diff options
Diffstat (limited to 'arch/arm/mach-at91/at91sam9g45_devices.c')
| -rw-r--r-- | arch/arm/mach-at91/at91sam9g45_devices.c | 147 |
1 files changed, 140 insertions, 7 deletions
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 96e2adcd5a84..698479f1e197 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -14,6 +14,7 @@ #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> @@ -24,11 +25,15 @@ #include <mach/board.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at_hdmac.h> #include <mach/atmel-mci.h> +#include <media/atmel-isi.h> + #include "generic.h" +#include "clock.h" /* -------------------------------------------------------------------- @@ -432,7 +437,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) /* DMA slave channel configuration */ atslave->dma_dev = &at_hdmac_device.dev; - atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT; atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW; atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16; @@ -553,8 +557,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -870,6 +874,96 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} #endif +/* -------------------------------------------------------------------- + * Image Sensor Interface + * -------------------------------------------------------------------- */ +#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE) +static u64 isi_dmamask = DMA_BIT_MASK(32); +static struct isi_platform_data isi_data; + +struct resource isi_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_ISI, + .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_ISI, + .end = AT91SAM9G45_ID_ISI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_isi_device = { + .name = "atmel_isi", + .id = 0, + .dev = { + .dma_mask = &isi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &isi_data, + }, + .resource = isi_resources, + .num_resources = ARRAY_SIZE(isi_resources), +}; + +static struct clk_lookup isi_mck_lookups[] = { + CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL), +}; + +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) +{ + struct clk *pck; + struct clk *parent; + + if (!data) + return; + isi_data = *data; + + at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */ + at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */ + at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */ + at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */ + at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */ + + platform_device_register(&at91sam9g45_isi_device); + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */ + + pck = clk_get(NULL, "pck1"); + parent = clk_get(NULL, "plla"); + + BUG_ON(IS_ERR(pck) || IS_ERR(parent)); + + if (clk_set_parent(pck, parent)) { + pr_err("Failed to set PCK's parent\n"); + } else { + /* Register PCK as ISI_MCK */ + isi_mck_lookups[0].clk = pck; + clkdev_add_table(isi_mck_lookups, + ARRAY_SIZE(isi_mck_lookups)); + } + + clk_put(pck); + clk_put(parent); + } +} +#else +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} +#endif + /* -------------------------------------------------------------------- * LCD Controller @@ -957,7 +1051,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} static struct resource tcb0_resources[] = { [0] = { .start = AT91SAM9G45_BASE_TCB0, - .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1, + .end = AT91SAM9G45_BASE_TCB0 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -978,7 +1072,7 @@ static struct platform_device at91sam9g45_tcb0_device = { static struct resource tcb1_resources[] = { [0] = { .start = AT91SAM9G45_BASE_TCB1, - .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1, + .end = AT91SAM9G45_BASE_TCB1 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -995,8 +1089,25 @@ static struct platform_device at91sam9g45_tcb1_device = { .num_resources = ARRAY_SIZE(tcb1_resources), }; +#if defined(CONFIG_OF) +static struct of_device_id tcb_ids[] = { + { .compatible = "atmel,at91rm9200-tcb" }, + { /*sentinel*/ } +}; +#endif + static void __init at91_add_device_tc(void) { +#if defined(CONFIG_OF) + struct device_node *np; + + np = of_find_matching_node(NULL, tcb_ids); + if (np) { + of_node_put(np); + return; + } +#endif + platform_device_register(&at91sam9g45_tcb0_device); platform_device_register(&at91sam9g45_tcb1_device); } @@ -1099,6 +1210,8 @@ static struct resource rtt_resources[] = { .start = AT91SAM9G45_BASE_RTT, .end = AT91SAM9G45_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -1106,11 +1219,32 @@ static struct platform_device at91sam9g45_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9g45_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9g45_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9g45_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9g45_rtt_device); } @@ -1565,7 +1699,6 @@ static inline void configure_usart3_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { |