Merge branch 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers into asm-generic

Patches from David Howells <dhowells@redhat.com>:

This is to complete part of the UAPI disintegration for which the
preparatory patches were pulled recently.

Note that there are some fixup patches which are at the base of the
branch aimed at you, plus all arches get the asm-generic branch merged in too.

* 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/asm-generic
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

28 files changed, 206 insertions, 1209 deletions

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 53d3d46dec1..c77c86c4736 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@ config UX500_SOC_COMMON
 	select CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
+	select COMMON_CLK
 
 config UX500_SOC_DB8500
 	bool
@@ -28,6 +29,7 @@ config MACH_MOP500
 	select I2C
 	select I2C_NOMADIK
 	select SOC_BUS
+	select REGULATOR_FIXED_VOLTAGE
 	help
 	  Include support for the MOP500 development platform.
 
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 026086ff9e6..f24710dfc39 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= clock.o cpu.o devices.o devices-common.o \
+obj-y				:= cpu.o devices.o devices-common.o \
 				   id.o usb.o timer.o
 obj-$(CONFIG_CPU_IDLE)          += cpuidle.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
@@ -12,6 +12,6 @@ obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-uib.o board-mop500-stuib.o \
 				board-mop500-u8500uib.o \
 				board-mop500-pins.o \
-				board-mop500-msp.o
+				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
index dd5cd00e255..760a0efe758 100644
--- a/arch/arm/mach-ux500/Makefile.boot
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -1,5 +1,3 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-audio.c
index df15646036a..070629a9562 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,7 +7,6 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <plat/gpio-nomadik.h>
 #include <plat/pincfg.h>
@@ -23,53 +22,6 @@
 #include "devices-db8500.h"
 #include "pins-db8500.h"
 
-/* MSP1/3 Tx/Rx usage protection */
-static DEFINE_SPINLOCK(msp_rxtx_lock);
-
-/* Reference Count */
-static int msp_rxtx_ref;
-
-/* Pin modes */
-struct pinctrl *msp1_p;
-struct pinctrl_state *msp1_def;
-struct pinctrl_state *msp1_sleep;
-
-int msp13_i2s_init(void)
-{
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msp_rxtx_lock, flags);
-	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
-		retval = pinctrl_select_state(msp1_p, msp1_def);
-		if (retval)
-			pr_err("could not set MSP1 defstate\n");
-	}
-	if (!retval)
-		msp_rxtx_ref++;
-	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-
-	return retval;
-}
-
-int msp13_i2s_exit(void)
-{
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msp_rxtx_lock, flags);
-	WARN_ON(!msp_rxtx_ref);
-	msp_rxtx_ref--;
-	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
-		retval = pinctrl_select_state(msp1_p, msp1_sleep);
-		if (retval)
-			pr_err("could not set MSP1 sleepstate\n");
-	}
-	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-
-	return retval;
-}
-
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
 	.dir = STEDMA40_PERIPH_TO_MEM,
@@ -96,7 +48,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = {
 	/* data_width is set during configuration */
 };
 
-static struct msp_i2s_platform_data msp0_platform_data = {
+struct msp_i2s_platform_data msp0_platform_data = {
 	.id = MSP_I2S_0,
 	.msp_i2s_dma_rx = &msp0_dma_rx,
 	.msp_i2s_dma_tx = &msp0_dma_tx,
@@ -128,12 +80,10 @@ static struct stedma40_chan_cfg msp1_dma_tx = {
 	/* data_width is set during configuration */
 };
 
-static struct msp_i2s_platform_data msp1_platform_data = {
+struct msp_i2s_platform_data msp1_platform_data = {
 	.id = MSP_I2S_1,
 	.msp_i2s_dma_rx = NULL,
 	.msp_i2s_dma_tx = &msp1_dma_tx,
-	.msp_i2s_init = msp13_i2s_init,
-	.msp_i2s_exit = msp13_i2s_exit,
 };
 
 static struct stedma40_chan_cfg msp2_dma_rx = {
@@ -193,11 +143,11 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 
 /* Platform device for ASoC MOP500 machine */
 static struct platform_device snd_soc_mop500 = {
-		.name = "snd-soc-mop500",
-		.id = 0,
-		.dev = {
-			.platform_data = NULL,
-		},
+	.name = "snd-soc-mop500",
+	.id = 0,
+	.dev = {
+		.platform_data = NULL,
+	},
 };
 
 /* Platform device for Ux500-PCM */
@@ -209,59 +159,37 @@ static struct platform_device ux500_pcm = {
 		},
 };
 
-static struct msp_i2s_platform_data msp2_platform_data = {
+struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
 	.msp_i2s_dma_tx = &msp2_dma_tx,
 };
 
-static struct msp_i2s_platform_data msp3_platform_data = {
+struct msp_i2s_platform_data msp3_platform_data = {
 	.id		= MSP_I2S_3,
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
-	.msp_i2s_init = msp13_i2s_init,
-	.msp_i2s_exit = msp13_i2s_exit,
 };
 
-int mop500_msp_init(struct device *parent)
+void mop500_audio_init(struct device *parent)
 {
-	struct platform_device *msp1;
-
 	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
 	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
 			   &msp0_platform_data);
-	msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
 			   &msp1_platform_data);
 	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
 			   &msp2_platform_data);
 	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
 			   &msp3_platform_data);
+}
 
-	/* Get the pinctrl handle for MSP1 */
-	if (msp1) {
-		msp1_p = pinctrl_get(&msp1->dev);
-		if (IS_ERR(msp1_p))
-			dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
-		else {
-			msp1_def = pinctrl_lookup_state(msp1_p,
-							PINCTRL_STATE_DEFAULT);
-			if (IS_ERR(msp1_def)) {
-				dev_err(&msp1->dev,
-					"could not get MSP1 defstate\n");
-			}
-			msp1_sleep = pinctrl_lookup_state(msp1_p,
-							  PINCTRL_STATE_SLEEP);
-			if (IS_ERR(msp1_sleep))
-				dev_err(&msp1->dev,
-					"could not get MSP1 idlestate\n");
-		}
-	}
-
+/* Due for removal once the MSP driver has been fully DT:ed. */
+void mop500_of_audio_init(struct device *parent)
+{
 	pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
 	platform_device_register(&ux500_pcm);
-
-	return 0;
 }
diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h
deleted file mode 100644
index 6fcfb5e2cc9..00000000000
--- a/arch/arm/mach-ux500/board-mop500-msp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2012
- *
- * Author: Ola Lilja <ola.o.lilja@stericsson.com>,
- *         for ST-Ericsson.
- *
- * License terms:
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-void mop500_msp_init(struct device *parent);
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 32fd9920446..a267c6d30e3 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -30,16 +30,15 @@ static enum custom_pin_cfg_t pinsfor;
 #define BIAS(a,b) static unsigned long a[] = { b }
 
 BIAS(pd, PIN_PULL_DOWN);
-BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
 BIAS(in_nopull, PIN_INPUT_NOPULL);
-BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
+BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
 BIAS(in_pu, PIN_INPUT_PULLUP);
 BIAS(in_pd, PIN_INPUT_PULLDOWN);
 BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP);
 BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW);
 BIAS(out_hi, PIN_OUTPUT_HIGH);
 BIAS(out_lo, PIN_OUTPUT_LOW);
-BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
+BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
 /* These also force them into GPIO mode */
 BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
 BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
@@ -48,23 +47,32 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL
 BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
 BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
 /* Sleep modes */
-BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE);
-BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
-BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
 
 /* We use these to define hog settings that are always done on boot */
 #define DB8500_MUX_HOG(group,func) \
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
 #define DB8500_PIN_HOG(pin,conf) \
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
+#define DB8500_PIN_SLEEP(pin, conf, dev) \
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
+			    pin, conf)
 
 /* These are default states associated with device and changed runtime */
 #define DB8500_MUX(group,func,dev) \
 	PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
 #define DB8500_PIN(pin,conf,dev) \
 	PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
+#define DB8500_PIN_SLEEP(pin, conf, dev) \
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
+			    pin, conf)
 
 #define DB8500_PIN_SLEEP(pin,conf,dev) \
 	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
@@ -134,40 +142,47 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
 	DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
 	DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
 	/* UART0 sleep state */
-	DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"),
 	/* MSP1 for ALSA codec */
 	DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
 	DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO33_AF2", out_lo_slpm_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO34_AE1", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO35_AE2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO36_AG2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
 	/* MSP1 sleep state */
-	DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"),
-	DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
-	DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
-	DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO33_AF2", slpm_out_lo_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO34_AE1", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO35_AE2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO36_AG2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
 	/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
 	DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
 	DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
 	/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
 	DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"),
-	/* Mux in I2C blocks, put pins into GPIO in sleepmode no pull-up */
+	/* Mux in i2c0 block, default state */
 	DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
-	DB8500_PIN("GPIO147_C15", slpm_gpio_nopull, "nmk-i2c.0"),
-	DB8500_PIN("GPIO148_B16", slpm_gpio_nopull, "nmk-i2c.0"),
+	/* i2c0 sleep state */
+	DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */
+	/* Mux in i2c1 block, default state  */
 	DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
-	DB8500_PIN("GPIO16_AD3", slpm_gpio_nopull, "nmk-i2c.1"),
-	DB8500_PIN("GPIO17_AD4", slpm_gpio_nopull, "nmk-i2c.1"),
+	/* i2c1 sleep state */
+	DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */
+	/* Mux in i2c2 block, default state  */
 	DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
-	DB8500_PIN("GPIO10_AF5", slpm_gpio_nopull, "nmk-i2c.2"),
-	DB8500_PIN("GPIO11_AG4", slpm_gpio_nopull, "nmk-i2c.2"),
+	/* i2c2 sleep state */
+	DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */
+	/* Mux in i2c3 block, default state  */
 	DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
-	DB8500_PIN("GPIO229_AG7", slpm_gpio_nopull, "nmk-i2c.3"),
-	DB8500_PIN("GPIO230_AF7", slpm_gpio_nopull, "nmk-i2c.3"),
+	/* i2c3 sleep state */
+	DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */
 	/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
 	DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
 	DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
@@ -219,11 +234,15 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
 	DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"),
 	DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */
 	/* Mux in SPI2 pins on the "other C1" altfunction */
-	DB8500_MUX("spi2_oc1_1", "spi2", "spi2"),
+	DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
 	DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
 	DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
 	DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
 	DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
+	/* SPI2 sleep state */
+	DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
+	DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
+	DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
 };
 
 /*
@@ -410,7 +429,7 @@ static struct pinctrl_map __initdata u9500_pinmap[] = {
 	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
 	/* HSI */
 	DB8500_MUX_HOG("hsir_a_1", "hsi"),
-	DB8500_MUX_HOG("hsit_a_1", "hsi"),
+	DB8500_MUX_HOG("hsit_a_2", "hsi"),
 	DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
 	DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
 	DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
@@ -418,7 +437,7 @@ static struct pinctrl_map __initdata u9500_pinmap[] = {
 	DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
 	DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
 	DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
-	DB8500_PIN_HOG("GPIO226_AF8", out_hi), /* ACWAKE0 */
+	DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */
 };
 
 static struct pinctrl_map __initdata u8500_pinmap[] = {
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 52426a42578..2a17bc506cf 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -13,6 +13,21 @@
 #include <linux/regulator/ab8500.h>
 #include "board-mop500-regulators.h"
 
+static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
+       REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+struct regulator_init_data gpio_en_3v3_regulator = {
+       .constraints = {
+               .name = "EN-3V3",
+               .min_uV = 3300000,
+               .max_uV = 3300000,
+               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
+       .consumer_supplies = gpio_en_3v3_consumers,
+};
+
 /*
  * TPS61052 regulator
  */
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index 94992158d96..78a0642a220 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -18,5 +18,6 @@ extern struct ab8500_regulator_reg_init
 ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
 extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
 extern struct regulator_init_data tps61052_regulator;
+extern struct regulator_init_data gpio_en_3v3_regulator;
 
 #endif
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 18ff781cfbe..9c8e4a9e83e 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -152,7 +152,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi1_data = {
+struct mmci_platform_data mop500_sdi1_data = {
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA,
@@ -189,7 +189,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi2_data = {
+struct mmci_platform_data mop500_sdi2_data = {
 	.ocr_mask	= MMC_VDD_165_195,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a534d8880de..416d436111f 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -23,6 +23,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
+#include <linux/regulator/fixed.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
 #include <linux/mfd/abx500/ab8500-gpio.h>
@@ -48,13 +49,12 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
-#include "board-mop500-msp.h"
 
 static struct gpio_led snowball_led_array[] = {
 	{
@@ -76,6 +76,23 @@ static struct platform_device snowball_led_dev = {
 	},
 };
 
+static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
+       .supply_name            = "EN-3V3",
+       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
+       .microvolts             = 3300000,
+       .enable_high            = 1,
+       .init_data              = &gpio_en_3v3_regulator,
+       .startup_delay          = 5000, /* 1200us */
+};
+
+static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
+       .name   = "reg-fixed-voltage",
+       .id     = 1,
+       .dev    = {
+               .platform_data  = &snowball_gpio_en_3v3_data,
+       },
+};
+
 static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
 	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
 	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
@@ -524,33 +541,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-	void __iomem *prcc_rst_set, *prcc_rst_clr;
-
-	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_SET);
-	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_CLEAR);
-
-	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-	udelay(1);
-
-	/* Release soft reset PRCC_K_SOFTRST_SET */
-	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-	udelay(1);
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-	.reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {
@@ -586,6 +582,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_led_dev,
 	&snowball_key_dev,
 	&snowball_sbnet_dev,
+	&snowball_gpio_en_3v3_regulator_dev,
 };
 
 static void __init mop500_init_machine(void)
@@ -608,7 +605,7 @@ static void __init mop500_init_machine(void)
 	mop500_i2c_init(parent);
 	mop500_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	u8500_cryp1_hash1_init(parent);
@@ -642,7 +639,7 @@ static void __init snowball_init_machine(void)
 	mop500_i2c_init(parent);
 	snowball_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	/* This board has full regulator constraints */
@@ -674,7 +671,7 @@ static void __init hrefv60_init_machine(void)
 	mop500_i2c_init(parent);
 	hrefv60_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -694,6 +691,7 @@ static void __init hrefv60_init_machine(void)
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -705,6 +703,7 @@ MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
@@ -715,6 +714,7 @@ MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -726,12 +726,9 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_UX500_DT
 
