diff options
author | Russell King <rmk@dyn-67.arm.linux.org.uk> | 2008-08-05 16:14:15 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2008-08-07 09:55:48 +0100 |
commit | a09e64fbc0094e3073dbb09c3b4bfe4ab669244b (patch) | |
tree | 69689f467179891b498bd7423fcf61925173db31 /arch/arm/mach-footbridge/include/mach/hardware.h | |
parent | a1b81a84fff05dbfef45b7012c26e1fee9973e5d (diff) |
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-footbridge/include/mach/hardware.h')
-rw-r--r-- | arch/arm/mach-footbridge/include/mach/hardware.h | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h new file mode 100644 index 000000000000..ffaea90486f9 --- /dev/null +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -0,0 +1,105 @@ +/* + * arch/arm/mach-footbridge/include/mach/hardware.h + * + * Copyright (C) 1998-1999 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains the hardware definitions of the EBSA-285. + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <mach/memory.h> + +/* Virtual Physical Size + * 0xff800000 0x40000000 1MB X-Bus + * 0xff000000 0x7c000000 1MB PCI I/O space + * 0xfe000000 0x42000000 1MB CSR + * 0xfd000000 0x78000000 1MB Outbound write flush (not supported) + * 0xfc000000 0x79000000 1MB PCI IACK/special space + * 0xfb000000 0x7a000000 16MB PCI Config type 1 + * 0xfa000000 0x7b000000 16MB PCI Config type 0 + * 0xf9000000 0x50000000 1MB Cache flush + * 0xf0000000 0x80000000 16MB ISA memory + */ +#define XBUS_SIZE 0x00100000 +#define XBUS_BASE 0xff800000 + +#define PCIO_SIZE 0x00100000 +#define PCIO_BASE 0xff000000 + +#define ARMCSR_SIZE 0x00100000 +#define ARMCSR_BASE 0xfe000000 + +#define WFLUSH_SIZE 0x00100000 +#define WFLUSH_BASE 0xfd000000 + +#define PCIIACK_SIZE 0x00100000 +#define PCIIACK_BASE 0xfc000000 + +#define PCICFG1_SIZE 0x01000000 +#define PCICFG1_BASE 0xfb000000 + +#define PCICFG0_SIZE 0x01000000 +#define PCICFG0_BASE 0xfa000000 + +#define PCIMEM_SIZE 0x01000000 +#define PCIMEM_BASE 0xf0000000 + +#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000)) +#define XBUS_LED_AMBER (1 << 0) +#define XBUS_LED_GREEN (1 << 1) +#define XBUS_LED_RED (1 << 2) +#define XBUS_LED_TOGGLE (1 << 8) + +#define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000)) +#define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15) +#define XBUS_SWITCH_J17_13 ((*XBUS_SWITCH) & (1 << 4)) +#define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5)) +#define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6)) + +#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108) + + +/* PIC irq control */ +#define PIC_LO 0x20 +#define PIC_MASK_LO 0x21 +#define PIC_HI 0xA0 +#define PIC_MASK_HI 0xA1 + +/* GPIO pins */ +#define GPIO_CCLK 0x800 +#define GPIO_DSCLK 0x400 +#define GPIO_E2CLK 0x200 +#define GPIO_IOLOAD 0x100 +#define GPIO_RED_LED 0x080 +#define GPIO_WDTIMER 0x040 +#define GPIO_DATA 0x020 +#define GPIO_IOCLK 0x010 +#define GPIO_DONE 0x008 +#define GPIO_FAN 0x004 +#define GPIO_GREEN_LED 0x002 +#define GPIO_RESET 0x001 + +/* CPLD pins */ +#define CPLD_DS_ENABLE 8 +#define CPLD_7111_DISABLE 4 +#define CPLD_UNMUTE 2 +#define CPLD_FLASH_WR_ENABLE 1 + +#ifndef __ASSEMBLY__ +extern void gpio_modify_op(int mask, int set); +extern void gpio_modify_io(int mask, int in); +extern int gpio_read(void); +extern void cpld_modify(int mask, int set); +#endif + +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x81000000 + +#endif |