powerpc: Remove use of CONFIG_PPC_MERGE

Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove
the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc
and include/asm-powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

4 files changed, 1 insertions, 305 deletions

diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h
index 53b283050ab3..d13fb68bb5c0 100644
--- a/arch/powerpc/include/asm/dcr.h
+++ b/arch/powerpc/include/asm/dcr.h
@@ -65,17 +65,13 @@ typedef dcr_host_mmio_t dcr_host_t;
 #endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
 
 /*
- * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
- * base from the device-tree
+ * additional helpers to read the DCR * base from the device-tree
  */
-#ifdef CONFIG_PPC_MERGE
 struct device_node;
 extern unsigned int dcr_resource_start(struct device_node *np,
 				       unsigned int index);
 extern unsigned int dcr_resource_len(struct device_node *np,
 				     unsigned int index);
-#endif /* CONFIG_PPC_MERGE */
-
 #endif /* CONFIG_PPC_DCR */
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h
index db1362f8c603..105ade297aad 100644
--- a/arch/powerpc/include/asm/i8259.h
+++ b/arch/powerpc/include/asm/i8259.h
@@ -4,14 +4,9 @@
 
 #include <linux/irq.h>
 
-#ifdef CONFIG_PPC_MERGE
 extern void i8259_init(struct device_node *node, unsigned long intack_addr);
 extern unsigned int i8259_irq(void);
 extern struct irq_host *i8259_get_host(void);
-#else
-extern void i8259_init(unsigned long intack_addr, int offset);
-extern int i8259_irq(void);
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_I8259_H */
diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h
index 4cf35531c0ef..fb59829983b8 100644
--- a/arch/powerpc/include/asm/ipic.h
+++ b/arch/powerpc/include/asm/ipic.h
@@ -77,15 +77,8 @@ extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
 extern u32 ipic_get_mcp_status(void);
 extern void ipic_clear_mcp_status(u32 mask);
 
-#ifdef CONFIG_PPC_MERGE
 extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
 extern unsigned int ipic_get_irq(void);
-#else
-extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
-		unsigned int irq_offset,
-		unsigned char *senses, unsigned int senses_count);
-extern int ipic_get_irq(void);
-#endif
 
 #endif /* __ASM_IPIC_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 1ef8e304e0ea..a372f76836c2 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -25,8 +25,6 @@
 
 extern atomic_t ppc_n_lost_interrupts;
 
-#ifdef CONFIG_PPC_MERGE
-
 /* This number is used when no interrupt has been assigned */
 #define NO_IRQ			(0)
 
@@ -326,292 +324,6 @@ static __inline__ int irq_canonicalize(int irq)
 	return irq;
 }
 
