diff options
| author | Stephen Hemminger <shemminger@osdl.org> | 2006-01-06 16:57:41 -0800 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@pobox.com> | 2006-01-09 10:32:40 -0500 |
| commit | decf67aa2f4d498c02c2ad24a187a66c217f330c (patch) | |
| tree | 96ead26cfcaa2915d4c1300fb533a0b62172f7f7 /drivers | |
| parent | bce7c95e4dd4d5e924deb2929b639b4caca09c93 (diff) | |
[PATCH] sk98lin: error handling on dual port board
Sk98lin driver error recovery on two port boards is bad.
If it fails the second allocation, it will not release resources
properly. Also it registers the second port in the pci driver data
If second port fails, might as well go with one port.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/sk98lin/skge.c | 36 |
1 files changed, 21 insertions, 15 deletions
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 9a879530ef6d..87bfe4c24a77 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4899,15 +4899,17 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, boards_found++; + pci_set_drvdata(pdev, dev); + /* More then one port found */ if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - if ((dev = alloc_etherdev(sizeof(DEV_NET))) == 0) { - printk(KERN_ERR "Unable to allocate etherdev " + dev = alloc_etherdev(sizeof(DEV_NET)); + if (!dev) { + printk(KERN_ERR "sk98lin: unable to allocate etherdev " "structure!\n"); - goto out; + goto single_port; } - pAC->dev[1] = dev; pNet = netdev_priv(dev); pNet->PortNr = 1; pNet->NetNr = 1; @@ -4939,20 +4941,25 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, if (using_dac) dev->features |= NETIF_F_HIGHDMA; - if (register_netdev(dev)) { - printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n"); + error = register_netdev(dev); + if (error) { + printk(KERN_ERR "sk98lin: Could not register device" + " for second port. (%d)\n", error); free_netdev(dev); - pAC->dev[1] = pAC->dev[0]; - } else { - memcpy(&dev->dev_addr, - &pAC->Addr.Net[1].CurrentMacAddress, 6); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - - printk("%s: %s\n", dev->name, DeviceStr); - printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); + goto single_port; } + + pAC->dev[1] = dev; + memcpy(&dev->dev_addr, + &pAC->Addr.Net[1].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + printk("%s: %s\n", dev->name, DeviceStr); + printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); } +single_port: + /* Save the hardware revision */ pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) + (pAC->GIni.GIPciHwRev & 0x0F); @@ -4964,7 +4971,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA)); memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA)); - pci_set_drvdata(pdev, dev); return 0; out_free_resources: |