summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2022-02-02irqchip/sifive-plic: Add missing thead,c900-plic match stringGuo Ren1-0/+1
The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi). Qute opensbi patch commit-msg by Samuel: The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver. [1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6 Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Anup Patel <anup@brainfault.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org
2022-02-02irqchip/gic-v3-its: Skip HP notifier when no ITS is registeredMarc Zyngier1-0/+3
We have some systems out there that have both LPI support and an ITS, but that don't expose the ITS in their firmware tables (either because it is broken or because they run under a hypervisor that hides it...). Is such a configuration, we still register the HP notifier to free the allocated tables if needed, resulting in a warning as there is no memory to free (nothing was allocated the first place). Fix it by keying the HP notifier on the presence of at least one sucessfully probed ITS. Fixes: d23bc2bc1d63 ("irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve") Reported-by: Steev Klimaszewski <steev@kali.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20220202103454.2480465-1-maz@kernel.org
2022-01-29Merge tag 'irqchip-fixes-5.17-1' of ↵Thomas Gleixner4-30/+114
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
2022-01-26irqchip/gic-v3-its: Reset each ITS's BASERn register before probeMarc Zyngier1-21/+99
A recent bug report outlined that the way GICv4.1 is handled across kexec is pretty bad. We can end-up in a situation where ITSs share memory (this is the case when SVPET==1) and reprogram the base registers, creating a situation where ITSs that are part of a given affinity group see different pointers. Which is illegal. Boo. In order to restore some sanity, reset the BASERn registers to 0 *before* probing any ITS. Although this isn't optimised at all, this is only a once-per-boot cost, which shouldn't show up on anyone's radar. Cc: Jay Chen <jkchen@linux.alibaba.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20211216190315.GA14220@lpieralisi Link: https://lore.kernel.org/r/20220124133809.1291195-1-maz@kernel.org
2022-01-22irqchip/gic-v3-its: Fix build for !SMPArd Biesheuvel1-1/+2
Commit 835f442fdbce ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") added a reference to cpus_booted_once_mask, which does not exist on !SMP builds, breaking the build for such configurations. Given the intent of the check, short circuit it to always pass. Cc: Valentin Schneider <valentin.schneider@arm.com> Fixes: 835f442fdbce ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220122151614.133766-1-ardb@kernel.org
2022-01-17irqchip/loongson-pch-ms: Use bitmap_free() to free bitmapChristophe JAILLET1-1/+1
kfree() and bitmap_free() are the same. But using the latter is more consistent when freeing memory allocated with bitmap_zalloc(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/0b982ab54844803049c217b2899baa59602faacd.1640529916.git.christophe.jaillet@wanadoo.fr
2022-01-17irqchip/realtek-rtl: Service all pending interruptsSander Vanheule1-2/+6
Instead of only servicing the lowest pending interrupt line, make sure all pending SoC interrupts are serviced before exiting the chained handler. This adds a small overhead if only one interrupt is pending, but should prevent rapid re-triggering of the handler. Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
2022-01-17irqchip/realtek-rtl: Fix off-by-one in routingSander Vanheule1-3/+5
There is an offset between routing values (1..6) and the connected MIPS CPU interrupts (2..7), but no distinction was made between these two values. This issue was previously hidden during testing, because an interrupt mapping was used where for each required interrupt another (unused) routing was configured, with an offset of +1. Offset the CPU IRQ numbers by -1 to retrieve the correct routing value. Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/177b920aa8d8610615692d0e657e509f363c85ca.1641739718.git.sander@svanheule.net
2022-01-17irqchip/realtek-rtl: Map control data to virqSander Vanheule1-1/+1
The driver assigned the irqchip and irq handler to the hardware irq, instead of the virq. This is incorrect, and only worked because these irq numbers happened to be the same on the devices used for testing the original driver. Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/4b4936606480265db47df152f00bc2ed46340599.1641739718.git.sander@svanheule.net
2022-01-17irqchip/apple-aic: Drop unused ipi_hwirq fieldMarc Zyngier1-1/+0
This field was never used, remove it. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220108140118.3378937-1-maz@kernel.org
2022-01-13Merge tag 'irq-msi-2022-01-13' of ↵Linus Torvalds6-12/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq updates from Thomas Gleixner: "Rework of the MSI interrupt infrastructure. This is a treewide cleanup and consolidation of MSI interrupt handling in preparation for further changes in this area which are necessary to: - address existing shortcomings in the VFIO area - support the upcoming Interrupt Message Store functionality which decouples the message store from the PCI config/MMIO space" * tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) genirq/msi: Populate sysfs entry only once PCI/MSI: Unbreak pci_irq_get_affinity() genirq/msi: Convert storage to xarray genirq/msi: Simplify sysfs handling genirq/msi: Add abuse prevention comment to msi header genirq/msi: Mop up old interfaces genirq/msi: Convert to new functions genirq/msi: Make interrupt allocation less convoluted platform-msi: Simplify platform device MSI code platform-msi: Let core code handle MSI descriptors bus: fsl-mc-msi: Simplify MSI descriptor handling soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs() soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation NTB/msi: Convert to msi_on_each_desc() PCI: hv: Rework MSI handling powerpc/mpic_u3msi: Use msi_for_each-desc() powerpc/fsl_msi: Use msi_for_each_desc() powerpc/pasemi/msi: Convert to msi_on_each_dec() powerpc/cell/axon_msi: Convert to msi_on_each_desc() powerpc/4xx/hsta: Rework MSI handling ...
