diff options
| author | Lay, Kuan Loon <kuan.loon.lay@intel.com> | 2021-10-13 14:59:41 +0800 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2021-10-14 19:10:47 -0700 |
| commit | 4dc08dcc9f6f58e881fd790d800e49abee8540e1 (patch) | |
| tree | f3d11c267ef0d5df5c8f1d448ebb90fa96502299 /drivers/net/phy | |
| parent | 4ece1ae440151a2e5af441d2c9b1d8eb3a700670 (diff) | |
net: phy: dp83867: introduce critical chip default init for non-of platform
PHY driver dp83867 has rich supports for OF-platform to fine-tune the PHY
chip during phy configuration. However, for non-OF platform, certain PHY
tunable parameters such as IO impedance and RX & TX internal delays are
critical and should be initialized to its default during PHY driver probe.
Tested-by: Clement <clement@intel.com>
Signed-off-by: Lay, Kuan Loon <kuan.loon.lay@intel.com>
Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211013065941.2124858-1-boon.leong.ong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 6bbc81ad295f..914619f3f0e3 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -619,6 +619,25 @@ static int dp83867_of_init(struct phy_device *phydev) #else static int dp83867_of_init(struct phy_device *phydev) { + struct dp83867_private *dp83867 = phydev->priv; + u16 delay; + + /* For non-OF device, the RX and TX ID values are either strapped + * or take from default value. So, we init RX & TX ID values here + * so that the RGMIIDCTL is configured correctly later in + * dp83867_config_init(); + */ + delay = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL); + dp83867->rx_id_delay = delay & DP83867_RGMII_RX_CLK_DELAY_MAX; + dp83867->tx_id_delay = (delay >> DP83867_RGMII_TX_CLK_DELAY_SHIFT) & + DP83867_RGMII_TX_CLK_DELAY_MAX; + + /* Per datasheet, IO impedance is default to 50-ohm, so we set the + * same here or else the default '0' means highest IO impedance + * which is wrong. + */ + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN / 2; + return 0; } #endif /* CONFIG_OF_MDIO */ |