| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
|
|
xserver's VESA driver's VBE (Vesa BIOS Extensions) code
includes a PanelID probe, which can get a monitor's native
resolution. From this, using CVT formulas, it derives
horizontal sync rate and a vertical refresh rate ranges.
It however, only derives the upper bounds of the ranges, and
the lower bounds cannot de derived. By default, they are set
to hardcoded constants which represent the lowest supported
resolution: 640x480. The constants in vbe.c however, were
not actually derived from forulas, but carried over from
other code from the bad old days, and are not relevant
to flat panel displays. This caused, for example, EEEPC701's
panel, with a native resolution of 800x480, to end up with
a upper bound of the horizontal sync rate that was lower
than the hardcoded lower bound, which of course broke things.
These numbers have been rederived using both my own CVT tool
based on xf86CVTMode(), and using the provided 'cvt' tool
that comes with xserver.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This makes a difference on darwin (and apparently nowhere else)
https://www.gnu.org/s/libtool/manual/libtool.html#Modules-for-libltdl
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
|
|
v2: Slightly more obvious sizing math.
==14882== Invalid write of size 2
==14882== at 0x6750267: VBEGetVBEInfo (vbe.c:400)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
==14882== Address 0x4f32fa8 is 72 bytes inside a block of size 73 alloc'd
==14882== at 0x4A0640D: malloc (vg_replace_malloc.c:236)
==14882== by 0x675024B: VBEGetVBEInfo (vbe.c:398)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
|
|
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Just use memcpy, seriously.
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
|
|
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
|
|
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
|
|
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
|
|
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
|
|
This is a minimal set of patches, to have an usable X Server when
compiling it with symbols hidden by default.
|
|
vbe.c: In function ‘VBEReadPanelID’:
vbe.c:1145: warning: return from incompatible pointer type
|
|
|
|
Reported by Yannick Henault.
|
|
Pass all VBE modes back up to the driver, on the assumption that it
knows how to filter modes intelligently.
|
|
Originally found only in the i810 driver.
|
|
CFLAGS is a user variable, extracted from the environment at configure time
and settable by the user at build time. We must not override this variable.
|
|
|
|
|
|
Get rid of almost all uses of these definitions. They're still defined for
delinquent out-of-tree drivers, and also for the Mesa build. As well as
for miinitext.c. But largely gone.
|
|
XFree86LOADER ifdefs, non-loadable hasn't been supported for a while
now. Remove completely gratuitious REMOVE_LOADER_CHECK_MODULE_INFO
ifdefs surrounding a call to a function added in XFree86 4.1 (!).
Miscellaneous static markings.
|
|
dereferenced many times before.
|
|
of (marginal) use in the drivers, and that usage remains.
|
|
|
|
module builds to reflect this change.
|
|
|
|
|
|
|
|
Add XSERV_t, TRANS_SERVER, TRANS_REOPEN to quash warnings.
Add #include <dix-config.h> or <xorg-config.h>, as appropriate, to all
source files in the xserver/xorg tree, predicated on defines of
HAVE_{DIX,XORG}_CONFIG_H. Change all Xfont includes to
<X11/fonts/foo.h>.
|
|
|
|
|
|
standard mode solely determined by the mode ID or it may be a detailed
mode with almost arbitrary mode parameters. The mode parameters are
passed to the BIOS in a memory area pointed to by es:di. If bit 11 in
the video mode is set this memory area is evaluated. When we don't have
such an area (passed to VBESetVBEMode() this function should unset this
bit for sanity reasons. (Bugzilla #3329)
|
|
change "foo.h" to <X11/foo.h> for core headers, e.g. X.h, Xpoll.h;
change "foo.h", "extensions/foo.h" and "X11/foo.h" to
<X11/extensions/foo.h> for extension headers, e.g. Xv.h;
change "foo.[ch]" to <X11/Xtrans/foo.[ch]> for Xtrans files.
|
|
|
|
build fixes for AMD64.
Made shm* functions in the libc_wrapper more standard conformant by setting
errno correctly.
Use xf86ExendedInitInt10() in VBEExtendedInit() to be able to pass flags.
|
|
IA64 (Egbert Eich).
Fixed wrong function prototype (Egbert Eich).
Don't test for generic VGA on IA64 (Egbert Eich).
Fixed a segfault when accessing a structure before verifying the pointer
exists (Egbert Eich).
Added a showcache option for debugging (Egbert Eich).
Increase default video RAM size to 16MB when DRI is enabled and more than
128MB are available (Egbert Eich). Fixed lockups during mode switch.
Problem was introduced when attempting to copy the behavior during
LeaveVT()/EnterVT() but but forgetting to call I810DRILeave() before
I810DRIEnter(). The entire DRILeave()/Enter() scenario has been
commented out as it didn't seem to be necessary (Egbert Eich).
Fix TweakMemorySize() (tested with i855/i865) (Egbert Eich).
increased MAX_DEVICES to 128 (Egbert Eich).
Use OS provided PCI config space access as default method (Egbert Eich).
Added support for Linux 2.6 proc file format.
Fixed unaligned accesses to pieces of the VBE info block. VESA did not
align elements to size (Egbert Eich).
|
|
|
|
|
|
|
|
|
|
|
