diff options
Diffstat (limited to 'drivers/soc')
| -rw-r--r-- | drivers/soc/xilinx/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/soc/xilinx/xlnx_vcu.c | 96 |
2 files changed, 48 insertions, 49 deletions
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig index 646512d7276f..0b1708dae361 100644 --- a/drivers/soc/xilinx/Kconfig +++ b/drivers/soc/xilinx/Kconfig @@ -4,6 +4,7 @@ menu "Xilinx SoC drivers" config XILINX_VCU tristate "Xilinx VCU logicoreIP Init" depends on HAS_IOMEM + select REGMAP_MMIO help Provides the driver to enable and disable the isolation between the processing system and programmable logic part by using the logicoreIP diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c index a3aa40996f13..14daad4efc58 100644 --- a/drivers/soc/xilinx/xlnx_vcu.c +++ b/drivers/soc/xilinx/xlnx_vcu.c @@ -10,39 +10,12 @@ #include <linux/device.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/xlnx-vcu.h> #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> - -/* Address map for different registers implemented in the VCU LogiCORE IP. */ -#define VCU_ECODER_ENABLE 0x00 -#define VCU_DECODER_ENABLE 0x04 -#define VCU_MEMORY_DEPTH 0x08 -#define VCU_ENC_COLOR_DEPTH 0x0c -#define VCU_ENC_VERTICAL_RANGE 0x10 -#define VCU_ENC_FRAME_SIZE_X 0x14 -#define VCU_ENC_FRAME_SIZE_Y 0x18 -#define VCU_ENC_COLOR_FORMAT 0x1c -#define VCU_ENC_FPS 0x20 -#define VCU_MCU_CLK 0x24 -#define VCU_CORE_CLK 0x28 -#define VCU_PLL_BYPASS 0x2c -#define VCU_ENC_CLK 0x30 -#define VCU_PLL_CLK 0x34 -#define VCU_ENC_VIDEO_STANDARD 0x38 -#define VCU_STATUS 0x3c -#define VCU_AXI_ENC_CLK 0x40 -#define VCU_AXI_DEC_CLK 0x44 -#define VCU_AXI_MCU_CLK 0x48 -#define VCU_DEC_VIDEO_STANDARD 0x4c -#define VCU_DEC_FRAME_SIZE_X 0x50 -#define VCU_DEC_FRAME_SIZE_Y 0x54 -#define VCU_DEC_FPS 0x58 -#define VCU_BUFFER_B_FRAME 0x5c -#define VCU_WPP_EN 0x60 -#define VCU_PLL_CLK_DEC 0x64 -#define VCU_GASKET_INIT 0x74 -#define VCU_GASKET_VALUE 0x03 +#include <linux/regmap.h> /* vcu slcr registers, bitmask and shift */ #define VCU_PLL_CTRL 0x24 @@ -106,11 +79,20 @@ struct xvcu_device { struct device *dev; struct clk *pll_ref; struct clk *aclk; - void __iomem *logicore_reg_ba; + struct regmap *logicore_reg_ba; void __iomem *vcu_slcr_ba; u32 coreclk; }; +static struct regmap_config vcu_settings_regmap_config = { + .name = "regmap", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0xfff, + .cache_type = REGCACHE_NONE, +}; + /** * struct xvcu_pll_cfg - Helper data * @fbdiv: The integer portion of the feedback divider to the PLL @@ -300,10 +282,12 @@ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) int ret, i; const struct xvcu_pll_cfg *found = NULL; - inte = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK); - deci = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC); - coreclk = xvcu_read(xvcu->logicore_reg_ba, VCU_CORE_CLK) * MHZ; - mcuclk = xvcu_read(xvcu->logicore_reg_ba, VCU_MCU_CLK) * MHZ; + regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK, &inte); + regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC, &deci); + regmap_read(xvcu->logicore_reg_ba, VCU_CORE_CLK, &coreclk); + coreclk *= MHZ; + regmap_read(xvcu->logicore_reg_ba, VCU_MCU_CLK, &mcuclk); + mcuclk *= MHZ; if (!mcuclk || !coreclk) { dev_err(xvcu->dev, "Invalid mcu and core clock data\n"); return -EINVAL; @@ -498,6 +482,7 @@ static int xvcu_probe(struct platform_device *pdev) { struct resource *res; struct xvcu_device *xvcu; + void __iomem *regs; int ret; xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL); @@ -518,17 +503,32 @@ static int xvcu_probe(struct platform_device *pdev) return -ENOMEM; } - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "logicore"); - if (!res) { - dev_err(&pdev->dev, "get logicore memory resource failed.\n"); - return -ENODEV; - } + xvcu->logicore_reg_ba = + syscon_regmap_lookup_by_compatible("xlnx,vcu-settings"); + if (IS_ERR(xvcu->logicore_reg_ba)) { + dev_info(&pdev->dev, + "could not find xlnx,vcu-settings: trying direct register access\n"); + + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "logicore"); + if (!res) { + dev_err(&pdev->dev, "get logicore memory resource failed.\n"); + return -ENODEV; + } - xvcu->logicore_reg_ba = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); - if (!xvcu->logicore_reg_ba) { - dev_err(&pdev->dev, "logicore register mapping failed.\n"); - return -ENOMEM; + regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!regs) { + dev_err(&pdev->dev, "logicore register mapping failed.\n"); + return -ENOMEM; + } + + xvcu->logicore_reg_ba = + devm_regmap_init_mmio(&pdev->dev, regs, + &vcu_settings_regmap_config); + if (IS_ERR(xvcu->logicore_reg_ba)) { + dev_err(&pdev->dev, "failed to init regmap\n"); + return PTR_ERR(xvcu->logicore_reg_ba); + } } xvcu->aclk = devm_clk_get(&pdev->dev, "aclk"); @@ -560,7 +560,7 @@ static int xvcu_probe(struct platform_device *pdev) * Bit 0 : Gasket isolation * Bit 1 : put VCU out of reset */ - xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); + regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); /* Do the PLL Settings based on the ref clk,core and mcu clk freq */ ret = xvcu_set_pll(xvcu); @@ -571,8 +571,6 @@ static int xvcu_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, xvcu); - dev_info(&pdev->dev, "%s: Probed successfully\n", __func__); - return 0; error_pll_ref: @@ -599,7 +597,7 @@ static int xvcu_remove(struct platform_device *pdev) return -ENODEV; /* Add the the Gasket isolation and put the VCU in reset. */ - xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); + regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); clk_disable_unprepare(xvcu->pll_ref); clk_disable_unprepare(xvcu->aclk); |