path: root/xts5/tetclean.cfg

#
# Copyright (c) 2005 X.Org Foundation L.L.C.
# 
# Permission is hereby granted, free of charge, to any person obtaining a copy of
# this software and associated documentation files (the "Software"), to deal in
# the Software without restriction, including without limitation the rights to
# use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
# of the Software, and to permit persons to whom the Software is furnished to do
# so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in all
# copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Copyright (c) 2001,2004 The Open Group
# Copyright (c) Applied Testing and Technology, Inc. 1995
# All Rights Reserved.
#
# Project:     VSW5
#
# File:        tetbuild.cfg/tetclean.cfg
#
# Description:
#       Build/clean configuration file for VSW5
#

# Portions of this software are based on Xlib and X Protocol Test Suite.
# We have used this material under the terms of its copyright, which grants
# free use, subject to the conditions below.  Note however that those
# portions of this software that are based on the original Test Suite have
# been significantly revised and that all such revisions are copyright (c)
# 1995 Applied Testing and Technology, Inc.  Insomuch as the proprietary
# revisions cannot be separated from the freely copyable material, the net
# result is that use of this software is governed by the ApTest copyright.
#
# Copyright (c) 1990, 1991  X Consortium
# 
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# 
# Except as contained in this notice, the name of the X Consortium shall not be
# used in advertising or otherwise to promote the sale, use or other dealings
# in this Software without prior written authorization from the X Consortium.
#
# Copyright 1990, 1991 UniSoft Group Limited.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee,
# provided that the above copyright notice appear in all copies and that
# both that copyright notice and this permission notice appear in
# supporting documentation, and that the names of MIT and UniSoft not be
# used in advertising or publicity pertaining to distribution of the
# software without specific, written prior permission.  MIT and UniSoft
# make no representations about the suitability of this software for any
# purpose.  It is provided "as is" without express or implied warranty.

#########################
# Note
#########################

#  For certain variables, there are lines of the form:
#  # System: CONFIGVAR=foo
#  
#  These are suggested values for these options, and may not
#  always be correct and up-to-date for any given system.

#########################
# TET Parameters
#########################

# TET_BUILD_TOOL - The program to use as the build tool.
# This should normally be the wbuild program supplied as part
# of the test suite.
TET_BUILD_TOOL=wbuild

# TET_BUILD_FILE - This is intended to be used for the arguments to the TET
# build tool - this should be empty, since no arguments are accepted by pmake.
TET_BUILD_FILE=

# TET_CLEAN_TOOL - The program to use as the TET clean tool.
# This should normally be the wclean program supplied as part 
# of the test suite.
TET_CLEAN_TOOL=wbuild

# TET_CLEAN_FILE - This is intended to be used for the arguments to the TET
# clean tool - this *must* be 'clean'
TET_CLEAN_FILE=clean

# TET_OUTPUT_CAPTURE - This must be set to True.
TET_OUTPUT_CAPTURE=TRUE

##########################
# X RELEASE
##########################

# XT_X_RELEASE - The X11 Release, e.g. 4 for X11R4, 5 for X11R5, 6 for X11R6.
# Note that when XT_X_RELEASE=6 the only supported value for XP_OPEN_DIS is
# XlibXtst.c
#XT_X_RELEASE=4
#XT_X_RELEASE=5
#XT_X_RELEASE=6
XT_X_RELEASE=

##########################
# Commands
##########################

# SHELL - The following line should cause the Bourne shell to be used 
# by make.
SHELL=/bin/sh

# CC - C compiler
# AIXV3	: CC=xlc
CC=cc

# RM - Command to remove files
RM=rm -f

# AR - command to generate an archive
AR=ar cr

# LD - command to link object files.
LD=ld

# LN - command to make hard links to files.  This could be a copy command
# if no link command exists.
LN=ln

# RANLIB - If the system requires ranlib then this is set to
# ranlib else set to true
# SunOS	: RANLIB=ranlib
# ULTRIX: RANLIB=ranlib
# HP-UX	: RANLIB=true
# DYNIX	: RANLIB=ranlib
# A/UX	: RANLIB=true
# AIXV3	: RANLIB=ranlib
# SVR4	: RANLIB=true
RANLIB=true

