Merge branch 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - new driver for ICY, an Amiga Zorro card :)

 - axxia driver gained slave mode support, NXP driver gained ACPI

 - the slave EEPROM backend gained 16 bit address support

 - and lots of regular driver updates and reworks

* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
  i2c: tegra: Move suspend handling to NOIRQ phase
  i2c: imx: ACPI support for NXP i2c controller
  i2c: uniphier(-f): remove all dev_dbg()
  i2c: uniphier(-f): use devm_platform_ioremap_resource()
  i2c: slave-eeprom: Add comment about address handling
  i2c: exynos5: Remove IRQF_ONESHOT
  i2c: stm32f7: Make structure stm32f7_i2c_algo constant
  i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
  i2c-eeprom_slave: Add support for more eeprom models
  i2c: fsi: Add of_put_node() before break
  i2c: synquacer: Make synquacer_i2c_ops constant
  i2c: hix5hd2: Remove IRQF_ONESHOT
  i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
  watchdog: iTCO: Add support for Cannon Lake PCH iTCO
  i2c: iproc: Make bcm_iproc_i2c_quirks constant
  i2c: iproc: Add full name of devicetree node to adapter name
  i2c: piix4: Add ACPI support
  i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
  i2c: ocores: use request_any_context_irq() to register IRQ handler
  i2c: designware: Fix optional reset error handling
  ...

42 files changed, 795 insertions, 267 deletions

diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
index e9de3756752b..c9a6587fe4bb 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
@@ -1,7 +1,9 @@
 Broadcom BCM2835 I2C controller
 
 Required properties:
-- compatible : Should be "brcm,bcm2835-i2c".
+- compatible : Should be one of:
+	"brcm,bcm2711-i2c"
+	"brcm,bcm2835-i2c"
 - reg: Should contain register location and length.
 - interrupts: Should contain interrupt.
 - clocks : The clock feeding the I2C controller.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
index 3ee5e8f6ee01..3ee5e8f6ee01 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-emev2.txt b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt
index 5ed1ea1c7e14..5ed1ea1c7e14 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-emev2.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
index 202602e6e837..202602e6e837 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-riic.txt b/Documentation/devicetree/bindings/i2c/renesas,riic.txt
index e26fe3ad86a9..e26fe3ad86a9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-riic.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index 54f1286087e9..a8d193a74692 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7865,6 +7865,12 @@ S:	Maintained
 F:	drivers/mfd/lpc_ich.c
 F:	drivers/gpio/gpio-ich.c
 
+ICY I2C DRIVER
+M:	Max Staudt <max@enpas.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-icy.c
+
 IDE SUBSYSTEM
 M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-ide@vger.kernel.org
@@ -13791,7 +13797,7 @@ F:	drivers/clk/renesas/
 RENESAS EMEV2 I2C DRIVER
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
 S:	Supported
-F:	Documentation/devicetree/bindings/i2c/i2c-emev2.txt
+F:	Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt
 F:	drivers/i2c/busses/i2c-emev2.c
 
 RENESAS ETHERNET DRIVERS
@@ -13813,15 +13819,15 @@ F:	drivers/iio/adc/rcar-gyroadc.c
 RENESAS R-CAR I2C DRIVERS
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
 S:	Supported
-F:	Documentation/devicetree/bindings/i2c/i2c-rcar.txt
-F:	Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+F:	Documentation/devicetree/bindings/i2c/renesas,i2c.txt
+F:	Documentation/devicetree/bindings/i2c/renesas,iic.txt
 F:	drivers/i2c/busses/i2c-rcar.c
 F:	drivers/i2c/busses/i2c-sh_mobile.c
 
 RENESAS RIIC DRIVER
 M:	Chris Brandt <chris.brandt@renesas.com>
 S:	Supported
-F:	Documentation/devicetree/bindings/i2c/i2c-riic.txt
+F:	Documentation/devicetree/bindings/i2c/renesas,riic.txt
 F:	drivers/i2c/busses/i2c-riic.c
 
 RENESAS USB PHY DRIVER
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 7cd0c9ac71ea..71511ae2dfcd 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -160,11 +160,17 @@ static const struct apd_device_desc hip08_i2c_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 250000000,
 };
+
 static const struct apd_device_desc thunderx2_i2c_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 125000000,
 };
 
+static const struct apd_device_desc nxp_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 350000000,
+};
+
 static const struct apd_device_desc hip08_spi_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 250000000,
@@ -238,6 +244,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 	{ "HISI02A1", APD_ADDR(hip07_i2c_desc) },
 	{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
 	{ "HISI0173", APD_ADDR(hip08_spi_desc) },
+	{ "NXP0001", APD_ADDR(nxp_i2c_desc) },
 #endif
 	{ }
 };
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 98bccace8c1c..3d61c4fb4dec 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -978,10 +978,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
 {
 	int ret;
 
-	adv->i2c_cec = i2c_new_secondary_device(adv->i2c_main, "cec",
+	adv->i2c_cec = i2c_new_ancillary_device(adv->i2c_main, "cec",
 						ADV7511_CEC_I2C_ADDR_DEFAULT);
-	if (!adv->i2c_cec)
-		return -EINVAL;
+	if (IS_ERR(adv->i2c_cec))
+		return PTR_ERR(adv->i2c_cec);
 	i2c_set_clientdata(adv->i2c_cec, adv);
 
 	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
@@ -1162,20 +1162,20 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	adv7511_packet_disable(adv7511, 0xffff);
 
-	adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
+	adv7511->i2c_edid = i2c_new_ancillary_device(i2c, "edid",
 					ADV7511_EDID_I2C_ADDR_DEFAULT);
-	if (!adv7511->i2c_edid) {
-		ret = -EINVAL;
+	if (IS_ERR(adv7511->i2c_edid)) {
+		ret = PTR_ERR(adv7511->i2c_edid);
 		goto uninit_regulators;
 	}
 
 	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
 		     adv7511->i2c_edid->addr << 1);
 
-	adv7511->i2c_packet = i2c_new_secondary_device(i2c, "packet",
+	adv7511->i2c_packet = i2c_new_ancillary_device(i2c, "packet",
 					ADV7511_PACKET_I2C_ADDR_DEFAULT);
-	if (!adv7511->i2c_packet) {
-		ret = -EINVAL;
+	if (IS_ERR(adv7511->i2c_packet)) {
+		ret = PTR_ERR(adv7511->i2c_packet);
 		goto err_i2c_unregister_edid;
 	}
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5587215b8ddb..146ce40d8e0a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -429,6 +429,7 @@ config I2C_AXXIA
 	tristate "Axxia I2C controller"
 	depends on ARCH_AXXIA || COMPILE_TEST
 	default ARCH_AXXIA
+	select I2C_SLAVE
 	help
 	  Say yes if you want to support the I2C bus on Axxia platforms.
 
@@ -977,7 +978,7 @@ config I2C_SIRF
 	  will be called i2c-sirf.
 
 config I2C_SPRD
-	bool "Spreadtrum I2C interface"
+	tristate "Spreadtrum I2C interface"
 	depends on I2C=y && ARCH_SPRD
 	help
 	  If you say yes to this option, support will be included for the
@@ -1309,6 +1310,20 @@ config I2C_ELEKTOR
 	  This support is also available as a module.  If so, the module
 	  will be called i2c-elektor.
 
