diff options
| -rw-r--r-- | drivers/scsi/aic94xx/aic94xx_init.c | 3 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_discover.c | 11 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_scsi_host.c | 342 | ||||
| -rw-r--r-- | include/scsi/libsas.h | 12 |
4 files changed, 366 insertions, 2 deletions
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 1c0d7578e791..b9cf46078fc6 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -81,6 +81,9 @@ static struct scsi_host_template aic94xx_sht = { .use_clustering = ENABLE_CLUSTERING, .eh_device_reset_handler = sas_eh_device_reset_handler, .eh_bus_reset_handler = sas_eh_bus_reset_handler, + .slave_alloc = sas_slave_alloc, + .target_destroy = sas_target_destroy, + .ioctl = sas_ioctl, }; static int __devinit asd_map_memio(struct asd_ha_struct *asd_ha) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index a65598b1e536..5252143b6297 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -255,6 +255,7 @@ static int sas_get_port_device(struct asd_sas_port *port) switch (dev->dev_type) { case SAS_END_DEV: + case SATA_DEV: rphy = sas_end_device_alloc(port->port); break; case EDGE_DEV: @@ -265,7 +266,6 @@ static int sas_get_port_device(struct asd_sas_port *port) rphy = sas_expander_alloc(port->port, SAS_FANOUT_EXPANDER_DEVICE); break; - case SATA_DEV: default: printk("ERROR: Unidentified device type %d\n", dev->dev_type); rphy = NULL; @@ -480,7 +480,14 @@ cont1: present. sas_satl_register_dev(dev); */ - return 0; + + sas_fill_in_rphy(dev, dev->rphy); + + res = sas_rphy_add(dev->rphy); + if (res) + goto out_err; + + return res; out_err: dev->sata_dev.identify_packet_device = NULL; dev->sata_dev.identify_device = NULL; diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 9c5342e7a69c..3220b3fc6b20 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -42,6 +42,7 @@ #include <linux/blkdev.h> #include <linux/freezer.h> #include <linux/scatterlist.h> +#include <linux/libata.h> /* ---------- SCSI Host glue ---------- */ @@ -192,6 +193,11 @@ static int sas_queue_up(struct sas_task *task) return 0; } +static inline int dev_is_sata(struct domain_device *dev) +{ + return (dev->rphy->identify.target_port_protocols & SAS_PROTOCOL_SATA); +} + /** * sas_queuecommand -- Enqueue a command for processing * @parameters: See SCSI Core documentation @@ -213,6 +219,12 @@ int sas_queuecommand(struct scsi_cmnd *cmd, struct sas_ha_struct *sas_ha = dev->port->ha; struct sas_task *task; + if (dev_is_sata(dev)) { + res = ata_sas_queuecmd(cmd, scsi_done, + dev->sata_dev.ap); + goto out; + } + res = -ENOMEM; task = sas_create_task(cmd, dev, GFP_ATOMIC); if (!task) @@ -684,6 +696,279 @@ enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) return EH_NOT_HANDLED; } + +static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) +{ + /* Cheesy attempt to translate SAS errors into ATA. Hah! */ + + /* transport error */ + if (ts->resp == SAS_TASK_UNDELIVERED) + return AC_ERR_ATA_BUS; + + /* ts->resp == SAS_TASK_COMPLETE */ + /* task delivered, what happened afterwards? */ + switch (ts->stat) { + case SAS_DEV_NO_RESPONSE: + return AC_ERR_TIMEOUT; + + case SAS_INTERRUPTED: + case SAS_PHY_DOWN: + case SAS_NAK_R_ERR: + return AC_ERR_ATA_BUS; + + + case SAS_DATA_UNDERRUN: + /* + * Some programs that use the taskfile interface + * (smartctl in particular) can cause underrun + * problems. Ignore these errors, perhaps at our + * peril. + */ + return 0; + + case SAS_DATA_OVERRUN: + case SAS_QUEUE_FULL: + case SAS_DEVICE_UNKNOWN: + case SAS_SG_ERR: + return AC_ERR_INVALID; + + case SAM_CHECK_COND: + case SAS_OPEN_TO: + case SAS_OPEN_REJECT: + case SAS_PROTO_RESPONSE: + SAS_DPRINTK("%s: Saw error %d. What to do?\n", + __FUNCTION__, ts->stat); + return AC_ERR_OTHER; + + case SAS_ABORTED_TASK: + return AC_ERR_DEV; + + default: + return 0; + } +} + +static void sas_ata_task_done(struct sas_task *task) +{ + struct ata_queued_cmd *qc = task->uldd_task; + struct domain_device *dev = qc->ap->private_data; + struct task_status_struct *stat = &task->task_status; + struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; + enum ata_completion_errors ac; + + ac = sas_to_ata_err(stat); + if (ac) { + SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__, stat->stat); + /* We saw a SAS error. Send a vague error. */ + qc->err_mask = ac; + dev->sata_dev.tf.feature = 0x04; /* status err */ + dev->sata_dev.tf.command = ATA_ERR; + goto end; + } + + ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf); + qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command); + dev->sata_dev.sstatus = resp->sstatus; + dev->sata_dev.serror = resp->serror; + dev->sata_dev.scontrol = resp->scontrol; + dev->sata_dev.ap->sactive = resp->sactive; +end: + ata_qc_complete(qc); + list_del_init(&task->list); + sas_free_task(task); +} + +int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) +{ + struct domain_device *dev = sdev_to_domain_dev(sdev); + + if (dev_is_sata(dev)) + return ata_scsi_ioctl(sdev, cmd, arg); + + return -EINVAL; +} + +static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) +{ + int res = -ENOMEM; + struct sas_task *task; + struct domain_device *dev = qc->ap->private_data; + struct sas_ha_struct *sas_ha = dev->port->ha; + struct Scsi_Host *host = sas_ha->core.shost; + struct sas_internal *i = to_sas_internal(host->transportt); + struct scatterlist *sg; + unsigned int num = 0; + unsigned int xfer = 0; + + task = sas_alloc_task(GFP_ATOMIC); + if (!task) + goto out; + task->dev = dev; + task->task_proto = SAS_PROTOCOL_STP; + task->task_done = sas_ata_task_done; + + ata_tf_to_fis(&qc->tf, (u8*)&task->ata_task.fis, 0); + task->uldd_task = qc; + if (is_atapi_taskfile(&qc->tf)) { + memcpy(task->ata_task.atapi_packet, qc->cdb, ATAPI_CDB_LEN); + task->total_xfer_len = qc->nbytes + qc->pad_len; + task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem; + } else { + ata_for_each_sg(sg, qc) { + num++; + xfer += sg->length; + } + + task->total_xfer_len = xfer; + task->num_scatter = num; + } + + task->data_dir = qc->dma_dir; + task->scatter = qc->__sg; + task->ata_task.retry_count = 1; + task->task_state_flags = SAS_TASK_STATE_PENDING; + + if (qc->tf.protocol == ATA_PROT_DMA) + task->ata_task.dma_xfer = 1; + + if (sas_ha->lldd_max_execute_num < 2) + res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC); + else + res = sas_queue_up(task); + + /* Examine */ + if (res) { + SAS_DPRINTK("lldd_execute_task returned: %d\n", res); + + sas_free_task(task); + if (res == -SAS_QUEUE_FULL) + return -ENOMEM; + } + +out: + return res; +} + +static u8 sas_ata_check_status(struct ata_port *ap) +{ + struct domain_device *dev = ap->private_data; + return dev->sata_dev.tf.command; +} + +static void sas_ata_phy_reset(struct ata_port *ap) +{ + struct domain_device *dev = ap->private_data; + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + int res = 0; + + if (i->dft->lldd_I_T_nexus_reset) + res = i->dft->lldd_I_T_nexus_reset(dev); + + if (res) + SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__); + + switch (dev->sata_dev.command_set) { + case ATA_COMMAND_SET: + SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__); + ap->device[0].class = ATA_DEV_ATA; + break; + case ATAPI_COMMAND_SET: + SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__); + ap->device[0].class = ATA_DEV_ATAPI; + break; + default: + SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", + __FUNCTION__, + dev->sata_dev.command_set); + ap->device[0].class = ATA_DEV_ATA; + break; + } + + ap->cbl = ATA_CBL_SATA; +} + +static void sas_ata_post_internal(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask) + SAS_DPRINTK("%s: Failure; reset phy!\n", __FUNCTION__); +} + +static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct domain_device *dev = ap->private_data; + memcpy(tf, &dev->sata_dev.tf, sizeof (*tf)); +} + +static void sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in, + u32 val) +{ + struct domain_device *dev = ap->private_data; + + SAS_DPRINTK("STUB %s\n", __FUNCTION__); + switch (sc_reg_in) { + case SCR_STATUS: + dev->sata_dev.sstatus = val; + break; + case SCR_CONTROL: + dev->sata_dev.scontrol = val; + break; + case SCR_ERROR: + dev->sata_dev.serror = val; + break; + case SCR_ACTIVE: + dev->sata_dev.ap->sactive = val; + break; + } +} + +static u32 sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in) +{ + struct domain_device *dev = ap->private_data; + + SAS_DPRINTK("STUB %s\n", __FUNCTION__); + switch (sc_reg_in) { + case SCR_STATUS: + return dev->sata_dev.sstatus; + case SCR_CONTROL: + return dev->sata_dev.scontrol; + case SCR_ERROR: + return dev->sata_dev.serror; + case SCR_ACTIVE: + return dev->sata_dev.ap->sactive; + default: + return 0xffffffffU; + } +} + +static struct ata_port_operations sas_sata_ops = { + .port_disable = ata_port_disable, + .check_status = sas_ata_check_status, + .check_altstatus = sas_ata_check_status, + .dev_select = ata_noop_dev_select, + .phy_reset = sas_ata_phy_reset, + .post_internal_cmd = sas_ata_post_internal, + .tf_read = sas_ata_tf_read, + .qc_prep = ata_noop_qc_prep, + .qc_issue = sas_ata_qc_issue, + .port_start = ata_sas_port_start, + .port_stop = ata_sas_port_stop, + .scr_read = sas_ata_scr_read, + .scr_write = sas_ata_scr_write +}; + +static struct ata_port_info sata_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* PIO0-4 */ + .mwdma_mask = 0x07, /* MWDMA0-2 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sas_sata_ops +}; + struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy) { struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent); @@ -722,11 +1007,33 @@ static inline struct domain_device *sas_find_target(struct scsi_target *starget) int sas_target_alloc(struct scsi_target *starget) { + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); struct domain_device *found_dev = sas_find_target(starget); if (!found_dev) return -ENODEV; + if (dev_is_sata(found_dev)) { + struct ata_port *ap; + + ata_host_init(&found_dev->sata_dev.ata_host, + &ha->pcidev->dev, + sata_port_info.flags, + &sas_sata_ops); + ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host, + &sata_port_info, + shost); + if (!ap) { + SAS_DPRINTK("ata_sas_port_alloc failed.\n"); + return -ENODEV; + } + + ap->private_data = found_dev; + ap->cbl = ATA_CBL_SATA; + found_dev->sata_dev.ap = ap; + } + starget->hostdata = found_dev; return 0; } @@ -741,6 +1048,11 @@ int sas_slave_configure(struct scsi_device *scsi_dev) BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE); + if (dev_is_sata(dev)) { + ata_sas_slave_configure(scsi_dev, dev->sata_dev.ap); + return 0; + } + sas_ha = dev->port->ha; sas_read_port_mode_page(scsi_dev); @@ -764,6 +1076,10 @@ int sas_slave_configure(struct scsi_device *scsi_dev) void sas_slave_destroy(struct scsi_device *scsi_dev) { + struct domain_device *dev = sdev_to_domain_dev(scsi_dev); + + if (dev_is_sata(dev)) + ata_port_disable(dev->sata_dev.ap); } int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth) @@ -984,6 +1300,29 @@ void sas_task_abort(struct sas_task *task) scsi_schedule_eh(sc->device->host); } +int sas_slave_alloc(struct scsi_device *scsi_dev) +{ + struct domain_device *dev = sdev_to_domain_dev(scsi_dev); + + if (dev_is_sata(dev)) + return ata_sas_port_init(dev->sata_dev.ap); + + return 0; +} + +void sas_target_destroy(struct scsi_target *starget) +{ + struct domain_device *found_dev = sas_find_target(starget); + + if (!found_dev) + return; + + if (dev_is_sata(found_dev)) + ata_sas_port_destroy(found_dev->sata_dev.ap); + + return; +} + EXPORT_SYMBOL_GPL(sas_queuecommand); EXPORT_SYMBOL_GPL(sas_target_alloc); EXPORT_SYMBOL_GPL(sas_slave_configure); @@ -997,3 +1336,6 @@ EXPORT_SYMBOL_GPL(sas_phy_reset); EXPORT_SYMBOL_GPL(sas_phy_enable); EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler); EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler); +EXPORT_SYMBOL_GPL(sas_slave_alloc); +EXPORT_SYMBOL_GPL(sas_target_destroy); +EXPORT_SYMBOL_GPL(sas_ioctl); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 2e6bdc4e7a0a..ce20177069a4 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -30,6 +30,7 @@ #include <linux/timer.h> #include <linux/pci.h> #include <scsi/sas.h> +#include <linux/libata.h> #include <linux/list.h> #include <asm/semaphore.h> #include <scsi/scsi_device.h> @@ -165,6 +166,13 @@ struct sata_device { u8 port_no; /* port number, if this is a PM (Port) */ struct list_head children; /* PM Ports if this is a PM */ + + struct ata_port *ap; + struct ata_host ata_host; + struct ata_taskfile tf; + u32 sstatus; + u32 serror; + u32 scontrol; }; /* ---------- Domain device ---------- */ @@ -661,4 +669,8 @@ int __sas_task_abort(struct sas_task *); int sas_eh_device_reset_handler(struct scsi_cmnd *cmd); int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd); +extern void sas_target_destroy(struct scsi_target *); +extern int sas_slave_alloc(struct scsi_device *); +extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg); + #endif /* _SASLIB_H_ */ |