diff options
Diffstat (limited to 'drivers/ide/sgiioc4.c')
| -rw-r--r-- | drivers/ide/sgiioc4.c | 674 |
1 files changed, 674 insertions, 0 deletions
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c new file mode 100644 index 000000000000..8af9b23499fd --- /dev/null +++ b/drivers/ide/sgiioc4.c @@ -0,0 +1,674 @@ +/* + * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2008 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * For further information regarding this notice, see: + * + * http://oss.sgi.com/projects/GenInfo/NoticeExplan + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/scatterlist.h> +#include <linux/ioc4.h> +#include <asm/io.h> + +#include <linux/ide.h> + +#define DRV_NAME "SGIIOC4" + +/* IOC4 Specific Definitions */ +#define IOC4_CMD_OFFSET 0x100 +#define IOC4_CTRL_OFFSET 0x120 +#define IOC4_DMA_OFFSET 0x140 +#define IOC4_INTR_OFFSET 0x0 + +#define IOC4_TIMING 0x00 +#define IOC4_DMA_PTR_L 0x01 +#define IOC4_DMA_PTR_H 0x02 +#define IOC4_DMA_ADDR_L 0x03 +#define IOC4_DMA_ADDR_H 0x04 +#define IOC4_BC_DEV 0x05 +#define IOC4_BC_MEM 0x06 +#define IOC4_DMA_CTRL 0x07 +#define IOC4_DMA_END_ADDR 0x08 + +/* Bits in the IOC4 Control/Status Register */ +#define IOC4_S_DMA_START 0x01 +#define IOC4_S_DMA_STOP 0x02 +#define IOC4_S_DMA_DIR 0x04 +#define IOC4_S_DMA_ACTIVE 0x08 +#define IOC4_S_DMA_ERROR 0x10 +#define IOC4_ATA_MEMERR 0x02 + +/* Read/Write Directions */ +#define IOC4_DMA_WRITE 0x04 +#define IOC4_DMA_READ 0x00 + +/* Interrupt Register Offsets */ +#define IOC4_INTR_REG 0x03 +#define IOC4_INTR_SET 0x05 +#define IOC4_INTR_CLEAR 0x07 + +#define IOC4_IDE_CACHELINE_SIZE 128 +#define IOC4_CMD_CTL_BLK_SIZE 0x20 +#define IOC4_SUPPORTED_FIRMWARE_REV 46 + +typedef struct { + u32 timing_reg0; + u32 timing_reg1; + u32 low_mem_ptr; + u32 high_mem_ptr; + u32 low_mem_addr; + u32 high_mem_addr; + u32 dev_byte_count; + u32 mem_byte_count; + u32 status; +} ioc4_dma_regs_t; + +/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */ +/* IOC4 has only 1 IDE channel */ +#define IOC4_PRD_BYTES 16 +#define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES)) + + +static void +sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, + unsigned long ctrl_port, unsigned long irq_port) +{ + unsigned long reg = data_port; + int i; + + /* Registers are word (32 bit) aligned */ + for (i = 0; i <= 7; i++) + hw->io_ports_array[i] = reg + i * 4; + + hw->io_ports.ctl_addr = ctrl_port; + hw->io_ports.irq_addr = irq_port; +} + +static int +sgiioc4_checkirq(ide_hwif_t * hwif) +{ + unsigned long intr_addr = + hwif->io_ports.irq_addr + IOC4_INTR_REG * 4; + + if ((u8)readl((void __iomem *)intr_addr) & 0x03) + return 1; + + return 0; +} + +static u8 sgiioc4_read_status(ide_hwif_t *); + +static int +sgiioc4_clearirq(ide_drive_t * drive) +{ + u32 intr_reg; + ide_hwif_t *hwif = HWIF(drive); + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2); + + /* Code to check for PCI error conditions */ + intr_reg = readl((void __iomem *)other_ir); + if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */ + /* + * Using sgiioc4_read_status to read the Status register has a + * side effect of clearing the interrupt. The first read should + * clear it if it is set. The second read should return + * a "clear" status if it got cleared. If not, then spin + * for a bit trying to clear it. + */ + u8 stat = sgiioc4_read_status(hwif); + int count = 0; + + stat = sgiioc4_read_status(hwif); + while ((stat & ATA_BUSY) && (count++ < 100)) { + udelay(1); + stat = sgiioc4_read_status(hwif); + } + + if (intr_reg & 0x02) { + struct pci_dev *dev = to_pci_dev(hwif->dev); + /* Error when transferring DMA data on PCI bus */ + u32 pci_err_addr_low, pci_err_addr_high, + pci_stat_cmd_reg; + + pci_err_addr_low = + readl((void __iomem *)io_ports->irq_addr); + pci_err_addr_high = + readl((void __iomem *)(io_ports->irq_addr + 4)); + pci_read_config_dword(dev, PCI_COMMAND, + &pci_stat_cmd_reg); + printk(KERN_ERR + "%s(%s) : PCI Bus Error when doing DMA:" + " status-cmd reg is 0x%x\n", + __func__, drive->name, pci_stat_cmd_reg); + printk(KERN_ERR + "%s(%s) : PCI Error Address is 0x%x%x\n", + __func__, drive->name, + pci_err_addr_high, pci_err_addr_low); + /* Clear the PCI Error indicator */ + pci_write_config_dword(dev, PCI_COMMAND, 0x00000146); + } + + /* Clear the Interrupt, Error bits on the IOC4 */ + writel(0x03, (void __iomem *)other_ir); + + intr_reg = readl((void __iomem *)other_ir); + } + + return intr_reg & 3; +} + +static void sgiioc4_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4; + unsigned int reg = readl((void __iomem *)ioc4_dma_addr); + unsigned int temp_reg = reg | IOC4_S_DMA_START; + + writel(temp_reg, (void __iomem *)ioc4_dma_addr); +} + +static u32 +sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) +{ + unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4; + u32 ioc4_dma; + int count; + + count = 0; + ioc4_dma = readl((void __iomem *)ioc4_dma_addr); + while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) { + udelay(1); + ioc4_dma = readl((void __iomem *)ioc4_dma_addr); + } + return ioc4_dma; +} + +/* Stops the IOC4 DMA Engine */ +static int sgiioc4_dma_end(ide_drive_t *drive) +{ + u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0; + ide_hwif_t *hwif = HWIF(drive); + unsigned long dma_base = hwif->dma_base; + int dma_stat = 0; + unsigned long *ending_dma = ide_get_hwifdata(hwif); + + writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4)); + + ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); + + if (ioc4_dma & IOC4_S_DMA_STOP) { + printk(KERN_ERR + "%s(%s): IOC4 DMA STOP bit is still 1 :" + "ioc4_dma_reg 0x%x\n", + __func__, drive->name, ioc4_dma); + dma_stat = 1; + } + + /* + * The IOC4 will DMA 1's to the ending dma area to indicate that + * previous data DMA is complete. This is necessary because of relaxed + * ordering between register reads and DMA writes on the Altix. + */ + while ((cnt++ < 200) && (!valid)) { + for (num = 0; num < 16; num++) { + if (ending_dma[num]) { + valid = 1; + break; + } + } + udelay(1); + } + if (!valid) { + printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__, + drive->name); + dma_stat = 1; + } + + bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4)); + bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4)); + + if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) { + if (bc_dev > bc_mem + 8) { + printk(KERN_ERR + "%s(%s): WARNING!! byte_count_dev %d " + "!= byte_count_mem %d\n", + __func__, drive->name, bc_dev, bc_mem); + } + } + + drive->waiting_for_dma = 0; + ide_destroy_dmatable(drive); + + return dma_stat; +} + +static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ +} + +/* returns 1 if dma irq issued, 0 otherwise */ +static int sgiioc4_dma_test_irq(ide_drive_t *drive) +{ + return sgiioc4_checkirq(HWIF(drive)); +} + +static void sgiioc4_dma_host_set(ide_drive_t *drive, int on) +{ + if (!on) + sgiioc4_clearirq(drive); +} + +static void +sgiioc4_resetproc(ide_drive_t * drive) +{ + sgiioc4_dma_end(drive); + sgiioc4_clearirq(drive); +} + +static void +sgiioc4_dma_lost_irq(ide_drive_t * drive) +{ + sgiioc4_resetproc(drive); + + ide_dma_lost_irq(drive); +} + +static u8 sgiioc4_read_status(ide_hwif_t *hwif) +{ + unsigned long port = hwif->io_ports.status_addr; + u8 reg = (u8) readb((void __iomem *) port); + + if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */ + unsigned long other_ir = port - 0x110; + unsigned int intr_reg = (u32) readl((void __iomem *) other_ir); + + /* Clear the Interrupt, Error bits on the IOC4 */ + if (intr_reg & 0x03) { + writel(0x03, (void __iomem *) other_ir); + intr_reg = (u32) readl((void __iomem *) other_ir); + } + } + + return reg; +} + +/* Creates a dma map for the scatter-gather list entries */ +static int __devinit +ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; + int num_ports = sizeof (ioc4_dma_regs_t); + void *pad; + + printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); + + if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) { + printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx " + "already in use\n", __func__, hwif->name, + dma_base, dma_base + num_ports - 1); + return -1; + } + + hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr + + IOC4_DMA_OFFSET; + + hwif->sg_max_nents = IOC4_PRD_ENTRIES; + + hwif->prd_max_nents = IOC4_PRD_ENTRIES; + hwif->prd_ent_size = IOC4_PRD_BYTES; + + if (ide_allocate_dma_engine(hwif)) + goto dma_pci_alloc_failure; + + pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE, + (dma_addr_t *)&hwif->extra_base); + if (pad) { + ide_set_hwifdata(hwif, pad); + return 0; + } + + ide_release_dma_engine(hwif); + + printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n", + __func__, hwif->name); + printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name); + +dma_pci_alloc_failure: + release_mem_region(dma_base, num_ports); + + return -1; +} + +/* Initializes the IOC4 DMA Engine */ +static void +sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) +{ + u32 ioc4_dma; + ide_hwif_t *hwif = HWIF(drive); + unsigned long dma_base = hwif->dma_base; + unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4; + u32 dma_addr, ending_dma_addr; + + ioc4_dma = readl((void __iomem *)ioc4_dma_addr); + + if (ioc4_dma & IOC4_S_DMA_ACTIVE) { + printk(KERN_WARNING + "%s(%s):Warning!! DMA from previous transfer was still active\n", + __func__, drive->name); + writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); + ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); + + if (ioc4_dma & IOC4_S_DMA_STOP) + printk(KERN_ERR + "%s(%s) : IOC4 Dma STOP bit is still 1\n", + __func__, drive->name); + } + + ioc4_dma = readl((void __iomem *)ioc4_dma_addr); + if (ioc4_dma & IOC4_S_DMA_ERROR) { + printk(KERN_WARNING + "%s(%s) : Warning!! - DMA Error during Previous" + " transfer | status 0x%x\n", + __func__, drive->name, ioc4_dma); + writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); + ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); + + if (ioc4_dma & IOC4_S_DMA_STOP) + printk(KERN_ERR + "%s(%s) : IOC4 DMA STOP bit is still 1\n", + __func__, drive->name); + } + + /* Address of the Scatter Gather List */ + dma_addr = cpu_to_le32(hwif->dmatable_dma); + writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4)); + + /* Address of the Ending DMA */ + memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); + ending_dma_addr = cpu_to_le32(hwif->extra_base); + writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4)); + + writel(dma_direction, (void __iomem *)ioc4_dma_addr); + drive->waiting_for_dma = 1; +} + +/* IOC4 Scatter Gather list Format */ +/* 128 Bit entries to support 64 bit addresses in the future */ +/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */ +/* --------------------------------------------------------------------- */ +/* | Upper 32 bits - Zero | Lower 32 bits- address | */ +/* --------------------------------------------------------------------- */ +/* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */ +/* --------------------------------------------------------------------- */ +/* Creates the scatter gather list, DMA Table */ +static unsigned int +sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned int *table = hwif->dmatable_cpu; + unsigned int count = 0, i = 1; + struct scatterlist *sg; + + hwif->sg_nents = i = ide_build_sglist(drive, rq); + + if (!i) + return 0; /* sglist of length Zero */ + + sg = hwif->sg_table; + while (i && sg_dma_len(sg)) { + dma_addr_t cur_addr; + int cur_len; + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); + + while (cur_len) { + if (count++ >= IOC4_PRD_ENTRIES) { + printk(KERN_WARNING + "%s: DMA table too small\n", + drive->name); + goto use_pio_instead; + } else { + u32 bcount = + 0x10000 - (cur_addr & 0xffff); + + if (bcount > cur_len) + bcount = cur_len; + + /* put the addr, length in + * the IOC4 dma-table format */ + *table = 0x0; + table++; + *table = cpu_to_be32(cur_addr); + table++; + *table = 0x0; + table++; + + *table = cpu_to_be32(bcount); + table++; + + cur_addr += bcount; + cur_len -= bcount; + } + } + + sg = sg_next(sg); + i--; + } + + if (count) { + table--; + *table |= cpu_to_be32(0x80000000); + return count; + } + +use_pio_instead: + ide_destroy_dmatable(drive); + + return 0; /* revert to PIO for this request */ +} + +static int sgiioc4_dma_setup(ide_drive_t *drive) +{ + struct request *rq = HWGROUP(drive)->rq; + unsigned int count = 0; + int ddir; + + if (rq_data_dir(rq)) + ddir = PCI_DMA_TODEVICE; + else + ddir = PCI_DMA_FROMDEVICE; + + if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) { + /* try PIO instead of DMA */ + ide_map_sg(drive, rq); + return 1; + } + + if (rq_data_dir(rq)) + /* Writes TO the IOC4 