# TSORT - Set to cat if archiver inserts its own symbol table
# or the system uses ranlib, else set to tsort
TSORT=cat

# LORDER - Set to echo if archiver inserts its own symbol table
# or the system uses ranlib, else set to lorder
LORDER=echo

# CP - copy file
CP=cp

# CODEMAKER - this is the utility supplied with the test suite
# to extract the code from the combined source files.
CODEMAKER=mc

##################
# TET locations
##################

# The location of TET_ROOT.  This must not contain variable expansions.
TET_ROOT=

# TETBASE - The location of the TET directories
TETBASE=${TET_ROOT}

# TETINCDIR - The directory containing the TET API headers.
TETINCDIR=${TETBASE}/inc/tet3

# TETLIB - The library containing the TET API library
TETLIB=${TETBASE}/lib/tet3

# TCM - The Test Control Manager
TCM=${TETLIB}/tcm.o

# TCMCHILD - The Test Control Manager for files executed by tet_exec. 
TCMCHILD=${TETLIB}/tcmchild.o

# APILIB - The TET API library
APILIB=${TETLIB}/libapi.a

####################
# Xtest variables
####################

# XTESTHOST - name of host on which test suite clients are to be executed.
# This may be set to the value returned by a command which can be executed
# using the PATH you have set on your host, or may be set to a specific name.
# This is used to produce a resource file named .Xdefaults-$(XTESTHOST) in the
# test execution directory.
# The resource file is created when building the test for XGetDefault.
# This parameter is only used in the Makefile of the test for XGetDefault.
# Examples are:
# XTESTHOST=`hostname`
# XTESTHOST=`uname -n`
# XTESTHOST=triton
#
# SVR4	: XTESTHOST=`uname -n`
XTESTHOST=`hostname`

# XTESTFONTDIR - location of installed VSW5 compiled fonts
XTESTFONTDIR=/usr/lib/X11/fonts/xtest

# XTESTROOT
XTESTROOT=${TET_ROOT}/xts5

# XTTESTLIB - the Xt Tests' libraries
XTTESTLIB=${XTESTLIBDIR}/libXtTest.a

# XTESTLIBDIR - location of the VSW5 library files
XTESTLIBDIR=${XTESTROOT}/lib

# XTESTLIB - the VSW5 library
XTESTLIB=${XTESTLIBDIR}/libxtest.a

# XSTLIB - library for linking the X Protocol tests
XSTLIB=${XTESTLIBDIR}/libXst.a

# XTESTFONTLIB - supplementary library with font metrics.
XTESTFONTLIB=${XTESTLIBDIR}/libfont.a

# XTESTXIMLIB - supplementary library for input methods.
XTESTXIMLIB=${XTESTLIBDIR}/libximtest.a

# XTESTINCDIR - the VSW5 header file directory
XTESTINCDIR=${XTESTROOT}/include

# XTESTBIN - location for VSW5 binaries.
XTESTBIN=${XTESTROOT}/bin

####################
# System files
####################

# SYSLIBS - Any system libraries that are needed, will almost certainly
# include Xlib.
# If you wish to build the tests to make use of the XTEST extension, you
# will need to include the X extension library and the XTEST library.
# If you wish to build the tests to test the Input Device extension, you
# will need to include the necessary libraries for it.
# These are usually included by adding -lXi -lXext before -lX11.
# SVR4	: SYSLIBS=-lXi -lXtst -lXext -lX11 -lsocket -lnsl
# OSF1  : SYSLIBS=-lXi -lXtst -lXext -lX11
SYSLIBS=