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-};
-
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+	/* Requires call-back bindings. */
+	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
@@ -739,6 +736,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires DMA bindings. */
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	/* Requires clock name bindings. */
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
@@ -757,6 +756,15 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+	/* Requires clock name and DMA bindings. */
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		"ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		"ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		"ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		"ux500-msp-i2s.3", &msp3_platform_data),
 	{},
 };
 
@@ -797,7 +805,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
-		mop500_msp_init(parent);
+		mop500_audio_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -806,7 +814,7 @@ static void __init u8500_init_machine(void)
 		mop500_uib_init();
 
 	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		mop500_msp_init(parent);
+		mop500_of_audio_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -817,16 +825,6 @@ static void __init u8500_init_machine(void)
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
-		hrefv60_sdi_init(parent);
-		mop500_msp_init(parent);
-
-		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-		i2c_register_board_info(2, mop500_i2c2_devices,
-					ARRAY_SIZE(mop500_i2c2_devices));
-
 		mop500_uib_init();
 	}
 
@@ -844,6 +842,7 @@ static const char * u8500_dt_board_compat[] = {
 
 
 DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index b5bfc1a78b1..aca39a68712 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -9,6 +9,7 @@
 
 /* For NOMADIK_NR_GPIO */
 #include <mach/irqs.h>
+#include <mach/msp.h>
 #include <linux/amba/mmci.h>
 
 /* Snowball specific GPIO assignments, this board has no GPIO expander */
@@ -80,7 +81,14 @@
 struct device;
 struct i2c_board_info;
 extern struct mmci_platform_data mop500_sdi0_data;
+extern struct mmci_platform_data mop500_sdi1_data;
+extern struct mmci_platform_data mop500_sdi2_data;
 extern struct mmci_platform_data mop500_sdi4_data;
+extern struct msp_i2s_platform_data msp0_platform_data;
+extern struct msp_i2s_platform_data msp1_platform_data;
+extern struct msp_i2s_platform_data msp2_platform_data;
+extern struct msp_i2s_platform_data msp3_platform_data;
+extern struct arm_pmu_platdata db8500_pmu_platdata;
 
 extern void mop500_sdi_init(struct device *parent);
 extern void snowball_sdi_init(struct device *parent);
@@ -91,6 +99,9 @@ void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
+void mop500_audio_init(struct device *parent);
+/* Due for removal once the MSP driver has been fully DT:ed. */
+void mop500_of_audio_init(struct device *parent);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index dc12394295d..75d5b512a3d 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -38,7 +38,7 @@ static int __init ux500_l2x0_init(void)
 {
 	u32 aux_val = 0x3e000000;
 