2022-01-10Merge tag 'irqchip-5.17' of ↵Thomas Gleixner8-18/+109
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Fix GICv3 redistributor table reservation with RT across kexec - Fix GICv4.1 redistributor view of the VPE table across kexec - Add support for extra interrupts on spear-shirq - Make obtaining some interrupts optional for the Renesas drivers - Various cleanups and bug fixes Link: https://lore.kernel.org/lkml/20220108130807.4109738-1-maz@kernel.org
2021-12-20Merge branch irq/misc-5.17 into irq/irqchip-nextMarc Zyngier7-11/+33
* irq/misc-5.17: : . : Misc irqchip fixes: : : - Disable GICv4.1 RD's VPE table at boot time to avoid RAS errors : - Fix Ingenic TCU's u32/unsigned long abuse : - Some GICv2m constifying : - Mark imx_gpcv2_instance as __ro_after_init : - Enable a few missing IRQs on Spear : - Conversion to platform_get_irq_optional() for the Renesas irqchips : . irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time irqchip/ingenic-tcu: Use correctly sized arguments for bit field irqchip/gic-v2m: Add const to of_device_id irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init irqchip/spear-shirq: Add support for IRQ 0..6 Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-12-20irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the ↵Lad Prabhakar1-4/+5
interrupt platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211216182121.5323-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2021-12-20irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interruptLad Prabhakar1-4/+5
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211216182121.5323-2-prabhakar.mahadev-lad.rj@bp.renesas.com
2021-12-16soc: ti: ti_sci_inta_msi: Use msi_desc::msi_indexThomas Gleixner1-1/+1
Use the common msi_index member and get rid of the pointless wrapper struct. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20211210221814.540704224@linutronix.de
2021-12-16platform-msi: Rename functions and clarify commentsThomas Gleixner2-5/+5
It's hard to distinguish what platform_msi_domain_alloc() and platform_msi_domain_alloc_irqs() are about. Make the distinction more explicit and add comments which explain the use cases properly. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211210221814.228706214@linutronix.de
2021-12-16device: Move MSI related data into a structThomas Gleixner1-3/+3
The only unconditional part of MSI data in struct device is the irqdomain pointer. Everything else can be allocated on demand. Create a data structure and move the irqdomain pointer into it. The other MSI specific parts are going to be removed from struct device in later steps. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211210221813.617178827@linutronix.de
2021-12-16irqchip/gic-v4: Disable redistributors' view of the VPE table at boot timeMarc Zyngier1-0/+16
Jay Chen reported that using a kdump kernel on a GICv4.1 system results in a RAS error being delivered when the secondary kernel configures the ITS's view of the new VPE table. As it turns out, that's because each RD still has a pointer to the previous instance of the VPE table, and that particular implementation is very upset by seeing two bits of the HW that should point to the same table with different values. To solve this, let's invalidate any reference that any RD has to the VPE table when discovering the RDs. The ITS can then be programmed as expected. Reported-by: Jay Chen <jkchen@linux.alibaba.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20211214064716.21407-1-jkchen@linux.alibaba.com Link: https://lore.kernel.org/r/20211216144804.1578566-1-maz@kernel.org
2021-12-16irqchip/ingenic-tcu: Use correctly sized arguments for bit fieldKees Cook1-1/+3
The find.h APIs are designed to be used only on unsigned long arguments. This can technically result in a over-read, but it is harmless in this case. Regardless, fix it to avoid the warning seen under -Warray-bounds, which we'd like to enable globally: In file included from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./include/linux/smp.h:13, from ./include/linux/lockdep.h:14, from ./include/linux/mutex.h:17, from ./include/linux/notifier.h:14, from ./include/linux/clk.h:14, from drivers/irqchip/irq-ingenic-tcu.c:7: drivers/irqchip/irq-ingenic-tcu.c: In function 'ingenic_tcu_intc_cascade': ./include/linux/find.h:40:23: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'uint32_t[1]' {aka 'unsigned int[1]'} [-Warray-bounds] 40 | val = *addr & GENMASK(size - 1, offset); | ^~~~~ drivers/irqchip/irq-ingenic-tcu.c:30:18: note: while referencing 'irq_reg' 30 | uint32_t irq_reg, irq_mask; | ^~~~~~~ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215232457.2069969-1-keescook@chromium.org
