summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml26
-rw-r--r--drivers/spi/spi-fsl-dspi.c8
-rw-r--r--drivers/spi/spi-rspi.c28
-rw-r--r--drivers/spi/spi-sprd-adi.c2
-rw-r--r--drivers/spi/spi-stm32-qspi.c46
-rw-r--r--drivers/spi/spidev.c24
-rw-r--r--include/uapi/linux/spi/spidev.h4
-rw-r--r--tools/spi/spidev_test.c10
8 files changed, 90 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 9147df29022a..38efb50081e3 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -34,12 +34,15 @@ properties:
maxItems: 1
clocks:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: controller register bus clock
+ - description: baud rate generator and delay control clock
clock-names:
- description: input clock for the baud rate generator
- items:
- - const: core
+ minItems: 1
+ maxItems: 2
if:
properties:
@@ -51,17 +54,22 @@ if:
then:
properties:
clocks:
- contains:
- items:
- - description: controller register bus clock
- - description: baud rate generator and delay control clock
+ minItems: 2
clock-names:
- minItems: 2
items:
- const: core
- const: pclk
+else:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: core
+
required:
- compatible
- reg
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index a35faced0456..58190c94561f 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -588,14 +588,14 @@ static void dspi_release_dma(struct fsl_dspi *dspi)
return;
if (dma->chan_tx) {
- dma_unmap_single(dma->chan_tx->device->dev, dma->tx_dma_phys,
- dma_bufsize, DMA_TO_DEVICE);
+ dma_free_coherent(dma->chan_tx->device->dev, dma_bufsize,
+ dma->tx_dma_buf, dma->tx_dma_phys);
dma_release_channel(dma->chan_tx);
}
if (dma->chan_rx) {
- dma_unmap_single(dma->chan_rx->device->dev, dma->rx_dma_phys,
- dma_bufsize, DMA_FROM_DEVICE);
+ dma_free_coherent(dma->chan_rx->device->dev, dma_bufsize,
+ dma->rx_dma_buf, dma->rx_dma_phys);
dma_release_channel(dma->chan_rx);
}
}
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 06192c9ea813..cbc2387d450c 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -179,7 +179,7 @@
struct rspi_data {
void __iomem *addr;
- u32 max_speed_hz;
+ u32 speed_hz;
struct spi_controller *ctlr;
struct platform_device *pdev;
wait_queue_head_t wait;
@@ -258,8 +258,7 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
/* Sets transfer bit rate */
- spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk),
- 2 * rspi->max_speed_hz) - 1;
+ spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->speed_hz) - 1;
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
/* Disable dummy transmission, set 16-bit word access, 1 frame */
@@ -299,14 +298,14 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
clksrc = clk_get_rate(rspi->clk);
while (div < 3) {
- if (rspi->max_speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
+ if (rspi->speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
break;
div++;
clksrc /= 2;
}
/* Sets transfer bit rate */
- spbr = DIV_ROUND_UP(clksrc, 2 * rspi->max_speed_hz) - 1;
+ spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz) - 1;
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
rspi->spcmd |= div << 2;
@@ -341,7 +340,7 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
/* Sets transfer bit rate */
- spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz);
+ spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->speed_hz);
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
/* Disable dummy transmission, set byte access */
@@ -949,9 +948,24 @@ static int rspi_prepare_message(struct spi_controller *ctlr,
{
struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
struct spi_device *spi = msg->spi;
+ const struct spi_transfer *xfer;
int ret;
- rspi->max_speed_hz = spi->max_speed_hz;
+ /*
+ * As the Bit Rate Register must not be changed while the device is
+ * active, all transfers in a message must use the same bit rate.
+ * In theory, the sequencer could be enabled, and each Command Register
+ * could divide the base bit rate by a different value.
+ * However, most RSPI variants do not have Transfer Data Length
+ * Multiplier Setting Registers, so each sequence step would be limited
+ * to a single word, making this feature unsuitable for large
+ * transfers, which would gain most from it.
+ */
+ rspi->speed_hz = spi->max_speed_hz;
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ if (xfer->speed_hz < rspi->speed_hz)
+ rspi->speed_hz = xfer->speed_hz;
+ }
rspi->spcmd = SPCMD_SSLKP;
if (spi->mode & SPI_CPOL)
diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
index 88e6543648cb..bd23c4689b46 100644
--- a/drivers/spi/spi-sprd-adi.c
+++ b/drivers/spi/spi-sprd-adi.c
@@ -389,9 +389,9 @@ static int sprd_adi_restart_handler(struct notifier_block *this,
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val);
/* Load the watchdog timeout value, 50ms is always enough. */
+ sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_HIGH, 0);
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_LOW,
WDG_LOAD_VAL & WDG_LOAD_MASK);
- sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_HIGH, 0);
/* Start the watchdog to reset system */
sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val);
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 3c44bb2fd9b1..a900962b4336 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -553,20 +553,6 @@ static const struct spi_controller_mem_ops stm32_qspi_mem_ops = {
.exec_op = stm32_qspi_exec_op,
};
-static void stm32_qspi_release(struct stm32_qspi *qspi)
-{
- pm_runtime_get_sync(qspi->dev);
- /* disable qspi */
- writel_relaxed(0, qspi->io_base + QSPI_CR);
- stm32_qspi_dma_free(qspi);
- mutex_destroy(&qspi->lock);
- pm_runtime_put_noidle(qspi->dev);
- pm_runtime_disable(qspi->dev);
- pm_runtime_set_suspended(qspi->dev);
- pm_runtime_dont_use_autosuspend(qspi->dev);
- clk_disable_unprepare(qspi->clk);
-}
-
static int stm32_qspi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -642,7 +628,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
if (IS_ERR(rstc)) {
ret = PTR_ERR(rstc);
if (ret == -EPROBE_DEFER)
- goto err_qspi_release;
+ goto err_clk_disable;
} else {
reset_control_assert(rstc);
udelay(2);
@@ -653,7 +639,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qspi);
ret = stm32_qspi_dma_setup(qspi);
if (ret)
- goto err_qspi_release;
+ goto err_dma_free;
mutex_init(&qspi->lock);
@@ -673,15 +659,26 @@ static int stm32_qspi_probe(struct platform_device *pdev)
ret = devm_spi_register_master(dev, ctrl);
if (ret)
- goto err_qspi_release;
+ goto err_pm_runtime_free;
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return 0;
-err_qspi_release:
- stm32_qspi_release(qspi);
+err_pm_runtime_free:
+ pm_runtime_get_sync(qspi->dev);
+ /* disable qspi */
+ writel_relaxed(0, qspi->io_base + QSPI_CR);
+ mutex_destroy(&qspi->lock);
+ pm_runtime_put_noidle(qspi->dev);
+ pm_runtime_disable(qspi->dev);
+ pm_runtime_set_suspended(qspi->dev);
+ pm_runtime_dont_use_autosuspend(qspi->dev);
+err_dma_free:
+ stm32_qspi_dma_free(qspi);
+err_clk_disable:
+ clk_disable_unprepare(qspi->clk);
err_master_put:
spi_master_put(qspi->ctrl);
@@ -692,7 +689,16 @@ static int stm32_qspi_remove(struct platform_device *pdev)
{
struct stm32_qspi *qspi = platform_get_drvdata(pdev);
- stm32_qspi_release(qspi);
+ pm_runtime_get_sync(qspi->dev);
+ /* disable qspi */
+ writel_relaxed(0, qspi->io_base + QSPI_CR);
+ stm32_qspi_dma_free(qspi);
+ mutex_destroy(&qspi->lock);
+ pm_runtime_put_noidle(qspi->dev);
+ pm_runtime_disable(qspi->dev);
+ pm_runtime_set_suspended(qspi->dev);
+ pm_runtime_dont_use_autosuspend(qspi->dev);
+ clk_disable_unprepare(qspi->clk);
return 0;
}
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index d753df700e9e..59e07675ef86 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -609,15 +609,20 @@ err_find_dev:
static int spidev_release(struct inode *inode, struct file *filp)
{
struct spidev_data *spidev;
+ int dofree;
mutex_lock(&device_list_lock);
spidev = filp->private_data;
filp->private_data = NULL;
+ spin_lock_irq(&spidev->spi_lock);
+ /* ... after we unbound from the underlying device? */
+ dofree = (spidev->spi == NULL);
+ spin_unlock_irq(&spidev->spi_lock);
+
/* last close? */
spidev->users--;
if (!spidev->users) {
- int dofree;
kfree(spidev->tx_buffer);
spidev->tx_buffer = NULL;
@@ -625,19 +630,14 @@ static int spidev_release(struct inode *inode, struct file *filp)
kfree(spidev->rx_buffer);
spidev->rx_buffer = NULL;
- spin_lock_irq(&spidev->spi_lock);
- if (spidev->spi)
- spidev->speed_hz = spidev->spi->max_speed_hz;
-
- /* ... after we unbound from the underlying device? */
- dofree = (spidev->spi == NULL);
- spin_unlock_irq(&spidev->spi_lock);
-
if (dofree)
kfree(spidev);
+ else
+ spidev->speed_hz = spidev->spi->max_speed_hz;
}
#ifdef CONFIG_SPI_SLAVE
- spi_slave_abort(spidev->spi);
+ if (!dofree)
+ spi_slave_abort(spidev->spi);
#endif
mutex_unlock(&device_list_lock);
@@ -787,13 +787,13 @@ static int spidev_remove(struct spi_device *spi)
{
struct spidev_data *spidev = spi_get_drvdata(spi);
+ /* prevent new opens */
+ mutex_lock(&device_list_lock);
/* make sure ops on existing fds can abort cleanly */
spin_lock_irq(&spidev->spi_lock);
spidev->spi = NULL;
spin_unlock_irq(&spidev->spi_lock);
- /* prevent new opens */
- mutex_lock(&device_list_lock);
list_del(&spidev->device_entry);
device_destroy(spidev_class, spidev->devt);
clear_bit(MINOR(spidev->devt), minors);
diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h
index ee0f2460bff6..d56427c0b3e0 100644
--- a/include/uapi/linux/spi/spidev.h
+++ b/include/uapi/linux/spi/spidev.h
@@ -48,6 +48,10 @@
#define SPI_TX_QUAD 0x200
#define SPI_RX_DUAL 0x400
#define SPI_RX_QUAD 0x800
+#define SPI_CS_WORD 0x1000
+#define SPI_TX_OCTAL 0x2000
+#define SPI_RX_OCTAL 0x4000
+#define SPI_3WIRE_HIZ 0x8000
/*---------------------------------------------------------------------------*/
diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c
index eec23fa693bd..83844f8b862a 100644
--- a/tools/spi/spidev_test.c
+++ b/tools/spi/spidev_test.c
@@ -47,7 +47,7 @@ static int transfer_size;
static int iterations;
static int interval = 5; /* interval in seconds for showing transfer rate */
-uint8_t default_tx[] = {
+static uint8_t default_tx[] = {
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x40, 0x00, 0x00, 0x00, 0x00, 0x95,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
@@ -56,8 +56,8 @@ uint8_t default_tx[] = {
0xF0, 0x0D,
};
-uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, };
-char *input_tx;
+static uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, };
+static char *input_tx;
static void hex_dump(const void *src, size_t length, size_t line_size,
char *prefix)
@@ -461,8 +461,8 @@ int main(int argc, char *argv[])
pabort("can't get max speed hz");
printf("spi mode: 0x%x\n", mode);
- printf("bits per word: %d\n", bits);
- printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000);
+ printf("bits per word: %u\n", bits);
+ printf("max speed: %u Hz (%u kHz)\n", speed, speed/1000);
if (input_tx)
transfer_escaped_string(fd, input_tx);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 22:10:03 +0000