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		l2x0_base = __io_address(U8500_L2CC_BASE);
 	else
 		ux500_unknown_soc();
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
deleted file mode 100644
index 8d73b066a18..00000000000
--- a/arch/arm/mach-ux500/clock.c
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- *  Copyright (C) 2009 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
-
-#include <plat/mtu.h>
-#include <mach/hardware.h>
-#include "clock.h"
-
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>	/* for copy_from_user */
-static LIST_HEAD(clk_list);
-#endif
-
-#define PRCC_PCKEN		0x00
-#define PRCC_PCKDIS		0x04
-#define PRCC_KCKEN		0x08
-#define PRCC_KCKDIS		0x0C
-
-#define PRCM_YYCLKEN0_MGT_SET	0x510
-#define PRCM_YYCLKEN1_MGT_SET	0x514
-#define PRCM_YYCLKEN0_MGT_CLR	0x518
-#define PRCM_YYCLKEN1_MGT_CLR	0x51C
-#define PRCM_YYCLKEN0_MGT_VAL	0x520
-#define PRCM_YYCLKEN1_MGT_VAL	0x524
-
-#define PRCM_SVAMMDSPCLK_MGT	0x008
-#define PRCM_SIAMMDSPCLK_MGT	0x00C
-#define PRCM_SGACLK_MGT		0x014
-#define PRCM_UARTCLK_MGT	0x018
-#define PRCM_MSP02CLK_MGT	0x01C
-#define PRCM_MSP1CLK_MGT	0x288
-#define PRCM_I2CCLK_MGT		0x020
-#define PRCM_SDMMCCLK_MGT	0x024
-#define PRCM_SLIMCLK_MGT	0x028
-#define PRCM_PER1CLK_MGT	0x02C
-#define PRCM_PER2CLK_MGT	0x030
-#define PRCM_PER3CLK_MGT	0x034
-#define PRCM_PER5CLK_MGT	0x038
-#define PRCM_PER6CLK_MGT	0x03C
-#define PRCM_PER7CLK_MGT	0x040
-#define PRCM_LCDCLK_MGT		0x044
-#define PRCM_BMLCLK_MGT		0x04C
-#define PRCM_HSITXCLK_MGT	0x050
-#define PRCM_HSIRXCLK_MGT	0x054
-#define PRCM_HDMICLK_MGT	0x058
-#define PRCM_APEATCLK_MGT	0x05C
-#define PRCM_APETRACECLK_MGT	0x060
-#define PRCM_MCDECLK_MGT	0x064
-#define PRCM_IPI2CCLK_MGT	0x068
-#define PRCM_DSIALTCLK_MGT	0x06C
-#define PRCM_DMACLK_MGT		0x074
-#define PRCM_B2R2CLK_MGT	0x078
-#define PRCM_TVCLK_MGT		0x07C
-#define PRCM_TCR		0x1C8
-#define PRCM_TCR_STOPPED	(1 << 16)
-#define PRCM_TCR_DOZE_MODE	(1 << 17)
-#define PRCM_UNIPROCLK_MGT	0x278
-#define PRCM_SSPCLK_MGT		0x280
-#define PRCM_RNGCLK_MGT		0x284
-#define PRCM_UICCCLK_MGT	0x27C
-
-#define PRCM_MGT_ENABLE		(1 << 8)
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (clk->enabled++ == 0) {
-		if (clk->parent_cluster)
-			__clk_enable(clk->parent_cluster);
-
-		if (clk->parent_periph)
-			__clk_enable(clk->parent_periph);
-
-		if (clk->ops && clk->ops->enable)
-			clk->ops->enable(clk);
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	if (--clk->enabled == 0) {
-		if (clk->ops && clk->ops->disable)
-			clk->ops->disable(clk);
-
-		if (clk->parent_periph)
-			__clk_disable(clk->parent_periph);
-
-		if (clk->parent_cluster)
-			__clk_disable(clk->parent_cluster);
-	}
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(!clk->enabled);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * The MTU has a separate, rather complex muxing setup
- * with alternative parents (peripheral cluster or
- * ULP or fixed 32768 Hz) depending on settings
- */
-static unsigned long clk_mtu_get_rate(struct clk *clk)
-{
-	void __iomem *addr;
-	u32 tcr;
-	int mtu = (int) clk->data;
-	/*
-	 * One of these is selected eventually
-	 * TODO: Replace the constant with a reference
-	 * to the ULP source once this is modeled.
-	 */
-	unsigned long clk32k = 32768;
-	unsigned long mturate;
-	unsigned long retclk;
-
-	if (cpu_is_u8500_family())
-		addr = __io_address(U8500_PRCMU_BASE);
-	else
-		ux500_unknown_soc();
-
-	/*
-	 * On a startup, always conifgure the TCR to the doze mode;
-	 * bootloaders do it for us. Do this in the kernel too.
-	 */
-	writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
-
-	tcr = readl(addr + PRCM_TCR);
-
-	/* Get the rate from the parent as a default */
-	if (clk->parent_periph)
-		mturate = clk_get_rate(clk->parent_periph);
-	else if (clk->parent_cluster)
-		mturate = clk_get_rate(clk->parent_cluster);
-	else
-		/* We need to be connected SOMEWHERE */
-		BUG();
-
-	/* Return the clock selected for this MTU */
-	if (tcr & (1 << mtu))
-		retclk = clk32k;
-	else
-		retclk = mturate;
-
-	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
-	return retclk;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	/*
-	 * If there is a custom getrate callback for this clock,
-	 * it will take precedence.
-	 */
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	if (clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	rate = clk->rate;
-	if (!rate) {
-		if (clk->parent_periph)
-			rate = clk_get_rate(clk->parent_periph);
-		else if (clk->parent_cluster)
-			rate = clk_get_rate(clk->parent_cluster);
-	}
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	/*TODO*/
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	/*TODO*/
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-static void clk_prcmu_enable(struct clk *clk)
-{
-	void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
-				   + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
-
-	writel(1 << clk->prcmu_cg_bit, cg_set_reg);
-}
-
-static void clk_prcmu_disable(struct clk *clk)
-{
-	void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
-				   + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
-
-	writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
-}
-
-static struct clkops clk_prcmu_ops = {
-	.enable = clk_prcmu_enable,
-	.disable = clk_prcmu_disable,
-};
-
-static unsigned int clkrst_base[] = {
-	[1] = U8500_CLKRST1_BASE,
-	[2] = U8500_CLKRST2_BASE,
-	[3] = U8500_CLKRST3_BASE,
-	[5] = U8500_CLKRST5_BASE,
-	[6] = U8500_CLKRST6_BASE,
-};
-
-static void clk_prcc_enable(struct clk *clk)
-{
-	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
-	if (clk->prcc_kernel != -1)
-		writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-
-	if (clk->prcc_bus != -1)
-		writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-}
-
-static void clk_prcc_disable(struct clk *clk)
-{
-	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
-	if (clk->prcc_bus != -1)
-		writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
-
-	if (clk->prcc_kernel != -1)
-		writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
-}
-
-static struct clkops clk_prcc_ops = {
-	.enable = clk_prcc_enable,
-	.disable = clk_prcc_disable,
-};
-
-static struct clk clk_32khz = {
-	.name =  "clk_32khz",
-	.rate = 32000,
-};
-
-/*
- * PRCMU level clock gating
- */
-
-/* Bank 0 */
-static DEFINE_PRCMU_CLK(svaclk,		0x0, 2, SVAMMDSPCLK);
-static DEFINE_PRCMU_CLK(siaclk,		0x0, 3, SIAMMDSPCLK);
-static DEFINE_PRCMU_CLK(sgaclk,		0x0, 4, SGACLK);
-static DEFINE_PRCMU_CLK_RATE(uartclk,	0x0, 5, UARTCLK, 38400000);
-static DEFINE_PRCMU_CLK(msp02clk,	0x0, 6, MSP02CLK);
-static DEFINE_PRCMU_CLK(msp1clk,	0x0, 7, MSP1CLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(i2cclk,	0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk,	0x0, 9, SDMMCCLK, 100000000);
-static DEFINE_PRCMU_CLK(slimclk,	0x0, 10, SLIMCLK);
-static DEFINE_PRCMU_CLK(per1clk,	0x0, 11, PER1CLK);
-static DEFINE_PRCMU_CLK(per2clk,	0x0, 12, PER2CLK);
-static DEFINE_PRCMU_CLK(per3clk,	0x0, 13, PER3CLK);
-static DEFINE_PRCMU_CLK(per5clk,	0x0, 14, PER5CLK);
-static DEFINE_PRCMU_CLK_RATE(per6clk,	0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK(lcdclk,		0x0, 17, LCDCLK);
-static DEFINE_PRCMU_CLK(bmlclk,		0x0, 18, BMLCLK);
-static DEFINE_PRCMU_CLK(hsitxclk,	0x0, 19, HSITXCLK);
-static DEFINE_PRCMU_CLK(hsirxclk,	0x0, 20, HSIRXCLK);
-static DEFINE_PRCMU_CLK(hdmiclk,	0x0, 21, HDMICLK);
-static DEFINE_PRCMU_CLK(apeatclk,	0x0, 22, APEATCLK);
-static DEFINE_PRCMU_CLK(apetraceclk,	0x0, 23, APETRACECLK);
-static DEFINE_PRCMU_CLK(mcdeclk,	0x0, 24, MCDECLK);
-static DEFINE_PRCMU_CLK(ipi2clk,	0x0, 25, IPI2CCLK);
-static DEFINE_PRCMU_CLK(dsialtclk,	0x0, 26, DSIALTCLK); /* v1 */
-static DEFINE_PRCMU_CLK(dmaclk,		0x0, 27, DMACLK);
-static DEFINE_PRCMU_CLK(b2r2clk,	0x0, 28, B2R2CLK);
-static DEFINE_PRCMU_CLK(tvclk,		0x0, 29, TVCLK);
-static DEFINE_PRCMU_CLK(uniproclk,	0x0, 30, UNIPROCLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(sspclk,	0x0, 31, SSPCLK, 48000000); /* v1 */
-
-/* Bank 1 */
-static DEFINE_PRCMU_CLK(rngclk,		0x4, 0, RNGCLK); /* v1 */
-static DEFINE_PRCMU_CLK(uiccclk,	0x4, 1, UICCCLK); /* v1 */
-
-/*
- * PRCC level clock gating
- * Format: per#, clk, PCKEN bit, KCKEN bit, parent
- */
-
-/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, msp3,		11, 10, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, i2c4,		10, 9, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, gpio0,	9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0,	8,  8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3,		7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2,		6,  6, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, sdi0,		5,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1,		4,  4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0,		3,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1,		2,  2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1,	1,  1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0,	0,  0, &clk_uartclk);
-
-/* Peripheral Cluster #2 */
-static DEFINE_PRCC_CLK(2, gpio1,	11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx,	10,  7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx,	 9,  6, NULL);
-static DEFINE_PRCC_CLK(2, spi0,		8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3,		7,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1,		6,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2,		5,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4,		4,  2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl,		3,  1, NULL);
-static DEFINE_PRCC_CLK(2, spi1,		2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2,		1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3,		0,  0, &clk_i2cclk);
-
-/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2,	8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5,		7,  7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2,	6,  6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske,		5,  5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2,		4,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0,		3,  3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1,		2,  2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0,		1,  1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc,		0, -1, NULL);
-
-/* Peripheral Cluster #4 is in the always on domain */
-
-/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3,	1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb,		0,  0, NULL);
-
-/* Peripheral Cluster #6 */
-
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg,	7,  7, NULL);
-static DEFINE_PRCC_CLK(6, hash1,	6, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro,	5,  1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka,		4, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0,	3, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0,	2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp1,    1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng,	0,  0, &clk_rngclk);
-
-static struct clk clk_dummy_apb_pclk = {
-	.name = "apb_pclk",
-};
-
-static struct clk_lookup u8500_clks[] = {
-	CLK(dummy_apb_pclk, NULL,	"apb_pclk"),
-
-	/* Peripheral Cluster #1 */
-	CLK(gpio0,	"gpio.0",	NULL),
-	CLK(gpio0,	"gpio.1",	NULL),
-	CLK(slimbus0,	"slimbus0",	NULL),
-	CLK(i2c2,	"nmk-i2c.2",	NULL),
-	CLK(sdi0,	"sdi0",		NULL),
-	CLK(msp0,	"ux500-msp-i2s.0",	NULL),
-	CLK(i2c1,	"nmk-i2c.1",	NULL),
-	CLK(uart1,	"uart1",	NULL),
-	CLK(uart0,	"uart0",	NULL),
-
-	/* Peripheral Cluster #3 */
-	CLK(gpio2,	"gpio.2",	NULL),
-	CLK(gpio2,	"gpio.3",	NULL),
-	CLK(gpio2,	"gpio.4",	NULL),
-	CLK(gpio2,	"gpio.5",	NULL),
-	CLK(sdi5,	"sdi5",		NULL),
-	CLK(uart2,	"uart2",	NULL),
-	CLK(ske,	"ske",		NULL),
-	CLK(ske,	"nmk-ske-keypad",	NULL),
-	CLK(sdi2,	"sdi2",		NULL),
-	CLK(i2c0,	"nmk-i2c.0",	NULL),
-	CLK(fsmc,	"fsmc",		NULL),
-
-	/* Peripheral Cluster #5 */
-	CLK(gpio3,	"gpio.8",	NULL),
-
-	/* Peripheral Cluster #6 */
-	CLK(hash1,	"hash1",	NULL),
-	CLK(pka,	"pka",		NULL),
-	CLK(hash0,	"hash0",	NULL),
-	CLK(cryp0,	"cryp0",	NULL),
-	CLK(cryp1,  "cryp1",    NULL),
-
-	/* PRCMU level clock gating */
-
-	/* Bank 0 */
-	CLK(svaclk,	"sva",		NULL),
-	CLK(siaclk,	"sia",		NULL),
-	CLK(sgaclk,	"sga",		NULL),
-	CLK(slimclk,	"slim",		NULL),
-	CLK(lcdclk,	"lcd",		NULL),
-	CLK(bmlclk,	"bml",		NULL),
-	CLK(hsitxclk,	"stm-hsi.0",	NULL),
-	CLK(hsirxclk,	"stm-hsi.1",	NULL),
-	CLK(hdmiclk,	"hdmi",		NULL),
-	CLK(apeatclk,	"apeat",	NULL),
-	CLK(apetraceclk,	"apetrace",	NULL),
-	CLK(mcdeclk,	"mcde",		NULL),
-	CLK(ipi2clk,	"ipi2",		NULL),
-	CLK(dmaclk,	"dma40.0",	NULL),
-	CLK(b2r2clk,	"b2r2",		NULL),
-	CLK(tvclk,	"tv",		NULL),
-
-	/* Peripheral Cluster #1 */
-	CLK(i2c4,	"nmk-i2c.4",	NULL),
-	CLK(spi3,	"spi3",		NULL),
-	CLK(msp1,	"ux500-msp-i2s.1",	NULL),
-	CLK(msp3,	"ux500-msp-i2s.3",	NULL),
-
-	/* Peripheral Cluster #2 */
-	CLK(gpio1,	"gpio.6",	NULL),
-	CLK(gpio1,	"gpio.7",	NULL),
-	CLK(ssitx,	"ssitx",	NULL),
-	CLK(ssirx,	"ssirx",	NULL),
-	CLK(spi0,	"spi0",		NULL),
-	CLK(sdi3,	"sdi3",		NULL),
-	CLK(sdi1,	"sdi1",		NULL),
-	CLK(msp2,	"ux500-msp-i2s.2",	NULL),
-	CLK(sdi4,	"sdi4",		NULL),
-	CLK(pwl,	"pwl",		NULL),
-	CLK(spi1,	"spi1",		NULL),
-	CLK(spi2,	"spi2",		NULL),
-	CLK(i2c3,	"nmk-i2c.3",	NULL),
-
-	/* Peripheral Cluster #3 */
-	CLK(ssp1,	"ssp1",		NULL),
-	CLK(ssp0,	"ssp0",		NULL),
-
-	/* Peripheral Cluster #5 */
-	CLK(usb,	"musb-ux500.0",	"usb"),
-
-	/* Peripheral Cluster #6 */
-	CLK(mtu1,	"mtu1",		NULL),
-	CLK(mtu0,	"mtu0",		NULL),
-	CLK(cfgreg,	"cfgreg",	NULL),
-	CLK(hash1,	"hash1",	NULL),
-	CLK(unipro,	"unipro",	NULL),
-	CLK(rng,	"rng",		NULL),
-
-	/* PRCMU level clock gating */
-
-	/* Bank 0 */
-	CLK(uniproclk,	"uniproclk",	NULL),
-	CLK(dsialtclk,	"dsialt",	NULL),
-
-	/* Bank 1 */
-	CLK(rngclk,	"rng",		NULL),
-	CLK(uiccclk,	"uicc",		NULL),
-};
-
-#ifdef CONFIG_DEBUG_FS
-/*
- *	debugfs support to trace clock tree hierarchy and attributes with
- *	powerdebug
- */
-static struct dentry *clk_debugfs_root;
-
-void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
-{
-	while (num--) {
-		/* Check that the clock has not been already registered */
-		if (!(cl->clk->list.prev != cl->clk->list.next))
-			list_add_tail(&cl->clk->list, &clk_list);
-
-		cl++;
-	}
-}
-
-static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
-						  size_t size, loff_t *off)
-{
-	struct clk *clk = file->f_dentry->d_inode->i_private;
-	char cusecount[128];
-	unsigned int len;
-
-	len = sprintf(cusecount, "%u\n", clk->enabled);
-	return simple_read_from_buffer(buf, size, off, cusecount, len);
-}
-
-static ssize_t rate_dbg_read(struct file *file, char __user *buf,
-					  size_t size, loff_t *off)
-{
-	struct clk *clk = file->f_dentry->d_inode->i_private;
-	char crate[128];
-	unsigned int rate;
-	unsigned int len;
-
-	rate = clk_get_rate(clk);
-	len = sprintf(crate, "%u\n", rate);
-	return simple_read_from_buffer(buf, size, off, crate, len);
-}
-
-static const struct file_operations usecount_fops = {
-	.read = usecount_dbg_read,
-};
-
-static const struct file_operations set_rate_fops = {
-	.read = rate_dbg_read,
-};
-
-static struct dentry *clk_debugfs_register_dir(struct clk *c,
-						struct dentry *p_dentry)
-{
-	struct dentry *d, *clk_d;
-	const char *p = c->name;
-
-	if (!p)
-		p = "BUG";
-
-	clk_d = debugfs_create_dir(p, p_dentry);
-	if (!clk_d)
-		return NULL;
-
-	d = debugfs_create_file("usecount", S_IRUGO,
-				clk_d, c, &usecount_fops);
-	if (!d)
-		goto err_out;
-	d = debugfs_create_file("rate", S_IRUGO,
-				clk_d, c, &set_rate_fops);
-	if (!d)
-		goto err_out;
-	/*