+config I2C_ICY
+	tristate "ICY Zorro card"
+	depends on ZORRO
+	select I2C_ALGOPCF
+	help
+	  This supports the PCF8584 Zorro bus I2C adapter, known as ICY.
+	  Say Y if you own such an adapter.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-icy.
+
+	  If you have a 2019 edition board with an LTC2990 sensor at address
+	  0x4c, loading the module 'ltc2990' is sufficient to enable it.
+
 config I2C_MLXCPLD
 	tristate "Mellanox I2C driver"
 	depends on X86_64
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 80c23895eaaf..3ab8aebc39c9 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_I2C_BCM_KONA)	+= i2c-bcm-kona.o
 obj-$(CONFIG_I2C_BRCMSTB)	+= i2c-brcmstb.o
 obj-$(CONFIG_I2C_CROS_EC_TUNNEL)	+= i2c-cros-ec-tunnel.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
+obj-$(CONFIG_I2C_ICY)		+= i2c-icy.o
 obj-$(CONFIG_I2C_MLXCPLD)	+= i2c-mlxcpld.o
 obj-$(CONFIG_I2C_OPAL)		+= i2c-opal.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index ff3142b15cab..0214daa913ff 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -77,6 +77,40 @@
 				 MST_STATUS_IP)
 #define MST_TX_BYTES_XFRD	0x50
 #define MST_RX_BYTES_XFRD	0x54
+#define SLV_ADDR_DEC_CTL	0x58
+#define   SLV_ADDR_DEC_GCE	BIT(0)  /* ACK to General Call Address from own master (loopback) */
+#define   SLV_ADDR_DEC_OGCE	BIT(1)  /* ACK to General Call Address from external masters */
+#define   SLV_ADDR_DEC_SA1E	BIT(2)  /* ACK to addr_1 enabled */
+#define   SLV_ADDR_DEC_SA1M	BIT(3)  /* 10-bit addressing for addr_1 enabled */
+#define   SLV_ADDR_DEC_SA2E	BIT(4)  /* ACK to addr_2 enabled */
+#define   SLV_ADDR_DEC_SA2M	BIT(5)  /* 10-bit addressing for addr_2 enabled */
+#define SLV_ADDR_1		0x5c
+#define SLV_ADDR_2		0x60
+#define SLV_RX_CTL		0x64
+#define   SLV_RX_ACSA1		BIT(0)  /* Generate ACK for writes to addr_1 */
+#define   SLV_RX_ACSA2		BIT(1)  /* Generate ACK for writes to addr_2 */
+#define   SLV_RX_ACGCA		BIT(2)  /* ACK data phase transfers to General Call Address */
+#define SLV_DATA		0x68
+#define SLV_RX_FIFO		0x6c
+#define   SLV_FIFO_DV1		BIT(0)  /* Data Valid for addr_1 */
+#define   SLV_FIFO_DV2		BIT(1)  /* Data Valid for addr_2 */
+#define   SLV_FIFO_AS		BIT(2)  /* (N)ACK Sent */
+#define   SLV_FIFO_TNAK		BIT(3)  /* Timeout NACK */
+#define   SLV_FIFO_STRC		BIT(4)  /* First byte after start condition received */
+#define   SLV_FIFO_RSC		BIT(5)  /* Repeated Start Condition */
+#define   SLV_FIFO_STPC		BIT(6)  /* Stop Condition */
+#define   SLV_FIFO_DV		(SLV_FIFO_DV1 | SLV_FIFO_DV2)
+#define SLV_INT_ENABLE		0x70
+#define SLV_INT_STATUS		0x74
+#define   SLV_STATUS_RFH	BIT(0)  /* FIFO service */
+#define   SLV_STATUS_WTC	BIT(1)  /* Write transfer complete */
+#define   SLV_STATUS_SRS1	BIT(2)  /* Slave read from addr 1 */
+#define   SLV_STATUS_SRRS1	BIT(3)  /* Repeated start from addr 1 */
+#define   SLV_STATUS_SRND1	BIT(4)  /* Read request not following start condition */
+#define   SLV_STATUS_SRC1	BIT(5)  /* Read canceled */
+#define   SLV_STATUS_SRAT1	BIT(6)  /* Slave Read timed out */
+#define   SLV_STATUS_SRDRE1	BIT(7)  /* Data written after timed out */
+#define SLV_READ_DUMMY		0x78
 #define SCL_HIGH_PERIOD		0x80
 #define SCL_LOW_PERIOD		0x84
 #define SPIKE_FLTR_LEN		0x88
@@ -111,6 +145,8 @@ struct axxia_i2c_dev {
 	struct clk *i2c_clk;
 	u32 bus_clk_rate;
 	bool last;
+	struct i2c_client *slave;
+	int irq;
 };
 
 static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask)
@@ -276,13 +312,65 @@ static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev)
 	return ret;
 }
 
+static void axxia_i2c_slv_fifo_event(struct axxia_i2c_dev *idev)
+{
+	u32 fifo_status = readl(idev->base + SLV_RX_FIFO);
+	u8 val;
+
+	dev_dbg(idev->dev, "slave irq fifo_status=0x%x\n", fifo_status);
+
+	if (fifo_status & SLV_FIFO_DV1) {
+		if (fifo_status & SLV_FIFO_STRC)
+			i2c_slave_event(idev->slave,
+					I2C_SLAVE_WRITE_REQUESTED, &val);
+
+		val = readl(idev->base + SLV_DATA);
+		i2c_slave_event(idev->slave, I2C_SLAVE_WRITE_RECEIVED, &val);
+	}
+	if (fifo_status & SLV_FIFO_STPC) {
+		readl(idev->base + SLV_DATA); /* dummy read */
+		i2c_slave_event(idev->slave, I2C_SLAVE_STOP, &val);
+	}
+	if (fifo_status & SLV_FIFO_RSC)
+		readl(idev->base + SLV_DATA); /* dummy read */
+}
+
+static irqreturn_t axxia_i2c_slv_isr(struct axxia_i2c_dev *idev)
+{
+	u32 status = readl(idev->base + SLV_INT_STATUS);
+	u8 val;
+
+	dev_dbg(idev->dev, "slave irq status=0x%x\n", status);
+
+	if (status & SLV_STATUS_RFH)
+		axxia_i2c_slv_fifo_event(idev);
+	if (status & SLV_STATUS_SRS1) {
+		i2c_slave_event(idev->slave, I2C_SLAVE_READ_REQUESTED, &val);
+		writel(val, idev->base + SLV_DATA);
+	}
+	if (status & SLV_STATUS_SRND1) {
+		i2c_slave_event(idev->slave, I2C_SLAVE_READ_PROCESSED, &val);
+		writel(val, idev->base + SLV_DATA);
+	}
+	if (status & SLV_STATUS_SRC1)
+		i2c_slave_event(idev->slave, I2C_SLAVE_STOP, &val);
+
+	writel(INT_SLV, idev->base + INTERRUPT_STATUS);
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
 {
 	struct axxia_i2c_dev *idev = _dev;
+	irqreturn_t ret = IRQ_NONE;
 	u32 status;
 
-	if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST))
-		return IRQ_NONE;
+	status = readl(idev->base + INTERRUPT_STATUS);
+
+	if (status & INT_SLV)
+		ret = axxia_i2c_slv_isr(idev);
+	if (!(status & INT_MST))
+		return ret;
 
 	/* Read interrupt status bits */
 	status = readl(idev->base + MST_INT_STATUS);
@@ -583,9 +671,58 @@ static u32 axxia_i2c_func(struct i2c_adapter *adap)
 	return caps;
 }
 
+static int axxia_i2c_reg_slave(struct i2c_client *slave)
+{
+	struct axxia_i2c_dev *idev = i2c_get_adapdata(slave->adapter);
+	u32 slv_int_mask = SLV_STATUS_RFH;
+	u32 dec_ctl;
+
+	if (idev->slave)
+		return -EBUSY;
+
+	idev->slave = slave;
+
+	/* Enable slave mode as well */
+	writel(GLOBAL_MST_EN | GLOBAL_SLV_EN, idev->base + GLOBAL_CONTROL);
+	writel(INT_MST | INT_SLV, idev->base + INTERRUPT_ENABLE);
+
+	/* Set slave address */
+	dec_ctl = SLV_ADDR_DEC_SA1E;
+	if (slave->flags & I2C_CLIENT_TEN)
+		dec_ctl |= SLV_ADDR_DEC_SA1M;
+
+	writel(SLV_RX_ACSA1, idev->base + SLV_RX_CTL);
+	writel(dec_ctl, idev->base + SLV_ADDR_DEC_CTL);
+	writel(slave->addr, idev->base + SLV_ADDR_1);
+
+	/* Enable interrupts */
+	slv_int_mask |= SLV_STATUS_SRS1 | SLV_STATUS_SRRS1 | SLV_STATUS_SRND1;
+	slv_int_mask |= SLV_STATUS_SRC1;
+	writel(slv_int_mask, idev->base + SLV_INT_ENABLE);
+
+	return 0;
+}
+
+static int axxia_i2c_unreg_slave(struct i2c_client *slave)
+{
+	struct axxia_i2c_dev *idev = i2c_get_adapdata(slave->adapter);
+
+	/* Disable slave mode */
+	writel(GLOBAL_MST_EN, idev->base + GLOBAL_CONTROL);
+	writel(INT_MST, idev->base + INTERRUPT_ENABLE);
+
+	synchronize_irq(idev->irq);
+
+	idev->slave = NULL;
+
+	return 0;
+}
+
 static const struct i2c_algorithm axxia_i2c_algo = {
 	.master_xfer = axxia_i2c_xfer,
 	.functionality = axxia_i2c_func,
+	.reg_slave = axxia_i2c_reg_slave,
+	.unreg_slave = axxia_i2c_unreg_slave,
 };
 
 static const struct i2c_adapter_quirks axxia_i2c_quirks = {
@@ -599,7 +736,6 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	struct axxia_i2c_dev *idev = NULL;
 	struct resource *res;
 	void __iomem *base;
-	int irq;
 	int ret = 0;
 
 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
@@ -611,10 +747,10 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	idev->irq = platform_get_irq(pdev, 0);
+	if (idev->irq < 0) {
 		dev_err(&pdev->dev, "missing interrupt resource\n");
-		return irq;
+		return idev->irq;
 	}
 
 	idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
@@ -643,10 +779,10 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 		goto error_disable_clk;
 	}
 
-	ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
+	ret = devm_request_irq(&pdev->dev, idev->irq, axxia_i2c_isr, 0,
 			       pdev->name, idev);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
+		dev_err(&pdev->dev, "failed to claim IRQ%d\n", idev->irq);
 		goto error_disable_clk;
 	}
 
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 19ef2b0c682a..9ffdffaf6141 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -808,7 +808,7 @@ static struct i2c_algorithm bcm_iproc_algo = {
 	.unreg_slave = bcm_iproc_i2c_unreg_slave,
 };
 
-static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
+static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
 	.max_read_len = M_RX_MAX_READ_LEN,
 };
 
@@ -922,7 +922,9 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
 
 	adap = &iproc_i2c->adapter;
 	i2c_set_adapdata(adap, iproc_i2c);
-	strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name));
+	snprintf(adap->name, sizeof(adap->name),
+		"Broadcom iProc (%s)",
+		of_node_full_name(iproc_i2c->device->of_node));
 	adap->algo = &bcm_iproc_algo;
 	adap->quirks = &bcm_iproc_i2c_quirks;
 	adap->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 67752f7b0371..e01b2b57e724 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
@@ -389,7 +390,7 @@ static const struct i2c_algorithm bcm2835_i2c_algo = {
 };
 
 /*
- * This HW was reported to have problems with clock stretching:
+ * The BCM2835 was reported to have problems with clock stretching:
  * http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html
  * https://www.raspberrypi.org/forums/viewtopic.php?p=146272
  */
@@ -471,11 +472,12 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adap, i2c_dev);
 	adap->owner = THIS_MODULE;
 	adap->class = I2C_CLASS_DEPRECATED;
-	strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
+	snprintf(adap->name, sizeof(adap->name), "bcm2835 (%s)",
+		 of_node_full_name(pdev->dev.of_node));
 	adap->algo = &bcm2835_i2c_algo;
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
-	adap->quirks = &bcm2835_i2c_quirks;
+	adap->quirks = of_device_get_match_data(&pdev->dev);
 
 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
 
@@ -501,7 +503,8 @@ static int bcm2835_i2c_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id bcm2835_i2c_of_match[] = {
-	{ .compatible = "brcm,bcm2835-i2c" },
+	{ .compatible = "brcm,bcm2711-i2c" },
+	{ .compatible = "brcm,bcm2835-i2c", .data = &bcm2835_i2c_quirks },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm2835_i2c_of_match);
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 66af44bfa67d..b8fde61bb5d8 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -178,6 +178,51 @@ static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
 	.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
 };
 
+/*
+ * We are an i2c-adapter which itself is part of an i2c-client. This means that
+ * transfers done through us take adapter->bus_lock twice, once for our parent
+ * i2c-adapter and once to take our own bus_lock. Lockdep does not like this
+ * nested locking, to make lockdep happy in the case of busses with muxes, the
+ * i2c-core's i2c_adapter_lock_bus function calls:
+ * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+ *
+ * But i2c_adapter_depth only works when the direct parent of the adapter is
+ * another adapter, as it is only meant for muxes. In our case there is an
+ * i2c-client and MFD instantiated platform_device in the parent->child chain
+ * between the 2 devices.
+ *
+ * So we override the default i2c_lock_operations and pass a hardcoded
+ * depth of 1 to rt_mutex_lock_nested, to make lockdep happy.
+ *
+ * Note that if there were to be a mux attached to our adapter, this would
+ * break things again since the i2c-mux code expects the root-adapter to have
+ * a locking depth of 0. But we always have only 1 client directly attached
+ * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC.
+ */
+static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter,
+				 unsigned int flags)
+{
+	rt_mutex_lock_nested(&adapter->bus_lock, 1);
+}
+
+static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter,
+				   unsigned int flags)
+{
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = {
+	.lock_bus =    cht_wc_i2c_adap_lock_bus,
+	.trylock_bus = cht_wc_i2c_adap_trylock_bus,
+	.unlock_bus =  cht_wc_i2c_adap_unlock_bus,
+};
+
 /**** irqchip for the client connected to the extchgr i2c adapter ****/
 static void cht_wc_i2c_irq_lock(struct irq_data *data)
 {
@@ -286,6 +331,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	adap->adapter.owner = THIS_MODULE;
 	adap->adapter.class = I2C_CLASS_HWMON;
 	adap->adapter.algo = &cht_wc_i2c_adap_algo;
+	adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops;
 	strlcpy(adap->adapter.name, "PMIC I2C Adapter",
 		sizeof(adap->adapter.name));
 	adap->adapter.dev.parent = &pdev->dev;
@@ -363,8 +409,7 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
 {
 	struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
 
-	if (adap->client)
-		i2c_unregister_device(adap->client);
+	i2c_unregister_device(adap->client);
 	i2c_del_adapter(&adap->adapter);
 	irq_domain_remove(adap->irq_domain);
 
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index d464799e40a3..e8b328242256 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -655,15 +655,11 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 	struct i2c_adapter *adap = &dev->adapter;
 	struct gpio_desc *gpio;
-	int r;
-
-	gpio = devm_gpiod_get(dev->dev, "scl", GPIOD_OUT_HIGH);
-	if (IS_ERR(gpio)) {
-		r = PTR_ERR(gpio);
-		if (r == -ENOENT || r == -ENOSYS)
-			return 0;
-		return r;
-	}
+
+	gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH);
+	if (IS_ERR_OR_NULL(gpio))
+		return PTR_ERR_OR_ZERO(gpio);
+
 	rinfo->scl_gpiod = gpio;
 
 	gpio = devm_gpiod_get_optional(dev->dev, "sda", GPIOD_IN);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 76810deb2de6..050adda7c1bd 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -33,6 +33,7 @@ enum dw_pci_ctl_id_t {
 	baytrail,
 	cherrytrail,
 	haswell,
+	elkhartlake,
 };
 
 struct dw_scl_sda_cfg {
@@ -168,13 +169,20 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 		.flags = MODEL_CHERRYTRAIL,
 		.scl_sda_cfg = &byt_config,
 	},
+	[elkhartlake] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.clk_khz = 100000,
+	},
 };
 
 #ifdef CONFIG_PM
 static int i2c_dw_pci_suspend(struct device *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
 	i_dev->suspended = true;
 	i_dev->disable(i_dev);
@@ -184,8 +192,7 @@ static int i2c_dw_pci_suspend(struct device *dev)
 
 static int i2c_dw_pci_resume(struct device *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 	int ret;
 
 	ret = i_dev->init(i_dev);
@@ -227,6 +234,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 		return r;
 	}
 
+	pci_set_master(pdev);
+
 	r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
 	if (r) {
 		dev_err(&pdev->dev, "I/O memory remapping failed\n");
@@ -237,18 +246,24 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	if (!dev)
 		return -ENOMEM;
 
+	r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (r < 0)
+		return r;
+
 	dev->clk = NULL;
 	dev->controller = controller;
 	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
 	dev->base = pcim_iomap_table(pdev)[0];
 	dev->dev = &pdev->dev;
-	dev->irq = pdev->irq;
+	dev->irq = pci_irq_vector(pdev, 0);
 	dev->flags |= controller->flags;
 
 	if (controller->setup) {
 		r = controller->setup(pdev, controller);
-		if (r)
+		if (r) {
+			pci_free_irq_vectors(pdev);
 			return r;
+		}
 	}
 
 	dev->functionality = controller->functionality |
@@ -276,8 +291,10 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	adap->nr = controller->bus_num;
 
 	r = i2c_dw_probe(dev);
-	if (r)
+	if (r) {
+		pci_free_irq_vectors(pdev);
 		return r;
+	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
 	pm_runtime_use_autosuspend(&pdev->dev);
@@ -296,6 +313,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 	pm_runtime_get_noresume(&pdev->dev);
 
 	i2c_del_adapter(&dev->adapter);
+	pci_free_irq_vectors(pdev);
 }
 
 /* work with hotplug and coldplug */
@@ -331,6 +349,15 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
 	{ PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
 	{ PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
+	/* Elkhart Lake (PSE I2C) */
+	{ PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake },
+	{ PCI_VDEVICE(INTEL, 0x4bba), elkhartlake },
+	{ PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake },
+	{ PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake },
+	{ PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake },
+	{ PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake },
+	{ PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake },
+	{ PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake },
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index ddfb81872906..16dd338877d0 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -279,12 +279,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 
 	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(dev->rst)) {
-		if (PTR_ERR(dev->rst) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-	} else {
-		reset_control_deassert(dev->rst);
-	}
+	if (IS_ERR(dev->rst))
+		return PTR_ERR(dev->rst);
+
+	reset_control_deassert(dev->rst);
 
 	t = &dev->timings;
 	if (pdata)
@@ -346,8 +344,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	/* Optional interface clock */
 	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
-	if (IS_ERR(dev->pclk))
-		return PTR_ERR(dev->pclk);
+	if (IS_ERR(dev->pclk)) {
+		ret = PTR_ERR(dev->pclk);
+		goto exit_reset;
+	}
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_prepare_clk(dev, true)) {
@@ -400,8 +400,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 exit_probe:
 	dw_i2c_plat_pm_cleanup(dev);
 exit_reset:
-	if (!IS_ERR_OR_NULL(dev->rst))
-		reset_control_assert(dev->rst);
+	reset_control_assert(dev->rst);
 	return ret;
 }
 
@@ -419,8 +418,7 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 	dw_i2c_plat_pm_cleanup(dev);
 
-	if (!IS_ERR_OR_NULL(dev->rst))
-		reset_control_assert(dev->rst);
+	reset_control_assert(dev->rst);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index e4e7932f7800..e7514c16b756 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -791,9 +791,7 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	}
 
 	ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq,
-				IRQF_NO_SUSPEND | IRQF_ONESHOT,
-				dev_name(&pdev->dev), i2c);
-
+			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
 		goto err_clk;
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index da5eb3960def..e0c256922d4f 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -707,8 +707,10 @@ static int fsi_i2c_probe(struct device *dev)
 			continue;
 
 		port = kzalloc(sizeof(*port), GFP_KERNEL);
-		if (!port)
+		if (!port) {
+			of_node_put(np);
 			break;
+		}
 
 		port->master = i2c;
 		port->port = port_no;
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 4df1434b3597..8497c7a95dd4 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -445,8 +445,7 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 	hix5hd2_i2c_init(priv);
 