2021-12-16irqchip/gic-v2m: Add const to of_device_idXiang wangx1-1/+1
struct of_device_id should normally be const. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211209132453.25623-1-wangxiang@cdjrlc.com
2021-12-16irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_initPeng Fan1-1/+1
imx_gpcv2_instance will not be updated after init, so mark it with __ro_after_init. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211214084711.1357325-1-peng.fan@oss.nxp.com
2021-12-16irqchip/spear-shirq: Add support for IRQ 0..6Herve Codina1-0/+2
IRQ 0..7 are not supported by the driver for SPEAr320 SOC family. IRQ 0 is not reserved in SPEAr320 SOC (assigned to GPIOINT). Furthermore, in SPEAr320s SOC variant, IRQ 0..6 are assigned as follow: IRQ 6 - NGPIO_INTR: Combined status of edge programmable interrupts from GPIO ports IRQ 5 - TX_OR_INTR: I2S interrupt on Transmit FIFO overrun IRQ 4 - TX_EMP_INTR: I2S interrupt on Transmit FIFO empty IRQ 3 - RX_OR_INTR: I2S interrupt on Receive FIFO overrun IRQ 2 - RX_DA_INTR: I2S interrupt on data available in Receive FIFO IRQ 1 - Reserved IRQ 0 - GPIO_INTR: Legacy interrupt from GPIO ports Add support for these IRQs in SPEAr320 SOC family. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211202095255.165797-6-herve.codina@bootlin.com
2021-12-16irqchip/gic-v3-its: Limit memreserve cpuhp state lifetimeValentin Schneider1-0/+16
The new memreserve cpuhp callback only needs to survive up until a point where every CPU in the system has booted once. Beyond that, it becomes a no-op and can be put in the bin. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211027151506.2085066-4-valentin.schneider@arm.com
2021-12-16irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserveValentin Schneider2-4/+55
Memory used by the LPI tables have to be made persistent for kexec to have a chance to work, as explained in [1]. If they have been made persistent and we are booting into a kexec'd kernel, we also need to free the pages that were preemptively allocated by the new kernel for those tables. Both of those operations currently happen during its_cpu_init(), which happens in a _STARTING (IOW atomic) cpuhp callback for secondary CPUs. efi_mem_reserve_iomem() issues a GFP_ATOMIC allocation, which unfortunately doesn't work under PREEMPT_RT (this ends up grabbing a non-raw spinlock, which can sleep under PREEMPT_RT). Similarly, freeing the pages ends up grabbing a sleepable spinlock. Since the memreserve is only required by kexec, it doesn't have to be done so early in the secondary boot process. Issue the reservation in a new CPUHP_AP_ONLINE_DYN cpuhp callback, and piggy-back the page freeing on top of it. A CPU gets to run the body of this new callback exactly once. As kexec issues a machine_shutdown() prior to machine_kexec(), it will be serialized vs a CPU being plugged to life by the hotplug machinery - either the CPU will have been brought up and have had its redistributor's pending table memreserved, or it never went online and will have its table allocated by the new kernel. [1]: https://lore.kernel.org/lkml/20180921195954.21574-1-marc.zyngier@arm.com/ Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211027151506.2085066-3-valentin.schneider@arm.com
2021-12-16irqchip/gic-v3-its: Give the percpu rdist struct its own flags fieldValentin Schneider1-3/+5
Later patches will require tracking some per-rdist status. Reuse the bytes "lost" to padding within the __percpu rdist struct as a flags field, and re-encode ->lpi_enabled within said flags. No change in functionality intended. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211027151506.2085066-2-valentin.schneider@arm.com
2021-12-14Merge branch 'irq/urgent' into irq/msiThomas Gleixner7-17/+14
to pick up the PCI/MSI-x fixes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2021-12-10irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node()Ye Guojin1-0/+1
This was found by coccicheck: ./drivers/irqchip/irq-bcm7120-l2.c,328,1-7,ERROR missing put_device; call of_find_device_by_node on line 234, but without a corresponding object release within this function. ./drivers/irqchip/irq-bcm7120-l2.c,341,1-7,ERROR missing put_device; call of_find_device_by_node on line 234, but without a corresponding object release within this function. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109055958.130287-1-ye.guojin@zte.com.cn