-	 * TODO : not currently available in ux500
-	 * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
-	 * if (!d)
-	 *	goto err_out;
-	 */
-
-	return clk_d;
-
-err_out:
-	debugfs_remove_recursive(clk_d);
-	return NULL;
-}
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	struct clk *pa = c->parent_periph;
-	struct clk *bpa = c->parent_cluster;
-
-	if (!(bpa && !pa)) {
-		c->dent = clk_debugfs_register_dir(c,
-				pa ? pa->dent : clk_debugfs_root);
-		if (!c->dent)
-			return -ENOMEM;
-	}
-
-	if (bpa) {
-		c->dent_bus = clk_debugfs_register_dir(c,
-				bpa->dent_bus ? bpa->dent_bus : bpa->dent);
-		if ((!c->dent_bus) &&  (c->dent)) {
-			debugfs_remove_recursive(c->dent);
-			c->dent = NULL;
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent_periph;
-	struct clk *bpa = c->parent_cluster;
-
-	if (pa && (!pa->dent && !pa->dent_bus)) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (bpa && (!bpa->dent && !bpa->dent_bus)) {
-		err = clk_debugfs_register(bpa);
-		if (err)
-			return err;
-	}
-
-	if ((!c->dent) && (!c->dent_bus)) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clk_list, list) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-
-#endif /* defined(CONFIG_DEBUG_FS) */
-
-unsigned long clk_smp_twd_rate = 500000000;
-
-unsigned long clk_smp_twd_get_rate(struct clk *clk)
-{
-	return clk_smp_twd_rate;
-}
-
-static struct clk clk_smp_twd = {
-	.get_rate = clk_smp_twd_get_rate,
-	.name =  "smp_twd",
-};
-
-static struct clk_lookup clk_smp_twd_lookup = {
-	.dev_id = "smp_twd",
-	.clk = &clk_smp_twd,
-};
-
-#ifdef CONFIG_CPU_FREQ
-
-static int clk_twd_cpufreq_transition(struct notifier_block *nb,
-				      unsigned long state, void *data)
-{
-	struct cpufreq_freqs *f = data;
-
-	if (state == CPUFREQ_PRECHANGE) {
-		/* Save frequency in simple Hz */
-		clk_smp_twd_rate = (f->new * 1000) / 2;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block clk_twd_cpufreq_nb = {
-	.notifier_call = clk_twd_cpufreq_transition,
-};
-
-int clk_init_smp_twd_cpufreq(void)
-{
-	return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#endif
-
-int __init clk_init(void)
-{
-	clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-	clkdev_add(&clk_smp_twd_lookup);
-
-#ifdef CONFIG_DEBUG_FS
-	clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-#endif
-	return 0;
-}
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
deleted file mode 100644
index 65d27a13f46..00000000000
--- a/arch/arm/mach-ux500/clock.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  Copyright (C) 2010 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/**
- * struct clkops - ux500 clock operations
- * @enable:	function to enable the clock
- * @disable:	function to disable the clock
- * @get_rate:	function to get the current clock rate
- *
- * This structure contains function pointers to functions that will be used to
- * control the clock.  All of these functions are optional.  If get_rate is
- * NULL, the rate in the struct clk will be used.
- */
-struct clkops {
-	void (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-	unsigned long (*get_rate) (struct clk *);
-	int (*set_parent)(struct clk *, struct clk *);
-};
-
-/**
- * struct clk - ux500 clock structure
- * @ops:		pointer to clkops struct used to control this clock
- * @name:		name, for debugging
- * @enabled:		refcount. positive if enabled, zero if disabled
- * @get_rate:		custom callback for getting the clock rate
- * @data:		custom per-clock data for example for the get_rate
- *			callback
- * @rate:		fixed rate for clocks which don't implement
- * 			ops->getrate
- * @prcmu_cg_off:	address offset of the combined enable/disable register
- * 			(used on u8500v1)
- * @prcmu_cg_bit:	bit in the combined enable/disable register (used on
- * 			u8500v1)
- * @prcmu_cg_mgt:	address of the enable/disable register (used on
- * 			u8500ed)
- * @cluster:		peripheral cluster number
- * @prcc_bus:		bit for the bus clock in the peripheral's CLKRST
- * @prcc_kernel:	bit for the kernel clock in the peripheral's CLKRST.
- * 			-1 if no kernel clock exists.
- * @parent_cluster:	pointer to parent's cluster clk struct
- * @parent_periph:	pointer to parent's peripheral clk struct
- *
- * Peripherals are organised into clusters, and each cluster has an associated
- * bus clock.  Some peripherals also have a parent peripheral clock.
- *
- * In order to enable a clock for a peripheral, we need to enable:
- * 	(1) the parent cluster (bus) clock at the PRCMU level
- * 	(2) the parent peripheral clock (if any) at the PRCMU level
- * 	(3) the peripheral's bus & kernel clock at the PRCC level
- *
- * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
- * of the cluster and peripheral clocks, and hooking these as the parents of
- * the individual peripheral clocks.
- *
- * (3) is handled by specifying the bits in the PRCC control registers required
- * to enable these clocks and modifying them in the ->enable and
- * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
- *
- * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
- * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
- * prcc, and parent pointers are only used for the PRCC-level clocks.
- */
-struct clk {
-	const struct clkops	*ops;
-	const char 		*name;
-	unsigned int		enabled;
-	unsigned long		(*get_rate)(struct clk *);
-	void			*data;
-
-	unsigned long		rate;
-	struct list_head	list;
-
-	/* These three are only for PRCMU clks */
-
-	unsigned int		prcmu_cg_off;
-	unsigned int		prcmu_cg_bit;
-	unsigned int		prcmu_cg_mgt;
-
-	/* The rest are only for PRCC clks */
-
-	int			cluster;
-	unsigned int		prcc_bus;
-	unsigned int		prcc_kernel;
-
-	struct clk		*parent_cluster;
-	struct clk		*parent_periph;
-#if defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;		/* For visible tree hierarchy */
-	struct dentry		*dent_bus;	/* For visible tree hierarchy */
-#endif
-};
-
-#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)		\
-struct clk clk_##_name = {					\
-		.name		= #_name,			\
-		.ops    	= &clk_prcmu_ops, 		\
-		.prcmu_cg_off	= _cg_off, 			\
-		.prcmu_cg_bit	= _cg_bit,			\
-		.prcmu_cg_mgt	= PRCM_##_reg##_MGT		\
-	}
-
-#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate)	\
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops    	= &clk_prcmu_ops, 			\
-		.prcmu_cg_off	= _cg_off, 				\
-		.prcmu_cg_bit	= _cg_bit,				\
-		.rate		= _rate,				\
-		.prcmu_cg_mgt	= PRCM_##_reg##_MGT			\
-	}
-
-#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk)	\
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops    	= &clk_prcc_ops, 			\
-		.cluster 	= _pclust,				\
-		.prcc_bus 	= _bus_en, 				\
-		.prcc_kernel 	= _kernel_en, 				\
-		.parent_cluster = &clk_per##_pclust##clk,		\
-		.parent_periph 	= _kernclk				\
-	}
-
-#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops		= &clk_prcc_ops,			\
-		.cluster	= _pclust,				\
-		.prcc_bus	= _bus_en,				\
-		.prcc_kernel	= _kernel_en,				\
-		.parent_cluster = &clk_per##_pclust##clk,		\
-		.parent_periph	= _kernclk,				\
-		.get_rate	= _callback,				\
-		.data		= (void *) _data			\
-	}
-
-
-#define CLK(_clk, _devname, _conname)			\
-	{						\
-		.clk	= &clk_##_clk,			\
-		.dev_id	= _devname,			\
-		.con_id = _conname,			\
-	}
-
-int __init clk_db8500_ed_fixup(void);
-int __init clk_init(void);
-
-#ifdef CONFIG_DEBUG_FS
-int clk_debugfs_init(void);
-#else
-static inline int clk_debugfs_init(void) { return 0; }
-#endif
-
-#ifdef CONFIG_CPU_FREQ
-int clk_init_smp_twd_cpufreq(void);
-#else
-static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
-#endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index db3c52d56ca..bcdfe6b1d45 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -18,13 +18,13 @@
 #include <linux/io.h>
 #include <linux/mfd/abx500/ab8500.h>
 
