diff options
| author | Harry Morris <harrymorris12@gmail.com> | 2017-03-28 13:08:58 +0100 |
|---|---|---|
| committer | Marcel Holtmann <marcel@holtmann.org> | 2017-04-12 22:02:38 +0200 |
| commit | ded845a781a578dfb0b5b2c138e5a067aa3b1242 (patch) | |
| tree | c58265a5f3b7a5a7cc08cf5f387c220e31bf912f | |
| parent | 212d71833315c65644efc46223db61dee7b3c68e (diff) | |
ieee802154: Add CA8210 IEEE 802.15.4 device driver
Add driver source and config for softMAC implementation of Cascoda's CA8210
IEEE 802.15.4 transceiver device. The driver mimics a common PHY-only
implementation despite the CA8210 being a hardMAC device which exposes a SAP
interface to the fully integrated MAC.
The chip is a modem-only device with an integrated processor which runs the
802.15.4 MAC. The chip communicates via full-duplex SPI with additional pins
for NIRQ and NRESET. The chip can also output its 16MHz clock to a GPIO with a
configurable divider.
The driver can be configured to implement a debugfs node that provides access
to the SAP-based API to drive mechanisms not currently supported by the
standard kernel interface.
Signed-off-by: Harry Morris <h.morris@cascoda.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| -rw-r--r-- | drivers/net/ieee802154/Kconfig | 22 | ||||
| -rw-r--r-- | drivers/net/ieee802154/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ieee802154/ca8210.c | 3240 |
3 files changed, 3263 insertions, 0 deletions
diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig index 3057a8df4ce9..ce4864dc3c6e 100644 --- a/drivers/net/ieee802154/Kconfig +++ b/drivers/net/ieee802154/Kconfig @@ -82,3 +82,25 @@ config IEEE802154_ADF7242 This driver can also be built as a module. To do so, say M here. the module will be called 'adf7242'. + +config IEEE802154_CA8210 + tristate "Cascoda CA8210 transceiver driver" + depends on IEEE802154_DRIVERS && MAC802154 + depends on SPI + select COMMON_CLK + ---help--- + Say Y here to enable the CA8210 SPI 802.15.4 wireless + controller. + + This driver can also be built as a module. To do so, say M here. + the module will be called 'ca8210'. + +config IEEE802154_CA8210_DEBUGFS + bool "CA8210 debugfs interface" + depends on IEEE802154_CA8210 + depends on DEBUG_FS + ---help--- + This option compiles debugfs code for the ca8210 driver. This + exposes a debugfs node for each CA8210 instance which allows + direct use of the Cascoda API, exposing the 802.15.4 MAC + management entities. diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile index 3a923d339497..8374bb44a145 100644 --- a/drivers/net/ieee802154/Makefile +++ b/drivers/net/ieee802154/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o obj-$(CONFIG_IEEE802154_ADF7242) += adf7242.o +obj-$(CONFIG_IEEE802154_CA8210) += ca8210.o diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c new file mode 100644 index 000000000000..53fa87bfede0 --- /dev/null +++ b/drivers/net/ieee802154/ca8210.c @@ -0,0 +1,3240 @@ +/* + * http://www.cascoda.com/products/ca-821x/ + * Copyright (c) 2016, Cascoda, Ltd. + * All rights reserved. + * + * This code is dual-licensed under both GPLv2 and 3-clause BSD. What follows is + * the license notice for both respectively. + * + ******************************************************************************* + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + ******************************************************************************* + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its contributors + * may be used to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/cdev.h> +#include <linux/clk-provider.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/ieee802154.h> +#include <linux/kfifo.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/poll.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/workqueue.h> + +#include <net/ieee802154_netdev.h> +#include <net/mac802154.h> + +#define DRIVER_NAME "ca8210" + +/* external clock frequencies */ +#define ONE_MHZ 1000000 +#define TWO_MHZ (2 * ONE_MHZ) +#define FOUR_MHZ (4 * ONE_MHZ) +#define EIGHT_MHZ (8 * ONE_MHZ) +#define SIXTEEN_MHZ (16 * ONE_MHZ) + +/* spi constants */ +#define CA8210_SPI_BUF_SIZE 256 +#define CA8210_SYNC_TIMEOUT 1000 /* Timeout for synchronous commands [ms] */ + +/* test interface constants */ +#define CA8210_TEST_INT_FILE_NAME "ca8210_test" +#define CA8210_TEST_INT_FIFO_SIZE 256 + +/* MAC status enumerations */ +#define MAC_SUCCESS (0x00) +#define MAC_ERROR (0x01) +#define MAC_CANCELLED (0x02) +#define MAC_READY_FOR_POLL (0x03) +#define MAC_COUNTER_ERROR (0xDB) +#define MAC_IMPROPER_KEY_TYPE (0xDC) +#define MAC_IMPROPER_SECURITY_LEVEL (0xDD) +#define MAC_UNSUPPORTED_LEGACY (0xDE) +#define MAC_UNSUPPORTED_SECURITY (0xDF) +#define MAC_BEACON_LOST (0xE0) +#define MAC_CHANNEL_ACCESS_FAILURE (0xE1) +#define MAC_DENIED (0xE2) +#define MAC_DISABLE_TRX_FAILURE (0xE3) +#define MAC_SECURITY_ERROR (0xE4) +#define MAC_FRAME_TOO_LONG (0xE5) +#define MAC_INVALID_GTS (0xE6) +#define MAC_INVALID_HANDLE (0xE7) +#define MAC_INVALID_PARAMETER (0xE8) +#define MAC_NO_ACK (0xE9) +#define MAC_NO_BEACON (0xEA) +#define MAC_NO_DATA (0xEB) +#define MAC_NO_SHORT_ADDRESS (0xEC) +#define MAC_OUT_OF_CAP (0xED) +#define MAC_PAN_ID_CONFLICT (0xEE) +#define MAC_REALIGNMENT (0xEF) +#define MAC_TRANSACTION_EXPIRED (0xF0) +#define MAC_TRANSACTION_OVERFLOW (0xF1) +#define MAC_TX_ACTIVE (0xF2) +#define MAC_UNAVAILABLE_KEY (0xF3) +#define MAC_UNSUPPORTED_ATTRIBUTE (0xF4) +#define MAC_INVALID_ADDRESS (0xF5) +#define MAC_ON_TIME_TOO_LONG (0xF6) +#define MAC_PAST_TIME (0xF7) +#define MAC_TRACKING_OFF (0xF8) +#define MAC_INVALID_INDEX (0xF9) +#define MAC_LIMIT_REACHED (0xFA) +#define MAC_READ_ONLY (0xFB) +#define MAC_SCAN_IN_PROGRESS (0xFC) +#define MAC_SUPERFRAME_OVERLAP (0xFD) +#define MAC_SYSTEM_ERROR (0xFF) + +/* HWME attribute IDs */ +#define HWME_EDTHRESHOLD (0x04) +#define HWME_EDVALUE (0x06) +#define HWME_SYSCLKOUT (0x0F) +#define HWME_LQILIMIT (0x11) + +/* TDME attribute IDs */ +#define TDME_CHANNEL (0x00) +#define TDME_ATM_CONFIG (0x06) + +#define MAX_HWME_ATTRIBUTE_SIZE 16 +#define MAX_TDME_ATTRIBUTE_SIZE 2 + +/* PHY/MAC PIB Attribute Enumerations */ +#define PHY_CURRENT_CHANNEL (0x00) +#define PHY_TRANSMIT_POWER (0x02) +#define PHY_CCA_MODE (0x03) +#define MAC_ASSOCIATION_PERMIT (0x41) +#define MAC_AUTO_REQUEST (0x42) +#define MAC_BATT_LIFE_EXT (0x43) +#define MAC_BATT_LIFE_EXT_PERIODS (0x44) +#define MAC_BEACON_PAYLOAD (0x45) +#define MAC_BEACON_PAYLOAD_LENGTH (0x46) +#define MAC_BEACON_ORDER (0x47) +#define MAC_GTS_PERMIT (0x4d) +#define MAC_MAX_CSMA_BACKOFFS (0x4e) +#define MAC_MIN_BE (0x4f) +#define MAC_PAN_ID (0x50) +#define MAC_PROMISCUOUS_MODE (0x51) +#define MAC_RX_ON_WHEN_IDLE (0x52) +#define MAC_SHORT_ADDRESS (0x53) +#define MAC_SUPERFRAME_ORDER (0x54) +#define MAC_ASSOCIATED_PAN_COORD (0x56) +#define MAC_MAX_BE (0x57) +#define MAC_MAX_FRAME_RETRIES (0x59) +#define MAC_RESPONSE_WAIT_TIME (0x5A) +#define MAC_SECURITY_ENABLED (0x5D) + +#define MAC_AUTO_REQUEST_SECURITY_LEVEL (0x78) +#define MAC_AUTO_REQUEST_KEY_ID_MODE (0x79) + +#define NS_IEEE_ADDRESS (0xFF) /* Non-standard IEEE address */ + +/* MAC Address Mode Definitions */ +#define MAC_MODE_NO_ADDR (0x00) +#define MAC_MODE_SHORT_ADDR (0x02) +#define MAC_MODE_LONG_ADDR (0x03) + +/* MAC constants */ +#define MAX_BEACON_OVERHEAD (75) +#define MAX_BEACON_PAYLOAD_LENGTH (IEEE802154_MTU - MAX_BEACON_OVERHEAD) + +#define MAX_ATTRIBUTE_SIZE (122) +#define MAX_DATA_SIZE (114) + +#define CA8210_VALID_CHANNELS (0x07FFF800) + +/* MAC workarounds for V1.1 and MPW silicon (V0.x) */ +#define CA8210_MAC_WORKAROUNDS (0) +#define CA8210_MAC_MPW (0) + +/* memory manipulation macros */ +#define LS_BYTE(x) ((u8)((x) & 0xFF)) +#define MS_BYTE(x) ((u8)(((x) >> 8) & 0xFF)) + +/* message ID codes in SPI commands */ +/* downstream */ +#define MCPS_DATA_REQUEST (0x00) +#define MLME_ASSOCIATE_REQUEST (0x02) +#define MLME_ASSOCIATE_RESPONSE (0x03) +#define MLME_DISASSOCIATE_REQUEST (0x04) +#define MLME_GET_REQUEST (0x05) +#define MLME_ORPHAN_RESPONSE (0x06) +#define MLME_RESET_REQUEST (0x07) +#define MLME_RX_ENABLE_REQUEST (0x08) +#define MLME_SCAN_REQUEST (0x09) +#define MLME_SET_REQUEST (0x0A) +#define MLME_START_REQUEST (0x0B) +#define MLME_POLL_REQUEST (0x0D) +#define HWME_SET_REQUEST (0x0E) +#define HWME_GET_REQUEST (0x0F) +#define TDME_SETSFR_REQUEST (0x11) +#define TDME_GETSFR_REQUEST (0x12) +#define TDME_SET_REQUEST (0x14) +/* upstream */ +#define MCPS_DATA_INDICATION (0x00) +#define MCPS_DATA_CONFIRM (0x01) +#define MLME_RESET_CONFIRM (0x0A) +#define MLME_SET_CONFIRM (0x0E) +#define MLME_START_CONFIRM (0x0F) +#define HWME_SET_CONFIRM (0x12) +#define HWME_GET_CONFIRM (0x13) +#define HWME_WAKEUP_INDICATION (0x15) +#define TDME_SETSFR_CONFIRM (0x17) + +/* SPI command IDs */ +/* bit indicating a confirm or indication from slave to master */ +#define SPI_S2M (0x20) +/* bit indicating a synchronous message */ +#define SPI_SYN (0x40) + +/* SPI command definitions */ +#define SPI_IDLE (0xFF) +#define SPI_NACK (0xF0) + +#define SPI_MCPS_DATA_REQUEST (MCPS_DATA_REQUEST) +#define SPI_MCPS_DATA_INDICATION (MCPS_DATA_INDICATION + SPI_S2M) +#define SPI_MCPS_DATA_CONFIRM (MCPS_DATA_CONFIRM + SPI_S2M) + +#define SPI_MLME_ASSOCIATE_REQUEST (MLME_ASSOCIATE_REQUEST) +#define SPI_MLME_RESET_REQUEST (MLME_RESET_REQUEST + SPI_SYN) +#define SPI_MLME_SET_REQUEST (MLME_SET_REQUEST + SPI_SYN) +#define SPI_MLME_START_REQUEST (MLME_START_REQUEST + SPI_SYN) +#define SPI_MLME_RESET_CONFIRM (MLME_RESET_CONFIRM + SPI_S2M + SPI_SYN) +#define SPI_MLME_SET_CONFIRM (MLME_SET_CONFIRM + SPI_S2M + SPI_SYN) +#define SPI_MLME_START_CONFIRM (MLME_START_CONFIRM + SPI_S2M + SPI_SYN) + +#define SPI_HWME_SET_REQUEST (HWME_SET_REQUEST + SPI_SYN) +#define SPI_HWME_GET_REQUEST (HWME_GET_REQUEST + SPI_SYN) +#define SPI_HWME_SET_CONFIRM (HWME_SET_CONFIRM + SPI_S2M + SPI_SYN) +#define SPI_HWME_GET_CONFIRM (HWME_GET_CONFIRM + SPI_S2M + SPI_SYN) +#define SPI_HWME_WAKEUP_INDICATION (HWME_WAKEUP_INDICATION + SPI_S2M) + +#define SPI_TDME_SETSFR_REQUEST (TDME_SETSFR_REQUEST + SPI_SYN) +#define SPI_TDME_SET_REQUEST (TDME_SET_REQUEST + SPI_SYN) +#define SPI_TDME_SETSFR_CONFIRM (TDME_SETSFR_CONFIRM + SPI_S2M + SPI_SYN) + +/* TDME SFR addresses */ +/* Page 0 */ +#define CA8210_SFR_PACFG (0xB1) +#define CA8210_SFR_MACCON (0xD8) +#define CA8210_SFR_PACFGIB (0xFE) +/* Page 1 */ +#define