 	ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq,
-			       IRQF_NO_SUSPEND | IRQF_ONESHOT,
-			       dev_name(&pdev->dev), priv);
+			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), priv);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq);
 		goto err_clk;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 36e9559f880c..c09791fb4929 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -292,7 +292,8 @@ struct i801_priv {
 #define FEATURE_HOST_NOTIFY	BIT(5)
 /* Not really a feature, but it's convenient to handle it as such */
 #define FEATURE_IDF		BIT(15)
-#define FEATURE_TCO		BIT(16)
+#define FEATURE_TCO_SPT		BIT(16)
+#define FEATURE_TCO_CNL		BIT(17)
 
 static const char *i801_feature_names[] = {
 	"SMBus PEC",
@@ -1500,57 +1501,23 @@ static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
 }
 #endif
 
-static const struct itco_wdt_platform_data tco_platform_data = {
+static const struct itco_wdt_platform_data spt_tco_platform_data = {
 	.name = "Intel PCH",
 	.version = 4,
 };
 
 static DEFINE_SPINLOCK(p2sb_spinlock);
 
-static void i801_add_tco(struct i801_priv *priv)
+static struct platform_device *
+i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
+		 struct resource *tco_res)
 {
-	struct pci_dev *pci_dev = priv->pci_dev;
-	struct resource tco_res[3], *res;
-	struct platform_device *pdev;
+	struct resource *res;
 	unsigned int devfn;
-	u32 tco_base, tco_ctl;
-	u32 base_addr, ctrl_val;
 	u64 base64_addr;
+	u32 base_addr;
 	u8 hidden;
 
-	if (!(priv->features & FEATURE_TCO))
-		return;
-
-	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
-	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
-	if (!(tco_ctl & TCOCTL_EN))
-		return;
-
-	memset(tco_res, 0, sizeof(tco_res));
-
-	res = &tco_res[ICH_RES_IO_TCO];
-	res->start = tco_base & ~1;
-	res->end = res->start + 32 - 1;
-	res->flags = IORESOURCE_IO;
-
-	/*
-	 * Power Management registers.
-	 */
-	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
-	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
-
-	res = &tco_res[ICH_RES_IO_SMI];
-	res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
-	res->end = res->start + 3;
-	res->flags = IORESOURCE_IO;
-
-	/*
-	 * Enable the ACPI I/O space.
-	 */
-	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
-	ctrl_val |= ACPICTRL_EN;
-	pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
-
 	/*
 	 * We must access the NO_REBOOT bit over the Primary to Sideband
 	 * bridge (P2SB). The BIOS prevents the P2SB device from being
@@ -1586,15 +1553,76 @@ static void i801_add_tco(struct i801_priv *priv)
 	res->end = res->start + 3;
 	res->flags = IORESOURCE_MEM;
 
-	pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
-						 tco_res, 3, &tco_platform_data,
-						 sizeof(tco_platform_data));
-	if (IS_ERR(pdev)) {
-		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
+	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+					tco_res, 3, &spt_tco_platform_data,
+					sizeof(spt_tco_platform_data));
+}
+
+static const struct itco_wdt_platform_data cnl_tco_platform_data = {
+	.name = "Intel PCH",
+	.version = 6,
+};
+
+static struct platform_device *
+i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
+		 struct resource *tco_res)
+{
+	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+					tco_res, 2, &cnl_tco_platform_data,
+					sizeof(cnl_tco_platform_data));
+}
+
+static void i801_add_tco(struct i801_priv *priv)
+{
+	u32 base_addr, tco_base, tco_ctl, ctrl_val;
+	struct pci_dev *pci_dev = priv->pci_dev;
+	struct resource tco_res[3], *res;
+	unsigned int devfn;
+
+	/* If we have ACPI based watchdog use that instead */
+	if (acpi_has_watchdog())
 		return;
-	}
 
-	priv->tco_pdev = pdev;
+	if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL)))
+		return;
+
+	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
+	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
+	if (!(tco_ctl & TCOCTL_EN))
+		return;
+
+	memset(tco_res, 0, sizeof(tco_res));
+
+	res = &tco_res[ICH_RES_IO_TCO];
+	res->start = tco_base & ~1;
+	res->end = res->start + 32 - 1;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Power Management registers.
+	 */
+	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
+
+	res = &tco_res[ICH_RES_IO_SMI];
+	res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
+	res->end = res->start + 3;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Enable the ACPI I/O space.
+	 */
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
+	ctrl_val |= ACPICTRL_EN;
+	pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
+
+	if (priv->features & FEATURE_TCO_CNL)
+		priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
+	else
+		priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
+
+	if (IS_ERR(priv->tco_pdev))
+		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
 }
 
 #ifdef CONFIG_ACPI
@@ -1704,13 +1732,21 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	switch (dev->device) {
 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
 	case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
 	case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
+		priv->features |= FEATURE_I2C_BLOCK_READ;
+		priv->features |= FEATURE_IRQ;
+		priv->features |= FEATURE_SMBUS_PEC;
+		priv->features |= FEATURE_BLOCK_BUFFER;
+		priv->features |= FEATURE_TCO_SPT;
+		priv->features |= FEATURE_HOST_NOTIFY;
+		break;
+
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
 	case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS:
 	case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS:
 	case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
@@ -1720,9 +1756,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		priv->features |= FEATURE_IRQ;
 		priv->features |= FEATURE_SMBUS_PEC;
 		priv->features |= FEATURE_BLOCK_BUFFER;
-		/* If we have ACPI based watchdog use that instead */
-		if (!acpi_has_watchdog())
-			priv->features |= FEATURE_TCO;
+		priv->features |= FEATURE_TCO_CNL;
 		priv->features |= FEATURE_HOST_NOTIFY;
 		break;
 
@@ -1921,8 +1955,7 @@ static int i801_suspend(struct device *dev)
 
 static int i801_resume(struct device *dev)
 {
-	struct pci_dev *pci_dev = to_pci_dev(dev);
-	struct i801_priv *priv = pci_get_drvdata(pci_dev);
+	struct i801_priv *priv = dev_get_drvdata(dev);
 
 	i801_enable_host_notify(&priv->adapter);
 
diff --git a/drivers/i2c/busses/i2c-icy.c b/drivers/i2c/busses/i2c-icy.c
new file mode 100644
index 000000000000..8382eb64b424
--- /dev/null
+++ b/drivers/i2c/busses/i2c-icy.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * I2C driver for stand-alone PCF8584 style adapters on Zorro cards
+ *
+ * Original ICY documentation can be found on Aminet:
+ * https://aminet.net/package/docs/hard/icy
+ *
+ * There has been a modern community re-print of this design in 2019:
+ * https://www.a1k.org/forum/index.php?threads/70106/
+ *
+ * The card is basically a Philips PCF8584 connected straight to the
+ * beginning of the AutoConfig'd address space (register S1 on base+2),
+ * with /INT on /INT2 on the Zorro bus.
+ *
+ * Copyright (c) 2019 Max Staudt <max@enpas.org>
+ *
+ * This started as a fork of i2c-elektor.c and has evolved since.
+ * Thanks go to its authors for providing a base to grow on.
+ *
+ *
+ * IRQ support is currently not implemented.
+ *
+ * As it turns out, i2c-algo-pcf is really written with i2c-elektor's
+ * edge-triggered ISA interrupts in mind, while the Amiga's Zorro bus has
+ * level-triggered interrupts. This means that once an interrupt occurs, we
+ * have to tell the PCF8584 to shut up immediately, or it will keep the
+ * interrupt line busy and cause an IRQ storm.
+
+ * However, because of the PCF8584's host-side protocol, there is no good
+ * way to just quieten it without side effects. Rather, we have to perform
+ * the next read/write operation straight away, which will reset the /INT
+ * pin. This entails re-designing the core of i2c-algo-pcf in the future.
+ * For now, we never request an IRQ from the PCF8584, and poll it instead.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-pcf.h>
+
+#include <asm/amigaints.h>
+#include <linux/zorro.h>
+
+#include "../algos/i2c-algo-pcf.h"
+
+struct icy_i2c {
+	struct i2c_adapter adapter;
+
+	void __iomem *reg_s0;
+	void __iomem *reg_s1;
+	struct fwnode_handle *ltc2990_fwnode;
+	struct i2c_client *ltc2990_client;
+};
+
+/*
+ * Functions called by i2c-algo-pcf
+ */
+static void icy_pcf_setpcf(void *data, int ctl, int val)
+{
+	struct icy_i2c *i2c = (struct icy_i2c *)data;
+
+	u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0;
+
+	z_writeb(val, address);
+}
+
+static int icy_pcf_getpcf(void *data, int ctl)
+{
+	struct icy_i2c *i2c = (struct icy_i2c *)data;
+
+	u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0;
+
+	return z_readb(address);
+}
+
+static int icy_pcf_getown(void *data)
+{
+	return 0x55;
+}
+
+static int icy_pcf_getclock(void *data)
+{
+	return 0x1c;
+}
+
+static void icy_pcf_waitforpin(void *data)
+{
+	usleep_range(50, 150);
+}
+
+/*
+ * Main i2c-icy part
+ */
+static unsigned short const icy_ltc2990_addresses[] = {
+	0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END
+};
+
+/*
+ * Additional sensors exposed once this property is applied:
+ *
+ * in1 will be the voltage of the 5V rail, divided by 2.
+ * in2 will be the voltage of the 12V rail, divided by 4.
+ * temp3 will be measured using a PCB loop next the chip.
+ */
+static const u32 icy_ltc2990_meas_mode[] = {0, 3};
+
+static const struct property_entry icy_ltc2990_props[] = {
+	PROPERTY_ENTRY_U32_ARRAY("lltc,meas-mode", icy_ltc2990_meas_mode),
+	{ }
+};
+
+static int icy_probe(struct zorro_dev *z,
+		     const struct zorro_device_id *ent)
+{
+	struct icy_i2c *i2c;
+	struct i2c_algo_pcf_data *algo_data;
+	struct fwnode_handle *new_fwnode;
+	struct i2c_board_info ltc2990_info = {
+		.type		= "ltc2990",
+		.addr		= 0x4c,
+	};
+
+	i2c = devm_kzalloc(&z->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	algo_data = devm_kzalloc(&z->dev, sizeof(*algo_data), GFP_KERNEL);
+	if (!algo_data)
+		return -ENOMEM;
+
+	dev_set_drvdata(&z->dev, i2c);
+	i2c->adapter.dev.parent = &z->dev;
+	i2c->adapter.owner = THIS_MODULE;
+	/* i2c->adapter.algo assigned by i2c_pcf_add_bus() */
+	i2c->adapter.algo_data = algo_data;
+	strlcpy(i2c->adapter.name, "ICY I2C Zorro adapter",
+		sizeof(i2c->adapter.name));
+
+	if (!devm_request_mem_region(&z->dev,
+				     z->resource.start,
+				     4, i2c->adapter.name))
+		return -ENXIO;
+
+	/* Driver private data */
+	i2c->reg_s0 = ZTWO_VADDR(z->resource.start);
+	i2c->reg_s1 = ZTWO_VADDR(z->resource.start + 2);
+
+	algo_data->data = i2c;
+	algo_data->setpcf     = icy_pcf_setpcf;
+	algo_data->getpcf     = icy_pcf_getpcf;
+	algo_data->getown     = icy_pcf_getown;
+	algo_data->getclock   = icy_pcf_getclock;
+	algo_data->waitforpin = icy_pcf_waitforpin;
+
+	if (i2c_pcf_add_bus(&i2c->adapter)) {
+		dev_err(&z->dev, "i2c_pcf_add_bus() failed\n");
+		return -ENXIO;
+	}
+
+	dev_info(&z->dev, "ICY I2C controller at %pa, IRQ not implemented\n",
+		 &z->resource.start);
+
+	/*
+	 * The 2019 a1k.org PCBs have an LTC2990 at 0x4c, so start
+	 * it automatically once ltc2990 is modprobed.
+	 *
+	 * in0 is the voltage of the internal 5V power supply.
+	 * temp1 is the temperature inside the chip.
+	 *
+	 * See property_entry above for in1, in2, temp3.
+	 */
+	new_fwnode = fwnode_create_software_node(icy_ltc2990_props, NULL);
+	if (IS_ERR(new_fwnode)) {
+		dev_info(&z->dev, "Failed to create fwnode for LTC2990, error: %ld\n",
+			 PTR_ERR(new_fwnode));
+	} else {
+		/*
+		 * Store the fwnode so we can destroy it on .remove().
+		 * Only store it on success, as fwnode_remove_software_node()
+		 * is NULL safe, but not PTR_ERR safe.
+		 */
+		i2c->ltc2990_fwnode = new_fwnode;
+		ltc2990_info.fwnode = new_fwnode;
+
+		i2c->ltc2990_client =
+			i2c_new_probed_device(&i2c->adapter,
+					      &ltc2990_info,
+					      icy_ltc2990_addresses,
+					      NULL);
+	}
+
+	return 0;
+}
+
+static void icy_remove(struct zorro_dev *z)
+{
+	struct icy_i2c *i2c = dev_get_drvdata(&z->dev);
+
+	i2c_unregister_device(i2c->ltc2990_client);
+	fwnode_remove_software_node(i2c->ltc2990_fwnode);
+
+	i2c_del_adapter(&i2c->adapter);
+}
+
+static const struct zorro_device_id icy_zorro_tbl[] = {
+	{ ZORRO_ID(VMC, 15, 0), },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(zorro, icy_zorro_tbl);
+
+static struct zorro_driver icy_driver = {
+	.name           = "i2c-icy",
+	.id_table       = icy_zorro_tbl,
+	.probe          = icy_probe,
+	.remove         = icy_remove,
+};
+
+module_driver(icy_driver,
+	      zorro_register_driver,
+	      zorro_unregister_driver);
+
+MODULE_AUTHOR("Max Staudt <max@enpas.org>");
+MODULE_DESCRIPTION("I2C bus via PCF8584 on ICY Zorro card");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index dc00fabc919a..c92b56485fa6 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -545,7 +545,6 @@ MODULE_DEVICE_TABLE(of, lpi2c_imx_of_match);
 static int lpi2c_imx_probe(struct platform_device *pdev)
 {
 	struct lpi2c_imx_struct *lpi2c_imx;
-	struct resource *res;
 	unsigned int temp;
 	int irq, ret;
 
@@ -553,8 +552,7 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	if (!lpi2c_imx)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	lpi2c_imx->base = devm_ioremap_resource(&pdev->dev, res);
+	lpi2c_imx->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(lpi2c_imx->base))
 		return PTR_ERR(lpi2c_imx->base);
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 15f6cde6452f..a3b61336fe55 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -20,6 +20,7 @@
  *
  */
 
+#include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
@@ -255,6 +256,12 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
 
+static const struct acpi_device_id i2c_imx_acpi_ids[] = {
+	{"NXP0001", .driver_data = (kernel_ulong_t)&vf610_i2c_hwdata},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, i2c_imx_acpi_ids);
+
 static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
 {
 	return i2c_imx->hwdata->devtype == IMX1_I2C;
@@ -1048,14 +1055,13 @@ static const struct i2c_algorithm i2c_imx_algo = {
 
 static int i2c_imx_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
-							   &pdev->dev);
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
 	struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	void __iomem *base;
 	int irq, ret;
 	dma_addr_t phy_addr;
+	const struct imx_i2c_hwdata *match;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
 
@@ -1075,8 +1081,9 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	if (!i2c_imx)
 		return -ENOMEM;
 
-	if (of_id)
-		i2c_imx->hwdata = of_id->data;
+	match = device_get_match_data(&pdev->dev);
+	if (match)
+		i2c_imx->hwdata = match;
 	else
 		i2c_imx->hwdata = (struct imx_i2c_hwdata *)
 				platform_get_device_id(pdev)->driver_data;
@@ -1089,6 +1096,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->adapter.nr		= pdev->id;
 	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
 	i2c_imx->base			= base;
+	ACPI_COMPANION_SET(&i2c_imx->adapter.dev, ACPI_COMPANION(&pdev->dev));
 
 	/* Get I2C clock */
 	i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
@@ -1247,6 +1255,7 @@ static struct platform_driver i2c_imx_driver = {
 		.name = DRIVER_NAME,
 		.pm = &i2c_imx_pm_ops,
 		.of_match_table = i2c_imx_dt_ids,
+		.acpi_match_table = i2c_imx_acpi_ids,
 	},
 	.id_table = imx_i2c_devtype,
 };
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 02d23edb2fb1..2f95e25a10f7 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -781,8 +781,6 @@ static int ismt_dev_init(struct ismt_priv *priv)
 	if (!priv->hw)
 		return -ENOMEM;
 
-	memset(priv->hw, 0, (ISMT_DESC_ENTRIES * sizeof(struct ismt_desc)));
-
 	priv->head = 0;
 	init_completion(&priv->cmp);
 
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 7d79317a1046..89224913f578 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -802,7 +802,6 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mxs_i2c_dev *i2c;
 	struct i2c_adapter *adap;
-	struct resource *res;
 	int err, irq;
 
 	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
@@ -814,8 +813,7 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 		i2c->dev_type = device_id->driver_data;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, res);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs))
 		return PTR_ERR(i2c->regs);
 
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 4117f1abc7c6..ca8b3ecfa93d 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -703,8 +703,9 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	}
 
 	if (ocores_algorithm.master_xfer != ocores_xfer_polling) {
-		ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
-				       pdev->name, i2c);
+		ret = devm_request_any_context_irq(&pdev->dev, irq,
+						   ocores_isr, 0,
+						   pdev->name, i2c);
 		if (ret) {
 			dev_err(&pdev->dev, "Cannot claim IRQ\n");
 			goto err_clk;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index cba325eb852f..30ded6422e7b 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -72,7 +72,8 @@
 #define PIIX4_BLOCK_DATA	0x14
 
 /* Multi-port constants */
-#define PIIX4_MAX_ADAPTERS 4
+#define PIIX4_MAX_ADAPTERS	4
+#define HUDSON2_MAIN_PORTS	2 /* HUDSON2, KERNCZ reserves ports 3, 4 */
 
 /* SB800 constants */
 #define SB800_PIIX4_SMB_IDX		0xcd6
@@ -806,10 +807,12 @@ MODULE_DEVICE_TABLE (pci, piix4_ids);
 
 static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
 static struct i2c_adapter *piix4_aux_adapter;
+static int piix4_adapter_count;
 
 static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 			     bool sb800_main, u8 port, bool notify_imc,
-			     const char *name, struct i2c_adapter **padap)
+			     u8 hw_port_nr, const char *name,
+			     struct i2c_adapter **padap)
 {
 	struct i2c_adapter *adap;
 	struct i2c_piix4_adapdata *adapdata;
@@ -841,6 +844,12 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 	/* set up the sysfs linkage to our parent device */
 	adap->dev.parent = &dev->dev;
 
+	if (has_acpi_companion(&dev->dev)) {
+		acpi_preset_companion(&adap->dev,
+				      ACPI_COMPANION(&dev->dev),
+				      hw_port_nr);
+	}
+
 	snprintf(adap->name, sizeof(adap->name),
 		"SMBus PIIX4 adapter%s at %04x", name, smba);
 
@@ -865,8 +874,19 @@ static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
 	int port;
 	int retval;
 
-	for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
+	if (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS ||
+	    (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+	     dev->revision >= 0x1F)) {
+		piix4_adapter_count = HUDSON2_MAIN_PORTS;
+	} else {
+		piix4_adapter_count = PIIX4_MAX_ADAPTERS;
+	}
+
+	for (port = 0; port < piix4_adapter_count; port++) {
+		u8 hw_port_nr = port == 0 ? 0 : port + 1;
+
 		retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
+					   hw_port_nr,
 					   piix4_main_port_names_sb800[port],
 					   &piix4_main_adapters[port]);
 		if (retval < 0)
@@ -937,8 +957,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			return retval;
 
 		/* Try to register main SMBus adapter, give up if we can't */
-		retval = piix4_add_adapter(dev, retval, false, 0, false, "",
-					   &piix4_main_adapters[0]);
+		retval = piix4_add_adapter(dev, retval, false, 0, false, 0,
+					   "", &piix4_main_adapters[0]);
 		if (retval < 0)
 			return retval;
 	}
@@ -964,7 +984,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (retval > 0) {
 		/* Try to add the aux adapter if it exists,
 		 * piix4_add_adapter will clean up if this fails */
-		piix4_add_adapter(dev, retval, false, 0, false,
+		piix4_add_adapter(dev, retval, false, 0, false, 1,
 				  is_sb800 ? piix4_aux_port_name_sb800 : "",
 				  &piix4_aux_adapter);
 	}
@@ -987,7 +1007,7 @@ static void piix4_adap_remove(struct i2c_adapter *adap)
 
 static void piix4_remove(struct pci_dev *dev)
 {
-	int port = PIIX4_MAX_ADAPTERS;
+	int port = piix4_adapter_count;
 
 	while (--port >= 0) {
 		if (piix4_main_adapters[port]) {
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 961123529678..b432e7580458 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -465,9 +466,9 @@ static int sprd_i2c_clk_init(struct sprd_i2c *i2c_dev)
 
 	i2c_dev->clk = devm_clk_get(i2c_dev->dev, "enable");
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_warn(i2c_dev->dev, "i2c%d can't get the enable clock\n",
-			 i2c_dev->adap.nr);
-		i2c_dev->clk = NULL;
+		dev_err(i2c_dev->dev, "i2c%d can't get the enable clock\n",
+			i2c_dev->adap.nr);
+		return PTR_ERR(i2c_dev->clk);
 	}
 
 	return 0;
@@ -477,7 +478,6 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct sprd_i2c *i2c_dev;
-	struct resource *res;
 	u32 prop;
 	int ret;
 
@@ -487,8 +487,7 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 	if (!i2c_dev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c_dev->base = devm_ioremap_resource(dev, res);
+	i2c_dev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c_dev->base))
 		return PTR_ERR(i2c_dev->base);
 
@@ -520,7 +519,10 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 	if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
 		return -EINVAL;
 
-	sprd_i2c_clk_init(i2c_dev);
+	ret = sprd_i2c_clk_init(i2c_dev);
+	if (ret)
+		return ret;
+
 	platform_set_drvdata(pdev, i2c_dev);
 
 	ret = clk_prepare_enable(i2c_dev->clk);
@@ -644,8 +646,7 @@ static struct platform_driver sprd_i2c_driver = {
 	},
 };
 
-static int sprd_i2c_init(void)
-{
-	return platform_driver_register(&sprd_i2c_driver);
-}
-arch_initcall_sync(sprd_i2c_init);
+module_platform_driver(sprd_i2c_driver);
+
+MODULE_DESCRIPTION("Spreadtrum I2C master controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 266d1c269b83..d36cf08461f7 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1809,7 +1809,7 @@ static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
 		I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
-static struct i2c_algorithm stm32f7_i2c_algo = {
+static const struct i2c_algorithm stm32f7_i2c_algo = {
 	.master_xfer = stm32f7_i2c_xfer,
 	.smbus_xfer = stm32f7_i2c_smbus_xfer,
 	.functionality = stm32f7_i2c_func,
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index f724c8e6b360..39762f0611b1 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -526,7 +526,7 @@ static const struct i2c_algorithm synquacer_i2c_algo = {
 	.functionality	= synquacer_i2c_functionality,
 };
 
-static struct i2c_adapter synquacer_i2c_ops = {
+static const struct i2c_adapter synquacer_i2c_ops = {
 	.owner		= THIS_MODULE,
 	.name		= "synquacer_i2c-adapter",
 	.algo		= &synquacer_i2c_algo,
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 37347c93e8e0..0bff3f3a8779 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -39,7 +39,7 @@ struct taos_data {
 };
 
 /* TAOS TSL2550 EVM */
-static struct i2c_board_info tsl2550_info = {
+static const struct i2c_board_info tsl2550_info = {
 	I2C_BOARD_INFO("tsl2550", 0x39),
 };
 
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9fcb13beeb8f..c1683f9338b4 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -636,7 +636,7 @@ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
 	dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
 }
 
-static int tegra_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 	int ret;
@@ -665,7 +665,7 @@ static int tegra_i2c_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static int tegra_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
@@ -713,12 +713,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 	u32 tsu_thd;
 	u8 tlow, thigh;
 
-	err = pm_runtime_get_sync(i2c_dev->dev);
-	if (err < 0) {
-		dev_err(i2c_dev->dev, "runtime resume failed %d\n", err);
-		return err;
-	}
-
 	reset_control_assert(i2c_dev->rst);
 	udelay(2);
 	reset_control_deassert(i2c_dev->rst);
@@ -772,7 +766,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 		if (err) {
 			dev_err(i2c_dev->dev,
 				"failed changing clock rate: %d\n", err);
-			goto err;
+			return err;
 		}
 	}
 
@@ -787,23 +781,21 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 
 	err = tegra_i2c_flush_fifos(i2c_dev);
 	if (err)
-		goto err;
+		return err;
 
 	if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
 		i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
 
 	err = tegra_i2c_wait_for_config_load(i2c_dev);
 	if (err)
-		goto err;
+		return err;
 
 	if (i2c_dev->irq_disabled) {
 		i2c_dev->irq_disabled = false;
 		enable_irq(i2c_dev->irq);
 	}
 
-err:
-	pm_runtime_put(i2c_dev->dev);
-	return err;
+	return 0;
 }
 
 static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
@@ -1616,12 +1608,14 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	}
 
 	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
+	if (!pm_runtime_enabled(&pdev->dev))
 		ret = tegra_i2c_runtime_resume(&pdev->dev);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "runtime resume failed\n");
-			goto unprepare_div_clk;
-		}
+	else
+		ret = pm_runtime_get_sync(i2c_dev->dev);
+
+	if (ret < 0) {
+		dev_err(&pdev->dev, "runtime resume failed\n");
+		goto unprepare_div_clk;
 	}
 
 	if (i2c_dev->is_multimaster_mode) {
@@ -1666,6 +1660,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto release_dma;
 
+	pm_runtime_put(&pdev->dev);
+
 	return 0;
 
 release_dma:
@@ -1711,8 +1707,7 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int tegra_i2c_suspend(struct device *dev)
+static int __maybe_unused tegra_i2c_suspend(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
@@ -1721,38 +1716,41 @@ static int tegra_i2c_suspend(struct device *dev)
 	return 0;
 }
 
-static int tegra_i2c_resume(struct device *dev)
+static int __maybe_unused tegra_i2c_resume(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 	int err;
 
+	err = tegra_i2c_runtime_resume(dev);
+	if (err)
+		return err;
+
 	err = tegra_i2c_init(i2c_dev, false);
 	if (err)
 		return err;
 
+	err = tegra_i2c_runtime_suspend(dev);
+	if (err)
+		return err;
+
 	i2c_mark_adapter_resumed(&i2c_dev->adapter);
 
 	return 0;
 }
 
 static const struct dev_pm_ops tegra_i2c_pm = {
-	SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
 	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
 			   NULL)
 };
 
-#define TEGRA_I2C_PM	(&tegra_i2c_pm)
-#else
-#define TEGRA_I2C_PM	NULL
-#endif
-
 static struct platform_driver tegra_i2c_driver = {
 	.probe   = tegra_i2c_probe,
 	.remove  = tegra_i2c_remove,
 	.driver  = {
 		.name  = "tegra-i2c",
 		.of_match_table = tegra_i2c_of_match,
-		.pm    = TEGRA_I2C_PM,
+		.pm    = &tegra_i2c_pm,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index 7acca2599f04..4241aac79e7e 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -108,7 +108,6 @@ static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv,
 		if (fifo_space-- <= 0)
 			break;
 
-		dev_dbg(&priv->adap.dev, "write data: %02x\n", *priv->buf);
 		writel(*priv->buf++, priv->membase + UNIPHIER_FI2C_DTTX);
 		priv->len--;
 	}
@@ -124,7 +123,6 @@ static void uniphier_fi2c_drain_rxfifo(struct uniphier_fi2c_priv *priv)
 			break;
 
