diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/busses/i2c-mxs.c | 26 |
1 files changed, 19 insertions, 7 deletions
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index e2e9a0dade96..43e2273ac610 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -123,9 +123,11 @@ struct mxs_i2c_dev { bool dma_read; }; -static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) +static int mxs_i2c_reset(struct mxs_i2c_dev *i2c) { - stmp_reset_block(i2c->regs); + int ret = stmp_reset_block(i2c->regs); + if (ret) + return ret; /* * Configure timing for the I2C block. The I2C TIMING2 register has to @@ -139,6 +141,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(0x00300030, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); + + return 0; } static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) @@ -475,7 +479,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); - int ret; + int ret, err; int flags; flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; @@ -495,8 +499,11 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, i2c->cmd_err = 0; if (0) { /* disable PIO mode until a proper fix is made */ ret = mxs_i2c_pio_setup_xfer(adap, msg, flags); - if (ret) - mxs_i2c_reset(i2c); + if (ret) { + err = mxs_i2c_reset(i2c); + if (err) + return err; + } } else { INIT_COMPLETION(i2c->cmd_complete); ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); @@ -527,7 +534,10 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); mxs_i2c_dma_finish(i2c); - mxs_i2c_reset(i2c); + ret = mxs_i2c_reset(i2c); + if (ret) + return ret; + return -ETIMEDOUT; } @@ -683,7 +693,9 @@ static int mxs_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); /* Do reset to enforce correct startup after pinmuxing */ - mxs_i2c_reset(i2c); + err = mxs_i2c_reset(i2c); + if (err) + return err; adap = &i2c->adapter; strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name)); |