# XP_SYSLIBS - Any system libraries that are needed, to link the
# X Protocol tests. This will include Xlib, since libXst.a
# (which is part of the test suite) will include at least a call
# on XOpenDisplay.
# If you wish to build the tests to test the Input Device extension, you
# will need to include the necessary libraries for it.
# These are usually included by adding -lXi -lXext before -lX11.
# SVR4	: XP_SYSLIBS=-L/usr/lib/X11 -lXi -lXtst -lXext -lX11 -lnsl
# OSF1	: XP_SYSLIBS=-lXi -lXtst -lXext -lX11
XP_SYSLIBS=

# XT_SYSLIBS - Any system libraries that are needed, to link the
# Xt Toolkit tests. This will include Xlib and Xt.
# Do not include Athena widgets in this list (see XT_ATHENA below)
# If you wish to build the tests to make use of the XTEST extension, you
# will need to include the X extension library and the XTEST library.
# SVR4	: XT_SYSLIBS=-L/usr/lib/X11 -lXt -lXtst -lXext -lX11 -lnsl
# OSF1  : XT_SYSLIBS= -lXt -lXtst -lXext -lX11
XT_SYSLIBS=

# XT_ATHENA - System libraries that are needed provide the Athena
# widgets.
# If your implementation provides Athena widgets:
# XT_ATHENA=-lXaw -lXmu
# If your implementation does not provide Athena widgets, use the
# VSW5 provided versions:
# XT_ATHENA=${XTESTLIBDIR}/libXtaw.a ${XTESTLIBDIR}/libXtmu.a
XT_ATHENA=

# SYSINC - Any commands that should be given to the C compiler
# to cause include file directories to be searched.  Probably
# needs to include /usr/include/X11.  Note: when the implementation
# provides Athena widgets /usr/include must be included here to ensure
# the implementation's Athena headers are used rather than those
# provided by the test suite.
SYSINC=-I/usr/include -I/usr/include/X11

DEPHEADERS=/usr/include/X11/Xlib.h

################################
##### C compiler Directives Section
################################

# COPTS - Option to C compiler
# SunOS	: COPTS=-O
# ULTRIX: COPTS=-O
# HP-UX	: COPTS=-O -Aa
# DYNIX	: COPTS=-O
# OSF1	: COPTS=-O
# A/UX  : COPTS=-A4 -O
# SVR4	: COPTS=-O -Xc
COPTS=

# DEFINES - C compiler defines.
# If you wish to build the tests to make use of the XTEST extension, you
# will need to define XTESTEXTENSION.
# If you wish to test the Input Device Extension, you will need to define
# INPUTEXTENSION.
# SunOS	: DEFINES=
# ULTRIX: DEFINES=
# HP-UX	: DEFINES=-D_XOPEN_SOURCE -D_HPUX_SOURCE
# DYNIX	: DEFINES=
# A/UX  : DEFINES=
# AIXV3	: DEFINES=-D_XOPEN_SOURCE -D_ALL_SOURCE
# SVR4	: DEFINES=-D_XOPEN_SOURCE
# OSF1	: DEFINES=-D_XOPEN_SOURCE_EXTENDED -DXTESTEXTENSION
DEFINES=

