Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...

1 files changed, 70 insertions, 23 deletions

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 8070fd664bfc..cacc725ca545 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -198,12 +198,12 @@ struct sdma_script_start_addrs {
 	s32 per_2_firi_addr;
 	s32 mcu_2_firi_addr;
 	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
+	s32 uart_2_mcu_ram_addr;
 	s32 per_2_app_addr;
 	s32 mcu_2_app_addr;
 	s32 per_2_per_addr;
 	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
+	s32 uartsh_2_mcu_ram_addr;
 	s32 per_2_shp_addr;
 	s32 mcu_2_shp_addr;
 	s32 ata_2_mcu_addr;
@@ -230,6 +230,10 @@ struct sdma_script_start_addrs {
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
 	s32 mcu_2_ecspi_addr;
+	s32 mcu_2_sai_addr;
+	s32 sai_2_mcu_addr;
+	s32 uart_2_mcu_addr;
+	s32 uartsh_2_mcu_addr;
 	/* End of v3 array */
 	s32 mcu_2_zqspi_addr;
 	/* End of v4 array */
@@ -433,9 +437,10 @@ struct sdma_channel {
 	unsigned long			watermark_level;
 	u32				shp_addr, per_addr;
 	enum dma_status			status;
-	bool				context_loaded;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
+	struct list_head                terminated;
+	bool				is_ram_script;
 };
 
 #define IMX_DMA_SG_LOOP		BIT(0)
@@ -476,6 +481,13 @@ struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it has been fixed in soc from i.mx6ul.
+	 * please get more information from the below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -499,6 +511,7 @@ struct sdma_engine {
 	struct sdma_buffer_descriptor	*bd0;
 	/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
 	bool				clk_ratio;
+	bool                            fw_loaded;
 };
 
 static int sdma_config_write(struct dma_chan *chan,
@@ -595,6 +608,13 @@ static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6q,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -628,6 +648,7 @@ static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -919,6 +940,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 	sdmac->pc_to_device = 0;
 	sdmac->device_to_device = 0;
 	sdmac->pc_to_pc = 0;
+	sdmac->is_ram_script = false;
 
 	switch (peripheral_type) {
 	case IMX_DMATYPE_MEMORY:
@@ -945,6 +967,17 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
 		break;
 	case IMX_DMATYPE_CSPI:
+		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+
+		/* Use rom script mcu_2_app if ERR009165 fixed */
+		if (sdmac->sdma->drvdata->ecspi_fixed) {
+			emi_2_per = sdma->script_addrs->mcu_2_app_addr;
+		} else {
+			emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+			sdmac->is_ram_script = true;
+		}
+
+		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
 	case IMX_DMATYPE_SAI:
@@ -954,6 +987,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 	case IMX_DMATYPE_SSI_DUAL:
 		per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
 		emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
+		sdmac->is_ram_script = true;
 		break;
 	case IMX_DMATYPE_SSI_SP:
 	case IMX_DMATYPE_MMC:
@@ -968,6 +1002,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		per_2_emi = sdma->script_addrs->asrc_2_mcu_addr;
 		emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
 		per_2_per = sdma->script_addrs->per_2_per_addr;
+		sdmac->is_ram_script = true;
 		break;
 	case IMX_DMATYPE_ASRC_SP:
 		per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
@@ -1008,9 +1043,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	int ret;
 	unsigned long flags;
 
-	if (sdmac->context_loaded)
-		return 0;
-
 	if (sdmac->direction == DMA_DEV_TO_MEM)
 		load_address = sdmac->pc_from_device;
 	else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1053,8 +1085,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-	sdmac->context_loaded = true;
-
 	return ret;
 }
 
