diff options
| -rw-r--r-- | src/mesa/drivers/dri/common/xmlpool/Makefile | 2 | ||||
| -rw-r--r-- | src/mesa/drivers/dri/common/xmlpool/options.h | 69 |
2 files changed, 66 insertions, 5 deletions
diff --git a/src/mesa/drivers/dri/common/xmlpool/Makefile b/src/mesa/drivers/dri/common/xmlpool/Makefile index ef94541c37..b077809cd1 100644 --- a/src/mesa/drivers/dri/common/xmlpool/Makefile +++ b/src/mesa/drivers/dri/common/xmlpool/Makefile @@ -41,7 +41,7 @@ # - info gettext # The set of supported languages. Add languages as needed. -POS=de.po es.po nl.po fr.po +POS=de.po es.po nl.po fr.po sv.po # # Don't change anything below, unless you know what you're doing. diff --git a/src/mesa/drivers/dri/common/xmlpool/options.h b/src/mesa/drivers/dri/common/xmlpool/options.h index 5cef72867b..d5f4fc3491 100644 --- a/src/mesa/drivers/dri/common/xmlpool/options.h +++ b/src/mesa/drivers/dri/common/xmlpool/options.h @@ -58,7 +58,8 @@ DRI_CONF_SECTION_BEGIN \ DRI_CONF_DESC(de,"Fehlersuche") \ DRI_CONF_DESC(es,"Depurando") \ DRI_CONF_DESC(nl,"Debuggen") \ - DRI_CONF_DESC(fr,"Debogage") + DRI_CONF_DESC(fr,"Debogage") \ + DRI_CONF_DESC(sv,"Felsökning") #define DRI_CONF_NO_RAST(def) \ DRI_CONF_OPT_BEGIN(no_rast,bool,def) \ @@ -67,6 +68,7 @@ DRI_CONF_OPT_BEGIN(no_rast,bool,def) \ DRI_CONF_DESC(es,"Desactivar aceleración 3D") \ DRI_CONF_DESC(nl,"3D versnelling uitschakelen") \ DRI_CONF_DESC(fr,"Désactiver l'accélération 3D") \ + DRI_CONF_DESC(sv,"Inaktivera 3D-accelerering") \ DRI_CONF_OPT_END #define DRI_CONF_PERFORMANCE_BOXES(def) \ @@ -76,6 +78,7 @@ DRI_CONF_OPT_BEGIN(performance_boxes,bool,def) \ DRI_CONF_DESC(es,"Mostrar cajas de rendimiento") \ DRI_CONF_DESC(nl,"Laat prestatie boxjes zien") \ DRI_CONF_DESC(fr,"Afficher les boîtes de performance") \ + DRI_CONF_DESC(sv,"Visa prestandarutor") \ DRI_CONF_OPT_END @@ -86,7 +89,8 @@ DRI_CONF_SECTION_BEGIN \ DRI_CONF_DESC(de,"Bildqualität") \ DRI_CONF_DESC(es,"Calidad de imagen") \ DRI_CONF_DESC(nl,"Beeldkwaliteit") \ - DRI_CONF_DESC(fr,"Qualité d'image") + DRI_CONF_DESC(fr,"Qualité d'image") \ + DRI_CONF_DESC(sv,"Bildkvalitet") #define DRI_CONF_EXCESS_MIPMAP(def) \ DRI_CONF_OPT_BEGIN(excess_mipmap,bool,def) \ @@ -129,6 +133,12 @@ DRI_CONF_OPT_BEGIN_V(texture_depth,enum,def,"0:3") \ DRI_CONF_ENUM(2,"Prérérer 16 bits par texel") \ DRI_CONF_ENUM(3,"Forcer 16 bits par texel") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Färgdjup för texturer") \ + DRI_CONF_ENUM(0,"Föredra färgdjupet för framebuffer") \ + DRI_CONF_ENUM(1,"Föredra 32 bitar per texel") \ + DRI_CONF_ENUM(2,"Föredra 16 bitar per texel") \ + DRI_CONF_ENUM(3,"Tvinga 16 bitar per texel") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_DEF_MAX_ANISOTROPY(def,range) \ @@ -138,6 +148,7 @@ DRI_CONF_OPT_BEGIN_V(def_max_anisotropy,float,def,range) \ DRI_CONF_DESC(es,"Valor máximo inicial para filtrado anisotrópico de textura") \ DRI_CONF_DESC(nl,"Initïele maximum waarde voor anisotrophische textuur filtering") \ DRI_CONF_DESC(fr,"Valeur maximale initiale pour le filtrage anisotropique de texture") \ + DRI_CONF_DESC(sv,"Initialt maximalt värde för anisotropisk texturfiltrering") \ DRI_CONF_OPT_END #define DRI_CONF_NO_NEG_LOD_BIAS(def) \ @@ -147,6 +158,7 @@ DRI_CONF_OPT_BEGIN(no_neg_lod_bias,bool,def) \ DRI_CONF_DESC(es,"Prohibir valores negativos de Nivel De Detalle (LOD) de texturas") \ DRI_CONF_DESC(nl,"Verbied negatief niveau detailonderscheid (LOD) van texturen") \ DRI_CONF_DESC(fr,"Interdire le LOD bias negatif") \ + DRI_CONF_DESC(sv,"Förbjud negativ LOD-kompensation för texturer") \ DRI_CONF_OPT_END #define DRI_CONF_FORCE_S3TC_ENABLE(def) \ @@ -156,6 +168,7 @@ DRI_CONF_OPT_BEGIN(force_s3tc_enable,bool,def) \ DRI_CONF_DESC(es,"Activar la compresión de texturas S3TC incluso si el soporte por software no está disponible") \ DRI_CONF_DESC(nl,"Schakel S3TC textuurcompressie in, zelfs als softwareondersteuning niet aanwezig is") \ DRI_CONF_DESC(fr,"Activer la compression de texture S3TC même si le support logiciel est absent") \ + DRI_CONF_DESC(sv,"Aktivera S3TC-texturkomprimering även om programvarustöd saknas") \ DRI_CONF_OPT_END #define DRI_CONF_COLOR_REDUCTION_ROUND 0 @@ -182,6 +195,10 @@ DRI_CONF_OPT_BEGIN_V(color_reduction,enum,def,"0:1") \ DRI_CONF_ENUM(0,"Arrondir les valeurs de couleur") \ DRI_CONF_ENUM(1,"Tramer les couleurs") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Initial färgminskningsmetod") \ + DRI_CONF_ENUM(0,"Avrunda färger") \ + DRI_CONF_ENUM(1,"Utjämna färger") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_ROUND_TRUNC 0 @@ -208,6 +225,10 @@ DRI_CONF_OPT_BEGIN_V(round_mode,enum,def,"0:1") \ DRI_CONF_ENUM(0,"Arrondi à l'inférieur") \ DRI_CONF_ENUM(1,"Arrondi au plus proche") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Färgavrundningsmetod") \ + DRI_CONF_ENUM(0,"Avrunda färdkomponenter nedåt") \ + DRI_CONF_ENUM(1,"Avrunda till närmsta färg") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_DITHER_XERRORDIFF 0 @@ -240,6 +261,11 @@ DRI_CONF_OPT_BEGIN_V(dither_mode,enum,def,"0:2") \ DRI_CONF_ENUM(1,"Diffusion d'erreur horizontale, réinitialisé pour chaque ligne") \ DRI_CONF_ENUM(2,"Tramage ordonné des couleurs") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Färgutjämningsmetod") \ + DRI_CONF_ENUM(0,"Horisontell felspridning") \ + DRI_CONF_ENUM(1,"Horisontell felspridning, återställ fel vid radbörjan") \ + DRI_CONF_ENUM(2,"Ordnad 2D-färgutjämning") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_FLOAT_DEPTH(def) \ @@ -249,6 +275,7 @@ DRI_CONF_OPT_BEGIN(float_depth,bool,def) \ DRI_CONF_DESC(es,"Búfer de profundidad en coma flotante") \ DRI_CONF_DESC(nl,"Dieptebuffer als commagetal") \ DRI_CONF_DESC(fr,"Z-buffer en virgule flottante") \ + DRI_CONF_DESC(sv,"Buffert för flytande punktdjup") \ DRI_CONF_OPT_END /** \brief Performance-related options */ @@ -258,7 +285,8 @@ DRI_CONF_SECTION_BEGIN \ DRI_CONF_DESC(de,"Leistung") \ DRI_CONF_DESC(es,"Rendimiento") \ DRI_CONF_DESC(nl,"Prestatie") \ - DRI_CONF_DESC(fr,"Performance") + DRI_CONF_DESC(fr,"Performance") \ + DRI_CONF_DESC(sv,"Prestanda") #define DRI_CONF_TCL_SW 0 #define DRI_CONF_TCL_PIPELINED 1 @@ -296,6 +324,12 @@ DRI_CONF_OPT_BEGIN_V(tcl_mode,enum,def,"0:3") \ DRI_CONF_ENUM(2,"Court-circuiter le pipeline TCL") \ DRI_CONF_ENUM(3,"Court-circuiter le pipeline TCL par une machine à états qui génère le codede TCL à la volée") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"TCL-läge (Transformation, Clipping, Lighting)") \ + DRI_CONF_ENUM(0,"Använd programvaru-TCL-rörledning") \ + DRI_CONF_ENUM(1,"Använd maskinvaru-TCL som första TCL-rörledningssteg") \ + DRI_CONF_ENUM(2,"Kringgå TCL-rörledningen") \ + DRI_CONF_ENUM(3,"Kringgå TCL-rörledningen med tillståndsbaserad maskinkod som direktgenereras") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_FTHROTTLE_BUSY 0 @@ -328,6 +362,11 @@ DRI_CONF_OPT_BEGIN_V(fthrottle_mode,enum,def,"0:2") \ DRI_CONF_ENUM(1,"Attente utilisant usleep()") \ DRI_CONF_ENUM(2,"Utiliser les interruptions") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Metod för att begränsa renderingslatens") \ + DRI_CONF_ENUM(0,"Upptagen med att vänta på grafikhårdvaran") \ + DRI_CONF_ENUM(1,"Sov i korta intervall under väntan på grafikhårdvaran") \ + DRI_CONF_ENUM(2,"Låt grafikhårdvaran sända ut ett programvaruavbrott och sov") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_VBLANK_NEVER 0 @@ -366,6 +405,12 @@ DRI_CONF_OPT_BEGIN_V(vblank_mode,enum,def,"0:3") \ DRI_CONF_ENUM(2,"Synchroniser avec le balayage vertical par défaut, mais obéir au choix de l'application") \ DRI_CONF_ENUM(3,"Toujours synchroniser avec le balayage vertical, l'application choisit l'intervalle minimal") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Synkronisering med vertikal uppdatering (växlingsintervall)") \ + DRI_CONF_ENUM(0,"Synkronisera aldrig med vertikal uppdatering, ignorera programmets val") \ + DRI_CONF_ENUM(1,"Initialt växlingsintervall 0, följ programmets val") \ + DRI_CONF_ENUM(2,"Initialt växlingsintervall 1, följ programmets val") \ + DRI_CONF_ENUM(3,"Synkronisera alltid med vertikal uppdatering, programmet väljer den minsta växlingsintervallen") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_HYPERZ_DISABLED 0 @@ -377,6 +422,7 @@ DRI_CONF_OPT_BEGIN(hyperz,bool,def) \ DRI_CONF_DESC(es,"Usar HyperZ para potenciar rendimiento") \ DRI_CONF_DESC(nl,"Gebruik HyperZ om de prestaties te verbeteren") \ DRI_CONF_DESC(fr,"Utiliser le HyperZ pour améliorer les performances") \ + DRI_CONF_DESC(sv,"Använd HyperZ för att maximera prestandan") \ DRI_CONF_OPT_END #define DRI_CONF_MAX_TEXTURE_UNITS(def,min,max) \ @@ -386,6 +432,7 @@ DRI_CONF_OPT_BEGIN_V(texture_units,int,def, # min ":" # max ) \ DRI_CONF_DESC(es,"Número de unidades de textura usadas") \ DRI_CONF_DESC(nl,"Aantal textuureenheden in gebruik") \ DRI_CONF_DESC(fr,"Nombre d'unités de texture") \ + DRI_CONF_DESC(sv,"Antal använda texturenheter") \ DRI_CONF_OPT_END #define DRI_CONF_ALLOW_LARGE_TEXTURES(def) \ @@ -415,6 +462,11 @@ DRI_CONF_OPT_BEGIN_V(allow_large_textures,enum,def,"0:2") \ DRI_CONF_ENUM(1,"At