2021-12-09PCI/MSI: Make pci_msi_domain_write_msg() staticThomas Gleixner3-3/+0
There is no point to have this function public as it is set by the PCI core anyway when a PCI/MSI irqdomain is created. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI Link: https://lore.kernel.org/r/20211206210224.157070464@linutronix.de
2021-12-08irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALLWudi Wang1-1/+1
INVALL CMD specifies that the ITS must ensure any caching associated with the interrupt collection defined by ICID is consistent with the LPI configuration tables held in memory for all Redistributors. SYNC is required to ensure that INVALL is executed. Currently, LPI configuration data may be inconsistent with that in the memory within a short period of time after the INVALL command is executed. Signed-off-by: Wudi Wang <wangwudi@hisilicon.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com
2021-12-07irqchip/apple-aic: Mark aic_init_smp() as __initDonghyeok Kim1-1/+1
This function is only called from the driver init code. Signed-off-by: Donghyeok Kim <dthex5d@gmail.com> Acked-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211204164228.5920-1-dthex5d@gmail.com
2021-12-02irqchip: nvic: Fix offset for Interrupt Priority OffsetsVladimir Murzin1-1/+1
According to ARM(v7M) ARM Interrupt Priority Offsets located at 0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only Interrupt Active Bit Registers Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com
2021-11-25irqchip/mips-gic: Use bitfield helpersGeert Uytterhoeven1-2/+2
Use the FIELD_GET() helper, instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/all/74f9d126961a90d3e311b92a54870eaac5b3ae57.1637593297.git.geert+renesas@glider.be
2021-11-25irqchip/aspeed-scu: Replace update_bits with write_bits.Billy Tsai1-2/+2
The interrupt status bits are cleared by writing 1, we should force a write to clear the interrupt without checking if the value has changed. Fixes: 04f605906ff0 ("irqchip: Add Aspeed SCU interrupt controller") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211124094348.11621-1-billy_tsai@aspeedtech.com Cc: stable@vger.kernel.org
2021-11-25irqchip/armada-370-xp: Fix support for Multi-MSI interruptsPali Rohár1-9/+5
irq-armada-370-xp driver already sets MSI_FLAG_MULTI_PCI_MSI flag into msi_domain_info structure. But allocated interrupt numbers for Multi-MSI needs to be properly aligned otherwise devices send MSI interrupt with wrong number. Fix this issue by using function bitmap_find_free_region() instead of bitmap_find_next_zero_area() to allocate aligned interrupt numbers. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: a71b9412c90c ("irqchip/armada-370-xp: Allow allocation of multiple MSIs") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125130057.26705-2-pali@kernel.org
2021-11-25irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()Pali Rohár1-1/+1
IRQ domain alloc function should return zero on success. Non-zero value indicates failure. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: fcc392d501bd ("irqchip/armada-370-xp: Use the generic MSI infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125130057.26705-1-pali@kernel.org
2021-11-12irqchip/sifive-plic: Fixup EOI failed when maskedGuo Ren1-1/+7
When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in a driver, only the first interrupt is handled, and following interrupts are never delivered (initially reported in [1]). That's because the RISC-V PLIC cannot EOI masked interrupts, as explained in the description of Interrupt Completion in the PLIC spec [2]: <quote> The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that *is currently enabled* for the target, the completion is silently ignored. </quote> Re-enable the interrupt before completion if it has been masked during the handling, and remask it afterwards. [1] http://lists.infradead.org/pipermail/linux-riscv/2021-July/007441.html [2] https://github.com/riscv/riscv-plic-spec/blob/8bc15a35d07c9edf7b5d23fec9728302595ffc4d/riscv-plic.adoc Fixes: bb0fed1c60cc ("irqchip/sifive-plic: Switch to fasteoi flow") Reported-by: Vincent Pelletier <plr.vincent@gmail.com> Tested-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> [maz: amended commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211105094748.3894453-1-guoren@kernel.org
2021-11-12irqchip/csky-mpintc: Fixup mask/unmask implementationGuo Ren1-4/+4
