summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt2
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/goodix.txt50
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/goodix.yaml78
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt40
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml83
-rw-r--r--drivers/input/misc/axp20x-pek.c45
-rw-r--r--drivers/input/rmi4/rmi_f11.c14
-rw-r--r--drivers/input/serio/Kconfig10
-rw-r--r--drivers/input/serio/Makefile1
-rw-r--r--drivers/input/serio/apbps2.c2
-rw-r--r--drivers/input/serio/ioc3kbd.c216
-rw-r--r--drivers/input/touchscreen/ads7846.c15
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c55
-rw-r--r--drivers/input/touchscreen/elants_i2c.c77
14 files changed, 544 insertions, 144 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 0f6950073d6f..0e57315e9cbd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -36,6 +36,8 @@ Optional properties:
- pinctrl-0: a phandle pointing to the pin settings for the
control gpios
+ - wakeup-source: If present the device will act as wakeup-source
+
- threshold: allows setting the "click"-threshold in the range
from 0 to 80.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
deleted file mode 100644
index fc03ea4cf5ab..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Device tree bindings for Goodix GT9xx series touchscreen controller
-
-Required properties:
-
- - compatible : Should be "goodix,gt1151"
- or "goodix,gt5663"
- or "goodix,gt5688"
- or "goodix,gt911"
- or "goodix,gt9110"
- or "goodix,gt912"
- or "goodix,gt927"
- or "goodix,gt9271"
- or "goodix,gt928"
- or "goodix,gt967"
- - reg : I2C address of the chip. Should be 0x5d or 0x14
- - interrupts : Interrupt to which the chip is connected
-
-Optional properties:
-
- - irq-gpios : GPIO pin used for IRQ. The driver uses the
- interrupt gpio pin as output to reset the device.
- - reset-gpios : GPIO pin used for reset
- - AVDD28-supply : Analog power supply regulator on AVDD28 pin
- - VDDIO-supply : GPIO power supply regulator on VDDIO pin
- - touchscreen-inverted-x
- - touchscreen-inverted-y
- - touchscreen-size-x
- - touchscreen-size-y
- - touchscreen-swapped-x-y
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
- i2c@00000000 {
- /* ... */
-
- gt928@5d {
- compatible = "goodix,gt928";
- reg = <0x5d>;
- interrupt-parent = <&gpio>;
- interrupts = <0 0>;
-
- irq-gpios = <&gpio1 0 0>;
- reset-gpios = <&gpio1 1 0>;
- };
-
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
new file mode 100644
index 000000000000..d7c3262b2494
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT9xx series touchscreen controller Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - goodix,gt1151
+ - goodix,gt5663
+ - goodix,gt5688
+ - goodix,gt911
+ - goodix,gt9110
+ - goodix,gt912
+ - goodix,gt927
+ - goodix,gt9271
+ - goodix,gt928
+ - goodix,gt967
+
+ reg:
+ enum: [ 0x5d, 0x14 ]
+
+ interrupts:
+ maxItems: 1
+
+ irq-gpios:
+ description: GPIO pin used for IRQ.
+ The driver uses the interrupt gpio pin as
+ output to reset the device.
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ AVDD28-supply:
+ description: Analog power supply regulator on AVDD28 pin
+
+ VDDIO-supply:
+ description: GPIO power supply regulator on VDDIO pin
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+- |
+ i2c@00000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gt928@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <0 0>;
+ irq-gpios = <&gpio1 0 0>;
+ reset-gpios = <&gpio1 1 0>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
index 8641a2d70851..e1adb902d503 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -1,39 +1 @@
-General Touchscreen Properties:
-
-Optional properties for Touchscreens:
- - touchscreen-min-x : minimum x coordinate reported (0 if not set)
- - touchscreen-min-y : minimum y coordinate reported (0 if not set)
- - touchscreen-size-x : horizontal resolution of touchscreen
- (maximum x coordinate reported + 1)
- - touchscreen-size-y : vertical resolution of touchscreen
- (maximum y coordinate reported + 1)
- - touchscreen-max-pressure : maximum reported pressure (arbitrary range
- dependent on the controller)
- - touchscreen-min-pressure : minimum pressure on the touchscreen to be
- achieved in order for the touchscreen
- driver to report a touch event.
- - touchscreen-fuzz-x : horizontal noise value of the absolute input
- device (in pixels)
- - touchscreen-fuzz-y : vertical noise value of the absolute input
- device (in pixels)
- - touchscreen-fuzz-pressure : pressure noise value of the absolute input
- device (arbitrary range dependent on the
- controller)
- - touchscreen-average-samples : Number of data samples which are averaged
- for each read (valid values dependent on the
- controller)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
- Swapping is done after inverting the axis
- - touchscreen-x-mm : horizontal length in mm of the touchscreen
- - touchscreen-y-mm : vertical length in mm of the touchscreen
-
-Deprecated properties for Touchscreens:
- - x-size : deprecated name for touchscreen-size-x
- - y-size : deprecated name for touchscreen-size-y
- - moving-threshold : deprecated name for a combination of
- touchscreen-fuzz-x and touchscreen-fuzz-y
- - contact-threshold : deprecated name for touchscreen-fuzz-pressure
- - x-invert : deprecated name for touchscreen-inverted-x
- - y-invert : deprecated name for touchscreen-inverted-y
+See touchscreen.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
new file mode 100644
index 000000000000..d7dac16a3960
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common touchscreen Bindings
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+ touchscreen-min-x:
+ description: minimum x coordinate reported
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ touchscreen-min-y:
+ description: minimum y coordinate reported
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ touchscreen-size-x:
+ description: horizontal resolution of touchscreen (maximum x coordinate reported + 1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-size-y:
+ description: vertical resolution of touchscreen (maximum y coordinate reported + 1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-max-pressure:
+ description: maximum reported pressure (arbitrary range dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-min-pressure:
+ description: minimum pressure on the touchscreen to be achieved in order for the
+ touchscreen driver to report a touch event.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-x:
+ description: horizontal noise value of the absolute input device (in pixels)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-y:
+ description: vertical noise value of the absolute input device (in pixels)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-fuzz-pressure:
+ description: pressure noise value of the absolute input device (arbitrary range
+ dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-average-samples:
+ description: Number of data samples which are averaged for each read (valid values
+ dependent on the controller)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-inverted-x:
+ description: X axis is inverted
+ type: boolean
+
+ touchscreen-inverted-y:
+ description: Y axis is inverted
+ type: boolean
+
+ touchscreen-swapped-x-y:
+ description: X and Y axis are swapped
+ Swapping is done after inverting the axis
+ type: boolean
+
+ touchscreen-x-mm:
+ description: horizontal length in mm of the touchscreen
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ touchscreen-y-mm:
+ description: vertical length in mm of the touchscreen
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+ touchscreen-size-x: [ touchscreen-size-y ]
+ touchscreen-size-y: [ touchscreen-size-x ]
+ touchscreen-x-mm: [ touchscreen-y-mm ]
+ touchscreen-y-mm: [ touchscreen-x-mm ]
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
index 17c1cca74498..c8f87df93a50 100644
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@@ -191,9 +191,10 @@ static ssize_t axp20x_store_attr_shutdown(struct device *dev,
axp20x_pek->info->shutdown_mask, buf, count);
}
-DEVICE_ATTR(startup, 0644, axp20x_show_attr_startup, axp20x_store_attr_startup);
-DEVICE_ATTR(shutdown, 0644, axp20x_show_attr_shutdown,
- axp20x_store_attr_shutdown);
+static DEVICE_ATTR(startup, 0644, axp20x_show_attr_startup,
+ axp20x_store_attr_startup);
+static DEVICE_ATTR(shutdown, 0644, axp20x_show_attr_shutdown,
+ axp20x_store_attr_shutdown);
static struct attribute *axp20x_attrs[] = {
&dev_attr_startup.attr,
@@ -279,8 +280,7 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
return error;
}
- if (axp20x_pek->axp20x->variant == AXP288_ID)
- enable_irq_wake(axp20x_pek->irq_dbr);
+ device_init_wakeup(&pdev->dev, true);
return 0;
}
@@ -352,6 +352,40 @@ static int axp20x_pek_probe(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused axp20x_pek_suspend(struct device *dev)
+{
+ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+
+ /*
+ * As nested threaded IRQs are not automatically disabled during
+ * suspend, we must explicitly disable non-wakeup IRQs.
+ */
+ if (device_may_wakeup(dev)) {
+ enable_irq_wake(axp20x_pek->irq_dbf);
+ enable_irq_wake(axp20x_pek->irq_dbr);
+ } else {
+ disable_irq(axp20x_pek->irq_dbf);
+ disable_irq(axp20x_pek->irq_dbr);
+ }
+
+ return 0;
+}
+
+static int __maybe_unused axp20x_pek_resume(struct device *dev)
+{
+ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev)) {
+ disable_irq_wake(axp20x_pek->irq_dbf);
+ disable_irq_wake(axp20x_pek->irq_dbr);
+ } else {
+ enable_irq(axp20x_pek->irq_dbf);
+ enable_irq(axp20x_pek->irq_dbr);
+ }
+
+ return 0;
+}
+
static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev)
{
struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
@@ -371,6 +405,7 @@ static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev)
}
static const struct dev_pm_ops axp20x_pek_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(axp20x_pek_suspend, axp20x_pek_resume)
#ifdef CONFIG_PM_SLEEP
.resume_noirq = axp20x_pek_resume_noirq,
#endif
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index bbf9ae9f3f0c..6adea8a3e8fb 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -412,6 +412,10 @@ struct f11_2d_sensor_queries {
/* Defs for Ctrl0. */
#define RMI_F11_REPORT_MODE_MASK 0x07
+#define RMI_F11_REPORT_MODE_CONTINUOUS (0 << 0)
+#define RMI_F11_REPORT_MODE_REDUCED (1 << 0)
+#define RMI_F11_REPORT_MODE_FS_CHANGE (2 << 0)
+#define RMI_F11_REPORT_MODE_FP_CHANGE (3 << 0)
#define RMI_F11_ABS_POS_FILT (1 << 3)
#define RMI_F11_REL_POS_FILT (1 << 4)
#define RMI_F11_REL_BALLISTICS (1 << 5)
@@ -1195,6 +1199,16 @@ static int rmi_f11_initialize(struct rmi_function *fn)
ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
sensor->axis_align.delta_y_threshold;
+ /*
+ * If distance threshold values are set, switch to reduced reporting
+ * mode so they actually get used by the controller.
+ */
+ if (ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] ||
+ ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD]) {
+ ctrl->ctrl0_11[0] &= ~RMI_F11_REPORT_MODE_MASK;
+ ctrl->ctrl0_11[0] |= RMI_F11_REPORT_MODE_REDUCED;
+ }
+
if (f11->sens_query.has_dribble) {
switch (sensor->dribble) {
case RMI_REG_STATE_OFF:
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f3e18f8ef9ca..373a1646019e 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -165,6 +165,16 @@ config SERIO_MACEPS2
To compile this driver as a module, choose M here: the
module will be called maceps2.
+config SERIO_SGI_IOC3
+ tristate "SGI IOC3 PS/2 controller"
+ depends on SGI_MFD_IOC3
+ help
+ Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
+ and you want to attach and use a keyboard, mouse, or both.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ioc3kbd.
+
config SERIO_LIBPS2
tristate "PS/2 driver library"
depends on SERIO_I8042 || SERIO_I8042=n
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
index 67950a5ccb3f..6d97bad7b844 100644
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC) += hp_sdc_mlc.o hil_mlc.o
obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o
obj-$(CONFIG_SERIO_PS2MULT) += ps2mult.o
obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o
+obj-$(CONFIG_SERIO_SGI_IOC3) += ioc3kbd.o
obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
obj-$(CONFIG_SERIO_RAW) += serio_raw.o
obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o
diff --git a/drivers/input/serio/apbps2.c b/drivers/input/serio/apbps2.c
index f290d5d146c3..594ac4e6f8ea 100644
--- a/drivers/input/serio/apbps2.c
+++ b/drivers/input/serio/apbps2.c
@@ -51,7 +51,7 @@ struct apbps2_regs {
struct apbps2_priv {
struct serio *io;
- struct apbps2_regs *regs;
+ struct apbps2_regs __iomem *regs;
};
static int apbps2_idx;
diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
new file mode 100644
index 000000000000..d51bfe912db5
--- /dev/null
+++ b/drivers/input/serio/ioc3kbd.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 PS/2 controller driver for linux
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
+ * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sn/ioc3.h>
+
+struct ioc3kbd_data {
+ struct ioc3_serioregs __iomem *regs;
+ struct serio *kbd, *aux;
+ bool kbd_exists, aux_exists;
+ int irq;
+};
+
+static int ioc3kbd_wait(struct ioc3_serioregs __iomem *regs, u32 mask)
+{
+ unsigned long timeout = 0;
+
+ while ((readl(&regs->km_csr) & mask) && (timeout < 250)) {
+ udelay(50);
+ timeout++;
+ }
+ return (timeout >= 250) ? -ETIMEDOUT : 0;
+}
+
+static int ioc3kbd_write(struct serio *dev, u8 val)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+ int ret;
+
+ ret = ioc3kbd_wait(d->regs, KM_CSR_K_WRT_PEND);
+ if (ret)
+ return ret;
+
+ writel(val, &d->regs->k_wd);
+
+ return 0;
+}
+
+static int ioc3kbd_start(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->kbd_exists = true;
+ return 0;
+}
+
+static void ioc3kbd_stop(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->kbd_exists = false;
+}
+
+static int ioc3aux_write(struct serio *dev, u8 val)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+ int ret;
+
+ ret = ioc3kbd_wait(d->regs, KM_CSR_M_WRT_PEND);
+ if (ret)
+ return ret;
+
+ writel(val, &d->regs->m_wd);
+
+ return 0;
+}
+
+static int ioc3aux_start(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->aux_exists = true;
+ return 0;
+}
+
+static void ioc3aux_stop(struct serio *dev)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+
+ d->aux_exists = false;
+}
+
+static void ioc3kbd_process_data(struct serio *dev, u32 data)
+{
+ if (data & KM_RD_VALID_0)
+ serio_interrupt(dev, (data >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
+ if (data & KM_RD_VALID_1)
+ serio_interrupt(dev, (data >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
+ if (data & KM_RD_VALID_2)
+ serio_interrupt(dev, (data >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
+}
+
+static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
+{
+ struct ioc3kbd_data *d = dev_id;
+ u32 data_k, data_m;
+
+ data_k = readl(&d->regs->k_rd);
+ if (d->kbd_exists)
+ ioc3kbd_process_data(d->kbd, data_k);
+
+ data_m = readl(&d->regs->m_rd);
+ if (d->aux_exists)
+ ioc3kbd_process_data(d->aux, data_m);
+
+ return IRQ_HANDLED;
+}
+
+static int ioc3kbd_probe(struct platform_device *pdev)
+{
+ struct ioc3_serioregs __iomem *regs;
+ struct device *dev = &pdev->dev;
+ struct ioc3kbd_data *d;
+ struct serio *sk, *sa;
+ int irq, ret;
+
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ sk = kzalloc(sizeof(*sk), GFP_KERNEL);
+ if (!sk)
+ return -ENOMEM;
+
+ sa = kzalloc(sizeof(*sa), GFP_KERNEL);
+ if (!sa) {
+ kfree(sk);
+ return -ENOMEM;
+ }
+
+ sk->id.type = SERIO_8042;
+ sk->write = ioc3kbd_write;
+ sk->start = ioc3kbd_start;
+ sk->stop = ioc3kbd_stop;
+ snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
+ snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
+ sk->port_data = d;
+ sk->dev.parent = dev;
+
+ sa->id.type = SERIO_8042;
+ sa->write = ioc3aux_write;
+ sa->start = ioc3aux_start;
+ sa->stop = ioc3aux_stop;
+ snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
+ snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
+ sa->port_data = d;
+ sa->dev.parent = dev;
+
+ d->regs = regs;
+ d->kbd = sk;
+ d->aux = sa;
+ d->irq = irq;
+
+ platform_set_drvdata(pdev, d);
+ serio_register_port(d->kbd);
+ serio_register_port(d->aux);
+
+ ret = request_irq(irq, ioc3kbd_intr, IRQF_SHARED, "ioc3-kbd", d);
+ if (ret) {
+ dev_err(dev, "could not request IRQ %d\n", irq);
+ serio_unregister_port(d->kbd);
+ serio_unregister_port(d->aux);
+ return ret;
+ }
+
+ /* enable ports */
+ writel(KM_CSR_K_CLAMP_3 | KM_CSR_M_CLAMP_3, &regs->km_csr);
+
+ return 0;
+}
+
+static int ioc3kbd_remove(struct platform_device *pdev)
+{
+ struct ioc3kbd_data *d = platform_get_drvdata(pdev);
+
+ free_irq(d->irq, d);
+
+ serio_unregister_port(d->kbd);
+ serio_unregister_port(d->aux);
+
+ return 0;
+}
+
+static struct platform_driver ioc3kbd_driver = {
+ .probe = ioc3kbd_probe,
+ .remove = ioc3kbd_remove,
+ .driver = {
+ .name = "ioc3-kbd",
+ },
+};
+module_platform_driver(ioc3kbd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 serio driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 51ddb204ca1b..8fd7fc39c4fd 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -333,7 +333,8 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
req->xfer[1].len = 2;
/* for 1uF, settle for 800 usec; no cap, 100 usec. */
- req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+ req->xfer[1].delay.value = ts->vref_delay_usecs;
+ req->xfer[1].delay.unit = SPI_DELAY_UNIT_USECS;
spi_message_add_tail(&req->xfer[1], &req->msg);
/* Enable reference voltage */
@@ -1018,7 +1019,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,
* have had enough time to stabilize.
*/
if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
+ x->delay.value = pdata->settle_delay_usecs;
+ x->delay.unit = SPI_DELAY_UNIT_USECS;
x++;
x->tx_buf = &packet->read_y;
@@ -1061,7 +1063,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,
/* ... maybe discard first sample ... */
if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
+ x->delay.value = pdata->settle_delay_usecs;
+ x->delay.unit = SPI_DELAY_UNIT_USECS;
x++;
x->tx_buf = &packet->read_x;
@@ -1094,7 +1097,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,
/* ... maybe discard first sample ... */
if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
+ x->delay.value = pdata->settle_delay_usecs;
+ x->delay.unit = SPI_DELAY_UNIT_USECS;
x++;
x->tx_buf = &packet->read_z1;
@@ -1125,7 +1129,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,
/* ... maybe discard first sample ... */
if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
+ x->delay.value = pdata->settle_delay_usecs;
+ x->delay.unit = SPI_DELAY_UNIT_USECS;
x++;
x->tx_buf = &packet->read_z2;
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d61731c0037d..d2587724c52a 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -13,22 +13,23 @@
* http://www.glyn.com/Products/Displays
*/
-#include <linux/module.h>
-#include <linux/ratelimit.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/kernel.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
#include <linux/debugfs.h>
-#include <linux/slab.h>
+#include <linux/delay.h>
#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
-#include <asm/unaligned.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <asm/unaligned.h>
#define WORK_REGISTER_THRESHOLD 0x00
#define WORK_REGISTER_REPORT_RATE 0x08
@@ -1050,6 +1051,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
{
const struct edt_i2c_chip_data *chip_data;
struct edt_ft5x06_ts_data *tsdata;
+ u8 buf[2] = { 0xfc, 0x00 };
struct input_dev *input;
unsigned long irq_flags;
int error;
@@ -1140,6 +1142,12 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
return error;
}
+ /*
+ * Dummy read access. EP0700MLP1 returns bogus data on the first
+ * register read access and ignores writes.