least 1 texture must fit under worst-case assumptions") \ DRI_CONF_ENUM(2,"Announce hardware limits") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Stöd för större texturer är inte garanterat att passa i grafikminnet") \ + DRI_CONF_ENUM(0,"Nej") \ + DRI_CONF_ENUM(1,"Åtminstone en textur måste passa för antaget sämsta förhållande") \ + DRI_CONF_ENUM(2,"Annonsera hårdvarubegränsningar") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END #define DRI_CONF_TEXTURE_BLEND_QUALITY(def,range) \ @@ -424,6 +476,7 @@ DRI_CONF_OPT_BEGIN_V(texture_blend_quality,float,def,range) \ DRI_CONF_DESC(es,"Calidad de filtrado de textura vs. velocidad, alias filtrado ”brilinear“ de textura") \ DRI_CONF_DESC(nl,"Textuurfilterkwaliteit versus -snelheid, ookwel bekend als “brilineaire” textuurfiltering") \ DRI_CONF_DESC(fr,"Qualité/performance du filtrage trilinéaire de texture (filtrage brilinéaire)") \ + DRI_CONF_DESC(sv,"Texturfiltreringskvalitet mot hastighet, även kallad ”brilinear”-texturfiltrering") \ DRI_CONF_OPT_END #define DRI_CONF_TEXTURE_HEAPS_ALL 0 @@ -456,6 +509,11 @@ DRI_CONF_OPT_BEGIN_V(texture_heaps,enum,def,"0:2") \ DRI_CONF_ENUM(1,"Utiliser uniquement la mémoire graphique (si disponible)") \ DRI_CONF_ENUM(2,"Utiliser uniquement la mémoire GART (AGP/PCIE) (si disponible)") \ DRI_CONF_DESC_END \ + DRI_CONF_DESC_BEGIN(sv,"Använda typer av texturminne") \ + DRI_CONF_ENUM(0,"Allt tillgängligt minne") \ + DRI_CONF_ENUM(1,"Endast kortminne (om tillgängligt)") \ + DRI_CONF_ENUM(2,"Endast GART-minne (AGP/PCIE) (om tillgängligt)") \ + DRI_CONF_DESC_END \ DRI_CONF_OPT_END /* Options for features that are not done in hardware by the driver (like GL_ARB_vertex_program @@ -466,7 +524,8 @@ DRI_CONF_SECTION_BEGIN \ DRI_CONF_DESC(de,"Funktionalität, die nicht hardwarebeschleunigt ist") \ DRI_CONF_DESC(es,"Características no aceleradas por hardware") \ DRI_CONF_DESC(nl,"Eigenschappen die niet hardwareversneld zijn") \ - DRI_CONF_DESC(fr,"Fonctionnalités ne bénéficiant pas d'une accélération matérielle") + DRI_CONF_DESC(fr,"Fonctionnalités ne bénéficiant pas d'une accélération matérielle") \ + DRI_CONF_DESC(sv,"Funktioner som inte är hårdvaruaccelererade") #define DRI_CONF_ARB_VERTEX_PROGRAM(def) \ DRI_CONF_OPT_BEGIN(arb_vertex_program,bool,def) \ @@ -475,6 +534,7 @@ DRI_CONF_OPT_BEGIN(arb_vertex_program,bool,def) \ DRI_CONF_DESC(es,"Activar la extensión GL_ARB_vertex_program") \ DRI_CONF_DESC(nl,"Zet uitbreiding GL_ARB_vertex_program aan") \ DRI_CONF_DESC(fr,"Activer l'extension GL_ARB_vertex_program") \ + DRI_CONF_DESC(sv,"Aktivera tillägget GL_ARB_vertex_program") \ DRI_CONF_OPT_END #define DRI_CONF_NV_VERTEX_PROGRAM(def) \ @@ -484,4 +544,5 @@ DRI_CONF_OPT_BEGIN(nv_vertex_program,bool,def) \ DRI_CONF_DESC(es,"Activar extensión GL_NV_vertex_program") \ DRI_CONF_DESC(nl,"Zet uitbreiding GL_NV_vertex_program aan") \ DRI_CONF_DESC(fr,"Activer l'extension GL_NV_vertex_program") \ + DRI_CONF_DESC(sv,"Aktivera tillägget GL_NV_vertex_program") \ DRI_CONF_OPT_END |