Merging XORG-CURRENT into trunk

1 files changed, 626 insertions, 0 deletions

diff --git a/hw/xfree86/xorgconf.cpp b/hw/xfree86/xorgconf.cpp
new file mode 100644
index 000000000..c94c1e5a4
--- /dev/null
+++ b/hw/xfree86/xorgconf.cpp
@@ -0,0 +1,626 @@
+XCOMM $XdotOrg$
+XCOMM
+XCOMM Copyright (c) 1994-1998 by The XFree86 Project, Inc.
+XCOMM
+XCOMM Permission is hereby granted, free of charge, to any person obtaining a
+XCOMM copy of this software and associated documentation files (the "Software"),
+XCOMM to deal in the Software without restriction, including without limitation
+XCOMM the rights to use, copy, modify, merge, publish, distribute, sublicense,
+XCOMM and/or sell copies of the Software, and to permit persons to whom the
+XCOMM Software is furnished to do so, subject to the following conditions:
+XCOMM 
+XCOMM The above copyright notice and this permission notice shall be included in
+XCOMM all copies or substantial portions of the Software.
+XCOMM 
+XCOMM THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+XCOMM IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+XCOMM FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+XCOMM THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+XCOMM WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+XCOMM OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+XCOMM SOFTWARE.
+XCOMM 
+XCOMM Except as contained in this notice, the name of the XFree86 Project shall
+XCOMM not be used in advertising or otherwise to promote the sale, use or other
+XCOMM dealings in this Software without prior written authorization from the
+XCOMM XFree86 Project.
+XCOMM
+XCOMM $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $
+
+XCOMM **********************************************************************
+XCOMM This is a sample configuration file only, intended to illustrate
+XCOMM what a config file might look like.  Refer to the XF86Config(4/5)
+XCOMM man page for details about the format of this file. This man page
+XCOMM is installed as MANPAGE 
+XCOMM **********************************************************************
+
+XCOMM The ordering of sections is not important in version 4.0 and later.
+
+XCOMM **********************************************************************
+XCOMM Files section.  This allows default font and rgb paths to be set
+XCOMM **********************************************************************
+
+Section "Files"
+
+XCOMM The location of the RGB database.  Note, this is the name of the
+XCOMM file minus the extension (like ".txt" or ".db").  There is normally
+XCOMM no need to change the default.
+
+    RgbPath	RGBPATH
+
+XCOMM Multiple FontPath entries are allowed (which are concatenated together),
+XCOMM as well as specifying multiple comma-separated entries in one FontPath
+XCOMM command (or a combination of both methods)
+
+    FontPath	LOCALFONTPATH
+    FontPath	MISCFONTPATH
+    FontPath	DPI75USFONTPATH
+    FontPath	DPI100USFONTPATH
+    FontPath	T1FONTPATH
+    FontPath    TRUETYPEFONTPATH
+    FontPath	CIDFONTPATH
+    FontPath	SPFONTPATH
+    FontPath	DPI75FONTPATH
+    FontPath	DPI100FONTPATH
+
+XCOMM ModulePath can be used to set a search path for the X server modules.
+XCOMM The default path is shown here.
+
+XCOMM    ModulePath	MODULEPATH
+
+EndSection
+
+XCOMM **********************************************************************
+XCOMM Module section -- this is an optional section which is used to specify
+XCOMM which run-time loadable modules to load when the X server starts up.
+XCOMM **********************************************************************
+
+Section "Module"
+
+XCOMM This loads the DBE extension module.
+
+    Load	"dbe"
+
+XCOMM This loads the miscellaneous extensions module, and disables
+XCOMM initialisation of the XFree86-DGA extension within that module.
+
+    SubSection	"extmod"
+	Option	"omit xfree86-dga"
+    EndSubSection
+
+XCOMM This loads the Type1 and FreeType font modules
+
+    Load	"type1"
+    Load	"freetype"
+
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM Server flags section.  This contains various server-wide Options.
+XCOMM **********************************************************************
+
+Section "ServerFlags"
+
+XCOMM Uncomment this to cause a core dump at the spot where a signal is 
+XCOMM received.  This may leave the console in an unusable state, but may
+XCOMM provide a better stack trace in the core dump to aid in debugging
+
+XCOMM    Option	"NoTrapSignals"
+
+XCOMM Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
+XCOMM (where n is 1 through 12).  This allows clients to receive these key
+XCOMM events.
+
+XCOMM    Option	"DontVTSwitch"
+
+XCOMM Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
+XCOMM This allows clients to receive this key event.
+
+XCOMM    Option	"DontZap"
+
+XCOMM Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
+XCOMM sequences.  This allows clients to receive these key events.
+
+XCOMM    Option	"DontZoom"
+
+XCOMM Uncomment this to disable tuning with the xvidtune client. With
+XCOMM it the client can still run and fetch card and monitor attributes,
+XCOMM but it will not be allowed to change them. If it tries it will
+XCOMM receive a protocol error.
+
+XCOMM    Option	"DisableVidModeExtension"
+
+XCOMM Uncomment this to enable the use of a non-local xvidtune client.
+
+XCOMM    Option	"AllowNonLocalXvidtune"
+
+XCOMM Uncomment this to disable dynamically modifying the input device
+XCOMM (mouse and keyboard) settings.
+
+XCOMM    Option	"DisableModInDev"
+
+XCOMM Uncomment this to enable the use of a non-local client to
+XCOMM change the keyboard or mouse settings (currently only xset).
+
+XCOMM    Option	"AllowNonLocalModInDev"
+
+XCOMM Set the basic blanking screen saver timeout.
+
+    Option	"blank time"	"10"	# 10 minutes
+
+XCOMM Set the DPMS timeouts.  These are set here because they are global
+XCOMM rather than screen-specific.  These settings alone don't enable DPMS.
+XCOMM It is enabled per-screen (or per-monitor), and even then only when
+XCOMM the driver supports it.
+
+    Option	"standby time"	"20"
+    Option	"suspend time"	"30"
+    Option	"off time"	"60"
+
+XCOMM On some platform the server needs to estimate the sizes of PCI
+XCOMM memory and pio ranges. This is done by assuming that PCI ranges
+XCOMM don't overlap. Some broken BIOSes tend to set ranges of inactive
+XCOMM devices wrong. Here one can adjust how aggressive the assumptions
+XCOMM should be. Default is 0.
+
+XCOMM Option   "EstimateSizesAggresively" "0"
+
+EndSection
+
+XCOMM **********************************************************************
+XCOMM Input devices
+XCOMM **********************************************************************
+
+XCOMM **********************************************************************
+XCOMM Core keyboard's InputDevice section
+XCOMM **********************************************************************
+
+Section "InputDevice"
+
+    Identifier	"Keyboard1"
+    Driver	"keyboard"
+
+XCOMM For most OSs the protocol can be omitted (it defaults to "Standard").
+XCOMM When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment
+XCOMM out the above line, and uncomment the following line.
+
+XCOMM    Option	"Protocol"	"Xqueue"
+
+XCOMM Set the keyboard auto repeat parameters.  Not all platforms implement
+XCOMM this.
+
+    Option	"AutoRepeat"	"500 5"
+
+XCOMM Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
+
+XCOMM    Option	"Xleds"	"1 2 3"
+
+XCOMM To disable the XKEYBOARD extension, uncomment XkbDisable.
+
+XCOMM    Option	"XkbDisable"
+
+XCOMM To customise the XKB settings to suit your keyboard, modify the
+XCOMM lines below (which are the defaults).  For example, for a European
+XCOMM keyboard, you will probably want to use one of:
+XCOMM
+XCOMM    Option	"XkbModel"	"pc102"
+XCOMM    Option	"XkbModel"	"pc105"
+XCOMM
+XCOMM If you have a Microsoft Natural keyboard, you can use:
+XCOMM
+XCOMM    Option	"XkbModel"	"microsoft"
+XCOMM
+XCOMM If you have a US "windows" keyboard you will want:
+XCOMM
+XCOMM    Option	"XkbModel"	"pc104"
+XCOMM
+XCOMM Then to change the language, change the Layout setting.
+XCOMM For example, a german layout can be obtained with:
+XCOMM
+XCOMM    Option	"XkbLayout"	"de"
+XCOMM
+XCOMM or:
+XCOMM
+XCOMM    Option	"XkbLayout"	"de"
+XCOMM    Option	"XkbVariant"	"nodeadkeys"
+XCOMM
+XCOMM If you'd like to switch the positions of your capslock and
+XCOMM control keys, use:
+XCOMM
+XCOMM    Option	"XkbOptions"	"ctrl:swapcaps"
+
+
+XCOMM These are the default XKB settings for xorg
+XCOMM
+XCOMM    Option	"XkbRules"	"xorg"
+XCOMM    Option	"XkbModel"	"pc101"
+XCOMM    Option	"XkbLayout"	"us"
+XCOMM    Option	"XkbVariant"	""
+XCOMM    Option	"XkbOptions"	""
+
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM Core Pointer's InputDevice section
+XCOMM **********************************************************************
+
+Section "InputDevice"
+
+XCOMM Identifier and driver
+
+    Identifier	"Mouse1"
+    Driver	"mouse"
+
+XCOMM The mouse protocol and device.  The device is normally set to /dev/mouse,
+XCOMM which is usually a symbolic link to the real device.
