summaryrefslogtreecommitdiff
path: root/hw/s390-virtio.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-4/+4
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-12s390-virtio: use specific endian ld/st_physAlexander Graf1-3/+3
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-20s390x: fix memory detection for guests > 64GBChristian Borntraeger1-5/+15
the s390 memory detection has a 16bit field that specifies the amount of increments. This patch adopts the memory size to always fit into that scheme. This also fixes virtio detection for these guests, since the descriptor page is located after the main memory. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-18s390x: virtio machine storage keysAlexander Graf1-12/+9
For emulation (and migration) we need to know about the guest's storage keys. These are separate from actual RAM contents, so we need to allocate them in parallel to RAM. While touching the file, this patch also adjusts the hypercall function to a new syntax that aligns better with tcg emulated code. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-18s390x: Prepare cpu.h for emulationAlexander Graf1-1/+1
We need to add some more logic to the CPU description to leverage emulation of an s390x CPU. This patch adds all the required helpers, fields in CPUState and constant definitions required for user and system emulation. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-12Replace cpu_physical_memory_rw were possibleStefan Weil1-2/+2
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys improves readability and allows removing some type casts. lduw_phys and ldl_phys were not used because both require aligned addresses. Therefore it is not possible to simply replace existing calls by one of these functions. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-20s390: Fix memory leakStefan Weil1-0/+1
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-26s390: compile fixesAlexander Graf1-0/+1
The s390 target doesn't compile out of the box anymore. This patch fixes all the obvious glitches that got introduced in the last few weeks. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson1-1/+1
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-02block: Catch attempt to attach multiple devices to a blockdevMarkus Armbruster1-1/+1
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo happily creates two SCSI disks connected to the same block device. It's all downhill from there. Device usb-storage deliberately attaches twice to the same blockdev, which fails with the fix in place. Detach before the second attach there. Also catch attempt to delete while a guest device model is attached. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster1-1/+1
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-18target-s390: add firmware codeAlexander Graf1-0/+26
This patch adds a firmware blob to the S390 target. The blob is a simple implementation of a virtio client that tries to read the second stage bootloader from sectors described as of offset 0x20 in the MBR. In combination with an updated zipl this allows for booting from virtio block devices. This firmware is built from the same sources as the second stage bootloader. You can find a virtio capable s390-tools in this repo: git://repo.or.cz/s390-tools.git Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09Implement virtio resetAlexander Graf1-4/+5
The guest may issue a RESET command for virtio. So far we didn't bother to implement it, but with my new bootloader we actually need it for Linux to get back to a safe state. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-04KVM: Rework VCPU state writeback APIJan Kiszka1-1/+0
This grand cleanup drops all reset and vmsave/load related synchronization points in favor of four(!) generic hooks: - cpu_synchronize_all_states in qemu_savevm_state_complete (initial sync from kernel before vmsave) - cpu_synchronize_all_post_init in qemu_loadvm_state (writeback after vmload) - cpu_synchronize_all_post_init in main after machine init - cpu_synchronize_all_post_reset in qemu_system_reset (writeback after system reset) These writeback points + the existing one of VCPU exec after cpu_synchronize_state map on three levels of writeback: - KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run) - KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped) - KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well) This level is passed to the arch-specific VCPU state writing function that will decide which concrete substates need to be written. That way, no writer of load, save or reset functions that interact with in-kernel KVM states will ever have to worry about synchronization again. That also means that a lot of reasons for races, segfaults and deadlocks are eliminated. cpu_synchronize_state remains untouched, just as Anthony suggested. We continue to need it before reading or writing of VCPU states that are also tracked by in-kernel KVM subsystems. Consequently, this patch removes many cpu_synchronize_state calls that are now redundant, just like remaining explicit register syncs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-01-20virtio-console: qdev conversion, new virtio-serial-busAmit Shah1-8/+0
This commit converts the virtio-console device to create a new virtio-serial bus that can host console and generic serial ports. The file hosting this code is now called virtio-serial-bus.c. The virtio console is now a very simple qdev device that sits on the virtio-serial-bus and communicates between the bus and qemu's chardevs. This commit also includes a few changes to the virtio backing code for pci and s390 to spawn the virtio-serial bus. As a result of the qdev conversion, we get rid of a lot of legacy code. The old-style way of instantiating a virtio console using -virtioconsole ... is maintained, but the new, preferred way is to use -device virtio-serial -device virtconsole,chardev=... With this commit, multiple devices as well as multiple ports with a single device can be supported. For multiple ports support, each port gets an IO vq pair. Since the guest needs to know in advance how many vqs a particular device will need, we have to set this number as a property of the virtio-serial device and also as a config option. In addition, we also spawn a pair of control IO vqs. This is an internal channel meant for guest-host communication for things like port open/close, sending port properties over to the guest, etc. This commit is a part of a series of other commits to get the full implementation of multiport support. Future commits will add other support as well as ride on the savevm version that we bump up here. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18S390: Bail out without KVMAlexander Graf1-0/+7
Currently only the S390 KVM target works. To keep users from accidently not using KVM, let's not even initialize the machine when KVM is not used. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18S390: Loop through virtio console devicesAlexander Graf1-1/+5
We used to always create one single virtio console device. This breaks when either zero of multiple virtio console devices are requested, so let's use the same code as on x86. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-16s390: Fix buggy assignmentStefan Weil1-1/+1
nd->model keeps dynamically allocated model names. So casting of a constant string is wrong here. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13s390: typo fixMichael S. Tsirkin1-1/+1
s390 code has an obvious typo, which results in: hw/s390-virtio.c: At top level: hw/s390-virtio.c:249: error: request for member ‘no_vga’ in something not a structure or union Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13s390: fix build on 32 bit hostMichael S. Tsirkin1-1/+1
Building on 32 bit host we get: hw/s390-virtio.c: In function ‘s390_init’: hw/s390-virtio.c:184: error: integer constant is too large for ‘unsigned long’ type 64 bit values must be ULL. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-12Set default console to virtio on S390xGerd Hoffmann1-0/+4
All "normal" system emulation targets in qemu I'm aware of display output on either VGA or serial output. Our S390x virtio machine doesn't have such kind of legacy hardware. So instead we need to default to a virtio console. Add flags to QEMUMachine to indicate which kind of default devices make sense for the machine in question. Use it for S390x: enable virtcon, disable serial, parallel and vga. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-05Add S390x virtio machine descriptionAlexander Graf1-0/+255
In order to use the new S390x virtio bus we just introduced, we also need a machine description that sets up the machine according to our PV specification. Let's add that machine description and be happy! Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 12:41:55 +0000