diff options
Diffstat (limited to 'arch/arm')
90 files changed, 650 insertions, 323 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87693e631129..f0501635b88d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -907,6 +907,7 @@ config ARCH_U300 config ARCH_U8500 bool "ST-Ericsson U8500 Series" + depends on MMU select CPU_V7 select ARM_AMBA select GENERIC_CLOCKEVENTS @@ -1583,7 +1584,7 @@ config LOCAL_TIMERS config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 350 if ARCH_U8500 + default 355 if ARCH_U8500 default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index a22e93079063..d88fb87b414d 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -68,6 +68,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig new file mode 100644 index 000000000000..fb2088171ca9 --- /dev/null +++ b/arch/arm/configs/lpc32xx_defconfig @@ -0,0 +1,145 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_LPC32XX=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0" +CONFIG_CPU_IDLE=y +CONFIG_FPE_NWFPE=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_MUSEUM_IDS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT25=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_LPC32XX=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_PNX=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_PNX4008_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_LIBUSUAL=y +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_LPC32XX=y +CONFIG_EXT2_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=y diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 5bba7070f271..031048fec9f5 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -95,7 +95,7 @@ static int davinci_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return ret; - dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); + dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); ret = cpufreq_frequency_table_target(policy, pdata->freq_table, freqs.new, relation, &idx); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 992c4c410185..b44dc844e15e 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1026,7 +1026,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate) } #endif -int da850_register_pm(struct platform_device *pdev) +int __init da850_register_pm(struct platform_device *pdev) { int ret; struct davinci_pm_config *pdata = pdev->dev.platform_data; diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index da90103a313d..fd33919c95d4 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -1508,12 +1508,8 @@ static int __init edma_probe(struct platform_device *pdev) goto fail; } - /* Everything lives on transfer controller 1 until otherwise - * specified. This way, long transfers on the low priority queue - * started by the codec engine will not cause audio defects. - */ for (i = 0; i < edma_cc[j]->num_channels; i++) - map_dmach_queue(j, i, EVENTQ_1); + map_dmach_queue(j, i, info[j]->default_queue); queue_tc_mapping = info[j]->queue_tc_mapping; queue_priority_mapping = info[j]->queue_priority_mapping; diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index 20c77f29bf0f..7e84c906ceff 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -250,6 +250,11 @@ struct edma_soc_info { unsigned n_slot; unsigned n_tc; unsigned n_cc; + /* + * Default queue is expected to be a low-priority queue. + * This way, long transfers on the default queue started + * by the codec engine will not cause audio defects. + */ enum dma_event_q default_queue; /* Resource reservation for other cores */ diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 16f126da9f8f..2f3debe2a113 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -233,7 +233,7 @@ static struct regulator_init_data sdhc1_data = { static struct regulator_consumer_supply cam_consumers[] = { { - .dev = NULL, + .dev_name = NULL, .supply = "imx_cam_vcc", }, }; diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9c9b7f9f43dc..07699196b461 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -76,7 +76,7 @@ static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, return __arm_ioremap(phys_addr, size, mtype); } -void imx3_init_l2x0(void) +void __init imx3_init_l2x0(void) { void __iomem *l2x0_base; void __iomem *clkctl_base; diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 1e027514096d..0e01bf44479c 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -82,6 +82,7 @@ * will also impact the individual peripheral rates. */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/errno.h> @@ -97,9 +98,10 @@ #include "clock.h" #include "common.h" +static DEFINE_SPINLOCK(global_clkregs_lock); + static struct clk clk_armpll; static struct clk clk_usbpll; -static DEFINE_MUTEX(clkm_lock); /* * Post divider values for PLLs based on selected register value @@ -127,7 +129,7 @@ static struct clk osc_32KHz = { static int local_pll397_enable(struct clk *clk, int enable) { u32 reg; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); @@ -142,7 +144,7 @@ static int local_pll397_enable(struct clk *clk, int enable) /* Wait for PLL397 lock */ while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && - (timeout > jiffies)) + time_before(jiffies, timeout)) cpu_relax(); if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & @@ -156,7 +158,7 @@ static int local_pll397_enable(struct clk *clk, int enable) static int local_oscmain_enable(struct clk *clk, int enable) { u32 reg; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); @@ -171,7 +173,7 @@ static int local_oscmain_enable(struct clk *clk, int enable) /* Wait for main oscillator to start */ while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && - (timeout > jiffies)) + time_before(jiffies, timeout)) cpu_relax(); if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & @@ -383,7 +385,7 @@ static int local_usbpll_enable(struct clk *clk, int enable) { u32 reg; int ret = -ENODEV; - unsigned long timeout = 1 + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(10); reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); @@ -396,7 +398,7 @@ static int local_usbpll_enable(struct clk *clk, int enable) __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); /* Wait for PLL lock */ - while ((timeout > jiffies) & (ret == -ENODEV)) { + while (time_before(jiffies, timeout) && (ret == -ENODEV)) { reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) ret = 0; @@ -891,20 +893,8 @@ static struct clk clk_lcd = { .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, }; -static inline void clk_lock(void) -{ - mutex_lock(&clkm_lock); -} - -static inline void clk_unlock(void) -{ - mutex_unlock(&clkm_lock); -} - static void local_clk_disable(struct clk *clk) { - WARN_ON(clk->usecount == 0); - /* Don't attempt to disable clock if it has no users */ if (clk->usecount > 0) { clk->usecount--; @@ -947,10 +937,11 @@ static int local_clk_enable(struct clk *clk) int clk_enable(struct clk *clk) { int ret; + unsigned long flags; - clk_lock(); + spin_lock_irqsave(&global_clkregs_lock, flags); ret = local_clk_enable(clk); - clk_unlock(); + spin_unlock_irqrestore(&global_clkregs_lock, flags); return ret; } @@ -961,9 +952,11 @@ EXPORT_SYMBOL(clk_enable); */ void clk_disable(struct clk *clk) { - clk_lock(); + unsigned long flags; + + spin_lock_irqsave(&global_clkregs_lock, flags); local_clk_disable(clk); - clk_unlock(); + spin_unlock_irqrestore(&global_clkregs_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -972,13 +965,7 @@ EXPORT_SYMBOL(clk_disable); */ unsigned long clk_get_rate(struct clk *clk) { - unsigned long rate; - - clk_lock(); - rate = clk->get_rate(clk); - clk_unlock(); - - return rate; + return clk->get_rate(clk); } EXPORT_SYMBOL(clk_get_rate); @@ -994,11 +981,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate) * the actual rate set as part of the peripheral dividers * instead of high level clock control */ - if (clk->set_rate) { - clk_lock(); + if (clk->set_rate) ret = clk->set_rate(clk, rate); - clk_unlock(); - } return ret; } @@ -1009,15 +993,11 @@ EXPORT_SYMBOL(clk_set_rate); */ long clk_round_rate(struct clk *clk, unsigned long rate) { - clk_lock(); - if (clk->round_rate) rate = clk->round_rate(clk, rate); else rate = clk->get_rate(clk); - clk_unlock(); - return rate; } EXPORT_SYMBOL(clk_round_rate); @@ -1075,10 +1055,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1) _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan) _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) - _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) - _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) + _REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0) + _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1) _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) - _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc) + _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc) _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd) diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 4b4e700343c1..75640bfb097f 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -65,7 +65,6 @@ extern u32 clk_get_pclk_div(void); */ extern void lpc32xx_get_uid(u32 devid[4]); -extern void lpc32xx_watchdog_reset(void); extern u32 lpc32xx_return_iram_size(void); /* diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index 14ea8d1aadb5..c584f5bb164f 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -591,42 +591,42 @@ /* * Timer/counter register offsets */ -#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00) -#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04) -#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08) -#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C) -#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10) -#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14) -#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18) -#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C) -#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20) -#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24) -#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28) -#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C) -#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30) -#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34) -#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38) -#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C) -#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70) +#define LPC32XX_TIMER_IR(x) io_p2v((x) + 0x00) +#define LPC32XX_TIMER_TCR(x) io_p2v((x) + 0x04) +#define LPC32XX_TIMER_TC(x) io_p2v((x) + 0x08) +#define LPC32XX_TIMER_PR(x) io_p2v((x) + 0x0C) +#define LPC32XX_TIMER_PC(x) io_p2v((x) + 0x10) +#define LPC32XX_TIMER_MCR(x) io_p2v((x) + 0x14) +#define LPC32XX_TIMER_MR0(x) io_p2v((x) + 0x18) +#define LPC32XX_TIMER_MR1(x) io_p2v((x) + 0x1C) +#define LPC32XX_TIMER_MR2(x) io_p2v((x) + 0x20) +#define LPC32XX_TIMER_MR3(x) io_p2v((x) + 0x24) +#define LPC32XX_TIMER_CCR(x) io_p2v((x) + 0x28) +#define LPC32XX_TIMER_CR0(x) io_p2v((x) + 0x2C) +#define LPC32XX_TIMER_CR1(x) io_p2v((x) + 0x30) +#define LPC32XX_TIMER_CR2(x) io_p2v((x) + 0x34) +#define LPC32XX_TIMER_CR3(x) io_p2v((x) + 0x38) +#define LPC32XX_TIMER_EMR(x) io_p2v((x) + 0x3C) +#define LPC32XX_TIMER_CTCR(x) io_p2v((x) + 0x70) /* * ir register definitions */ -#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3)) -#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3))) +#define LPC32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3)) +#define LPC32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3))) /* * tcr register definitions */ -#define LCP32XX_TIMER_CNTR_TCR_EN 0x1 -#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2 +#define LPC32XX_TIMER_CNTR_TCR_EN 0x1 +#define LPC32XX_TIMER_CNTR_TCR_RESET 0x2 /* * mcr register definitions */ -#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3)) -#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1)) -#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2)) +#define LPC32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3)) +#define LPC32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1)) +#define LPC32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2)) /* * Standard UART register offsets @@ -690,5 +690,8 @@ #define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130) #define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134) #define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138) +#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) +#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) +#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) #endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 5d51c102c255..8571d6250dc1 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -247,6 +247,8 @@ static struct platform_device lpc32xx_gpio_led_device = { }; static struct platform_device *phy3250_devs[] __initdata = { + &lpc32xx_rtc_device, + &lpc32xx_tsc_device, &lpc32xx_i2c0_device, &lpc32xx_i2c1_device, &lpc32xx_i2c2_device, diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index b9c80597b7bf..207e81275ff0 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -13,7 +13,7 @@ /* * LPC32XX CPU and system power management * - * The LCP32XX has three CPU modes for controlling system power: run, + * The LPC32XX has three CPU modes for controlling system power: run, * direct-run, and halt modes. When switching between halt and run modes, * the CPU transistions through direct-run mode. For Linux, direct-run * mode is not used in normal operation. Halt mode is used when the diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c index b42c909bbeeb..c40667c33161 100644 --- a/arch/arm/mach-lpc32xx/timer.c +++ b/arch/arm/mach-lpc32xx/timer.c @@ -34,11 +34,11 @@ static int lpc32xx_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) { - __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, - LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, - LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, + LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, + LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); return 0; } @@ -58,7 +58,7 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode, * disable the timer to wait for the first call to * set_next_event(). */ - __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); break; case CLOCK_EVT_MODE_UNUSED: @@ -81,8 +81,8 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &lpc32xx_clkevt; /* Clear match */ - __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), - LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), + LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); evt->event_handler(evt); @@ -128,14 +128,14 @@ static void __init lpc32xx_timer_init(void) clkrate = clkrate / clk_get_pclk_div(); /* Initial timer setup */ - __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), - LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) | - LCP32XX_TIMER_CNTR_MCR_STOP(0) | - LCP32XX_TIMER_CNTR_MCR_RESET(0), - LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); + __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), + LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) | + LPC32XX_TIMER_CNTR_MCR_STOP(0) | + LPC32XX_TIMER_CNTR_MCR_RESET(0), + LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); /* Setup tick interrupt */ setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); @@ -151,14 +151,14 @@ static void __init lpc32xx_timer_init(void) clockevents_register_device(&lpc32xx_clkevt); /* Use timer1 as clock source. */ - __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, - LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); - __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, - LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - - clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE), + __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, + LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); + __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, + LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + + clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); } diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 8e55b6fb3478..55a8f582d04c 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -118,7 +118,7 @@ void __init omap16xx_map_io(void) /* * Common low-level hardware init for omap1. */ -void omap1_init_early(void) +void __init omap1_init_early(void) { omap_check_revision(); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e20c8ab80b0e..21a4095a1000 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -32,7 +32,7 @@ config ARCH_OMAP3 depends on ARCH_OMAP2PLUS default y select CPU_V7 - select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM @@ -52,7 +52,7 @@ config ARCH_OMAP4 select ARM_ERRATA_720789 select ARCH_HAS_OPP select PM_OPP if PM - select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 06326a6e460d..28f150065938 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -184,9 +184,6 @@ obj-$(CONFIG_OMAP_IOMMU) += iommu2.o iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) -i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o -obj-y += $(i2c-omap-m) $(i2c-omap-y) - ifneq ($(CONFIG_TIDSPBRIDGE),) obj-y += dsp.o endif @@ -270,6 +267,8 @@ obj-y += $(smc91x-m) $(smc91x-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) -obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o +ifneq ($(CONFIG_HWSPINLOCK_OMAP),) +obj-y += hwspinlock.o +endif obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 7370983f809f..c8bda62900d8 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -279,7 +279,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 383717ba63b9..da75f239873e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -232,11 +232,13 @@ static struct omap2_hsmmc_info mmc[] = { */ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 4, + .deferred = true, }, { .mmc = 2, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 7, + .deferred = true, }, {} /* Terminator */ }; @@ -249,7 +251,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev, */ mmc[0].gpio_cd = gpio + 0; mmc[1].gpio_cd = gpio + 1; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); @@ -606,6 +608,7 @@ static void __init omap_3430sdp_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); + omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 44cf1893829a..890c446e7b35 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -521,9 +521,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) { struct omap2_hsmmc_info *c; - omap2_hsmmc_init(controllers); + omap_hsmmc_init(controllers); for (c = controllers; c->mmc; c++) - omap4_twl6030_hsmmc_set_late_init(c->dev); + omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); return 0; } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4b1cfe32e6ba..71138a1271d8 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -504,7 +504,7 @@ static void __init am3517_evm_init(void) am3517_evm_musb_init(); /* MMC init function */ - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index d73316ed4207..49e64057cb67 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -413,7 +413,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, - + .deferred = true, }, { .mmc = 2, @@ -471,7 +471,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); return 0; } @@ -639,6 +639,7 @@ static void __init cm_t3x_common_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); + omap_hsmmc_init(mmc); cm_t35_init_i2c(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e873063f4fda..11cd2a806093 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, + .deferred = true, }, {} /* Terminator */ }; @@ -228,7 +229,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -636,6 +637,7 @@ static void __init devkit8000_init(void) omap_dm9000_init(); + omap_hsmmc_init(mmc); devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 30a6f527510c..0349fd2b68d8 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -189,7 +189,7 @@ unmap: * * @return - void. */ -void board_flash_init(struct flash_partitions partition_info[], +void __init board_flash_init(struct flash_partitions partition_info[], char chip_sel_board[][GPMC_CS_NUM], int nand_type) { u8 cs = 0; diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index a59ace0ed560..e558800adfdf 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -295,6 +295,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .deferred = true, }, #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) { @@ -402,7 +403,7 @@ static int igep_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) @@ -639,6 +640,9 @@ static void __init igep_init(void) /* Get IGEP2 hardware revision */ igep2_get_revision(); + + omap_hsmmc_init(mmc); + /* Register I2C busses and drivers */ igep_i2c_init(); platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2d2a61f7dcbf..d50a562adfa0 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -27,7 +27,6 @@ #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -424,7 +423,7 @@ static void __init omap_ldp_init(void) board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); ldp_display_init(); } diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 672262717601..50e40bc3f8f7 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -36,10 +36,6 @@ #include "mux.h" -static int slot1_cover_open; -static int slot2_cover_open; -static struct device *mmc_device; - #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 #define TUSB6010_GPIO_INT 58 @@ -211,6 +207,10 @@ static struct omap_onenand_platform_data board_onenand_data[] = { #define N810_EMMC_VSD_GPIO 23 #define N810_EMMC_VIO_GPIO 9 +static int slot1_cover_open; +static int slot2_cover_open; +static struct device *mmc_device; + static int n8x0_mmc_switch_slot(struct device *dev, int slot) { #ifdef CONFIG_MMC_DEBUG diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7ffcd2839e7b..7be8d659d91d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -253,6 +253,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, + .deferred = true, }, {} /* Terminator */ }; @@ -272,12 +273,10 @@ static int beagle_twl_gpio_setup(struct device *dev, { int r; - if (beagle_config.mmc1_gpio_wp != -EINVAL) - omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active @@ -521,6 +520,11 @@ static void __init omap3_beagle_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); + + if (beagle_config.mmc1_gpio_wp != -EINVAL) + omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + omap_hsmmc_init(mmc); + omap3_beagle_i2c_init(); gpio_buttons[0].gpio = beagle_config.usr_button_gpio; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c877236a8442..a659e198892b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -317,6 +317,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 63, + .deferred = true, }, #ifdef CONFIG_WL12XX_PLATFORM_DATA { @@ -361,9 +362,8 @@ static int omap3evm_twl_gpio_setup(struct device *dev, int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * Most GPIOs are for USB OTG. Some are mostly sent to @@ -644,6 +644,9 @@ static void __init omap3_evm_init(void) omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); + omap_hsmmc_init(mmc); + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4198dd017d8f..2304ba340e99 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -128,7 +128,7 @@ static void __init board_mmc_init(void) return; } - omap2_hsmmc_init(board_mmc_info); + omap_hsmmc_init(board_mmc_info); } static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1644b73017fc..7184b8b9e38f 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -273,6 +273,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = 126, .ext_clock = 0, + .deferred = true, }, { .mmc = 2, @@ -281,6 +282,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .gpio_wp = 127, .ext_clock = 1, .transceiver = true, + .deferred = true, }, { .mmc = 3, @@ -300,7 +302,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */ omap3pandora_mmc[0].gpio_cd = gpio + 0; omap3pandora_mmc[1].gpio_cd = gpio + 1; - omap2_hsmmc_init(omap3pandora_mmc); + omap_hsmmc_late_init(omap3pandora_mmc); /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; @@ -343,7 +345,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"), + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -561,13 +563,13 @@ static struct platform_device *omap3pandora_devices[] __initdata = { static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, - .reset_gpio_port[0] = 16, - .reset_gpio_port[1] = -EINVAL, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 16, .reset_gpio_port[2] = -EINVAL }; @@ -580,6 +582,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_hsmmc_init(omap3pandora_mmc); omap3pandora_i2c_init(); pandora_wl1251_init(); platform_add_devices(omap3pandora_devices, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index cb089a46f62f..641004380795 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -209,10 +209,11 @@ static struct regulator_init_data omap3stalker_vsim = { static struct omap2_hsmmc_info mmc[] = { { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 23, + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = 23, + .deferred = true, }, {} /* Terminator */ }; @@ -282,9 +283,8 @@ omap3stalker_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* * Most GPIOs are for USB OTG. Some are mostly sent to @@ -425,6 +425,9 @@ static void __init omap3_stalker_init(void) omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + omap_hsmmc_init(mmc); + omap3_stalker_i2c_init(); platform_add_devices(omap3_stalker_devices, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index a0b851aafcca..8842e04aef01 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, + .deferred = true, }, {} /* Terminator */ }; @@ -117,15 +118,9 @@ static struct gpio_led gpio_leds[]; static int touchbook_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -351,6 +346,14 @@ static void __init omap3_touchbook_init(void) pm_power_off = omap3_touchbook_poweroff; + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } + omap_hsmmc_init(mmc); + omap3_touchbook_i2c_init(); platform_add_devices(omap3_touchbook_devices, ARRAY_SIZE(omap3_touchbook_devices)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e4415917693f..866411d4fe65 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -271,9 +271,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) { struct omap2_hsmmc_info *c; - omap2_hsmmc_init(controllers); + omap_hsmmc_init(controllers); for (c = controllers; c->mmc; c++) - omap4_twl6030_hsmmc_set_late_init(c->dev); + omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); return 0; } @@ -504,7 +504,7 @@ static struct omap_dss_board_info omap4_panda_dss_data = { .default_device = &omap4_panda_dvi_device, }; -void omap4_panda_display_init(void) +void __init omap4_panda_display_init(void) { int r; diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52c0cef77165..668533e2a379 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -407,8 +407,6 @@ static inline void __init overo_init_keys(void) { return; } static int overo_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - omap2_hsmmc_init(mmc); - #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -505,6 +503,7 @@ static void __init overo_init(void) int ret; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_hsmmc_init(mmc); overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 8678b386c6a2..2d24c98f3d45 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -120,7 +120,7 @@ static void __init rm680_peripherals_init(void) ARRAY_SIZE(rm680_peripherals_devices)); rm680_i2c_init(); gpmc_onenand_init(board_onenand_data); - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index acb4e77b39ef..0e9d89a2048f 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1145,7 +1145,7 @@ void __init rx51_peripherals_init(void) partition = omap_mux_get("core"); if (partition) - omap2_hsmmc_init(mmc); + omap_hsmmc_init(mmc); rx51_charger_init(); } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index d4683ba5f721..2a13b9f6c61c 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -55,6 +55,7 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) { +#ifdef CONFIG_TWL4030_CORE unsigned char c; u8 mux_pwm, enb_pwm; @@ -90,6 +91,9 @@ static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) c = ((50 * (100 - level)) / 100) + 1; twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); +#else + pr_warn("Backlight not enabled\n"); +#endif return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index c126461836ac..3d39cdb2e250 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -205,6 +205,7 @@ static struct omap2_hsmmc_info mmc[] = { .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .power_saving = true, + .deferred = true, }, { .name = "internal", @@ -233,7 +234,7 @@ static int zoom_twl_gpio_setup(struct device *dev, /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"); @@ -301,6 +302,7 @@ void __init zoom_peripherals_init(void) if (ret) pr_err("error setting wl12xx data: %d\n", ret); + omap_hsmmc_init(mmc); omap_i2c_init(); platform_device_register(&omap_vwlan_device); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index e25364de028a..04d551b1f7f7 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -43,6 +43,7 @@ #include <linux/errno.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/bug.h> #include <plat/clock.h> diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index bcb0c5817167..799a617ade30 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -76,13 +76,15 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, gpio_set_debounce(gpio_pendown, gpio_debounce); } - ads7846_config.gpio_pendown = gpio_pendown; - spi_bi->bus_num = bus_num; spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); - if (board_pdata) + if (board_pdata) { + board_pdata->gpio_pendown = gpio_pendown; spi_bi->platform_data = board_pdata; + } else { + ads7846_config.gpio_pendown = gpio_pendown; + } spi_register_board_info(&ads7846_spi_board_info, 1); } diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 0ba68d3764bc..96c4bcc0a75c 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -339,6 +339,11 @@ #define AM35XX_VPFE_PCLK_SW_RST BIT(4) /* + * CONTROL AM33XX STATUS register + */ +#define AM33XX_CONTROL_STATUS 0x040 + +/* * CONTROL OMAP STATUS register to identify OMAP3 features */ #define OMAP3_CONTROL_OMAP_STATUS 0x044c diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index f713818be06f..881dab64ef6a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -276,7 +276,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data } #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) -static inline void omap_init_mbox(void) +static inline void __init omap_init_mbox(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -316,7 +316,7 @@ static inline void omap_init_audio(void) {} #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) -static void omap_init_mcpdm(void) +static void __init omap_init_mcpdm(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -337,7 +337,7 @@ static inline void omap_init_mcpdm(void) {} #if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) -static void omap_init_dmic(void) +static void __init omap_init_dmic(void) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -359,7 +359,7 @@ static inline void omap_init_dmic(void) {} #include <plat/mcspi.h> -static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) +static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused) { struct platform_device *pdev; char *name = "omap2_mcspi"; @@ -633,9 +633,7 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) /*-------------------------------------------------------------------------*/ #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) -#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) #define OMAP_HDQ_BASE 0x480B2000 -#endif static struct resource omap_hdq_resources[] = { { .start = OMAP_HDQ_BASE, @@ -658,7 +656,10 @@ static struct platform_device omap_hdq_dev = { }; static inline void omap_hdq_init(void) { - (void) platform_device_register(&omap_hdq_dev); + if (cpu_is_omap2420()) + return; + + platform_device_register(&omap_hdq_dev); } #else static inline void omap_hdq_init(void) {} diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 3677b1f58b85..62e133ca4314 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -124,7 +124,7 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) } } -static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) +static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; u32 pipd_mask, pipd_shift; @@ -157,7 +157,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } -int omap_hdmi_init(enum omap_hdmi_flags flags) +int __init omap_hdmi_init(enum omap_hdmi_flags flags) { if (cpu_is_omap44xx()) omap4_hdmi_mux_pads(flags); @@ -165,7 +165,7 @@ int omap_hdmi_init(enum omap_hdmi_flags flags) return 0; } -static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) +static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) return omap4_dsi_mux_pads(dsi_id, lane_mask); @@ -173,7 +173,7 @@ static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) return 0; } -static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) +static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) omap4_dsi_mux_pads(dsi_id, 0); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index a59a45a0096e..b19d8496c16e 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -227,7 +227,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) dma_stride = OMAP2_DMA_STRIDE; dma_common_ch_start = CSDP; - if (cpu_is_omap3630() || cpu_is_omap4430()) + if (cpu_is_omap3630() || cpu_is_omap44xx()) dma_common_ch_end = CCDN; else dma_common_ch_end = CCFN; diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 8cbfbc2918ce..64c0caed9516 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -24,7 +24,7 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) +static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) { struct platform_device *pdev; struct omap_gpio_platform_data *pdata; diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index bbb870c04a5e..5e5880d6d099 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -101,10 +101,13 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; - ret = platform_device_register(&gpmc_smsc911x_regulator); - if (ret < 0) { - pr_err("Unable to register smsc911x regulators: %d\n", ret); - return; + if (!gpmc_cfg->id) { + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", + ret); + return; + } } if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index dfffbbf4c009..00d510858e28 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -888,6 +888,7 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) gpmc_write_reg(GPMC_ECC_CONFIG, val); return 0; } +EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); /** * gpmc_calculate_ecc - generate non-inverted ecc bytes @@ -918,3 +919,4 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) gpmc_ecc_used = -EINVAL; return 0; } +EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 19dd1657245c..8121720e942f 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -293,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -429,66 +429,131 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } static int omap_hsmmc_done; + +void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) +{ + struct platform_device *pdev; + struct omap_mmc_platform_data *mmc_pdata; + int res; + + if (omap_hsmmc_done != 1) + return; + + omap_hsmmc_done++; + + for (; c->mmc; c++) { + if (!c->deferred) + continue; + + pdev = c->pdev; + if (!pdev) + continue; + + mmc_pdata = pdev->dev.platform_data; + if (!mmc_pdata) + continue; + + mmc_pdata->slots[0].switch_pin = c->gpio_cd; + mmc_pdata->slots[0].gpio_wp = c->gpio_wp; + + res = omap_device_register(pdev); + if (res) + pr_err("Could not late init MMC %s\n", + c->name); + } +} + #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, + int ctrl_nr) { struct omap_hwmod *oh; + struct omap_hwmod *ohs[1]; + struct omap_device *od; struct platform_device *pdev; char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; struct omap_mmc_platform_data *mmc_data; struct omap_mmc_dev_attr *mmc_dev_attr; char *name; - int l; + int res; mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); if (!mmc_data) { pr_err("Cannot allocate memory for mmc device!\n"); - goto done; + return; } - if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) { - pr_err("%s fails!\n", __func__); - goto done; - } + res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data); + if (res < 0) + goto free_mmc; + omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); name = "omap_hsmmc"; - - l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, + res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, "mmc%d", ctrl_nr); - WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN, + WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN, "String buffer overflow in MMC%d device setup\n", ctrl_nr); + oh = omap_hwmod_lookup(oh_name); if (!oh) { pr_err("Could not look up %s\n", oh_name); - kfree(mmc_data->slots[0].name); - goto done; + goto free_name; } - + ohs[0] = oh; if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; } - pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, - sizeof(struct omap_mmc_platform_data), NULL, 0, false); - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); - kfree(mmc_data->slots[0].name); - goto done; + pdev = platform_device_alloc(name, ctrl_nr - 1); + if (!pdev) { + pr_err("Could not allocate pdev for %s\n", name); + goto free_name; } - /* - * return device handle to board setup code - * required to populate for regulator framework structure - */ - hsmmcinfo->dev = &pdev->dev; + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + + od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + if (!od) { + pr_err("Could not allocate od for %s\n", name); + goto put_pdev; + } + + res = platform_device_add_data(pdev, mmc_data, + sizeof(struct omap_mmc_platform_data)); + if (res) { + pr_err("Could not add pdata for %s\n", name); + goto put_pdev; + } + + hsmmcinfo->pdev = pdev; + + if (hsmmcinfo->deferred) + goto free_mmc; + + res = omap_device_register(pdev); + if (res) { + pr_err("Could not register od for %s\n", name); + goto free_od; + } + + goto free_mmc; + +free_od: + omap_device_delete(od); + +put_pdev: + platform_device_put(pdev); + +free_name: + kfree(mmc_data->slots[0].name); -done: +free_mmc: kfree(mmc_data); } -void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; @@ -521,7 +586,7 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) } for (; controllers->mmc; controllers++) - omap_init_hsmmc(controllers, controllers->mmc); + omap_hsmmc_init_one(controllers, controllers->mmc); } diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index c4409730c4bb..07831cc3c171 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -21,10 +21,11 @@ struct omap2_hsmmc_info { bool no_off; /* power_saving and power is not to go off */ bool no_off_init; /* no power off when not in MMC sleep state */ bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ + bool deferred; /* mmc needs a deferred probe */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ - struct device *dev; /* returned: pointer to mmc adapter */ + struct platform_device *pdev; /* mmc controller instance */ int ocr_mask; /* temporary HACK */ /* Remux (pad configuration) when powering on/off */ void (*remux)(struct device *dev, int slot, int power_on); @@ -34,11 +35,16 @@ struct omap2_hsmmc_info { #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -void omap2_hsmmc_init(struct omap2_hsmmc_info *); +void omap_hsmmc_init(struct omap2_hsmmc_info *); +void omap_hsmmc_late_init(struct omap2_hsmmc_info *); #else -static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info) +static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info) +{ +} + +static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info) { } diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 719ee423abe2..613e2c1eeb2f 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -44,6 +44,8 @@ int omap_type(void) if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + } else if (cpu_is_am33xx()) { + val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); } else if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e501b4972a64..2d19efbbc52d 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -42,14 +42,13 @@ #include "clockdomain.h" #include <plat/omap_hwmod.h> #include <plat/multi.h> -#include "common.h" /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) static struct map_desc omap24xx_io_desc[] __initdata = { { .virtual = L3_24XX_VIRT, diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index ecc039e794db..577cb77db26c 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -158,7 +158,7 @@ static int omap3_enable_st_clock(unsigned int id, bool enable) return 0; } -static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) +static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) { int id, count = 1; char *name = "omap-mcbsp"; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 611a0e3d54ca..f26b2faa1694 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +145,7 @@ static int _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int omap_mux_init_gpio(int gpio, int val) +int __init omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +159,9 @@ int omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int +static int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) @@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int omap_mux_init_signal(const char *muxname, int val) +int __init omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 2132308ad1e4..69fe060a0b75 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -246,7 +246,7 @@ static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) { } -static struct omap_board_mux *board_mux __initdata __maybe_unused; +static struct omap_board_mux *board_mux __maybe_unused; #endif diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index adbe4d8c7caf..56c345b8b931 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -33,7 +33,7 @@ int platform_cpu_kill(unsigned int cpu) * platform-specific code to shutdown a CPU * Called with IRQs disabled */ -void platform_cpu_die(unsigned int cpu) +void __ref platform_cpu_die(unsigned int cpu) { unsigned int this_cpu; diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 1d5d01056558..fe9ab7c58fae 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -300,7 +300,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * @cpu : CPU ID * @power_state: CPU low power state. */ -int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index d3d8971d7f30..42cd7fb52414 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -43,7 +43,6 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; -static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); static DEFINE_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[NR_IRQS]; @@ -67,14 +66,6 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx) __raw_writel(val, sar_base + offset + (idx * 4)); } -static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - wakeupgen_writel(reg, i, cpu); -} - static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) { unsigned int spi_irq; @@ -130,22 +121,6 @@ static void _wakeupgen_set(unsigned int irq, unsigned int cpu) wakeupgen_writel(val, i, cpu); } -static void _wakeupgen_save_masks(unsigned int cpu) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); -} - -static void _wakeupgen_restore_masks(unsigned int cpu) -{ - u8 i; - - for (i = 0; i < NR_REG_BANKS; i++) - wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); -} - /* * Architecture specific Mask extension */ @@ -170,6 +145,33 @@ static void wakeupgen_unmask(struct irq_data *d) spin_unlock_irqrestore(&wakeupgen_lock, flags); } +#ifdef CONFIG_HOTPLUG_CPU +static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); + +static void _wakeupgen_save_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); +} + +static void _wakeupgen_restore_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); +} + +static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(reg, i, cpu); +} + /* * Mask or unmask all interrupts on given CPU. * 0 = Mask all interrupts on the 'cpu' @@ -191,6 +193,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) } spin_unlock_irqrestore(&wakeupgen_lock, flags); } +#endif #ifdef CONFIG_CPU_PM /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index ef0524c10a84..acb561ea7c11 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -28,7 +28,6 @@ #include <plat/mcspi.h> #include <plat/mcbsp.h> #include <plat/mmc.h> -#include <plat/i2c.h> #include <plat/dmtimer.h> #include <plat/common.h> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 5a65dd04aa38..184ae21feea7 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -28,7 +28,7 @@ static struct omap_device_pm_latency *pm_lats; -static int _init_omap_device(char *name) +static int __init _init_omap_device(char *name) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -49,7 +49,7 @@ static int _init_omap_device(char *name) /* * Build omap_devices for processors and bus. */ -static void omap2_init_processor_devices(void) +static void __init omap2_init_processor_devices(void) { _init_omap_device("mpu"); if (omap3_has_iva()) diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index f97afff68d6d..c0aeabfcf009 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -13,6 +13,7 @@ #include <linux/errno.h> #include <linux/kernel.h> +#include <linux/bug.h> #include "pm.h" #include "cm.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index 6a17e4ca1d79..0f0a9f1592fe 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/bug.h> #include <plat/prcm.h> diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c index a7880af4b3d9..601325b852a4 100644 --- a/arch/arm/mach-omap2/powerdomain44xx.c +++ b/arch/arm/mach-omap2/powerdomain44xx.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/bug.h> #include "powerdomain.h" #include <plat/prcm.h> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 8ef26daeed68..b7ea468eea32 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/bug.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 7e755bb0ffc4..47c77a1d932a 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -1012,7 +1012,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } static struct platform_driver smartreflex_driver = { - .remove = omap_sr_remove, + .remove = __devexit_p(omap_sr_remove), .driver = { .name = "smartreflex", }, diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 9f43fcc05d3e..78c9437913ce 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -69,7 +69,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, sr_data->nvalue_count = count; } -static int sr_dev_init(struct omap_hwmod *oh, void *user) +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) { struct omap_sr_data *sr_data; struct platform_device *pdev; diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 175b7d86d86a..84da34f9a7cf 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/bug.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 0df88820978d..f95c1bad9dc6 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -61,8 +61,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm) vddmin = voltdm->pmic->vp_vddmin; vddmax = voltdm->pmic->vp_vddmax; - waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * - sys_clk_rate) / 1000; + waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate, + 1000 * voltdm->pmic->slew_rate); vstepmin = voltdm->pmic->vp_vstepmin; vstepmax = voltdm->pmic->vp_vstepmax; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c59e8b892d6b..9ec635812349 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -8,47 +8,55 @@ config UX500_SOC_COMMON select PL310_ERRATA_753970 select ARM_ERRATA_754322 select ARM_ERRATA_764369 - -menu "Ux500 SoC" + select CACHE_L2X0 config UX500_SOC_DB5500 - bool "DB5500" + bool select MFD_DB5500_PRCMU config UX500_SOC_DB8500 - bool "DB8500" + bool select MFD_DB8500_PRCMU select REGULATOR_DB8500_PRCMU - -endmenu + select CPU_FREQ_TABLE if CPU_FREQ menu "Ux500 target platform (boards)" -config MACH_U8500 - bool "U8500 Development platform" - depends on UX500_SOC_DB8500 - select TPS6105X +config MACH_MOP500 + bool "U8500 Development platform, MOP500 versions" + select UX500_SOC_DB8500 + select I2C + select I2C_NOMADIK help - Include support for the mop500 development platform. + Include support for the MOP500 development platform. config MACH_HREFV60 - bool "U85000 Development platform, HREFv60 version" - depends on UX500_SOC_DB8500 - help - Include support for the HREFv60 new development platform. + bool "U8500 Development platform, HREFv60 version" + select MACH_MOP500 + help + Include support for the HREFv60 new development platform. + Includes HREFv70, v71 etc. config MACH_SNOWBALL bool "U8500 Snowball platform" - depends on UX500_SOC_DB8500 - select MACH_U8500 + select MACH_MOP500 help Include support for the snowball development platform. config MACH_U5500 bool "U5500 Development platform" - depends on UX500_SOC_DB5500 + select UX500_SOC_DB5500 help Include support for the U5500 development platform. + +config UX500_AUTO_PLATFORM + def_bool y + depends on !MACH_U5500 + select MACH_MOP500 + help + At least one platform needs to be selected in order to build + a working kernel. If everything else is disabled, this + automatically enables MACH_MOP500. endmenu config UX500_DEBUG_UART diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 6bd2f451c185..8dd75f210d2b 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -7,7 +7,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ +obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2735d03996cf..52426a425787 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -74,6 +74,26 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), }; +static struct regulator_consumer_supply ab8500_vaud_consumers[] = { + /* AB8500 audio-codec main supply */ + REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { + /* AB8500 audio-codec Mic1 supply */ + REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { + /* AB8500 audio-codec Mic2 supply */ + REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { + /* AB8500 audio-codec DMic supply */ + REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), +}; + static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { /* SoC core supply, no device */ REGULATOR_SUPPLY("v-intcore", NULL), @@ -323,6 +343,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AUD", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, }, /* supply for v-anamic1 VAMic1-LDO */ [AB8500_LDO_ANAMIC1] = { @@ -330,6 +352,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AMIC1", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, }, /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ [AB8500_LDO_ANAMIC2] = { @@ -337,6 +361,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-AMIC2", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, }, /* supply for v-dmic, VDMIC LDO */ [AB8500_LDO_DMIC] = { @@ -344,6 +370,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .name = "V-DMIC", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), + .consumer_supplies = ab8500_vdmic_consumers, }, /* supply for v-intcore12, VINTCORE12 LDO */ [AB8500_LDO_INTCORE] = { diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index feb5744d98b7..ead91c968ff4 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -8,7 +8,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 5c00712907d1..6d672a556df8 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -72,7 +72,7 @@ static struct platform_device snowball_led_dev = { }; static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { - .gpio_base = MOP500_AB8500_GPIO(0), + .gpio_base = MOP500_AB8500_PIN_GPIO(1), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, /* config_reg is the initial configuration of ab8500 pins. * The pins can be configured as GPIO or alt functions based diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index f926d3db6207..7ff6cbffc104 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -63,7 +63,7 @@ * because the AB8500 GPIO pins are enumbered starting from 1, so the value in * parens matches the GPIO pin number in the data sheet. */ -#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1) +#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1) /*Snowball AB8500 GPIO */ #define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */ #define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */ diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 737907537004..ec35f0aa5665 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -223,6 +223,13 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + /*TODO*/ + return -ENOSYS; +} +EXPORT_SYMBOL(clk_set_parent); + static void clk_prcmu_enable(struct clk *clk) { void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h index 074490705229..d776ada08dbf 100644 --- a/arch/arm/mach-ux500/clock.h +++ b/arch/arm/mach-ux500/clock.h @@ -21,6 +21,7 @@ struct clkops { void (*enable) (struct clk *); void (*disable) (struct clk *); unsigned long (*get_rate) (struct clk *); + int (*set_parent)(struct clk *, struct clk *); }; /** diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index a7c6cdc9b11e..6e66d3777ed5 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -101,6 +101,9 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV41_SD_MM3_TX] = -1, [DB8500_DMA_DEV42_SD_MM4_TX] = -1, [DB8500_DMA_DEV43_SD_MM5_TX] = -1, + [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, }; /* Mapping between source event lines and physical device address */ @@ -133,6 +136,9 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV41_SD_MM3_RX] = -1, [DB8500_DMA_DEV42_SD_MM4_RX] = -1, [DB8500_DMA_DEV43_SD_MM5_RX] = -1, + [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, }; /* Reserved event lines for memcpy only */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index b6ba26a1367d..d93d6dbef25b 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -30,6 +30,8 @@ #include <mach/db8500-regs.h> #include <mach/db5500-regs.h> +#define MSP_TX_RX_REG_OFFSET 0 + #ifndef __ASSEMBLY__ #include <mach/id.h> diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 9db68d264c5f..c23a6b5f0c4e 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -43,7 +43,7 @@ /* This will be overridden by board-specific irq headers */ #define IRQ_BOARD_END IRQ_BOARD_START -#ifdef CONFIG_MACH_U8500 +#ifdef CONFIG_MACH_MOP500 #include <mach/irqs-board-mop500.h> #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index f0726d48df22..c61ec0fc10d4 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -139,15 +139,15 @@ #define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL) @@ -192,54 +192,54 @@ #define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL) #define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL) #define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL) #define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) -#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) -#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) -#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) -#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) #define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) @@ -468,11 +468,11 @@ #define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST) #define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 567e4b54f245..56b6f8b7053e 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -20,7 +20,6 @@ #include <linux/clk.h> #include <linux/mutex.h> #include <linux/cpufreq.h> -#include <linux/debugfs.h> #include <linux/io.h> #include <plat/clock.