+
+    Option	"Protocol"	"Microsoft"
+    Option	"Device"	"/dev/mouse"
+
+XCOMM On platforms where PnP mouse detection is supported the following
+XCOMM protocol setting can be used when using a newer PnP mouse:
+
+XCOMM    Option	"Protocol"	"Auto"
+
+XCOMM When using mouse connected to a PS/2 port (aka "MousePort"), set the
+XCOMM the protocol as follows.  On some platforms some other settings may
+XCOMM be available.
+
+XCOMM    Option "Protocol"	"PS/2"
+
+XCOMM When using XQUEUE (only for SVR3 and SVR4, but not Solaris), use
+XCOMM the following instead of any of the lines above.  The Device line
+XCOMM is not required in this case.
+
+XCOMM    Option	"Protocol"	"Xqueue"
+
+XCOMM Baudrate and SampleRate are only for some older Logitech mice.  In
+XCOMM almost every case these lines should be omitted.
+
+XCOMM    Option	"BaudRate"	"9600"
+XCOMM    Option	"SampleRate"	"150"
+
+XCOMM Emulate3Buttons is an option for 2-button mice
+XCOMM Emulate3Timeout is the timeout in milliseconds (default is 50ms)
+
+XCOMM    Option	"Emulate3Buttons"
+XCOMM    Option	"Emulate3Timeout"	"50"
+
+XCOMM ChordMiddle is an option for some 3-button Logitech mice, or any
+XCOMM 3-button mouse where the middle button generates left+right button
+XCOMM events.
+
+XCOMM    Option	"ChordMiddle"
+
+EndSection
+
+Section "InputDevice"
+    Identifier	"Mouse2"
+    Driver	"mouse"
+    Option	"Protocol"	"MouseMan"
+    Option	"Device"	"/dev/mouse2"
+EndSection
+
+XCOMM Some examples of extended input devices
+
+XCOMM Section "InputDevice"
+XCOMM    Identifier	"spaceball"
+XCOMM    Driver	"magellan"
+XCOMM    Option	"Device"	"/dev/cua0"
+XCOMM EndSection
+XCOMM
+XCOMM Section "InputDevice"
+XCOMM    Identifier	"spaceball2"
+XCOMM    Driver	"spaceorb"
+XCOMM    Option	"Device"	"/dev/cua0"
+XCOMM EndSection
+XCOMM
+XCOMM Section "InputDevice"
+XCOMM    Identifier	"touchscreen0"
+XCOMM    Driver	"microtouch"
+XCOMM    Option	"Device"	"/dev/ttyS0"
+XCOMM    Option	"MinX"		"1412"
+XCOMM    Option	"MaxX"		"15184"
+XCOMM    Option	"MinY"		"15372"
+XCOMM    Option	"MaxY"		"1230"
+XCOMM    Option	"ScreenNumber"	"0"
+XCOMM    Option	"ReportingMode"	"Scaled"
+XCOMM    Option	"ButtonNumber"	"1"
+XCOMM    Option	"SendCoreEvents"
+XCOMM EndSection
+XCOMM
+XCOMM Section "InputDevice"
+XCOMM    Identifier	"touchscreen1"
+XCOMM    Driver	"elo2300"
+XCOMM    Option	"Device"	"/dev/ttyS0"
+XCOMM    Option	"MinX"		"231"
+XCOMM    Option	"MaxX"		"3868"
+XCOMM    Option	"MinY"		"3858"
+XCOMM    Option	"MaxY"		"272"
+XCOMM    Option	"ScreenNumber"	"0"
+XCOMM    Option	"ReportingMode"	"Scaled"
+XCOMM    Option	"ButtonThreshold"	"17"
+XCOMM    Option	"ButtonNumber"	"1"
+XCOMM    Option	"SendCoreEvents"
+XCOMM EndSection
+
+XCOMM **********************************************************************
+XCOMM Monitor section
+XCOMM **********************************************************************
+
+XCOMM Any number of monitor sections may be present
+
+Section "Monitor"
+
+XCOMM The identifier line must be present.
