diff options
Diffstat (limited to 'drivers')
147 files changed, 15425 insertions, 1203 deletions
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c index d74a7c5e75d..4b6bf19c39c 100644 --- a/drivers/atm/ambassador.c +++ b/drivers/atm/ambassador.c @@ -795,7 +795,7 @@ static void drain_rx_pools (amb_dev * dev) { } static inline void fill_rx_pool (amb_dev * dev, unsigned char pool, - unsigned int __nocast priority) + gfp_t priority) { rx_in rx; amb_rxq * rxq; diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 58219744f5d..7f7ec288824 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1374,8 +1374,7 @@ static void reset_chip (struct fs_dev *dev) } } -static void __devinit *aligned_kmalloc (int size, unsigned int __nocast flags, - int alignment) +static void __devinit *aligned_kmalloc (int size, gfp_t flags, int alignment) { void *t; @@ -1466,7 +1465,7 @@ static inline int nr_buffers_in_freepool (struct fs_dev *dev, struct freepool *f working again after that... -- REW */ static void top_off_fp (struct fs_dev *dev, struct freepool *fp, - unsigned int __nocast gfp_flags) + gfp_t gfp_flags) { struct FS_BPENTRY *qe, *ne; struct sk_buff *skb; diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 2bf723a7b6e..14f6a6201da 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -178,14 +178,12 @@ fore200e_irq_itoa(int irq) static void* -fore200e_kmalloc(int size, int flags) +fore200e_kmalloc(int size, gfp_t flags) { - void* chunk = kmalloc(size, flags); + void *chunk = kzalloc(size, flags); - if (chunk) - memset(chunk, 0x00, size); - else - printk(FORE200E "kmalloc() failed, requested size = %d, flags = 0x%x\n", size, flags); + if (!chunk) + printk(FORE200E "kmalloc() failed, requested size = %d, flags = 0x%x\n", size, flags); return chunk; } diff --git a/drivers/base/dmapool.c b/drivers/base/dmapool.c index 60a7ef6a201..e2f64f91ed0 100644 --- a/drivers/base/dmapool.c +++ b/drivers/base/dmapool.c @@ -156,7 +156,7 @@ dma_pool_create (const char *name, struct device *dev, static struct dma_page * -pool_alloc_page (struct dma_pool *pool, unsigned int __nocast mem_flags) +pool_alloc_page (struct dma_pool *pool, gfp_t mem_flags) { struct dma_page *page; int mapsize; @@ -262,8 +262,7 @@ dma_pool_destroy (struct dma_pool *pool) * If such a memory block can't be allocated, null is returned. */ void * -dma_pool_alloc (struct dma_pool *pool, unsigned int __nocast mem_flags, - dma_addr_t *handle) +dma_pool_alloc (struct dma_pool *pool, gfp_t mem_flags, dma_addr_t *handle) { unsigned long flags; struct dma_page *page; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 7e22a58926b..a280e679b1c 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -229,7 +229,7 @@ static int pkt_grow_pktlist(struct pktcdvd_device *pd, int nr_packets) return 1; } -static void *pkt_rb_alloc(unsigned int __nocast gfp_mask, void *data) +static void *pkt_rb_alloc(gfp_t gfp_mask, void *data) { return kmalloc(sizeof(struct pkt_rb_node), gfp_mask); } @@ -2082,7 +2082,7 @@ static int pkt_close(struct inode *inode, struct file *file) } -static void *psd_pool_alloc(unsigned int __nocast gfp_mask, void *data) +static void *psd_pool_alloc(gfp_t gfp_mask, void *data) { return kmalloc(sizeof(struct packet_stacked_data), gfp_mask); } diff --git a/drivers/block/scsi_ioctl.c b/drivers/block/scsi_ioctl.c index 079ec344eb4..382dea7b224 100644 --- a/drivers/block/scsi_ioctl.c +++ b/drivers/block/scsi_ioctl.c @@ -201,15 +201,15 @@ static int verify_command(struct file *file, unsigned char *cmd) return 0; } + /* And root can do any command.. */ + if (capable(CAP_SYS_RAWIO)) + return 0; + if (!type) { cmd_type[cmd[0]] = CMD_WARNED; printk(KERN_WARNING "scsi: unknown opcode 0x%02x\n", cmd[0]); } - /* And root can do any command.. */ - if (capable(CAP_SYS_RAWIO)) - return 0; - /* Otherwise fail it with an "Operation not permitted" */ return -EPERM; } diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index a1bf8f066c8..4fa85234d8b 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -308,7 +308,7 @@ unlock: } static inline struct urb *bpa10x_alloc_urb(struct usb_device *udev, unsigned int pipe, - size_t size, unsigned int __nocast flags, void *data) + size_t size, gfp_t flags, void *data) { struct urb *urb; struct usb_ctrlrequest *cr; diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 57c48bbf6fe..6756cb20b75 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -132,7 +132,7 @@ static struct usb_device_id blacklist_ids[] = { { } /* Terminating entry */ }; -static struct _urb *_urb_alloc(int isoc, unsigned int __nocast gfp) +static struct _urb *_urb_alloc(int isoc, gfp_t gfp) { struct _urb *_urb = kmalloc(sizeof(struct _urb) + sizeof(struct usb_iso_packet_descriptor) * isoc, gfp); diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 6ba48f346fc..041bb47b5c3 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -376,7 +376,7 @@ static int __init drm_core_init(void) goto err_p2; } - drm_proc_root = create_proc_entry("dri", S_IFDIR, NULL); + drm_proc_root = proc_mkdir("dri", NULL); if (!drm_proc_root) { DRM_ERROR("Cannot create /proc/dri\n"); ret = -1; diff --git a/drivers/char/drm/drm_proc.c b/drivers/char/drm/drm_proc.c index 32d2bb99462..97796100248 100644 --- a/drivers/char/drm/drm_proc.c +++ b/drivers/char/drm/drm_proc.c @@ -95,7 +95,7 @@ int drm_proc_init(drm_device_t *dev, int minor, char name[64]; sprintf(name, "%d", minor); - *dev_root = create_proc_entry(name, S_IFDIR, root); + *dev_root = proc_mkdir(name, root); if (!*dev_root) { DRM_ERROR("Cannot create /proc/dri/%s\n", name); return -1; diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c index 95a976c96eb..70458cb061c 100644 --- a/drivers/char/drm/drm_stub.c +++ b/drivers/char/drm/drm_stub.c @@ -47,7 +47,7 @@ MODULE_PARM_DESC(cards_limit, "Maximum number of graphics cards"); MODULE_PARM_DESC(debug, "Enable debug output"); module_param_named(cards_limit, drm_cards_limit, int, 0444); -module_param_named(debug, drm_debug, int, 0666); +module_param_named(debug, drm_debug, int, 0600); drm_head_t **drm_heads; struct drm_sysfs_class *drm_class; diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 2291a87e8ad..97d6dc24b80 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -229,8 +229,8 @@ static int __init r3964_init(void) TRACE_L("line discipline %d registered", N_R3964); TRACE_L("flags=%x num=%x", tty_ldisc_N_R3964.flags, tty_ldisc_N_R3964.num); - TRACE_L("open=%x", (int)tty_ldisc_N_R3964.open); - TRACE_L("tty_ldisc_N_R3964 = %x", (int)&tty_ldisc_N_R3964); + TRACE_L("open=%p", tty_ldisc_N_R3964.open); + TRACE_L("tty_ldisc_N_R3964 = %p", &tty_ldisc_N_R3964); } else { @@ -267,8 +267,8 @@ static void add_tx_queue(struct r3964_info *pInfo, struct r3964_block_header *pH spin_unlock_irqrestore(&pInfo->lock, flags); - TRACE_Q("add_tx_queue %x, length %d, tx_first = %x", - (int)pHeader, pHeader->length, (int)pInfo->tx_first ); + TRACE_Q("add_tx_queue %p, length %d, tx_first = %p", + pHeader, pHeader->length, pInfo->tx_first ); } static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code) @@ -285,10 +285,10 @@ static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code) return; #ifdef DEBUG_QUEUE - printk("r3964: remove_from_tx_queue: %x, length %d - ", - (int)pHeader, (int)pHeader->length ); + printk("r3964: remove_from_tx_queue: %p, length %u - ", + pHeader, pHeader->length ); for(pDump=pHeader;pDump;pDump=pDump->next) - printk("%x ", (int)pDump); + printk("%p ", pDump); printk("\n"); #endif @@ -319,10 +319,10 @@ static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code) spin_unlock_irqrestore(&pInfo->lock, flags); kfree(pHeader); - TRACE_M("remove_from_tx_queue - kfree %x",(int)pHeader); + TRACE_M("remove_from_tx_queue - kfree %p",pHeader); - TRACE_Q("remove_from_tx_queue: tx_first = %x, tx_last = %x", - (int)pInfo->tx_first, (int)pInfo->tx_last ); + TRACE_Q("remove_from_tx_queue: tx_first = %p, tx_last = %p", + pInfo->tx_first, pInfo->tx_last ); } static void add_rx_queue(struct r3964_info *pInfo, struct r3964_block_header *pHeader) @@ -346,9 +346,9 @@ static void add_rx_queue(struct r3964_info *pInfo, struct r3964_block_header *pH spin_unlock_irqrestore(&pInfo->lock, flags); - TRACE_Q("add_rx_queue: %x, length = %d, rx_first = %x, count = %d", - (int)pHeader, pHeader->length, - (int)pInfo->rx_first, pInfo->blocks_in_rx_queue); + TRACE_Q("add_rx_queue: %p, length = %d, rx_first = %p, count = %d", + pHeader, pHeader->length, + pInfo->rx_first, pInfo->blocks_in_rx_queue); } static void remove_from_rx_queue(struct r3964_info *pInfo, @@ -360,10 +360,10 @@ static void remove_from_rx_queue(struct r3964_info *pInfo, if(pHeader==NULL) return; - TRACE_Q("remove_from_rx_queue: rx_first = %x, rx_last = %x, count = %d", - (int)pInfo->rx_first, (int)pInfo->rx_last, pInfo->blocks_in_rx_queue ); - TRACE_Q("remove_from_rx_queue: %x, length %d", - (int)pHeader, (int)pHeader->length ); + TRACE_Q("remove_from_rx_queue: rx_first = %p, rx_last = %p, count = %d", + pInfo->rx_first, pInfo->rx_last, pInfo->blocks_in_rx_queue ); + TRACE_Q("remove_from_rx_queue: %p, length %u", + pHeader, pHeader->length ); spin_lock_irqsave(&pInfo->lock, flags); @@ -401,10 +401,10 @@ static void remove_from_rx_queue(struct r3964_info *pInfo, spin_unlock_irqrestore(&pInfo->lock, flags); kfree(pHeader); - TRACE_M("remove_from_rx_queue - kfree %x",(int)pHeader); + TRACE_M("remove_from_rx_queue - kfree %p",pHeader); - TRACE_Q("remove_from_rx_queue: rx_first = %x, rx_last = %x, count = %d", - (int)pInfo->rx_first, (int)pInfo->rx_last, pInfo->blocks_in_rx_queue ); + TRACE_Q("remove_from_rx_queue: rx_first = %p, rx_last = %p, count = %d", + pInfo->rx_first, pInfo->rx_last, pInfo->blocks_in_rx_queue ); } static void put_char(struct r3964_info *pInfo, unsigned char ch) @@ -506,8 +506,8 @@ static void transmit_block(struct r3964_info *pInfo) if(tty->driver->write_room) room=tty->driver->write_room(tty); - TRACE_PS("transmit_block %x, room %d, length %d", - (int)pBlock, room, pBlock->length); + TRACE_PS("transmit_block %p, room %d, length %d", + pBlock, room, pBlock->length); while(pInfo->tx_position < pBlock->length) { @@ -588,7 +588,7 @@ static void on_receive_block(struct r3964_info *pInfo) /* prepare struct r3964_block_header: */ pBlock = kmalloc(length+sizeof(struct r3964_block_header), GFP_KERNEL); - TRACE_M("on_receive_block - kmalloc %x",(int)pBlock); + TRACE_M("on_receive_block - kmalloc %p",pBlock); if(pBlock==NULL) return; @@ -868,11 +868,11 @@ static int enable_signals(struct r3964_info *pInfo, pid_t pid, int arg) if(pMsg) { kfree(pMsg); - TRACE_M("enable_signals - msg kfree %x",(int)pMsg); + TRACE_M("enable_signals - msg kfree %p",pMsg); } } kfree(pClient); - TRACE_M("enable_signals - kfree %x",(int)pClient); + TRACE_M("enable_signals - kfree %p",pClient); return 0; } } @@ -890,7 +890,7 @@ static int enable_signals(struct r3964_info *pInfo, pid_t pid, int arg) { /* add client to client list */ pClient=kmalloc(sizeof(struct r3964_client_info), GFP_KERNEL); - TRACE_M("enable_signals - kmalloc %x",(int)pClient); + TRACE_M("enable_signals - kmalloc %p",pClient); if(pClient==NULL) return -ENOMEM; @@ -954,7 +954,7 @@ static void add_msg(struct r3964_client_info *pClient, int msg_id, int arg, queue_the_message: pMsg = kmalloc(sizeof(struct r3964_message), GFP_KERNEL); - TRACE_M("add_msg - kmalloc %x",(int)pMsg); + TRACE_M("add_msg - kmalloc %p",pMsg); if(pMsg==NULL) { return; } @@ -1067,11 +1067,11 @@ static int r3964_open(struct tty_struct *tty) struct r3964_info *pInfo; TRACE_L("open"); - TRACE_L("tty=%x, PID=%d, disc_data=%x", - (int)tty, current->pid, (int)tty->disc_data); + TRACE_L("tty=%p, PID=%d, disc_data=%p", + tty, current->pid, tty->disc_data); pInfo=kmalloc(sizeof(struct r3964_info), GFP_KERNEL); - TRACE_M("r3964_open - info kmalloc %x",(int)pInfo); + TRACE_M("r3964_open - info kmalloc %p",pInfo); if(!pInfo) { @@ -1080,26 +1080,26 @@ static int r3964_open(struct tty_struct *tty) } pInfo->rx_buf = kmalloc(RX_BUF_SIZE, GFP_KERNEL); - TRACE_M("r3964_open - rx_buf kmalloc %x",(int)pInfo->rx_buf); + TRACE_M("r3964_open - rx_buf kmalloc %p",pInfo->rx_buf); if(!pInfo->rx_buf) { printk(KERN_ERR "r3964: failed to alloc receive buffer\n"); kfree(pInfo); - TRACE_M("r3964_open - info kfree %x",(int)pInfo); + TRACE_M("r3964_open - info kfree %p",pInfo); return -ENOMEM; } pInfo->tx_buf = kmalloc(TX_BUF_SIZE, GFP_KERNEL); - TRACE_M("r3964_open - tx_buf kmalloc %x",(int)pInfo->tx_buf); + TRACE_M("r3964_open - tx_buf kmalloc %p",pInfo->tx_buf); if(!pInfo->tx_buf) { printk(KERN_ERR "r3964: failed to alloc transmit buffer\n"); kfree(pInfo->rx_buf); - TRACE_M("r3964_open - rx_buf kfree %x",(int)pInfo->rx_buf); + TRACE_M("r3964_open - rx_buf kfree %p",pInfo->rx_buf); kfree(pInfo); - TRACE_M("r3964_open - info kfree %x",(int)pInfo); + TRACE_M("r3964_open - info kfree %p",pInfo); return -ENOMEM; } @@ -1154,11 +1154,11 @@ static void r3964_close(struct tty_struct *tty) if(pMsg) { kfree(pMsg); - TRACE_M("r3964_close - msg kfree %x",(int)pMsg); + TRACE_M("r3964_close - msg kfree %p",pMsg); } } kfree(pClient); - TRACE_M("r3964_close - client kfree %x",(int)pClient); + TRACE_M("r3964_close - client kfree %p",pClient); pClient=pNext; } /* Remove jobs from tx_queue: */ @@ -1177,11 +1177,11 @@ static void r3964_close(struct tty_struct *tty) /* Free buffers: */ wake_up_interruptible(&pInfo->read_wait); kfree(pInfo->rx_buf); - TRACE_M("r3964_close - rx_buf kfree %x",(int)pInfo->rx_buf); + TRACE_M("r3964_close - rx_buf kfree %p",pInfo->rx_buf); kfree(pInfo->tx_buf); - TRACE_M("r3964_close - tx_buf kfree %x",(int)pInfo->tx_buf); + TRACE_M("r3964_close - tx_buf kfree %p",pInfo->tx_buf); kfree(pInfo); - TRACE_M("r3964_close - info kfree %x",(int)pInfo); + TRACE_M("r3964_close - info kfree %p",pInfo); } static ssize_t r3964_read(struct tty_struct *tty, struct file *file, @@ -1234,7 +1234,7 @@ repeat: count = sizeof(struct r3964_client_message); kfree(pMsg); - TRACE_M("r3964_read - msg kfree %x",(int)pMsg); + TRACE_M("r3964_read - msg kfree %p",pMsg); if (copy_to_user(buf,&theMsg, count)) return -EFAULT; @@ -1279,7 +1279,7 @@ static ssize_t r3964_write(struct tty_struct * tty, struct file * file, * Allocate a buffer for the data and copy it from the buffer with header prepended */ new_data = kmalloc (count+sizeof(struct r3964_block_header), GFP_KERNEL); - TRACE_M("r3964_write - kmalloc %x",(int)new_data); + TRACE_M("r3964_write - kmalloc %p",new_data); if (new_data == NULL) { if (pInfo->flags & R3964_DEBUG) { diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c index ed867db550a..e1a90d9a875 100644 --- a/drivers/char/s3c2410-rtc.c +++ b/drivers/char/s3c2410-rtc.c @@ -564,6 +564,7 @@ static int s3c2410_rtc_resume(struct device *dev, u32 level) static struct device_driver s3c2410_rtcdrv = { .name = "s3c2410-rtc", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2410_rtc_probe, .remove = s3c2410_rtc_remove, diff --git a/drivers/char/watchdog/mv64x60_wdt.c b/drivers/char/watchdog/mv64x60_wdt.c index 1436aea3b28..6d3ff0836c4 100644 --- a/drivers/char/watchdog/mv64x60_wdt.c +++ b/drivers/char/watchdog/mv64x60_wdt.c @@ -87,6 +87,8 @@ static int mv64x60_wdt_open(struct inode *inode, struct file *file) mv64x60_wdt_service(); mv64x60_wdt_handler_enable(); + nonseekable_open(inode, file); + return 0; } @@ -103,12 +105,9 @@ static int mv64x60_wdt_release(struct inode *inode, struct file *file) return 0; } -static ssize_t mv64x60_wdt_write(struct file *file, const char *data, +static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, size_t len, loff_t * ppos) { - if (*ppos != file->f_pos) - return -ESPIPE; - if (len) mv64x60_wdt_service(); @@ -119,6 +118,7 @@ static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { int timeout; + void __user *argp = (void __user *)arg; static struct watchdog_info info = { .options = WDIOF_KEEPALIVEPING, .firmware_version = 0, @@ -127,13 +127,13 @@ static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user((void *)arg, &info, sizeof(info))) + if (copy_to_user(argp, &info, sizeof(info))) return -EFAULT; break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - if (put_user(wdt_status, (int *)arg)) + if (put_user(wdt_status, (int __user *)argp)) return -EFAULT; wdt_status &= ~WDIOF_KEEPALIVEPING; break; @@ -154,7 +154,7 @@ static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file, case WDIOC_GETTIMEOUT: timeout = mv64x60_wdt_timeout * HZ; - if (put_user(timeout, (int *)arg)) + if (put_user(timeout, (int __user *)argp)) return -EFAULT; break; diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index 5a80adbf803..0b8e493be04 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -50,8 +50,8 @@ #include <asm/io.h> /* For inb/outb/... */ /* Module and version information */ -#define WATCHDOG_VERSION "1.01" -#define WATCHDOG_DATE "02 Sep 2005" +#define WATCHDOG_VERSION "1.02" +#define WATCHDOG_DATE "03 Sep 2005" #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog" #define WATCHDOG_NAME "pcwd_pci" #define PFX WATCHDOG_NAME ": " @@ -70,19 +70,30 @@ * These are the defines that describe the control status bits for the * PCI-PC Watchdog card. */ -#define WD_PCI_WTRP 0x01 /* Watchdog Trip status */ -#define WD_PCI_HRBT 0x02 /* Watchdog Heartbeat */ -#define WD_PCI_TTRP 0x04 /* Temperature Trip status */ +/* Port 1 : Control Status #1 */ +#define WD_PCI_WTRP 0x01 /* Watchdog Trip status */ +#define WD_PCI_HRBT 0x02 /* Watchdog Heartbeat */ +#define WD_PCI_TTRP 0x04 /* Temperature Trip status */ +#define WD_PCI_RL2A 0x08 /* Relay 2 Active */ +#define WD_PCI_RL1A 0x10 /* Relay 1 Active */ +#define WD_PCI_R2DS 0x40 /* Relay 2 Disable Temperature-trip/reset */ +#define WD_PCI_RLY2 0x80 /* Activate Relay 2 on the board */ +/* Port 2 : Control Status #2 */ +#define WD_PCI_WDIS 0x10 /* Watchdog Disable */ +#define WD_PCI_ENTP 0x20 /* Enable Temperature Trip Reset */ +#define WD_PCI_WRSP 0x40 /* Watchdog wrote response */ +#define WD_PCI_PCMD 0x80 /* PC has sent command */ /* according to documentation max. time to process a command for the pci * watchdog card is 100 ms, so we give it 150 ms to do it's job */ #define PCI_COMMAND_TIMEOUT 150 /* Watchdog's internal commands */ -#define CMD_GET_STATUS 0x04 -#define CMD_GET_FIRMWARE_VERSION 0x08 -#define CMD_READ_WATCHDOG_TIMEOUT 0x18 -#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 +#define CMD_GET_STATUS 0x04 +#define CMD_GET_FIRMWARE_VERSION 0x08 +#define CMD_READ_WATCHDOG_TIMEOUT 0x18 +#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 +#define CMD_GET_CLEAR_RESET_COUNT 0x84 /* We can only use 1 card due to the /dev/watchdog restriction */ static int cards_found; @@ -91,15 +102,22 @@ static int cards_found; static int temp_panic; static unsigned long is_active; static char expect_release; -static struct { - int supports_temp; /* Wether or not the card has a temperature device */ - int boot_status; /* The card's boot status */ - unsigned long io_addr; /* The cards I/O address */ - spinlock_t io_lock; - struct pci_dev *pdev; +static struct { /* this is private data for each PCI-PC watchdog card */ + int supports_temp; /* Wether or not the card has a temperature device */ + int boot_status; /* The card's boot status */ + unsigned long io_addr; /* The cards I/O address */ + spinlock_t io_lock; /* the lock for io operations */ + struct pci_dev *pdev; /* the PCI-device */ } pcipcwd_private; /* module parameters */ +#define QUIET 0 /* Default */ +#define VERBOSE 1 /* Verbose */ +#define DEBUG 2 /* print fancy stuff too */ +static int debug = QUIET; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); + #define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); @@ -117,6 +135,10 @@ static int send_command(int cmd, int *msb, int *lsb) { int got_response, count; + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); + spin_lock(&pcipcwd_private.io_lock); /* If a command requires data it should be written first. * Data for commands with 8 bits of data should be written to port 4. @@ -131,10 +153,19 @@ static int send_command(int cmd, int *msb, int *lsb) /* wait till the pci card processed the command, signaled by * the WRSP bit in port 2 and give it a max. timeout of * PCI_COMMAND_TIMEOUT to process */ - got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40; + got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP; for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response); count++) { mdelay(1); - got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40; + got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP; + } + + if (debug >= DEBUG) { + if (got_response) { + printk(KERN_DEBUG PFX "time to process command was: %d ms\n", + count); + } else { + printk(KERN_DEBUG PFX "card did not respond on command!\n"); + } } if (got_response) { @@ -144,12 +175,66 @@ static int send_command(int cmd, int *msb, int *lsb) /* clear WRSP bit */ inb_p(pcipcwd_private.io_addr + 6); + + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); } + spin_unlock(&pcipcwd_private.io_lock); return got_response; } +static inline void pcipcwd_check_temperature_support(void) +{ + if (inb_p(pcipcwd_private.io_addr) != 0xF0) + pcipcwd_private.supports_temp = 1; +} + +static int pcipcwd_get_option_switches(void) +{ + int option_switches; + + option_switches = inb_p(pcipcwd_private.io_addr + 3); + return option_switches; +} + +static void pcipcwd_show_card_info(void) +{ + int got_fw_rev, fw_rev_major, fw_rev_minor; + char fw_ver_str[20]; /* The cards firmware version */ + int option_switches; + + got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); + if (got_fw_rev) { + sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); + } else { + sprintf(fw_ver_str, "<card no answer>"); + } + + /* Get switch settings */ + option_switches = pcipcwd_get_option_switches(); + + printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n", + (int) pcipcwd_private.io_addr, fw_ver_str, + (pcipcwd_private.supports_temp ? "with" : "without")); + + printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", + option_switches, + ((option_switches & 0x10) ? "ON" : "OFF"), + ((option_switches & 0x08) ? "ON" : "OFF")); + + if (pcipcwd_private.boot_status & WDIOF_CARDRESET) + printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n"); + + if (pcipcwd_private.boot_status & WDIOF_OVERHEAT) + printk(KERN_INFO PFX "Card sensed a CPU Overheat\n"); + + if (pcipcwd_private.boot_status == 0) + printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n"); +} + static int pcipcwd_start(void) { int stat_reg; @@ -161,11 +246,14 @@ static int pcipcwd_start(void) stat_reg = inb_p(pcipcwd_private.io_addr + 2); spin_unlock(&pcipcwd_private.io_lock); - if (stat_reg & 0x10) { + if (stat_reg & WD_PCI_WDIS) { printk(KERN_ERR PFX "Card timer not enabled\n"); return -1; } + if (debug >= VERBOSE) + printk(KERN_DEBUG PFX "Watchdog started\n"); + return 0; } @@ -183,18 +271,25 @@ static int pcipcwd_stop(void) stat_reg = inb_p(pcipcwd_private.io_addr + 2); spin_unlock(&pcipcwd_private.io_lock); - if (!(stat_reg & 0x10)) { + if (!(stat_reg & WD_PCI_WDIS)) { printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n"); return -1; } + if (debug >= VERBOSE) + printk(KERN_DEBUG PFX "Watchdog stopped\n"); + return 0; } static int pcipcwd_keepalive(void) { /* Re-trigger watchdog by writing to port 0 */ - outb_p(0x42, pcipcwd_private.io_addr); + outb_p(0x42, pcipcwd_private.io_addr); /* send out any data */ + + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n"); + return 0; } @@ -210,29 +305,64 @@ static int pcipcwd_set_heartbeat(int t) send_command(CMD_WRITE_WATCHDOG_TIMEOUT, &t_msb, &t_lsb); heartbeat = t; + if (debug >= VERBOSE) + printk(KERN_DEBUG PFX "New heartbeat: %d\n", + heartbeat); + return 0; } static int pcipcwd_get_status(int *status) { - int new_status; + int control_status; *status=0; - new_status = inb_p(pcipcwd_private.io_addr + 1); - if (new_status & WD_PCI_WTRP) + control_status = inb_p(pcipcwd_private.io_addr + 1); + if (control_status & WD_PCI_WTRP) *status |= WDIOF_CARDRESET; - if (new_status & WD_PCI_TTRP) { + if (control_status & WD_PCI_TTRP) { *status |= WDIOF_OVERHEAT; if (temp_panic) panic(PFX "Temperature overheat trip!\n"); } + if (debug >= DEBUG) + printk(KERN_DEBUG PFX "Control Status #1: 0x%02x\n", + control_status); + return 0; } static int pcipcwd_clear_status(void) { - outb_p(0x01, pcipcwd_private.io_addr + 1); + int control_status; + int msb; + int reset_counter; + + if (debug >= VERBOSE) + printk(KERN_INFO PFX "clearing watchdog trip status & LED\n"); + + control_status = inb_p(pcipcwd_private.io_addr + 1); + + if (debug >= DEBUG) { + printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status); + printk(KERN_DEBUG PFX "sending: 0x%02x\n", + (control_status & WD_PCI_R2DS) | WD_PCI_WTRP); + } + + /* clear trip status & LED and keep mode of relay 2 */ + outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1); + + /* clear reset counter */ + msb=0; + reset_counter=0xff; + send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter); + + if (debug >= DEBUG) { + printk(KERN_DEBUG PFX "reset count was: 0x%02x\n", + reset_counter); + } + return 0; } @@ -242,11 +372,18 @@ static int pcipcwd_get_temperature(int *temperature) if (!pcipcwd_private.supports_temp) return -ENODEV; + *temperature = inb_p(pcipcwd_private.io_addr); + /* * Convert celsius to fahrenheit, since this was * the decided 'standard' for this return value. */ - *temperature = ((inb_p(pcipcwd_private.io_addr)) * 9 / 5) + 32; + *temperature = (*temperature * 9 / 5) + 32; + + if (debug >= DEBUG) { + printk(KERN_DEBUG PFX "temperature is: %d F\n", + *temperature); + } return 0; } @@ -256,7 +393,7 @@ static int pcipcwd_get_temperature(int *temperature) */ static ssize_t pcipcwd_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) + size_t len, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ if (len) { @@ -381,8 +518,11 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file, static int pcipcwd_open(struct inode *inode, struct file *file) { /* /dev/watchdog can only be opened once */ - if (test_and_set_bit(0, &is_active)) + if (test_and_set_bit(0, &is_active)) { + if (debug >= VERBOSE) + printk(KERN_ERR PFX "Attempt to open already opened device.\n"); return -EBUSY; + } /* Activate */ pcipcwd_start(); @@ -492,19 +632,10 @@ static struct notifier_block pcipcwd_notifier = { * Init & exit routines */ -static inline void check_temperature_support(void) -{ - if (inb_p(pcipcwd_private.io_addr) != 0xF0) - pcipcwd_private.supports_temp = 1; -} - static int __devinit pcipcwd_card_init(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret = -EIO; - int got_fw_rev, fw_rev_major, fw_rev_minor; - char fw_ver_str[20]; - char option_switches; cards_found++; if (cards_found == 1) @@ -546,36 +677,10 @@ static int __devinit pcipcwd_card_init(struct pci_dev *pdev, pcipcwd_stop(); /* Check whether or not the card supports the temperature device */ - check_temperature_support(); - - /* Get the Firmware Version */ - got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); - if (got_fw_rev) { - sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); - } else { - sprintf(fw_ver_str, "<card no answer>"); - } + pcipcwd_check_temperature_support(); - /* Get switch settings */ - option_switches = inb_p(pcipcwd_private.io_addr + 3); - - printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n", - (int) pcipcwd_private.io_addr, fw_ver_str, - (pcipcwd_private.supports_temp ? "with" : "without")); - - printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", - option_switches, - ((option_switches & 0x10) ? "ON" : "OFF"), - ((option_switches & 0x08) ? "ON" : "OFF")); - - if (pcipcwd_private.boot_status & WDIOF_CARDRESET) - printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n"); - - if (pcipcwd_private.boot_status & WDIOF_OVERHEAT) - printk(KERN_INFO PFX "Card sensed a CPU Overheat\n"); - - if (pcipcwd_private.boot_status == 0) - printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n"); + /* Show info about the card itself */ + pcipcwd_show_card_info(); /* Check that the heartbeat value is within it's range ; if not reset to the default */ if (pcipcwd_set_heartbeat(heartbeat)) { @@ -656,7 +761,7 @@ static struct pci_driver pcipcwd_driver = { static int __init pcipcwd_init_module(void) { - spin_lock_init (&pcipcwd_private.io_lock); + spin_lock_init(&pcipcwd_private.io_lock); return pci_register_driver(&pcipcwd_driver); } diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index bb0b3a8de14..505677fb315 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -69,7 +69,7 @@ int cn_already_initialized = 0; * a new message. * */ -int cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask) +int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask) { struct cn_callback_entry *__cbq; unsigned int size; diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c index b6678239825..4f4ba9b6d18 100644 --- a/drivers/firmware/dell_rbu.c +++ b/drivers/firmware/dell_rbu.c @@ -50,7 +50,7 @@ MODULE_AUTHOR("Abhay Salunke <abhay_salunke@dell.com>"); MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems"); MODULE_LICENSE("GPL"); -MODULE_VERSION("2.0"); +MODULE_VERSION("3.0"); #define BIOS_SCAN_LIMIT 0xffffffff #define MAX_IMAGE_LENGTH 16 @@ -62,15 +62,16 @@ static struct _rbu_data { int dma_alloc; spinlock_t lock; unsigned long packet_read_count; - unsigned long packet_write_count; unsigned long num_packets; unsigned long packetsize; + unsigned long imagesize; int entry_created; } rbu_data; static char image_type[MAX_IMAGE_LENGTH + 1] = "mono"; module_param_string(image_type, image_type, sizeof (image_type), 0); -MODULE_PARM_DESC(image_type, "BIOS image type. choose- mono or packet"); +MODULE_PARM_DESC(image_type, + "BIOS image type. choose- mono or packet or init"); struct packet_data { struct list_head list; @@ -88,55 +89,13 @@ static dma_addr_t dell_rbu_dmaaddr; static void init_packet_head(void) { INIT_LIST_HEAD(&packet_data_head.list); - rbu_data.packet_write_count = 0; rbu_data.packet_read_count = 0; rbu_data.num_packets = 0; rbu_data.packetsize = 0; + rbu_data.imagesize = 0; } -static int fill_last_packet(void *data, size_t length) -{ - struct list_head *ptemp_list; - struct packet_data *packet = NULL; - int packet_count = 0; - - pr_debug("fill_last_packet: entry \n"); - - if (!rbu_data.num_packets) { - pr_debug("fill_last_packet: num_packets=0\n"); - return -ENOMEM; - } - - packet_count = rbu_data.num_packets; - - ptemp_list = (&packet_data_head.list)->prev; - - packet = list_entry(ptemp_list, struct packet_data, list); - - if ((rbu_data.packet_write_count + length) > rbu_data.packetsize) { - pr_debug("dell_rbu:%s: packet size data " - "overrun\n", __FUNCTION__); - return -EINVAL; - } - - pr_debug("fill_last_packet : buffer = %p\n", packet->data); - - memcpy((packet->data + rbu_data.packet_write_count), data, length); - - if ((rbu_data.packet_write_count + length) == rbu_data.packetsize) { - /* - * this was the last data chunk in the packet - * so reinitialize the packet data counter to zero - */ - rbu_data.packet_write_count = 0; - } else - rbu_data.packet_write_count += length; - - pr_debug("fill_last_packet: exit \n"); - return 0; -} - -static int create_packet(size_t length) +static int create_packet(void *data, size_t length) { struct packet_data *newpacket; int ordernum = 0; @@ -186,9 +145,11 @@ static int create_packet(size_t length) INIT_LIST_HEAD(&newpacket->list); list_add_tail(&newpacket->list, &packet_data_head.list); /* - * packets have fixed size + * packets may not have fixed size */ - newpacket->length = rbu_data.packetsize; + newpacket->length = length; + + memcpy(newpacket->data, data, length); pr_debug("create_packet: exit \n"); @@ -198,13 +159,37 @@ static int create_packet(size_t length) static int packetize_data(void *data, size_t length) { int rc = 0; + int done = 0; + int packet_length; + u8 *temp; + u8 *end = (u8 *) data + length; + pr_debug("packetize_data: data length %d\n", length); + if (!rbu_data.packetsize) { + printk(KERN_WARNING + "dell_rbu: packetsize not specified\n"); + return -EIO; + } - if (!rbu_data.packet_write_count) { - if ((rc = create_packet(length))) + temp = (u8 *) data; + + /* packetize the hunk */ + while (!done) { + if ((temp + rbu_data.packetsize) < end) + packet_length = rbu_data.packetsize; + else { + /* this is the last packet */ + packet_length = end - temp; + done = 1; + } + + if ((rc = create_packet(temp, packet_length))) return rc; + + pr_debug("%lu:%lu\n", temp, (end - temp)); + temp += packet_length; } - if ((rc = fill_last_packet(data, length))) - return rc; + + rbu_data.imagesize = length; return rc; } @@ -243,7 +228,7 @@ static int do_packet_read(char *data, struct list_head *ptemp_list, return bytes_copied; } -static int packet_read_list(char *data, size_t *pread_length) +static int packet_read_list(char *data, size_t * pread_length) { struct list_head *ptemp_list; int temp_count = 0; @@ -303,10 +288,9 @@ static void packet_empty_list(void) newpacket->ordernum); kfree(newpacket); } - rbu_data.packet_write_count = 0; rbu_data.packet_read_count = 0; rbu_data.num_packets = 0; - rbu_data.packetsize = 0; + rbu_data.imagesize = 0; } /* @@ -425,7 +409,6 @@ static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count) size_t bytes_left; size_t data_length; char *ptempBuf = buffer; - unsigned long imagesize; /* check to see if we have something to return */ if (rbu_data.num_packets == 0) { @@ -434,22 +417,20 @@ static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count) goto read_rbu_data_exit; } - imagesize = rbu_data.num_packets * rbu_data.packetsize; - - if (pos > imagesize) { + if (pos > rbu_data.imagesize) { retval = 0; printk(KERN_WARNING "dell_rbu:read_packet_data: " "data underrun\n"); goto read_rbu_data_exit; } - bytes_left = imagesize - pos; + bytes_left = rbu_data.imagesize - pos; data_length = min(bytes_left, count); if ((retval = packet_read_list(ptempBuf, &data_length)) < 0) goto read_rbu_data_exit; - if ((pos + count) > imagesize) { + if ((pos + count) > rbu_data.imagesize) { rbu_data.packet_read_count = 0; /* this was the last copy */ retval = bytes_left; @@ -499,7 +480,7 @@ static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count) } static ssize_t read_rbu_data(struct kobject *kobj, char *buffer, - loff_t pos, size_t count) + loff_t pos, size_t count) { ssize_t ret_count = 0; @@ -531,13 +512,18 @@ static void callbackfn_rbu(const struct firmware *fw, void *context) memcpy(rbu_data.image_update_buffer, fw->data, fw->size); } else if (!strcmp(image_type, "packet")) { - if (!rbu_data.packetsize) - rbu_data.packetsize = fw->size; - else if (rbu_data.packetsize != fw->size) { + /* + * we need to free previous packets if a + * new hunk of packets needs to be downloaded + */ + packet_empty_list(); + if (packetize_data(fw->data, fw->size)) + /* Incase something goes wrong when we are + * in middle of packetizing the data, we + * need to free up whatever packets might + * have been created before we quit. + */ packet_empty_list(); - rbu_data.packetsize = fw->size; - } - packetize_data(fw->data, fw->size); } else pr_debug("invalid image type specified.\n"); spin_unlock(&rbu_data.lock); @@ -553,7 +539,7 @@ static void callbackfn_rbu(const struct firmware *fw, void *context) } static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer, - loff_t pos, size_t count) + loff_t pos, size_t count) { int size = 0; if (!pos) @@ -562,7 +548,7 @@ static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer, } static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer, - loff_t pos, size_t count) + loff_t pos, size_t count) { int rc = count; int req_firm_rc = 0; @@ -621,25 +607,49 @@ static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer, return rc; } +static ssize_t read_rbu_packet_size(struct kobject *kobj, char *buffer, + loff_t pos, size_t count) +{ + int size = 0; + if (!pos) { + spin_lock(&rbu_data.lock); + size = sprintf(buffer, "%lu\n", rbu_data.packetsize); + spin_unlock(&rbu_data.lock); + } + return size; +} + +static ssize_t write_rbu_packet_size(struct kobject *kobj, char *buffer, + loff_t pos, size_t count) +{ + unsigned long temp; + spin_lock(&rbu_data.lock); + packet_empty_list(); + sscanf(buffer, "%lu", &temp); + if (temp < 0xffffffff) + rbu_data.packetsize = temp; + + spin_unlock(&rbu_data.lock); + return count; +} + static struct bin_attribute rbu_data_attr = { - .attr = { - .name = "data", - .owner = THIS_MODULE, - .mode = 0444, - }, + .attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444}, .read = read_rbu_data, }; static struct bin_attribute rbu_image_type_attr = { - .attr = { - .name = "image_type", - .owner = THIS_MODULE, - .mode = 0644, - }, + .attr = {.name = "image_type",.owner = THIS_MODULE,.mode = 0644}, .read = read_rbu_image_type, .write = write_rbu_image_type, }; +static struct bin_attribute rbu_packet_size_attr = { + .attr = {.name = "packet_size",.owner = THIS_MODULE,.mode = 0644}, + .read = read_rbu_packet_size, + .write = write_rbu_packet_size, +}; + static int __init dcdrbu_init(void) { int rc = 0; @@ -657,6 +667,8 @@ static int __init dcdrbu_init(void) sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr); sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr); + sysfs_create_bin_file(&rbu_device->dev.kobj, + &rbu_packet_size_attr); rc = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG, "dell_rbu", &rbu_device->dev, &context, callbackfn_rbu); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9e9cf140731..5275cbb1afe 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1101,6 +1101,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) ide_hwif_t *hwif; struct request *rq; ide_startstop_t startstop; + int loops = 0; /* for atari only: POSSIBLY BROKEN HERE(?) */ ide_get_lock(ide_intr, hwgroup); @@ -1153,6 +1154,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) /* no more work for this hwgroup (for now) */ return; } + again: hwif = HWIF(drive); if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif && @@ -1192,8 +1194,14 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) * though. I hope that doesn't happen too much, hopefully not * unless the subdriver triggers such a thing in its own PM * state machine. + * + * We count how many times we loop here to make sure we service + * all drives in the hwgroup without looping for ever */ if (drive->blocked && !blk_pm_request(rq) && !(rq->flags & REQ_PREEMPT)) { + drive = drive->next ? drive->next : hwgroup->drive; + if (loops++ < 4 && !blk_queue_plugged(drive->queue)) + goto again; /* We clear busy, there should be no pending ATA command at this point. */ hwgroup->busy = 0; break; diff --git a/drivers/ieee1394/amdtp.c b/drivers/ieee1394/amdtp.c index 84ae027b021..e8e28569a66 100644 --- a/drivers/ieee1394/amdtp.c +++ b/drivers/ieee1394/amdtp.c @@ -1297,4 +1297,3 @@ static void __exit amdtp_exit_module (void) module_init(amdtp_init_module); module_exit(amdtp_exit_module); -MODULE_ALIAS_CHARDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_AMDTP * 16); diff --git a/drivers/ieee1394/csr1212.h b/drivers/ieee1394/csr1212.h index e6734263a1d..28c5f4b726e 100644 --- a/drivers/ieee1394/csr1212.h +++ b/drivers/ieee1394/csr1212.h @@ -37,7 +37,6 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/interrupt.h> -#include <linux/sched.h> #include <linux/vmalloc.h> #include <asm/pgalloc.h> diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 4538b0235ca..e34730c7a87 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -2660,4 +2660,3 @@ static int __init dv1394_init_module(void) module_init(dv1394_init_module); module_exit(dv1394_exit_module); -MODULE_ALIAS_CHARDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16); diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c index cd53c174ced..4802bbbb6dc 100644 --- a/drivers/ieee1394/eth1394.c +++ b/drivers/ieee1394/eth1394.c @@ -89,7 +89,7 @@ #define TRACE() printk(KERN_ERR "%s:%s[%d] ---- TRACE\n", driver_name, __FUNCTION__, __LINE__) static char version[] __devinitdata = - "$Rev: 1264 $ Ben Collins <bcollins@debian.org>"; + "$Rev: 1312 $ Ben Collins <bcollins@debian.org>"; struct fragment_info { struct list_head list; @@ -221,9 +221,7 @@ static int ether1394_open (struct net_device *dev) if (priv->bc_state == ETHER1394_BC_ERROR) { /* we'll try again */ priv->iso = hpsb_iso_recv_init(priv->host, - ETHER1394_GASP_BUFFERS * 2 * - (1 << (priv->host->csr.max_rec + - 1)), + ETHER1394_ISO_BUF_SIZE, ETHER1394_GASP_BUFFERS, priv->broadcast_channel, HPSB_ISO_DMA_PACKET_PER_BUFFER, @@ -635,8 +633,8 @@ static void ether1394_add_host (struct hpsb_host *host) * be checked when the eth device is opened. */ priv->broadcast_channel = host->csr.broadcast_channel & 0x3f; - priv->iso = hpsb_iso_recv_init(host, (ETHER1394_GASP_BUFFERS * 2 * - (1 << (host->csr.max_rec + 1))), + priv->iso = hpsb_iso_recv_init(host, + ETHER1394_ISO_BUF_SIZE, ETHER1394_GASP_BUFFERS, priv->broadcast_channel, HPSB_ISO_DMA_PACKET_PER_BUFFER, @@ -1770,7 +1768,7 @@ fail: static void ether1394_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { strcpy (info->driver, driver_name); - strcpy (info->version, "$Rev: 1264 $"); + strcpy (info->version, "$Rev: 1312 $"); /* FIXME XXX provide sane businfo */ strcpy (info->bus_info, "ieee1394"); } diff --git a/drivers/ieee1394/eth1394.h b/drivers/ieee1394/eth1394.h index ed8f1c4b7fd..a77213cfc48 100644 --- a/drivers/ieee1394/eth1394.h +++ b/drivers/ieee1394/eth1394.h @@ -44,6 +44,12 @@ #define ETHER1394_GASP_BUFFERS 16 +/* rawiso buffer size - due to a limitation in rawiso, we must limit each + * GASP buffer to be less than PAGE_SIZE. */ +#define ETHER1394_ISO_BUF_SIZE ETHER1394_GASP_BUFFERS * \ + min((unsigned int)PAGE_SIZE, \ + 2 * (1U << (priv->host->csr.max_rec + 1))) + /* Node set == 64 */ #define NODE_SET (ALL_NODES + 1) diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c index c502c6e9c44..aeeaeb670d0 100644 --- a/drivers/ieee1394/hosts.c +++ b/drivers/ieee1394/hosts.c @@ -18,6 +18,7 @@ #include <linux/slab.h> #include <linux/pci.h> #include <linux/timer.h> +#include <linux/jiffies.h> #include "csr1212.h" #include "ieee1394.h" @@ -217,7 +218,7 @@ int hpsb_update_config_rom_image(struct hpsb_host *host) /* IEEE 1394a-2000 prohibits using the same generation number * twice in a 60 second period. */ - if (jiffies - host->csr.gen_timestamp[next_gen] < 60 * HZ) + if (time_before(jiffies, host->csr.gen_timestamp[next_gen] + 60 * HZ)) /* Wait 60 seconds from the last time this generation number was * used. */ reset_delay = (60 * HZ) + host->csr.gen_timestamp[next_gen] - jiffies; diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h index 739e76840d5..38f42112dff 100644 --- a/drivers/ieee1394/hosts.h +++ b/drivers/ieee1394/hosts.h @@ -135,17 +135,17 @@ enum isoctl_cmd { enum reset_types { /* 166 microsecond reset -- only type of reset available on - non-1394a capable IEEE 1394 controllers */ + non-1394a capable controllers */ LONG_RESET, /* Short (arbitrated) reset -- only available on 1394a capable - IEEE 1394 capable controllers */ + controllers */ SHORT_RESET, - /* Variants, that set force_root before issueing the bus reset */ + /* Variants that set force_root before issueing the bus reset */ LONG_RESET_FORCE_ROOT, SHORT_RESET_FORCE_ROOT, - /* Variants, that clear force_root before issueing the bus reset */ + /* Variants that clear force_root before issueing the bus reset */ LONG_RESET_NO_FORCE_ROOT, SHORT_RESET_NO_FORCE_ROOT }; diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index d633770fac8..32a1e016c85 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -70,7 +70,7 @@ const char *hpsb_speedto_str[] = { "S100", "S200", "S400", "S800", "S1600", "S32 struct class *hpsb_protocol_class; #ifdef CONFIG_IEEE1394_VERBOSEDEBUG -static void dump_packet(const char *text, quadlet_t *data, int size) +static void dump_packet(const char *text, quadlet_t *data, int size, int speed) { int i; @@ -78,12 +78,15 @@ static void dump_packet(const char *text, quadlet_t *data, int size) size = (size > 4 ? 4 : size); printk(KERN_DEBUG "ieee1394: %s", text); + if (speed > -1 && speed < 6) + printk(" at %s", hpsb_speedto_str[speed]); + printk(":"); for (i = 0; i < size; i++) printk(" %08x", data[i]); printk("\n"); } #else -#define dump_packet(x,y,z) +#define dump_packet(a,b,c,d) #endif static void abort_requests(struct hpsb_host *host); @@ -544,8 +547,7 @@ int hpsb_send_packet(struct hpsb_packet *packet) if (packet->data_size) memcpy(((u8*)data) + packet->header_size, packet->data, packet->data_size); - dump_packet("send packet local:", packet->header, - packet->header_size); + dump_packet("send packet local", packet->header, packet->header_size, -1); hpsb_packet_sent(host, packet, packet->expect_response ? ACK_PENDING : ACK_COMPLETE); hpsb_packet_received(host, data, size, 0); @@ -561,21 +563,7 @@ int hpsb_send_packet(struct hpsb_packet *packet) + NODEID_TO_NODE(packet->node_id)]; } -#ifdef CONFIG_IEEE1394_VERBOSEDEBUG - switch (packet->speed_code) { - case 2: - dump_packet("send packet 400:", packet->header, - packet->header_size); - break; - case 1: - dump_packet("send packet 200:", packet->header, - packet->header_size); - break; - default: - dump_packet("send packet 100:", packet->header, - packet->header_size); - } -#endif + dump_packet("send packet", packet->header, packet->header_size, packet->speed_code); return host->driver->transmit_packet(host, packet); } @@ -636,7 +624,7 @@ static void handle_packet_response(struct hpsb_host *host, int tcode, if (packet == NULL) { HPSB_DEBUG("unsolicited response packet received - no tlabel match"); - dump_packet("contents:", data, 16); + dump_packet("contents", data, 16, -1); spin_unlock_irqrestore(&host->pending_packet_queue.lock, flags); return; } @@ -677,7 +665,7 @@ static void handle_packet_response(struct hpsb_host *host, int tcode, if (!tcode_match) { spin_unlock_irqrestore(&host->pending_packet_queue.lock, flags); HPSB_INFO("unsolicited response packet received - tcode mismatch"); - dump_packet("contents:", data, 16); + dump_packet("contents", data, 16, -1); return; } @@ -914,7 +902,7 @@ void hpsb_packet_received(struct hpsb_host *host, quadlet_t *data, size_t size, return; } - dump_packet("received packet:", data, size); + dump_packet("received packet", data, size, -1); tcode = (data[0] >> 4) & 0xf; diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index b23322523ef..347ece6b583 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -64,10 +64,10 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, struct nodemgr_csr_info *ci = (struct nodemgr_csr_info*)__ci; int i, ret = 0; - for (i = 0; i < 3; i++) { + for (i = 1; ; i++) { ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr, buffer, length); - if (!ret) + if (!ret || i == 3) break; if (msleep_interruptible(334)) @@ -1438,9 +1438,13 @@ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) if (host->busmgr_id == 0xffff && host->node_count > 1) { u16 root_node = host->node_count - 1; - struct node_entry *ne = find_entry_by_nodeid(host, root_node | LOCAL_BUS); - if (ne && ne->busopt.cmc) + /* get cycle master capability flag from root node */ + if (host->is_cycmst || + (!hpsb_read(host, LOCAL_BUS | root_node, get_hpsb_generation(host), + (CSR_REGISTER_BASE + CSR_CONFIG_ROM + 2 * sizeof(quadlet_t)), + &bc, sizeof(quadlet_t)) && + be32_to_cpu(bc) & 1 << CSR_CMC_SHIFT)) hpsb_send_phy_config(host, root_node, -1); else { HPSB_DEBUG("The root node is not cycle master capable; " @@ -1557,24 +1561,19 @@ static int nodemgr_host_thread(void *__hi) } } - if (!nodemgr_check_irm_capability(host, reset_cycles)) { + if (!nodemgr_check_irm_capability(host, reset_cycles) || + !nodemgr_do_irm_duties(host, reset_cycles)) { reset_cycles++; up(&nodemgr_serialize); continue; } + reset_cycles = 0; /* Scan our nodes to get the bus options and create node * entries. This does not do the sysfs stuff, since that * would trigger hotplug callbacks and such, which is a * bad idea at this point. */ nodemgr_node_scan(hi, generation); - if (!nodemgr_do_irm_duties(host, reset_cycles)) { - reset_cycles++; - up(&nodemgr_serialize); - continue; - } - - reset_cycles = 0; /* This actually does the full probe, with sysfs * registration. */ diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index 27018c8efc2..6a6acbd80af 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -162,7 +162,7 @@ printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args) printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args) static char version[] __devinitdata = - "$Rev: 1299 $ Ben Collins <bcollins@debian.org>"; + "$Rev: 1313 $ Ben Collins <bcollins@debian.org>"; /* Module Parameters */ static int phys_dma = 1; @@ -1084,7 +1084,7 @@ static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg) initialize_dma_rcv_ctx(&ohci->ir_legacy_context, 1); if (printk_ratelimit()) - PRINT(KERN_ERR, "IR legacy activated"); + DBGMSG("IR legacy activated"); } spin_lock_irqsave(&ohci->IR_channel_lock, flags); diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index b4fa14793fe..315f5ca8bed 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -98,7 +98,7 @@ static struct hpsb_address_ops arm_ops = { static void queue_complete_cb(struct pending_request *req); -static struct pending_request *__alloc_pending_request(unsigned int __nocast flags) +static struct pending_request *__alloc_pending_request(gfp_t flags) { struct pending_request *req; @@ -2958,4 +2958,3 @@ static void __exit cleanup_raw1394(void) module_init(init_raw1394); module_exit(cleanup_raw1394); MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16); diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index de88218ef7c..12cec7c4a34 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -97,16 +97,18 @@ static char version[] __devinitdata = */ static int max_speed = IEEE1394_SPEED_MAX; module_param(max_speed, int, 0644); -MODULE_PARM_DESC(max_speed, "Force max speed (3 = 800mb, 2 = 400mb default, 1 = 200mb, 0 = 100mb)"); +MODULE_PARM_DESC(max_speed, "Force max speed (3 = 800mb, 2 = 400mb, 1 = 200mb, 0 = 100mb)"); /* * Set serialize_io to 1 if you'd like only one scsi command sent * down to us at a time (debugging). This might be necessary for very * badly behaved sbp2 devices. + * + * TODO: Make this configurable per device. */ -static int serialize_io; +static int serialize_io = 1; module_param(serialize_io, int, 0444); -MODULE_PARM_DESC(serialize_io, "Serialize all I/O coming down from the scsi drivers (default = 0)"); +MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default = 1, faster = 0)"); /* * Bump up max_sectors if you'd like to support very large sized @@ -596,6 +598,14 @@ static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_i spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); } +/* + * Is scsi_id valid? Is the 1394 node still present? + */ +static inline int sbp2util_node_is_available(struct scsi_id_instance_data *scsi_id) +{ + return scsi_id && scsi_id->ne && !scsi_id->ne->in_limbo; +} + /********************************************* @@ -631,11 +641,23 @@ static int sbp2_remove(struct device *dev) { struct unit_directory *ud; struct scsi_id_instance_data *scsi_id; + struct scsi_device *sdev; SBP2_DEBUG("sbp2_remove"); ud = container_of(dev, struct unit_directory, device); scsi_id = ud->device.driver_data; + if (!scsi_id) + return 0; + + /* Trigger shutdown functions in scsi's highlevel. */ + if (scsi_id->scsi_host) + scsi_unblock_requests(scsi_id->scsi_host); + sdev = scsi_id->sdev; + if (sdev) { + scsi_id->sdev = NULL; + scsi_remove_device(sdev); + } sbp2_logout_device(scsi_id); sbp2_remove_device(scsi_id); @@ -2473,37 +2495,26 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt, struct scsi_id_instance_data *scsi_id = (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; struct sbp2scsi_host_info *hi; + int result = DID_NO_CONNECT << 16; SBP2_DEBUG("sbp2scsi_queuecommand"); - /* - * If scsi_id is null, it means there is no device in this slot, - * so we should return selection timeout. - */ - if (!scsi_id) { - SCpnt->result = DID_NO_CONNECT << 16; - done (SCpnt); - return 0; - } + if (!sbp2util_node_is_available(scsi_id)) + goto done; hi = scsi_id->hi; if (!hi) { SBP2_ERR("sbp2scsi_host_info is NULL - this is bad!"); - SCpnt->result = DID_NO_CONNECT << 16; - done (SCpnt); - return(0); + goto done; } /* * Until we handle multiple luns, just return selection time-out * to any IO directed at non-zero LUNs */ - if (SCpnt->device->lun) { - SCpnt->result = DID_NO_CONNECT << 16; - done (SCpnt); - return(0); - } + if (SCpnt->device->lun) + goto done; /* * Check for request sense command, and handle it here @@ -2514,7 +2525,7 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt, memcpy(SCpnt->request_buffer, SCpnt->sense_buffer, SCpnt->request_bufflen); memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer)); sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_GOOD, SCpnt, done); - return(0); + return 0; } /* @@ -2522,9 +2533,8 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt, */ if (!hpsb_node_entry_valid(scsi_id->ne)) { SBP2_ERR("Bus reset in progress - rejecting command"); - SCpnt->result = DID_BUS_BUSY << 16; - done (SCpnt); - return(0); + result = DID_BUS_BUSY << 16; + goto done; } /* @@ -2535,8 +2545,12 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt, sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_SELECTION_TIMEOUT, SCpnt, done); } + return 0; - return(0); +done: + SCpnt->result = result; + done(SCpnt); + return 0; } /* @@ -2683,14 +2697,27 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, } -static int sbp2scsi_slave_configure (struct scsi_device *sdev) +static int sbp2scsi_slave_alloc(struct scsi_device *sdev) { - blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); + ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev; + return 0; +} + +static int sbp2scsi_slave_configure(struct scsi_device *sdev) +{ + blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); return 0; } +static void sbp2scsi_slave_destroy(struct scsi_device *sdev) +{ + ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = NULL; + return; +} + + /* * Called by scsi stack when something has really gone wrong. Usually * called when a command has timed-out for some reason. @@ -2705,7 +2732,7 @@ static int sbp2scsi_abort(struct scsi_cmnd *SCpnt) SBP2_ERR("aborting sbp2 command"); scsi_print_command(SCpnt); - if (scsi_id) { + if (sbp2util_node_is_available(scsi_id)) { /* * Right now, just return any matching command structures @@ -2742,31 +2769,24 @@ static int sbp2scsi_abort(struct scsi_cmnd *SCpnt) /* * Called by scsi stack when something has really gone wrong. */ -static int __sbp2scsi_reset(struct scsi_cmnd *SCpnt) +static int sbp2scsi_reset(struct scsi_cmnd *SCpnt) { struct scsi_id_instance_data *scsi_id = (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; + unsigned long flags; SBP2_ERR("reset requested"); - if (scsi_id) { + spin_lock_irqsave(SCpnt->device->host->host_lock, flags); + + if (sbp2util_node_is_available(scsi_id)) { SBP2_ERR("Generating sbp2 fetch agent reset"); sbp2_agent_reset(scsi_id, 0); } - return(SUCCESS); -} - -static int sbp2scsi_reset(struct scsi_cmnd *SCpnt) -{ - unsigned long flags; - int rc; - - spin_lock_irqsave(SCpnt->device->host->host_lock, flags); - rc = __sbp2scsi_reset(SCpnt); spin_unlock_irqrestore(SCpnt->device->host->host_lock, flags); - return rc; + return SUCCESS; } static const char *sbp2scsi_info (struct Scsi_Host *host) @@ -2817,7 +2837,9 @@ static struct scsi_host_template scsi_driver_template = { .eh_device_reset_handler = sbp2scsi_reset, .eh_bus_reset_handler = sbp2scsi_reset, .eh_host_reset_handler = sbp2scsi_reset, + .slave_alloc = sbp2scsi_slave_alloc, .slave_configure = sbp2scsi_slave_configure, + .slave_destroy = sbp2scsi_slave_destroy, .this_id = -1, .sg_tablesize = SG_ALL, .use_clustering = ENABLE_CLUSTERING, @@ -2837,7 +2859,8 @@ static int sbp2_module_init(void) /* Module load debug option to force one command at a time (serializing I/O) */ if (serialize_io) { - SBP2_ERR("Driver forced to serialize I/O (serialize_io = 1)"); + SBP2_INFO("Driver forced to serialize I/O (serialize_io=1)"); + SBP2_INFO("Try serialize_io=0 for better performance"); scsi_driver_template.can_queue = 1; scsi_driver_template.cmd_per_lun = 1; } diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c index 9d6facf2f78..11be9c9c82a 100644 --- a/drivers/ieee1394/video1394.c +++ b/drivers/ieee1394/video1394.c @@ -1571,4 +1571,3 @@ static int __init video1394_init_module (void) module_init(video1394_init_module); module_exit(video1394_exit_module); -MODULE_ALIAS_CHARDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_VIDEO1394 * 16); diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index a4a4d9c1eef..a14ca87fda1 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -783,7 +783,7 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, struct ib_ah *ah, int rmpp_active, int hdr_len, int data_len, - unsigned int __nocast gfp_mask) + gfp_t gfp_mask) { struct ib_mad_agent_private *mad_agent_priv; struct ib_mad_send_buf *send_buf; diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 78de2dd1a4f..262618210c1 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -574,7 +574,7 @@ static void ib_sa_path_rec_release(struct ib_sa_query *sa_query) int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, struct ib_sa_path_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_path_rec *resp, void *context), @@ -676,7 +676,7 @@ static void ib_sa_service_rec_release(struct ib_sa_query *sa_query) int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_service_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_service_rec *resp, void *context), @@ -759,7 +759,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_mcmember_rec *rec, ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, + int timeout_ms, gfp_t gfp_mask, void (*callback)(int status, struct ib_sa_mcmember_rec *resp, void *context), diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index ffbcd40418d..23a3f56c789 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -503,6 +503,25 @@ err_free_aux: return err; } +static void mthca_free_icms(struct mthca_dev *mdev) +{ + u8 status; + + mthca_free_icm_table(mdev, mdev->mcg_table.table); + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) + mthca_free_icm_table(mdev, mdev->srq_table.table); + mthca_free_icm_table(mdev, mdev->cq_table.table); + mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); + mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); + mthca_free_icm_table(mdev, mdev->qp_table.qp_table); + mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); + mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); + mthca_unmap_eq_icm(mdev); + + mthca_UNMAP_ICM_AUX(mdev, &status); + mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); +} + static int __devinit mthca_init_arbel(struct mthca_dev *mdev) { struct mthca_dev_lim dev_lim; @@ -580,18 +599,7 @@ static int __devinit mthca_init_arbel(struct mthca_dev *mdev) return 0; err_free_icm: - if (mdev->mthca_flags & MTHCA_FLAG_SRQ) - mthca_free_icm_table(mdev, mdev->srq_table.table); - mthca_free_icm_table(mdev, mdev->cq_table.table); - mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); - mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); - mthca_free_icm_table(mdev, mdev->qp_table.qp_table); - mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); - mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); - mthca_unmap_eq_icm(mdev); - - mthca_UNMAP_ICM_AUX(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icms(mdev); err_stop_fw: mthca_UNMAP_FA(mdev, &status); @@ -611,18 +619,7 @@ static void mthca_close_hca(struct mthca_dev *mdev) mthca_CLOSE_HCA(mdev, 0, &status); if (mthca_is_memfree(mdev)) { - if (mdev->mthca_flags & MTHCA_FLAG_SRQ) - mthca_free_icm_table(mdev, mdev->srq_table.table); - mthca_free_icm_table(mdev, mdev->cq_table.table); - mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); - mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); - mthca_free_icm_table(mdev, mdev->qp_table.qp_table); - mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); - mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); - mthca_unmap_eq_icm(mdev); - - mthca_UNMAP_ICM_AUX(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icms(mdev); mthca_UNMAP_FA(mdev, &status); mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 704f48e0b6a..6c5bf07489f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -474,7 +474,7 @@ err: spin_unlock(&priv->lock); } -static void path_lookup(struct sk_buff *skb, struct net_device *dev) +static void ipoib_path_lookup(struct sk_buff *skb, struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(skb->dev); @@ -569,7 +569,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) if (skb->dst && skb->dst->neighbour) { if (unlikely(!*to_ipoib_neigh(skb->dst->neighbour))) { - path_lookup(skb, dev); + ipoib_path_lookup(skb, dev); goto out; } diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c index e1f0d87de0e..0b0ea26023e 100644 --- a/drivers/isdn/divert/divert_procfs.c +++ b/drivers/isdn/divert/divert_procfs.c @@ -287,12 +287,12 @@ divert_dev_init(void) init_waitqueue_head(&rd_queue); #ifdef CONFIG_PROC_FS - isdn_proc_entry = create_proc_entry("isdn", S_IFDIR | S_IRUGO | S_IXUGO, proc_net); + isdn_proc_entry = proc_mkdir("net/isdn", NULL); if (!isdn_proc_entry) return (-1); isdn_divert_entry = create_proc_entry("divert", S_IFREG | S_IRUGO, isdn_proc_entry); if (!isdn_divert_entry) { - remove_proc_entry("isdn", proc_net); + remove_proc_entry("net/isdn", NULL); return (-1); } isdn_divert_entry->proc_fops = &isdn_fops; @@ -312,7 +312,7 @@ divert_dev_deinit(void) #ifdef CONFIG_PROC_FS remove_proc_entry("divert", isdn_proc_entry); - remove_proc_entry("isdn", proc_net); + remove_proc_entry("net/isdn", NULL); #endif /* CONFIG_PROC_FS */ return (0); diff --git a/drivers/isdn/hardware/eicon/diva_didd.c b/drivers/isdn/hardware/eicon/diva_didd.c index 7fdf8ae5be5..27204f4b111 100644 --- a/drivers/isdn/hardware/eicon/diva_didd.c +++ b/drivers/isdn/hardware/eicon/diva_didd.c @@ -30,8 +30,6 @@ static char *DRIVERNAME = static char *DRIVERLNAME = "divadidd"; char *DRIVERRELEASE_DIDD = "2.0"; -static char *main_proc_dir = "eicon"; - MODULE_DESCRIPTION("DIDD table driver for diva drivers"); MODULE_AUTHOR("Cytronics & Melware, Eicon Networks"); MODULE_SUPPORTED_DEVICE("Eicon diva drivers"); @@ -89,7 +87,7 @@ proc_read(char *page, char **start, off_t off, int count, int *eof, static int DIVA_INIT_FUNCTION create_proc(void) { - proc_net_eicon = create_proc_entry(main_proc_dir, S_IFDIR, proc_net); + proc_net_eicon = proc_mkdir("net/eicon", NULL); if (proc_net_eicon) { if ((proc_didd = @@ -105,7 +103,7 @@ static int DIVA_INIT_FUNCTION create_proc(void) static void DIVA_EXIT_FUNCTION remove_proc(void) { remove_proc_entry(DRIVERLNAME, proc_net_eicon); - remove_proc_entry(main_proc_dir, proc_net); + remove_proc_entry("net/eicon", NULL); } static int DIVA_INIT_FUNCTION divadidd_init(void) diff --git a/drivers/isdn/hardware/eicon/divasproc.c b/drivers/isdn/hardware/eicon/divasproc.c index b6435589d45..c12efa6f842 100644 --- a/drivers/isdn/hardware/eicon/divasproc.c +++ b/drivers/isdn/hardware/eicon/divasproc.c @@ -381,7 +381,7 @@ int create_adapter_proc(diva_os_xdi_adapter_t * a) char tmp[16]; sprintf(tmp, "%s%d", adapter_dir_name, a->controller); - if (!(de = create_proc_entry(tmp, S_IFDIR, proc_net_eicon))) + if (!(de = proc_mkdir(tmp, proc_net_eicon))) return (0); a->proc_adapter_dir = (void *) de; diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c index 5da507e532f..639582f61f4 100644 --- a/drivers/isdn/hysdn/hysdn_procconf.c +++ b/drivers/isdn/hysdn/hysdn_procconf.c @@ -394,7 +394,7 @@ hysdn_procconf_init(void) hysdn_card *card; uchar conf_name[20]; - hysdn_proc_entry = create_proc_entry(PROC_SUBDIR_NAME, S_IFDIR | S_IRUGO | S_IXUGO, proc_net); + hysdn_proc_entry = proc_mkdir(PROC_SUBDIR_NAME, proc_net); if (!hysdn_proc_entry) { printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n"); return (-1); diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 5f283529620..34f3c7e2d83 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -153,8 +153,10 @@ static irqreturn_t smu_db_intr(int irq, void *arg, struct pt_regs *regs) spin_lock_irqsave(&smu->lock, flags); gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, smu->doorbell); - if ((gpio & 7) != 7) + if ((gpio & 7) != 7) { + spin_unlock_irqrestore(&smu->lock, flags); return IRQ_HANDLED; + } cmd = smu->cmd_cur; smu->cmd_cur = NULL; diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index b82bc315047..b6148f6f783 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -96,7 +96,7 @@ static kmem_cache_t *_crypt_io_pool; /* * Mempool alloc and free functions for the page */ -static void *mempool_alloc_page(unsigned int __nocast gfp_mask, void *data) +static void *mempool_alloc_page(gfp_t gfp_mask, void *data) { return alloc_page(gfp_mask); } diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 9de000131a8..4809b209fbb 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -32,7 +32,7 @@ struct io { static unsigned _num_ios; static mempool_t *_io_pool; -static void *alloc_io(unsigned int __nocast gfp_mask, void *pool_data) +static void *alloc_io(gfp_t gfp_mask, void *pool_data) { return kmalloc(sizeof(struct io), gfp_mask); } diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 86328251375..2375709a392 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -122,7 +122,7 @@ static inline sector_t region_to_sector(struct region_hash *rh, region_t region) /* FIXME move this */ static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw); -static void *region_alloc(unsigned int __nocast gfp_mask, void *pool_data) +static void *region_alloc(gfp_t gfp_mask, void *pool_data) { return kmalloc(sizeof(struct region), gfp_mask); } diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 286342375fb..1151c3ed300 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -38,7 +38,7 @@ static mdk_personality_t multipath_personality; -static void *mp_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void *mp_pool_alloc(gfp_t gfp_flags, void *data) { struct multipath_bh *mpb; mpb = kmalloc(sizeof(*mpb), gfp_flags); diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a93ca478142..0e1f148dd41 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -52,7 +52,7 @@ static mdk_personality_t raid1_personality; static void unplug_slaves(mddev_t *mddev); -static void * r1bio_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data) { struct pool_info *pi = data; r1bio_t *r1_bio; @@ -79,7 +79,7 @@ static void r1bio_pool_free(void *r1_bio, void *data) #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE) #define RESYNC_WINDOW (2048*1024) -static void * r1buf_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data) { struct pool_info *pi = data; struct page *page; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 5bd1e9ec899..28dd028415e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -47,7 +47,7 @@ static void unplug_slaves(mddev_t *mddev); -static void * r10bio_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data) { conf_t *conf = data; r10bio_t *r10_bio; @@ -81,7 +81,7 @@ static void r10bio_pool_free(void *r10_bio, void *data) * one for write (we recover only one drive per r10buf) * */ -static void * r10buf_pool_alloc(unsigned int __nocast gfp_flags, void *data) +static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data) { conf_t *conf = data; struct page *page; diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c index 190977a1e54..0881a17d522 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bttv-cards.c @@ -2393,12 +2393,12 @@ struct tvcard bttv_tvcards[] = { .tuner = 0, .tuner_type = TUNER_LG_TDVS_H062F, .tuner_addr = ADDR_UNSET, - .video_inputs = 2, + .video_inputs = 3, .audio_inputs = 1, .svhs = 2, - .muxsel = { 2, 3 }, + .muxsel = { 2, 3, 1 }, .gpiomask = 0x00e00007, - .audiomux = { 0x00400005, 0, 0, 0, 0, 0 }, + .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 }, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index 8c08b7f1ad2..b7ec9bf4508 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -1397,7 +1397,7 @@ static void destroy_proc_cpia_cam(struct cam_data *cam) static void proc_cpia_create(void) { - cpia_proc_root = create_proc_entry("cpia", S_IFDIR, NULL); + cpia_proc_root = proc_mkdir("cpia", NULL); if (cpia_proc_root) cpia_proc_root->owner = THIS_MODULE; diff --git a/drivers/media/video/rds.h b/drivers/media/video/rds.h index 30337d0f1a8..0d30eb744e6 100644 --- a/drivers/media/video/rds.h +++ b/drivers/media/video/rds.h @@ -31,7 +31,7 @@ struct rds_command { unsigned int block_count; int result; - unsigned char *buffer; + unsigned char __user *buffer; struct file *instance; poll_table *event_list; }; diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index 1a657a70ff4..72b70eb5da1 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -157,7 +157,7 @@ static struct i2c_client client_template; /* ---------------------------------------------------------------------- */ -static int block_to_user_buf(struct saa6588 *s, unsigned char *user_buf) +static int block_to_user_buf(struct saa6588 *s, unsigned char __user *user_buf) { int i; @@ -191,7 +191,7 @@ static void read_from_buf(struct saa6588 *s, struct rds_command *a) { unsigned long flags; - unsigned char *buf_ptr = a->buffer; /* This is a user space buffer! */ + unsigned char __user *buf_ptr = a->buffer; unsigned int i; unsigned int rd_blocks; diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 10f6ce1bc0a..e335d54c465 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -457,6 +457,17 @@ static int ucb1x00_detect_irq(struct ucb1x00 *ucb) return probe_irq_off(mask); } +static void ucb1x00_release(struct class_device *dev) +{ + struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); + kfree(ucb); +} + +static struct class ucb1x00_class = { + .name = "ucb1x00", + .release = ucb1x00_release, +}; + static int ucb1x00_probe(struct mcp *mcp) { struct ucb1x00 *ucb; @@ -546,17 +557,6 @@ static void ucb1x00_remove(struct mcp *mcp) class_device_unregister(&ucb->cdev); } -static void ucb1x00_release(struct class_device *dev) -{ - struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); - kfree(ucb); -} - -static struct class ucb1x00_class = { - .name = "ucb1x00", - .release = ucb1x00_release, -}; - int ucb1x00_register_driver(struct ucb1x00_driver *drv) { struct ucb1x00 *ucb; @@ -642,8 +642,6 @@ static void __exit ucb1x00_exit(void) module_init(ucb1x00_init); module_exit(ucb1x00_exit); -EXPORT_SYMBOL(ucb1x00_class); - EXPORT_SYMBOL(ucb1x00_io_set_dir); EXPORT_SYMBOL(ucb1x00_io_write); EXPORT_SYMBOL(ucb1x00_io_read); diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h index 6b632644f59..9c9a647d8b7 100644 --- a/drivers/mfd/ucb1x00.h +++ b/drivers/mfd/ucb1x00.h @@ -106,8 +106,6 @@ struct ucb1x00_irq { void (*fn)(int, void *); }; -extern struct class ucb1x00_class; - struct ucb1x00 { spinlock_t lock; struct mcp *mcp; diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c index 0c45464e3f7..0ba0ff7d43b 100644 --- a/drivers/mtd/maps/bast-flash.c +++ b/drivers/mtd/maps/bast-flash.c @@ -39,7 +39,6 @@ #include <linux/mtd/partitions.h> #include <asm/io.h> -#include <asm/mach-types.h> #include <asm/mach/flash.h> #include <asm/arch/map.h> diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index 3e94b616743..a9f86c7fbd5 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/mach/flash.h> #include <linux/reboot.h> diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 5afe660aa2c..3fcc3288407 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -26,7 +26,6 @@ #include <linux/ioport.h> #include <linux/device.h> #include <asm/io.h> -#include <asm/mach-types.h> #include <asm/mach/flash.h> #include <linux/reboot.h> @@ -254,6 +253,6 @@ module_init(ixp4xx_flash_init); module_exit(ixp4xx_flash_exit); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems") +MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems"); MODULE_AUTHOR("Deepak Saxena"); diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c index 8cc71409a32..b17bca657da 100644 --- a/drivers/mtd/maps/omap_nor.c +++ b/drivers/mtd/maps/omap_nor.c @@ -42,7 +42,6 @@ #include <asm/io.h> #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/mach/flash.h> #include <asm/arch/tc.h> diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 52385705da0..8dcaa357b4b 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -21,7 +21,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/concat.h> -#include <asm/mach-types.h> #include <asm/io.h> #include <asm/sizes.h> #include <asm/mach/flash.h> diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 891e3a1b911..b47ebcb31e0 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -58,7 +58,6 @@ #include <linux/mtd/partitions.h> #include <asm/io.h> -#include <asm/mach-types.h> #include <asm/hardware/clock.h> #include <asm/arch/regs-nand.h> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 96f14ab1c1f..c748b0e1641 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -548,6 +548,14 @@ config SUNGEM Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>. +config CASSINI + tristate "Sun Cassini support" + depends on NET_ETHERNET && PCI + select CRC32 + help + Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also + <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf> + config NET_VENDOR_3COM bool "3COM cards" depends on NET_ETHERNET && (ISA || EISA || MCA || PCI) @@ -1647,7 +1655,7 @@ config LAN_SAA9730 config NET_POCKET bool "Pocket and portable adapters" - depends on NET_ETHERNET && ISA + depends on NET_ETHERNET && PARPORT ---help--- Cute little network (Ethernet) devices which attach to the parallel port ("pocket adapters"), commonly used with laptops. If you have @@ -1671,7 +1679,7 @@ config NET_POCKET config ATP tristate "AT-LAN-TEC/RealTek pocket adapter support" - depends on NET_POCKET && ISA && X86 + depends on NET_POCKET && PARPORT && X86 select CRC32 ---help--- This is a network (Ethernet) device which attaches to your parallel @@ -1686,7 +1694,7 @@ config ATP config DE600 tristate "D-Link DE600 pocket adapter support" - depends on NET_POCKET && ISA + depends on NET_POCKET && PARPORT ---help--- This is a network (Ethernet) device which attaches to your parallel port. Read <file:Documentation/networking/DLINK.txt> as well as the @@ -1701,7 +1709,7 @@ config DE600 config DE620 tristate "D-Link DE620 pocket adapter support" - depends on NET_POCKET && ISA + depends on NET_POCKET && PARPORT ---help--- This is a network (Ethernet) device which attaches to your parallel port. Read <file:Documentation/networking/DLINK.txt> as well as the diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 8645c843cf4..8aeec9f2495 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SUNQE) += sunqe.o obj-$(CONFIG_SUNBMAC) += sunbmac.o obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o +obj-$(CONFIG_CASSINI) += cassini.o obj-$(CONFIG_MACE) += mace.o obj-$(CONFIG_BMAC) += bmac.o diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 9b659e3c8d6..c56d86d371a 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -15,16 +15,13 @@ */ #include <linux/kernel.h> #include <linux/types.h> -#include <linux/fcntl.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/in.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <linux/skbuff.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/crc32.h> @@ -33,7 +30,6 @@ #include <asm/system.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/dma.h> #define TX_BUFFERS 15 #define RX_BUFFERS 25 @@ -85,7 +81,7 @@ static inline unsigned short read_ireg(u_long base_addr, u_int reg) u_short v; __asm__( "str%?h %1, [%2] @ NAT_RAP\n\t" - "str%?h %0, [%2, #8] @ NET_IDP\n\t" + "ldr%?h %0, [%2, #8] @ NET_IDP\n\t" : "=r" (v) : "r" (reg), "r" (ISAIO_BASE + 0x0464)); return v; @@ -288,7 +284,7 @@ static void am79c961_timer(unsigned long data) else if (!lnkstat && carrier) netif_carrier_off(dev); - mod_timer(&priv->timer, jiffies + 5*HZ); + mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500)); } /* @@ -709,13 +705,9 @@ static int __init am79c961_init(void) goto release; am79c961_banner(); - printk(KERN_INFO "%s: ether address ", dev->name); - /* Retrive and print the ethernet address. */ - for (i = 0; i < 6; i++) { + for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff; - printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]); - } spin_lock_init(&priv->chip_lock); init_timer(&priv->timer); @@ -736,8 +728,14 @@ static int __init am79c961_init(void) #endif ret = register_netdev(dev); - if (ret == 0) + if (ret == 0) { + printk(KERN_INFO "%s: ether address ", dev->name); + + for (i = 0; i < 6; i++) + printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]); + return 0; + } release: release_region(dev->base_addr, 0x18); diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 8dc657fc8af..60dba4a1ca5 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -218,7 +218,7 @@ void bmwrite(struct net_device *dev, unsigned long reg_offset, unsigned data ) static inline -volatile unsigned short bmread(struct net_device *dev, unsigned long reg_offset ) +unsigned short bmread(struct net_device *dev, unsigned long reg_offset ) { return in_le16((void __iomem *)dev->base_addr + reg_offset); } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6d00c3de1a8..f264ff16297 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -487,6 +487,8 @@ * * Added xmit_hash_policy_layer34() * - Modified by Jay Vosburgh <fubar@us.ibm.com> to also support mode 4. * Set version to 2.6.3. + * 2005/09/26 - Jay Vosburgh <fubar@us.ibm.com> + * - Removed backwards compatibility for old ifenslaves. Version 2.6.4. */ //#define BONDING_DEBUG 1 @@ -595,14 +597,7 @@ static int arp_ip_count = 0; static int bond_mode = BOND_MODE_ROUNDROBIN; static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2; static int lacp_fast = 0; -static int app_abi_ver = 0; -static int orig_app_abi_ver = -1; /* This is used to save the first ABI version - * we receive from the application. Once set, - * it won't be changed, and the module will - * refuse to enslave/release interfaces if the - * command comes from an application using - * another ABI version. - */ + struct bond_parm_tbl { char *modename; int mode; @@ -1294,12 +1289,13 @@ static void bond_mc_list_destroy(struct bonding *bond) /* * Copy all the Multicast addresses from src to the bonding device dst */ -static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond, int gpf_flag) +static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond, + gfp_t gfp_flag) { struct dev_mc_list *dmi, *new_dmi; for (dmi = mc_list; dmi; dmi = dmi->next) { - new_dmi = kmalloc(sizeof(struct dev_mc_list), gpf_flag); + new_dmi = kmalloc(sizeof(struct dev_mc_list), gfp_flag); if (!new_dmi) { /* FIXME: Potential memory leak !!! */ @@ -1702,51 +1698,29 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de } } - if (app_abi_ver >= 1) { - /* The application is using an ABI, which requires the - * slave interface to be closed. - */ - if ((slave_dev->flags & IFF_UP)) { - printk(KERN_ERR DRV_NAME - ": Error: %s is up\n", - slave_dev->name); - res = -EPERM; - goto err_undo_flags; - } - - if (slave_dev->set_mac_address == NULL) { - printk(KERN_ERR DRV_NAME - ": Error: The slave device you specified does " - "not support setting the MAC address.\n"); - printk(KERN_ERR - "Your kernel likely does not support slave " - "devices.\n"); + /* + * Old ifenslave binaries are no longer supported. These can + * be identified with moderate accurary by the state of the slave: + * the current ifenslave will set the interface down prior to + * enslaving it; the old ifenslave will not. + */ + if ((slave_dev->flags & IFF_UP)) { + printk(KERN_ERR DRV_NAME ": %s is up. " + "This may be due to an out of date ifenslave.\n", + slave_dev->name); + res = -EPERM; + goto err_undo_flags; + } - res = -EOPNOTSUPP; - goto err_undo_flags; - } - } else { - /* The application is not using an ABI, which requires the - * slave interface to be open. - */ - if (!(slave_dev->flags & IFF_UP)) { - printk(KERN_ERR DRV_NAME - ": Error: %s is not running\n", - slave_dev->name); - res = -EINVAL; - goto err_undo_flags; - } + if (slave_dev->set_mac_address == NULL) { + printk(KERN_ERR DRV_NAME + ": Error: The slave device you specified does " + "not support setting the MAC address.\n"); + printk(KERN_ERR + "Your kernel likely does not support slave devices.\n"); - if ((bond->params.mode == BOND_MODE_8023AD) || - (bond->params.mode == BOND_MODE_TLB) || - (bond->params.mode == BOND_MODE_ALB)) { - printk(KERN_ERR DRV_NAME - ": Error: to use %s mode, you must upgrade " - "ifenslave.\n", - bond_mode_name(bond->params.mode)); - res = -EOPNOTSUPP; - goto err_undo_flags; - } + res = -EOPNOTSUPP; + goto err_undo_flags; } new_slave = kmalloc(sizeof(struct slave), GFP_KERNEL); @@ -1762,41 +1736,36 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de */ new_slave->original_flags = slave_dev->flags; - if (app_abi_ver >= 1) { - /* save slave's original ("permanent") mac address for - * modes that needs it, and for restoring it upon release, - * and then set it to the master's address - */ - memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN); + /* + * Save slave's original ("permanent") mac address for modes + * that need it, and for restoring it upon release, and then + * set it to the master's address + */ + memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN); - /* set slave to master's mac address - * The application already set the master's - * mac address to that of the first slave - */ - memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len); - addr.sa_family = slave_dev->type; - res = dev_set_mac_address(slave_dev, &addr); - if (res) { - dprintk("Error %d calling set_mac_address\n", res); - goto err_free; - } + /* + * Set slave to master's mac address. The application already + * set the master's mac address to that of the first slave + */ + memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len); + addr.sa_family = slave_dev->type; + res = dev_set_mac_address(slave_dev, &addr); + if (res) { + dprintk("Error %d calling set_mac_address\n", res); + goto err_free; + } - /* open the slave since the application closed it */ - res = dev_open(slave_dev); - if (res) { - dprintk("Openning slave %s failed\n", slave_dev->name); - goto err_restore_mac; - } + /* open the slave since the application closed it */ + res = dev_open(slave_dev); + if (res) { + dprintk("Openning slave %s failed\n", slave_dev->name); + goto err_restore_mac; } res = netdev_set_master(slave_dev, bond_dev); if (res) { dprintk("Error %d calling netdev_set_master\n", res); - if (app_abi_ver < 1) { - goto err_free; - } else { - goto err_close; - } + goto err_close; } new_slave->dev = slave_dev; @@ -1997,39 +1966,6 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de write_unlock_bh(&bond->lock); - if (app_abi_ver < 1) { - /* - * !!! This is to support old versions of ifenslave. - * We can remove this in 2.5 because our ifenslave takes - * care of this for us. - * We check to see if the master has a mac address yet. - * If not, we'll give it the mac address of our slave device. - */ - int ndx = 0; - - for (ndx = 0; ndx < bond_dev->addr_len; ndx++) { - dprintk("Checking ndx=%d of bond_dev->dev_addr\n", - ndx); - if (bond_dev->dev_addr[ndx] != 0) { - dprintk("Found non-zero byte at ndx=%d\n", - ndx); - break; - } - } - - if (ndx == bond_dev->addr_len) { - /* - * We got all the way through the address and it was - * all 0's. - */ - dprintk("%s doesn't have a MAC address yet. \n", - bond_dev->name); - dprintk("Going to give assign it from %s.\n", - slave_dev->name); - bond_sethwaddr(bond_dev, slave_dev); - } - } - printk(KERN_INFO DRV_NAME ": %s: enslaving %s as a%s interface with a%s link.\n", bond_dev->name, slave_dev->name, @@ -2227,12 +2163,10 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de /* close slave before restoring its mac address */ dev_close(slave_dev); - if (app_abi_ver >= 1) { - /* restore original ("permanent") mac address */ - memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); - addr.sa_family = slave_dev->type; - dev_set_mac_address(slave_dev, &addr); - } + /* restore original ("permanent") mac address */ + memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); + addr.sa_family = slave_dev->type; + dev_set_mac_address(slave_dev, &addr); /* restore the original state of the * IFF_NOARP flag that might have been @@ -2320,12 +2254,10 @@ static int bond_release_all(struct net_device *bond_dev) /* close slave before restoring its mac address */ dev_close(slave_dev); - if (app_abi_ver >= 1) { - /* restore original ("permanent") mac address*/ - memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); - addr.sa_family = slave_dev->type; - dev_set_mac_address(slave_dev, &addr); - } + /* restore original ("permanent") mac address*/ + memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); + addr.sa_family = slave_dev->type; + dev_set_mac_address(slave_dev, &addr); /* restore the original state of the IFF_NOARP flag that might have * been set by bond_set_slave_inactive_flags() @@ -2423,57 +2355,6 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi return res; } -static int bond_ethtool_ioctl(struct net_device *bond_dev, struct ifreq *ifr) -{ - struct ethtool_drvinfo info; - void __user *addr = ifr->ifr_data; - uint32_t cmd; - - if (get_user(cmd, (uint32_t __user *)addr)) { - return -EFAULT; - } - - switch (cmd) { - case ETHTOOL_GDRVINFO: - if (copy_from_user(&info, addr, sizeof(info))) { - return -EFAULT; - } - - if (strcmp(info.driver, "ifenslave") == 0) { - int new_abi_ver; - char *endptr; - - new_abi_ver = simple_strtoul(info.fw_version, - &endptr, 0); - if (*endptr) { - printk(KERN_ERR DRV_NAME - ": Error: got invalid ABI " - "version from application\n"); - - return -EINVAL; - } - - if (orig_app_abi_ver == -1) { - orig_app_abi_ver = new_abi_ver; - } - - app_abi_ver = new_abi_ver; - } - - strncpy(info.driver, DRV_NAME, 32); - strncpy(info.version, DRV_VERSION, 32); - snprintf(info.fw_version, 32, "%d", BOND_ABI_VERSION); - - if (copy_to_user(addr, &info, sizeof(info))) { - return -EFAULT; - } - - return 0; - default: - return -EOPNOTSUPP; - } -} - static int bond_info_query(struct net_device *bond_dev, struct ifbond *info) { struct bonding *bond = bond_dev->priv; @@ -2776,7 +2657,7 @@ static u32 bond_glean_dev_ip(struct net_device *dev) return 0; rcu_read_lock(); - idev = __in_dev_get(dev); + idev = __in_dev_get_rcu(dev); if (!idev) goto out; @@ -3442,16 +3323,11 @@ static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave seq_printf(seq, "Link Failure Count: %d\n", slave->link_failure_count); - if (app_abi_ver >= 1) { - seq_printf(seq, - "Permanent HW addr: %02x:%02x:%02x:%02x:%02x:%02x\n", - slave->perm_hwaddr[0], - slave->perm_hwaddr[1], - slave->perm_hwaddr[2], - slave->perm_hwaddr[3], - slave->perm_hwaddr[4], - slave->perm_hwaddr[5]); - } + seq_printf(seq, + "Permanent HW addr: %02x:%02x:%02x:%02x:%02x:%02x\n", + slave->perm_hwaddr[0], slave->perm_hwaddr[1], + slave->perm_hwaddr[2], slave->perm_hwaddr[3], + slave->perm_hwaddr[4], slave->perm_hwaddr[5]); if (bond->params.mode == BOND_MODE_8023AD) { const struct aggregator *agg @@ -4010,15 +3886,12 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd struct ifslave k_sinfo; struct ifslave __user *u_sinfo = NULL; struct mii_ioctl_data *mii = NULL; - int prev_abi_ver = orig_app_abi_ver; int res = 0; dprintk("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd); switch (cmd) { - case SIOCETHTOOL: - return bond_ethtool_ioctl(bond_dev, ifr); case SIOCGMIIPHY: mii = if_mii(ifr); if (!mii) { @@ -4090,21 +3963,6 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd return -EPERM; } - if (orig_app_abi_ver == -1) { - /* no orig_app_abi_ver was provided yet, so we'll use the - * current one from now on, even if it's 0 - */ - orig_app_abi_ver = app_abi_ver; - - } else if (orig_app_abi_ver != app_abi_ver) { - printk(KERN_ERR DRV_NAME - ": Error: already using ifenslave ABI version %d; to " - "upgrade ifenslave to version %d, you must first " - "reload bonding.\n", - orig_app_abi_ver, app_abi_ver); - return -EINVAL; - } - slave_dev = dev_get_by_name(ifr->ifr_slave); dprintk("slave_dev=%p: \n", slave_dev); @@ -4137,14 +3995,6 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd dev_put(slave_dev); } - if (res < 0) { - /* The ioctl failed, so there's no point in changing the - * orig_app_abi_ver. We'll restore it's value just in case - * we've changed it earlier in this function. - */ - orig_app_abi_ver = prev_abi_ver; - } - return res; } @@ -4578,9 +4428,18 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode) } } +static void bond_ethtool_get_drvinfo(struct net_device *bond_dev, + struct ethtool_drvinfo *drvinfo) +{ + strncpy(drvinfo->driver, DRV_NAME, 32); + strncpy(drvinfo->version, DRV_VERSION, 32); + snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION); +} + static struct ethtool_ops bond_ethtool_ops = { .get_tx_csum = ethtool_op_get_tx_csum, .get_sg = ethtool_op_get_sg, + .get_drvinfo = bond_ethtool_get_drvinfo, }; /* diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 38819698086..bbf9da8af62 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -40,8 +40,8 @@ #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "2.6.3" -#define DRV_RELDATE "June 8, 2005" +#define DRV_VERSION "2.6.4" +#define DRV_RELDATE "September 26, 2005" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c new file mode 100644 index 00000000000..2e617424d3f --- /dev/null +++ b/drivers/net/cassini.c @@ -0,0 +1,5237 @@ +/* cassini.c: Sun Microsystems Cassini(+) ethernet driver. + * + * Copyright (C) 2004 Sun Microsystems Inc. + * Copyright (C) 2003 Adrian Sun (asun@darksunrising.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + * This driver uses the sungem driver (c) David Miller + * (davem@redhat.com) as its basis. + * + * The cassini chip has a number of features that distinguish it from + * the gem chip: + * 4 transmit descriptor rings that are used for either QoS (VLAN) or + * load balancing (non-VLAN mode) + * batching of multiple packets + * multiple CPU dispatching + * page-based RX descriptor engine with separate completion rings + * Gigabit support (GMII and PCS interface) + * MIF link up/down detection works + * + * RX is handled by page sized buffers that are attached as fragments to + * the skb. here's what's done: + * -- driver allocates pages at a time and keeps reference counts + * on them. + * -- the upper protocol layers assume that the header is in the skb + * itself. as a result, cassini will copy a small amount (64 bytes) + * to make them happy. + * -- driver appends the rest of the data pages as frags to skbuffs + * and increments the reference count + * -- on page reclamation, the driver swaps the page with a spare page. + * if that page is still in use, it frees its reference to that page, + * and allocates a new page for use. otherwise, it just recycles the + * the page. + * + * NOTE: cassini can parse the header. however, it's not worth it + * as long as the network stack requires a header copy. + * + * TX has 4 queues. currently these queues are used in a round-robin + * fashion for load balancing. They can also be used for QoS. for that + * to work, however, QoS information needs to be exposed down to the driver + * level so that subqueues get targetted to particular transmit rings. + * alternatively, the queues can be configured via use of the all-purpose + * ioctl. + * + * RX DATA: the rx completion ring has all the info, but the rx desc + * ring has all of the data. RX can conceivably come in under multiple + * interrupts, but the INT# assignment needs to be set up properly by + * the BIOS and conveyed to the driver. PCI BIOSes don't know how to do + * that. also, the two descriptor rings are designed to distinguish between + * encrypted and non-encrypted packets, but we use them for buffering + * instead. + * + * by default, the selective clear mask is set up to process rx packets. + */ + +#include <linux/config.h> +#include <linux/version.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/mm.h> +#include <linux/highmem.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/crc32.h> +#include <linux/random.h> +#include <linux/mii.h> +#include <linux/ip.h> +#include <linux/tcp.h> + +#include <net/checksum.h> + +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + +#define cas_page_map(x) kmap_atomic((x), KM_SKB_DATA_SOFTIRQ) +#define cas_page_unmap(x) kunmap_atomic((x), KM_SKB_DATA_SOFTIRQ) +#define CAS_NCPUS num_online_cpus() + +#if defined(CONFIG_CASSINI_NAPI) && defined(HAVE_NETDEV_POLL) +#define USE_NAPI +#define cas_skb_release(x) netif_receive_skb(x) +#else +#define cas_skb_release(x) netif_rx(x) +#endif + +/* select which firmware to use */ +#define USE_HP_WORKAROUND +#define HP_WORKAROUND_DEFAULT /* select which firmware to use as default */ +#define CAS_HP_ALT_FIRMWARE cas_prog_null /* alternate firmware */ + +#include "cassini.h" + +#define USE_TX_COMPWB /* use completion writeback registers */ +#define USE_CSMA_CD_PROTO /* standard CSMA/CD */ +#define USE_RX_BLANK /* hw interrupt mitigation */ +#undef USE_ENTROPY_DEV /* don't test for entropy device */ + +/* NOTE: these aren't useable unless PCI interrupts can be assigned. + * also, we need to make cp->lock finer-grained. + */ +#undef USE_PCI_INTB +#undef USE_PCI_INTC +#undef USE_PCI_INTD +#undef USE_QOS + +#undef USE_VPD_DEBUG /* debug vpd information if defined */ + +/* rx processing options */ +#define USE_PAGE_ORDER /* specify to allocate large rx pages */ +#define RX_DONT_BATCH 0 /* if 1, don't batch flows */ +#define RX_COPY_ALWAYS 0 /* if 0, use frags */ +#define RX_COPY_MIN 64 /* copy a little to make upper layers happy */ +#undef RX_COUNT_BUFFERS /* define to calculate RX buffer stats */ + +#define DRV_MODULE_NAME "cassini" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.4" +#define DRV_MODULE_RELDATE "1 July 2004" + +#define CAS_DEF_MSG_ENABLE \ + (NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | \ + NETIF_MSG_IFDOWN | \ + NETIF_MSG_IFUP | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) + +/* length of time before we decide the hardware is borked, + * and dev->tx_timeout() should be called to fix the problem + */ +#define CAS_TX_TIMEOUT (HZ) +#define CAS_LINK_TIMEOUT (22*HZ/10) +#define CAS_LINK_FAST_TIMEOUT (1) + +/* timeout values for state changing. these specify the number + * of 10us delays to be used before giving up. + */ +#define STOP_TRIES_PHY 1000 +#define STOP_TRIES 5000 + +/* specify a minimum frame size to deal with some fifo issues + * max mtu == 2 * page size - ethernet header - 64 - swivel = + * 2 * page_size - 0x50 + */ +#define CAS_MIN_FRAME 97 +#define CAS_1000MB_MIN_FRAME 255 +#define CAS_MIN_MTU 60 +#define CAS_MAX_MTU min(((cp->page_size << 1) - 0x50), 9000) + +#if 1 +/* + * Eliminate these and use separate atomic counters for each, to + * avoid a race condition. + */ +#else +#define CAS_RESET_MTU 1 +#define CAS_RESET_ALL 2 +#define CAS_RESET_SPARE 3 +#endif + +static char version[] __devinitdata = + DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Adrian Sun (asun@darksunrising.com)"); +MODULE_DESCRIPTION("Sun Cassini(+) ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_PARM(cassini_debug, "i"); +MODULE_PARM_DESC(cassini_debug, "Cassini bitmapped debugging message enable value"); +MODULE_PARM(link_mode, "i"); +MODULE_PARM_DESC(link_mode, "default link mode"); + +/* + * Work around for a PCS bug in which the link goes down due to the chip + * being confused and never showing a link status of "up." + */ +#define DEFAULT_LINKDOWN_TIMEOUT 5 +/* + * Value in seconds, for user input. + */ +static int linkdown_timeout = DEFAULT_LINKDOWN_TIMEOUT; +MODULE_PARM(linkdown_timeout, "i"); +MODULE_PARM_DESC(linkdown_timeout, +"min reset interval in sec. for PCS linkdown issue; disabled if not positive"); + +/* + * value in 'ticks' (units used by jiffies). Set when we init the + * module because 'HZ' in actually a function call on some flavors of + * Linux. This will default to DEFAULT_LINKDOWN_TIMEOUT * HZ. + */ +static int link_transition_timeout; + + +static int cassini_debug = -1; /* -1 == use CAS_DEF_MSG_ENABLE as value */ +static int link_mode; + +static u16 link_modes[] __devinitdata = { + BMCR_ANENABLE, /* 0 : autoneg */ + 0, /* 1 : 10bt half duplex */ + BMCR_SPEED100, /* 2 : 100bt half duplex */ + BMCR_FULLDPLX, /* 3 : 10bt full duplex */ + BMCR_SPEED100|BMCR_FULLDPLX, /* 4 : 100bt full duplex */ + CAS_BMCR_SPEED1000|BMCR_FULLDPLX /* 5 : 1000bt full duplex */ +}; + +static struct pci_device_id cas_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_CASSINI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SATURN, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, cas_pci_tbl); + +static void cas_set_link_modes(struct cas *cp); + +static inline void cas_lock_tx(struct cas *cp) +{ + int i; + + for (i = 0; i < N_TX_RINGS; i++) + spin_lock(&cp->tx_lock[i]); +} + +static inline void cas_lock_all(struct cas *cp) +{ + spin_lock_irq(&cp->lock); + cas_lock_tx(cp); +} + +/* WTZ: QA was finding deadlock problems with the previous + * versions after long test runs with multiple cards per machine. + * See if replacing cas_lock_all with safer versions helps. The + * symptoms QA is reporting match those we'd expect if interrupts + * aren't being properly restored, and we fixed a previous deadlock + * with similar symptoms by using save/restore versions in other + * places. + */ +#define cas_lock_all_save(cp, flags) \ +do { \ + struct cas *xxxcp = (cp); \ + spin_lock_irqsave(&xxxcp->lock, flags); \ + cas_lock_tx(xxxcp); \ +} while (0) + +static inline void cas_unlock_tx(struct cas *cp) +{ + int i; + + for (i = N_TX_RINGS; i > 0; i--) + spin_unlock(&cp->tx_lock[i - 1]); +} + +static inline void cas_unlock_all(struct cas *cp) +{ + cas_unlock_tx(cp); + spin_unlock_irq(&cp->lock); +} + +#define cas_unlock_all_restore(cp, flags) \ +do { \ + struct cas *xxxcp = (cp); \ + cas_unlock_tx(xxxcp); \ + spin_unlock_irqrestore(&xxxcp->lock, flags); \ +} while (0) + +static void cas_disable_irq(struct cas *cp, const int ring) +{ + /* Make sure we won't get any more interrupts */ + if (ring == 0) { + writel(0xFFFFFFFF, cp->regs + REG_INTR_MASK); + return; + } + + /* disable completion interrupts and selectively mask */ + if (cp->cas_flags & CAS_FLAG_REG_PLUS) { + switch (ring) { +#if defined (USE_PCI_INTB) || defined(USE_PCI_INTC) || defined(USE_PCI_INTD) +#ifdef USE_PCI_INTB + case 1: +#endif +#ifdef USE_PCI_INTC + case 2: +#endif +#ifdef USE_PCI_INTD + case 3: +#endif + writel(INTRN_MASK_CLEAR_ALL | INTRN_MASK_RX_EN, + cp->regs + REG_PLUS_INTRN_MASK(ring)); + break; +#endif + default: + writel(INTRN_MASK_CLEAR_ALL, cp->regs + + REG_PLUS_INTRN_MASK(ring)); + break; + } + } +} + +static inline void cas_mask_intr(struct cas *cp) +{ + int i; + + for (i = 0; i < N_RX_COMP_RINGS; i++) + cas_disable_irq(cp, i); +} + +static void cas_enable_irq(struct cas *cp, const int ring) +{ + if (ring == 0) { /* all but TX_DONE */ + writel(INTR_TX_DONE, cp->regs + REG_INTR_MASK); + return; + } + + if (cp->cas_flags & CAS_FLAG_REG_PLUS) { + switch (ring) { +#if defined (USE_PCI_INTB) || defined(USE_PCI_INTC) || defined(USE_PCI_INTD) +#ifdef USE_PCI_INTB + case 1: +#endif +#ifdef USE_PCI_INTC + case 2: +#endif +#ifdef USE_PCI_INTD + case 3: +#endif + writel(INTRN_MASK_RX_EN, cp->regs + + REG_PLUS_INTRN_MASK(ring)); + break; +#endif + default: + break; + } + } +} + +static inline void cas_unmask_intr(struct cas *cp) +{ + int i; + + for (i = 0; i < N_RX_COMP_RINGS; i++) + cas_enable_irq(cp, i); +} + +static inline void cas_entropy_gather(struct cas *cp) +{ +#ifdef USE_ENTROPY_DEV + if ((cp->cas_flags & CAS_FLAG_ENTROPY_DEV) == 0) + return; + + batch_entropy_store(readl(cp->regs + REG_ENTROPY_IV), + readl(cp->regs + REG_ENTROPY_IV), + sizeof(uint64_t)*8); +#endif +} + +static inline void cas_entropy_reset(struct cas *cp) +{ +#ifdef USE_ENTROPY_DEV + if ((cp->cas_flags & CAS_FLAG_ENTROPY_DEV) == 0) + return; + + writel(BIM_LOCAL_DEV_PAD | BIM_LOCAL_DEV_PROM | BIM_LOCAL_DEV_EXT, + cp->regs + REG_BIM_LOCAL_DEV_EN); + writeb(ENTROPY_RESET_STC_MODE, cp->regs + REG_ENTROPY_RESET); + writeb(0x55, cp->regs + REG_ENTROPY_RAND_REG); + + /* if we read back 0x0, we don't have an entropy device */ + if (readb(cp->regs + REG_ENTROPY_RAND_REG) == 0) + cp->cas_flags &= ~CAS_FLAG_ENTROPY_DEV; +#endif +} + +/* access to the phy. the following assumes that we've initialized the MIF to + * be in frame rather than bit-bang mode + */ +static u16 cas_phy_read(struct cas *cp, int reg) +{ + u32 cmd; + int limit = STOP_TRIES_PHY; + + cmd = MIF_FRAME_ST | MIF_FRAME_OP_READ; + cmd |= CAS_BASE(MIF_FRAME_PHY_ADDR, cp->phy_addr); + cmd |= CAS_BASE(MIF_FRAME_REG_ADDR, reg); + cmd |= MIF_FRAME_TURN_AROUND_MSB; + writel(cmd, cp->regs + REG_MIF_FRAME); + + /* poll for completion */ + while (limit-- > 0) { + udelay(10); + cmd = readl(cp->regs + REG_MIF_FRAME); + if (cmd & MIF_FRAME_TURN_AROUND_LSB) + return (cmd & MIF_FRAME_DATA_MASK); + } + return 0xFFFF; /* -1 */ +} + +static int cas_phy_write(struct cas *cp, int reg, u16 val) +{ + int limit = STOP_TRIES_PHY; + u32 cmd; + + cmd = MIF_FRAME_ST | MIF_FRAME_OP_WRITE; + cmd |= CAS_BASE(MIF_FRAME_PHY_ADDR, cp->phy_addr); + cmd |= CAS_BASE(MIF_FRAME_REG_ADDR, reg); + cmd |= MIF_FRAME_TURN_AROUND_MSB; + cmd |= val & MIF_FRAME_DATA_MASK; + writel(cmd, cp->regs + REG_MIF_FRAME); + + /* poll for completion */ + while (limit-- > 0) { + udelay(10); + cmd = readl(cp->regs + REG_MIF_FRAME); + if (cmd & MIF_FRAME_TURN_AROUND_LSB) + return 0; + } + return -1; +} + +static void cas_phy_powerup(struct cas *cp) +{ + u16 ctl = cas_phy_read(cp, MII_BMCR); + + if ((ctl & BMCR_PDOWN) == 0) + return; + ctl &= ~BMCR_PDOWN; + cas_phy_write(cp, MII_BMCR, ctl); +} + +static void cas_phy_powerdown(struct cas *cp) +{ + u16 ctl = cas_phy_read(cp, MII_BMCR); + + if (ctl & BMCR_PDOWN) + return; + ctl |= BMCR_PDOWN; + cas_phy_write(cp, MII_BMCR, ctl); +} + +/* cp->lock held. note: the last put_page will free the buffer */ +static int cas_page_free(struct cas *cp, cas_page_t *page) +{ + pci_unmap_page(cp->pdev, page->dma_addr, cp->page_size, + PCI_DMA_FROMDEVICE); + __free_pages(page->buffer, cp->page_order); + kfree(page); + return 0; +} + +#ifdef RX_COUNT_BUFFERS +#define RX_USED_ADD(x, y) ((x)->used += (y)) +#define RX_USED_SET(x, y) ((x)->used = (y)) +#else +#define RX_USED_ADD(x, y) +#define RX_USED_SET(x, y) +#endif + +/* local page allocation routines for the receive buffers. jumbo pages + * require at least 8K contiguous and 8K aligned buffers. + */ +static cas_page_t *cas_page_alloc(struct cas *cp, const int flags) +{ + cas_page_t *page; + + page = kmalloc(sizeof(cas_page_t), flags); + if (!page) + return NULL; + + INIT_LIST_HEAD(&page->list); + RX_USED_SET(page, 0); + page->buffer = alloc_pages(flags, cp->page_order); + if (!page->buffer) + goto page_err; + page->dma_addr = pci_map_page(cp->pdev, page->buffer, 0, + cp->page_size, PCI_DMA_FROMDEVICE); + return page; + +page_err: + kfree(page); + return NULL; +} + +/* initialize spare pool of rx buffers, but allocate during the open */ +static void cas_spare_init(struct cas *cp) +{ + spin_lock(&cp->rx_inuse_lock); + INIT_LIST_HEAD(&cp->rx_inuse_list); + spin_unlock(&cp->rx_inuse_lock); + + spin_lock(&cp->rx_spare_lock); + INIT_LIST_HEAD(&cp->rx_spare_list); + cp->rx_spares_needed = RX_SPARE_COUNT; + spin_unlock(&cp->rx_spare_lock); +} + +/* used on close. free all the spare buffers. */ +static void cas_spare_free(struct cas *cp) +{ + struct list_head list, *elem, *tmp; + + /* free spare buffers */ + INIT_LIST_HEAD(&list); + spin_lock(&cp->rx_spare_lock); + list_splice(&cp->rx_spare_list, &list); + INIT_LIST_HEAD(&cp->rx_spare_list); + spin_unlock(&cp->rx_spare_lock); + list_for_each_safe(elem, tmp, &list) { + cas_page_free(cp, list_entry(elem, cas_page_t, list)); + } + + INIT_LIST_HEAD(&list); +#if 1 + /* + * Looks like Adrian had protected this with a different + * lock than used everywhere else to manipulate this list. + */ + spin_lock(&cp->rx_inuse_lock); + list_splice(&cp->rx_inuse_list, &list); + INIT_LIST_HEAD(&cp->rx_inuse_list); + spin_unlock(&cp->rx_inuse_lock); +#else + spin_lock(&cp->rx_spare_lock); + list_splice(&cp->rx_inuse_list, &list); + INIT_LIST_HEAD(&cp->rx_inuse_list); + spin_unlock(&cp->rx_spare_lock); +#endif + list_for_each_safe(elem, tmp, &list) { + cas_page_free(cp, list_entry(elem, cas_page_t, list)); + } +} + +/* replenish spares if needed */ +static void cas_spare_recover(struct cas *cp, const int flags) +{ + struct list_head list, *elem, *tmp; + int needed, i; + + /* check inuse list. if we don't need any more free buffers, + * just free it + */ + + /* make a local copy of the list */ + INIT_LIST_HEAD(&list); + spin_lock(&cp->rx_inuse_lock); + list_splice(&cp->rx_inuse_list, &list); + INIT_LIST_HEAD(&cp->rx_inuse_list); + spin_unlock(&cp->rx_inuse_lock); + + list_for_each_safe(elem, tmp, &list) { + cas_page_t *page = list_entry(elem, cas_page_t, list); + + if (page_count(page->buffer) > 1) + continue; + + list_del(elem); + spin_lock(&cp->rx_spare_lock); + if (cp->rx_spares_needed > 0) { + list_add(elem, &cp->rx_spare_list); + cp->rx_spares_needed--; + spin_unlock(&cp->rx_spare_lock); + } else { + spin_unlock(&cp->rx_spare_lock); + cas_page_free(cp, page); + } + } + + /* put any inuse buffers back on the list */ + if (!list_empty(&list)) { + spin_lock(&cp->rx_inuse_lock); + list_splice(&list, &cp->rx_inuse_list); + spin_unlock(&cp->rx_inuse_lock); + } + + spin_lock(&cp->rx_spare_lock); + needed = cp->rx_spares_needed; + spin_unlock(&cp->rx_spare_lock); + if (!needed) + return; + + /* we still need spares, so try to allocate some */ + INIT_LIST_HEAD(&list); + i = 0; + while (i < needed) { + cas_page_t *spare = cas_page_alloc(cp, flags); + if (!spare) + break; + list_add(&spare->list, &list); + i++; + } + + spin_lock(&cp->rx_spare_lock); + list_splice(&list, &cp->rx_spare_list); + cp->rx_spares_needed -= i; + spin_unlock(&cp->rx_spare_lock); +} + +/* pull a page from the list. */ +static cas_page_t *cas_page_dequeue(struct cas *cp) +{ + struct list_head *entry; + int recover; + + spin_lock(&cp->rx_spare_lock); + if (list_empty(&cp->rx_spare_list)) { + /* try to do a quick recovery */ + spin_unlock(&cp->rx_spare_lock); + cas_spare_recover(cp, GFP_ATOMIC); + spin_lock(&cp->rx_spare_lock); + if (list_empty(&cp->rx_spare_list)) { + if (netif_msg_rx_err(cp)) + printk(KERN_ERR "%s: no spare buffers " + "available.\n", cp->dev->name); + spin_unlock(&cp->rx_spare_lock); + return NULL; + } + } + + entry = cp->rx_spare_list.next; + list_del(entry); + recover = ++cp->rx_spares_needed; + spin_unlock(&cp->rx_spare_lock); + + /* trigger the timer to do the recovery */ + if ((recover & (RX_SPARE_RECOVER_VAL - 1)) == 0) { +#if 1 + atomic_inc(&cp->reset_task_pending); + atomic_inc(&cp->reset_task_pending_spare); + schedule_work(&cp->reset_task); +#else + atomic_set(&cp->reset_task_pending, CAS_RESET_SPARE); + schedule_work(&cp->reset_task); +#endif + } + return list_entry(entry, cas_page_t, list); +} + + +static void cas_mif_poll(struct cas *cp, const int enable) +{ + u32 cfg; + + cfg = readl(cp->regs + REG_MIF_CFG); + cfg &= (MIF_CFG_MDIO_0 | MIF_CFG_MDIO_1); + + if (cp->phy_type & CAS_PHY_MII_MDIO1) + cfg |= MIF_CFG_PHY_SELECT; + + /* poll and interrupt on link status change. */ + if (enable) { + cfg |= MIF_CFG_POLL_EN; + cfg |= CAS_BASE(MIF_CFG_POLL_REG, MII_BMSR); + cfg |= CAS_BASE(MIF_CFG_POLL_PHY, cp->phy_addr); + } + writel((enable) ? ~(BMSR_LSTATUS | BMSR_ANEGCOMPLETE) : 0xFFFF, + cp->regs + REG_MIF_MASK); + writel(cfg, cp->regs + REG_MIF_CFG); +} + +/* Must be invoked under cp->lock */ +static void cas_begin_auto_negotiation(struct cas *cp, struct ethtool_cmd *ep) +{ + u16 ctl; +#if 1 + int lcntl; + int changed = 0; + int oldstate = cp->lstate; + int link_was_not_down = !(oldstate == link_down); +#endif + /* Setup link parameters */ + if (!ep) + goto start_aneg; + lcntl = cp->link_cntl; + if (ep->autoneg == AUTONEG_ENABLE) + cp->link_cntl = BMCR_ANENABLE; + else { + cp->link_cntl = 0; + if (ep->speed == SPEED_100) + cp->link_cntl |= BMCR_SPEED100; + else if (ep->speed == SPEED_1000) + cp->link_cntl |= CAS_BMCR_SPEED1000; + if (ep->duplex == DUPLEX_FULL) + cp->link_cntl |= BMCR_FULLDPLX; + } +#if 1 + changed = (lcntl != cp->link_cntl); +#endif +start_aneg: + if (cp->lstate == link_up) { + printk(KERN_INFO "%s: PCS link down.\n", + cp->dev->name); + } else { + if (changed) { + printk(KERN_INFO "%s: link configuration changed\n", + cp->dev->name); + } + } + cp->lstate = link_down; + cp->link_transition = LINK_TRANSITION_LINK_DOWN; + if (!cp->hw_running) + return; +#if 1 + /* + * WTZ: If the old state was link_up, we turn off the carrier + * to replicate everything we do elsewhere on a link-down + * event when we were already in a link-up state.. + */ + if (oldstate == link_up) + netif_carrier_off(cp->dev); + if (changed && link_was_not_down) { + /* + * WTZ: This branch will simply schedule a full reset after + * we explicitly changed link modes in an ioctl. See if this + * fixes the link-problems we were having for forced mode. + */ + atomic_inc(&cp->reset_task_pending); + atomic_inc(&cp->reset_task_pending_all); + schedule_work(&cp->reset_task); + cp->timer_ticks = 0; + mod_timer(&cp->link_timer, jiffies + CAS_LINK_TIMEOUT); + return; + } +#endif + if (cp->phy_type & CAS_PHY_SERDES) { + u32 val = readl(cp->regs + REG_PCS_MII_CTRL); + + if (cp->link_cntl & BMCR_ANENABLE) { + val |= (PCS_MII_RESTART_AUTONEG | PCS_MII_AUTONEG_EN); + cp->lstate = link_aneg; + } else { + if (cp->link_cntl & BMCR_FULLDPLX) + val |= PCS_MII_CTRL_DUPLEX; + val &= ~PCS_MII_AUTONEG_EN; + cp->lstate = link_force_ok; + } + cp->link_transition = LINK_TRANSITION_LINK_CONFIG; + writel(val, cp->regs + REG_PCS_MII_CTRL); + + } else { + cas_mif_poll(cp, 0); + ctl = cas_phy_read(cp, MII_BMCR); + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | + CAS_BMCR_SPEED1000 | BMCR_ANENABLE); + ctl |= cp->link_cntl; + if (ctl & BMCR_ANENABLE) { + ctl |= BMCR_ANRESTART; + cp->lstate = link_aneg; + } else { + cp->lstate = link_force_ok; + } + cp->link_transition = LINK_TRANSITION_LINK_CONFIG; + cas_phy_write(cp, MII_BMCR, ctl); + cas_mif_poll(cp, 1); + } + + cp->timer_ticks = 0; + mod_timer(&cp->link_timer, jiffies + CAS_LINK_TIMEOUT); +} + +/* Must be invoked under cp->lock. */ +static int cas_reset_mii_phy(struct cas *cp) +{ + int limit = STOP_TRIES_PHY; + u16 val; + + cas_phy_write(cp, MII_BMCR, BMCR_RESET); + udelay(100); + while (limit--) { + val = cas_phy_read(cp, MII_BMCR); + if ((val & BMCR_RESET) == 0) + break; + udelay(10); + } + return (limit <= 0); +} + +static void cas_saturn_firmware_load(struct cas *cp) +{ + cas_saturn_patch_t *patch = cas_saturn_patch; + + cas_phy_powerdown(cp); + + /* expanded memory access mode */ + cas_phy_write(cp, DP83065_MII_MEM, 0x0); + + /* pointer configuration for new firmware */ + cas_phy_write(cp, DP83065_MII_REGE, 0x8ff9); + cas_phy_write(cp, DP83065_MII_REGD, 0xbd); + cas_phy_write(cp, DP83065_MII_REGE, 0x8ffa); + cas_phy_write(cp, DP83065_MII_REGD, 0x82); + cas_phy_write(cp, DP83065_MII_REGE, 0x8ffb); + cas_phy_write(cp, DP83065_MII_REGD, 0x0); + cas_phy_write(cp, DP83065_MII_REGE, 0x8ffc); + cas_phy_write(cp, DP83065_MII_REGD, 0x39); + + /* download new firmware */ + cas_phy_write(cp, DP83065_MII_MEM, 0x1); + cas_phy_write(cp, DP83065_MII_REGE, patch->addr); + while (patch->addr) { + cas_phy_write(cp, DP83065_MII_REGD, patch->val); + patch++; + } + + /* enable firmware */ + cas_phy_write(cp, DP83065_MII_REGE, 0x8ff8); + cas_phy_write(cp, DP83065_MII_REGD, 0x1); +} + + +/* phy initialization */ +static void cas_phy_init(struct cas *cp) +{ + u16 val; + + /* if we're in MII/GMII mode, set up phy */ + if (CAS_PHY_MII(cp->phy_type)) { + writel(PCS_DATAPATH_MODE_MII, + cp->regs + REG_PCS_DATAPATH_MODE); + + cas_mif_poll(cp, 0); + cas_reset_mii_phy(cp); /* take out of isolate mode */ + + if (PHY_LUCENT_B0 == cp->phy_id) { + /* workaround link up/down issue with lucent */ + cas_phy_write(cp, LUCENT_MII_REG, 0x8000); + cas_phy_write(cp, MII_BMCR, 0x00f1); + cas_phy_write(cp, LUCENT_MII_REG, 0x0); + + } else if (PHY_BROADCOM_B0 == (cp->phy_id & 0xFFFFFFFC)) { + /* workarounds for broadcom phy */ + cas_phy_write(cp, BROADCOM_MII_REG8, 0x0C20); + cas_phy_write(cp, BROADCOM_MII_REG7, 0x0012); + cas_phy_write(cp, BROADCOM_MII_REG5, 0x1804); + cas_phy_write(cp, BROADCOM_MII_REG7, 0x0013); + cas_phy_write(cp, BROADCOM_MII_REG5, 0x1204); + cas_phy_write(cp, BROADCOM_MII_REG7, 0x8006); + cas_phy_write(cp, BROADCOM_MII_REG5, 0x0132); + cas_phy_write(cp, BROADCOM_MII_REG7, 0x8006); + cas_phy_write(cp, BROADCOM_MII_REG5, 0x0232); + cas_phy_write(cp, BROADCOM_MII_REG7, 0x201F); + cas_phy_write(cp, BROADCOM_MII_REG5, 0x0A20); + + } else if (PHY_BROADCOM_5411 == cp->phy_id) { + val = cas_phy_read(cp, BROADCOM_MII_REG4); + val = cas_phy_read(cp, BROADCOM_MII_REG4); + if (val & 0x0080) { + /* link workaround */ + cas_phy_write(cp, BROADCOM_MII_REG4, + val & ~0x0080); + } + + } else if (cp->cas_flags & CAS_FLAG_SATURN) { + writel((cp->phy_type & CAS_PHY_MII_MDIO0) ? + SATURN_PCFG_FSI : 0x0, + cp->regs + REG_SATURN_PCFG); + + /* load firmware to address 10Mbps auto-negotiation + * issue. NOTE: this will need to be changed if the + * default firmware gets fixed. + */ + if (PHY_NS_DP83065 == cp->phy_id) { + cas_saturn_firmware_load(cp); + } + cas_phy_powerup(cp); + } + + /* advertise capabilities */ + val = cas_phy_read(cp, MII_BMCR); + val &= ~BMCR_ANENABLE; + cas_phy_write(cp, MII_BMCR, val); + udelay(10); + + cas_phy_write(cp, MII_ADVERTISE, + cas_phy_read(cp, MII_ADVERTISE) | + (ADVERTISE_10HALF | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_100FULL | + CAS_ADVERTISE_PAUSE | + CAS_ADVERTISE_ASYM_PAUSE)); + + if (cp->cas_flags & CAS_FLAG_1000MB_CAP) { + /* make sure that we don't advertise half + * duplex to avoid a chip issue + */ + val = cas_phy_read(cp, CAS_MII_1000_CTRL); + val &= ~CAS_ADVERTISE_1000HALF; + val |= CAS_ADVERTISE_1000FULL; + cas_phy_write(cp, CAS_MII_1000_CTRL, val); + } + + } else { + /* reset pcs for serdes */ + u32 val; + int limit; + + writel(PCS_DATAPATH_MODE_SERDES, + cp->regs + REG_PCS_DATAPATH_MODE); + + /* enable serdes pins on saturn */ + if (cp->cas_flags & CAS_FLAG_SATURN) + writel(0, cp->regs + REG_SATURN_PCFG); + + /* Reset PCS unit. */ + val = readl(cp->regs + REG_PCS_MII_CTRL); + val |= PCS_MII_RESET; + writel(val, cp->regs + REG_PCS_MII_CTRL); + + limit = STOP_TRIES; + while (limit-- > 0) { + udelay(10); + if ((readl(cp->regs + REG_PCS_MII_CTRL) & + PCS_MII_RESET) == 0) + break; + } + if (limit <= 0) + printk(KERN_WARNING "%s: PCS reset bit would not " + "clear [%08x].\n", cp->dev->name, + readl(cp->regs + REG_PCS_STATE_MACHINE)); + + /* Make sure PCS is disabled while changing advertisement + * configuration. + */ + writel(0x0, cp->regs + REG_PCS_CFG); + + /* Advertise all capabilities except half-duplex. */ + val = readl(cp->regs + REG_PCS_MII_ADVERT); + val &= ~PCS_MII_ADVERT_HD; + val |= (PCS_MII_ADVERT_FD | PCS_MII_ADVERT_SYM_PAUSE | + PCS_MII_ADVERT_ASYM_PAUSE); + writel(val, cp->regs + REG_PCS_MII_ADVERT); + + /* enable PCS */ + writel(PCS_CFG_EN, cp->regs + REG_PCS_CFG); + + /* pcs workaround: enable sync detect */ + writel(PCS_SERDES_CTRL_SYNCD_EN, + cp->regs + REG_PCS_SERDES_CTRL); + } +} + + +static int cas_pcs_link_check(struct cas *cp) +{ + u32 stat, state_machine; + int retval = 0; + + /* The link status bit latches on zero, so you must + * read it twice in such a case to see a transition + * to the link being up. + */ + stat = readl(cp->regs + REG_PCS_MII_STATUS); + if ((stat & PCS_MII_STATUS_LINK_STATUS) == 0) + stat = readl(cp->regs + REG_PCS_MII_STATUS); + + /* The remote-fault indication is only valid + * when autoneg has completed. + */ + if ((stat & (PCS_MII_STATUS_AUTONEG_COMP | + PCS_MII_STATUS_REMOTE_FAULT)) == + (PCS_MII_STATUS_AUTONEG_COMP | PCS_MII_STATUS_REMOTE_FAULT)) { + if (netif_msg_link(cp)) + printk(KERN_INFO "%s: PCS RemoteFault\n", + cp->dev->name); + } + + /* work around link detection issue by querying the PCS state + * machine directly. + */ + state_machine = readl(cp->regs + REG_PCS_STATE_MACHINE); + if ((state_machine & PCS_SM_LINK_STATE_MASK) != SM_LINK_STATE_UP) { + stat &= ~PCS_MII_STATUS_LINK_STATUS; + } else if (state_machine & PCS_SM_WORD_SYNC_STATE_MASK) { + stat |= PCS_MII_STATUS_LINK_STATUS; + } + + if (stat & PCS_MII_STATUS_LINK_STATUS) { + if (cp->lstate != link_up) { + if (cp->opened) { + cp->lstate = link_up; + cp->link_transition = LINK_TRANSITION_LINK_UP; + + cas_set_link_modes(cp); + netif_carrier_on(cp->dev); + } + } + } else if (cp->lstate == link_up) { + cp->lstate = link_down; + if (link_transition_timeout != 0 && + cp->link_transition != LINK_TRANSITION_REQUESTED_RESET && + !cp->link_transition_jiffies_valid) { + /* + * force a reset, as a workaround for the + * link-failure problem. May want to move this to a + * point a bit earlier in the sequence. If we had + * generated a reset a short time ago, we'll wait for + * the link timer to check the status until a + * timer expires (link_transistion_jiffies_valid is + * true when the timer is running.) Instead of using + * a system timer, we just do a check whenever the + * link timer is running - this clears the flag after + * a suitable delay. + */ + retval = 1; + cp->link_transition = LINK_TRANSITION_REQUESTED_RESET; + cp->link_transition_jiffies = jiffies; + cp->link_transition_jiffies_valid = 1; + } else { + cp->link_transition = LINK_TRANSITION_ON_FAILURE; + } + netif_carrier_off(cp->dev); + if (cp->opened && netif_msg_link(cp)) { + printk(KERN_INFO "%s: PCS link down.\n", + cp->dev->name); + } + + /* Cassini only: if you force a mode, there can be + * sync problems on link down. to fix that, the following + * things need to be checked: + * 1) read serialink state register + * 2) read pcs status register to verify link down. + * 3) if link down and serial link == 0x03, then you need + * to global reset the chip. + */ + if ((cp->cas_flags & CAS_FLAG_REG_PLUS) == 0) { + /* should check to see if we're in a forced mode */ + stat = readl(cp->regs + REG_PCS_SERDES_STATE); + if (stat == 0x03) + return 1; + } + } else if (cp->lstate == link_down) { + if (link_transition_timeout != 0 && + cp->link_transition != LINK_TRANSITION_REQUESTED_RESET && + !cp->link_transition_jiffies_valid) { + /* force a reset, as a workaround for the + * link-failure problem. May want to move + * this to a point a bit earlier in the + * sequence. + */ + retval = 1; + cp->link_transition = LINK_TRANSITION_REQUESTED_RESET; + cp->link_transition_jiffies = jiffies; + cp->link_transition_jiffies_valid = 1; + } else { + cp->link_transition = LINK_TRANSITION_STILL_FAILED; + } + } + + return retval; +} + +static int cas_pcs_interrupt(struct net_device *dev, + struct cas *cp, u32 status) +{ + u32 stat = readl(cp->regs + REG_PCS_INTR_STATUS); + + if ((stat & PCS_INTR_STATUS_LINK_CHANGE) == 0) + return 0; + return cas_pcs_link_check(cp); +} + +static int cas_txmac_interrupt(struct net_device *dev, + struct cas *cp, u32 status) +{ + u32 txmac_stat = readl(cp->regs + REG_MAC_TX_STATUS); + + if (!txmac_stat) + return 0; + + if (netif_msg_intr(cp)) + printk(KERN_DEBUG "%s: txmac interrupt, txmac_stat: 0x%x\n", + cp->dev->name, txmac_stat); + + /* Defer timer expiration is quite normal, + * don't even log the event. + */ + if ((txmac_stat & MAC_TX_DEFER_TIMER) && + !(txmac_stat & ~MAC_TX_DEFER_TIMER)) + return 0; + + spin_lock(&cp->stat_lock[0]); + if (txmac_stat & MAC_TX_UNDERRUN) { + printk(KERN_ERR "%s: TX MAC xmit underrun.\n", + dev->name); + cp->net_stats[0].tx_fifo_errors++; + } + + if (txmac_stat & MAC_TX_MAX_PACKET_ERR) { + printk(KERN_ERR "%s: TX MAC max packet size error.\n", + dev->name); + cp->net_stats[0].tx_errors++; + } + + /* The rest are all cases of one of the 16-bit TX + * counters expiring. + */ + if (txmac_stat & MAC_TX_COLL_NORMAL) + cp->net_stats[0].collisions += 0x10000; + + if (txmac_stat & MAC_TX_COLL_EXCESS) { + cp->net_stats[0].tx_aborted_errors += 0x10000; + cp->net_stats[0].collisions += 0x10000; + } + + if (txmac_stat & MAC_TX_COLL_LATE) { + cp->net_stats[0].tx_aborted_errors += 0x10000; + cp->net_stats[0].collisions += 0x10000; + } + spin_unlock(&cp->stat_lock[0]); + + /* We do not keep track of MAC_TX_COLL_FIRST and + * MAC_TX_PEAK_ATTEMPTS events. + */ + return 0; +} + +static void cas_load_firmware(struct cas *cp, cas_hp_inst_t *firmware) +{ + cas_hp_inst_t *inst; + u32 val; + int i; + + i = 0; + while ((inst = firmware) && inst->note) { + writel(i, cp->regs + REG_HP_INSTR_RAM_ADDR); + + val = CAS_BASE(HP_INSTR_RAM_HI_VAL, inst->val); + val |= CAS_BASE(HP_INSTR_RAM_HI_MASK, inst->mask); + writel(val, cp->regs + REG_HP_INSTR_RAM_DATA_HI); + + val = CAS_BASE(HP_INSTR_RAM_MID_OUTARG, inst->outarg >> 10); + val |= CAS_BASE(HP_INSTR_RAM_MID_OUTOP, inst->outop); + val |= CAS_BASE(HP_INSTR_RAM_MID_FNEXT, inst->fnext); + val |= CAS_BASE(HP_INSTR_RAM_MID_FOFF, inst->foff); + val |= CAS_BASE(HP_INSTR_RAM_MID_SNEXT, inst->snext); + val |= CAS_BASE(HP_INSTR_RAM_MID_SOFF, inst->soff); + val |= CAS_BASE(HP_INSTR_RAM_MID_OP, inst->op); + writel(val, cp->regs + REG_HP_INSTR_RAM_DATA_MID); + + val = CAS_BASE(HP_INSTR_RAM_LOW_OUTMASK, inst->outmask); + val |= CAS_BASE(HP_INSTR_RAM_LOW_OUTSHIFT, inst->outshift); + val |= CAS_BASE(HP_INSTR_RAM_LOW_OUTEN, inst->outenab); + val |= CAS_BASE(HP_INSTR_RAM_LOW_OUTARG, inst->outarg); + writel(val, cp->regs + REG_HP_INSTR_RAM_DATA_LOW); + ++firmware; + ++i; + } +} + +static void cas_init_rx_dma(struct cas *cp) +{ + u64 desc_dma = cp->block_dvma; + u32 val; + int i, size; + + /* rx free descriptors */ + val = CAS_BASE(RX_CFG_SWIVEL, RX_SWIVEL_OFF_VAL); + val |= CAS_BASE(RX_CFG_DESC_RING, RX_DESC_RINGN_INDEX(0)); + val |= CAS_BASE(RX_CFG_COMP_RING, RX_COMP_RINGN_INDEX(0)); + if ((N_RX_DESC_RINGS > 1) && + (cp->cas_flags & CAS_FLAG_REG_PLUS)) /* do desc 2 */ + val |= CAS_BASE(RX_CFG_DESC_RING1, RX_DESC_RINGN_INDEX(1)); + writel(val, cp->regs + REG_RX_CFG); + + val = (unsigned long) cp->init_rxds[0] - + (unsigned long) cp->init_block; + writel((desc_dma + val) >> 32, cp->regs + REG_RX_DB_HI); + writel((desc_dma + val) & 0xffffffff, cp->regs + REG_RX_DB_LOW); + writel(RX_DESC_RINGN_SIZE(0) - 4, cp->regs + REG_RX_KICK); + + if (cp->cas_flags & CAS_FLAG_REG_PLUS) { + /* rx desc 2 is for IPSEC packets. however, + * we don't it that for that purpose. + */ + val = (unsigned long) cp->init_rxds[1] - + (unsigned long) cp->init_block; + writel((desc_dma + val) >> 32, cp->regs + REG_PLUS_RX_DB1_HI); + writel((desc_dma + val) & 0xffffffff, cp->regs + + REG_PLUS_RX_DB1_LOW); + writel(RX_DESC_RINGN_SIZE(1) - 4, cp->regs + + REG_PLUS_RX_KICK1); + } + + /* rx completion registers */ + val = (unsigned long) cp->init_rxcs[0] - + (unsigned long) cp->init_block; + writel((desc_dma + val) >> 32, cp->regs + REG_RX_CB_HI); + writel((desc_dma + val) & 0xffffffff, cp->regs + REG_RX_CB_LOW); + + if (cp->cas_flags & CAS_FLAG_REG_PLUS) { + /* rx comp 2-4 */ + for (i = 1; i < MAX_RX_COMP_RINGS; i++) { + val = (unsigned long) cp->init_rxcs[i] - + (unsigned long) cp->init_block; + writel((desc_dma + val) >> 32, cp->regs + + REG_PLUS_RX_CBN_HI(i)); + writel((desc_dma + val) & 0xffffffff, cp->regs + + REG_PLUS_RX_CBN_LOW(i)); + } + } + + /* read selective clear regs to prevent spurious interrupts + * on reset because complete == kick. + * selective clear set up to prevent interrupts on resets + */ + readl(cp->regs + REG_INTR_STATUS_ALIAS); + writel(INTR_RX_DONE | INTR_RX_BUF_UNAVAIL, cp->regs + REG_ALIAS_CLEAR); + if (cp->cas_flags & CAS_FLAG_REG_PLUS) { + for (i = 1; i < N_RX_COMP_RINGS; i++) + readl(cp->regs + REG_PLUS_INTRN_STATUS_ALIAS(i)); + + /* 2 is different from 3 and 4 */ + if (N_RX_COMP_RINGS > 1) + writel(INTR_RX_DONE_ALT | INTR_RX_BUF_UNAVAIL_1, + cp->regs + REG_PLUS_ALIASN_CLEAR(1)); + + for (i = 2; i < N_RX_COMP_RINGS; i++) + writel(INTR_RX_DONE_ALT, + cp->regs + REG_PLUS_ALIASN_CLEAR(i)); + } + + /* set up pause thresholds */ + val = CAS_BASE(RX_PAUSE_THRESH_OFF, + cp->rx_pause_off / RX_PAUSE_THRESH_QUANTUM); + val |= CAS_BASE(RX_PAUSE_THRESH_ON, + cp->rx_pause_on / RX_PAUSE_THRESH_QUANTUM); + writel(val, cp->regs + REG_RX_PAUSE_THRESH); + + /* zero out dma reassembly buffers */ + for (i = 0; i < 64; i++) { + writel(i, cp->regs + REG_RX_TABLE_ADDR); + writel(0x0, cp->regs + REG_RX_TABLE_DATA_LOW); + writel(0x0, cp->regs + REG_RX_TABLE_DATA_MID); + writel(0x0, cp->regs + REG_RX_TABLE_DATA_HI); + } + + /* make sure address register is 0 for normal operation */ + writel(0x0, cp->regs + REG_RX_CTRL_FIFO_ADDR); + writel(0x0, cp->regs + REG_RX_IPP_FIFO_ADDR); + + /* interrupt mitigation */ +#ifdef USE_RX_BLANK + val = CAS_BASE(RX_BLANK_INTR_TIME, RX_BLANK_INTR_TIME_VAL); + val |= CAS_BASE(RX_BLANK_INTR_PKT, RX_BLANK_INTR_PKT_VAL); + writel(val, cp->regs + REG_RX_BLANK); +#else + writel(0x0, cp->regs + REG_RX_BLANK); +#endif + + /* interrupt generation as a function of low water marks for + * free desc and completion entries. these are used to trigger + * housekeeping for rx descs. we don't use the free interrupt + * as it's not very useful + */ + /* val = CAS_BASE(RX_AE_THRESH_FREE, RX_AE_FREEN_VAL(0)); */ + val = CAS_BASE(RX_AE_THRESH_COMP, RX_AE_COMP_VAL); + writel(val, cp->regs + REG_RX_AE_THRESH); + if (cp->cas_flags & CAS_FLAG_REG_PLUS) { + val = CAS_BASE(RX_AE1_THRESH_FREE, RX_AE_FREEN_VAL(1)); + writel(val, cp->regs + REG_PLUS_RX_AE1_THRESH); + } + + /* Random early detect registers. useful for congestion avoidance. + * this should be tunable. + */ + writel(0x0, cp->regs + REG_RX_RED); + + /* receive page sizes. default == 2K (0x800) */ + val = 0; + if (cp->page_size == 0x1000) + val = 0x1; + else if (cp->page_size == 0x2000) + val = 0x2; + else if (cp->page_size == 0x4000) + val = 0x3; + + /* round mtu + offset. constrain to page size. */ + size = cp->dev->mtu + 64; + if (size > cp->page_size) + size = cp->page_size; + + if (size <= 0x400) + i = 0x0; + else if (size <= 0x800) + i = 0x1; + else if (size <= 0x1000) + i = 0x2; + else + i = 0x3; + + cp->mtu_stride = 1 << (i + 10); + val = CAS_BASE(RX_PAGE_SIZE, val); + val |= CAS_BASE(RX_PAGE_SIZE_MTU_STRIDE, i); + val |= CAS_BASE(RX_PAGE_SIZE_MTU_COUNT, cp->page_size >> (i + 10)); + val |= CAS_BASE(RX_PAGE_SIZE_MTU_OFF, 0x1); + writel(val, cp->regs + REG_RX_PAGE_SIZE); + + /* enable the header parser if desired */ + if (CAS_HP_FIRMWARE == cas_prog_null) + return; + + val = CAS_BASE(HP_CFG_NUM_CPU, CAS_NCPUS > 63 ? 0 : CAS_NCPUS); + val |= HP_CFG_PARSE_EN | HP_CFG_SYN_INC_MASK; + val |= CAS_BASE(HP_CFG_TCP_THRESH, HP_TCP_THRESH_VAL); + writel(val, cp->regs + REG_HP_CFG); +} + +static inline void cas_rxc_init(struct cas_rx_comp *rxc) +{ + memset(rxc, 0, sizeof(*rxc)); + rxc->word4 = cpu_to_le64(RX_COMP4_ZERO); +} + +/* NOTE: we use the ENC RX DESC ring for spares. the rx_page[0,1] + * flipping is protected by the fact that the chip will not + * hand back the same page index while it's being processed. + */ +static inline cas_page_t *cas_page_spare(struct cas *cp, const int index) +{ + cas_page_t *page = cp->rx_pages[1][index]; + cas_page_t *new; + + if (page_count(page->buffer) == 1) + return page; + + new = cas_page_dequeue(cp); + if (new) { + spin_lock(&cp->rx_inuse_lock); + list_add(&page->list, &cp->rx_inuse_list); + spin_unlock(&cp->rx_inuse_lock); + } + return new; +} + +/* this needs to be changed if we actually use the ENC RX DESC ring */ +static cas_page_t *cas_page_swap(struct cas *cp, const int ring, + const int index) +{ + cas_page_t **page0 = cp->rx_pages[0]; + cas_page_t **page1 = cp->rx_pages[1]; + + /* swap if buffer is in use */ + if (page_count(page0[index]->buffer) > 1) { + cas_page_t *new = cas_page_spare(cp, index); + if (new) { + page1[index] = page0[index]; + page0[index] = new; + } + } + RX_USED_SET(page0[index], 0); + return page0[index]; +} + +static void cas_clean_rxds(struct cas *cp) +{ + /* only clean ring 0 as ring 1 is used for spare buffers */ + struct cas_rx_desc *rxd = cp->init_rxds[0]; + int i, size; + + /* release all rx flows */ + for (i = 0; i < N_RX_FLOWS; i++) { + struct sk_buff *skb; + while ((skb = __skb_dequeue(&cp->rx_flows[i]))) { + cas_skb_release(skb); + } + } + + /* initialize descriptors */ + size = RX_DESC_RINGN_SIZE(0); + for (i = 0; i < size; i++) { + cas_page_t *page = cas_page_swap(cp, 0, i); + rxd[i].buffer = cpu_to_le64(page->dma_addr); + rxd[i].index = cpu_to_le64(CAS_BASE(RX_INDEX_NUM, i) | + CAS_BASE(RX_INDEX_RING, 0)); + } + + cp->rx_old[0] = RX_DESC_RINGN_SIZE(0) - 4; + cp->rx_last[0] = 0; + cp->cas_flags &= ~CAS_FLAG_RXD_POST(0); +} + +static void cas_clean_rxcs(struct cas *cp) +{ + int i, j; + + /* take ownership of rx comp descriptors */ + memset(cp->rx_cur, 0, sizeof(*cp->rx_cur)*N_RX_COMP_RINGS); + memset(cp->rx_new, 0, sizeof(*cp->rx_new)*N_RX_COMP_RINGS); + for (i = 0; i < N_RX_COMP_RINGS; i++) { + struct cas_rx_comp *rxc = cp->init_rxcs[i]; + for (j = 0; j < RX_COMP_RINGN_SIZE(i); j++) { + cas_rxc_init(rxc + j); + } + } +} + +#if 0 +/* When we get a RX fifo overflow, the RX unit is probably hung + * so we do the following. + * + * If any part of the reset goes wrong, we return 1 and that causes the + * whole chip to be reset. + */ +static int cas_rxmac_reset(struct cas *cp) +{ + struct net_device *dev = cp->dev; + int limit; + u32 val; + + /* First, reset MAC RX. */ + writel(cp->mac_rx_cfg & ~MAC_RX_CFG_EN, cp->regs + REG_MAC_RX_CFG); + for (limit = 0; limit < STOP_TRIES; limit++) { + if (!(readl(cp->regs + REG_MAC_RX_CFG) & MAC_RX_CFG_EN)) + break; + udelay(10); + } + if (limit == STOP_TRIES) { + printk(KERN_ERR "%s: RX MAC will not disable, resetting whole " + "chip.\n", dev->name); + return 1; + } + + /* Second, disable RX DMA. */ + writel(0, cp->regs + REG_RX_CFG); + for (limit = 0; limit < STOP_TRIES; limit++) { + if (!(readl(cp->regs + REG_RX_CFG) & RX_CFG_DMA_EN)) + break; + udelay(10); + } + if (limit == STOP_TRIES) { + printk(KERN_ERR "%s: RX DMA will not disable, resetting whole " + "chip.\n", dev->name); + return 1; + } + + mdelay(5); + + /* Execute RX reset command. */ + writel(SW_RESET_RX, cp->regs + REG_SW_RESET); + for (limit = 0; limit < STOP_TRIES; limit++) { + if (!(readl(cp->regs + REG_SW_RESET) & SW_RESET_RX)) + break; + udelay(10); + } + if (limit == STOP_TRIES) { + printk(KERN_ERR "%s: RX reset command will not execute, " + "resetting whole chip.\n", dev->name); + return 1; + } + + /* reset driver rx state */ + cas_clean_rxds(cp); + cas_clean_rxcs(cp); + + /* Now, reprogram the rest of RX unit. */ + cas_init_rx_dma(cp); + + /* re-enable */ + val = readl(cp->regs + REG_RX_CFG); + writel(val | RX_CFG_DMA_EN, cp->regs + REG_RX_CFG); + writel(MAC_RX_FRAME_RECV, cp->regs + REG_MAC_RX_MASK); + val = readl(cp->regs + REG_MAC_RX_CFG); + writel(val | MAC_RX_CFG_EN, cp->regs + REG_MAC_RX_CFG); + return 0; +} +#endif + +static int cas_rxmac_interrupt(struct net_device *dev, struct cas *cp, + u32 status) +{ + u32 stat = readl(cp->regs + REG_MAC_RX_STATUS); + + if (!stat) + return 0; + + if (netif_msg_intr(cp)) + printk(KERN_DEBUG "%s: rxmac interrupt, stat: 0x%x\n", + cp->dev->name, stat); + + /* these are all rollovers */ + spin_lock(&cp->stat_lock[0]); + if (stat & MAC_RX_ALIGN_ERR) + cp->net_stats[0].rx_frame_errors += 0x10000; + + if (stat & MAC_RX_CRC_ERR) + cp->net_stats[0].rx_crc_errors += 0x10000; + + if (stat & MAC_RX_LEN_ERR) + cp->net_stats[0].rx_length_errors += 0x10000; + + if (stat & MAC_RX_OVERFLOW) { + cp->net_stats[0].rx_over_errors++; + cp->net_stats[0].rx_fifo_errors++; + } + + /* We do not track MAC_RX_FRAME_COUNT and MAC_RX_VIOL_ERR + * events. + */ + spin_unlock(&cp->stat_lock[0]); + return 0; +} + +static int cas_mac_interrupt(struct net_device *dev, struct cas *cp, + u32 status) +{ + u32 stat = readl(cp->regs + REG_MAC_CTRL_STATUS); + + if (!stat) + return 0; + + if (netif_msg_intr(cp)) + printk(KERN_DEBUG "%s: mac interrupt, stat: 0x%x\n", + cp->dev->name, stat); + + /* This interrupt is just for pause frame and pause + * tracking. It is useful for diagnostics and debug + * but probably by default we will mask these events. + */ + if (stat & MAC_CTRL_PAUSE_STATE) + cp->pause_entered++; + + if (stat & MAC_CTRL_PAUSE_RECEIVED) + cp->pause_last_time_recvd = (stat >> 16); + + return 0; +} + + +/* Must be invoked under cp->lock. */ +static inline int cas_mdio_link_not_up(struct cas *cp) +{ + u16 val; + + switch (cp->lstate) { + case link_force_ret: + if (netif_msg_link(cp)) + printk(KERN_INFO "%s: Autoneg failed again, keeping" + " forced mode\n", cp->dev->name); + cas_phy_write(cp, MII_BMCR, cp->link_fcntl); + cp->timer_ticks = 5; + cp->lstate = link_force_ok; + cp->link_transition = LINK_TRANSITION_LINK_CONFIG; + break; + + case link_aneg: + val = cas_phy_read(cp, MII_BMCR); + + /* Try forced modes. we try things in the following order: + * 1000 full -> 100 full/half -> 10 half + */ + val &= ~(BMCR_ANRESTART | BMCR_ANENABLE); + val |= BMCR_FULLDPLX; + val |= (cp->cas_flags & CAS_FLAG_1000MB_CAP) ? + CAS_BMCR_SPEED1000 : BMCR_SPEED100; + cas_phy_write(cp, MII_BMCR, val); + cp->timer_ticks = 5; + cp->lstate = link_force_try; + cp->link_transition = LINK_TRANSITION_LINK_CONFIG; + break; + + case link_force_try: + /* Downgrade from 1000 to 100 to 10 Mbps if necessary. */ + val = cas_phy_read(cp, MII_BMCR); + cp->timer_ticks = 5; + if (val & CAS_BMCR_SPEED1000) { /* gigabit */ + val &= ~CAS_BMCR_SPEED1000; + val |= (BMCR_SPEED100 | BMCR_FULLDPLX); + cas_phy_write(cp, MII_BMCR, val); + break; + } + + if (val & BMCR_SPEED100) { + if (val & BMCR_FULLDPLX) /* fd failed */ + val &= ~BMCR_FULLDPLX; + else { /* 100Mbps failed */ + val &= ~BMCR_SPEED100; + } + cas_phy_write(cp, MII_BMCR, val); + break; + } + default: + break; + } + return 0; +} + + +/* must be invoked with cp->lock held */ +static int cas_mii_link_check(struct cas *cp, const u16 bmsr) +{ + int restart; + + if (bmsr & BMSR_LSTATUS) { + /* Ok, here we got a link. If we had it due to a forced + * fallback, and we were configured for autoneg, we + * retry a short autoneg pass. If you know your hub is + * broken, use ethtool ;) + */ + if ((cp->lstate == link_force_try) && + (cp->link_cntl & BMCR_ANENABLE)) { + cp->lstate = link_force_ret; + cp->link_transition = LINK_TRANSITION_LINK_CONFIG; + cas_mif_poll(cp, 0); + cp->link_fcntl = cas_phy_read(cp, MII_BMCR); + cp->timer_ticks = 5; + if (cp->opened && netif_msg_link(cp)) + printk(KERN_INFO "%s: Got link after fallback, retrying" + " autoneg once...\n", cp->dev->name); + cas_phy_write(cp, MII_BMCR, + cp->link_fcntl | BMCR_ANENABLE | + BMCR_ANRESTART); + cas_mif_poll(cp, 1); + + } else if (cp->lstate != link_up) { + cp->lstate = link_up; + cp->link_transition = LINK_TRANSITION_LINK_UP; + + if (cp->opened) { + cas_set_link_modes(cp); + netif_carrier_on(cp->dev); + } + } + return 0; + } + + /* link not up. if the link was previously up, we restart the + * whole process + */ + restart = 0; + if (cp->lstate == link_up) { + cp->lstate = link_down; + cp->link_transition = LINK_TRANSITION_LINK_DOWN; + + netif_carrier_off(cp->dev); + if (cp->opened && netif_msg_link(cp)) + printk(KERN_INFO "%s: Link down\n", + cp->dev->name); + restart = 1; + + } else if (++cp->timer_ticks > 10) + cas_mdio_link_not_up(cp); + + return restart; +} + +static int cas_mif_interrupt(struct net_device *dev, struct cas *cp, + u32 status) +{ + u32 stat = readl(cp->regs + REG_MIF_STATUS); + u16 bmsr; + + /* check for a link change */ + if (CAS_VAL(MIF_STATUS_POLL_STATUS, stat) == 0) + return 0; + + bmsr = CAS_VAL(MIF_STATUS_POLL_DATA, stat); + return cas_mii_link_check(cp, bmsr); +} + +static int cas_pci_interrupt(struct net_device *dev, struct cas *cp, + u32 status) +{ + u32 stat = readl(cp->regs + REG_PCI_ERR_STATUS); + + if (!stat) + return 0; + + printk(KERN_ERR "%s: PCI error [%04x:%04x] ", dev->name, stat, + readl(cp->regs + REG_BIM_DIAG)); + + /* cassini+ has this reserved */ + if ((stat & PCI_ERR_BADACK) && + ((cp->cas_flags & CAS_FLAG_REG_PLUS) == 0)) + printk("<No ACK64# during ABS64 cycle> "); + + if (stat & PCI_ERR_DTRTO) + printk("<Delayed transaction timeout> "); + if (stat & PCI_ERR_OTHER) + printk("<other> "); + if (stat & PCI_ERR_BIM_DMA_WRITE) + printk("<BIM DMA 0 write req> "); + if (stat & PCI_ERR_BIM_DMA_READ) + printk("<BIM DMA 0 read req> "); + printk("\n"); + + if (stat & PCI_ERR_OTHER) { + u16 cfg; + + /* Interrogate PCI config space for the + * true cause. + */ + pci_read_config_word(cp->pdev, PCI_STATUS, &cfg); + printk(KERN_ERR "%s: Read PCI cfg space status [%04x]\n", + dev->name, cfg); + if (cfg & PCI_STATUS_PARITY) + printk(KERN_ERR "%s: PCI parity error detected.\n", + dev->name); + if (cfg & PCI_STATUS_SIG_TARGET_ABORT) + printk(KERN_ERR "%s: PCI target abort.\n", + dev->name); + if (cfg & PCI_STATUS_REC_TARGET_ABORT) + printk(KERN_ERR "%s: PCI master acks target abort.\n", + dev->name); + if (cfg & PCI_STATUS_REC_MASTER_ABORT) + printk(KERN_ERR "%s: PCI master abort.\n", dev->name); + if (cfg & PCI_STATUS_SIG_SYSTEM_ERROR) + printk(KERN_ERR "%s: PCI system error SERR#.\n", + dev->name); + if (cfg & PCI_STATUS_DETECTED_PARITY) + printk(KERN_ERR "%s: PCI parity error.\n", + dev->name); + + /* Write the error bits back to clear them. */ + cfg &= (PCI_STATUS_PARITY | + PCI_STATUS_SIG_TARGET_ABORT | + PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_REC_MASTER_ABORT | + PCI_STATUS_SIG_SYSTEM_ERROR | + PCI_STATUS_DETECTED_PARITY); + pci_write_config_word(cp->pdev, PCI_STATUS, cfg); + } + + /* For all PCI errors, we should reset the chip. */ + return 1; +} + +/* All non-normal interrupt conditions get serviced here. + * Returns non-zero if we should just exit the interrupt + * handler right now (ie. if we reset the card which invalidates + * all of the other original irq status bits). + */ +static int cas_abnormal_irq(struct net_device *dev, struct cas *cp, + u32 status) +{ + if (status & INTR_RX_TAG_ERROR) { + /* corrupt RX tag framing */ + if (netif_msg_rx_err(cp)) + printk(KERN_DEBUG "%s: corrupt rx tag framing\n", + cp->dev->name); + spin_lock(&cp->stat_lock[0]); + cp->net_stats[0].rx_errors++; + spin_unlock(&cp->stat_lock[0]); + goto do_reset; + } + + if (status & INTR_RX_LEN_MISMATCH) { + /* length mismatch. */ + if (netif_msg_rx_err(cp)) + printk(KERN_DEBUG "%s: length mismatch for rx frame\n", + cp->dev->name); + spin_lock(&cp->stat_lock[0]); + cp->net_stats[0].rx_errors++; + spin_unlock(&cp->stat_lock[0]); + goto do_reset; + } + + if (status & INTR_PCS_STATUS) { + if (cas_pcs_interrupt(dev, cp, status)) + goto do_reset; + } + + if (status & INTR_TX_MAC_STATUS) { + if (cas_txmac_interrupt(dev, cp, status)) + goto do_reset; + } + + if (status & INTR_RX_MAC_STATUS) { + if (cas_rxmac_interrupt(dev, cp, status)) + goto do_reset; + } + + if (status & INTR_MAC_CTRL_STATUS) { + if (cas_mac_interrupt(dev, cp, status)) + goto do_reset; + } + + if (status & INTR_MIF_STATUS) { + if (cas_mif_interrupt(dev, cp, status)) + goto do_reset; + } + + if (status & INTR_PCI_ERROR_STATUS) { + if (cas_pci_interrupt(dev, cp, status)) + goto do_reset; + } + return 0; + +do_reset: +#if 1 + atomic_inc(&cp->reset_task_pending); + atomic_inc(&cp->reset_task_pending_all); + printk(KERN_ERR "%s:reset called in cas_abnormal_irq [0x%x]\n", + dev->name, status); + schedule_work(&cp->reset_task); +#else + atomic_set(&cp->reset_task_pending, CAS_RESET_ALL); + printk(KERN_ERR "reset called in cas_abnormal_irq\n"); + schedule_work(&cp->reset_task); +#endif + return 1; +} + +/* NOTE: CAS_TABORT returns 1 or 2 so that it can be used when + * determining whether to do a netif_stop/wakeup + */ +#define CAS_TABORT(x) (((x)->cas_flags & CAS_FLAG_TARGET_ABORT) ? 2 : 1) +#define CAS_ROUND_PAGE(x) (((x) + PAGE_SIZE - 1) & PAGE_MASK) +static inline int cas_calc_tabort(struct cas *cp, const unsigned long addr, + const int len) +{ + unsigned long off = addr + len; + + if (CAS_TABORT(cp) == 1) + return 0; + if ((CAS_ROUND_PAGE(off) - off) > TX_TARGET_ABORT_LEN) + return 0; + return TX_TARGET_ABORT_LEN; +} + +static inline void cas_tx_ringN(struct cas *cp, int ring, int limit) +{ + struct cas_tx_desc *txds; + struct sk_buff **skbs; + struct net_device *dev = cp->dev; + int entry, count; + + spin_lock(&cp->tx_lock[ring]); + txds = cp->init_txds[ring]; + skbs = cp->tx_skbs[ring]; + entry = cp->tx_old[ring]; + + count = TX_BUFF_COUNT(ring, entry, limit); + while (entry != limit) { + struct sk_buff *skb = skbs[entry]; + dma_addr_t daddr; + u32 dlen; + int frag; + + if (!skb) { + /* this should never occur */ + entry = TX_DESC_NEXT(ring, entry); + continue; + } + + /* however, we might get only a partial skb release. */ + count -= skb_shinfo(skb)->nr_frags + + + cp->tx_tiny_use[ring][entry].nbufs + 1; + if (count < 0) + break; + + if (netif_msg_tx_done(cp)) + printk(KERN_DEBUG "%s: tx[%d] done, slot %d\n", + cp->dev->name, ring, entry); + + skbs[entry] = NULL; + cp->tx_tiny_use[ring][entry].nbufs = 0; + + for (frag = 0; frag <= skb_shinfo(skb)->nr_frags; frag++) { + struct cas_tx_desc *txd = txds + entry; + + daddr = le64_to_cpu(txd->buffer); + dlen = CAS_VAL(TX_DESC_BUFLEN, + le64_to_cpu(txd->control)); + pci_unmap_page(cp->pdev, daddr, dlen, + PCI_DMA_TODEVICE); + entry = TX_DESC_NEXT(ring, entry); + + /* tiny buffer may follow */ + if (cp->tx_tiny_use[ring][entry].used) { + cp->tx_tiny_use[ring][entry].used = 0; + entry = TX_DESC_NEXT(ring, entry); + } + } + + spin_lock(&cp->stat_lock[ring]); + cp->net_stats[ring].tx_packets++; + cp->net_stats[ring].tx_bytes += skb->len; + spin_unlock(&cp->stat_lock[ring]); + dev_kfree_skb_irq(skb); + } + cp->tx_old[ring] = entry; + + /* this is wrong for multiple tx rings. the net device needs + * multiple queues for this to do the right thing. we wait + * for 2*packets to be available when using tiny buffers + */ + if (netif_queue_stopped(dev) && + (TX_BUFFS_AVAIL(cp, ring) > CAS_TABORT(cp)*(MAX_SKB_FRAGS + 1))) + netif_wake_queue(dev); + spin_unlock(&cp->tx_lock[ring]); +} + +static void cas_tx(struct net_device *dev, struct cas *cp, + u32 status) +{ + int limit, ring; +#ifdef USE_TX_COMPWB + u64 compwb = le64_to_cpu(cp->init_block->tx_compwb); +#endif + if (netif_msg_intr(cp)) + printk(KERN_DEBUG "%s: tx interrupt, status: 0x%x, %lx\n", + cp->dev->name, status, compwb); + /* process all the rings */ + for (ring = 0; ring < N_TX_RINGS; ring++) { +#ifdef USE_TX_COMPWB + /* use the completion writeback registers */ + limit = (CAS_VAL(TX_COMPWB_MSB, compwb) << 8) | + CAS_VAL(TX_COMPWB_LSB, compwb); + compwb = TX_COMPWB_NEXT(compwb); +#else + limit = readl(cp->regs + REG_TX_COMPN(ring)); +#endif + if (cp->tx_old[ring] != limit) + cas_tx_ringN(cp, ring, limit); + } +} + + +static int cas_rx_process_pkt(struct cas *cp, struct cas_rx_comp *rxc, + int entry, const u64 *words, + struct sk_buff **skbref) +{ + int dlen, hlen, len, i, alloclen; + int off, swivel = RX_SWIVEL_OFF_VAL; + struct cas_page *page; + struct sk_buff *skb; + void *addr, *crcaddr; + char *p; + + hlen = CAS_VAL(RX_COMP2_HDR_SIZE, words[1]); + dlen = CAS_VAL(RX_COMP1_DATA_SIZE, words[0]); + len = hlen + dlen; + + if (RX_COPY_ALWAYS || (words[2] & RX_COMP3_SMALL_PKT)) + alloclen = len; + else + alloclen = max(hlen, RX_COPY_MIN); + + skb = dev_alloc_skb(alloclen + swivel + cp->crc_size); + if (skb == NULL) + return -1; + + *skbref = skb; + skb->dev = cp->dev; + skb_reserve(skb, swivel); + + p = skb->data; + addr = crcaddr = NULL; + if (hlen) { /* always copy header pages */ + i = CAS_VAL(RX_COMP2_HDR_INDEX, words[1]); + page = cp->rx_pages[CAS_VAL(RX_INDEX_RING, i)][CAS_VAL(RX_INDEX_NUM, i)]; + off = CAS_VAL(RX_COMP2_HDR_OFF, words[1]) * 0x100 + + swivel; + + i = hlen; + if (!dlen) /* attach FCS */ + i += cp->crc_size; + pci_dma_sync_single_for_cpu(cp->pdev, page->dma_addr + off, i, + PCI_DMA_FROMDEVICE); + addr = cas_page_map(page->buffer); + memcpy(p, addr + off, i); + pci_dma_sync_single_for_device(cp->pdev, page->dma_addr + off, i, + PCI_DMA_FROMDEVICE); + cas_page_unmap(addr); + RX_USED_ADD(page, 0x100); + p += hlen; + swivel = 0; + } + + + if (alloclen < (hlen + dlen)) { + skb_frag_t *frag = skb_shinfo(skb)->frags; + + /* normal or jumbo packets. we use frags */ + i = CAS_VAL(RX_COMP1_DATA_INDEX, words[0]); + page = cp->rx_pages[CAS_VAL(RX_INDEX_RING, i)][CAS_VAL(RX_INDEX_NUM, i)]; + off = CAS_VAL(RX_COMP1_DATA_OFF, words[0]) + swivel; + + hlen = min(cp->page_size - off, dlen); + if (hlen < 0) { + if (netif_msg_rx_err(cp)) { + printk(KERN_DEBUG "%s: rx page overflow: " + "%d\n", cp->dev->name, hlen); + } + dev_kfree_skb_irq(skb); + return -1; + } + i = hlen; + if (i == dlen) /* attach