diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/otg/twl4030-usb.c | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 3acbdb82bcf9..2be9f2fa41f9 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -276,16 +276,16 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, { u8 check; - if ((twl4030_i2c_write_u8(module, data, address) >= 0) && - (twl4030_i2c_read_u8(module, &check, address) >= 0) && + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", 1, module, address, check, data); /* Failed once: Try again */ - if ((twl4030_i2c_write_u8(module, data, address) >= 0) && - (twl4030_i2c_read_u8(module, &check, address) >= 0) && + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", @@ -303,7 +303,7 @@ static inline int twl4030_usb_write(struct twl4030_usb *twl, { int ret = 0; - ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address); + ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address); if (ret < 0) dev_dbg(twl->dev, "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); @@ -315,7 +315,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) u8 data; int ret = 0; - ret = twl4030_i2c_read_u8(module, &data, address); + ret = twl_i2c_read_u8(module, &data, address); if (ret >= 0) ret = data; else @@ -462,7 +462,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) * SLEEP. We work around this by clearing the bit after usv3v1 * is re-activated. This ensures that VUSB3V1 is really active. */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); pwr &= ~PHY_PWR_PHYPWD; @@ -505,44 +505,44 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) static int twl4030_usb_ldo_init(struct twl4030_usb *twl) { /* Enable writing to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); /* put VUSB3V1 LDO in active state */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); /* Initialize 3.1V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); if (IS_ERR(twl->usb3v1)) return -ENODEV; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); /* Initialize 1.5V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); if (IS_ERR(twl->usb1v5)) goto fail1; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); /* Initialize 1.8V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); if (IS_ERR(twl->usb1v8)) goto fail2; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); /* disable access to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); return 0; |