path: root/Makefile

# Makefile.in generated by automake 1.10.1 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.





pkgdatadir = $(datadir)/valgrind
pkglibdir = $(libdir)/valgrind
pkgincludedir = $(includedir)/valgrind
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
DIST_COMMON = README $(am__configure_deps) $(dist_noinst_DATA) \
	$(dist_val_DATA) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/config.h.in $(srcdir)/glibc-2.X.supp.in \
	$(srcdir)/valgrind.pc.in $(srcdir)/valgrind.spec.in \
	$(top_srcdir)/Makefile.all.am $(top_srcdir)/configure \
	$(top_srcdir)/drd/scripts/download-and-build-splash2.in \
	$(top_srcdir)/fat/Makefile.in AUTHORS COPYING INSTALL NEWS \
	compile config.guess config.sub depcomp install-sh missing
#am__append_1 = valt_load_address_x86_linux.lds
#am__append_2 = valt_load_address_x86_linux.lds
am__append_3 = valt_load_address_amd64_linux.lds
am__append_4 = valt_load_address_amd64_linux.lds
#am__append_5 = valt_load_address_ppc32_linux.lds
#am__append_6 = valt_load_address_ppc32_linux.lds
#am__append_7 = valt_load_address_ppc64_linux.lds
#am__append_8 = valt_load_address_ppc64_linux.lds
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = valgrind.spec valgrind.pc glibc-2.X.supp \
	fat/Makefile drd/scripts/download-and-build-splash2
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(valdir)" "$(DESTDIR)$(pkgconfigdir)" \
	"$(DESTDIR)$(incincdir)"
dist_valDATA_INSTALL = $(INSTALL_DATA)
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_noinst_DATA) $(dist_val_DATA) $(pkgconfig_DATA)
nodist_incincHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(nodist_incinc_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/steph/compile/valgrind/missing --run aclocal-1.10
AMTAR = ${SHELL} /home/steph/compile/valgrind/missing --run tar
AR = /usr/bin/ar
AUTOCONF = ${SHELL} /home/steph/compile/valgrind/missing --run autoconf
AUTOHEADER = ${SHELL} /home/steph/compile/valgrind/missing --run autoheader
AUTOMAKE = ${SHELL} /home/steph/compile/valgrind/missing --run automake-1.10
AWK = gawk
BOOST_CFLAGS = 
BOOST_LIBS = -lboost_thread-mt -m64
CC = gcc
CCAS = gcc
CCASDEPMODE = depmode=gcc3
CCASFLAGS = -Wno-long-long
CCDEPMODE = depmode=gcc3
CFLAGS = -Wno-long-long -Wno-pointer-sign -Wdeclaration-after-statement -fno-stack-protector
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFAULT_SUPP = exp-ptrcheck.supp xfree-3.supp xfree-4.supp glibc-2.X-drd.supp glibc-2.34567-NPTL-helgrind.supp glibc-2.X.supp 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DIFF = diff -u
DISTCHECK_CONFIGURE_FLAGS = --with-vex=$(top_srcdir)/VEX
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FLAG_FNO_STACK_PROTECTOR = -fno-stack-protector
FLAG_M32 = -m32
FLAG_M64 = -m64
FLAG_MAIX32 = 
FLAG_MAIX64 = 
FLAG_MMMX = -mmmx
FLAG_MSSE = -msse
FLAG_UNLIMITED_INLINE_UNIT_GROWTH = --param inline-unit-growth=900
FLAG_WDECL_AFTER_STMT = -Wdeclaration-after-statement
FLAG_W_EXTRA = -Wextra
FLAG_W_NO_FORMAT_ZERO_LENGTH = -Wno-format-zero-length
GDB = /usr/bin/gdb
GLIBC_VERSION = 2.8
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS = 
LIBOBJS = 
LIBS = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /home/steph/compile/valgrind/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MPI_CC = mpicc
OBJEXT = o
PACKAGE = valgrind
PACKAGE_BUGREPORT = valgrind-users@lists.sourceforge.net
PACKAGE_NAME = Valgrind
PACKAGE_STRING = Valgrind 3.5.0.SVN
PACKAGE_TARNAME = valgrind
PACKAGE_VERSION = 3.5.0.SVN
PATH_SEPARATOR = :
PERL = /usr/bin/perl
PKG_CONFIG = /usr/bin/pkg-config
PREFERRED_STACK_BOUNDARY = 
QTCORE_CFLAGS = -DQT_SHARED -I/usr/include/QtCore  
QTCORE_LIBS = -lQtCore  
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
VALT_LOAD_ADDRESS = 0x38000000
VERSION = 3.5.0.SVN
VEX_DIR = $(top_srcdir)/VEX
VGCONF_ARCH_PRI = amd64
VGCONF_OS = linux
VGCONF_PLATFORM_PRI_CAPS = AMD64_LINUX
VGCONF_PLATFORM_SEC_CAPS = 
abs_builddir = /home/steph/compile/valgrind
abs_srcdir = /home/steph/compile/valgrind
abs_top_builddir = /home/steph/compile/valgrind
abs_top_srcdir = /home/steph/compile/valgrind
ac_ct_CC = gcc
ac_ct_CXX = g++
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /home/steph/compile/valgrind/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_builddir = .
top_srcdir = .
AUTOMAKE_OPTIONS = foreign 1.7 dist-bzip2
valdir = $(libdir)/valgrind
inplacedir = $(top_builddir)/.in_place
TOOLS = memcheck \
		cachegrind \
		callgrind \
		fat \
		massif \
		lackey \
		none \
		helgrind \
		drd