# XP_DEFINES - C compiler defines specific to the X Protocol tests.
# This can be set as DEFINES, but you can build support for additional 
# connection methods beyond TCP/IP, using the following defines, 
# if XP_OPEN_DIS is XlibNoXtst.c (R4/R5 XOpenDisplay emulation):
#	-DDNETCONN - Connections can also use DECnet.
#	-DUNIXCONN - Connections can also use UNIX domain sockets.
# Refer to your documentation for building and installing Xlib on
# your platform.
# If XP_OPEN_DIS is one of XlibXtst.c or XlibOpaque.c then none of
# the defines listed above will be required.
# If you wish to test the Input Device Extension, you will need to define
# INPUTEXTENSION.
#
# SunOS	: XP_DEFINES=-DUNIXCONN
# ULTRIX: XP_DEFINES=-DUNIXCONN
# HP-UX	: XP_DEFINES=-D_XOPEN_SOURCE -D_HPUX_SOURCE -DUNIXCONN
# DYNIX	: XP_DEFINES=-D_POSIX_SOURCE -DUNIXCONN
# A/UX 	: XP_DEFINES=-D_POSIX_SOURCE -DUNIXCONN
# AIXV3	: XP_DEFINES=-D_XOPEN_SOURCE -D_ALL_SOURCE
# SVR4	: XP_DEFINES=-D_XOPEN_SOURCE
# OSF1	: XP_DEFINES=-D_XOPEN_SOURCE_EXTENDED -DUNIXCONN
XP_DEFINES=

# XT_DEFINES - C compiler defines specific to the Xt Toolkit tests.
# If you wish to build the tests to make use of the XTEST extension, you
# will need to define XTESTEXTENSION.
# -DNeedFunctionPrototypes=1 is needed on many implementations to avoid
# compiler warnings about the definition of XtPointer.
# SunOS	: XP_DEFINES=-DNeedFunctionPrototypes=1
# ULTRIX: XP_DEFINES=-DNeedFunctionPrototypes=1
# HP-UX	: XP_DEFINES=-D_XOPEN_SOURCE -D_HPUX_SOURCE -DNeedFunctionPrototypes=1
# DYNIX	: XP_DEFINES=-D_POSIX_SOURCE -DNeedFunctionPrototypes=1
# A/UX 	: XP_DEFINES=-D_POSIX_SOURCE -DNeedFunctionPrototypes=1
# AIXV3	: XP_DEFINES=-D_XOPEN_SOURCE -D_ALL_SOURCE -DNeedFunctionPrototypes=1
# SVR4	: XP_DEFINES=-DNeedFunctionPrototypes=1 -D_XOPEN_SOURCE
# OSF1	: XT_DEFINES=-D_XOPEN_SOURCE_EXTENDED -DNeedFunctionPrototypes=1 -DXTESTEXTENSION
XT_DEFINES=

# LINKOBJOPTS - options to give to the LD program to link object
# files together into one object file that can be further linked.
LINKOBJOPTS=-r

# LDFLAGS - Flags for the loader.
# SunOS	: LDFLAGS=
# ULTRIX: LDFLAGS=
# HP-UX	: LDFLAGS=
# DYNIX	: LDFLAGS=
# A/UX 	: LDFLAGS=-ZP
# AIXV3	: LDFLAGS=
# SVR4	: LDFLAGS=-Xc -L/usr/lib/X11
LDFLAGS=

# XP_OPEN_DIS - A choice of which code to build in the X Protocol library 
# to make an X server connection.
# This must be set to one of three possible values:
#
#	XlibXtst.c	Your Xlib includes enhancements to _XConnectDisplay 
#			ensuring maximum portable protocol test coverage.
#			This option must be used if XT_X_RELEASE=6 as it is
#			the only one that supports setting up BigRequests.
#	XlibOpaque.c	You have a normal R4 Xlib or early R5 Xlib which you 
#			cannot patch to include the enhancements to 
#			_XConnectDisplay, and you cannot emulate these by 
#			building XlibNoXtst.c, so only client-native testing 
#			can be done portably, and no failure testing of 
#			XOpenDisplay can be done.  The affected tests will
#			complain about this, so use of XlibOpaque.c is not
#			suitable for branding runs.  (For other uses, you can
#			suppress the complaints about non-native byte order
#			by setting XT_DEBUG_BYTE_SEX=NATIVE in tetexec.cfg.)
#			This option uses XOpenDisplay to make the connection, 
#			from which the file descriptor is recovered for 
#			our own use. XCloseDisplay shuts down the connection.
#	XlibNoXtst.c	You have a normal R4 Xlib or early R5 Xlib but you
#			can use the R4/R5 connection emulation supplied.
#			(Note: R4/R5 independent.)
#			This will ensure maximum protocol test coverage
#			but may not be portable to all platforms.
#
# Reasons for not being able to build XlibNoXtst.c might include:
# i)  different interfaces to connection setup and connection read/write;
# ii) different access control mechanisms.
# Refer to your Xlib documentation for further details.
#
#XP_OPEN_DIS=XlibXtst.c
#XP_OPEN_DIS=XlibNoXtst.c
#XP_OPEN_DIS=XlibOpaque.c
XP_OPEN_DIS=XlibXtst.c

# INCLUDES - Options to cause C compiler to search correct directories
# for headers.
INCLUDES=-I. -I${TETINCDIR} ${SYSINC} -I${XTESTINCDIR}

# CFLAGS - Flags for C compiler
# 
# for generating .dat files
# CFLAGS=-DXT_X_RELEASE=$(XT_X_RELEASE) -DGENERATE_PIXMAPS \
#    $(CFLOCAL) $(COPTS) $(INCLUDES) $(DEFINES)
#
CFLAGS=-DXT_X_RELEASE=$(XT_X_RELEASE) $(CFLOCAL) $(COPTS) $(INCLUDES) $(DEFINES)

# XP_CFLAGS - Flags for C compiler specific to the X Protocol tests.
XP_CFLAGS=-DXT_X_RELEASE=$(XT_X_RELEASE) $(CFLOCAL) $(COPTS) $(INCLUDES) $(XP_DEFINES)

# XT_CFLAGS - Flags for C compiler specific to the Xt Toolkit tests.
XT_CFLAGS=-DXT_X_RELEASE=$(XT_X_RELEASE) $(CFLOCAL) $(COPTS) $(INCLUDES) $(XT_DEFINES)

# LIBS - List of libraries.
#
# for generating .dat files
# LIBS=${XTESTXIMLIB} ${XTESTLIB} ${XTESTFONTLIB} ${PIXLIB} 
#    {APILIB} ${SYSMATHLIB}
#
LIBS=${XTESTXIMLIB} ${XTESTLIB} ${XTESTFONTLIB} ${APILIB}

# XP_LIBS - List of libraries specific to the X Protocol tests.
XP_LIBS=${XSTLIB} ${XTESTLIB} ${XTESTFONTLIB} ${APILIB}

# XT_LIBS - List of libraries specific to the Xt Toolkit tests.
XT_LIBS= ${XTESTLIB} ${XTTESTLIB} ${APILIB}

################################
##### Pixel Validation Section.
################################

PVXTESTLIB=${XTESTLIBDIR}/libxtstpv.a
PIXLIB=${XTESTLIBDIR}/libpvt.a
PVLIBS=${PVXTESTLIB} ${XTESTFONTLIB} ${PIXLIB} ${APILIB}

# SYSMATHLIB - system math library.  Directive to be given to the C compiler
# to cause the maths routines to be available.
SYSMATHLIB=-lm

################################
##### Lint Section.
################################

LINT=lint
LINTFLAGS=$(INCLUDES) $(DEFINES) -u -n
LINTXTEST=$(XTESTLIBDIR)/llib-lxtest.ln
LINTXST=$(XTESTLIBDIR)/llib-lXst.ln
LINTFONTS=$(XTESTLIBDIR)/llib-lfonts.ln
LINTTCM=$(XTESTLIBDIR)/llib-ltcm.ln
LINTTCMC=$(XTESTLIBDIR)/llib-ltcmc.ln
LINTLIBS=$(LINTXTEST) $(LINTFONTS)

XP_LINTFLAGS=$(INCLUDES) $(XP_DEFINES) -u -n
XP_LINTLIBS=$(LINTXST) $(LINTXTEST) $(LINTFONTS)