The mask/unmask must be implemented, and enable/disable supplement them if the HW requires something different at startup time. When irq source is disabled by mask, mpintc could complete irq normally. So drop enable/disable if favour of mask/unmask. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211101134534.3804542-1-guoren@kernel.org
2021-10-28Merge branch irq/irq_cpu_offline into irq/irqchip-nextMarc Zyngier1-11/+26
* irq/irq_cpu_offline: : . : Make irq_cpu_{on,off}line() deprecated kernel API, and only : enable it for some obscure Cavium platform after having : moved all the other users away from it. : : Next step, drop the platform itself. : . genirq: Hide irq_cpu_{on,off}line() behind a deprecated option irqchip/mips-gic: Get rid of the reliance on irq_cpu_online() MIPS: loongson64: Drop call to irq_cpu_offline() Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-28Merge branch irq/remove-handle-domain-irq-20211026 into irq/irqchip-nextMarc Zyngier37-68/+92
* irq/remove-handle-domain-irq-20211026: : Large rework of the architecture entry code from Mark Rutland. : From the cover letter: : : <quote> : The handle_domain_{irq,nmi}() functions were oringally intended as a : convenience, but recent rework to entry code across the kernel tree has : demonstrated that they cause more pain than they're worth and prevent : architectures from being able to write robust entry code. : : This series reworks the irq code to remove them, handling the necessary : entry work consistently in entry code (be it architectural or generic). : </quote> MIPS: irq: Avoid an unused-variable error irq: remove handle_domain_{irq,nmi}() irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: riscv: perform irqentry in entry code irq: openrisc: perform irqentry in entry code irq: csky: perform irqentry in entry code irq: arm64: perform irqentry in entry code irq: arm: perform irqentry in entry code irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: add generic_handle_arch_irq() irq: unexport handle_irq_desc() irq: simplify handle_domain_{irq,nmi}() irq: mips: simplify do_domain_IRQ() irq: mips: stop (ab)using handle_domain_irq() irq: mips: simplify bcm6345_l1_irq_handle() irq: mips: avoid nested irq_enter() Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-26irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()Marc Zyngier1-11/+26
The MIPS GIC driver uses irq_cpu_online() to go and program the per-CPU interrupts. However, this method iterates over all IRQs in the system, despite only 3 per-CPU interrupts being of interest. Let's be terribly bold and do the iteration ourselves. To ensure mutual exclusion, hold the gic_lock spinlock that is otherwise taken while dealing with these interrupts. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20211021170414.3341522-3-maz@kernel.org
2021-10-26irq: remove handle_domain_{irq,nmi}()Mark Rutland35-63/+58
Now that entry code handles IRQ entry (including setting the IRQ regs) before calling irqchip code, irqchip code can safely call generic_handle_domain_irq(), and there's no functional reason for it to call handle_domain_irq(). Let's cement this split of responsibility and remove handle_domain_irq() entirely, updating irqchip drivers to call generic_handle_domain_irq(). For consistency, handle_domain_nmi() is similarly removed and replaced with a generic_handle_domain_nmi() function which also does not perform any entry logic. Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire when they were called in an inappropriate context. So that we can identify similar issues going forward, similar WARN_ON_ONCE() logic is added to the generic_handle_*() functions, and comments are updated for clarity and consistency. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-10-25irq: arm: perform irqentry in entry codeMark Rutland1-1/+16
In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have arch/arm perform all the irqentry accounting in its entry code. For configurations with CONFIG_GENERIC_IRQ_MULTI_HANDLER, we can use generic_handle_arch_irq(). Other than asm_do_IRQ(), all C calls to handle_IRQ() are from irqchip handlers which will be called from generic_handle_arch_irq(), so to avoid double accounting IRQ entry, the entry logic is moved from handle_IRQ() into asm_do_IRQ(). For ARMv7M the entry assembly is tightly coupled with the NVIC irqchip, and while the entry code should logically live under arch/arm/, moving the entry logic there makes things more convoluted. So for now, place the entry logic in the NVIC irqchip, but separated into a separate function to make the split of responsibility clear. For all other configurations without CONFIG_GENERIC_IRQ_MULTI_HANDLER, IRQ entry is already handled in arch code, and requires no changes. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-10-25irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQMark Rutland1-2/+20
In preparation for removing HANDLE_DOMAIN_IRQ, have arch/nds32 perform all the necessary IRQ entry accounting in its entry code. Currently arch/nds32 is tightly coupled with the ativic32 irqchip, and while the entry code should logically live under arch/nds32/, moving the entry logic there makes things more convoluted. So for now, place the entry logic in the ativic32 irqchip, but separated into a separate function to make the split of responsibility clear. In future this should probably use GENERIC_IRQ_MULTI_HANDLER to cleanly decouple this. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Chen <deanbo422@gmail.com>
2021-10-25irq: mips: simplify bcm6345_l1_irq_handle()Mark Rutland1-5/+1
As bcm6345_l1_irq_handle() only needs to know /whether/ an IRQ was resolved, and doesn't need to know the specific IRQ, it's simpler for it to call generic_handle_domain_irq() directly and check the return code, so let's do that. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-10-25irq: mips: avoid nested irq_enter()Mark Rutland1-1/+1
As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be invoked within the context of the root irqchip handler, which must have entered IRQ context already. When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest another call to irq_enter(), and the resulting nested increment to `rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle() to fail to identify wakeups from idle, resulting in failure to preempt, and RCU stalls. Chained irqchip handlers must invoke IRQ handlers by way of thee core irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq() and should not call do_IRQ(), which is intended only for root irqchip handlers. Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly. Fixes: c7c42ec2baa1de7a ("irqchips/bmips: Add bcm6345-l1 interrupt controller") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-10-25Merge branch irq/mchp-eic into irq/irqchip-nextMarc Zyngier3-0/+289
* irq/mchp-eic: : . : New irqchip driver for the Microchip EIC block : . irqchip/mchp-eic: Fix return value check in mchp_eic_init() irqchip/mchp-eic: Add support for the Microchip EIC dt-bindings: microchip,eic: Add bindings for the Microchip EIC Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-25Merge branch irq/modular-irqchips into irq/irqchip-nextMarc Zyngier5-60/+56
* irq/modular-irqchips: : . : Update a set of irqchip drivers to be build as modules. : : This includes an Amlogic and multiple Broadcom drivers, triggering : a cascade of other changes (MIPS arch code, symbols being exported, : config changes) : . irqchip: Fix kernel-doc parameter typo for IRQCHIP_DECLARE ARM: bcm: Removed forced select of interrupt controllers arm64: broadcom: Removed forced select of interrupt controllers irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER genirq: Export irq_gc_noop() irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER genirq: Export irq_gc_{unmask_enable,mask_disable}_reg irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER irqchip/irq-bcm7038-l1: Restrict affinity setting to MIPS irqchip/irq-bcm7038-l1: Gate use of CPU logical map to MIPS irqchip/irq-bcm7038-l1: Use irq_get_irq_data() irqchip/irq-bcm7038-l1: Remove .irq_cpu_offline() MIPS: BMIPS: Remove use of irq_cpu_offline arm64: meson: remove MESON_IRQ_GPIO selection irqchip/meson-gpio: Make it possible to build as a module irqchip: Provide stronger type checking for IRQCHIP_MATCH/IRQCHIP_DECLARE Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-25irqchip/mchp-eic: Fix return value check in mchp_eic_init()Yang Yingliang1-1/+1
In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211025050055.1129845-1-yangyingliang@huawei.com
2021-10-20irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVERFlorian Fainelli2-7/+18
Allow the user selection and building of this interrupt controller driver as a module since it is used on ARM/ARM64 based systems as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. To avoid using of_irq_count() which is not exported towards module, switch the driver to use the platform_device provided by the irqchip platform driver code and resolve the number of interrupts using platform_irq_count(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211020184859.2705451-11-f.fainelli@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 17:09:06 +0000