summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2012-08-27drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERRJulia Lawall1-1/+1
Change the call to PTR_ERR to access the value just tested by IS_ERR. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; @@ ( if (IS_ERR(e)) { ... PTR_ERR(e) ... } | if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... } | *if (IS_ERR(e)) { ... * PTR_ERR(e1) ... } ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-08-16iio: lm3533-als: Fix build warningsAxel Lin1-2/+2
Fix below build warnings: CC [M] drivers/iio/light/lm3533-als.o drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.show') [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.store') [enabled by default] Signed-off-by: Axel Lin <axel.lin@gmail.com>
2012-08-16iio/adjd_s311: Fix potential memory leak in adjd_s311_update_scan_mode()Alexey Khoroshilov1-3/+4
Do not leak memory by updating pointer with potentially NULL realloc return value. There is no need to preserve data in the buffer, so replace krealloc() by kfree()-kmalloc() pair. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-08-16iio: frequency: ADF4350: Fix potential reference div factor overflow.Michael Hennerich1-9/+15
With small channel spacing values and high reference frequencies it is possible to exceed the range of the 10-bit counter. Workaround by checking the range and widening some constrains. We don't use the REG1_PHASE value in this case the datasheet recommends to set it to 1 if not used. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-15iio: fix pointer cast warningPeter Meerwald1-1/+1
fix compile warning reported by Fengguang Wu: drivers/iio/light/adjd_s311.c: In function 'adjd_s311_trigger_handler': drivers/iio/light/adjd_s311.c:188:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/iio/light/adjd_s311.c:188:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 185 } 186 187 if (indio_dev->scan_timestamp) > 188 *(s64 *)((phys_addr_t)data->buffer + ALIGN(len, sizeof(s64))) 189 = time_ns; 190 iio_push_to_buffer(buffer, (u8 *)data->buffer, time_ns); 191 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-12Merge tag 'togreg-3.6a' of ↵Greg Kroah-Hartman5-7/+418
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next IIO: One new driver and a couple of nice cleanups.
2012-07-12Merge tag 'fixes-togreg-3.6a' of ↵Greg Kroah-Hartman2-21/+22
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-next Various minor IIO fixes for staging-next.
2012-07-12iio: double unlock on error pathDan Carpenter1-1/+2
We should be holding the mutex when we goto error_free_chans. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-12iio: dac: ad5064: fix section mismatch in ad5064_init() in linux-nextGerard Snitselaar1-1/+1
ad5064_init() calls ad5064_spi_unregister_driver() which is annotated __exit. Signed-off-by: Gerard Snitselaar <dev@snitselaar.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-12iio: ad5064: Move bus write callbacks to #if protected sectionsLars-Peter Clausen1-19/+19
Move the SPI and I2C specific write callbacks to the respective "#if IS_ENABLED(CONFIG_SPI_MASTER)" and "#if IS_ENABLED(CONFIG_I2C)" protected sections of the code. This fixes the following warning which occurs if CONFIG_I2C is not set: drivers/iio/dac/ad5064.c: In function ‘ad5064_i2c_write’: drivers/iio/dac/ad5064.c:132: error: implicit declaration of function ‘i2c_master_send’ And the follwing warning which occurs when CONFIG_SPI_MASTER is not set: drivers/iio/dac/ad5064.c:137: warning: ‘ad5064_spi_write’ defined but not used Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-12iio: add adjd_s311 I2C digital color sensor driverPeter Meerwald3-0/+377
sensor has 4 channels (10-bit each, R/G/B and clear), sensitivity and gain is controlled in the driver by ext_info integration_time and CHAN_INFO_HARDWAREGAIN driver supports triggered buffer and IIO_CHAN_INFO_RAW to get the sensor data v5: address comments by Jonathan Cameron * use macro for channel declaration * get timestamp right before measurement * cleanups v4: address comments by Lars-Peter Clausen * make sure trigger handler is exited with iio_trigger_notify_done() and IRQ_HANDLED * kfree()/kalloc() -> krealloc() v3: * fix warnings v2: address comments by Lars-Peter Clausen * buffer allocation now in update_scan_mode instead of in trigger handler * simplify trigger code (assume active_scan_mask is not empty, use for_each_set_bit, use iio_push_to_buffer) * reorder entry in Makefile and Kconfig * fix remove Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-10IIO channel type and modifiers for CCT and RGBC dataJon Brenner1-0/+5
