Merge tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "There's some device specific fixes here but also an unusually large
  number of fixes for the core, including both fixes for breakage
  introduced on ACPI systems while fixing the long standing confusion
  about the polarity of GPIO chip selects specified through DT, and
  fixes for ordering issues on unregistration which have been exposed
  through the wider usage of devm_."

* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sc18is602: implement .max_{transfer,message}_size() for the controller
  spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
  MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
  dt-bindings: spi: spi-mux: rename flash node
  spi: Don't have controller clean up spi device before driver unbind
  spi: Assume GPIO CS active high in ACPI case
  spi: sprd: Add missing MODULE_DEVICE_TABLE
  spi: Switch to signed types for *_native_cs SPI controller fields
  spi: take the SPI IO-mutex in the spi_set_cs_timing method
  spi: spi-fsl-dspi: Fix a resource leak in an error handling path
  spi: spi-zynq-qspi: Fix stack violation bug
  spi: spi-zynq-qspi: Fix kernel-doc warning
  spi: altera: Make SPI_ALTERA_CORE invisible
  spi: Fix spi device unregister flow

9 files changed, 64 insertions, 24 deletions

diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index d09c6355e22d..51c7622dc20b 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -72,7 +72,7 @@ examples:
 
             mux-controls = <&mux>;
 
-            spi-flash@0 {
+            flash@0 {
                 compatible = "jedec,spi-nor";
                 reg = <0>;
                 spi-max-frequency = <40000000>;
diff --git a/MAINTAINERS b/MAINTAINERS
index 81e1edeceae4..04babfa8fc76 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17304,6 +17304,12 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stm32*
 
+ST STM32 SPI DRIVER
+M:	Alain Volmat <alain.volmat@foss.st.com>
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	drivers/spi/spi-stm32.c
+
 ST STPDDC60 DRIVER
 M:	Daniel Nilsson <daniel.nilsson@flex.com>
 L:	linux-hwmon@vger.kernel.org
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8b161ec4943b..f4481fe48bf0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -65,7 +65,7 @@ config SPI_ALTERA
 	  This is the driver for the Altera SPI Controller.
 
 config SPI_ALTERA_CORE
-	tristate "Altera SPI Controller core code"
+	tristate "Altera SPI Controller core code" if COMPILE_TEST
 	select REGMAP
 	help
 	  "The core code for the Altera SPI Controller"
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 028736687488..fb45e6af6638 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1375,11 +1375,13 @@ poll_mode:
 	ret = spi_register_controller(ctlr);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
-		goto out_free_irq;
+		goto out_release_dma;
 	}
 
 	return ret;
 
+out_release_dma:
+	dspi_release_dma(dspi);
 out_free_irq:
 	if (dspi->irq)
 		free_irq(dspi->irq, dspi);
diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index 297c512069a5..5d27ee482237 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -174,7 +174,7 @@ static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode)
 static int sc18is602_check_transfer(struct spi_device *spi,
 				    struct spi_transfer *t, int tlen)
 {
-	if (t && t->len + tlen > SC18IS602_BUFSIZ)
+	if (t && t->len + tlen > SC18IS602_BUFSIZ + 1)
 		return -EINVAL;
 
 	return 0;
@@ -219,6 +219,11 @@ static int sc18is602_transfer_one(struct spi_master *master,
 	return status;
 }
 
+static size_t sc18is602_max_transfer_size(struct spi_device *spi)
+{
+	return SC18IS602_BUFSIZ;
+}
+
 static int sc18is602_setup(struct spi_device *spi)
 {
 	struct sc18is602 *hw = spi_master_get_devdata(spi->master);
@@ -293,6 +298,8 @@ static int sc18is602_probe(struct i2c_client *client,
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->setup = sc18is602_setup;
 	master->transfer_one_message = sc18is602_transfer_one;
+	master->max_transfer_size = sc18is602_max_transfer_size;
+	master->max_message_size = sc18is602_max_transfer_size;
 	master->dev.of_node = np;
 	master->min_speed_hz = hw->freq / 128;
 	master->max_speed_hz = hw->freq / 4;
diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c
index b41a75749b49..28e70db9bbba 100644
--- a/drivers/spi/spi-sprd.c
+++ b/drivers/spi/spi-sprd.c
@@ -1068,6 +1068,7 @@ static const struct of_device_id sprd_spi_of_match[] = {
 	{ .compatible = "sprd,sc9860-spi", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, sprd_spi_of_match);
 
 static struct platform_driver sprd_spi_driver = {
 	.driver = {
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 5d8a5ee62fa2..5a3d81c31d04 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -367,7 +367,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
 }
 
 /**
- * zynq_qspi_setup - Configure the QSPI controller
+ * zynq_qspi_setup_op - Configure the QSPI controller
  * @spi:	Pointer to the spi_device structure
  *
  * Sets the operational mode of QSPI controller for the next QSPI transfer, baud
@@ -528,18 +528,17 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 	struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
 	int err = 0, i;
 	u8 *tmpbuf;
-	u8 opcode = op->cmd.opcode;
 
 	dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
-		opcode, op->cmd.buswidth, op->addr.buswidth,
+		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
 		op->dummy.buswidth, op->data.buswidth);
 
 	zynq_qspi_chipselect(mem->spi, true);
 	zynq_qspi_config_op(xqspi, mem->spi);
 
-	if (op->cmd.nbytes) {
+	if (op->cmd.opcode) {
 		reinit_completion(&xqspi->data_completion);
-		xqspi->txbuf = &opcode;
+		xqspi->txbuf = (u8 *)&op->cmd.opcode;
 		xqspi->rxbuf = NULL;
 		xqspi->tx_bytes = op->cmd.nbytes;
 		xqspi->rx_bytes = op->cmd.nbytes;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ba425b9c7700..e353b7a9e54e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -47,10 +47,6 @@ static void spidev_release(struct device *dev)
 {
 	struct spi_device	*spi = to_spi_device(dev);
 
-	/* spi controllers may cleanup for released devices */
-	if (spi->controller->cleanup)
-		spi->controller->cleanup(spi);
-
 	spi_controller_put(spi->controller);
 	kfree(spi->driver_override);
 	kfree(spi);
@@ -558,6 +554,12 @@ static int spi_dev_check(struct device *dev, void *data)
 	return 0;
 }
 
+static void spi_cleanup(struct spi_device *spi)
+{
+	if (spi->controller->cleanup)
+		spi->controller->cleanup(spi);
+}
+
 /**
  * spi_add_device - Add spi_device allocated with spi_alloc_device
  * @spi: spi_device to register
@@ -622,11 +624,13 @@ int spi_add_device(struct spi_device *spi)
 
 	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
-	if (status < 0)
+	if (status < 0) {
 		dev_err(dev, "can't add %s, status %d\n",
 				dev_name(&spi->dev), status);
-	else
+		spi_cleanup(spi);
+	} else {
 		dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
+	}
 
 done:
 	mutex_unlock(&spi_add_lock);
@@ -717,7 +721,9 @@ void spi_unregister_device(struct spi_device *spi)
 	if (ACPI_COMPANION(&spi->dev))
 		acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
 	device_remove_software_node(&spi->dev);
-	device_unregister(&spi->dev);
+	device_del(&spi->dev);
+	spi_cleanup(spi);
+	put_device(&spi->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_device);
 
@@ -814,15 +820,29 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 
 	if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio)) {
 		if (!(spi->mode & SPI_NO_CS)) {
-			if (spi->cs_gpiod)
-				/* polarity handled by gpiolib */
-				gpiod_set_value_cansleep(spi->cs_gpiod, activate);
-			else
+			if (spi->cs_gpiod) {
+				/*
+				 * Historically ACPI has no means of the GPIO polarity and
+				 * thus the SPISerialBus() resource defines it on the per-chip
+				 * basis. In order to avoid a chain of negations, the GPIO
+				 * polarity is considered being Active High. Even for the cases
+				 * when _DSD() is involved (in the updated versions of ACPI)
+				 * the GPIO CS polarity must be defined Active High to avoid
+				 * ambiguity. That's why we use enable, that takes SPI_CS_HIGH
+				 * into account.
+				 */
+				if (has_acpi_companion(&spi->dev))
+					gpiod_set_value_cansleep(spi->cs_gpiod, !enable);
+				else
+					/* Polarity handled by GPIO library */
+					gpiod_set_value_cansleep(spi->cs_gpiod, activate);
+			} else {
 				/*
 				 * invert the enable line, as active low is
 				 * default for SPI.
 				 */
 				gpio_set_value_cansleep(spi->cs_gpio, !enable);
+			}
 		}
 		/* Some SPI masters need both GPIO CS & slave_select */
 		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
@@ -3451,9 +3471,12 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup,
 
 	if (spi->controller->set_cs_timing &&
 	    !(spi->cs_gpiod || gpio_is_valid(spi->cs_gpio))) {
+		mutex_lock(&spi->controller->io_mutex);
+
 		if (spi->controller->auto_runtime_pm) {
 			status = pm_runtime_get_sync(parent);
 			if (status < 0) {
+				mutex_unlock(&spi->controller->io_mutex);
 				pm_runtime_put_noidle(parent);
 				dev_err(&spi->controller->dev, "Failed to power device: %d\n",
 					status);
@@ -3464,11 +3487,13 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup,
 								hold, inactive);
 			pm_runtime_mark_last_busy(parent);
 			pm_runtime_put_autosuspend(parent);
-			return status;
 		} else {
-			return spi->controller->set_cs_timing(spi, setup, hold,
+			status = spi->controller->set_cs_timing(spi, setup, hold,
 							      inactive);
 		}
+
+		mutex_unlock(&spi->controller->io_mutex);
+		return status;
 	}
 
 	if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) ||
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 360a3bc767ca..74239d65c7fd 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -644,8 +644,8 @@ struct spi_controller {
 	int			*cs_gpios;
 	struct gpio_desc	**cs_gpiods;
 	bool			use_gpio_descriptors;
-	u8			unused_native_cs;
-	u8			max_native_cs;
+	s8			unused_native_cs;
+	s8			max_native_cs;
 
 	/* statistics */
 	struct spi_statistics	statistics;