-#include <asm/mach/map.h>
 #include <asm/pmu.h>
+#include <asm/mach/map.h>
 #include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
 #include <mach/db8500-regs.h>
 
 #include "devices-db8500.h"
@@ -80,7 +80,7 @@ void __init u8500_map_io(void)
 
 	iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
 
-	if (cpu_is_u9540())
+	if (cpu_is_ux540_family())
 		iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
 	else
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
@@ -122,7 +122,7 @@ struct arm_pmu_platdata db8500_pmu_platdata = {
 
 static struct platform_device db8500_pmu_device = {
 	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
+	.id			= -1,
 	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
 	.resource		= db8500_pmu_resources,
 	.dev.platform_data	= &db8500_pmu_platdata,
@@ -138,10 +138,6 @@ static struct platform_device *platform_devs[] __initdata = {
 	&db8500_prcmu_device,
 };
 
-static struct platform_device *of_platform_devs[] __initdata = {
-	&u8500_dma40_device,
-};
-
 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
@@ -235,7 +231,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
 struct device * __init u8500_of_init_devices(void)
 {
 	struct device *parent;
-	int i;
 
 	parent = db8500_soc_device_init();
 
@@ -244,8 +239,7 @@ struct device * __init u8500_of_init_devices(void)
 	platform_device_register_data(parent,
 		"cpufreq-u8500", -1, NULL, 0);
 
-	for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++)
-		of_platform_devs[i]->dev.parent = parent;
+	u8500_dma40_device.dev.parent = parent;
 
 	/*
 	 * Devices to be DT:ed:
@@ -253,7 +247,7 @@ struct device * __init u8500_of_init_devices(void)
 	 *   db8500_pmu_device   = done
 	 *   db8500_prcmu_device = done
 	 */
-	platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));
+	platform_device_register(&u8500_dma40_device);
 
 	return parent;
 }
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e2360e7c770..2236cbd03cd 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,7 +8,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
@@ -17,6 +16,7 @@
 #include <linux/stat.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/platform_data/clk-ux500.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -25,8 +25,6 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 
-#include "clock.h"
-
 void __iomem *_PRCMU_BASE;
 
 /*
@@ -51,7 +49,9 @@ void __init ux500_init_irq(void)
 	void __iomem *dist_base;
 	void __iomem *cpu_base;
 
-	if (cpu_is_u8500_family()) {
+	gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
+
+	if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
 		dist_base = __io_address(U8500_GIC_DIST_BASE);
 		cpu_base = __io_address(U8500_GIC_CPU_BASE);
 	} else
@@ -70,13 +70,17 @@ void __init ux500_init_irq(void)
 	 */
 	if (cpu_is_u8500_family())
 		db8500_prcmu_early_init();
-	clk_init();
+
+	if (cpu_is_u8500_family())
+		u8500_clk_init();
+	else if (cpu_is_u9540())
+		u9540_clk_init();
+	else if (cpu_is_u8540())
+		u8540_clk_init();
 }
 
 void __init ux500_init_late(void)
 {
-	clk_debugfs_init();
-	clk_init_smp_twd_cpufreq();
 }
 
 static const char * __init ux500_get_machine(void)
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index ecdd8386cff..7fbf0ba336e 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -13,7 +13,7 @@
 #include <linux/sys_soc.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_data/i2c-nomadik.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
 
 struct spi_master_cntlr;
 
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index c76f0f456f0..2f6af259015 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -15,13 +15,18 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
-extern volatile int pen_release;
+#include <mach/setup.h>
 
-static inline void platform_do_lowpower(unsigned int cpu)
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref ux500_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
-	/* we put the platform to just WFI */
+	/* directly enter low power state, skipping secure registers */
 	for (;;) {
 		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
 				: : : "memory");
@@ -33,28 +38,3 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		}
 	}
 }
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	/* directly enter low power state, skipping secure registers */
-	platform_do_lowpower(cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-ux500/include/mach/crypto-ux500.h b/arch/arm/mach-ux500/include/mach/crypto-ux500.h
deleted file mode 100644
index 5b2d0817e26..00000000000
--- a/arch/arm/mach-ux500/include/mach/crypto-ux500.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef _CRYPTO_UX500_H
-#define _CRYPTO_UX500_H
-#include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
-
-struct hash_platform_data {
-	void *mem_to_engine;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-struct cryp_platform_data {
-	struct stedma40_chan_cfg mem_to_engine;
-	struct stedma40_chan_cfg engine_to_mem;
-};
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
deleted file mode 100644
index c01ef66537f..00000000000
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index c6e2db9e9e5..9c42642ab16 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -41,43 +41,29 @@ static inline bool __attribute_const__ cpu_is_u8500(void)
 	return dbx500_partnumber() == 0x8500;
 }
 
-static inline bool __attribute_const__ cpu_is_u9540(void)
+static inline bool __attribute_const__ cpu_is_u8520(void)
 {
-	return dbx500_partnumber() == 0x9540;
+	return dbx500_partnumber() == 0x8520;
 }
 
 static inline bool cpu_is_u8500_family(void)
 {
-	return cpu_is_u8500() || cpu_is_u9540();
-}
-
-static inline bool __attribute_const__ cpu_is_u5500(void)
-{
-	return dbx500_partnumber() == 0x5500;
-}
-
-/*
- * 5500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u5500v1(void)
-{
-	return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0;
+	return cpu_is_u8500() || cpu_is_u8520();
 }
 
-static inline bool __attribute_const__ cpu_is_u5500v2(void)
+static inline bool __attribute_const__ cpu_is_u9540(void)
 {
-	return (dbx500_id.revision & 0xf0) == 0xB0;
+	return dbx500_partnumber() == 0x9540;
 }
 
-static inline bool __attribute_const__ cpu_is_u5500v20(void)
+static inline bool __attribute_const__ cpu_is_u8540(void)
 {
-	return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0);
+	return dbx500_partnumber() == 0x8540;
 }
 
-static inline bool __attribute_const__ cpu_is_u5500v21(void)
+static inline bool cpu_is_ux540_family(void)
 {
-	return cpu_is_u5500() && (dbx500_revision() == 0xB1);
+	return cpu_is_u9540() || cpu_is_u8540();
 }
 
 /*
@@ -119,14 +105,14 @@ static inline bool cpu_is_u8500v21(void)
 	return cpu_is_u8500() && (dbx500_revision() == 0xB1);
 }
 
+static inline bool cpu_is_u8500v22(void)
+{
+	return cpu_is_u8500() && (dbx500_revision() == 0xB2);
+}
+
 static inline bool cpu_is_u8500v20_or_later(void)
 {
-	/*
-	 * U9540 has so much in common with U8500 that is is considered a
-	 * U8500 variant.
-	 */
-	return cpu_is_u9540() ||
-		(cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
+	return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
 }
 
 static inline bool ux500_is_svp(void)
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 798be19129e..3cc7142eee0 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -22,8 +22,6 @@ struct msp_i2s_platform_data {
 	enum msp_i2s_id id;
 	struct stedma40_chan_cfg *msp_i2s_dma_rx;
 	struct stedma40_chan_cfg *msp_i2s_dma_tx;
-	int (*msp_i2s_init) (void);
-	int (*msp_i2s_exit) (void);
 };
 
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 7914e5eaa9c..6be4c4d2ab8 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -45,4 +45,7 @@ extern struct sys_timer ux500_timer;
 	.type		= MT_MEMORY,		\
 }
 
+extern struct smp_operations ux500_smp_ops;
+extern void ux500_cpu_die(unsigned int cpu);
+
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 34775baadae..d60ecd1753f 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -24,7 +24,7 @@
 #include <linux/amba/serial.h>
 #include <mach/hardware.h>
 
-u32 ux500_uart_base;
+void __iomem *ux500_uart_base;
 
 static void putc(const char c)
 {
@@ -51,7 +51,7 @@ static void flush(void)
 static inline void arch_decomp_setup(void)
 {
 	/* Use machine_is_foo() macro if you need to switch base someday */
-	ux500_uart_base = U8500_UART2_BASE;
+	ux500_uart_base = (void __iomem *)U8500_UART2_BASE;
 }
 
 #define arch_decomp_wdog() /* nothing to do here */
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
deleted file mode 100644
index 4c1cc50a595..00000000000
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-#include <linux/dmaengine.h>
-
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
-
-struct ux500_musb_board_data {
-	void	**dma_rx_param_array;
-	void	**dma_tx_param_array;
-	u32	num_rx_channels;
-	u32	num_tx_channels;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-void ux500_add_usb(struct device *parent, resource_size_t base,
-		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index da1d5ad5bd4..3db7782f3af 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -28,12 +28,6 @@
 extern void u8500_secondary_startup(void);
 
 /*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int pen_release = -1;
-
-/*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
@@ -48,7 +42,7 @@ static void write_pen_release(int val)
 
 static void __iomem *scu_base_addr(void)
 {
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		return __io_address(U8500_SCU_BASE);
 	else
 		ux500_unknown_soc();
@@ -58,7 +52,7 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit ux500_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -80,7 +74,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
@@ -118,7 +112,7 @@ static void __init wakeup_secondary(void)
 {
 	void __iomem *backupram;
 
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		backupram = __io_address(U8500_BACKUPRAM0_BASE);
 	else
 		ux500_unknown_soc();
@@ -145,7 +139,7 @@ static void __init wakeup_secondary(void)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init ux500_smp_init_cpus(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
@@ -165,9 +159,19 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 {
 
 	scu_enable(scu_base_addr());
 	wakeup_secondary();
 }
+
+struct smp_operations ux500_smp_ops __initdata = {
+	.smp_init_cpus		= ux500_smp_init_cpus,
+	.smp_prepare_cpus	= ux500_smp_prepare_cpus,
+	.smp_secondary_init	= ux500_secondary_init,
+	.smp_boot_secondary	= ux500_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= ux500_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 66e7f00884a..6f39731951b 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -54,7 +54,7 @@ static void __init ux500_timer_init(void)
 	void __iomem *tmp_base;
 	struct device_node *np;
 
-	if (cpu_is_u8500_family()) {
+	if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
 		mtu_timer_base = __io_address(U8500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
 	} else {
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index a74af389bc6..145482e7441 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -10,7 +10,7 @@
 
 #include <plat/ste_dma40.h>
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \