pcmcia: CardBus doesn't need CIS access

At least no in-kernel CardBus-capable PCI driver makes use of the CIS
access functions. Therefore, it seems sensible to remove this unused
code, and cleanup cardbus.c a lot.

CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 14 insertions, 161 deletions

diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index d99f846451a..ac0686efbf7 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -20,170 +20,12 @@
  */
 
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include "cs_internal.h"
-
-/*====================================================================*/
-
-/* Offsets in the Expansion ROM Image Header */
-#define ROM_SIGNATURE		0x0000	/* 2 bytes */
-#define ROM_DATA_PTR		0x0018	/* 2 bytes */
-
-/* Offsets in the CardBus PC Card Data Structure */
-#define PCDATA_SIGNATURE	0x0000	/* 4 bytes */
-#define PCDATA_VPD_PTR		0x0008	/* 2 bytes */
-#define PCDATA_LENGTH		0x000a	/* 2 bytes */
-#define PCDATA_REVISION		0x000c
-#define PCDATA_IMAGE_SZ		0x0010	/* 2 bytes */
-#define PCDATA_ROM_LEVEL	0x0012	/* 2 bytes */
-#define PCDATA_CODE_TYPE	0x0014
-#define PCDATA_INDICATOR	0x0015
-
-/*=====================================================================
-
-    Expansion ROM's have a special layout, and pointers specify an
-    image number and an offset within that image.  xlate_rom_addr()
-    converts an image/offset address to an absolute offset from the
-    ROM's base address.
-
-=====================================================================*/
-
-static u_int xlate_rom_addr(void __iomem *b, u_int addr)
-{
-	u_int img = 0, ofs = 0, sz;
-	u_short data;
-	while ((readb(b) == 0x55) && (readb(b + 1) == 0xaa)) {
-		if (img == (addr >> 28))
-			return (addr & 0x0fffffff) + ofs;
-		data = readb(b + ROM_DATA_PTR) + (readb(b + ROM_DATA_PTR + 1) << 8);
-		sz = 512 * (readb(b + data + PCDATA_IMAGE_SZ) +
-			    (readb(b + data + PCDATA_IMAGE_SZ + 1) << 8));
-		if ((sz == 0) || (readb(b + data + PCDATA_INDICATOR) & 0x80))
-			break;
-		b += sz;
-		ofs += sz;
-		img++;
-	}
-	return 0;
-}
-
-/*=====================================================================
-
-    These are similar to setup_cis_mem and release_cis_mem for 16-bit
-    cards.  The "result" that is used externally is the cb_cis_virt
-    pointer in the struct pcmcia_socket structure.
-
-=====================================================================*/
-
-static void cb_release_cis_mem(struct pcmcia_socket *s)
-{
-	if (s->cb_cis_virt) {
-		dev_dbg(&s->dev, "cb_release_cis_mem()\n");
-		iounmap(s->cb_cis_virt);
-		s->cb_cis_virt = NULL;
-		s->cb_cis_res = NULL;
-	}
-}
-
-static int cb_setup_cis_mem(struct pcmcia_socket *s, struct resource *res)
-{
-	unsigned int start, size;
-
-	if (res == s->cb_cis_res)
-		return 0;
-
-	if (s->cb_cis_res)
-		cb_release_cis_mem(s);
-
-	start = res->start;
-	size = res->end - start + 1;
-	s->cb_cis_virt = ioremap(start, size);
-
-	if (!s->cb_cis_virt)
-		return -1;
-
-	s->cb_cis_res = res;
-
-	return 0;
-}
-
-/*=====================================================================
-
-    This is used by the CIS processing code to read CIS information
-    from a CardBus device.
-
-=====================================================================*/
-
-int read_cb_mem(struct pcmcia_socket *s, int space, u_int addr, u_int len,
-		void *ptr)
-{
-	struct pci_dev *dev;
-	struct resource *res;
-
-	dev_dbg(&s->dev, "read_cb_mem(%d, %#x, %u)\n", space, addr, len);
 
-	dev = pci_get_slot(s->cb_dev->subordinate, 0);
-	if (!dev)
-		goto fail;
-
-	/* Config space? */
-	if (space == 0) {
-		if (addr + len > 0x100)
-			goto failput;
-		for (; len; addr++, ptr++, len--)
-			pci_read_config_byte(dev, addr, ptr);
-		return 0;
-	}
-
-	res = dev->resource + space - 1;
-
-	pci_dev_put(dev);
-
-	if (!res->flags)
-		goto fail;
-
-	if (cb_setup_cis_mem(s, res) != 0)
-		goto fail;
-
-	if (space == 7) {
-		addr = xlate_rom_addr(s->cb_cis_virt, addr);
-		if (addr == 0)
-			goto fail;
-	}
-
-	if (addr + len > res->end - res->start)
-		goto fail;
-
-	memcpy_fromio(ptr, s->cb_cis_virt + addr, len);
-	return 0;
-
-failput:
-	pci_dev_put(dev);
-fail:
-	memset(ptr, 0xff, len);
-	return -1;
-}
-
-/*=====================================================================
-
-    cb_alloc() and cb_free() allocate and free the kernel data
-    structures for a Cardbus device, and handle the lowest level PCI
-    device setup issues.
-
-=====================================================================*/
 
 static void cardbus_config_irq_and_cls(struct pci_bus *bus, int irq)
 {
@@ -215,6 +57,13 @@ static void cardbus_config_irq_and_cls(struct pci_bus *bus, int irq)
 	}
 }
 
+/**
+ * cb_alloc() - add CardBus device
+ * @s:		the pcmcia_socket where the CardBus device is located
+ *
+ * cb_alloc() allocates the kernel data structures for a Cardbus device
+ * and handles the lowest level PCI device setup issues.
+ */
 int __ref cb_alloc(struct pcmcia_socket *s)
 {
 	struct pci_bus *bus = s->cb_dev->subordinate;
@@ -249,12 +98,16 @@ int __ref cb_alloc(struct pcmcia_socket *s)
 	return 0;
 }
 
+/**
+ * cb_free() - remove CardBus device
+ * @s:		the pcmcia_socket where the CardBus device was located
+ *
+ * cb_free() handles the lowest level PCI device cleanup.
+ */
 void cb_free(struct pcmcia_socket *s)
 {
 	struct pci_dev *bridge = s->cb_dev;
 
-	cb_release_cis_mem(s);
-
 	if (bridge)
 		pci_remove_behind_bridge(bridge);
 }