-
-#else /* CONFIG_PPC_MERGE */
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ			(-1)
-#define NO_IRQ_IGNORE		(-2)
-
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK		0x1
-#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
-#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK	0x2
-#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
-
-
-#if defined(CONFIG_40x)
-#include <asm/ibm4xx.h>
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#ifndef UIC_WIDTH /* Number of interrupts per device */
-#define UIC_WIDTH 32
-#endif
-
-#ifndef NR_UICS /* number  of UIC devices */
-#define NR_UICS 1
-#endif
-
-#if defined (CONFIG_403)
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#define	NR_AIC_IRQS 32
-#define	NR_IRQS	 (NR_AIC_IRQS + NR_BOARD_IRQS)
-
-#elif !defined (CONFIG_403)
-
-/*
- *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
- * possible interrupts as well. There are seven, configurable external
- * interrupt pins and there are 17 internal interrupts for the on-chip
- * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
- *
- */
-
-
-#define NR_UIC_IRQS UIC_WIDTH
-#define NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-#endif
-
-#elif defined(CONFIG_44x)
-#include <asm/ibm44x.h>
-
-#define	NR_UIC_IRQS	32
-#define	NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-
-#elif defined(CONFIG_8xx)
-
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc8xx.h>
-
-/* The MPC8xx cores have 16 possible interrupts.  There are eight
- * possible level sensitive interrupts assigned and generated internally
- * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
- * There are eight external interrupts (IRQs) that can be configured
- * as either level or edge sensitive.
- *
- * On some implementations, there is also the possibility of an 8259
- * through the PCI and PCI-ISA bridges.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * and 8259 interrupt controllers so that we can uniquely identify
- * any interrupt source with a single integer.
- */
-#define NR_SIU_INTS	16
-#define NR_CPM_INTS	32
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-
-#define SIU_IRQ_OFFSET		0
-#define CPM_IRQ_OFFSET		(SIU_IRQ_OFFSET + NR_SIU_INTS)
-#define I8259_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
-
-#define NR_IRQS	(NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* These values must be zero-based and map 1:1 with the SIU configuration.
- * They are used throughout the 8xx I/O subsystem to generate
- * interrupt masks, flags, and other control patterns.  This is why the
- * current kernel assumption of the 8259 as the base controller is such
- * a pain in the butt.
- */
-#define	SIU_IRQ0	(0)	/* Highest priority */
-#define	SIU_LEVEL0	(1)
-#define	SIU_IRQ1	(2)
-#define	SIU_LEVEL1	(3)
-#define	SIU_IRQ2	(4)
-#define	SIU_LEVEL2	(5)
-#define	SIU_IRQ3	(6)
-#define	SIU_LEVEL3	(7)
-#define	SIU_IRQ4	(8)
-#define	SIU_LEVEL4	(9)
-#define	SIU_IRQ5	(10)
-#define	SIU_LEVEL5	(11)
-#define	SIU_IRQ6	(12)
-#define	SIU_LEVEL6	(13)
-#define	SIU_IRQ7	(14)
-#define	SIU_LEVEL7	(15)
-
-#define MPC8xx_INT_FEC1		SIU_LEVEL1
-#define MPC8xx_INT_FEC2		SIU_LEVEL3
-
-#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
-
-/* The internal interrupts we can configure as we see fit.
- * My personal preference is CPM at level 2, which puts it above the
- * MBX PCI/ISA/IDE interrupts.
- */
-#ifndef PIT_INTERRUPT
-#define PIT_INTERRUPT		SIU_LEVEL0
-#endif
-#ifndef	CPM_INTERRUPT
-#define CPM_INTERRUPT		SIU_LEVEL2
-#endif
-#ifndef	PCMCIA_INTERRUPT
-#define PCMCIA_INTERRUPT	SIU_LEVEL6
-#endif
-#ifndef	DEC_INTERRUPT
-#define DEC_INTERRUPT		SIU_LEVEL7
-#endif
-
-/* Some internal interrupt registers use an 8-bit mask for the interrupt
- * level instead of a number.
- */
-#define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
-
-#else /* CONFIG_40x + CONFIG_8xx */
-/*
- * this is the # irq's for all ppc arch's (pmac/chrp/prep)
- * so it is the max of them all
- */
-#define NR_IRQS			256
-#define __DO_IRQ_CANON	1
-
-#ifndef CONFIG_8260
-
-#define NUM_8259_INTERRUPTS	16
-
-#else /* CONFIG_8260 */
-
-/* The 8260 has an internal interrupt controller with a maximum of
- * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
- * Don't be confused by the 8260 documentation where they list an
- * "interrupt number" and "interrupt vector".  We are only interested
- * in the interrupt vector.  There are "reserved" holes where the
- * vector number increases, but the interrupt number in the table does not.
- * (Document errata updates have fixed this...make sure you have up to
- * date processor documentation -- Dan).
- */
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET	0
-#endif
-
-#define NR_CPM_INTS	64
-
-#define	SIU_INT_ERROR		((uint)0x00 + CPM_IRQ_OFFSET)
-#define	SIU_INT_I2C		((uint)0x01 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SPI		((uint)0x02 + CPM_IRQ_OFFSET)
-#define	SIU_INT_RISC		((uint)0x03 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC1		((uint)0x04 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC2		((uint)0x05 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA1		((uint)0x06 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA2		((uint)0x07 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA3		((uint)0x08 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA4		((uint)0x09 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SDMA		((uint)0x0a + CPM_IRQ_OFFSET)
-#define	SIU_INT_USB		((uint)0x0b + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER1		((uint)0x0c + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER2		((uint)0x0d + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER3		((uint)0x0e + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER4		((uint)0x0f + CPM_IRQ_OFFSET)
-#define	SIU_INT_TMCNT		((uint)0x10 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PIT		((uint)0x11 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PCI		((uint)0x12 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ1		((uint)0x13 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ2		((uint)0x14 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ3		((uint)0x15 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ4		((uint)0x16 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ5		((uint)0x17 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ6		((uint)0x18 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ7		((uint)0x19 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC1		((uint)0x20 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC2		((uint)0x21 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC3		((uint)0x22 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC1		((uint)0x24 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC2		((uint)0x25 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC1		((uint)0x28 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC2		((uint)0x29 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC3		((uint)0x2a + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC4		((uint)0x2b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC15		((uint)0x30 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC14		((uint)0x31 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC13		((uint)0x32 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC12		((uint)0x33 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC11		((uint)0x34 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC10		((uint)0x35 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC9		((uint)0x36 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC8		((uint)0x37 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC7		((uint)0x38 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC6		((uint)0x39 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC5		((uint)0x3a + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC4		((uint)0x3b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC3		((uint)0x3c + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC2		((uint)0x3d + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC1		((uint)0x3e + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC0		((uint)0x3f + CPM_IRQ_OFFSET)
-
-#endif /* CONFIG_8260 */
-
-#endif /* Whatever way too big #ifdef */
-
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-/* pedantic: these are long because they are used with set_bit --RR */
-extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/*
- * Because many systems have two overlapping names spaces for
- * interrupts (ISA and XICS for example), and the ISA interrupts
- * have historically not been easy to renumber, we allow ISA
- * interrupts to take values 0 - 15, and shift up the remaining
- * interrupts by 0x10.
- */
-#define NUM_ISA_INTERRUPTS	0x10
-extern int __irq_offset_value;
-
-static inline int irq_offset_up(int irq)
-{
-	return(irq + __irq_offset_value);
-}
-
-static inline int irq_offset_down(int irq)
-{
-	return(irq - __irq_offset_value);
-}
-
-static inline int irq_offset_value(void)
-{
-	return __irq_offset_value;
-}
-
-#ifdef __DO_IRQ_CANON
-extern int ppc_do_canonicalize_irqs;
-#else
-#define ppc_do_canonicalize_irqs	0
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	if (ppc_do_canonicalize_irqs && irq == 2)
-		irq = 9;
-	return irq;
-}
-#endif /* CONFIG_PPC_MERGE */
-
 extern int distribute_irqs;
 
 struct irqaction;