+
+    Identifier	"Generic Monitor"
+
+XCOMM HorizSync is in kHz unless units are specified.
+XCOMM HorizSync may be a comma separated list of discrete values, or a
+XCOMM comma separated list of ranges of values.
+XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
+XCOMM USER MANUAL FOR THE CORRECT NUMBERS.
+
+XCOMM    HorizSync	31.5  # typical for a single frequency fixed-sync monitor
+XCOMM    HorizSync	30-64         # multisync
+XCOMM    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
+XCOMM    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
+
+XCOMM VertRefresh is in Hz unless units are specified.
+XCOMM VertRefresh may be a comma separated list of discrete values, or a
+XCOMM comma separated list of ranges of values.
+XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
+XCOMM USER MANUAL FOR THE CORRECT NUMBERS.
+
+XCOMM    VertRefresh	60  # typical for a single frequency fixed-sync monitor
+
+XCOMM    VertRefresh	50-100        # multisync
+XCOMM    VertRefresh	60, 65        # multiple fixed sync frequencies
+XCOMM    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies
+
+XCOMM Modes can be specified in two formats.  A compact one-line format, or
+XCOMM a multi-line format.
+
+XCOMM A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
+XCOMM These two are equivalent
+
+XCOMM    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
+
+    Mode "640x480"
+        DotClock	25.175
+        HTimings	640 664 760 800
+        VTimings	480 491 493 525
+    EndMode
+
+XCOMM These two are equivalent
+
+XCOMM    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
+
+XCOMM    Mode "1024x768i"
+XCOMM        DotClock	45
+XCOMM        HTimings	1024 1048 1208 1264
+XCOMM        VTimings	768 776 784 817
+XCOMM        Flags		"Interlace"
+XCOMM    EndMode
+
+XCOMM If a monitor has DPMS support, that can be indicated here.  This will
+XCOMM enable DPMS when the monitor is used with drivers that support it.
+
+XCOMM    Option	"dpms"
+
+XCOMM If a monitor requires that the sync signals be superimposed on the
+XCOMM green signal, the following option will enable this when used with
+XCOMM drivers that support it.  Only a relatively small range of hardware
+XCOMM (and drivers) actually support this.
+
+XCOMM    Option	"sync on green"
+
+EndSection
+
+XCOMM **********************************************************************
+XCOMM Graphics device section
+XCOMM **********************************************************************
+
+XCOMM Any number of graphics device sections may be present
+
+Section "Device"
+
+XCOMM The Identifier must be present.
+
+    Identifier	"Generic VGA"
+
+XCOMM The Driver line must be present.  When using run-time loadable driver
+XCOMM modules, this line instructs the server to load the specified driver
+XCOMM module.  Even when not using loadable driver modules, this line
+XCOMM indicates which driver should interpret the information in this section.
+
+    Driver	"vga"
+
+XCOMM The chipset line is optional in most cases.  It can be used to override
+XCOMM the driver's chipset detection, and should not normally be specified.
+
+XCOMM    Chipset	"generic"
+
+XCOMM Various other lines can be specified to override the driver's automatic
+XCOMM detection code.  In most cases they are not needed.
+
+XCOMM    VideoRam	256
+XCOMM    Clocks	25.2 28.3
+
+XCOMM The BusID line is used to specify which of possibly multiple devices
+XCOMM this section is intended for.  When this line isn't present, a device
+XCOMM section can only match up with the primary video device.  For PCI
+XCOMM devices a line like the following could be used.  This line should not
+XCOMM normally be included unless there is more than one video device
+XCOMM intalled.
+
+XCOMM    BusID	"PCI:0:10:0"
+
+XCOMM Various option lines can be added here as required.  Some options
+XCOMM are more appropriate in Screen sections, Display subsections or even
+XCOMM Monitor sections.
+
+XCOMM    Option	"hw cursor" "off"
+
+EndSection
+
+Section "Device"
+    Identifier	"any supported Trident chip"
+    Driver	"trident"
+EndSection
+
+Section "Device"
+    Identifier	"MGA Millennium I"
+    Driver	"mga"
+    Option	"hw cursor" "off"
+    BusID	"PCI:0:10:0"
+EndSection
+
+Section "Device"
+    Identifier	"MGA G200 AGP"
+    Driver	"mga"
+    BusID	"PCI:1:0:0"
+    Option	"pci retry"
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM Screen sections.