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 002fb4d96bbc..cb856fe0434a 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2125,7 +2125,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) static struct platform_driver omap_system_dma_driver = { .probe = omap_system_dma_probe, - .remove = omap_system_dma_remove, + .remove = __devexit_p(omap_system_dma_remove), .driver = { .name = "omap_dma_system" }, diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index af3b92be8459..0b77fe87e010 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -80,9 +80,9 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, static void omap_timer_restore_context(struct omap_dm_timer *timer) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET, - timer->context.tiocp_cfg); - if (timer->revision > 1) + __raw_writel(timer->context.tiocp_cfg, + timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); + if (timer->revision == 1) __raw_writel(timer->context.tistat, timer->sys_stat); __raw_writel(timer->context.tisr, timer->irq_stat); @@ -357,6 +357,19 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); + if (timer->loses_context && timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + + /* + * Since the register values are computed and written within + * __omap_dm_timer_stop, we need to use read to retrieve the + * context. + */ + timer->context.tclr = + omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + timer->context.tisr = __raw_readl(timer->irq_stat); + omap_dm_timer_disable(timer); return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 6b51086fce18..4f18eaed4511 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -250,7 +250,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap4430(): True for OMAP4430 * cpu_is_omap3505(): True for OMAP3505 * cpu_is_omap3517(): True for OMAP3517 */ @@ -299,7 +298,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap3505() 0 #define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 -#define cpu_is_omap4430() 0 #define cpu_is_omap3630() 0 /* diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 51423d2727a5..05f7615b61f0 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -100,6 +100,13 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); +struct omap_device *omap_device_alloc(struct platform_device *pdev, + struct omap_hwmod **ohs, int oh_cnt, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt); +void omap_device_delete(struct omap_device *od); +int omap_device_register(struct platform_device *pdev); + void __iomem *omap_device_get_rt_va(struct omap_device *od); struct device *omap_device_get_by_hwmod_name(const char *oh_name); diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 75aa1b2bef51..227ae2657554 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -101,4 +101,5 @@ static inline void omap_push_sram_idle(void) {} #else #define OMAP4_SRAM_PA 0x40300000 #endif +#define AM33XX_SRAM_PA 0x40300000 #endif diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ad80112c2275..ad32621aa52e 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -307,7 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) if (!--mbox->use_count) { free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); - flush_work_sync(&mbox->rxq->work); + flush_work_sync(&mbox->rxq->work); mbox_queue_free(mbox->txq); mbox_queue_free(mbox->rxq); } diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index e8d98693d2dd..2d00ab01d150 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -1,3 +1,4 @@ + /* * omap_device implementation * @@ -97,14 +98,7 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 -static int omap_device_register(struct platform_device *pdev); static int omap_early_device_register(struct platform_device *pdev); -static struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); -static void omap_device_delete(struct omap_device *od); - static struct omap_device_pm_latency omap_default_latency[] = { { @@ -509,7 +503,7 @@ static int omap_device_fill_resources(struct omap_device *od, * * Returns an struct omap_device pointer or ERR_PTR() on error; */ -static struct omap_device *omap_device_alloc(struct platform_device *pdev, +struct omap_device *omap_device_alloc(struct platform_device *pdev, struct omap_hwmod **ohs, int oh_cnt, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt) @@ -591,7 +585,7 @@ oda_exit1: return ERR_PTR(ret); } -static void omap_device_delete(struct omap_device *od) +void omap_device_delete(struct omap_device *od) { if (!od) return; @@ -619,7 +613,7 @@ static void omap_device_delete(struct omap_device *od) * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, * passes along the return value of omap_device_build_ss(). */ -struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -652,7 +646,7 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, * platform_device record. Returns an ERR_PTR() on error, or passes * along the return value of omap_device_register(). */ -struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **ohs, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -717,7 +711,7 @@ odbs_exit: * platform_early_add_device() on the underlying platform_device. * Returns 0 by default. */ -static int omap_early_device_register(struct platform_device *pdev) +static int __init omap_early_device_register(struct platform_device *pdev) { struct platform_device *devices[1]; @@ -817,7 +811,7 @@ static struct dev_pm_domain omap_device_pm_domain = { * platform_device_register() on the underlying platform_device. * Returns the return value of platform_device_register(). */ -static int omap_device_register(struct platform_device *pdev) +int omap_device_register(struct platform_device *pdev) { pr_debug("omap_device: %s: registering\n", pdev->name); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4243bdcc87bc..596f2224e15a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -86,7 +86,7 @@ static int is_sram_locked(void) __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() && !cpu_is_am33xx()) { __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ @@ -124,7 +124,10 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x800; /* 2K */ } } else { - if (cpu_is_omap34xx()) { + if (cpu_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else if (cpu_is_omap44xx()) { @@ -368,6 +371,11 @@ static inline int omap34xx_sram_init(void) return 0; } +static inline int am33xx_sram_init(void) +{ + return 0; +} + int __init omap_sram_init(void) { omap_detect_sram(); @@ -379,6 +387,8 @@ int __init omap_sram_init(void) omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); + else if (cpu_is_am33xx()) + am33xx_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); |