CA8210_SFR_LOTXCAL (0xBF) +#define CA8210_SFR_PTHRH (0xD1) +#define CA8210_SFR_PRECFG (0xD3) +#define CA8210_SFR_LNAGX40 (0xE1) +#define CA8210_SFR_LNAGX41 (0xE2) +#define CA8210_SFR_LNAGX42 (0xE3) +#define CA8210_SFR_LNAGX43 (0xE4) +#define CA8210_SFR_LNAGX44 (0xE5) +#define CA8210_SFR_LNAGX45 (0xE6) +#define CA8210_SFR_LNAGX46 (0xE7) +#define CA8210_SFR_LNAGX47 (0xE9) + +#define PACFGIB_DEFAULT_CURRENT (0x3F) +#define PTHRH_DEFAULT_THRESHOLD (0x5A) +#define LNAGX40_DEFAULT_GAIN (0x29) /* 10dB */ +#define LNAGX41_DEFAULT_GAIN (0x54) /* 21dB */ +#define LNAGX42_DEFAULT_GAIN (0x6C) /* 27dB */ +#define LNAGX43_DEFAULT_GAIN (0x7A) /* 30dB */ +#define LNAGX44_DEFAULT_GAIN (0x84) /* 33dB */ +#define LNAGX45_DEFAULT_GAIN (0x8B) /* 34dB */ +#define LNAGX46_DEFAULT_GAIN (0x92) /* 36dB */ +#define LNAGX47_DEFAULT_GAIN (0x96) /* 37dB */ + +#define CA8210_IOCTL_HARD_RESET (0x00) + +/* Structs/Enums */ + +/** + * struct cas_control - spi transfer structure + * @msg: spi_message for each exchange + * @transfer: spi_transfer for each exchange + * @tx_buf: source array for transmission + * @tx_in_buf: array storing bytes received during transmission + * @priv: pointer to private data + * + * This structure stores all the necessary data passed around during a single + * spi exchange. + */ +struct cas_control { + struct spi_message msg; + struct spi_transfer transfer; + + u8 tx_buf[CA8210_SPI_BUF_SIZE]; + u8 tx_in_buf[CA8210_SPI_BUF_SIZE]; + + struct ca8210_priv *priv; +}; + +/** + * struct ca8210_test - ca8210 test interface structure + * @ca8210_dfs_spi_int: pointer to the entry in the debug fs for this device + * @up_fifo: fifo for upstream messages + * + * This structure stores all the data pertaining to the debug interface + */ +struct ca8210_test { + struct dentry *ca8210_dfs_spi_int; + struct kfifo up_fifo; + wait_queue_head_t readq; +}; + +/** + * struct ca8210_priv - ca8210 private data structure + * @spi: pointer to the ca8210 spi device object + * @hw: pointer to the ca8210 ieee802154_hw object + * @hw_registered: true if hw has been registered with ieee802154 + * @lock: spinlock protecting the private data area + * @mlme_workqueue: workqueue for triggering MLME Reset + * @irq_workqueue: workqueue for irq processing + * @tx_skb: current socket buffer to transmit + * @nextmsduhandle: msdu handle to pass to the 15.4 MAC layer for the + * next transmission + * @clk: external clock provided by the ca8210 + * @last_dsn: sequence number of last data packet received, for + * resend detection + * @test: test interface data section for this instance + * @async_tx_pending: true if an asynchronous transmission was started and + * is not complete + * @sync_command_response: pointer to buffer to fill with sync response + * @ca8210_is_awake: nonzero if ca8210 is initialised, ready for comms + * @sync_down: counts number of downstream synchronous commands + * @sync_up: counts number of upstream synchronous commands + * @spi_transfer_complete completion object for a single spi_transfer + * @sync_exchange_complete completion object for a complete synchronous API + * exchange + * @promiscuous whether the ca8210 is in promiscuous mode or not + * @retries: records how many times the current pending spi + * transfer has been retried + */ +struct ca8210_priv { + struct spi_device *spi; + struct ieee802154_hw *hw; + bool hw_registered; + spinlock_t lock; + struct workqueue_struct *mlme_workqueue; + struct workqueue_struct *irq_workqueue; + struct sk_buff *tx_skb; + u8 nextmsduhandle; + struct clk *clk; + int last_dsn; + struct ca8210_test test; + bool async_tx_pending; + u8 *sync_command_response; + struct completion ca8210_is_awake; + int sync_down, sync_up; + struct completion spi_transfer_complete, sync_exchange_complete; + bool promiscuous; + int retries; +}; + +/** + * struct work_priv_container - link between a work object and the relevant + * device's private data + * @work: work object being executed + * @priv: device's private data section + * + */ +struct work_priv_container { + struct work_struct work; + struct ca8210_priv *priv; +}; + +/** + * struct ca8210_platform_data - ca8210 platform data structure + * @extclockenable: true if the external clock is to be enabled + * @extclockfreq: frequency of the external clock + * @extclockgpio: ca8210 output gpio of the external clock + * @gpio_reset: gpio number of ca8210 reset line + * @gpio_irq: gpio number of ca8210 interrupt line + * @irq_id: identifier for the ca8210 irq + * + */ +struct ca8210_platform_data { + bool extclockenable; + unsigned int extclockfreq; + unsigned int extclockgpio; + int gpio_reset; + int gpio_irq; + int irq_id; +}; + +/** + * struct fulladdr - full MAC addressing information structure + * @mode: address mode (none, short, extended) + * @pan_id: 16-bit LE pan id + * @address: LE address, variable length as specified by mode + * + */ +struct fulladdr { + u8 mode; + u8 pan_id[2]; + u8 address[8]; +}; + +/** + * union macaddr: generic MAC address container + * @short_addr: 16-bit short address + * @ieee_address: 64-bit extended address as LE byte array + * + */ +union macaddr { + u16 short_address; + u8 ieee_address[8]; +}; + +/** + * struct secspec: security specification for SAP commands + * @security_level: 0-7, controls level of authentication & encryption + * @key_id_mode: 0-3, specifies how to obtain key + * @key_source: extended key retrieval data + * @key_index: single-byte key identifier + * + */ +struct secspec { + u8 security_level; + u8 key_id_mode; + u8 key_source[8]; + u8 key_index; +}; + +/* downlink functions parameter set definitions */ +struct mcps_data_request_pset { + u8 src_addr_mode; + struct fulladdr dst; + u8 msdu_length; + u8 msdu_handle; + u8 tx_options; + u8 msdu[MAX_DATA_SIZE]; +}; + +struct mlme_set_request_pset { + u8 pib_attribute; + u8 pib_attribute_index; + u8 pib_attribute_length; + u8 pib_attribute_value[MAX_ATTRIBUTE_SIZE]; +}; + +struct hwme_set_request_pset { + u8 hw_attribute; + u8 hw_attribute_length; + u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; +}; + +struct hwme_get_request_pset { + u8 hw_attribute; +}; + +struct tdme_setsfr_request_pset { + u8 sfr_page; + u8 sfr_address; + u8 sfr_value; +}; + +/* uplink functions parameter set definitions */ +struct hwme_set_confirm_pset { + u8 status; + u8 hw_attribute; +}; + +struct hwme_get_confirm_pset { + u8 status; + u8 hw_attribute; + u8 hw_attribute_length; + u8 hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE]; +}; + +struct tdme_setsfr_confirm_pset { + u8 status; + u8 sfr_page; + u8 sfr_address; +}; + +struct mac_message { + u8 command_id; + u8 length; + union { + struct mcps_data_request_pset data_req; + struct mlme_set_request_pset set_req; + struct hwme_set_request_pset hwme_set_req; + struct hwme_get_request_pset hwme_get_req; + struct tdme_setsfr_request_pset tdme_set_sfr_req; + struct hwme_set_confirm_pset hwme_set_cnf; + struct hwme_get_confirm_pset hwme_get_cnf; + struct tdme_setsfr_confirm_pset tdme_set_sfr_cnf; + u8 u8param; + u8 status; + u8 payload[148]; + } pdata; +}; + +union pa_cfg_sfr { + struct { + u8 bias_current_trim : 3; + u8 /* reserved */ : 1; + u8 buffer_capacitor_trim : 3; + u8 boost : 1; + }; + u8 paib; +}; + +struct preamble_cfg_sfr { + u8 timeout_symbols : 3; + u8 acquisition_symbols : 3; + u8 search_symbols : 2; +}; + +static int (*cascoda_api_upstream)( + const u8 *buf, + size_t len, + void *device_ref +); + +/** + * link_to_linux_err() - Translates an 802.15.4 return code into the closest + * linux error + * @link_status: 802.15.4 status code + * + * Return: 0 or Linux error code + */ +static int link_to_linux_err(int link_status) +{ + if (link_status < 0) { + /* status is already a Linux code */ + return link_status; + } + switch (link_status) { + case MAC_SUCCESS: + case MAC_REALIGNMENT: + return 0; + case MAC_IMPROPER_KEY_TYPE: + return -EKEYREJECTED; + case MAC_IMPROPER_SECURITY_LEVEL: + case MAC_UNSUPPORTED_LEGACY: + case MAC_DENIED: + return -EACCES; + case MAC_BEACON_LOST: + case MAC_NO_ACK: + case MAC_NO_BEACON: + return -ENETUNREACH; + case MAC_CHANNEL_ACCESS_FAILURE: + case MAC_TX_ACTIVE: + case MAC_SCAN_IN_PROGRESS: + return -EBUSY; + case MAC_DISABLE_TRX_FAILURE: + case MAC_OUT_OF_CAP: + return -EAGAIN; + case MAC_FRAME_TOO_LONG: + return -EMSGSIZE; + case MAC_INVALID_GTS: + case MAC_PAST_TIME: + return -EBADSLT; + case MAC_INVALID_HANDLE: + return -EBADMSG; + case MAC_INVALID_PARAMETER: + case MAC_UNSUPPORTED_ATTRIBUTE: + case MAC_ON_TIME_TOO_LONG: + case MAC_INVALID_INDEX: + return -EINVAL; + case MAC_NO_DATA: + return -ENODATA; + case MAC_NO_SHORT_ADDRESS: + return -EFAULT; + case MAC_PAN_ID_CONFLICT: + return -EADDRINUSE; + case MAC_TRANSACTION_EXPIRED: + return -ETIME; + case MAC_TRANSACTION_OVERFLOW: + return -ENOBUFS; + case MAC_UNAVAILABLE_KEY: + return -ENOKEY; + case MAC_INVALID_ADDRESS: + return -ENXIO; + case MAC_TRACKING_OFF: + case MAC_SUPERFRAME_OVERLAP: + return -EREMOTEIO; + case MAC_LIMIT_REACHED: + return -EDQUOT; + case MAC_READ_ONLY: + return -EROFS; + default: + return -EPROTO; + } +} + +/** + * ca8210_test_int_driver_write() - Writes a message to the test interface to be + * read by the userspace + * @buf: Buffer containing upstream message + * @len: length of message to write + * @spi: SPI device of message originator + * + * Return: 0 or linux error code + */ +static int ca8210_test_int_driver_write( + const u8 *buf, + size_t len, + void *spi +) +{ + struct ca8210_priv *priv = spi_get_drvdata(spi); + struct ca8210_test *test = &priv->test; + char *fifo_buffer; + int i; + + dev_dbg( + &priv->spi->dev, + "test_interface: Buffering upstream message:\n" + ); + for (i = 0; i < len; i++) + dev_dbg(&priv->spi->dev, "%#03x\n", buf[i]); + + fifo_buffer = kmalloc(len, GFP_KERNEL); + memcpy(fifo_buffer, buf, len); + kfifo_in(&test->up_fifo, &fifo_buffer, 4); + wake_up_interruptible(&priv->test.readq); + + return 0; +} + +/* SPI Operation */ + +static int ca8210_net_rx( + struct ieee802154_hw *hw, + u8 *command, + size_t len +); +static u8 mlme_reset_request_sync( + u8 set_default_pib, + void *device_ref +); +static int ca8210_spi_transfer( + struct spi_device *spi, + const u8 *buf, + size_t len +); + +/** + * ca8210_reset_send() - Hard resets the ca8210 for a given time + * @spi: Pointer to target ca8210 spi device + * @ms: Milliseconds to hold the reset line low for + */ +static void ca8210_reset_send(struct spi_device *spi, unsigned int ms) +{ + struct ca8210_platform_data *pdata = spi->dev.platform_data; + struct ca8210_priv *priv = spi_get_drvdata(spi); + long status; + + gpio_set_value(pdata->gpio_reset, 0); + reinit_completion(&priv->ca8210_is_awake); + msleep(ms); + gpio_set_value(pdata->gpio_reset, 1); + priv->promiscuous = false; + + /* Wait until wakeup indication seen */ + status = wait_for_completion_interruptible_timeout( + &priv->ca8210_is_awake, + msecs_to_jiffies(CA8210_SYNC_TIMEOUT) + ); + if (status == 0) { + dev_crit( + &spi->dev, + "Fatal: No wakeup from ca8210 after reset!