Add iio channel type and modifiers for Correlated Color Temperature (CCT) and RGBC (red/green/blue/clear) data. Add CCT and RGBC descriptions to documentation. Changes: Revised/condensed RGBC descriptions. Merge and trivial fix done by Jonathan Cameron. Signed-off-by: Jon Brenner <jbrenner@taosinc.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-09Merge tag 'togreg_8_7_2012' of ↵Greg Kroah-Hartman1-27/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Mixed back of updates and trivial examples fixes. Nothing terribly interesting in this one. 8 July 2012
2012-07-09iio: Introduce iio_validate_scan_mask_onehotLars-Peter Clausen1-0/+16
Add a helper function for validating a scan mask for devices where exactly one channel must be selected during sampling. This is a common case among devices which have scan mask restrictions so it makes sense to provide this function in the core. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-09iio: Add callback to check whether a scan mask is validLars-Peter Clausen1-7/+20
This is useful for cases where the number of valid scan masks grows exponentially, but it is rather easy to check whether a mask is valid or not programmatically. An example of such a case is a device with multiple ADCs where each ADC has a upstream MUX, which allows to select from a number of physical channels. +-------+ +-------+ | | | | --- Channel 1 | ADC 1 |---| MUX 1 | --- ... | | | | --- Channel M +-------+ +-------+ . . . . . . . . . +-------+ +-------+ | | | | --- Channel M * N + 1 | ADC N |---| MUX N | --- ... | | | | --- Channel M * N + M +-------+ +-------+ The number of necessary scan masks for this case is (M+1)**N - 1, on the other hand it is easy to check whether subsets for each ADC of the scanmask have only one bit set. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-08iio: Fix inkern remove incorrect put of deviceJonathan Cameron1-1/+0
The device_get is after this point so on error we should not be removing it. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-08iio: Fix unitialized use of listSascha Hauer1-1/+2
The dev_attr list is initialized in __iio_add_event_config_attrs which is called only when indio_dev->channels is true. Nevertheless the list is used unconditionally later in iio_device_register_eventset which results in a NULL pointer exception. To fix this unconditionally initialize the list in iio_device_register_eventset. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-08iio: iio_buffer_register: Use correct channel when calculating masklengthLars-Peter Clausen1-1/+1
The channel set assigned to the iio device is not necessarily the same has the channel set passed to iio_buffer_register. So to avoid possible complications always work with the channel set pass to iio_buffer_register and ignore the channel set assigned to the iio device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-08iio:trigger: Register sysfs file staticallyLars-Peter Clausen1-25/+13
The name sysfs attribute is the same for all triggers, so there is no need to register them dynamically at runtime. Create a attribute group for it and set it up for the bus attribute group. This also avoids a possible race condition where the uevent for the device is sent before the name sysfs attribute has been added. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-07iio: fix spelling of detach in static funcPeter Meerwald1-2/+2
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30IIO: Add a modifier for x^2+y^2+z^2Jonathan Cameron1-0/+1
There will probably be a number of such modifiers eventually but this one is used in the adis16240 accelerometer driver. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30IIO: Add a modifier for sqrt(x^2+y^2)Jonathan Cameron1-0/+1
There will probably be a number of such modifiers eventually but this one is used in the adis16204 accelerometer driver. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30iio: Rename _st_ functions to loose the bit that meant the staging version.Jonathan Cameron1-18/+15
These were originally introduced when the plan was to have parallel IIO cores in and out of staging with a slow move between them. Now we have reached the point where the whole core has moved, they need clearing up! Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30iio:dac:ad5064: Add support for the ad5629r and ad5669rLars-Peter Clausen2-35/+173
