Revert "[ARM,AArch64] NFC. Add extra test cases for bswap lowering."

This reverts commit r269425, as it fails on Windows (Thumb only).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269451 91177308-0d34-0410-b5e6-96231b3b80d8

1 files changed, 0 insertions, 145 deletions

diff --git a/test/CodeGen/ARM/bswap.ll b/test/CodeGen/ARM/bswap.ll
deleted file mode 100644
index 281ff6004a5..00000000000
--- a/test/CodeGen/ARM/bswap.ll
+++ /dev/null
@@ -1,145 +0,0 @@
-; RUN: llc -march=arm -mattr=+v4t < %s | FileCheck -check-prefix PRE6 %s
-; RUN: llc -march=armeb -mattr=+v4t < %s | FileCheck -check-prefix PRE6BE %s
-; RUN: llc -march=arm -mattr=+v5t < %s | FileCheck -check-prefix PRE6 %s
-; RUN: llc -march=arm -mattr=+v5te < %s | FileCheck -check-prefix PRE6 %s
-; RUN: llc -march=arm -mattr=+v6 < %s | FileCheck -check-prefix REV %s
-; RUN: llc -march=armeb -mattr=+v6 < %s | FileCheck -check-prefix REVBE %s
-; RUN: llc -march=arm -mattr=+v6k < %s | FileCheck -check-prefix REV %s
-; RUN: llc -march=arm -mattr=+v6m < %s | FileCheck -check-prefix REV %s
-; RUN: llc -march=arm -mattr=+v6t2 < %s | FileCheck -check-prefix REV %s
-; RUN: llc -march=arm -mattr=+v7 < %s | FileCheck -check-prefix REV %s
-; RUN: llc -march=arm -mattr=+v8 < %s | FileCheck -check-prefix REV %s
-; RUN: llc -march=arm -mattr=+v8.1a < %s | FileCheck -check-prefix REV %s
-
-;; Test byte swap instrinsic lowering on ARM targets.
-
-;; The REV instruction only appeared in ARMv6 and later. Earlier
-;; supported architecture have to open-code this intrinsic.
-
-define i16 @bswap16(i16 %x) #0 {
-  %1 = tail call i16 @llvm.bswap.i16(i16 %x)
-  ret i16 %1
-; PRE6-LABEL: bswap16
-;; The source register patterns are all capable of matching a new
-;; register to avoid specifying allocation choices unnecessarily.
-; PRE6:       mov [[R1:r[0-9]+|lr]], #16711680
-; PRE6-NEXT:  and [[R2:r[0-9]+|lr]], [[R1]], [[R0:r[0-9]]], lsl #8
-; PRE6-NEXT:  orr [[R3:r[0-9]+|lr]], [[R2]], [[R0]], lsl #24
-; PRE6-NEXT:  lsr [[R4:r[0-9]+|lr]], [[R3]], #16
-
-; REV-LABEL: bswap16
-;; FIXME: It would ben nice if DAG legalization was taught to not
-;; promote the incoming reg to i32 in this case, so that the
-;; combiner could canonicalize this to (rotr (bswap x), 16), which
-;; would then get matched as REV16.
-; REV:      rev [[R0:r[0-9]+|lr]], {{r[0-9]+}}
-; REV-NEXT: lsr {{r[0-9]+}}, [[R0]], #16
-}
-
-define i32 @bswap32(i32 %x) #0 {
-  %1 = tail call i32 @llvm.bswap.i32(i32 %x)
-  ret i32 %1
-; PRE6-LABEL: bswap32
-; PRE6-DAG:   mov [[R0:r[0-9]+|lr]], #65280
-; PRE6-NOT:   DAG-BREAK!
-; PRE6-DAG:   and [[R0]], [[R0]], [[R1:r[0-9]+|lr]], lsr #8
-; PRE6-DAG:   orr [[R0]], [[R0]], [[R1]], lsr #24
-; PRE6-DAG:   mov [[R2:r[0-9]+|lr]], #16711680
-; PRE6-DAG:   and [[R2]], [[R2]], [[R1]], lsl #8
-; PRE6-DAG:   orr [[R1]], [[R2]], [[R1]], lsl #24
-; PRE6-NOT:   DAG-BREAK!
-; PRE6-DAG:   orr [[R1]], [[R1]], [[R0]]
-
-; REV-LABEL: bswap32
-; REV:       rev {{r[0-9]+|lr}}, {{r[0-9]+|lr}}
-; REV-NOT:   rev
-}
-
-define i48 @bswap48(i48 %x) #0 {
-  %1 = tail call i48 @llvm.bswap.i48(i48 %x)
-  ret i48 %1
-; PRE6-LABEL: bswap48
-; PRE6-DAG:   mov [[R0:r[0-9]+|lr]], #65280
-; PRE6-DAG:   mov [[R1:r[0-9]+|lr]], #16711680
-; PRE6-NOT:   DAG-BREAK!
-; PRE6-DAG:   and [[R0]], [[R0]], [[R2:r[0-9]+|lr]], lsr #8
-; PRE6-DAG:   and [[R3:r[0-9]+|lr]], [[R1]], [[R2]], lsl #8
-; PRE6-DAG:   orr [[R0]], [[R0]], [[R2]], lsr #24
-; PRE6-DAG:   orr [[R2]], [[R3]], [[R2]], lsl #24
-; PRE6-DAG:   orr [[R0]], [[R2]], [[R0]]
-; PRE6-NOT:   DAG-BREAK!
-; PRE6-DAG:   and [[R2]], [[R1]], [[R4:r[0-9]+|lr]], lsl #8
-; PRE6-DAG:   orr [[R2]], [[R2]], [[R4]], lsl #24
-; PRE6-DAG:   lsr [[R4]], [[R0]], #16
-; PRE6-DAG:   lsr [[R2]], [[R2]], #16
-; PRE6-NOT:   DAG-BREAK!
-; PRE6-DAG:   orr [[R2]], [[R2]], [[R0]], lsl #16
-
-; PRE6BE-LABEL: bswap48
-; PRE6BE-DAG: mov [[R0:r[0-9]+|lr]], #65280
-; PRE6BE-DAG: mov [[R1:r[0-9]+|lr]], #16711680
-; PRE6-NOT:   DAG-BREAK!
-; PRE6BE-DAG: and [[R0]], [[R0]], [[R2:r[0-9]+|lr]], lsr #8
-; PRE6BE-DAG: and [[R3:r[0-9]+|lr]], [[R1]], [[R2:r[0-9]+|lr]], lsl #8
-; PRE6BE-DAG: orr [[R0]], [[R0]], [[R2]], lsr #24
-; PRE6BE-DAG: orr [[R2]], [[R3]], [[R2]], lsl #24
-; PRE6BE-DAG: orr [[R0]], [[R2]], [[R0]]
-; PRE6-NOT:   DAG-BREAK!
-; PRE6BE-DAG: and [[R2]], [[R1]], [[R4:r[0-9]+|lr]], lsl #8
-; PRE6BE-DAG: orr [[R4]], [[R2]], [[R4]], lsl #24
-; PRE6BE-DAG: lsr [[R4]], [[R4]], #16
-; PRE6BE-DAG: lsr [[R4]], [[R0]], #16
-; PRE6-NOT:   DAG-BREAK!
-; PRE6BE-DAG: orr [[R2]], [[R4]], [[R0]], lsl #16
-
-; REV-LABEL: bswap48
-; REV-DAG:   rev [[R0:r[0-9]+]], [[R1:r[0-9]+]]
-; REV-DAG:   rev [[R1]], [[R2:r[0-9]+]]
-; REV-DAG:   lsr [[R1]], [[R1]], #16
-; REV-DAG:   lsr [[R2]], [[R0]], #16
-; REV-DAG:   orr [[R1]], [[R1]], [[R0]], lsl #16
-
-; REVBE-LABEL: bswap48
-; Until PR24879 is fixed, I can't match [[R0:r[0-9]+|lr]] in a
-; backreference. Having to stick to just r[0-9]+ for now, which
-; is *very* likely to be the register selection :-).
-; REVBE-DAG: rev [[R0:r[0-9]+]], [[R0]]
-; Need to break DAG block here to stop R1 or R2 clobbering the
-; self rev above.
-; REVBE-NEXT: rev [[R1:r[0-9]+|lr]], [[R2:r[0-9]+|lr]]
-; REVBE-DAG: lsr [[R0]], [[R0]], #16
-; REVBE-DAG: lsr [[R0]], [[R1]], #16
-; REVBE-DAG: orr [[R2]], [[R0]], [[R1]], lsl #16
-}
-
-define i64 @bswap64(i64 %x) #0 {
-  %1 = tail call i64 @llvm.bswap.i64(i64 %x)
-  ret i64 %1
-; PRE6-LABEL: bswap64
-; PRE6-DAG: mov [[R0:r[0-9]+|lr]], #65280
-; PRE6-DAG: mov [[R1:r[0-9]+|lr]], #16711680
-; PRE6-NOT:   DAG-BREAK!
-; PRE6-DAG: and [[R2:r[0-9]+|lr]], [[R0]], [[R3:r[0-9]+|lr]], lsr #8
-; PRE6-DAG: and [[R4:r[0-9]+|lr]], [[R1]], [[R3]], lsl #8
-; PRE6-DAG: orr [[R2]], [[R2]], [[R3]], lsr #24
-; PRE6:     orr [[R3]], [[R4]], [[R3]], lsl #24
-; PRE6-NOT: DAG-BREAK!
-; PRE6-DAG: and [[R4]], [[R1]], [[R5:r[0-9]+|lr]], lsl #8
-; PRE6-DAG: orr [[R2]], [[R3]], [[R2]]
-; PRE6-DAG: and [[R3]], [[R0]], [[R5]], lsr #8
-; PRE6-DAG: orr [[R3]], [[R3]], [[R5]], lsr #24
-; PRE6-DAG: orr [[R5]], [[R4]], [[R5]], lsl #24
-; PRE6-DAG: orr [[R3]], [[R5]], [[R3]]
-
-; REV-LABEL: bswap64
-; Just check that the two 32-bit words are reversed, not bothered
-; so much about regiter selection here.
-; REV:     rev
-; REV:     rev
-; REV-NOT: rev
-}
-
-declare i16 @llvm.bswap.i16(i16)
-declare i32 @llvm.bswap.i32(i32)
-declare i48 @llvm.bswap.i48(i48)
-declare i64 @llvm.bswap.i64(i64)