 		*priv->buf++ = readl(priv->membase + UNIPHIER_FI2C_DTRX);
-		dev_dbg(&priv->adap.dev, "read data: %02x\n", priv->buf[-1]);
 		priv->len--;
 	}
 }
@@ -142,8 +140,6 @@ static void uniphier_fi2c_clear_irqs(struct uniphier_fi2c_priv *priv,
 
 static void uniphier_fi2c_stop(struct uniphier_fi2c_priv *priv)
 {
-	dev_dbg(&priv->adap.dev, "stop condition\n");
-
 	priv->enabled_irqs |= UNIPHIER_FI2C_INT_STOP;
 	uniphier_fi2c_set_irqs(priv);
 	writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STO,
@@ -160,21 +156,15 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
 	irq_status = readl(priv->membase + UNIPHIER_FI2C_INT);
 	irq_status &= priv->enabled_irqs;
 
-	dev_dbg(&priv->adap.dev,
-		"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
-		priv->enabled_irqs, irq_status);
-
 	if (irq_status & UNIPHIER_FI2C_INT_STOP)
 		goto complete;
 
 	if (unlikely(irq_status & UNIPHIER_FI2C_INT_AL)) {
-		dev_dbg(&priv->adap.dev, "arbitration lost\n");
 		priv->error = -EAGAIN;
 		goto complete;
 	}
 
 	if (unlikely(irq_status & UNIPHIER_FI2C_INT_NA)) {
-		dev_dbg(&priv->adap.dev, "could not get ACK\n");
 		priv->error = -ENXIO;
 		if (priv->flags & UNIPHIER_FI2C_RD) {
 			/*
@@ -215,18 +205,14 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
 		if (unlikely(priv->flags & UNIPHIER_FI2C_MANUAL_NACK)) {
 			if (priv->len <= UNIPHIER_FI2C_FIFO_SIZE &&
 			    !(priv->flags & UNIPHIER_FI2C_BYTE_WISE)) {
-				dev_dbg(&priv->adap.dev,
-					"enable read byte count IRQ\n");
 				priv->enabled_irqs |= UNIPHIER_FI2C_INT_RB;
 				uniphier_fi2c_set_irqs(priv);
 				priv->flags |= UNIPHIER_FI2C_BYTE_WISE;
 			}
-			if (priv->len <= 1) {
-				dev_dbg(&priv->adap.dev, "set NACK\n");
+			if (priv->len <= 1)
 				writel(UNIPHIER_FI2C_CR_MST |
 				       UNIPHIER_FI2C_CR_NACK,
 				       priv->membase + UNIPHIER_FI2C_CR);
-			}
 		}
 
 		goto handled;
@@ -334,10 +320,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 	bool is_read = msg->flags & I2C_M_RD;
 	unsigned long time_left, flags;
 
-	dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, repeat=%d, stop=%d\n",
-		is_read ? "receive" : "transmit", msg->addr, msg->len,
-		repeat, stop);
-
 	priv->len = msg->len;
 	priv->buf = msg->buf;
 	priv->enabled_irqs = UNIPHIER_FI2C_INT_FAULTS;
@@ -359,7 +341,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 	else
 		uniphier_fi2c_tx_init(priv, msg->addr, repeat);
 
-	dev_dbg(&adap->dev, "start condition\n");
 	/*
 	 * For a repeated START condition, writing a slave address to the FIFO
 	 * kicks the controller. So, the UNIPHIER_FI2C_CR register should be
@@ -383,7 +364,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 		uniphier_fi2c_recover(priv);
 		return -ETIMEDOUT;
 	}
-	dev_dbg(&adap->dev, "complete\n");
 
 	if (unlikely(priv->flags & UNIPHIER_FI2C_DEFER_STOP_COMP)) {
 		u32 status;
@@ -538,7 +518,6 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct uniphier_fi2c_priv *priv;
-	struct resource *regs;
 	u32 bus_speed;
 	unsigned long clk_rate;
 	int irq, ret;
@@ -547,8 +526,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->membase = devm_ioremap_resource(dev, regs);
+	priv->membase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->membase))
 		return PTR_ERR(priv->membase);
 
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 0173840c32af..0270090c0360 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -71,7 +71,6 @@ static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata,
 	reinit_completion(&priv->comp);
 
 	txdata |= UNIPHIER_I2C_DTRM_IRQEN;
-	dev_dbg(&adap->dev, "write data: 0x%04x\n", txdata);
 	writel(txdata, priv->membase + UNIPHIER_I2C_DTRM);
 
 	time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
@@ -81,8 +80,6 @@ static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata,
 	}
 
 	rxdata = readl(priv->membase + UNIPHIER_I2C_DREC);
-	dev_dbg(&adap->dev, "read data: 0x%04x\n", rxdata);
-
 	if (rxdatap)
 		*rxdatap = rxdata;
 
@@ -98,14 +95,11 @@ static int uniphier_i2c_send_byte(struct i2c_adapter *adap, u32 txdata)
 	if (ret)
 		return ret;
 
-	if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB)) {
-		dev_dbg(&adap->dev, "arbitration lost\n");
+	if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB))
 		return -EAGAIN;
-	}
-	if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB)) {
-		dev_dbg(&adap->dev, "could not get ACK\n");
+
+	if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB))
 		return -ENXIO;
-	}
 
 	return 0;
 }
@@ -115,7 +109,6 @@ static int uniphier_i2c_tx(struct i2c_adapter *adap, u16 addr, u16 len,
 {
 	int ret;
 
-	dev_dbg(&adap->dev, "start condition\n");
 	ret = uniphier_i2c_send_byte(adap, addr << 1 |
 				     UNIPHIER_I2C_DTRM_STA |
 				     UNIPHIER_I2C_DTRM_NACK);
@@ -137,7 +130,6 @@ static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len,
 {
 	int ret;
 
-	dev_dbg(&adap->dev, "start condition\n");
 	ret = uniphier_i2c_send_byte(adap, addr << 1 |
 				     UNIPHIER_I2C_DTRM_STA |
 				     UNIPHIER_I2C_DTRM_NACK |
@@ -161,7 +153,6 @@ static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len,
 
 static int uniphier_i2c_stop(struct i2c_adapter *adap)
 {
-	dev_dbg(&adap->dev, "stop condition\n");
 	return uniphier_i2c_send_byte(adap, UNIPHIER_I2C_DTRM_STO |
 				      UNIPHIER_I2C_DTRM_NACK);
 }
@@ -173,9 +164,6 @@ static int uniphier_i2c_master_xfer_one(struct i2c_adapter *adap,
 	bool recovery = false;
 	int ret;
 
-	dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n",
-		is_read ? "receive" : "transmit", msg->addr, msg->len, stop);
-
 	if (is_read)
 		ret = uniphier_i2c_rx(adap, msg->addr, msg->len, msg->buf);
 	else
@@ -326,7 +314,6 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct uniphier_i2c_priv *priv;
-	struct resource *regs;
 	u32 bus_speed;
 	unsigned long clk_rate;
 	int irq, ret;
@@ -335,8 +322,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->membase = devm_ioremap_resource(dev, regs);
+	priv->membase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->membase))
 		return PTR_ERR(priv->membase);
 
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 72b300174cb8..5f6a4985f2bc 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -350,13 +350,11 @@ static int i2c_device_probe(struct device *dev)
 		return -ENODEV;
 
 	if (client->flags & I2C_CLIENT_WAKE) {
-		int wakeirq = -ENOENT;
+		int wakeirq;
 
-		if (dev->of_node) {
-			wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
-			if (wakeirq == -EPROBE_DEFER)
-				return wakeirq;
-		}
+		wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
+		if (wakeirq == -EPROBE_DEFER)
+			return wakeirq;
 
 		device_init_wakeup(&client->dev, true);
 
@@ -966,7 +964,7 @@ struct i2c_client *devm_i2c_new_dummy_device(struct device *dev,
 EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device);
 
 /**
- * i2c_new_secondary_device - Helper to get the instantiated secondary address
+ * i2c_new_ancillary_device - Helper to get the instantiated secondary address
  * and create the associated device
  * @client: Handle to the primary client
  * @name: Handle to specify which secondary address to get
@@ -985,9 +983,9 @@ EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device);
  * cell whose "reg-names" value matches the slave name.
  *
  * This returns the new i2c client, which should be saved for later use with
- * i2c_unregister_device(); or NULL to indicate an error.
+ * i2c_unregister_device(); or an ERR_PTR to describe the error.
  */
-struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
+struct i2c_client *i2c_new_ancillary_device(struct i2c_client *client,
 						const char *name,
 						u16 default_addr)
 {
@@ -1002,9 +1000,9 @@ struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
 	}
 
 	dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
-	return i2c_new_dummy(client->adapter, addr);
+	return i2c_new_dummy_device(client->adapter, addr);
 }
-EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
+EXPORT_SYMBOL_GPL(i2c_new_ancillary_device);
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index be65d3842878..92ff9991bae8 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -11,6 +11,13 @@
  * pointer, yet implementation is deferred until the need actually arises.
  */
 
+/*
+ * FIXME: What to do if only 8 bits of a 16 bit address are sent?
+ * The ST-M24C64 sends only 0xff then. Needs verification with other
+ * EEPROMs, though. We currently use the 8 bit as a valid address.
+ */
+
+#include <linux/bitfield.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -21,12 +28,18 @@
 
 struct eeprom_data {
 	struct bin_attribute bin;
-	bool first_write;
 	spinlock_t buffer_lock;
-	u8 buffer_idx;
+	u16 buffer_idx;
+	u16 address_mask;
+	u8 num_address_bytes;
+	u8 idx_write_cnt;
 	u8 buffer[];
 };
 
+#define I2C_SLAVE_BYTELEN GENMASK(15, 0)
+#define I2C_SLAVE_FLAG_ADDR16 BIT(16)
+#define I2C_SLAVE_DEVICE_MAGIC(_len, _flags) ((_flags) | (_len))
+
 static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 				     enum i2c_slave_event event, u8 *val)
 {
@@ -34,12 +47,14 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 
 	switch (event) {
 	case I2C_SLAVE_WRITE_RECEIVED:
-		if (eeprom->first_write) {
-			eeprom->buffer_idx = *val;
-			eeprom->first_write = false;
+		if (eeprom->idx_write_cnt < eeprom->num_address_bytes) {
+			if (eeprom->idx_write_cnt == 0)
+				eeprom->buffer_idx = 0;
+			eeprom->buffer_idx = *val | (eeprom->buffer_idx << 8);
+			eeprom->idx_write_cnt++;
 		} else {
 			spin_lock(&eeprom->buffer_lock);
-			eeprom->buffer[eeprom->buffer_idx++] = *val;
+			eeprom->buffer[eeprom->buffer_idx++ & eeprom->address_mask] = *val;
 			spin_unlock(&eeprom->buffer_lock);
 		}
 		break;
@@ -50,7 +65,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 		/* fallthrough */
 	case I2C_SLAVE_READ_REQUESTED:
 		spin_lock(&eeprom->buffer_lock);
-		*val = eeprom->buffer[eeprom->buffer_idx];
+		*val = eeprom->buffer[eeprom->buffer_idx & eeprom->address_mask];
 		spin_unlock(&eeprom->buffer_lock);
 		/*
 		 * Do not increment buffer_idx here, because we don't know if
@@ -61,7 +76,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 
 	case I2C_SLAVE_STOP:
 	case I2C_SLAVE_WRITE_REQUESTED:
-		eeprom->first_write = true;
+		eeprom->idx_write_cnt = 0;
 		break;
 
 	default:
@@ -105,13 +120,16 @@ static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_de
 {
 	struct eeprom_data *eeprom;
 	int ret;
-	unsigned size = id->driver_data;
+	unsigned int size = FIELD_GET(I2C_SLAVE_BYTELEN, id->driver_data);
+	unsigned int flag_addr16 = FIELD_GET(I2C_SLAVE_FLAG_ADDR16, id->driver_data);
 
 	eeprom = devm_kzalloc(&client->dev, sizeof(struct eeprom_data) + size, GFP_KERNEL);
 	if (!eeprom)
 		return -ENOMEM;
 
-	eeprom->first_write = true;
+	eeprom->idx_write_cnt = 0;
+	eeprom->num_address_bytes = flag_addr16 ? 2 : 1;
+	eeprom->address_mask = size - 1;
 	spin_lock_init(&eeprom->buffer_lock);
 	i2c_set_clientdata(client, eeprom);
 
@@ -146,7 +164,9 @@ static int i2c_slave_eeprom_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id i2c_slave_eeprom_id[] = {
-	{ "slave-24c02", 2048 / 8 },
+	{ "slave-24c02", I2C_SLAVE_DEVICE_MAGIC(2048 / 8,  0) },
+	{ "slave-24c32", I2C_SLAVE_DEVICE_MAGIC(32768 / 8, I2C_SLAVE_FLAG_ADDR16) },
+	{ "slave-24c64", I2C_SLAVE_DEVICE_MAGIC(65536 / 8, I2C_SLAVE_FLAG_ADDR16) },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, i2c_slave_eeprom_id);
diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 0a47d474e97a..23e02ff27b17 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -183,14 +183,14 @@ static int adv748x_initialise_clients(struct adv748x_state *state)
 	int ret;
 
 	for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) {
-		state->i2c_clients[i] = i2c_new_secondary_device(
+		state->i2c_clients[i] = i2c_new_ancillary_device(
 				state->client,
 				adv748x_default_addresses[i].name,
 				adv748x_default_addresses[i].default_addr);
 
-		if (state->i2c_clients[i] == NULL) {
+		if (IS_ERR(state->i2c_clients[i])) {
 			adv_err(state, "failed to create i2c client %u\n", i);
-			return -ENOMEM;
+			return PTR_ERR(state->i2c_clients[i]);
 		}
 
 		ret = adv748x_configure_regmap(state, i);
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 28a84bf9f8a9..2dedd6ebb236 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2862,10 +2862,8 @@ static void adv76xx_unregister_clients(struct adv76xx_state *state)
 {
 	unsigned int i;
 
-	for (i = 1; i < ARRAY_SIZE(state->i2c_clients); ++i) {
-		if (state->i2c_clients[i])
-			i2c_unregister_device(state->i2c_clients[i]);
-	}
+	for (i = 1; i < ARRAY_SIZE(state->i2c_clients); ++i)
+		i2c_unregister_device(state->i2c_clients[i]);
 }
 
 static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd,
@@ -2878,14 +2876,14 @@ static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd,
 	struct i2c_client *new_client;
 
 	if (pdata && pdata->i2c_addresses[page])
-		new_client = i2c_new_dummy(client->adapter,
+		new_client = i2c_new_dummy_device(client->adapter,
 					   pdata->i2c_addresses[page]);
 	else
-		new_client = i2c_new_secondary_device(client,
+		new_client = i2c_new_ancillary_device(client,
 				adv76xx_default_addresses[page].name,
 				adv76xx_default_addresses[page].default_addr);
 
-	if (new_client)
+	if (!IS_ERR(new_client))
 		io_write(sd, io_reg, new_client->addr << 1);
 
 	return new_client;
@@ -3516,15 +3514,19 @@ static int adv76xx_probe(struct i2c_client *client,
 	}
 
 	for (i = 1; i < ADV76XX_PAGE_MAX; ++i) {
+		struct i2c_client *dummy_client;
+
 		if (!(BIT(i) & state->info->page_mask))
 			continue;
 
-		state->i2c_clients[i] = adv76xx_dummy_client(sd, i);
-		if (!state->i2c_clients[i]) {
-			err = -EINVAL;
+		dummy_client = adv76xx_dummy_client(sd, i);
+		if (IS_ERR(dummy_client)) {
+			err = PTR_ERR(dummy_client);
 			v4l2_err(sd, "failed to create i2c client %u\n", i);
 			goto err_i2c;
 		}
+
+		state->i2c_clients[i] = dummy_client;
 	}
 
 	INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug,
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 518945b2f737..2cccd82a3106 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -14,7 +14,6 @@
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/mod_devicetable.h>
-#include <linux/log2.h>
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 #include <linux/property.h>
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index c559f706ae7e..156360e37714 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -48,6 +48,7 @@
 
 /* Includes */
 #include <linux/acpi.h>			/* For ACPI support */
+#include <linux/bits.h>			/* For BIT() */
 #include <linux/module.h>		/* For module specific items */
 #include <linux/moduleparam.h>		/* For new moduleparam's */
 #include <linux/types.h>		/* For standard types (like size_t) */
@@ -215,6 +216,23 @@ static int update_no_reboot_bit_mem(void *priv, bool set)
 	return 0;
 }
 
+static int update_no_reboot_bit_cnt(void *priv, bool set)
+{
+	struct iTCO_wdt_private *p = priv;
+	u16 val, newval;
+
+	val = inw(TCO1_CNT(p));
+	if (set)
+		val |= BIT(0);
+	else
+		val &= ~BIT(0);
+	outw(val, TCO1_CNT(p));
+	newval = inw(TCO1_CNT(p));
+
+	/* make sure the update is successful */
+	return val != newval ? -EIO : 0;
+}
+
 static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
 		struct itco_wdt_platform_data *pdata)
 {
@@ -224,7 +242,9 @@ static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
 		return;
 	}
 
-	if (p->iTCO_version >= 2)
+	if (p->iTCO_version >= 6)
+		p->update_no_reboot_bit = update_no_reboot_bit_cnt;
+	else if (p->iTCO_version >= 2)
 		p->update_no_reboot_bit = update_no_reboot_bit_mem;
 	else if (p->iTCO_version == 1)
 		p->update_no_reboot_bit = update_no_reboot_bit_pci;
@@ -452,7 +472,8 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	 * Get the Memory-Mapped GCS or PMC register, we need it for the
 	 * NO_REBOOT flag (TCO v2 and v3).
 	 */
-	if (p->iTCO_version >= 2 && !pdata->update_no_reboot_bit) {
+	if (p->iTCO_version >= 2 && p->iTCO_version < 6 &&
+	    !pdata->update_no_reboot_bit) {
 		p->gcs_pmc_res = platform_get_resource(pdev,
 						       IORESOURCE_MEM,
 						       ICH_RES_MEM_GCS_PMC);
@@ -502,6 +523,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 
 	/* Clear out the (probably old) status */
 	switch (p->iTCO_version) {
+	case 6:
 	case 5:
 	case 4:
 		outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index c0a78c069117..1361637c369d 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -473,7 +473,7 @@ extern struct i2c_client *
 devm_i2c_new_dummy_device(struct device *dev, struct i2c_adapter *adap, u16 address);
 
 extern struct i2c_client *
-i2c_new_secondary_device(struct i2c_client *client,
+i2c_new_ancillary_device(struct i2c_client *client,
 				const char *name,
 				u16 default_addr);