\n" + ); + } + + dev_dbg(&spi->dev, "Reset the device\n"); +} + +/** + * ca8210_mlme_reset_worker() - Resets the MLME, Called when the MAC OVERFLOW + * condition happens. + * @work: Pointer to work being executed + */ +static void ca8210_mlme_reset_worker(struct work_struct *work) +{ + struct work_priv_container *wpc = container_of( + work, + struct work_priv_container, + work + ); + struct ca8210_priv *priv = wpc->priv; + + mlme_reset_request_sync(0, priv->spi); + kfree(wpc); +} + +/** + * ca8210_rx_done() - Calls various message dispatches responding to a received + * command + * @arg: Pointer to the cas_control object for the relevant spi transfer + * + * Presents a received SAP command from the ca8210 to the Cascoda EVBME, test + * interface and network driver. + */ +static void ca8210_rx_done(struct cas_control *cas_ctl) +{ + u8 *buf; + u8 len; + struct work_priv_container *mlme_reset_wpc; + struct ca8210_priv *priv = cas_ctl->priv; + + buf = cas_ctl->tx_in_buf; + len = buf[1] + 2; + if (len > CA8210_SPI_BUF_SIZE) { + dev_crit( + &priv->spi->dev, + "Received packet len (%d) erroneously long\n", + len + ); + goto finish; + } + + if (buf[0] & SPI_SYN) { + if (priv->sync_command_response) { + memcpy(priv->sync_command_response, buf, len); + complete(&priv->sync_exchange_complete); + } else { + if (cascoda_api_upstream) + cascoda_api_upstream(buf, len, priv->spi); + priv->sync_up++; + } + } else { + if (cascoda_api_upstream) + cascoda_api_upstream(buf, len, priv->spi); + } + + ca8210_net_rx(priv->hw, buf, len); + if (buf[0] == SPI_MCPS_DATA_CONFIRM) { + if (buf[3] == MAC_TRANSACTION_OVERFLOW) { + dev_info( + &priv->spi->dev, + "Waiting for transaction overflow to stabilise...\n"); + msleep(2000); + dev_info( + &priv->spi->dev, + "Resetting MAC...\n"); + + mlme_reset_wpc = kmalloc( + sizeof(struct work_priv_container), + GFP_KERNEL + ); + INIT_WORK( + &mlme_reset_wpc->work, + ca8210_mlme_reset_worker + ); + mlme_reset_wpc->priv = priv; + queue_work(priv->mlme_workqueue, &mlme_reset_wpc->work); + } + } else if (buf[0] == SPI_HWME_WAKEUP_INDICATION) { + dev_notice( + &priv->spi->dev, + "Wakeup indication received, reason:\n" + ); + switch (buf[2]) { + case 0: + dev_notice( + &priv->spi->dev, + "Transceiver woken up from Power Up / System Reset\n" + ); + break; + case 1: + dev_notice( + &priv->spi->dev, + "Watchdog Timer Time-Out\n" + ); + break; + case 2: + dev_notice( + &priv->spi->dev, + "Transceiver woken up from Power-Off by Sleep Timer Time-Out\n"); + break; + case 3: + dev_notice( + &priv->spi->dev, + "Transceiver woken up from Power-Off by GPIO Activity\n" + ); + break; + case 4: + dev_notice( + &priv->spi->dev, + "Transceiver woken up from Standby by Sleep Timer Time-Out\n" + ); + break; + case 5: + dev_notice( + &priv->spi->dev, + "Transceiver woken up from Standby by GPIO Activity\n" + ); + break; + case 6: + dev_notice( + &priv->spi->dev, + "Sleep-Timer Time-Out in Active Mode\n" + ); + break; + default: + dev_warn(&priv->spi->dev, "Wakeup reason unknown\n"); + break; + } + complete(&priv->ca8210_is_awake); + } + +finish:; +} + +static int ca8210_remove(struct spi_device *spi_device); + +/** + * ca8210_spi_transfer_complete() - Called when a single spi transfer has + * completed + * @context: Pointer to the cas_control object for the finished transfer + */ +static void ca8210_spi_transfer_complete(void *context) +{ + struct cas_control *cas_ctl = context; + struct ca8210_priv *priv = cas_ctl->priv; + bool duplex_rx = false; + int i; + u8 retry_buffer[CA8210_SPI_BUF_SIZE]; + + if ( + cas_ctl->tx_in_buf[0] == SPI_NACK || + (cas_ctl->tx_in_buf[0] == SPI_IDLE && + cas_ctl->tx_in_buf[1] == SPI_NACK) + ) { + /* ca8210 is busy */ + dev_info(&priv->spi->dev, "ca8210 was busy during attempted write\n"); + if (cas_ctl->tx_buf[0] == SPI_IDLE) { + dev_warn( + &priv->spi->dev, + "IRQ servicing NACKd, dropping transfer\n" + ); + kfree(cas_ctl); + return; + } + if (priv->retries > 3) { + dev_err(&priv->spi->dev, "too many retries!\n"); + kfree(cas_ctl); + ca8210_remove(priv->spi); + return; + } + memcpy(retry_buffer, cas_ctl->tx_buf, CA8210_SPI_BUF_SIZE); + kfree(cas_ctl); + ca8210_spi_transfer( + priv->spi, + retry_buffer, + CA8210_SPI_BUF_SIZE + ); + priv->retries++; + dev_info(&priv->spi->dev, "retried spi write\n"); + return; + } else if ( + cas_ctl->tx_in_buf[0] != SPI_IDLE && + cas_ctl->tx_in_buf[0] != SPI_NACK + ) { + duplex_rx = true; + } + + if (duplex_rx) { + dev_dbg(&priv->spi->dev, "READ CMD DURING TX\n"); + for (i = 0; i < cas_ctl->tx_in_buf[1] + 2; i++) + dev_dbg( + &priv->spi->dev, + "%#03x\n", + cas_ctl->tx_in_buf[i] + ); + ca8210_rx_done(cas_ctl); + } + complete(&priv->spi_transfer_complete); + kfree(cas_ctl); + priv->retries = 0; +} + +/** + * ca8210_spi_transfer() - Initiate duplex spi transfer with ca8210 + * @spi: Pointer to spi device for transfer + * @buf: Octet array to send + * @len: length of the buffer being sent + * + * Return: 0 or linux error code + */ +static int ca8210_spi_transfer( + struct spi_device *spi, + const u8 *buf, + size_t len +) +{ + int i, status = 0; + struct ca8210_priv *priv = spi_get_drvdata(spi); + struct cas_control *cas_ctl; + + if (!spi) { + dev_crit( + &spi->dev, + "NULL spi device passed to ca8210_spi_transfer\n" + ); + return -ENODEV; + } + + reinit_completion(&priv->spi_transfer_complete); + + dev_dbg(&spi->dev, "ca8210_spi_transfer called\n"); + + cas_ctl = kmalloc( + sizeof(struct cas_control), + GFP_ATOMIC + ); + cas_ctl->priv = priv; + memset(cas_ctl->tx_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); + memset(cas_ctl->tx_in_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE); + memcpy(cas_ctl->tx_buf, buf, len); + + for (i = 0; i < len; i++) + dev_dbg(&spi->dev, "%#03x\n", cas_ctl->tx_buf[i]); + + spi_message_init(&cas_ctl->msg); + + cas_ctl->transfer.tx_nbits = 1; /* 1 MOSI line */ + cas_ctl->transfer.rx_nbits = 1; /* 1 MISO line */ + cas_ctl->transfer.speed_hz = 0; /* Use device setting */ + cas_ctl->transfer.bits_per_word = 0; /* Use device setting */ + cas_ctl->transfer.tx_buf = cas_ctl->tx_buf; + cas_ctl->transfer.rx_buf = cas_ctl->tx_in_buf; + cas_ctl->transfer.delay_usecs = 0; + cas_ctl->transfer.cs_change = 0; + cas_ctl->transfer.len = sizeof(struct mac_message); + cas_ctl->msg.complete = ca8210_spi_transfer_complete; + cas_ctl->msg.context = cas_ctl; + + spi_message_add_tail( + &cas_ctl->transfer, + &cas_ctl->msg + ); + + status = spi_async(spi, &cas_ctl->msg); + if (status < 0) { + dev_crit( + &spi->dev, + "status %d from spi_sync in write\n", + status + ); + } + + return status; +} + +/** + * ca8210_spi_exchange() - Exchange API/SAP commands with the radio + * @buf: Octet array of command being sent downstream + * @len: length of buf + * @response: buffer for storing synchronous response + * @device_ref: spi_device pointer for ca8210 + * + * Effectively calls ca8210_spi_transfer to write buf[] to the spi, then for + * synchronous commands waits for the corresponding response to be read from + * the spi before returning. The response is written to the response parameter. + * + * Return: 0 or linux error code + */ +static int ca8210_spi_exchange( + const u8 *buf, + size_t len, + u8 *response, + void *device_ref +) +{ + int status = 0; + struct spi_device *spi = device_ref; + struct ca8210_priv *priv = spi->dev.driver_data; + long wait_remaining; + + if ((buf[0] & SPI_SYN) && response) { /* if sync wait for confirm */ + reinit_completion(&priv->sync_exchange_complete); + priv->sync_command_response = response; + } + + do { + reinit_completion(&priv->spi_transfer_complete); + status = ca8210_spi_transfer(priv->spi, buf, len); + if (status) { + dev_warn( + &spi->dev, + "spi write failed, returned %d\n", + status + ); + if (status == -EBUSY) + continue; + if (((buf[0] & SPI_SYN) && response)) + complete(&priv->sync_exchange_complete); + goto cleanup; + } + + wait_remaining = wait_for_completion_interruptible_timeout( + &priv->spi_transfer_complete, + msecs_to_jiffies(1000) + ); + if (wait_remaining == -ERESTARTSYS) { + status = -ERESTARTSYS; + } else if (wait_remaining == 0) { + dev_err( + &spi->dev, + "SPI downstream transfer timed out!\n" + ); + status = -ETIME; + goto cleanup; + } + } while (status < 0); + + if (!((buf[0] & SPI_SYN) && response)) + goto cleanup; + + wait_remaining = wait_for_completion_interruptible_timeout( + &priv->sync_exchange_complete, + msecs_to_jiffies(CA8210_SYNC_TIMEOUT) + ); + if (wait_remaining == -ERESTARTSYS) { + status = -ERESTARTSYS; + } else if (wait_remaining == 0) { + dev_err( + &spi->dev, + "Synchronous confirm timeout\n" + ); + status = -ETIME; + } + +cleanup: + priv->sync_command_response = NULL; + return status; +} + +/** + * ca8210_interrupt_handler() - Called when an irq is received from the ca8210 + * @irq: Id of the irq being handled + * @dev_id: Pointer passed by the system, pointing to the ca8210's private data + * + * This function is called when the irq line from the ca8210 is asserted, + * signifying that the ca8210 has a message to send upstream to us. Starts the + * asynchronous spi read. + * + * Return: irq return code + */ +static irqreturn_t ca8210_interrupt_handler(int irq, void *dev_id) +{ + struct ca8210_priv *priv = dev_id; + int status; + + dev_dbg(&priv->spi->dev, "irq: Interrupt occurred\n"); + do { + status = ca8210_spi_transfer(priv->spi, NULL, 0); + if (status && (status != -EBUSY)) { + dev_warn( + &priv->spi->dev, + "spi read failed, returned %d\n", + status + ); + } + } while (status == -EBUSY); + return IRQ_HANDLED; +} + +static int (*cascoda_api_downstream)( + const u8 *buf, + size_t len, + u8 *response, + void *device_ref +) = ca8210_spi_exchange; + +/* Cascoda API / 15.4 SAP Primitives */ + +/** + * tdme_setsfr_request_sync() - TDME_SETSFR_request/confirm according to API + * @sfr_page: SFR Page + * @sfr_address: SFR Address + * @sfr_value: SFR Value + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of TDME-SETSFR.confirm + */ +static u8 tdme_setsfr_request_sync( + u8 sfr_page, + u8 sfr_address, + u8 sfr_value, + void *device_ref +) +{ + int ret; + struct mac_message command, response; + struct spi_device *spi = device_ref; + + command.command_id = SPI_TDME_SETSFR_REQUEST; + command.length = 3; + command.pdata.tdme_set_sfr_req.sfr_page = sfr_page; + command.pdata.tdme_set_sfr_req.sfr_address = sfr_address; + command.pdata.tdme_set_sfr_req.sfr_value = sfr_value; + response.command_id = SPI_IDLE; + ret = cascoda_api_downstream( + &command.command_id, + command.length + 2, + &response.command_id, + device_ref + ); + if (ret) { + dev_crit(&spi->dev, "cascoda_api_downstream returned %d", ret); + return MAC_SYSTEM_ERROR; + } + + if (response.command_id != SPI_TDME_SETSFR_CONFIRM) { + dev_crit( + &spi->dev, + "sync response to SPI_TDME_SETSFR_REQUEST was not SPI_TDME_SETSFR_CONFIRM, it was %d\n", + response.command_id + ); + return MAC_SYSTEM_ERROR; + } + + return response.pdata.tdme_set_sfr_cnf.status; +} + +/** + * tdme_chipinit() - TDME Chip Register Default Initialisation Macro + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of API calls + */ +static u8 tdme_chipinit(void *device_ref) +{ + u8 status = MAC_SUCCESS; + u8 sfr_address; + struct spi_device *spi = device_ref; + struct preamble_cfg_sfr pre_cfg_value = { + .timeout_symbols = 3, + .acquisition_symbols = 3, + .search_symbols = 1, + }; + /* LNA Gain Settings */ + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX40), + LNAGX40_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX41), + LNAGX41_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX42), + LNAGX42_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX43), + LNAGX43_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX44), + LNAGX44_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX45), + LNAGX45_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX46), + LNAGX46_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_LNAGX47), + LNAGX47_DEFAULT_GAIN, device_ref); + if (status) + goto finish; + /* Preamble Timing Config */ + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_PRECFG), + *((u8 *)&pre_cfg_value), device_ref); + if (status) + goto finish; + /* Preamble Threshold High */ + status = tdme_setsfr_request_sync( + 1, (sfr_address = CA8210_SFR_PTHRH), + PTHRH_DEFAULT_THRESHOLD, device_ref); + if (status) + goto finish; + /* Tx Output Power 8 dBm */ + status = tdme_setsfr_request_sync( + 0, (sfr_address = CA8210_SFR_PACFGIB), + PACFGIB_DEFAULT_CURRENT, device_ref); + if (status) + goto finish; + +finish: + if (status != MAC_SUCCESS) { + dev_err( + &spi->dev, + "failed to set sfr at %#03x, status = %#03x\n", + sfr_address, + status + ); + } + return status; +} + +/** + * tdme_channelinit() - TDME Channel Register Default Initialisation Macro (Tx) + * @channel: 802.15.4 channel to initialise chip for + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of API calls + */ +static u8 tdme_channelinit(u8 channel, void *device_ref) +{ + /* Transceiver front-end local oscillator tx two-point calibration + * value. Tuned for the hardware. + */ + u8 txcalval; + + if (channel >= 25) + txcalval = 0xA7; + else if (channel >= 23) + txcalval = 0xA8; + else if (channel >= 22) + txcalval = 0xA9; + else if (channel >= 20) + txcalval = 0xAA; + else if (channel >= 17) + txcalval = 0xAB; + else if (channel >= 16) + txcalval = 0xAC; + else if (channel >= 14) + txcalval = 0xAD; + else if (channel >= 12) + txcalval = 0xAE; + else + txcalval = 0xAF; + + return tdme_setsfr_request_sync( + 1, + CA8210_SFR_LOTXCAL, + txcalval, + device_ref + ); /* LO Tx Cal */ +} + +/** + * tdme_checkpibattribute() - Checks Attribute Values that are not checked in + * MAC + * @pib_attribute: Attribute Number + * @pib_attribute_length: Attribute length + * @pib_attribute_value: Pointer to Attribute Value + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of checks + */ +static u8 tdme_checkpibattribute( + u8 pib_attribute, + u8 pib_attribute_length, + const void *pib_attribute_value +) +{ + u8 status = MAC_SUCCESS; + u8 value; + + value = *((u8 *)pib_attribute_value); + + switch (pib_attribute) { + /* PHY */ + case PHY_TRANSMIT_POWER: + if (value > 0x3F) + status = MAC_INVALID_PARAMETER; + break; + case PHY_CCA_MODE: + if (value > 0x03) + status = MAC_INVALID_PARAMETER; + break; + /* MAC */ + case MAC_BATT_LIFE_EXT_PERIODS: + if ((value < 6) || (value > 41)) + status = MAC_INVALID_PARAMETER; + break; + case MAC_BEACON_PAYLOAD: + if (pib_attribute_length > MAX_BEACON_PAYLOAD_LENGTH) + status = MAC_INVALID_PARAMETER; + break; + case MAC_BEACON_PAYLOAD_LENGTH: + if (value > MAX_BEACON_PAYLOAD_LENGTH) + status = MAC_INVALID_PARAMETER; + break; + case MAC_BEACON_ORDER: + if (value > 15) + status = MAC_INVALID_PARAMETER; + break; + case MAC_MAX_BE: + if ((value < 3) || (value > 8)) + status = MAC_INVALID_PARAMETER; + break; + case MAC_MAX_CSMA_BACKOFFS: + if (value > 5) + status = MAC_INVALID_PARAMETER; + break; + case MAC_MAX_FRAME_RETRIES: + if (value > 7) + status = MAC_INVALID_PARAMETER; + break; + case MAC_MIN_BE: + if (value > 8) + status = MAC_INVALID_PARAMETER; + break; + case MAC_RESPONSE_WAIT_TIME: + if ((value < 2) || (value > 64)) + status = MAC_INVALID_PARAMETER; + break; + case MAC_SUPERFRAME_ORDER: + if (value > 15) + status = MAC_INVALID_PARAMETER; + break; + /* boolean */ + case MAC_ASSOCIATED_PAN_COORD: + case MAC_ASSOCIATION_PERMIT: + case MAC_AUTO_REQUEST: + case MAC_BATT_LIFE_EXT: + case MAC_GTS_PERMIT: + case MAC_PROMISCUOUS_MODE: + case MAC_RX_ON_WHEN_IDLE: + case MAC_SECURITY_ENABLED: + if (value > 1) + status = MAC_INVALID_PARAMETER; + break; + /* MAC SEC */ + case MAC_AUTO_REQUEST_SECURITY_LEVEL: + if (value > 7) + status = MAC_INVALID_PARAMETER; + break; + case MAC_AUTO_REQUEST_KEY_ID_MODE: + if (value > 3) + status = MAC_INVALID_PARAMETER; + break; + default: + break; + } + + return status; +} + +/** + * tdme_settxpower() - Sets the tx power for MLME_SET phyTransmitPower + * @txp: Transmit Power + * @device_ref: Nondescript pointer to target device + * + * Normalised to 802.15.4 Definition (6-bit, signed): + * Bit 7-6: not used + * Bit 5-0: tx power (-32 - +31 dB) + * + * Return: 802.15.4 status code of api calls + */ +static u8 tdme_settxpower(u8 txp, void *device_ref) +{ + u8 status; + s8 txp_val; + u8 txp_ext; + union pa_cfg_sfr pa_cfg_val; + + /* extend from 6 to 8 bit */ + txp_ext = 0x3F & txp; + if (txp_ext & 0x20) + txp_ext += 0xC0; + txp_val = (s8)txp_ext; + + if (CA8210_MAC_MPW) { + if (txp_val > 0) { + /* 8 dBm: ptrim = 5, itrim = +3 => +4 dBm */ + pa_cfg_val.bias_current_trim = 3; + pa_cfg_val.buffer_capacitor_trim = 5; + pa_cfg_val.boost = 1; + } else { + /* 0 dBm: ptrim = 7, itrim = +3 => -6 dBm */ + pa_cfg_val.bias_current_trim = 3; + pa_cfg_val.buffer_capacitor_trim = 7; + pa_cfg_val.boost = 0; + } + /* write PACFG */ + status = tdme_setsfr_request_sync( + 0, + CA8210_SFR_PACFG, + pa_cfg_val.paib, + device_ref + ); + } else { + /* Look-Up Table for Setting Current and Frequency Trim values + * for desired Output Power + */ + if (txp_val > 8) { + pa_cfg_val.paib = 0x3F; + } else if (txp_val == 8) { + pa_cfg_val.paib = 0x32; + } else if (txp_val == 7) { + pa_cfg_val.paib = 0x22; + } else if (txp_val == 6) { + pa_cfg_val.paib = 0x18; + } else if (txp_val == 5) { + pa_cfg_val.paib = 0x10; + } else if (txp_val == 4) { + pa_cfg_val.paib = 0x0C; + } else if (txp_val == 3) { + pa_cfg_val.paib = 0x08; + } else if (txp_val == 2) { + pa_cfg_val.paib = 0x05; + } else if (txp_val == 1) { + pa_cfg_val.paib = 0x03; + } else if (txp_val == 0) { + pa_cfg_val.paib = 0x01; + } else { /* < 0 */ + pa_cfg_val.paib = 0x00; + } + /* write PACFGIB */ + status = tdme_setsfr_request_sync( + 0, + CA8210_SFR_PACFGIB, + pa_cfg_val.paib, + device_ref + ); + } + + return status; +} + +/** + * mcps_data_request() - mcps_data_request (Send Data) according to API Spec + * @src_addr_mode: Source Addressing Mode + * @dst_address_mode: Destination Addressing Mode + * @dst_pan_id: Destination PAN ID + * @dst_addr: Pointer to Destination Address + * @msdu_length: length of Data + * @msdu: Pointer to Data + * @msdu_handle: Handle of Data + * @tx_options: Tx Options Bit Field + * @security: Pointer to Security Structure or NULL + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of action + */ +static u8 mcps_data_request( + u8 src_addr_mode, + u8 dst_address_mode, + u16 dst_pan_id, + union macaddr *dst_addr, + u8 msdu_length, + u8 *msdu, + u8 msdu_handle, + u8 tx_options, + struct secspec *security, + void *device_ref +) +{ + struct secspec *psec; + struct mac_message command; + + command.command_id = SPI_MCPS_DATA_REQUEST; + command.pdata.data_req.src_addr_mode = src_addr_mode; + command.pdata.data_req.dst.mode = dst_address_mode; + if (dst_address_mode != MAC_MODE_NO_ADDR) { + command.pdata.data_req.dst.pan_id[0] = LS_BYTE(dst_pan_id); + command.pdata.data_req.dst.pan_id[1] = MS_BYTE(dst_pan_id); + if (dst_address_mode == MAC_MODE_SHORT_ADDR) { + command.pdata.data_req.dst.address[0] = LS_BYTE( + dst_addr->short_address + ); + command.pdata.data_req.dst.address[1] = MS_BYTE( + dst_addr->short_address + ); + } else { /* MAC_MODE_LONG_ADDR*/ + memcpy( + command.pdata.data_req.dst.address, + dst_addr->ieee_address, + 8 + ); + } + } + command.pdata.data_req.msdu_length = msdu_length; + command.pdata.data_req.msdu_handle = msdu_handle; + command.pdata.data_req.tx_options = tx_options; + memcpy(command.pdata.data_req.msdu, msdu, msdu_length); + psec = (struct secspec *)(command.pdata.data_req.msdu + msdu_length); + command.length = sizeof(struct mcps_data_request_pset) - + MAX_DATA_SIZE + msdu_length; + if (!security || (security->security_level == 0)) { + psec->security_level = 0; + command.length += 1; + } else { + *psec = *security; + command.length += sizeof(struct secspec); + } + + if (ca8210_spi_transfer(device_ref, &command.command_id, + command.length + 2)) + return MAC_SYSTEM_ERROR; + + return MAC_SUCCESS; +} + +/** + * mlme_reset_request_sync() - MLME_RESET_request/confirm