diff options
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/21285.c | 2 | ||||
-rw-r--r-- | drivers/serial/8250.c | 19 | ||||
-rw-r--r-- | drivers/serial/Kconfig | 2 | ||||
-rw-r--r-- | drivers/serial/amba-pl010.c | 4 | ||||
-rw-r--r-- | drivers/serial/clps711x.c | 4 | ||||
-rw-r--r-- | drivers/serial/imx.c | 4 | ||||
-rw-r--r-- | drivers/serial/sa1100.c | 6 | ||||
-rw-r--r-- | drivers/serial/serial_core.c | 16 | ||||
-rw-r--r-- | drivers/serial/serial_lh7a40x.c | 6 | ||||
-rw-r--r-- | drivers/serial/sh-sci.c | 96 | ||||
-rw-r--r-- | drivers/serial/sunsu.c | 14 |
11 files changed, 84 insertions, 89 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 221999bcf8fe..7aef7518b0d1 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -366,7 +366,7 @@ static struct uart_port serial21285_port = { .irq = NO_IRQ, .fifosize = 16, .ops = &serial21285_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, }; static void serial21285_setup_ports(void) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index bc36edff2058..179c1f065e60 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -31,7 +31,6 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> -#include <linux/mca.h> #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/tty.h> @@ -2027,12 +2026,6 @@ static void serial8250_config_port(struct uart_port *port, int flags) int ret; /* - * Don't probe for MCA ports on non-MCA machines. - */ - if (up->port.flags & UPF_BOOT_ONLYMCA && !MCA_bus) - return; - - /* * Find the region that we can probe for. This in turn * tells us whether we can probe for the type of port. */ @@ -2164,7 +2157,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) /* * Wait for transmitter & holding register to empty */ -static inline void wait_for_xmitr(struct uart_8250_port *up) +static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) { unsigned int status, tmout = 10000; @@ -2178,7 +2171,7 @@ static inline void wait_for_xmitr(struct uart_8250_port *up) if (--tmout == 0) break; udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + } while ((status & bits) != bits); /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { @@ -2218,7 +2211,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) * Now, do each character */ for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); + wait_for_xmitr(up, UART_LSR_THRE); /* * Send the character out. @@ -2226,7 +2219,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) */ serial_out(up, UART_TX, *s); if (*s == 10) { - wait_for_xmitr(up); + wait_for_xmitr(up, UART_LSR_THRE); serial_out(up, UART_TX, 13); } } @@ -2235,8 +2228,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) * Finally, wait for transmitter to become empty * and restore the IER */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier | UART_IER_THRI); } static int serial8250_console_setup(struct console *co, char *options) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 9fd1925de361..0d38f0f2ae29 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -23,7 +23,7 @@ config SERIAL_8250 work.) To compile this driver as a module, choose M here: the - module will be called serial. + module will be called 8250. [WARNING: Do not compile this driver as a module if you are using non-standard serial ports, since the configuration information will be lost when the driver is unloaded. This limitation may be lifted diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 3490022e9fdc..429de2723a1c 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -566,7 +566,7 @@ static struct uart_amba_port amba_ports[UART_NR] = { .uartclk = 14745600, .fifosize = 16, .ops = &amba_pl010_pops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .dtr_mask = 1 << 5, @@ -581,7 +581,7 @@ static struct uart_amba_port amba_ports[UART_NR] = { .uartclk = 14745600, .fifosize = 16, .ops = &amba_pl010_pops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .dtr_mask = 1 << 7, diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 8ef999481f93..ce7b2e4ecd17 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -410,7 +410,7 @@ static struct uart_port clps711x_ports[UART_NR] = { .fifosize = 16, .ops = &clps711x_pops, .line = 0, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, }, { .iobase = SYSCON2, @@ -419,7 +419,7 @@ static struct uart_port clps711x_ports[UART_NR] = { .fifosize = 16, .ops = &clps711x_pops, .line = 1, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, } }; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index fa3bbd6c751f..858048efe1ed 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -674,7 +674,7 @@ static struct imx_port imx_ports[] = { .irq = UART1_MINT_RX, .uartclk = 16000000, .fifosize = 8, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, .line = 0, }, @@ -690,7 +690,7 @@ static struct imx_port imx_ports[] = { .irq = UART2_MINT_RX, .uartclk = 16000000, .fifosize = 8, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, .line = 1, }, diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 1bd93168f504..ff7b60b4de37 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -665,21 +665,21 @@ void __init sa1100_register_uart(int idx, int port) sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0; sa1100_ports[idx].port.mapbase = _Ser1UTCR0; sa1100_ports[idx].port.irq = IRQ_Ser1UART; - sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; break; case 2: sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0; sa1100_ports[idx].port.mapbase = _Ser2UTCR0; sa1100_ports[idx].port.irq = IRQ_Ser2ICP; - sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; break; case 3: sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0; sa1100_ports[idx].port.mapbase = _Ser3UTCR0; sa1100_ports[idx].port.irq = IRQ_Ser3UART; - sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; break; default: diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 943770470b9d..0717abfdae06 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -332,7 +332,7 @@ uart_get_baud_rate(struct uart_port *port, struct termios *termios, struct termios *old, unsigned int min, unsigned int max) { unsigned int try, baud, altbaud = 38400; - unsigned int flags = port->flags & UPF_SPD_MASK; + upf_t flags = port->flags & UPF_SPD_MASK; if (flags == UPF_SPD_HI) altbaud = 57600; @@ -615,8 +615,9 @@ static int uart_set_info(struct uart_state *state, struct serial_struct new_serial; struct uart_port *port = state->port; unsigned long new_port; - unsigned int change_irq, change_port, old_flags, closing_wait; + unsigned int change_irq, change_port, closing_wait; unsigned int old_custom_divisor, close_delay; + upf_t old_flags, new_flags; int retval = 0; if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) @@ -655,6 +656,7 @@ static int uart_set_info(struct uart_state *state, new_serial.type != port->type; old_flags = port->flags; + new_flags = new_serial.flags; old_custom_divisor = port->custom_divisor; if (!capable(CAP_SYS_ADMIN)) { @@ -664,10 +666,10 @@ static int uart_set_info(struct uart_state *state, (close_delay != state->close_delay) || (closing_wait != state->closing_wait) || (new_serial.xmit_fifo_size != port->fifosize) || - (((new_serial.flags ^ old_flags) & ~UPF_USR_MASK) != 0)) + (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) goto exit; port->flags = ((port->flags & ~UPF_USR_MASK) | - (new_serial.flags & UPF_USR_MASK)); + (new_flags & UPF_USR_MASK)); port->custom_divisor = new_serial.custom_divisor; goto check_and_exit; } @@ -764,7 +766,7 @@ static int uart_set_info(struct uart_state *state, port->irq = new_serial.irq; port->uartclk = new_serial.baud_base * 16; port->flags = (port->flags & ~UPF_CHANGE_MASK) | - (new_serial.flags & UPF_CHANGE_MASK); + (new_flags & UPF_CHANGE_MASK); port->custom_divisor = new_serial.custom_divisor; state->close_delay = close_delay; state->closing_wait = closing_wait; @@ -1870,7 +1872,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) mutex_lock(&state->mutex); if (state->info && state->info->flags & UIF_INITIALIZED) { - struct uart_ops *ops = port->ops; + const struct uart_ops *ops = port->ops; spin_lock_irq(&port->lock); ops->stop_tx(port); @@ -1932,7 +1934,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) } if (state->info && state->info->flags & UIF_INITIALIZED) { - struct uart_ops *ops = port->ops; + const struct uart_ops *ops = port->ops; int ret; ops->set_mctrl(port, 0); diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index d4a1f0e798c1..d0490f67f597 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -506,7 +506,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .uartclk = 14745600/2, .fifosize = 16, .ops = &lh7a40x_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, }, @@ -519,7 +519,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .uartclk = 14745600/2, .fifosize = 16, .ops = &lh7a40x_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, }, @@ -532,7 +532,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { .uartclk = 14745600/2, .fifosize = 16, .ops = &lh7a40x_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 2, }, }, diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index a9e070759628..0111206327ca 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1113,10 +1113,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xfffffe80, .mapbase = 0xfffffe80, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 25, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCI, @@ -1128,10 +1128,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)SCIF0, .mapbase = SCIF0, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 55, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1142,10 +1142,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)SCIF2, .mapbase = SCIF2, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 59, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCIF, @@ -1157,10 +1157,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xfffffe80, .mapbase = 0xfffffe80, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 25, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCI, @@ -1171,10 +1171,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xa4000150, .mapbase = 0xa4000150, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 59, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCIF, @@ -1185,10 +1185,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xa4000140, .mapbase = 0xa4000140, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 55, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 2, }, .type = PORT_IRDA, @@ -1200,10 +1200,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xA4430000, .mapbase = 0xA4430000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 25, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1215,10 +1215,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xffe00000, .mapbase = 0xffe00000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 25, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1230,10 +1230,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xffe80000, .mapbase = 0xffe80000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 43, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1245,10 +1245,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xffe00000, .mapbase = 