diff options
| -rw-r--r-- | drivers/ide/ide-probe.c | 12 | ||||
| -rw-r--r-- | drivers/ide/pci/it821x.c | 34 |
2 files changed, 24 insertions, 22 deletions
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 3cebed77f55d..41bfa4d21ab6 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -717,7 +717,7 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave); * This routine only knows how to look for drive units 0 and 1 * on an interface, so any setting of MAX_DRIVES > 2 won't work here. */ -static void probe_hwif(ide_hwif_t *hwif) +static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif)) { unsigned int unit; unsigned long flags; @@ -820,6 +820,9 @@ static void probe_hwif(ide_hwif_t *hwif) return; } + if (fixup) + fixup(hwif); + for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; @@ -874,10 +877,7 @@ static int hwif_init(ide_hwif_t *hwif); int probe_hwif_init_with_fixup(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif)) { - probe_hwif(hwif); - - if (fixup) - fixup(hwif); + probe_hwif(hwif, fixup); if (!hwif_init(hwif)) { printk(KERN_INFO "%s: failed to initialize IDE interface\n", @@ -1404,7 +1404,7 @@ int ideprobe_init (void) for (index = 0; index < MAX_HWIFS; ++index) if (probe[index]) - probe_hwif(&ide_hwifs[index]); + probe_hwif(&ide_hwifs[index], NULL); for (index = 0; index < MAX_HWIFS; ++index) if (probe[index]) hwif_init(&ide_hwifs[index]); diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 5faaff87d580..4bd4bf02e917 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -1,6 +1,6 @@ /* - * linux/drivers/ide/pci/it821x.c Version 0.10 Mar 10 2007 + * linux/drivers/ide/pci/it821x.c Version 0.15 Jun 2 2007 * * Copyright (C) 2004 Red Hat <alan@redhat.com> * Copyright (C) 2007 Bartlomiej Zolnierkiewicz @@ -262,7 +262,7 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio) } if (itdev->smart) - goto set_drive_speed; + return 0; /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ itdev->want[unit][1] = pio_want[set_pio]; @@ -271,7 +271,6 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio) it821x_clock_strategy(drive); it821x_program(drive, itdev->pio[unit]); -set_drive_speed: return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio); } @@ -455,12 +454,12 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) default: return 1; } + + return ide_config_drive_speed(drive, speed); } - /* - * In smart mode the clocking is done by the host controller - * snooping the mode we picked. The rest of it is not our problem - */ - return ide_config_drive_speed(drive, speed); + + /* don't touch anything in the smart mode */ + return 0; } /** @@ -559,17 +558,10 @@ static void __devinit it821x_fixups(ide_hwif_t *hwif) if(idbits[129] != 1) printk("(%dK stripe)", idbits[146]); printk(".\n"); - /* Now the core code will have wrongly decided no DMA - so we need to fix this */ - hwif->dma_off_quietly(drive); -#ifdef CONFIG_IDEDMA_ONLYDISK - if (drive->media == ide_disk) -#endif - ide_set_dma(drive); } else { /* Non RAID volume. Fixups to stop the core code doing unsupported things */ - id->field_valid &= 1; + id->field_valid &= 3; id->queue_depth = 0; id->command_set_1 = 0; id->command_set_2 &= 0xC400; @@ -584,6 +576,16 @@ static void __devinit it821x_fixups(ide_hwif_t *hwif) printk(KERN_INFO "%s: Performing identify fixups.\n", drive->name); } + + /* + * Set MWDMA0 mode as enabled/support - just to tell + * IDE core that DMA is supported (it821x hardware + * takes care of DMA mode programming). + */ + if (id->capability & 1) { + id->dma_mword |= 0x0101; + drive->current_speed = XFER_MW_DMA_0; + } } } |