according to API Spec + * @set_default_pib: Set defaults in PIB + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of MLME-RESET.confirm + */ +static u8 mlme_reset_request_sync( + u8 set_default_pib, + void *device_ref +) +{ + u8 status; + struct mac_message command, response; + struct spi_device *spi = device_ref; + + command.command_id = SPI_MLME_RESET_REQUEST; + command.length = 1; + command.pdata.u8param = set_default_pib; + + if (cascoda_api_downstream( + &command.command_id, + command.length + 2, + &response.command_id, + device_ref)) { + dev_err(&spi->dev, "cascoda_api_downstream failed\n"); + return MAC_SYSTEM_ERROR; + } + + if (response.command_id != SPI_MLME_RESET_CONFIRM) + return MAC_SYSTEM_ERROR; + + status = response.pdata.status; + + /* reset COORD Bit for Channel Filtering as Coordinator */ + if (CA8210_MAC_WORKAROUNDS && set_default_pib && (!status)) { + status = tdme_setsfr_request_sync( + 0, + CA8210_SFR_MACCON, + 0, + device_ref + ); + } + + return status; +} + +/** + * mlme_set_request_sync() - MLME_SET_request/confirm according to API Spec + * @pib_attribute: Attribute Number + * @pib_attribute_index: Index within Attribute if an Array + * @pib_attribute_length: Attribute length + * @pib_attribute_value: Pointer to Attribute Value + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of MLME-SET.confirm + */ +static u8 mlme_set_request_sync( + u8 pib_attribute, + u8 pib_attribute_index, + u8 pib_attribute_length, + const void *pib_attribute_value, + void *device_ref +) +{ + u8 status; + struct mac_message command, response; + + /* pre-check the validity of pib_attribute values that are not checked + * in MAC + */ + if (tdme_checkpibattribute( + pib_attribute, pib_attribute_length, pib_attribute_value)) { + return MAC_INVALID_PARAMETER; + } + + if (pib_attribute == PHY_CURRENT_CHANNEL) { + status = tdme_channelinit( + *((u8 *)pib_attribute_value), + device_ref + ); + if (status) + return status; + } + + if (pib_attribute == PHY_TRANSMIT_POWER) { + return tdme_settxpower( + *((u8 *)pib_attribute_value), + device_ref + ); + } + + command.command_id = SPI_MLME_SET_REQUEST; + command.length = sizeof(struct mlme_set_request_pset) - + MAX_ATTRIBUTE_SIZE + pib_attribute_length; + command.pdata.set_req.pib_attribute = pib_attribute; + command.pdata.set_req.pib_attribute_index = pib_attribute_index; + command.pdata.set_req.pib_attribute_length = pib_attribute_length; + memcpy( + command.pdata.set_req.pib_attribute_value, + pib_attribute_value, + pib_attribute_length + ); + + if (cascoda_api_downstream( + &command.command_id, + command.length + 2, + &response.command_id, + device_ref)) { + return MAC_SYSTEM_ERROR; + } + + if (response.command_id != SPI_MLME_SET_CONFIRM) + return MAC_SYSTEM_ERROR; + + return response.pdata.status; +} + +/** + * hwme_set_request_sync() - HWME_SET_request/confirm according to API Spec + * @hw_attribute: Attribute Number + * @hw_attribute_length: Attribute length + * @hw_attribute_value: Pointer to Attribute Value + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of HWME-SET.confirm + */ +static u8 hwme_set_request_sync( + u8 hw_attribute, + u8 hw_attribute_length, + u8 *hw_attribute_value, + void *device_ref +) +{ + struct mac_message command, response; + + command.command_id = SPI_HWME_SET_REQUEST; + command.length = 2 + hw_attribute_length; + command.pdata.hwme_set_req.hw_attribute = hw_attribute; + command.pdata.hwme_set_req.hw_attribute_length = hw_attribute_length; + memcpy( + command.pdata.hwme_set_req.hw_attribute_value, + hw_attribute_value, + hw_attribute_length + ); + + if (cascoda_api_downstream( + &command.command_id, + command.length + 2, + &response.command_id, + device_ref)) { + return MAC_SYSTEM_ERROR; + } + + if (response.command_id != SPI_HWME_SET_CONFIRM) + return MAC_SYSTEM_ERROR; + + return response.pdata.hwme_set_cnf.status; +} + +/** + * hwme_get_request_sync() - HWME_GET_request/confirm according to API Spec + * @hw_attribute: Attribute Number + * @hw_attribute_length: Attribute length + * @hw_attribute_value: Pointer to Attribute Value + * @device_ref: Nondescript pointer to target device + * + * Return: 802.15.4 status code of HWME-GET.confirm + */ +static u8 hwme_get_request_sync( + u8 hw_attribute, + u8 *hw_attribute_length, + u8 *hw_attribute_value, + void *device_ref +) +{ + struct mac_message command, response; + + command.command_id = SPI_HWME_GET_REQUEST; + command.length = 1; + command.pdata.hwme_get_req.hw_attribute = hw_attribute; + + if (cascoda_api_downstream( + &command.command_id, + command.length + 2, + &response.command_id, + device_ref)) { + return MAC_SYSTEM_ERROR; + } + + if (response.command_id != SPI_HWME_GET_CONFIRM) + return MAC_SYSTEM_ERROR; + + if (response.pdata.hwme_get_cnf.status == MAC_SUCCESS) { + *hw_attribute_length = + response.pdata.hwme_get_cnf.hw_attribute_length; + memcpy( + hw_attribute_value, + response.pdata.hwme_get_cnf.hw_attribute_value, + *hw_attribute_length + ); + } + + return response.pdata.hwme_get_cnf.status; +} + +/* Network driver operation */ + +/** + * ca8210_async_xmit_complete() - Called to announce that an asynchronous + * transmission has finished + * @hw: ieee802154_hw of ca8210 that has finished exchange + * @msduhandle: Identifier of transmission that has completed + * @status: Returned 802.15.4 status code of the transmission + * + * Return: 0 or linux error code + */ +static int ca8210_async_xmit_complete( + struct ieee802154_hw *hw, + u8 msduhandle, + u8 status) +{ + struct ca8210_priv *priv = hw->priv; + + if (priv->nextmsduhandle != msduhandle) { + dev_err( + &priv->spi->dev, + "Unexpected msdu_handle on data confirm, Expected %d, got %d\n", + priv->nextmsduhandle, + msduhandle + ); + return -EIO; + } + + priv->async_tx_pending = false; + priv->nextmsduhandle++; + + if (status) { + dev_err( + &priv->spi->dev, + "Link transmission unsuccessful, status = %d\n", + status + ); + if (status != MAC_TRANSACTION_OVERFLOW) { + ieee802154_wake_queue(priv->hw); + return 0; + } + } + ieee802154_xmit_complete(priv->hw, priv->tx_skb, true); + + return 0; +} + +/** + * ca8210_skb_rx() - Contructs a properly framed socket buffer from a received + * MCPS_DATA_indication + * @hw: ieee802154_hw that MCPS_DATA_indication was received by + * @len: length of MCPS_DATA_indication + * @data_ind: Octet array of MCPS_DATA_indication + * + * Called by the spi driver whenever a SAP command is received, this function + * will ascertain whether the command is of interest to the network driver and + * take necessary action. + * + * Return: 0 or linux error code + */ +static int ca8210_skb_rx( + struct ieee802154_hw *hw, + size_t len, + u8 *data_ind +) +{ + struct ieee802154_hdr hdr; + int msdulen; + int hlen; + u8 mpdulinkquality = data_ind[23]; + struct sk_buff *skb; + struct ca8210_priv *priv = hw->priv; + + /* Allocate mtu size buffer for every rx packet */ + skb = dev_alloc_skb(IEEE802154_MTU + sizeof(hdr)); + if (!skb) { + dev_crit(&priv->spi->dev, "dev_alloc_skb failed\n"); + return -ENOMEM; + } + skb_reserve(skb, sizeof(hdr)); + + msdulen = data_ind[22]; /* msdu_length */ + if (msdulen > IEEE802154_MTU) { + dev_err( + &priv->spi->dev, + "received erroneously large msdu length!\n" + ); + kfree_skb(skb); + return -EMSGSIZE; + } + dev_dbg(&priv->spi->dev, "skb buffer length = %d\n", msdulen); + + if (priv->promiscuous) + goto copy_payload; + + /* Populate hdr */ + hdr.sec.level = data_ind[29 + msdulen]; + dev_dbg(&priv->spi->dev, "security level: %#03x\n", hdr.sec.level); + if (hdr.sec.level > 0) { + hdr.sec.key_id_mode = data_ind[30 + msdulen]; + memcpy(&hdr.sec.extended_src, &data_ind[31 + msdulen], 8); + hdr.sec.key_id = data_ind[39 + msdulen]; + } + hdr.source.mode = data_ind[0]; + dev_dbg(&priv->spi->dev, "srcAddrMode: %#03x\n", hdr.source.mode); + hdr.source.pan_id = *(u16 *)&data_ind[1]; + dev_dbg(&priv->spi->dev, "srcPanId: %#06x\n", hdr.source.pan_id); + memcpy(&hdr.source.extended_addr, &data_ind[3], 8); + hdr.dest.mode = data_ind[11]; + dev_dbg(&priv->spi->dev, "dstAddrMode: %#03x\n", hdr.dest.mode); + hdr.dest.pan_id = *(u16 *)&data_ind[12]; + dev_dbg(&priv->spi->dev, "dstPanId: %#06x\n", hdr.dest.pan_id); + memcpy(&hdr.dest.extended_addr, &data_ind[14], 8); + + /* Fill in FC implicitly */ + hdr.fc.type = 1; /* Data frame */ + if (hdr.sec.level) + hdr.fc.security_enabled = 1; + else + hdr.fc.security_enabled = 0; + if (data_ind[1] != data_ind[12] || data_ind[2] != data_ind[13]) + hdr.fc.intra_pan = 1; + else + hdr.fc.intra_pan = 0; + hdr.fc.dest_addr_mode = hdr.dest.mode; + hdr.fc.source_addr_mode = hdr.source.mode; + + /* Add hdr to front of buffer */ + hlen = ieee802154_hdr_push(skb, &hdr); + + if (hlen < 0) { + dev_crit(&priv->spi->dev, "failed to push mac hdr onto skb!\n"); + kfree_skb(skb); + return hlen; + } + + skb_reset_mac_header(skb); + skb->mac_len = hlen; + +copy_payload: + /* Add <msdulen> bytes of space to the back of the buffer */ + /* Copy msdu to skb */ + memcpy(skb_put(skb, msdulen), &data_ind[29], msdulen); + + ieee802154_rx_irqsafe(hw, skb, mpdulinkquality); + return 0; +} + +/** + * ca8210_net_rx() - Acts upon received SAP commands relevant to the network + * driver + * @hw: ieee802154_hw that command was received by + * @command: Octet array of received command + * @len: length of the received command + * + * Called by the spi driver whenever a SAP command is received, this function + * will ascertain whether the command is of interest to the network driver and + * take necessary action. + * + * Return: 0 or linux error code + */ +static int ca8210_net_rx(struct ieee802154_hw *hw, u8 *command, size_t len) +{ + struct ca8210_priv *priv = hw->priv; + unsigned long flags; + u8 status; + + dev_dbg(&priv->spi->dev, "ca8210_net_rx(), CmdID = %d\n", command[0]); + + if (command[0] == SPI_MCPS_DATA_INDICATION) { + /* Received data */ + spin_lock_irqsave(&priv->lock, flags); + if (command[26] == priv->last_dsn) { + dev_dbg( + &priv->spi->dev, + "DSN %d resend received, ignoring...\n", + command[26] + ); + spin_unlock_irqrestore(&priv->lock, flags); + return 0; + } + priv->last_dsn = command[26]; + spin_unlock_irqrestore(&priv->lock, flags); + return ca8210_skb_rx(hw, len - 2, command + 2); + } else if (command[0] == SPI_MCPS_DATA_CONFIRM) { + status = command[3]; + if (priv->async_tx_pending) { + return ca8210_async_xmit_complete( + hw, + command[2], + status + ); + } + } + + return 0; +} + +/** + * ca8210_skb_tx() - Transmits a given socket buffer using the ca8210 + * @skb: Socket buffer to transmit + * @msduhandle: Data identifier to pass to the 802.15.4 MAC + * @priv: Pointer to private data section of target ca8210 + * + * Return: 0 or linux error code + */ +static int ca8210_skb_tx( + struct sk_buff *skb, + u8 msduhandle, + struct ca8210_priv *priv +) +{ + int status; + struct ieee802154_hdr header = { 0 }; + struct secspec secspec; + unsigned int mac_len; + + dev_dbg(&priv->spi->dev, "ca8210_skb_tx() called\n"); + + /* Get addressing info from skb - ieee802154 layer creates a full + * packet + */ + mac_len = ieee802154_hdr_peek_addrs(skb, &header); + + secspec.security_level = header.sec.level; + secspec.key_id_mode = header.sec.key_id_mode; + if (secspec.key_id_mode == 2) + memcpy(secspec.key_source, &header.sec.short_src, 4); + else if (secspec.key_id_mode == 3) + memcpy(secspec.key_source, &header.sec.extended_src, 8); + secspec.key_index = header.sec.key_id; + + /* Pass to Cascoda API */ + status = mcps_data_request( + header.source.mode, + header.dest.mode, + header.dest.pan_id, + (union macaddr *)&header.dest.extended_addr, + skb->len - mac_len, + &skb->data[mac_len], + msduhandle, + header.fc.ack_request, + &secspec, + priv->spi + ); + return link_to_linux_err(status); +} + +/** + * ca8210_start() - Starts the network driver + * @hw: ieee802154_hw of ca8210 being started + * + * Return: 0 or linux error code + */ +static int ca8210_start(struct ieee802154_hw *hw) +{ + int status; + u8 rx_on_when_idle; + u8 lqi_threshold = 0; + struct ca8210_priv *priv = hw->priv; + + priv->last_dsn = -1; + /* Turn receiver on when idle for now just to test rx */ + rx_on_when_idle = 1; + status = mlme_set_request_sync( + MAC_RX_ON_WHEN_IDLE, + 0, + 1, + &rx_on_when_idle, + priv->spi + ); + if (status) { + dev_crit( + &priv->spi->dev, + "Setting rx_on_when_idle failed, status = %d\n", + status + ); + return link_to_linux_err(status); + } + status = hwme_set_request_sync( + HWME_LQILIMIT, + 1, + &lqi_threshold, + priv->spi + ); + if (status) { + dev_crit( + &priv->spi->dev, + "Setting lqilimit failed, status = %d\n", + status + ); + return link_to_linux_err(status); + } + + return 0; +} + +/** + * ca8210_stop() - Stops the network driver + * @hw: ieee802154_hw of ca8210 being stopped + * + * Return: 0 or linux error code + */ +static void ca8210_stop(struct ieee802154_hw *hw) +{ +} + +/** + * ca8210_xmit_async() - Asynchronously transmits a given socket buffer using + * the ca8210 + * @hw: ieee802154_hw of ca8210 to transmit from + * @skb: Socket buffer to transmit + * + * Return: 0 or linux error code + */ +static int ca8210_xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb) +{ + struct ca8210_priv *priv = hw->priv; + int status; + + dev_dbg(&priv->spi->dev, "calling ca8210_xmit_async()\n"); + + priv->tx_skb = skb; + priv->async_tx_pending = true; + status = ca8210_skb_tx(skb, priv->nextmsduhandle, priv); + return status; +} + +/** + * ca8210_get_ed() - Returns the measured energy on the current channel at this + * instant in time + * @hw: ieee802154_hw of target ca8210 + * @level: Measured Energy Detect level + * + * Return: 0 or linux error code + */ +static int ca8210_get_ed(struct ieee802154_hw *hw, u8 *level) +{ + u8 lenvar; + struct ca8210_priv *priv = hw->priv; + + return link_to_linux_err( + hwme_get_request_sync(HWME_EDVALUE, &lenvar, level, priv->spi) + ); +} + +/** + * ca8210_set_channel() - Sets the current operating 802.15.4 channel of the + * ca8210 + * @hw: ieee802154_hw of target ca8210 + * @page: Channel page to set + * @channel: Channel number to set + * + * Return: 0 or linux error code + */ +static int ca8210_set_channel( + struct ieee802154_hw *hw, + u8 page, + u8 channel +) +{ + u8 status; + struct ca8210_priv *priv = hw->priv; + + status = mlme_set_request_sync( + PHY_CURRENT_CHANNEL, + 0, + 1, + &channel, + priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting channel, MLME-SET.confirm status = %d\n", + status + ); + } + return link_to_linux_err(status); +} + +/** + * ca8210_set_hw_addr_filt() - Sets the address filtering parameters of the + * ca8210 + * @hw: ieee802154_hw of target ca8210 + * @filt: Filtering parameters + * @changed: Bitmap representing which parameters to change + * + * Effectively just sets the actual addressing information identifying this node + * as all filtering is performed by the ca8210 as detailed in the IEEE 802.15.4 + * 2006 specification. + * + * Return: 0 or linux error code + */ +static int ca8210_set_hw_addr_filt( + struct ieee802154_hw *hw, + struct ieee802154_hw_addr_filt *filt, + unsigned long changed +) +{ + u8 status = 0; + struct ca8210_priv *priv = hw->priv; + + if (changed & IEEE802154_AFILT_PANID_CHANGED) { + status = mlme_set_request_sync( + MAC_PAN_ID, + 0, + 2, + &filt->pan_id, priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting pan id, MLME-SET.confirm status = %d", + status + ); + return link_to_linux_err(status); + } + } + if (changed & IEEE802154_AFILT_SADDR_CHANGED) { + status = mlme_set_request_sync( + MAC_SHORT_ADDRESS, + 0, + 2, + &filt->short_addr, priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting short address, MLME-SET.confirm status = %d", + status + ); + return link_to_linux_err(status); + } + } + if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { + status = mlme_set_request_sync( + NS_IEEE_ADDRESS, + 0, + 8, + &filt->ieee_addr, + priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting ieee address, MLME-SET.confirm status = %d", + status + ); + return link_to_linux_err(status); + } + } + /* TODO: Should use MLME_START to set coord bit? */ + return 0; +} + +/** + * ca8210_set_tx_power() - Sets the transmit power of the ca8210 + * @hw: ieee802154_hw of target ca8210 + * @mbm: Transmit power in mBm (dBm*100) + * + * Return: 0 or linux error code + */ +static int ca8210_set_tx_power(struct ieee802154_hw *hw, s32 mbm) +{ + struct ca8210_priv *priv = hw->priv; + + mbm /= 100; + return link_to_linux_err( + mlme_set_request_sync(PHY_TRANSMIT_POWER, 0, 1, &mbm, priv->spi) + ); +} + +/** + * ca8210_set_cca_mode() - Sets the clear channel assessment mode of the ca8210 + * @hw: ieee802154_hw of target ca8210 + * @cca: CCA mode to set + * + * Return: 0 or linux error code + */ +static int ca8210_set_cca_mode( + struct ieee802154_hw *hw, + const struct wpan_phy_cca *cca +) +{ + u8 status; + u8 cca_mode; + struct ca8210_priv *priv = hw->priv; + + cca_mode = cca->mode & 3; + if (cca_mode == 3 && cca->opt == NL802154_CCA_OPT_ENERGY_CARRIER_OR) { + /* cca_mode 0 == CS OR ED, 3 == CS AND ED */ + cca_mode = 0; + } + status = mlme_set_request_sync( + PHY_CCA_MODE, + 0, + 1, + &cca_mode, + priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting cca mode, MLME-SET.confirm status = %d", + status + ); + } + return link_to_linux_err(status); +} + +/** + * ca8210_set_cca_ed_level() - Sets the CCA ED level of the ca8210 + * @hw: ieee802154_hw of target ca8210 + * @level: ED level to set (in mbm) + * + * Sets the minimum threshold of measured energy above which the ca8210 will + * back off and retry a transmission. + * + * Return: 0 or linux error code + */ +static int ca8210_set_cca_ed_level(struct ieee802154_hw *hw, s32 level) +{ + u8 status; + u8 ed_threshold = (level / 100) * 2 + 256; + struct ca8210_priv *priv = hw->priv; + + status = hwme_set_request_sync( + HWME_EDTHRESHOLD, + 1, + &ed_threshold, + priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting ed threshold, HWME-SET.confirm status = %d", + status + ); + } + return link_to_linux_err(status); +} + +/** + * ca8210_set_csma_params() - Sets the CSMA parameters of the ca8210 + * @hw: ieee802154_hw of target ca8210 + * @min_be: Minimum backoff exponent when backing off a transmission + * @max_be: Maximum backoff exponent when backing off a transmission + * @retries: Number of times to retry after backing off + * + * Return: 0 or linux error code + */ +static int ca8210_set_csma_params( + struct ieee802154_hw *hw, + u8 min_be, + u8 max_be, + u8 retries +) +{ + u8 status; + struct ca8210_priv *priv = hw->priv; + + status = mlme_set_request_sync(MAC_MIN_BE, 0, 1, &min_be, priv->spi); + if (status) { + dev_err( + &priv->spi->dev, + "error setting min be, MLME-SET.confirm status = %d", + status + ); + return link_to_linux_err(status); + } + status = mlme_set_request_sync(MAC_MAX_BE, 0, 1, &max_be, priv->spi); + if (status) { + dev_err( + &priv->spi->dev, + "error setting max be, MLME-SET.confirm status = %d", + status + ); + return link_to_linux_err(status); + } + status = mlme_set_request_sync( + MAC_MAX_CSMA_BACKOFFS, + 0, + 1, + &retries, + priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting max csma backoffs, MLME-SET.confirm status = %d", + status + ); + } + return link_to_linux_err(status); +} + +/** + * ca8210_set_frame_retries() - Sets the maximum frame retries of the ca8210 + * @hw: ieee802154_hw of target ca8210 + * @retries: Number of retries + * + * Sets the number of times to retry a transmission if no acknowledgment was + * was received from the other end when one was requested. + * + * Return: 0 or linux error code + */ +static int ca8210_set_frame_retries(struct ieee802154_hw *hw, s8 retries) +{ + u8 status; + struct ca8210_priv *priv = hw->priv; + + status = mlme_set_request_sync( + MAC_MAX_FRAME_RETRIES, + 0, + 1, + &retries, + priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting frame retries, MLME-SET.confirm status = %d", + status + ); + } + return link_to_linux_err(status); +} + +static int ca8210_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) +{ + u8 status; + struct ca8210_priv *priv = hw->priv; + + status = mlme_set_request_sync( + MAC_PROMISCUOUS_MODE, + 0, + 1, + (const void*)&on, + priv->spi + ); + if (status) { + dev_err( + &priv->spi->dev, + "error setting promiscuous mode, MLME-SET.confirm status = %d", + status + ); + } else { + priv->promiscuous = on; + } + return link_to_linux_err(status); +} + +static const struct ieee802154_ops ca8210_phy_ops = { + .start = ca8210_start, + .stop = ca8210_stop, + .xmit_async = ca8210_xmit_async, + .ed = ca8210_get_ed, + .set_channel = ca8210_set_channel, + .set_hw_addr_filt = ca8210_set_hw_addr_filt, + .set_txpower = ca8210_set_tx_power, + .set_cca_mode = ca8210_set_cca_mode, + .set_cca_ed_level = ca8210_set_cca_ed_level, + .set_csma_params = ca8210_set_csma_params, + .set_frame_retries = ca8210_set_frame_retries, + .set_promiscuous_mode = ca8210_set_promiscuous_mode +}; + +/* Test/EVBME Interface */ + +/** + * ca8210_test_int_open() - Opens the test interface to the userspace + * @inodp: inode representation of file interface + * @filp: file interface + * + * Return: 0 or linux error code + */ +static int ca8210_test_int_open(struct inode *inodp, struct file *filp) +{ + struct ca8210_priv *priv = inodp->i_private; + + filp->private_data = priv; + return 0; +} + +/** + * ca8210_test_check_upstream() - Checks a command received from the upstream + * testing interface for required action + * @buf: Buffer containing command to check + * @device_ref: Nondescript pointer to target device + * + * Return: 0 or linux error code + */ +static int ca8210_test_check_upstream(u8 *buf, void *device_ref) +{ + int ret; + u8 response[CA8210_SPI_BUF_SIZE]; + + if (buf[0] == SPI_MLME_SET_REQUEST) { + ret = tdme_checkpibattribute(buf[2], buf[4], buf + 5); + if (ret) { + response[0] = SPI_MLME_SET_CONFIRM; + response[1] = 3; + response[2] = MAC_INVALID_PARAMETER; + response[3] = buf[2]; + response[4] = buf[3]; + if (cascoda_api_upstream) + cascoda_api_upstream(response, 5, device_ref); + return ret; + } + } + if (buf[0] == SPI_MLME_ASSOCIATE_REQUEST) { + return tdme_channelinit(buf[2], device_ref); + } else if (buf[0] == SPI_MLME_START_REQUEST) { + return tdme_channelinit(buf[4], device_ref); + } else if ( + (buf[0] == SPI_MLME_SET_REQUEST) && + (buf[2] == PHY_CURRENT_CHANNEL) + ) { + return tdme_channelinit(buf[5], device_ref); + } else if ( + (buf[0] == SPI_TDME_SET_REQUEST) && + (buf[2] == TDME_CHANNEL) + ) { + return tdme_channelinit(buf[4], device_ref); + } else if ( + (CA8210_MAC_WORKAROUNDS) && + (buf[0] == SPI_MLME_RESET_REQUEST) && + (buf[2] == 1) + ) { + /* reset COORD Bit for Channel Filtering as Coordinator */ + return tdme_setsfr_request_sync( + 0, + CA8210_SFR_MACCON, + 0, + device_ref + ); + } + return 0; +} /* End of EVBMECheckSerialCommand() */ + +/** + * ca8210_test_int_user_write() - Called by a process in userspace to send a + * message to the ca8210 drivers + * @filp: file interface + * @in_buf: Buffer containing message to write + * @len: length of message + * @off: file offset + * + * Return: 0 or linux error code + */ +static ssize_t ca8210_test_int_user_write( + struct file *filp, + const char __user *in_buf, + size_t len, + loff_t *off +) +{ + int ret; + struct ca8210_priv *priv = filp->private_data; + u8 command[CA8210_SPI_BUF_SIZE]; + + if (len > CA8210_SPI_BUF_SIZE) { + dev_warn( + &priv->spi->dev, + "userspace requested erroneously long write (%zu)\n", + len + ); + return -EMSGSIZE; + } + + ret = copy_from_user(command, in_buf, len); + if (ret) { + dev_err( + &priv->spi->dev, + "%d bytes could not be copied from userspace\n", + ret + ); + return -EIO; + } + + ret = ca8210_test_check_upstream(command, priv->spi); + if (ret == 0) { + ret = ca8210_spi_exchange( + command, + command[1] + 2, + NULL, + priv->spi + ); + if (ret < 0) { + /* effectively 0 bytes were written successfully */ + dev_err( + &priv->spi->dev, + "spi exchange failed\n" + ); + return ret; + } + if (command[0] & SPI_SYN) + priv->sync_down++; + } + + return len; +} + +/** + * ca8210_test_int_user_read() - Called by a process in userspace to read a + * message from the ca8210 drivers + * @filp: file interface + * @buf: Buffer to write message to + * @len: length of message to read (ignored) + * @offp: file offset + * + * If the O_NONBLOCK flag was set when opening the file then this function will + * not block, i.e. it will return if the fifo is empty. Otherwise the function + * will block, i.e. wait until new data arrives. + * + * Return: number of bytes read + */ +static ssize_t ca8210_test_int_user_read( + struct file *filp, + char __user *buf, + size_t len, + loff_t *offp +) +{ + int i, cmdlen; + struct ca8210_priv *priv = filp->private_data; + unsigned char *fifo_buffer; + unsigned long bytes_not_copied; + + if (filp->f_flags & O_NONBLOCK) { + /* Non-blocking mode */ + if (kfifo_is_empty(&priv->test.up_fifo)) + return 0; + } else { + /* Blocking mode */ + wait_event_interruptible( + priv->test.readq, + !kfifo_is_empty(&priv->test.up_fifo) + ); + } + + if (kfifo_out(&priv->test.up_fifo, &fifo_buffer, 4) != 4) { + dev_err( + &priv->spi->dev, + "test_interface: Wrong number of elements popped from upstream fifo\n" + ); + return 0; + } + cmdlen = fifo_buffer[1]; + bytes_not_copied = cmdlen + 2; + + bytes_not_copied = copy_to_user(buf, fifo_buffer, bytes_not_copied); + if (bytes_not_copied > 0) { + dev_err( + &priv->spi->dev, + "%lu bytes could not be copied to user space!\n", + bytes_not_copied + ); + } + + dev_dbg(&priv->spi->dev, "test_interface: Cmd len = %d\n", cmdlen); + + dev_dbg(&priv->spi->dev, "test_interface: Read\n"); + for (i = 0; i < cmdlen + 2; i++) + dev_dbg(&priv->spi->dev, "%#03x\n", fifo_buffer[i]); + + kfree(fifo_buffer); + + return cmdlen + 2; +} + +/** + * ca8210_test_int_ioctl() - Called by a process in userspace to enact an + * arbitrary action + * @filp: file interface + * @ioctl_num: which action to enact + * @ioctl_param: arbitrary parameter for the action + * + * Return: status + */ +static long ca8210_test_int_ioctl( + struct file *filp, + unsigned int ioctl_num, + unsigned long ioctl_param +) +{ + struct ca8210_priv *priv = filp->private_data; + + switch (ioctl_num) { + case CA8210_IOCTL_HARD_RESET: + ca8210_reset_send(priv->spi, ioctl_param); + break; + default: + break; + } + return 0; +} + +/** + * ca8210_test_int_poll() - Called by a process in userspace to determine which + * actions are currently possible for the file + * @filp: file interface + * @ptable: poll table + * + * Return: set of poll return flags + */ +static unsigned int ca8210_test_int_poll( + struct file *filp, + struct poll_table_struct *ptable +) +{ + unsigned int return_flags = 0; + struct ca8210_priv *priv = filp->private_data; + + poll_wait(filp, &priv->test.readq, ptable); + if (!kfifo_is_empty(&priv->test.up_fifo)) + return_flags |= (POLLIN | POLLRDNORM); + if (wait_event_interruptible( + priv->test.readq, + !kfifo_is_empty(&priv->test.up_fifo))) { + return POLLERR; + } + return return_flags; +} + +static const struct file_operations test_int_fops = { + .read = ca8210_test_int_user_read, + .write = ca8210_test_int_user_write, + .open = ca8210_test_int_open, + .release = NULL, + .unlocked_ioctl = ca8210_test_int_ioctl, + .poll = ca8210_test_int_poll +}; + +/* Init/Deinit */ + +/** + * ca8210_get_platform_data() - Populate a ca8210_platform_data object + * @spi_device: Pointer to ca8210 spi device object to get data for + * @pdata: Pointer to ca8210_platform_data object to populate + * + * Return: 0 or linux error code + */ +static int ca8210_get_platform_data( + struct spi_device *spi_device, + struct ca8210_platform_data *pdata +) +{ + int ret = 0; + + if (!spi_device->dev.of_node) + return -EINVAL; + + pdata->extclockenable = of_property_read_bool( + spi_device->dev.of_node, + "extclock-enable" + ); + if (pdata->extclockenable) { + ret = of_property_read_u32( + spi_device->dev.of_node, + "extclock-freq", + &pdata->extclockfreq + ); + if (ret < 0) + return ret; + + ret = of_property_read_u32( + spi_device->dev.of_node, + "extclock-gpio", + &pdata->extclockgpio + ); + } + + return ret; +} + +/** + * ca8210_config_extern_clk() - Configure the external clock provided by the + * ca8210 + * @pdata: Pointer to ca8210_platform_data containing clock parameters + * @spi: Pointer to target ca8210 spi device + * @on: True to turn the clock on, false to turn off + * + * The external clock is configured with a frequency and output pin taken from + * the platform data. + * + * Return: 0 or linux error code + */ +static int ca8210_config_extern_clk( + struct ca8210_platform_data *pdata, + struct spi_device *spi, + bool on +) +{ + u8 clkparam[2]; + + if (on) { + dev_info(&spi->dev, "Switching external clock on\n"); + switch (pdata->extclockfreq) { + case SIXTEEN_MHZ: + clkparam[0] = 1; + break; + case EIGHT_MHZ: + clkparam[0] = 2; + break; + case FOUR_MHZ: + clkparam[0] = 3; + break; + case TWO_MHZ: + clkparam[0] = 4; + break; + case ONE_MHZ: + clkparam[0] = 5; + break; + default: + dev_crit(&spi->dev, "Invalid extclock-freq\n"); + return -EINVAL; + } + clkparam[1] = pdata->extclockgpio; + } else { + dev_info(&spi->dev, "Switching external clock off\n"); + clkparam[0] = 0; /* off */ + clkparam[1] = 0; + } + return link_to_linux_err( + hwme_set_request_sync(HWME_SYSCLKOUT, 2, clkparam, spi) + ); +} + +/** + * ca8210_register_ext_clock() - Register ca8210's external clock with kernel + * @spi: Pointer to target ca8210 spi device + * + * Return: 0 or linux error code + */ +static int ca8210_register_ext_clock(struct spi_device *spi) +{ + struct device_node *np = spi->dev.of_node; + struct ca8210_priv *priv = spi_get_drvdata(spi); + struct ca8210_platform_data *pdata = spi->dev.platform_data; + int ret = 0; + + if (!np) + return -EFAULT; + + priv->clk = clk_register_fixed_rate( + &spi->dev, + np->name, + NULL, + 0, + pdata->extclockfreq + ); + + if (IS_ERR(priv->clk)) { + dev_crit(&spi->dev, "Failed to register external clk\n"); + return PTR_ERR(priv->clk); + } + ret = of_clk_add_provider(np, of_clk_src_simple_get, priv->clk); + if (ret) { + clk_unregister(priv->clk); + dev_crit( + &spi->dev, + "Failed to register external clock as clock provider\n" + ); + } else { + dev_info(&spi->dev, "External clock set as clock provider\n"); + } + + return ret; +} + +/** + * ca8210_unregister_ext_clock() - Unregister ca8210's external clock with + * kernel + * @spi: Pointer to target ca8210 spi device + */ +static void ca8210_unregister_ext_clock(struct spi_device *spi) +{ + struct ca8210_priv *priv = spi_get_drvdata(spi); + + if (!priv->clk) + return + + of_clk_del_provider(spi->dev.of_node); + clk_unregister(priv->clk); + dev_info(&spi->dev, "External clock unregistered\n"); +} + +/** + * ca8210_reset_init() - Initialise the reset input to the ca8210 + * @spi: Pointer to target ca8210 spi device + * + * Return: 0 or linux error