0xffe00000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 25, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCI, @@ -1259,10 +1259,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xffe80000, .mapbase = 0xffe80000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 43, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCIF, @@ -1274,10 +1274,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xfe600000, .mapbase = 0xfe600000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 55, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1288,10 +1288,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xfe610000, .mapbase = 0xfe610000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 75, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCIF, @@ -1302,10 +1302,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xfe620000, .mapbase = 0xfe620000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 79, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 2, }, .type = PORT_SCIF, @@ -1317,10 +1317,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xffe80000, .mapbase = 0xffe80000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 43, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1332,10 +1332,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xffe00000, .mapbase = 0xffe00000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 26, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1346,10 +1346,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0xffe80000, .mapbase = 0xffe80000, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 43, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCIF, @@ -1359,10 +1359,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) { .port = { - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 42, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCIF, @@ -1374,10 +1374,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0x00ffffb0, .mapbase = 0x00ffffb0, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 54, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCI, @@ -1388,10 +1388,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0x00ffffb8, .mapbase = 0x00ffffb8, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 58, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCI, @@ -1402,10 +1402,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0x00ffffc0, .mapbase = 0x00ffffc0, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 62, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 2, }, .type = PORT_SCI, @@ -1417,10 +1417,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0x00ffff78, .mapbase = 0x00ffff78, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 90, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 0, }, .type = PORT_SCI, @@ -1431,10 +1431,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0x00ffff80, .mapbase = 0x00ffff80, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 94, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 1, }, .type = PORT_SCI, @@ -1445,10 +1445,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = { .port = { .membase = (void *)0x00ffff88, .mapbase = 0x00ffff88, - .iotype = SERIAL_IO_MEM, + .iotype = UPIO_MEM, .irq = 98, .ops = &sci_uart_ops, - .flags = ASYNC_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF, .line = 2, }, .type = PORT_SCI, diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 9a3665b34d97..bc67442c6b4c 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -669,7 +669,7 @@ static int sunsu_startup(struct uart_port *port) * if it is, then bail out, because there's likely no UART * here. */ - if (!(up->port.flags & ASYNC_BUGGY_UART) && + if (!(up->port.flags & UPF_BUGGY_UART) && (serial_inp(up, UART_LSR) == 0xff)) { printk("ttyS%d: LSR safety check engaged!\n", up->port.line); return -ENODEV; @@ -707,7 +707,7 @@ static int sunsu_startup(struct uart_port *port) up->ier = UART_IER_RLSI | UART_IER_RDI; serial_outp(up, UART_IER, up->ier); - if (up->port.flags & ASYNC_FOURPORT) { + if (up->port.flags & UPF_FOURPORT) { unsigned int icp; /* * Enable interrupts on the AST Fourport board @@ -740,7 +740,7 @@ static void sunsu_shutdown(struct uart_port *port) serial_outp(up, UART_IER, 0); spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & ASYNC_FOURPORT) { + if (up->port.flags & UPF_FOURPORT) { /* reset interrupts on the AST Fourport board */ inb((up->port.iobase & 0xfe0) | 0x1f); up->port.mctrl |= TIOCM_OUT1; @@ -1132,7 +1132,7 @@ ebus_done: spin_lock_irqsave(&up->port.lock, flags); - if (!(up->port.flags & ASYNC_BUGGY_UART)) { + if (!(up->port.flags & UPF_BUGGY_UART)) { /* * Do a simple existence test first; if we fail this, there's * no point trying anything else. @@ -1170,7 +1170,7 @@ ebus_done: * manufacturer would be stupid enough to design a board * that conflicts with COM 1-4 --- we hope! */ - if (!(up->port.flags & ASYNC_SKIP_TEST)) { + if (!(up->port.flags & UPF_SKIP_TEST)) { serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); status1 = serial_inp(up, UART_MSR) & 0xF0; serial_outp(up, UART_MCR, save_mcr); @@ -1371,7 +1371,7 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) } while ((status & BOTH_EMPTY) != BOTH_EMPTY); /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & ASYNC_CONS_FLOW) { + if (up->port.flags & UPF_CONS_FLOW) { tmout = 1000000; while (--tmout && ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) @@ -1513,7 +1513,7 @@ static int __init sunsu_serial_init(void) up->su_type == SU_PORT_KBD) continue; - up->port.flags |= ASYNC_BOOT_AUTOCONF; + up->port.flags |= UPF_BOOT_AUTOCONF; up->port.type = PORT_UNKNOWN; up->port.uartclk = (SU_BASE_BAUD * 16); |