+XCOMM **********************************************************************
+
+XCOMM Any number of screen sections may be present.  Each describes
+XCOMM the configuration of a single screen.  A single specific screen section
+XCOMM may be specified from the X server command line with the "-screen"
+XCOMM option.
+
+Section "Screen"
+
+XCOMM The Identifier, Device and Monitor lines must be present
+
+    Identifier	"Screen 1"
+    Device	"Generic VGA"
+    Monitor	"Generic Monitor"
+
+XCOMM The favoured Depth and/or Bpp may be specified here
+
+    DefaultDepth 8
+
+    SubSection "Display"
+        Depth		8
+        Modes		"640x480"
+        ViewPort	0 0
+        Virtual 	800 600
+    EndSubsection
+
+    SubSection "Display"
+	Depth		4
+        Modes		"640x480"
+    EndSubSection
+
+    SubSection "Display"
+	Depth		1
+        Modes		"640x480"
+    EndSubSection
+
+EndSection
+
+
+Section "Screen"
+    Identifier		"Screen MGA1"
+    Device		"MGA Millennium I"
+    Monitor		"Generic Monitor"
+    Option		"no accel"
+    DefaultDepth	16
+XCOMM    DefaultDepth	24
+
+    SubSection "Display"
+	Depth		8
+	Modes		"1280x1024"
+	Option		"rgb bits" "8"
+	Visual		"StaticColor"
+    EndSubSection
+    SubSection "Display"
+	Depth		16
+	Modes		"1280x1024"
+    EndSubSection
+    SubSection "Display"
+	Depth		24
+	Modes		"1280x1024"
+    EndSubSection
+EndSection
+
+
+Section "Screen"
+    Identifier		"Screen MGA2"
+    Device		"MGA G200 AGP"
+    Monitor		"Generic Monitor"
+    DefaultDepth	8
+
+    SubSection "Display"
+	Depth		8
+	Modes		"1280x1024"
+	Option		"rgb bits" "8"
+	Visual		"StaticColor"
+    EndSubSection
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM ServerLayout sections.
+XCOMM **********************************************************************
+
+XCOMM Any number of ServerLayout sections may be present.  Each describes
+XCOMM the way multiple screens are organised.  A specific ServerLayout
+XCOMM section may be specified from the X server command line with the
+XCOMM "-layout" option.  In the absence of this, the first section is used.
+XCOMM When now ServerLayout section is present, the first Screen section
+XCOMM is used alone.
+
+Section "ServerLayout"
+
+XCOMM The Identifier line must be present
+
+    Identifier	"Main Layout"
+
+XCOMM Each Screen line specifies a Screen section name, and optionally
+XCOMM the relative position of other screens.  The four names after
+XCOMM primary screen name are the screens to the top, bottom, left and right
+XCOMM of the primary screen.  In this example, screen 2 is located to the
+XCOMM right of screen 1.
+
+    Screen	"Screen MGA 1"	""	""	""	"Screen MGA 2"
+    Screen	"Screen MGA 2"	""	""	"Screen MGA 1"	""
+
+XCOMM Each InputDevice line specifies an InputDevice section name and
+XCOMM optionally some options to specify the way the device is to be
+XCOMM used.  Those options include "CorePointer", "CoreKeyboard" and
+XCOMM "SendCoreEvents".  In this example, "Mouse1" is the core pointer,
+XCOMM and "Mouse2" is an extended input device that also generates core
+XCOMM pointer events (i.e., both mice will move the standard pointer).
+
+    InputDevice	"Mouse1" "CorePointer"
+    InputDevice	"Mouse2" "SendCoreEvents"
+    InputDevice "Keyboard1" "CoreKeyboard"
+
+EndSection
+
+
+Section "ServerLayout"
+    Identifier	"another layout"
+    Screen	"Screen 1"
+    Screen	"Screen MGA 1"
+    InputDevice	"Mouse1" "CorePointer"
+    InputDevice "Keyboard1" "CoreKeyboard"
+EndSection
+
+
+Section "ServerLayout"
+    Identifier	"simple layout"
+    Screen	"Screen 1"
+    InputDevice	"Mouse1" "CorePointer"
+    InputDevice "Keyboard1" "CoreKeyboard"
+EndSection
+