diff options
| author | Ben Hutchings <bhutchings@solarflare.com> | 2009-06-10 05:28:04 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-06-11 02:47:10 -0700 |
| commit | d005ba6cc82440d9ebf96f3ec8f79c54578b898f (patch) | |
| tree | 871a9a75e1fcb6dbf9c8f3aa6944fe6a7baf2068 | |
| parent | b8facca01ba381c3f8ff2391fbe3860ebc6a6bdc (diff) | |
mdio: Expose 10GBASE-T MDI-X status via ethtool
This is available in a standard MDIO register in 10GBASE-T PHYs.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/mdio.c | 17 | ||||
| -rw-r--r-- | include/linux/mdio.h | 9 |
2 files changed, 26 insertions, 0 deletions
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c index 66483035f683..dc45e9856c35 100644 --- a/drivers/net/mdio.c +++ b/drivers/net/mdio.c @@ -296,6 +296,23 @@ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX || ecmd->speed == SPEED_10000); } + + /* 10GBASE-T MDI/MDI-X */ + if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) { + switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBT_SWAPPOL)) { + case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: + ecmd->eth_tp_mdix = ETH_TP_MDI; + break; + case 0: + ecmd->eth_tp_mdix = ETH_TP_MDI_X; + break; + default: + /* It's complicated... */ + ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + break; + } + } } EXPORT_SYMBOL(mdio45_ethtool_gset_npage); diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 56851646529a..cfdf1df2875e 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -45,6 +45,7 @@ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ /* Media-dependent registers. */ +#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. * Lanes B-D are numbered 134-136. */ @@ -195,6 +196,14 @@ #define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 #define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 +/* PMA 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ + /* PMA 10GBASE-T TX power register. */ #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ |