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
-	if (termios->c_iflag & IGNBRK) {
-		up->port.ignore_status_mask |= UART_LSR_BI;
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns too (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			up->port.ignore_status_mask |= UART_LSR_OE;
-	}
-
-	/*
-	 * ignore all characters if CREAD is not set
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		up->port.ignore_status_mask |= UART_LSR_DR;
-
-	/*
-	 * CTS flow control flag and modem status interrupts
-	 */
-	up->ier &= ~UART_IER_MSI;
-	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
-		up->ier |= UART_IER_MSI;
-
-	serial_out(up, UART_IER, up->ier);
-
-	up->lcr = cval;					/* Save LCR */
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static void m32r_sio_pm(struct uart_port *port, unsigned int state,
-	unsigned int oldstate)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-
-	if (up->pm)
-		up->pm(port, state, oldstate);
-}
-
-/*
- * Resource handling.  This is complicated by the fact that resources
- * depend on the port type.  Maybe we should be claiming the standard
- * 8250 ports, and then trying to get other resources as necessary?
- */
-static int
-m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
-{
-	unsigned int size = 8 << up->port.regshift;
-#ifndef CONFIG_SERIAL_M32R_PLDSIO
-	unsigned long start;
-#endif
-	int ret = 0;
-
-	switch (up->port.iotype) {
-	case UPIO_MEM:
-		if (up->port.mapbase) {
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-			*res = request_mem_region(up->port.mapbase, size, "serial");
-#else
-			start = up->port.mapbase;
-			*res = request_mem_region(start, size, "serial");
-#endif
-			if (!*res)
-				ret = -EBUSY;
-		}
-		break;
-
-	case UPIO_PORT:
-		*res = request_region(up->port.iobase, size, "serial");
-		if (!*res)
-			ret = -EBUSY;
-		break;
-	}
-	return ret;
-}
-
-static void m32r_sio_release_port(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	unsigned long start, offset = 0, size = 0;
-
-	size <<= up->port.regshift;
-
-	switch (up->port.iotype) {
-	case UPIO_MEM:
-		if (up->port.mapbase) {
-			/*
-			 * Unmap the area.
-			 */
-			iounmap(up->port.membase);
-			up->port.membase = NULL;
-
-			start = up->port.mapbase;
-
-			if (size)
-				release_mem_region(start + offset, size);
-			release_mem_region(start, 8 << up->port.regshift);
-		}
-		break;
-
-	case UPIO_PORT:
-		start = up->port.iobase;
-
-		if (size)
-			release_region(start + offset, size);
-		release_region(start + offset, 8 << up->port.regshift);
-		break;
-
-	default:
-		break;
-	}
-}
-
-static int m32r_sio_request_port(struct uart_port *port)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	struct resource *res = NULL;
-	int ret = 0;
-
-	ret = m32r_sio_request_std_resource(up, &res);
-
-	/*
-	 * If we have a mapbase, then request that as well.
-	 */
-	if (ret == 0 && up->port.flags & UPF_IOREMAP) {
-		int size = resource_size(res);
-
-		up->port.membase = ioremap(up->port.mapbase, size);
-		if (!up->port.membase)
-			ret = -ENOMEM;
-	}
-
-	if (ret < 0) {
-		if (res)
-			release_resource(res);
-	}
-
-	return ret;
-}
-
-static void m32r_sio_config_port(struct uart_port *port, int unused)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	unsigned long flags;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
-	up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
-
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static int
-m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	if (ser->irq >= nr_irqs || ser->irq < 0 ||
-	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
-	    ser->type >= ARRAY_SIZE(uart_config))