FROM Main Memory */ + ddir = IOC4_DMA_READ; + else + /* Writes FROM the IOC4 TO Main Memory */ + ddir = IOC4_DMA_WRITE; + + sgiioc4_configure_for_dma(ddir, drive); + + return 0; +} + +static const struct ide_tp_ops sgiioc4_tp_ops = { + .exec_command = ide_exec_command, + .read_status = sgiioc4_read_status, + .read_altstatus = ide_read_altstatus, + .read_sff_dma_status = ide_read_sff_dma_status, + + .set_irq = ide_set_irq, + + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; + +static const struct ide_port_ops sgiioc4_port_ops = { + .set_dma_mode = sgiioc4_set_dma_mode, + /* reset DMA engine, clear IRQs */ + .resetproc = sgiioc4_resetproc, +}; + +static const struct ide_dma_ops sgiioc4_dma_ops = { + .dma_host_set = sgiioc4_dma_host_set, + .dma_setup = sgiioc4_dma_setup, + .dma_start = sgiioc4_dma_start, + .dma_end = sgiioc4_dma_end, + .dma_test_irq = sgiioc4_dma_test_irq, + .dma_lost_irq = sgiioc4_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_port_info sgiioc4_port_info __devinitdata = { + .name = DRV_NAME, + .chipset = ide_pci, + .init_dma = ide_dma_sgiioc4, + .tp_ops = &sgiioc4_tp_ops, + .port_ops = &sgiioc4_port_ops, + .dma_ops = &sgiioc4_dma_ops, + .host_flags = IDE_HFLAG_MMIO, + .mwdma_mask = ATA_MWDMA2_ONLY, +}; + +static int __devinit +sgiioc4_ide_setup_pci_device(struct pci_dev *dev) +{ + unsigned long cmd_base, irqport; + unsigned long bar0, cmd_phys_base, ctl; + void __iomem *virt_base; + struct ide_host *host; + hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_port_info d = sgiioc4_port_info; + int rc; + + /* Get the CmdBlk and CtrlBlk Base Registers */ + bar0 = pci_resource_start(dev, 0); + virt_base = ioremap(bar0, pci_resource_len(dev, 0)); + if (virt_base == NULL) { + printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n", + DRV_NAME, bar0); + return -ENOMEM; + } + cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; + ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; + irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; + + cmd_phys_base = bar0 + IOC4_CMD_OFFSET; + if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, + DRV_NAME) == NULL) { + printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx " + "already in use\n", DRV_NAME, pci_name(dev), + cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); + return -EBUSY; + } + + /* Initialize the IO registers */ + memset(&hw, 0, sizeof(hw)); + sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport); + hw.irq = dev->irq; + hw.chipset = ide_pci; + hw.dev = &dev->dev; + + /* Initializing chipset IRQ Registers */ + writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); + + host = ide_host_alloc(&d, hws); + if (host == NULL) { + rc = -ENOMEM; + goto err; + } + + rc = ide_host_register(host, &d, hws); + if (rc) + goto err_free; + + return 0; +err_free: + ide_host_free(host); +err: + release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE); + iounmap(virt_base); + return rc; +} + +static unsigned int __devinit +pci_init_sgiioc4(struct pci_dev *dev) +{ + int ret; + + printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n", + DRV_NAME, pci_name(dev), dev->revision); + + if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) { + printk(KERN_ERR "Skipping %s IDE controller in slot %s: " + "firmware is obsolete - please upgrade to " + "revision46 or higher\n", + DRV_NAME, pci_name(dev)); + ret = -EAGAIN; + goto out; + } + ret = sgiioc4_ide_setup_pci_device(dev); +out: + return ret; +} + +int +ioc4_ide_attach_one(struct ioc4_driver_data *idd) +{ + /* PCI-RT does not bring out IDE connection. + * Do not attach to this particular IOC4. + */ + if (idd->idd_variant == IOC4_VARIANT_PCI_RT) + return 0; + + return pci_init_sgiioc4(idd->idd_pdev); +} + +static struct ioc4_submodule ioc4_ide_submodule = { + .is_name = "IOC4_ide", + .is_owner = THIS_MODULE, + .is_probe = ioc4_ide_attach_one, +/* .is_remove = ioc4_ide_remove_one, */ +}; + +static int __init ioc4_ide_init(void) +{ + return ioc4_register_submodule(&ioc4_ide_submodule); +} + +late_initcall(ioc4_ide_init); /* Call only after IDE init is done */ + +MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); +MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card"); +MODULE_LICENSE("GPL"); |