+ */
+ edt_ft5x06_ts_readwrite(tsdata->client, 2, buf, 2, buf);
+
edt_ft5x06_ts_set_regs(tsdata);
edt_ft5x06_ts_get_defaults(&client->dev, tsdata);
edt_ft5x06_ts_get_parameters(tsdata);
@@ -1200,7 +1208,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
return error;
edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
- device_init_wakeup(&client->dev, 1);
dev_dbg(&client->dev,
"EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n",
@@ -1220,29 +1227,6 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
return 0;
}
-static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- if (device_may_wakeup(dev))
- enable_irq_wake(client->irq);
-
- return 0;
-}
-
-static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- if (device_may_wakeup(dev))
- disable_irq_wake(client->irq);
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
- edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
-
static const struct edt_i2c_chip_data edt_ft5x06_data = {
.max_support_points = 5,
};
@@ -1281,7 +1265,6 @@ static struct i2c_driver edt_ft5x06_ts_driver = {
.driver = {
.name = "edt_ft5x06",
.of_match_table = edt_ft5x06_of_match,
- .pm = &edt_ft5x06_ts_pm_ops,
},
.id_table = edt_ft5x06_ts_id,
.probe = edt_ft5x06_ts_probe,
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index d4ad24ea54c8..491179967b29 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -59,8 +59,10 @@
#define CMD_HEADER_WRITE 0x54
#define CMD_HEADER_READ 0x53
#define CMD_HEADER_6B_READ 0x5B
+#define CMD_HEADER_ROM_READ 0x96
#define CMD_HEADER_RESP 0x52
#define CMD_HEADER_6B_RESP 0x9B
+#define CMD_HEADER_ROM_RESP 0x95
#define CMD_HEADER_HELLO 0x55
#define CMD_HEADER_REK 0x66
@@ -200,6 +202,10 @@ static int elants_i2c_execute_command(struct i2c_client *client,
expected_response = CMD_HEADER_6B_RESP;
break;
+ case CMD_HEADER_ROM_READ:
+ expected_response = CMD_HEADER_ROM_RESP;
+ break;
+
default:
dev_err(&client->dev, "%s: invalid command %*ph\n",
__func__, (int)cmd_size, cmd);
@@ -556,6 +562,8 @@ static int elants_i2c_initialize(struct elants_data *ts)
/* hw version is available even if device in recovery state */
error2 = elants_i2c_query_hw_version(ts);
+ if (!error2)
+ error2 = elants_i2c_query_bc_version(ts);
if (!error)
error = error2;
@@ -564,8 +572,6 @@ static int elants_i2c_initialize(struct elants_data *ts)
if (!error)
error = elants_i2c_query_test_version(ts);
if (!error)
- error = elants_i2c_query_bc_version(ts);
- if (!error)
error = elants_i2c_query_ts_info(ts);
if (error)
@@ -613,39 +619,94 @@ static int elants_i2c_fw_write_page(struct i2c_client *client,
return error;
}
+static int elants_i2c_validate_remark_id(struct elants_data *ts,
+ const struct firmware *fw)
+{
+ struct i2c_client *client = ts->client;
+ int error;
+ const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21 };
+ u8 resp[6] = { 0 };
+ u16 ts_remark_id = 0;
+ u16 fw_remark_id = 0;
+
+ /* Compare TS Remark ID and FW Remark ID */
+ error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+ resp, sizeof(resp));
+ if (error) {
+ dev_err(&client->dev, "failed to query Remark ID: %d\n", error);
+ return error;
+ }
+
+ ts_remark_id = get_unaligned_be16(&resp[3]);
+
+ fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
+
+ if (fw_remark_id != ts_remark_id) {
+ dev_err(&client->dev,
+ "Remark ID Mismatched: ts_remark_id=0x%04x, fw_remark_id=0x%04x.\n",
+ ts_remark_id, fw_remark_id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int elants_i2c_do_update_firmware(struct i2c_client *client,
const struct firmware *fw,
bool force)
{
+ struct elants_data *ts = i2c_get_clientdata(client);
const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
- const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
+ const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
u8 buf[HEADER_SIZE];
u16 send_id;
int page, n_fw_pages;
int error;
+ bool check_remark_id = ts->iap_version >= 0x60;
/* Recovery mode detection! */
if (force) {
dev_dbg(&client->dev, "Recovery mode procedure\n");
+
+ if (check_remark_id) {
+ error = elants_i2c_validate_remark_id(ts, fw);
+ if (error)
+ return error;
+ }
+
error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2));
+ if (error) {
+ dev_err(&client->dev, "failed to enter IAP mode: %d\n",
+ error);
+ return error;
+ }
} else {
/* Start IAP Procedure */
dev_dbg(&client->dev, "Normal IAP procedure\n");
+
/* Close idle mode */
error = elants_i2c_send(client, close_idle, sizeof(close_idle));
if (error)
dev_err(&client->dev, "Failed close idle: %d\n", error);
msleep(60);
+
elants_i2c_sw_reset(client);
msleep(20);
- error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
- }
- if (error) {
- dev_err(&client->dev, "failed to enter IAP mode: %d\n", error);
- return error;
+ if (check_remark_id) {
+ error = elants_i2c_validate_remark_id(ts, fw);
+ if (error)
+ return error;
+ }
+
+ error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
+ if (error) {
+ dev_err(&client->dev, "failed to enter IAP mode: %d\n",
+ error);
+ return error;
+ }
}
msleep(20);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 12:40:53 +0000