-		return -EINVAL;
-	return 0;
-}
-
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
-	int type = port->type;
-
-	if (type >= ARRAY_SIZE(uart_config))
-		type = 0;
-	return uart_config[type].name;
-}
-
-static struct uart_ops m32r_sio_pops = {
-	.tx_empty	= m32r_sio_tx_empty,
-	.set_mctrl	= m32r_sio_set_mctrl,
-	.get_mctrl	= m32r_sio_get_mctrl,
-	.stop_tx	= m32r_sio_stop_tx,
-	.start_tx	= m32r_sio_start_tx,
-	.stop_rx	= m32r_sio_stop_rx,
-	.enable_ms	= m32r_sio_enable_ms,
-	.break_ctl	= m32r_sio_break_ctl,
-	.startup	= m32r_sio_startup,
-	.shutdown	= m32r_sio_shutdown,
-	.set_termios	= m32r_sio_set_termios,
-	.pm		= m32r_sio_pm,
-	.type		= m32r_sio_type,
-	.release_port	= m32r_sio_release_port,
-	.request_port	= m32r_sio_request_port,
-	.config_port	= m32r_sio_config_port,
-	.verify_port	= m32r_sio_verify_port,
-};
-
-static struct uart_sio_port m32r_sio_ports[UART_NR];
-
-static void __init m32r_sio_init_ports(void)
-{
-	struct uart_sio_port *up;
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-	first = 0;
-
-	for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
-	     i++, up++) {
-		up->port.iobase   = old_serial_port[i].port;
-		up->port.irq      = irq_canonicalize(old_serial_port[i].irq);
-		up->port.uartclk  = old_serial_port[i].baud_base * 16;
-		up->port.flags    = old_serial_port[i].flags;
-		up->port.membase  = old_serial_port[i].iomem_base;
-		up->port.iotype   = old_serial_port[i].io_type;
-		up->port.regshift = old_serial_port[i].iomem_reg_shift;
-		up->port.ops      = &m32r_sio_pops;
-	}
-}
-
-static void __init m32r_sio_register_ports(struct uart_driver *drv)
-{
-	int i;
-
-	m32r_sio_init_ports();
-
-	for (i = 0; i < UART_NR; i++) {
-		struct uart_sio_port *up = &m32r_sio_ports[i];
-
-		up->port.line = i;
-		up->port.ops = &m32r_sio_pops;
-		init_timer(&up->timer);
-		up->timer.function = m32r_sio_timeout;
-
-		up->mcr_mask = ~0;
-		up->mcr_force = 0;
-
-		uart_add_one_port(drv, &up->port);
-	}
-}
-
-#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
-
-/*
- *	Wait for transmitter & holding register to empty
- */
-static inline void wait_for_xmitr(struct uart_sio_port *up)
-{
-	unsigned int status, tmout = 10000;
-
-	/* Wait up to 10ms for the character(s) to be sent. */
-	do {
-		status = sio_in(up, SIOSTS);
-
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while ((status & UART_EMPTY) != UART_EMPTY);
-
-	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
-		tmout = 1000000;
-		while (--tmout)
-			udelay(1);
-	}
-}
-
-static void m32r_sio_console_putchar(struct uart_port *port, int ch)
-{
-	struct uart_sio_port *up = (struct uart_sio_port *)port;
-
-	wait_for_xmitr(up);
-	sio_out(up, SIOTXB, ch);
-}
-
-/*
- *	Print a string to the serial port trying not to disturb
- *	any possible real use of the port...
- *
- *	The console_lock must be held when we get here.
- */
-static void m32r_sio_console_write(struct console *co, const char *s,
-	unsigned int count)
-{
-	struct uart_sio_port *up = &m32r_sio_ports[co->index];
-	unsigned int ier;
-
-	/*
-	 *	First save the UER then disable the interrupts
-	 */
-	ier = sio_in(up, SIOTRCR);
-	sio_out(up, SIOTRCR, 0);
-
-	uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
-
-	/*
-	 *	Finally, wait for transmitter to become empty
-	 *	and restore the IER
-	 */
-	wait_for_xmitr(up);
-	sio_out(up, SIOTRCR, ier);
-}
-
-static int __init m32r_sio_console_setup(struct console *co, char *options)
-{
-	struct uart_port *port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index >= UART_NR)
-		co->index = 0;
-	port = &m32r_sio_ports[co->index].port;
-
-	/*
-	 * Temporary fix.
-	 */
-	spin_lock_init(&port->lock);
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver m32r_sio_reg;
-static struct console m32r_sio_console = {
-	.name		= "ttyS",
-	.write		= m32r_sio_console_write,
-	.device		= uart_console_device,
-	.setup		= m32r_sio_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &m32r_sio_reg,
-};
-
-static int __init m32r_sio_console_init(void)
-{
-	sio_reset();
-	sio_init();
-	m32r_sio_init_ports();
-	register_console(&m32r_sio_console);
-	return 0;
-}
-console_initcall(m32r_sio_console_init);
-
-#define M32R_SIO_CONSOLE	&m32r_sio_console
-#else
-#define M32R_SIO_CONSOLE	NULL
-#endif
-
-static struct uart_driver m32r_sio_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "sio",
-	.dev_name		= "ttyS",
-	.major			= TTY_MAJOR,
-	.minor			= 64,
-	.nr			= UART_NR,
-	.cons			= M32R_SIO_CONSOLE,
-};
-
-/**
- *	m32r_sio_suspend_port - suspend one serial port
- *	@line: serial line number
- *
- *	Suspend one serial port.
- */
-void m32r_sio_suspend_port(int line)
-{
-	uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-/**
- *	m32r_sio_resume_port - resume one serial port
- *	@line: serial line number
- *
- *	Resume one serial port.
- */
-void m32r_sio_resume_port(int line)
-{
-	uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-static int __init m32r_sio_init(void)
-{
-	int ret, i;
-
-	printk(KERN_INFO "Serial: M32R SIO driver\n");
-
-	for (i = 0; i < nr_irqs; i++)
-		spin_lock_init(&irq_lists[i].lock);
-
-	ret = uart_register_driver(&m32r_sio_reg);
-	if (ret >= 0)
-		m32r_sio_register_ports(&m32r_sio_reg);
-
-	return ret;
-}
-
-static void __exit m32r_sio_exit(void)
-{
-	int i;
-
-	for (i = 0; i < UART_NR; i++)
-		uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port);
-
-	uart_unregister_driver(&m32r_sio_reg);
-}
-
-module_init(m32r_sio_init);
-module_exit(m32r_sio_exit);
-
-EXPORT_SYMBOL(m32r_sio_suspend_port);
-EXPORT_SYMBOL(m32r_sio_resume_port);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic M32R SIO serial driver");
diff --git a/drivers/tty/serial/8250/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h
deleted file mode 100644
index e9b7e11793b..00000000000
--- a/drivers/tty/serial/8250/m32r_sio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  m32r_sio.h
- *
- *  Driver for M32R serial ports
- *
- *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *  Based on drivers/serial/8250.h.
- *
- *  Copyright (C) 2001  Russell King.
- *  Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-
-struct m32r_sio_probe {
-	struct module	*owner;
-	int		(*pci_init_one)(struct pci_dev *dev);
-	void		(*pci_remove_one)(struct pci_dev *dev);
-	void		(*pnp_init)(void);
-};
-
-int m32r_sio_register_probe(struct m32r_sio_probe *probe);
-void m32r_sio_unregister_probe(struct m32r_sio_probe *probe);
-void m32r_sio_get_irq_map(unsigned int *map);
-void m32r_sio_suspend_port(int line);
-void m32r_sio_resume_port(int line);
-
-struct old_serial_port {
-	unsigned int uart;
-	unsigned int baud_base;
-	unsigned int port;
-	unsigned int irq;
-	unsigned int flags;
-	unsigned char io_type;
-	unsigned char __iomem *iomem_base;
-	unsigned short iomem_reg_shift;
-};
-
-#define _INLINE_ inline
-
-#define PROBE_RSA	(1 << 0)
-#define PROBE_ANY	(~0)
-
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
diff --git a/drivers/tty/serial/8250/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h
deleted file mode 100644
index 4671473793e..00000000000
--- a/drivers/tty/serial/8250/m32r_sio_reg.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * m32r_sio_reg.h
- *
- * Copyright (C) 1992, 1994 by Theodore Ts'o.
- * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- *
- * These are the UART port assignments, expressed as offsets from the base
- * register.  These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#ifndef _M32R_SIO_REG_H
-#define _M32R_SIO_REG_H
-
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define SIOCR		0x000
-#define SIOMOD0		0x002
-#define SIOMOD1		0x004
-#define SIOSTS		0x006
-#define SIOTRCR		0x008
-#define SIOBAUR		0x00a
-// #define SIORBAUR	0x018
-#define SIOTXB		0x00c
-#define SIORXB		0x00e
-
-#define UART_RX		((unsigned long) PLD_ESIO0RXB)
-				/* In:  Receive buffer (DLAB=0) */
-#define UART_TX		((unsigned long) PLD_ESIO0TXB)
-				/* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG	0	/* (LCR=BF) FCTR bit 7 selects Rx or Tx
-				 * In: Fifo count
-				 * Out: Fifo custom trigger levels
-				 * XR16C85x only */
-
-#define UART_DLM	0	/* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER	((unsigned long) PLD_ESIO0INTCR)
-				/* Out: Interrupt Enable Register */
-#define UART_FCTR	0	/* (LCR=BF) Feature Control Register
-				 * XR16C85x only */
-
-#define UART_IIR	0	/* In:  Interrupt ID Register */
-#define UART_FCR	0	/* Out: FIFO Control Register */
-#define UART_EFR	0	/* I/O: Extended Features Register */
-				/* (DLAB=1, 16C660 only) */
-
-#define UART_LCR	0	/* Out: Line Control Register */
-#define UART_MCR	0	/* Out: Modem Control Register */
-#define UART_LSR	((unsigned long) PLD_ESIO0STS)
-				/* In:  Line Status Register */
-#define UART_MSR	0	/* In:  Modem Status Register */
-#define UART_SCR	0	/* I/O: Scratch Register */
-#define UART_EMSR	0	/* (LCR=BF) Extended Mode Select Register
-				 * FCTR bit 6 selects SCR or EMSR
-				 * XR16c85x only */
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define SIOCR		0x000
-#define SIOMOD0		0x004
-#define SIOMOD1		0x008
-#define SIOSTS		0x00c
-#define SIOTRCR		0x010
-#define SIOBAUR		0x014
-#define SIORBAUR	0x018
-#define SIOTXB		0x01c
-#define SIORXB		0x020
-
-#define UART_RX		M32R_SIO0_RXB_PORTL	/* In:  Receive buffer (DLAB=0) */
-#define UART_TX		M32R_SIO0_TXB_PORTL	/* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG	0	/* (LCR=BF) FCTR bit 7 selects Rx or Tx
-				 * In: Fifo count
-				 * Out: Fifo custom trigger levels
-				 * XR16C85x only */
-
-#define UART_DLM	0	/* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER	M32R_SIO0_TRCR_PORTL	/* Out: Interrupt Enable Register */
-#define UART_FCTR	0	/* (LCR=BF) Feature Control Register
-				 * XR16C85x only */
-
-#define UART_IIR	0	/* In:  Interrupt ID Register */
-#define UART_FCR	0	/* Out: FIFO Control Register */
-#define UART_EFR	0	/* I/O: Extended Features Register */
-				/* (DLAB=1, 16C660 only) */
-
-#define UART_LCR	0	/* Out: Line Control Register */
-#define UART_MCR	0	/* Out: Modem Control Register */
-#define UART_LSR	M32R_SIO0_STS_PORTL	/* In:  Line Status Register */
-#define UART_MSR	0	/* In:  Modem Status Register */
-#define UART_SCR	0	/* I/O: Scratch Register */
-#define UART_EMSR	0	/* (LCR=BF) Extended Mode Select Register
-				 * FCTR bit 6 selects SCR or EMSR
-				 * XR16c85x only */
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-#define UART_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
-
-/*
- * These are the definitions for the Line Control Register
- *
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
-#define UART_LCR_SBC	0x40	/* Set break control */
-#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
-#define UART_LCR_EPAR	0x10	/* Even parity select */
-#define UART_LCR_PARITY	0x08	/* Parity Enable */
-#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
-#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
-#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
-#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT	0x02	/* Transmitter empty */
-#define UART_LSR_THRE	0x01	/* Transmit-hold-register empty */
-#define UART_LSR_BI	0x00	/* Break interrupt indicator */
-#define UART_LSR_FE	0x80	/* Frame error indicator */
-#define UART_LSR_PE	0x40	/* Parity error indicator */
-#define UART_LSR_OE	0x20	/* Overrun error indicator */
-#define UART_LSR_DR	0x04	/* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
-#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
-
-#define UART_IIR_MSI	0x00	/* Modem status interrupt */
-#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
-#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
-#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI	0x00	/* Enable Modem status interrupt */
-#define UART_IER_RLSI	0x08	/* Enable receiver line status interrupt */
-#define UART_IER_THRI	0x03	/* Enable Transmitter holding register int. */
-#define UART_IER_RDI	0x04	/* Enable receiver data interrupt */
-
-#endif /* _M32R_SIO_REG_H */