main: Don't delay update_display_timer(0) for up to 1 second

When using remote-viewer --full-screen with a VM/client with multiple
monitors, a race can be observed during auto-configuration. First, the
client monitors config is sent to the guest:
(remote-viewer:19480): GSpice-DEBUG: channel-main.c:1166 main-1:0: sending new monitors config to guest
(remote-viewer:19480): GSpice-DEBUG: channel-main.c:1183 main-1:0: monitor #0: 1920x1080+0+0 @ 32 bpp
(remote-viewer:19480): GSpice-DEBUG: channel-main.c:1183 main-1:0: monitor #1: 1920x1080+1920+0 @ 32 bpp

Then we receive messages from the agent which trigger a call to
update_display_timer(0)

This should cause the current monitors state to be sent to the server
very soon after this call. However, in the racy case, this is delayed
for nearly a second, and timer_set_display() ends up being called at the
wrong time, when information about the first display channel have been
received from the server, but not the second one.

When this happens, we inform the server that only one monitor is active,
then the server sends a MonitorsConfig message with 2 monitors (first
request we sent), and then with just 1 monitor (second request we sent).

This causes remote-viewer to show one fullscreen black window indicating
"Connected to server" on one monitor and a working fullscreen window on
the second monitor.

update_display_timer(0) schedules a timeout to be run with
g_timeout_add_seconds(0). However, g_timeout_add_seconds() schedules
timers with a granularity of a second, so the timeout we scheduled with
g_timeout_add_seconds() may fire up to 1 second later than when we
called it, while we really wanted it to fire as soon as possible.
Special-casing update_display_timer(0) and using g_timeout_add() in that
case avoid this issue. In theory, the race could probably still happen
with a very very bad timing, but in practice I don't think it will be
possible to trigger it after this change.

https://bugzilla.redhat.com/show_bug.cgi?id=1323092

1 files changed, 10 insertions, 1 deletions

diff --git a/src/channel-main.c b/src/channel-main.c
index efe7f4e..2d717c5 100644
--- a/src/channel-main.c
+++ b/src/channel-main.c
@@ -1559,7 +1559,16 @@ static void update_display_timer(SpiceMainChannel *channel, guint seconds)
     if (c->timer_id)
         g_source_remove(c->timer_id);
 
-    c->timer_id = g_timeout_add_seconds(seconds, timer_set_display, channel);
+    if (seconds != 0) {
+        c->timer_id = g_timeout_add_seconds(seconds, timer_set_display, channel);
+    } else {
+        /* We need to special case 0, as we want the callback to fire as soon
+         * as possible. g_timeout_add_seconds(0) would set up a timer which would fire
+         * at the next second boundary, which might be nearly 1 full second later.
+         */
+        c->timer_id = g_timeout_add(0, timer_set_display, channel);
+    }
+
 }
 
 /* coroutine context  */