@@ -1078,9 +1108,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 {
 	struct sdma_channel *sdmac = container_of(work, struct sdma_channel,
 						  terminate_worker);
-	unsigned long flags;
-	LIST_HEAD(head);
-
 	/*
 	 * According to NXP R&D team a delay of one BD SDMA cost time
 	 * (maximum is 1ms) should be added after disable of the channel
@@ -1089,11 +1116,7 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	 */
 	usleep_range(1000, 2000);
 
-	spin_lock_irqsave(&sdmac->vc.lock, flags);
-	vchan_get_all_descriptors(&sdmac->vc, &head);
-	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
-	vchan_dma_desc_free_list(&sdmac->vc, &head);
-	sdmac->context_loaded = false;
+	vchan_dma_desc_free_list(&sdmac->vc, &sdmac->terminated);
 }
 
 static int sdma_terminate_all(struct dma_chan *chan)
@@ -1107,6 +1130,13 @@ static int sdma_terminate_all(struct dma_chan *chan)
 
 	if (sdmac->desc) {
 		vchan_terminate_vdesc(&sdmac->desc->vd);
+		/*
+		 * move out current descriptor into terminated list so that
+		 * it could be free in sdma_channel_terminate_work alone
+		 * later without potential involving next descriptor raised
+		 * up before the last descriptor terminated.
+		 */
+		vchan_get_all_descriptors(&sdmac->vc, &sdmac->terminated);
 		sdmac->desc = NULL;
 		schedule_work(&sdmac->terminate_worker);
 	}
@@ -1168,7 +1198,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
-	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1208,9 +1237,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 		sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
 	}
 
-	ret = sdma_load_context(sdmac);
-
-	return ret;
+	return 0;
 }
 
 static int sdma_set_channel_priority(struct sdma_channel *sdmac,
@@ -1361,7 +1388,6 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdmac->event_id0 = 0;
 	sdmac->event_id1 = 0;
-	sdmac->context_loaded = false;
 
 	sdma_set_channel_priority(sdmac, 0);
 
@@ -1374,6 +1400,11 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
 {
 	struct sdma_desc *desc;
 
+	if (!sdmac->sdma->fw_loaded && sdmac->is_ram_script) {
+		dev_warn_once(sdmac->sdma->dev, "sdma firmware not ready!\n");
+		goto err_out;
+	}
+
 	desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
 	if (!desc)
 		goto err_out;
@@ -1722,8 +1753,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
 
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2	38
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	41
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	42
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	45
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	46
 
 static void sdma_add_scripts(struct sdma_engine *sdma,
 		const struct sdma_script_start_addrs *addr)
@@ -1747,6 +1778,19 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 	for (i = 0; i < sdma->script_number; i++)
 		if (addr_arr[i] > 0)
 			saddr_arr[i] = addr_arr[i];
+
+	/*
+	 * get uart_2_mcu_addr/uartsh_2_mcu_addr rom script specially because
+	 * they are now replaced by uart_2_mcu_ram_addr/uartsh_2_mcu_ram_addr
+	 * to be compatible with legacy freescale/nxp sdma firmware, and they
+	 * are located in the bottom part of sdma_script_start_addrs which are
+	 * beyond the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1.
+	 */
+	if (addr->uart_2_mcu_addr)
+		sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_addr;
+	if (addr->uartsh_2_mcu_addr)
+		sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_addr;
+
 }
 
 static void sdma_load_firmware(const struct firmware *fw, void *context)
@@ -1803,6 +1847,8 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
 
 	sdma_add_scripts(sdma, addr);
 
+	sdma->fw_loaded = true;
+
 	dev_info(sdma->dev, "loaded firmware %d.%d\n",
 			header->version_major,
 			header->version_minor);
@@ -2086,6 +2132,7 @@ static int sdma_probe(struct platform_device *pdev)
 
 		sdmac->channel = i;
 		sdmac->vc.desc_free = sdma_desc_free;
+		INIT_LIST_HEAD(&sdmac->terminated);
 		INIT_WORK(&sdmac->terminate_worker,
 				sdma_channel_terminate_work);
 		/*