The ad5629r and ad5669r are the I2C variants of the ad5628 and ad5668. Since the ad5064 driver currently only supports SPI based devices the major part of this patch focuses on adding support for I2C based devices. Adding support for the actual parts boils down to adding entries for them to the device id table. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30iio:adc: Add AD7265/AD7266 supportLars-Peter Clausen3-0/+547
This patch adds support for the Analog Devices AD7265 and AD7266 Analog-to-Digital converters. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-26iio:dac:ad5446: Add support for the AD5450/51/52/53Lars-Peter Clausen3-3/+17
This patch adds support for the Analog Devices AD5450/51/52/53 Digital-to-Analog converters. The AD5452 and AD5453 are software compatible to the existing AD5444 and AD5446. The AD5450 and AD5451 are similar but have a smaller resolution. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26iio:adc:at91: Relase mutex on error path in at91_adc_read_rawLars-Peter Clausen1-2/+4
This issue was reported by the mini_lock.cocci coccinelle semantic patch. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-25Merge 3.5-rc4 into staging-nextGreg Kroah-Hartman1-2/+1
This picks up the staging changes made in 3.5-rc4 so that everyone can sync up properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22iio:trigger: Use to_iio_trigger() instead of dev_get_drvdata()Lars-Peter Clausen1-2/+1
Use to_iio_trigger(dev) instead of dev_get_drvdata(dev). Both will return the trigger which belongs to the device, but the the first on is a bit more lightweight. Since this is the last location where we used dev_get_drvdata() for retrieving the trigger there is no need anymore to assign the the trigger to the devices drvdata, so we can remove that as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-20iio: add vcnl4000 combined ALS and proximity sensorPeter Meerwald3-0/+229
minimal driver, no IR current control and proximity/event handling yet v5: * checkpatch warnings * increase msleep() to 20 ms when waiting for data ready as measurement/conversion can take up to 100 ms, 1 ms is too short v4 (address comments by Jonathan Cameron) * remove SENSORS_ prefix in Kconfig * change from IIO_INTENSITY to IIO_LIGHT * move from staging v3 (address comments by Shubhrajyoti Datta) * cleanup Kconfig entry * call I2C read/write functions directly v2 (address comments by Lars-Peter Clausen and Jonathan Cameron) * unify code for reading PS and AL data into parameterized _measure() function * limit wait for data to become ready within 20 tries * drop IIO_LIGHT channel, add SCALE to IIO_INTENSITY * drop extra string arguments used for logging purpose only Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18iio:adc:at91: Use new triggered buffer setup helperLars-Peter Clausen2-49/+5
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18iio: Add helper function for initializing triggered buffersLars-Peter Clausen3-0/+118
Add a helper function for executing the common tasks which are usually involved in setting up a simple software ringbuffer. It will allocate the buffer, allocate the pollfunc and register the buffer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18iio: iio_buffer_register: Skip channels with negative scan indexLars-Peter Clausen1-0/+3
It is not always the case that all channels can be used in buffered mode. This patch allows channels, which can not be used in buffered mode, to set their scan index to a negative number, which will cause iio_buffer_register to ignore the channel. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15iio: buffer: Fix NULL pointer deref caused by empty scan maskLars-Peter Clausen1-0/+4
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This will happen if no channel has been selected and buffer is enabled. iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in this case. As a result iio_update_demux() will cause a NULL pointer deref, because it expects active_scan_mask to be non-NULL. Since it does not make much sense to start data capture if there is no data to capture this patch updates the code to fail gracefully in iio_scan_mask_match() instead of crashing the kernel. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15iio: dac: Convert ad5380 to devm_regmap_* APIsAxel Lin1-6/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14iio: drop wrong reference from KconfigJiri Kosina1-2/+1
The documentation lives in drivers/staging/iio/Documentation, but according to Jonathan it's obsolete and needs fixing. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13Merge branch 'staging-linus' into staging-nextGreg Kroah-Hartman1-7/+9
We need this for the pstore fixes that went into the staging-linus branch, so that things apply properly for the pstore/android code merge. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12iio: ad9523: Fix argument type mismatchMichael Hennerich1-1/+1
drivers/iio/frequency/ad9523.c:378 ad9523_vco_out_map() warn: value 2 can't fit into 1 'out' Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12iio: add mcp4725 I2C DAC driverPeter Meerwald3-0/+239
v5: * fix warnings (Jonathan Cameron) v4: * remove unused indio_dev pointer in mcp4725_data (Jonathan Cameron) * use u16 instead of unsigned short in mcp4725_data (Jonathan Cameron) * #include mcp4725.h from linux/iio/dac/ v3: * move from staging to drivers/iio * switch to chan_spec * dev_get_drvdata() -> dev_to_iio_dev() * annotate probe() and remove() with __devinit and __devexit v2 (based on comments from Jonathan Cameron and Lars-Peter Clausen): * did NOT switch to chan_spec yet * rebase to staging-next tree, update iio header locations * dropped dac.h #include, not needed * strict_strtol() -> kstrtol() * call iio_device_unregister() in remove() * everything in one patch Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12iio: frequency: adf4350: using an uninitialized variableDan Carpenter1-2/+2
GCC complains that we use an uninitialized variable if the user passes an invalid parameter to adf4350_read(). I decided that we should return -EINVAL instead in that case. However, when I looked up at adf4350_write() it returned -ENODEV for that condition. In the end, I decided the -EINVAL was the right thing and I change adf4350_write() to match. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12iio: frequency: adf4350: fix an initializationDan Carpenter1-1/+1
Sparse complains about this: drivers/iio/frequency/adf4350.c:58:29: warning: Initializer entry defined twice drivers/iio/frequency/adf4350.c:59:10: also defined here It looks like '|' was intended here instead of ','. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12iio: max517: mark probe() and remove() with __devinit and __devexitPeter Meerwald1-3/+3
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12iio: remove indio_dev pointer from max517_dataPeter Meerwald1-1/+0
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12iio: frequency: ad9523: unlock on error in ad9523_reg_access()Dan Carpenter1-1/+3
There was a return path which got missed accidentally. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-07iio: iio_enum_available_read: Prevent possible buffer overflowLars-Peter Clausen1-1/+1
Use scnprint instead of snprintf, because snprintf returns the number of bytes that would have been written to the buffer if there was enough space, and as a result writing to buf[len-1] might cause a access beyond the buffers limits. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-07iio: adf4350: fix compiler warning [-Wuninitialized]Michael Hennerich1-0/+2
drivers/iio/frequency/adf4350.c:316:32: warning: ‘val’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05staging:iio: Move DAC drivers out of stagingLars-Peter Clausen17-0/+5241
The IIO DAC drivers are in a reasonably good shape. They all make use of channel spec and non of them provides non-documented sysfs attributes. Code style should be OK as well, both checkpatch and coccicheck only report trivial issues. So lets move the whole folder out of staging. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05iio: Add helper functions for enum style channel attributesLars-Peter Clausen1-0/+63
We often have the case were we do have a enum style channel attribute. These attributes have in common that they are a list of string values which usually map in a 1-to-1 fashion to integer values. This patch implements some common helper code for implementing enum style channel attributes using extended channel attributes. The helper functions take care of converting between the string and integer values, as well providing a function for "_available" attributes which list all available enum items. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04iio:inkern: Use iio_device_{get,put}Lars-Peter Clausen1-7/+6
Use iio_device_get and iio_device_put instead of open-coding it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband ↵Michael Hennerich3-0/+497
Synthesizers Changes since V1: Apply Jonathan's review feedback: Introduce and use IIO_ALTVOLTAGE. Fix up comments and documentation. Remove dead code. Reorder some code fragments. Add missing iio_device_free. Convert to new API. Fix-up out of staging includes. Removed pll_locked attribute. Changes since V2: Use module_spi_driver. adf4350_remove: move gpio_free after regulator. target patch to drivers/iio Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 10:04:24 +0000