EXP_TOOLS = exp-omega \
		exp-ptrcheck


# Put docs last because building the HTML is slow and we want to get
# everything else working before we try it.
SUBDIRS = include coregrind . tests perf auxprogs $(TOOLS) $(EXP_TOOLS) docs
DIST_SUBDIRS = $(SUBDIRS)
SUPP_FILES = \
	glibc-2.2.supp glibc-2.3.supp glibc-2.4.supp glibc-2.5.supp \
	glibc-2.6.supp glibc-2.7.supp glibc-2.X.supp.in \
	aix5libc.supp xfree-3.supp xfree-4.supp \
	glibc-2.34567-NPTL-helgrind.supp \
	glibc-2.2-LinuxThreads-helgrind.supp \
	glibc-2.X-drd.supp \
	exp-ptrcheck.supp

DEFAULT_SUPP_FILES = exp-ptrcheck.supp xfree-3.supp xfree-4.supp glibc-2.X-drd.supp glibc-2.34567-NPTL-helgrind.supp glibc-2.X.supp 

# We include all .supp files in the distribution, but only install
# default.supp.
dist_val_DATA = default.supp
dist_noinst_DATA = $(SUPP_FILES)
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = valgrind.pc
incincdir = $(includedir)/valgrind
nodist_incinc_HEADERS = $(VEX_PUBLIC_HDRS)
BUILT_SOURCES = default.supp valgrind.pc $(am__append_1) \
	$(am__append_3) $(am__append_5) $(am__append_7)
CLEANFILES = $(am__append_2) $(am__append_4) $(am__append_6) \
	$(am__append_8)
DISTCLEANFILES = default.supp

# Nb: no need to include any Makefile.am files here, or files included from
# them, as automake includes them automatically.
EXTRA_DIST = \
	ACKNOWLEDGEMENTS \
	README_DEVELOPERS \
	README_PACKAGERS \
	README_MISSING_SYSCALL_OR_IOCTL \
	valgrind.spec.in valgrind.pc.in \
	$(vex_primary_sources) \
	vg-in-place


# These list the bits of vex we need to install
VEX_PUBLIC_HDRS = \
	$(top_srcdir)/VEX/pub/libvex_guest_amd64.h \
	$(top_srcdir)/VEX/pub/libvex_ir.h \
	$(top_srcdir)/VEX/pub/libvex_guest_ppc32.h \
	$(top_srcdir)/VEX/pub/libvex_guest_ppc64.h \
	$(top_srcdir)/VEX/pub/libvex_basictypes.h \
	$(top_srcdir)/VEX/pub/libvex_guest_offsets.h \
	$(top_srcdir)/VEX/pub/libvex_emwarn.h \
	$(top_srcdir)/VEX/pub/libvex.h \
	$(top_srcdir)/VEX/pub/libvex_trc_values.h \
	$(top_srcdir)/VEX/pub/libvex_guest_arm.h \
	$(top_srcdir)/VEX/pub/libvex_guest_x86.h


# These list the bits of vex we need to copy into the tarball
vex_primary_sources = \
	VEX/quote.txt \
	VEX/newline.txt \
	VEX/HACKING.README \
	VEX/LICENSE.README \
	VEX/LICENSE.GPL \
	VEX/Makefile \
	VEX/auxprogs/genoffsets.c \
	VEX/pub/libvex_guest_amd64.h \
	VEX/pub/libvex_ir.h \
	VEX/pub/libvex_guest_ppc32.h \
	VEX/pub/libvex_guest_ppc64.h \
	VEX/pub/libvex_basictypes.h \
	VEX/pub/libvex_guest_offsets.h \
	VEX/pub/libvex_emwarn.h \
	VEX/pub/libvex.h \
	VEX/pub/libvex_trc_values.h \
	VEX/pub/libvex_guest_arm.h \
	VEX/pub/libvex_guest_x86.h \
	VEX/priv/ir/irmatch.c \
	VEX/priv/ir/irmatch.h \
	VEX/priv/ir/irdefs.c \
	VEX/priv/ir/iropt.c \
	VEX/priv/ir/iropt.h \
	VEX/priv/host-ppc/isel.c \
	VEX/priv/host-ppc/hdefs.c \
	VEX/priv/host-ppc/hdefs.h \
	VEX/priv/main/vex_svnversion.h \
	VEX/priv/main/vex_globals.c \
	VEX/priv/main/vex_globals.h \
	VEX/priv/main/vex_main.c \
	VEX/priv/main/vex_util.c \
	VEX/priv/main/vex_util.h \
	VEX/priv/guest-arm/ghelpers.c \
	VEX/priv/guest-arm/gdefs.h \
	VEX/priv/guest-arm/toIR.c \
	VEX/priv/guest-x86/ghelpers.c \
	VEX/priv/guest-x86/gdefs.h \
	VEX/priv/guest-x86/toIR.c \
	VEX/priv/guest-generic/g_generic_x87.c \
	VEX/priv/guest-generic/g_generic_x87.h \
	VEX/priv/guest-generic/bb_to_IR.c \
	VEX/priv/guest-generic/bb_to_IR.h \
	VEX/priv/host-arm/isel.c \
	VEX/priv/host-arm/hdefs.c \
	VEX/priv/host-arm/hdefs.h \
	VEX/priv/host-x86/isel.c \
	VEX/priv/host-x86/hdefs.c \
	VEX/priv/host-x86/hdefs.h \
	VEX/priv/guest-amd64/ghelpers.c \
	VEX/priv/guest-amd64/gdefs.h \
	VEX/priv/guest-amd64/toIR.c \
	VEX/priv/guest-ppc/ghelpers.c \
	VEX/priv/guest-ppc/gdefs.h \
	VEX/priv/guest-ppc/toIR.c \
	VEX/priv/host-generic/reg_alloc2.c \
	VEX/priv/host-generic/h_generic_regs.c \
	VEX/priv/host-generic/h_generic_regs.h \
	VEX/priv/host-generic/h_generic_simd64.c \
	VEX/priv/host-generic/h_generic_simd64.h \
	VEX/priv/host-amd64/isel.c \
	VEX/priv/host-amd64/hdefs.c \
	VEX/priv/host-amd64/hdefs.h

all: $(BUILT_SOURCES) config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/Makefile.all.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: # $(am__configure_deps) 
	cd $(top_srcdir) && $(AUTOHEADER)
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
valgrind.spec: $(top_builddir)/config.status $(srcdir)/valgrind.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
valgrind.pc: $(top_builddir)/config.status $(srcdir)/valgrind.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
glibc-2.X.supp: $(top_builddir)/config.status $(srcdir)/glibc-2.X.supp.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
fat/Makefile: $(top_builddir)/config.status $(top_srcdir)/fat/Makefile.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
drd/scripts/download-and-build-splash2: $(top_builddir)/config.status $(top_srcdir)/drd/scripts/download-and-build-splash2.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-dist_valDATA: $(dist_val_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(valdir)" || $(MKDIR_P) "$(DESTDIR)$(valdir)"
	@list='$(dist_val_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_valDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(valdir)/$$f'"; \
	  $(dist_valDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(valdir)/$$f"; \
	done

uninstall-dist_valDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_val_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(valdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(valdir)/$$f"; \
	done
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
	@list='$(pkgconfig_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done
install-nodist_incincHEADERS: $(nodist_incinc_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(incincdir)" || $(MKDIR_P) "$(DESTDIR)$(incincdir)"
	@list='$(nodist_incinc_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_incincHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(incincdir)/$$f'"; \
	  $(nodist_incincHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(incincdir)/$$f"; \
	done

uninstall-nodist_incincHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_incinc_HEADERS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(incincdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(incincdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d $(distdir) || mkdir $(distdir)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(DATA) $(HEADERS) config.h all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(valdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(incincdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-dist_valDATA install-nodist_incincHEADERS \
	install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-exec-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-dist_valDATA uninstall-nodist_incincHEADERS \
	uninstall-pkgconfigDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-exec-am install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-local am--refresh check check-am clean \
	clean-generic clean-local ctags ctags-recursive dist dist-all \
	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip \
	distcheck distclean distclean-generic distclean-hdr \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dist_valDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-hook \
	install-html install-html-am install-info install-info-am \
	install-man install-nodist_incincHEADERS install-pdf \
	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
	tags-recursive uninstall uninstall-am uninstall-dist_valDATA \
	uninstall-nodist_incincHEADERS uninstall-pkgconfigDATA


# The kludge that passes for vex's build system can't handle parallel
# builds.  So, for the time being, serialise all Valgrind building.
# (this is equivalent to enforcing "make -j 1".
.NOTPARALLEL:
# No need to generate valt_load_address*.lds; the final executables
# can be linked to be at any address.  They will be relocated by
# AIX kernel when they are loaded.
# Ditto

default.supp: $(DEFAULT_SUPP_FILES)
	echo "# This is a generated file, composed of the following suppression rules:" > default.supp
	echo "# " $(DEFAULT_SUPP_FILES) >> default.supp
	cat $(DEFAULT_SUPP_FILES) >> default.supp

regtest: check
	/usr/bin/perl tests/vg_regtest $(TOOLS) $(EXP_TOOLS)
nonexp-regtest: check
	/usr/bin/perl tests/vg_regtest $(TOOLS)
exp-regtest: check
	/usr/bin/perl tests/vg_regtest $(EXP_TOOLS)

perf: check
	/usr/bin/perl perf/vg_perf perf

install-exec-hook:
	$(mkinstalldirs) $(DESTDIR)$(valdir)

all-local: default.supp
	mkdir -p $(inplacedir)
	rm -f $(inplacedir)/default.supp
	ln -s ../default.supp $(inplacedir)

clean-local:
	rm -rf $(inplacedir)

# Generate a linker script for linking the binaries.  This is the
# standard gcc linker script, except hacked so that an alternative
# load address can be specified by (1) asking gcc to use this script
# (-Wl,-T,valt_load_address.lds) and (2) setting the symbol
# valt_load_address to the required value
# (-Wl,-defsym,valt_load_address=0x70000000).
#
# Extract ld's default linker script and hack it to our needs.
# First we cut everything above and below the "=====..." lines at the top
# and bottom.
# Then we have to replace the load address with "valt_load_address".
# The line to replace in has one of the following two forms:
#
#   . = 0x08048000 + SIZEOF_HEADERS;
#
# or
#   PROVIDE (__executable_start = 0x08048000); . = 0x08048000 + SIZEOF_HEADERS;
#
# So we search for the line with a hex value "+ SIZEOF_HEADERS", and replace
# all the hex values in that line with "valt_load_address".
valt_load_address_x86_linux.lds: Makefile
	$(CC) -m32 -Wl,--verbose -nostdlib 2>&1 | sed \
		-e '1,/^=====\+$$/d' \
		-e '/^=====\+$$/,/.\*/d' \
		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
	|| rm -f $@

valt_load_address_amd64_linux.lds: Makefile
	$(CC) -m64 -Wl,--verbose -nostdlib 2>&1 | sed \
		-e '1,/^=====\+$$/d' \
		-e '/^=====\+$$/,/.\*/d' \
		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
	|| rm -f $@

valt_load_address_ppc32_linux.lds: Makefile
	$(CC) -m32 -Wl,--verbose -nostdlib 2>&1 | sed \
		-e '1,/^=====\+$$/d' \
		-e '/^=====\+$$/,/.\*/d' \
		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
	|| rm -f $@

valt_load_address_ppc64_linux.lds: Makefile
	$(CC) -m64 -Wl,--verbose -nostdlib 2>&1 | sed \
		-e '1,/^=====\+$$/d' \
		-e '/^=====\+$$/,/.\*/d' \
		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
	|| rm -f $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: