diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2020-07-20 21:28:09 +0800 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2020-07-20 16:31:54 +0100 |
| commit | 3acff11cef1dece31cd29956f19181895996a7c5 (patch) | |
| tree | 74c27d021b304ccab63c87dd1110bdf506cc0ebc /drivers/regulator/gpio-regulator.c | |
| parent | a98bcaa92d3d7a7753e23b3363d90ffdb82e8edb (diff) | |
regulator: gpio: Honor regulator-boot-on property
When requesting the enable GPIO, the driver should do so with the
correct output level matching some expected state. This is especially
important if the regulator is a critical one, such as a supply for
the boot CPU. This is currently done by checking for the enable-at-boot
property, but this is not documented in the device tree binding, nor
does it match the common regulator properties.
Honor the common regulator-boot-on property by checking the boot_on
constraint setting within the DT probe path. This is the same as what
is done in the fixed regulator driver.
Also add a comment stating that the enable-at-boot property should not
be used.
Fixes: 006694d099e8 ("regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200720132809.26908-1-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator/gpio-regulator.c')
| -rw-r--r-- | drivers/regulator/gpio-regulator.c | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 181451f922f1..5927d4f3eabd 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -148,6 +148,13 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np, config->supply_name = config->init_data->constraints.name; + if (config->init_data->constraints.boot_on) + config->enabled_at_boot = true; + + /* + * Do not use: undocumented device tree property. + * This is kept around solely for device tree ABI stability. + */ if (of_property_read_bool(np, "enable-at-boot")) config->enabled_at_boot = true; |