diff options
| author | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2012-07-02 11:30:34 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2012-07-04 09:38:29 +0200 |
| commit | c520c921eacdced7e2095ba6cbbb9921906c7b67 (patch) | |
| tree | 0e332356faa6f90fb94afc7d39a5723e31519d30 | |
| parent | 396c89b327269c5a90bdd6152b5339e4cd2b8e73 (diff) | |
ARM: imx: assert SCC gate stays enabled
The SCC clock is needed in internal boot mode and so must keep enabled.
This same issue was fixed for the pre-common-clk code in commit
3d6e614 (mx35: Fix boot ROM hang in internal boot mode)
Cc: John Ogness <jogness@linutronix.de>
Cc: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| -rw-r--r-- | arch/arm/mach-imx/clk-imx35.c | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 920a8cc4272..c6422fb10ba 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -201,7 +201,6 @@ int __init mx35_clocks_init() pr_err("i.MX35 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); @@ -264,6 +263,14 @@ int __init mx35_clocks_init() clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + /* + * SCC is needed to boot via mmc after a watchdog reset. The clock code + * before conversion to common clk also enabled UART1 (which isn't + * handled here and not needed for mmc) and IIM (which is enabled + * unconditionally above). + */ + clk_prepare_enable(clk[scc_gate]); + imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT |