Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4694/1: IXP4xx: Update clockevent support for shutdown and resume
  [ARM] 4710/1: Fix coprocessor 14 usage for debug messages via ICEDCC
  [ARM] 4690/1: PXA: fix CKEN corruption in PXA27x AC97 cold reset code
  [ARM] 4667/1: CM-X270 fixes

5 files changed, 25 insertions, 23 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a7e9fea978a..c4de2d4664d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -537,7 +537,7 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -558,6 +558,12 @@ config PCI_HOST_VIA82C505
 	depends on PCI && ARCH_SHARK
 	default y
 
+config PCI_HOST_ITE8152
+	bool
+	depends on PCI && MACH_ARMCORE
+	default y
+	select DMABOUNCE
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b9b03eda70e..5cac46a19bb 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -31,7 +31,7 @@
 		.macro	loadsp, rb
 		.endm
 		.macro	writeb, ch, rb
-		mcr	p14, 0, \ch, c0, c1, 0
+		mcr	p14, 0, \ch, c1, c0, 0
 		.endm
 #endif
 
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index c03de9bfd76..97b7dc13d9a 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -70,8 +70,6 @@ static inline void it8152_irq(int irq)
 {
 	struct irq_desc *desc;
 
-	printk(KERN_DEBUG "===> %s: irq=%d\n", __FUNCTION__, irq);
-
 	desc = irq_desc + irq;
 	desc_handle_irq(irq, desc);
 }
@@ -106,8 +104,6 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
        int bits_pd, bits_lp, bits_ld;
        int i;
 
-       printk(KERN_DEBUG "=> %s: irq = %d\n", __FUNCTION__, irq);
-
        while (1) {
 	       /* Read all */
 	       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
@@ -293,8 +289,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
  */
 int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 {
-	printk(KERN_DEBUG "%s: %s %llx\n",
-	       __FUNCTION__, dev->dev.bus_id, mask);
+	dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
 	if (mask >= PHYS_OFFSET + SZ_64M - 1)
 		return 0;
 
@@ -304,8 +299,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 int
 pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 {
-	printk(KERN_DEBUG "%s: %s %llx\n",
-	       __FUNCTION__, dev->dev.bus_id, mask);
+	dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
 	if (mask >= PHYS_OFFSET + SZ_64M - 1)
 		return 0;
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index c1271c44924..f6d66dce685 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -442,7 +442,8 @@ static int ixp4xx_set_next_event(unsigned long evt,
 static void ixp4xx_set_mode(enum clock_event_mode mode,
 			    struct clock_event_device *evt)
 {
-	unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
+	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
+	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -455,12 +456,15 @@ static void ixp4xx_set_mode(enum clock_event_mode mode,
 		opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
+		opts &= ~IXP4XX_OST_ENABLE;
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		opts |= IXP4XX_OST_ENABLE;
+		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	default:
 		osrt = opts = 0;
 		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
 	}
 
 	*IXP4XX_OSRT1 = osrt | opts;
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 878d3b9b863..15c4e0df3e1 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -40,7 +40,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
-	printk(KERN_INFO "Adjusting zones for CM-x270\n");
+	pr_info("Adjusting zones for CM-x270\n");
 
 	/*
 	 * Only adjust if > 64M on current system
@@ -104,8 +104,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
-	printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__,
-	       pci_name(dev), slot, pin);
+	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin);
 
 	irq = it8152_pci_map_irq(dev, slot, pin);
 	if (irq)
@@ -141,14 +140,13 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	return(0);
 }
 
-static struct pci_bus * __init
-cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
+static void cmx270_pci_preinit(void)
 {
-	printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n");
+	pr_info("Initializing CM-X270 PCI subsystem\n");
 
 	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
 	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
-		printk(KERN_INFO "PCI Bridge found.\n");
+		pr_info("PCI Bridge found.\n");
 
 		/* set PCI I/O base at 0 */
 		writel(0x848, IT8152_PCI_CFG_ADDR);
@@ -163,7 +161,7 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
 		/* CardBus Controller on ATXbase baseboard */
 		writel(0x4000, IT8152_PCI_CFG_ADDR);
 		if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
-			printk(KERN_INFO "CardBus Bridge found.\n");
+			pr_info("CardBus Bridge found.\n");
 
 			/* Configure socket 0 */
 			writel(0x408C, IT8152_PCI_CFG_ADDR);
@@ -196,7 +194,6 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
 			writel(0xb0000000, IT8152_PCI_CFG_DATA);
 		}
 	}
-	return it8152_pci_scan_bus(nr, sys);
 }
 
 static struct hw_pci cmx270_pci __initdata = {
@@ -204,7 +201,8 @@ static struct hw_pci cmx270_pci __initdata = {
 	.map_irq	= cmx270_pci_map_irq,
 	.nr_controllers	= 1,
 	.setup		= it8152_pci_setup,
-	.scan		= cmx270_pci_scan_bus,
+	.scan		= it8152_pci_scan_bus,
+	.preinit	= cmx270_pci_preinit,
 };
 
 static int __init cmx270_init_pci(void)