UHCI: workaround for Asus motherboard

This patch (as798) adds a workaround to uhci-hcd.  At least one Asus
motherboard is wired in such a way that any device attached to a
suspended UHCI controller will prevent the system from entering
suspend-to-RAM by immediately waking it up.  The only way around the
problem is to turn the controller off instead of suspending it.

This fixes Bugzilla #6193.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 39 insertions, 5 deletions

diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 45ee6920a850..226bf3de8edd 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -40,6 +40,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/usb.h>
 #include <linux/bitops.h>
+#include <linux/dmi.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -196,12 +197,42 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
 	return 0;
 }
 
+static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
+{
+	static struct dmi_system_id broken_wakeup_table[] = {
+		{
+			.ident = "Asus A7V8X",
+			.matches = {
+				DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK"),
+				DMI_MATCH(DMI_BOARD_NAME, "A7V8X"),
+				DMI_MATCH(DMI_BOARD_VERSION, "REV 1.xx"),
+			}
+		},
+		{ }
+	};
+	int port;
+
+	/* One of Asus's motherboards has a bug which causes it to
+	 * wake up immediately from suspend-to-RAM if any of the ports
+	 * are connected.  In such cases we will not set EGSM.
+	 */
+	if (dmi_check_system(broken_wakeup_table)) {
+		for (port = 0; port < uhci->rh_numports; ++port) {
+			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+					USBPORTSC_CCS)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
 __releases(uhci->lock)
 __acquires(uhci->lock)
 {
 	int auto_stop;
-	int int_enable;
+	int int_enable, egsm_enable;
 
 	auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
 	dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
@@ -217,15 +248,18 @@ __acquires(uhci->lock)
 	}
 
 	/* Enable resume-detect interrupts if they work.
-	 * Then enter Global Suspend mode, still configured.
+	 * Then enter Global Suspend mode if _it_ works, still configured.
 	 */
+	egsm_enable = USBCMD_EGSM;
 	uhci->working_RD = 1;
 	int_enable = USBINTR_RESUME;
-	if (resume_detect_interrupts_are_broken(uhci)) {
+	if (remote_wakeup_is_broken(uhci))
+		egsm_enable = 0;
+	if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable)
 		uhci->working_RD = int_enable = 0;
-	}
+
 	outw(int_enable, uhci->io_addr + USBINTR);
-	outw(USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD);
+	outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD);
 	mb();
 	udelay(5);