code + */ +static int ca8210_reset_init(struct spi_device *spi) +{ + int ret; + struct ca8210_platform_data *pdata = spi->dev.platform_data; + + pdata->gpio_reset = of_get_named_gpio( + spi->dev.of_node, + "reset-gpio", + 0 + ); + + ret = gpio_direction_output(pdata->gpio_reset, 1); + if (ret < 0) { + dev_crit( + &spi->dev, + "Reset GPIO %d did not set to output mode\n", + pdata->gpio_reset + ); + } + + return ret; +} + +/** + * ca8210_interrupt_init() - Initialise the irq output from the ca8210 + * @spi: Pointer to target ca8210 spi device + * + * Return: 0 or linux error code + */ +static int ca8210_interrupt_init(struct spi_device *spi) +{ + int ret; + struct ca8210_platform_data *pdata = spi->dev.platform_data; + + pdata->gpio_irq = of_get_named_gpio( + spi->dev.of_node, + "irq-gpio", + 0 + ); + + pdata->irq_id = gpio_to_irq(pdata->gpio_irq); + if (pdata->irq_id < 0) { + dev_crit( + &spi->dev, + "Could not get irq for gpio pin %d\n", + pdata->gpio_irq + ); + gpio_free(pdata->gpio_irq); + return pdata->irq_id; + } + + ret = request_irq( + pdata->irq_id, + ca8210_interrupt_handler, + IRQF_TRIGGER_FALLING, + "ca8210-irq", + spi_get_drvdata(spi) + ); + if (ret) { + dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id); + gpio_unexport(pdata->gpio_irq); + gpio_free(pdata->gpio_irq); + } + + return ret; +} + +/** + * ca8210_dev_com_init() - Initialise the spi communication component + * @priv: Pointer to private data structure + * + * Return: 0 or linux error code + */ +static int ca8210_dev_com_init(struct ca8210_priv *priv) +{ + priv->mlme_workqueue = alloc_ordered_workqueue( + "MLME work queue", + WQ_UNBOUND + ); + if (!priv->mlme_workqueue) { + dev_crit(&priv->spi->dev, "alloc of mlme_workqueue failed!\n"); + return -ENOMEM; + } + + priv->irq_workqueue = alloc_ordered_workqueue( + "ca8210 irq worker", + WQ_UNBOUND + ); + if (!priv->irq_workqueue) { + dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n"); + return -ENOMEM; + } + + return 0; +} + +/** + * ca8210_dev_com_clear() - Deinitialise the spi communication component + * @priv: Pointer to private data structure + */ +static void ca8210_dev_com_clear(struct ca8210_priv *priv) +{ + flush_workqueue(priv->mlme_workqueue); + destroy_workqueue(priv->mlme_workqueue); + flush_workqueue(priv->irq_workqueue); + destroy_workqueue(priv->irq_workqueue); +} + +#define CA8210_MAX_TX_POWERS (9) +static const s32 ca8210_tx_powers[CA8210_MAX_TX_POWERS] = { + 800, 700, 600, 500, 400, 300, 200, 100, 0 +}; + +#define CA8210_MAX_ED_LEVELS (21) +static const s32 ca8210_ed_levels[CA8210_MAX_ED_LEVELS] = { + -10300, -10250, -10200, -10150, -10100, -10050, -10000, -9950, -9900, + -9850, -9800, -9750, -9700, -9650, -9600, -9550, -9500, -9450, -9400, + -9350, -9300 +}; + +/** + * ca8210_hw_setup() - Populate the ieee802154_hw phy attributes with the + * ca8210's defaults + * @ca8210_hw: Pointer to ieee802154_hw to populate + */ +static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw) +{ + /* Support channels 11-26 */ + ca8210_hw->phy->supported.channels[0] = CA8210_VALID_CHANNELS; + ca8210_hw->phy->supported.tx_powers_size = CA8210_MAX_TX_POWERS; + ca8210_hw->phy->supported.tx_powers = ca8210_tx_powers; + ca8210_hw->phy->supported.cca_ed_levels_size = CA8210_MAX_ED_LEVELS; + ca8210_hw->phy->supported.cca_ed_levels = ca8210_ed_levels; + ca8210_hw->phy->current_channel = 18; + ca8210_hw->phy->current_page = 0; + ca8210_hw->phy->transmit_power = 800; + ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER; + ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND; + ca8210_hw->phy->cca_ed_level = -9800; + ca8210_hw->phy->symbol_duration = 16; + ca8210_hw->phy->lifs_period = 40; + ca8210_hw->phy->sifs_period = 12; + ca8210_hw->flags = + IEEE802154_HW_AFILT | + IEEE802154_HW_OMIT_CKSUM | + IEEE802154_HW_FRAME_RETRIES | + IEEE802154_HW_PROMISCUOUS | + IEEE802154_HW_CSMA_PARAMS; + ca8210_hw->phy->flags = + WPAN_PHY_FLAG_TXPOWER | + WPAN_PHY_FLAG_CCA_ED_LEVEL | + WPAN_PHY_FLAG_CCA_MODE; +} + +/** + * ca8210_test_interface_init() - Initialise the test file interface + * @priv: Pointer to private data structure + * + * Provided as an alternative to the standard linux network interface, the test + * interface exposes a file in the filesystem (ca8210_test) that allows + * 802.15.4 SAP Commands and Cascoda EVBME commands to be sent directly to + * the stack. + * + * Return: 0 or linux error code + */ +static int ca8210_test_interface_init(struct ca8210_priv *priv) +{ + struct ca8210_test *test = &priv->test; + char node_name[32]; + + snprintf( + node_name, + sizeof(node_name), + "ca8210@%d_%d", + priv->spi->master->bus_num, + priv->spi->chip_select + ); + + test->ca8210_dfs_spi_int = debugfs_create_file( + node_name, + 0600, /* S_IRUSR | S_IWUSR */ + NULL, + priv, + &test_int_fops + ); + if (IS_ERR(test->ca8210_dfs_spi_int)) { + dev_err( + &priv->spi->dev, + "Error %ld when creating debugfs node\n", + PTR_ERR(test->ca8210_dfs_spi_int) + ); + return PTR_ERR(test->ca8210_dfs_spi_int); + } + debugfs_create_symlink("ca8210", NULL, node_name); + init_waitqueue_head(&test->readq); + return kfifo_alloc( + &test->up_fifo, + CA8210_TEST_INT_FIFO_SIZE, + GFP_KERNEL + ); +} + +/** + * ca8210_test_interface_clear() - Deinitialise the test file interface + * @priv: Pointer to private data structure + */ +static void ca8210_test_interface_clear(struct ca8210_priv *priv) +{ + struct ca8210_test *test = &priv->test; + + if (!IS_ERR(test->ca8210_dfs_spi_int)) + debugfs_remove(test->ca8210_dfs_spi_int); + kfifo_free(&test->up_fifo); + dev_info(&priv->spi->dev, "Test interface removed\n"); +} + +/** + * ca8210_remove() - Shut down a ca8210 upon being disconnected + * @priv: Pointer to private data structure + * + * Return: 0 or linux error code + */ +static int ca8210_remove(struct spi_device *spi_device) +{ + struct ca8210_priv *priv; + struct ca8210_platform_data *pdata; + + dev_info(&spi_device->dev, "Removing ca8210\n"); + + pdata = spi_device->dev.platform_data; + if (pdata) { + if (pdata->extclockenable) { + ca8210_unregister_ext_clock(spi_device); + ca8210_config_extern_clk(pdata, spi_device, 0); + } + free_irq(pdata->irq_id, spi_device->dev.driver_data); + kfree(pdata); + spi_device->dev.platform_data = NULL; + } + /* get spi_device private data */ + priv = spi_get_drvdata(spi_device); + if (priv) { + dev_info( + &spi_device->dev, + "sync_down = %d, sync_up = %d\n", + priv->sync_down, + priv->sync_up + ); + ca8210_dev_com_clear(spi_device->dev.driver_data); + if (priv->hw) { + if (priv->hw_registered) + ieee802154_unregister_hw(priv->hw); + ieee802154_free_hw(priv->hw); + priv->hw = NULL; + dev_info( + &spi_device->dev, + "Unregistered & freed ieee802154_hw.\n" + ); + } + if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) + ca8210_test_interface_clear(priv); + } + + return 0; +} + +/** + * ca8210_probe() - Set up a connected ca8210 upon being detected by the system + * @priv: Pointer to private data structure + * + * Return: 0 or linux error code + */ +static int ca8210_probe(struct spi_device *spi_device) +{ + struct ca8210_priv *priv; + struct ieee802154_hw *hw; + struct ca8210_platform_data *pdata; + int ret; + + dev_info(&spi_device->dev, "Inserting ca8210\n"); + + /* allocate ieee802154_hw and private data */ + hw = ieee802154_alloc_hw(sizeof(struct ca8210_priv), &ca8210_phy_ops); + if (!hw) { + dev_crit(&spi_device->dev, "ieee802154_alloc_hw failed\n"); + ret = -ENOMEM; + goto error; + } + + priv = hw->priv; + priv->hw = hw; + priv->spi = spi_device; + hw->parent = &spi_device->dev; + spin_lock_init(&priv->lock); + priv->async_tx_pending = false; + priv->hw_registered = false; + priv->sync_up = 0; + priv->sync_down = 0; + priv->promiscuous = false; + priv->retries = 0; + init_completion(&priv->ca8210_is_awake); + init_completion(&priv->spi_transfer_complete); + init_completion(&priv->sync_exchange_complete); + spi_set_drvdata(priv->spi, priv); + if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) { + cascoda_api_upstream = ca8210_test_int_driver_write; + ca8210_test_interface_init(priv); + } else { + cascoda_api_upstream = NULL; + } + ca8210_hw_setup(hw); + ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); + + pdata = kmalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_crit( + &spi_device->dev, + "Could not allocate platform data\n" + ); + ret = -ENOMEM; + goto error; + } + + ret = ca8210_get_platform_data(priv->spi, pdata); + if (ret) { + dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n"); + goto error; + } + priv->spi->dev.platform_data = pdata; + + ret = ca8210_dev_com_init(priv); + if (ret) { + dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n"); + goto error; + } + ret = ca8210_reset_init(priv->spi); + if (ret) { + dev_crit(&spi_device->dev, "ca8210_reset_init failed\n"); + goto error; + } + + ret = ca8210_interrupt_init(priv->spi); + if (ret) { + dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n"); + goto error; + } + + msleep(100); + + ca8210_reset_send(priv->spi, 1); + + ret = tdme_chipinit(priv->spi); + if (ret) { + dev_crit(&spi_device->dev, "tdme_chipinit failed\n"); + goto error; + } + + if (pdata->extclockenable) { + ret = ca8210_config_extern_clk(pdata, priv->spi, 1); + if (ret) { + dev_crit( + &spi_device->dev, + "ca8210_config_extern_clk failed\n" + ); + goto error; + } + ret = ca8210_register_ext_clock(priv->spi); + if (ret) { + dev_crit( + &spi_device->dev, + "ca8210_register_ext_clock failed\n" + ); + goto error; + } + } + + ret = ieee802154_register_hw(hw); + if (ret) { + dev_crit(&spi_device->dev, "ieee802154_register_hw failed\n"); + goto error; + } + priv->hw_registered = true; + + return 0; +error: + msleep(100); /* wait for pending spi transfers to complete */ + ca8210_remove(spi_device); + return link_to_linux_err(ret); +} + +static const struct of_device_id ca8210_of_ids[] = { + {.compatible = "cascoda,ca8210", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ca8210_of_ids); + +static struct spi_driver ca8210_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ca8210_of_ids), + }, + .probe = ca8210_probe, + .remove = ca8210_remove +}; + +module_spi_driver(ca8210_spi_driver); + +MODULE_AUTHOR("Harry Morris <h.morris@cascoda.com>"); +MODULE_DESCRIPTION("CA-8210 SoftMAC driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION("1.0"); |