FCS */ + i += cp->crc_size; + pci_dma_sync_single_for_cpu(cp->pdev, page->dma_addr + off, i, + PCI_DMA_FROMDEVICE); + + /* make sure we always copy a header */ + swivel = 0; + if (p == (char *) skb->data) { /* not split */ + addr = cas_page_map(page->buffer); + memcpy(p, addr + off, RX_COPY_MIN); + pci_dma_sync_single_for_device(cp->pdev, page->dma_addr + off, i, + PCI_DMA_FROMDEVICE); + cas_page_unmap(addr); + off += RX_COPY_MIN; + swivel = RX_COPY_MIN; + RX_USED_ADD(page, cp->mtu_stride); + } else { + RX_USED_ADD(page, hlen); + } + skb_put(skb, alloclen); + + skb_shinfo(skb)->nr_frags++; + skb->data_len += hlen - swivel; + skb->len += hlen - swivel; + + get_page(page->buffer); + frag->page = page->buffer; + frag->page_offset = off; + frag->size = hlen - swivel; + + /* any more data? */ + if ((words[0] & RX_COMP1_SPLIT_PKT) && ((dlen -= hlen) > 0)) { + hlen = dlen; + off = 0; + + i = CAS_VAL(RX_COMP2_NEXT_INDEX, words[1]); + page = cp->rx_pages[CAS_VAL(RX_INDEX_RING, i)][CAS_VAL(RX_INDEX_NUM, i)]; + pci_dma_sync_single_for_cpu(cp->pdev, page->dma_addr, + hlen + cp->crc_size, + PCI_DMA_FROMDEVICE); + pci_dma_sync_single_for_device(cp->pdev, page->dma_addr, + hlen + cp->crc_size, + PCI_DMA_FROMDEVICE); + + skb_shinfo(skb)->nr_frags++; + skb->data_len += hlen; + skb->len += hlen; + frag++; + + get_page(page->buffer); + frag->page = page->buffer; + frag->page_offset = 0; + frag->size = hlen; + RX_USED_ADD(page, hlen + cp->crc_size); + } + + if (cp->crc_size) { + addr = cas_page_map(page->buffer); + crcaddr = addr + off + hlen; + } + + } else { + /* copying packet */ + if (!dlen) + goto end_copy_pkt; + + i = CAS_VAL(RX_COMP1_DATA_INDEX, words[0]); + page = cp->rx_pages[CAS_VAL(RX_INDEX_RING, i)][CAS_VAL(RX_INDEX_NUM, i)]; + off = CAS_VAL(RX_COMP1_DATA_OFF, words[0]) + swivel; + hlen = min(cp->page_size - off, dlen); + if (hlen < 0) { + if (netif_msg_rx_err(cp)) { + printk(KERN_DEBUG "%s: rx page overflow: " + "%d\n", cp->dev->name, hlen); + } + dev_kfree_skb_irq(skb); + return -1; + } + i = hlen; + if (i == dlen) /* attach FCS */ + i += cp->crc_size; + pci_dma_sync_single_for_cpu(cp->pdev, page->dma_addr + off, i, + PCI_DMA_FROMDEVICE); + addr = cas_page_map(page->buffer); + memcpy(p, addr + off, i); + pci_dma_sync_single_for_device(cp->pdev, page->dma_addr + off, i, + PCI_DMA_FROMDEVICE); + cas_page_unmap(addr); + if (p == (char *) skb->data) /* not split */ + RX_USED_ADD(page, cp->mtu_stride); + else + RX_USED_ADD(page, i); + + /* any more data? */ + if ((words[0] & RX_COMP1_SPLIT_PKT) && ((dlen -= hlen) > 0)) { + p += hlen; + i = CAS_VAL(RX_COMP2_NEXT_INDEX, words[1]); + page = cp->rx_pages[CAS_VAL(RX_INDEX_RING, i)][CAS_VAL(RX_INDEX_NUM, i)]; + pci_dma_sync_single_for_cpu(cp->pdev, page->dma_addr, + dlen + cp->crc_size, + PCI_DMA_FROMDEVICE); + addr = cas_page_map(page->buffer); + memcpy(p, addr, dlen + cp->crc_size); + pci_dma_sync_single_for_device(cp->pdev, page->dma_addr, + dlen + cp->crc_size, + PCI_DMA_FROMDEVICE); + cas_page_unmap(addr); + RX_USED_ADD(page, dlen + cp->crc_size); + } +end_copy_pkt: + if (cp->crc_size) { + addr = NULL; + crcaddr = skb->data + alloclen; + } + skb_put(skb, alloclen); + } + + i = CAS_VAL(RX_COMP4_TCP_CSUM, words[3]); + if (cp->crc_size) { + /* checksum includes FCS. strip it out. */ + i = csum_fold(csum_partial(crcaddr, cp->crc_size, i)); + if (addr) + cas_page_unmap(addr); + } + skb->csum = ntohs(i ^ 0xffff); + skb->ip_summed = CHECKSUM_HW; + skb->protocol = eth_type_trans(skb, cp->dev); + return len; +} + + +/* we can handle up to 64 rx flows at a time. we do the same thing + * as nonreassm except that we batch up the buffers. + * NOTE: we currently just treat each flow as a bunch of packets that + * we pass up. a better way would be to coalesce the packets + * into a jumbo packet. to do that, we need to do the following: + * 1) the first packet will have a clean split between header and + * data. save both. + * 2) each time the next flow packet comes in, extend the + * data length and merge the checksums. + * 3) on flow release, fix up the header. + * 4) make sure the higher layer doesn't care. + * because packets get coalesced, we shouldn't run into fragment count + * issues. + */ +static inline void cas_rx_flow_pkt(struct cas *cp, const u64 *words, + struct sk_buff *skb) +{ + int flowid = CAS_VAL(RX_COMP3_FLOWID, words[2]) & (N_RX_FLOWS - 1); + struct sk_buff_head *flow = &cp->rx_flows[flowid]; + + /* this is protected at a higher layer, so no need to + * do any additional locking here. stick the buffer + * at the end. + */ + __skb_insert(skb, flow->prev, (struct sk_buff *) flow, flow); + if (words[0] & RX_COMP1_RELEASE_FLOW) { + while ((skb = __skb_dequeue(flow))) { + cas_skb_release(skb); + } + } +} + +/* put rx descriptor back on ring. if a buffer is in use by a higher + * layer, this will need to put in a replacement. + */ +static void cas_post_page(struct cas *cp, const int ring, const int index) +{ + cas_page_t *new; + int entry; + + entry = cp->rx_old[ring]; + + new = cas_page_swap(cp, ring, index); + cp->init_rxds[ring][entry].buffer = cpu_to_le64(new->dma_addr); + cp->init_rxds[ring][entry].index = + cpu_to_le64(CAS_BASE(RX_INDEX_NUM, index) | + CAS_BASE(RX_INDEX_RING, ring)); + + entry = RX_DESC_ENTRY(ring, entry + 1); + cp->rx_old[ring] = entry; + + if (entry % 4) + return; + + if (ring == 0) + writel(entry, cp->regs + REG_RX_KICK); + else if ((N_RX_DESC_RINGS > 1) && + (cp->cas_flags & CAS_FLAG_REG_PLUS)) + writel(entry, cp->regs + REG_PLUS_RX_KICK1); +} + + +/* only when things are bad */ +static int cas_post_rxds_ringN(struct cas *cp, int ring, int num) +{ + unsigned int entry, last, count, released; + int cluster; + cas_page_t **page = cp->rx_pages[ring]; + + entry = cp->rx_old[ring]; + + if (netif_msg_intr(cp)) + printk(KERN_DEBUG "%s: rxd[%d] interrupt, done: %d\n", + cp->dev->name, ring, entry); + + cluster = -1; + count = entry & 0x3; + last = RX_DESC_ENTRY(ring, num ? entry + num - 4: entry - 4); + released = 0; + while (entry != last) { + /* make a new buffer if it's still in use */ + if (page_count(page[entry]->buffer) > 1) { + cas_page_t *new = cas_page_dequeue(cp); + if (!new) { + /* let the timer know that we need to + * do this again + */ + cp->cas_flags |= CAS_FLAG_RXD_POST(ring); + if (!timer_pending(&cp->link_timer)) + mod_timer(&cp->link_timer, jiffies + + CAS_LINK_FAST_TIMEOUT); + cp->rx_old[ring] = entry; + cp->rx_last[ring] = num ? num - released : 0; + return -ENOMEM; + } + spin_lock(&cp->rx_inuse_lock); + list_add(&page[entry]->list, &cp->rx_inuse_list); + spin_unlock(&cp->rx_inuse_lock); + cp->init_rxds[ring][entry].buffer = + cpu_to_le64(new->dma_addr); + page[entry] = new; + + } + + if (++count == 4) { + cluster = entry; + count = 0; + } + released++; + entry = RX_DESC_ENTRY(ring, entry + 1); + } + cp->rx_old[ring] = entry; + + if (cluster < 0) + return 0; + + if (ring == 0) + writel(cluster, cp->regs + REG_RX_KICK); + else if ((N_RX_DESC_RINGS > 1) && + (cp->cas_flags & CAS_FLAG_REG_PLUS)) + writel(cluster, cp->regs + REG_PLUS_RX_KICK1); + return 0; +} + + +/* process a completion ring. packets are set up in three basic ways: + * small packets: should be copied header + data in single buffer. + * large packets: header and data in a single buffer. + * split packets: header in a separate buffer from data. + * data may be in multiple pages. data may be > 256 + * bytes but in a single page. + * + * NOTE: RX page posting is done in this routine as well. while there's + * the capability of using multiple RX completion rings, it isn't + * really worthwhile due to the fact that the page posting will + * force serialization on the single descriptor ring. + */ +static int cas_rx_ringN(struct cas *cp, int ring, int budget) +{ + struct cas_rx_comp *rxcs = cp->init_rxcs[ring]; + int entry, drops; + int npackets = 0; + + if (netif_msg_intr(cp)) + printk(KERN_DEBUG "%s: rx[%d] interrupt, done: %d/%d\n", + cp->dev->name, ring, + readl(cp->regs + REG_RX_COMP_HEAD), + cp->rx_new[ring]); + + entry = cp->rx_new[ring]; + drops = 0; + while (1) { + struct cas_rx_comp *rxc = rxcs + entry; + struct sk_buff *skb; + int type, len; + u64 words[4]; + int i, dring; + + words[0] = le64_to_cpu(rxc->word1); + words[1] = le64_to_cpu(rxc->word2); + words[2] = le64_to_cpu(rxc->word3); + words[3] = le64_to_cpu(rxc->word4); + + /* don't touch if still owned by hw */ + type = CAS_VAL(RX_COMP1_TYPE, words[0]); + if (type == 0) + break; + + /* hw hasn't cleared the zero bit yet */ + if (words[3] & RX_COMP4_ZERO) { + break; + } + + /* get info on the packet */ + if (words[3] & (RX_COMP4_LEN_MISMATCH | RX_COMP4_BAD)) { + spin_lock(&cp->stat_lock[ring]); + cp->net_stats[ring].rx_errors++; + if (words[3] & RX_COMP4_LEN_MISMATCH) + cp->net_stats[ring].rx_length_errors++; + if (words[3] & RX_COMP4_BAD) + cp->net_stats[ring].rx_crc_errors++; + spin_unlock(&cp->stat_lock[ring]); + + /* We'll just return it to Cassini. */ + drop_it: + spin_lock(&cp->stat_lock[ring]); + ++cp->net_stats[ring].rx_dropped; + spin_unlock(&cp->stat_lock[ring]); + goto next; + } + + len = cas_rx_process_pkt(cp, rxc, entry, words, &skb); + if (len < 0) { + ++drops; + goto drop_it; + } + + /* see if it's a flow re-assembly or not. the driver + * itself handles release back up. + */ + if (RX_DONT_BATCH || (type == 0x2)) { + /* non-reassm: these always get released */ + cas_skb_release(skb); + } else { + cas_rx_flow_pkt(cp, words, skb); + } + + spin_lock(&cp->stat_lock[ring]); + cp->net_stats[ring].rx_packets++; + cp->net_stats[ring].rx_bytes += len; + spin_unlock(&cp->stat_lock[ring]); + cp->dev->last_rx = jiffies; + + next: + npackets++; + + /* should it be released? */ + if (words[0] & RX_COMP1_RELEASE_HDR) { + i = CAS_VAL(RX_COMP2_HDR_INDEX, words[1]); + dring = CAS_VAL(RX_INDEX_RING, i); + i = CAS_VAL(RX_INDEX_NUM, i); + cas_post_page(cp, dring, i); + } + + if (words[0] & RX_COMP1_RELEASE_DATA) { + i = CAS_VAL(RX_COMP1_DATA_INDEX, words[0]); + dring = CAS_VAL(RX_INDEX_RING, i); + i = CAS_VAL(RX_INDEX_NUM, i); + cas_post_page(cp, dring, i); + } + + if (words[0] & RX_COMP1_RELEASE_NEXT) { + i = CAS_VAL(RX_COMP2_NEXT_INDEX, words[1]); + dring = CAS_VAL(RX_INDEX_RING, i); + i = CAS_VAL(RX_INDEX_NUM, i); + cas_post_page(cp, dring, i); + } + + /* skip to the next entry */ + entry = RX_COMP_ENTRY(ring, entry + 1 + + CAS_VAL(RX_COMP1_SKIP, words[0])); +#ifdef USE_NAPI + if (budget && (npackets >= budget)) + break; +#endif + } + cp->rx_new[ring] = entry; + + if (drops) + printk(KERN_INFO "%s: Memory squeeze, deferring packet.\n", + cp->dev->name); + return npackets; +} + + +/* put completion entries back on the ring */ +static void cas_post_rxcs_ringN(struct net_device *dev, + struct cas *cp, int ring) +{ + struct cas_rx_comp *rxc = cp->init_rxcs[ring]; + int last, entry; + + last = cp->rx_cur[ring]; + entry = cp->rx_new[ring]; + if (netif_msg_intr(cp)) + printk(KERN_DEBUG "%s: rxc[%d] interrupt, done: %d/%d\n", + dev->name, ring, readl(cp->regs + REG_RX_COMP_HEAD), + entry); + + /* zero and re-mark descriptors */ + while (last != entry) { + cas_rxc_init(rxc + last); + last = RX_COMP_ENTRY(ring, last + 1); + } + cp->rx_cur[ring] = last; + + if (ring == 0) + writel(last, cp->regs + REG_RX_COMP_TAIL); + else if (cp->cas_flags & CAS_FLAG_REG_PLUS) + writel(last, cp->regs + REG_PLUS_RX_COMPN_TAIL(ring)); +} + + + +/* cassini can use all four PCI interrupts for the completion ring. + * rings 3 and 4 are identical + */ +#if defined(USE_PCI_INTC) || defined(USE_PCI_INTD) +static inline void cas_handle_irqN(struct net_device *dev, + struct cas *cp, const u32 status, + const int ring) +{ + if (status & (INTR_RX_COMP_FULL_ALT | INTR_RX_COMP_AF_ALT)) + cas_post_rxcs_ringN(dev, cp, ring); +} + +static irqreturn_t cas_interruptN(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct cas *cp = netdev_priv(dev); + unsigned long flags; + int ring; + u32 status = readl(cp->regs + REG_PLUS_INTRN_STATUS(ring)); + + /* check for shared irq */ + if (status == 0) + return IRQ_NONE; + + ring = (irq == cp->pci_irq_INTC) ? 2 : 3; + spin_lock_irqsave(&cp->lock, flags); + if (status & INTR_RX_DONE_ALT) { /* handle rx separately */ +#ifdef USE_NAPI + cas_mask_intr(cp); + netif_rx_schedule(dev); +#else + cas_rx_ringN(cp, ring, 0); +#endif + status &= ~INTR_RX_DONE_ALT; + } + + if (status) + cas_handle_irqN(dev, cp, status, ring); + spin_unlock_irqrestore(&cp->lock, flags); + return IRQ_HANDLED; +} +#endif + +#ifdef USE_PCI_INTB +/* everything but rx packets */ +static inline void cas_handle_irq1(struct cas *cp, const u32 status) +{ + if (status & INTR_RX_BUF_UNAVAIL_1) { + /* Frame arrived, no free RX buffers available. + * NOTE: we can get this on a link transition. */ + cas_post_rxds_ringN(cp, 1, 0); + spin_lock(&cp->stat_lock[1]); + cp->net_stats[1].rx_dropped++; + spin_unlock(&cp->stat_lock[1]); + } + + if (status & INTR_RX_BUF_AE_1) + cas_post_rxds_ringN(cp, 1, RX_DESC_RINGN_SIZE(1) - + RX_AE_FREEN_VAL(1)); + + if (status & (INTR_RX_COMP_AF | INTR_RX_COMP_FULL)) + cas_post_rxcs_ringN(cp, 1); +} + +/* ring 2 handles a few more events than 3 and 4 */ +static irqreturn_t cas_interrupt1(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct cas *cp = netdev_priv(dev); + unsigned long flags; + u32 status = readl(cp->regs + REG_PLUS_INTRN_STATUS(1)); + + /* check for shared interrupt */ + if (status == 0) + return IRQ_NONE; + + spin_lock_irqsave(&cp->lock, flags); + if (status & INTR_RX_DONE_ALT) { /* handle rx separately */ +#ifdef USE_NAPI + cas_mask_intr(cp); + netif_rx_schedule(dev); +#else + cas_rx_ringN(cp, 1, 0); +#endif + status &= ~INTR_RX_DONE_ALT; + } + if (status) + cas_handle_irq1(cp, status); + spin_unlock_irqrestore(&cp->lock, flags); + return IRQ_HANDLED; +} +#endif + +static inline void cas_handle_irq(struct net_device *dev, + struct cas *cp, const u32 status) +{ + /* housekeeping interrupts */ + if (status & INTR_ERROR_MASK) + cas_abnormal_irq(dev, cp, status); + + if (status & INTR_RX_BUF_UNAVAIL) { + /* Frame arrived, no free RX buffers available. + * NOTE: we can get this on a link transition. + */ + cas_post_rxds_ringN(cp, 0, 0); + spin_lock(&cp->stat_lock[0]); + cp->net_stats[0].rx_dropped++; + spin_unlock(&cp->stat_lock[0]); + } else if (status & INTR_RX_BUF_AE) { + cas_post_rxds_ringN(cp, 0, RX_DESC_RINGN_SIZE(0) - + RX_AE_FREEN_VAL(0)); + } + + if (status & (INTR_RX_COMP_AF | INTR_RX_COMP_FULL)) + cas_post_rxcs_ringN(dev, cp, 0); +} + +static irqreturn_t cas_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct cas *cp = netdev_priv(dev); + unsigned long flags; + u32 status = readl(cp->regs + REG_INTR_STATUS); + + if (status == 0) + return IRQ_NONE; + + spin_lock_irqsave(&cp->lock, flags); + if (status & (INTR_TX_ALL | INTR_TX_INTME)) { + cas_tx(dev, cp, status); + status &= ~(INTR_TX_ALL | INTR_TX_INTME); + } + + if (status & INTR_RX_DONE) { +#ifdef USE_NAPI + cas_mask_intr(cp); + netif_rx_schedule(dev); +#else + cas_rx_ringN(cp, 0, 0); +#endif + status &= ~INTR_RX_DONE; + } + + if (status) + cas_handle_irq(dev, cp, status); + spin_unlock_irqrestore(&cp->lock, flags); + return IRQ_HANDLED; +} + + +#ifdef USE_NAPI +static int cas_poll(struct net_device *dev, int *budget) +{ + struct cas *cp = netdev_priv(dev); + int i, enable_intr, todo, credits; + u32 status = readl(cp->regs + REG_INTR_STATUS); + unsigned long flags; + + spin_lock_irqsave(&cp->lock, flags); + cas_tx(dev, cp, status); + spin_unlock_irqrestore(&cp->lock, flags); + + /* NAPI rx packets. we spread the credits across all of the + * rxc rings + */ + todo = min(*budget, dev->quota); + + /* to make sure we're fair with the work we loop through each + * ring N_RX_COMP_RING times with a request of + * todo / N_RX_COMP_RINGS + */ + enable_intr = 1; + credits = 0; + for (i = 0; i < N_RX_COMP_RINGS; i++) { + int j; + for (j = 0; j < N_RX_COMP_RINGS; j++) { + credits += cas_rx_ringN(cp, j, todo / N_RX_COMP_RINGS); + if (credits >= todo) { + enable_intr = 0; + goto rx_comp; + } + } + } + +rx_comp: + *budget -= credits; + dev->quota -= credits; + + /* final rx completion */ + spin_lock_irqsave(&cp->lock, flags); + if (status) + cas_handle_irq(dev, cp, status); + +#ifdef USE_PCI_INTB + if (N_RX_COMP_RINGS > 1) { + status = readl(cp->regs + REG_PLUS_INTRN_STATUS(1)); + if (status) + cas_handle_irq1(dev, cp, status); + } +#endif + +#ifdef USE_PCI_INTC + if (N_RX_COMP_RINGS > 2) { + status = readl(cp->regs + REG_PLUS_INTRN_STATUS(2)); + if (status) + cas_handle_irqN(dev, cp, status, 2); + } +#endif + +#ifdef USE_PCI_INTD + if (N_RX_COMP_RINGS > 3) { + status = readl(cp->regs + REG_PLUS_INTRN_STATUS(3)); + if (status) + cas_handle_irqN(dev, cp, status, 3); + } +#endif + spin_unlock_irqrestore(&cp->lock, flags); + if (enable_intr) { + netif_rx_complete(dev); + cas_unmask_intr(cp); + return 0; + } + return 1; +} +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void cas_netpoll(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + + cas_disable_irq(cp, 0); + cas_interrupt(cp->pdev->irq, dev, NULL); + cas_enable_irq(cp, 0); + +#ifdef USE_PCI_INTB + if (N_RX_COMP_RINGS > 1) { + /* cas_interrupt1(); */ + } +#endif +#ifdef USE_PCI_INTC + if (N_RX_COMP_RINGS > 2) { + /* cas_interruptN(); */ + } +#endif +#ifdef USE_PCI_INTD + if (N_RX_COMP_RINGS > 3) { + /* cas_interruptN(); */ + } +#endif +} +#endif + +static void cas_tx_timeout(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + + printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name); + if (!cp->hw_running) { + printk("%s: hrm.. hw not running!\n", dev->name); + return; + } + + printk(KERN_ERR "%s: MIF_STATE[%08x]\n", + dev->name, readl(cp->regs + REG_MIF_STATE_MACHINE)); + + printk(KERN_ERR "%s: MAC_STATE[%08x]\n", + dev->name, readl(cp->regs + REG_MAC_STATE_MACHINE)); + + printk(KERN_ERR "%s: TX_STATE[%08x:%08x:%08x] " + "FIFO[%08x:%08x:%08x] SM1[%08x] SM2[%08x]\n", + dev->name, + readl(cp->regs + REG_TX_CFG), + readl(cp->regs + REG_MAC_TX_STATUS), + readl(cp->regs + REG_MAC_TX_CFG), + readl(cp->regs + REG_TX_FIFO_PKT_CNT), + readl(cp->regs + REG_TX_FIFO_WRITE_PTR), + readl(cp->regs + REG_TX_FIFO_READ_PTR), + readl(cp->regs + REG_TX_SM_1), + readl(cp->regs + REG_TX_SM_2)); + + printk(KERN_ERR "%s: RX_STATE[%08x:%08x:%08x]\n", + dev->name, + readl(cp->regs + REG_RX_CFG), + readl(cp->regs + REG_MAC_RX_STATUS), + readl(cp->regs + REG_MAC_RX_CFG)); + + printk(KERN_ERR "%s: HP_STATE[%08x:%08x:%08x:%08x]\n", + dev->name, + readl(cp->regs + REG_HP_STATE_MACHINE), + readl(cp->regs + REG_HP_STATUS0), + readl(cp->regs + REG_HP_STATUS1), + readl(cp->regs + REG_HP_STATUS2)); + +#if 1 + atomic_inc(&cp->reset_task_pending); + atomic_inc(&cp->reset_task_pending_all); + schedule_work(&cp->reset_task); +#else + atomic_set(&cp->reset_task_pending, CAS_RESET_ALL); + schedule_work(&cp->reset_task); +#endif +} + +static inline int cas_intme(int ring, int entry) +{ + /* Algorithm: IRQ every 1/2 of descriptors. */ + if (!(entry & ((TX_DESC_RINGN_SIZE(ring) >> 1) - 1))) + return 1; + return 0; +} + + +static void cas_write_txd(struct cas *cp, int ring, int entry, + dma_addr_t mapping, int len, u64 ctrl, int last) +{ + struct cas_tx_desc *txd = cp->init_txds[ring] + entry; + + ctrl |= CAS_BASE(TX_DESC_BUFLEN, len); + if (cas_intme(ring, entry)) + ctrl |= TX_DESC_INTME; + if (last) + ctrl |= TX_DESC_EOF; + txd->control = cpu_to_le64(ctrl); + txd->buffer = cpu_to_le64(mapping); +} + +static inline void *tx_tiny_buf(struct cas *cp, const int ring, + const int entry) +{ + return cp->tx_tiny_bufs[ring] + TX_TINY_BUF_LEN*entry; +} + +static inline dma_addr_t tx_tiny_map(struct cas *cp, const int ring, + const int entry, const int tentry) +{ + cp->tx_tiny_use[ring][tentry].nbufs++; + cp->tx_tiny_use[ring][entry].used = 1; + return cp->tx_tiny_dvma[ring] + TX_TINY_BUF_LEN*entry; +} + +static inline int cas_xmit_tx_ringN(struct cas *cp, int ring, + struct sk_buff *skb) +{ + struct net_device *dev = cp->dev; + int entry, nr_frags, frag, tabort, tentry; + dma_addr_t mapping; + unsigned long flags; + u64 ctrl; + u32 len; + + spin_lock_irqsave(&cp->tx_lock[ring], flags); + + /* This is a hard error, log it. */ + if (TX_BUFFS_AVAIL(cp, ring) <= + CAS_TABORT(cp)*(skb_shinfo(skb)->nr_frags + 1)) { + netif_stop_queue(dev); + spin_unlock_irqrestore(&cp->tx_lock[ring], flags); + printk(KERN_ERR PFX "%s: BUG! Tx Ring full when " + "queue awake!\n", dev->name); + return 1; + } + + ctrl = 0; + if (skb->ip_summed == CHECKSUM_HW) { + u64 csum_start_off, csum_stuff_off; + + csum_start_off = (u64) (skb->h.raw - skb->data); + csum_stuff_off = (u64) ((skb->h.raw + skb->csum) - skb->data); + + ctrl = TX_DESC_CSUM_EN | + CAS_BASE(TX_DESC_CSUM_START, csum_start_off) | + CAS_BASE(TX_DESC_CSUM_STUFF, csum_stuff_off); + } + + entry = cp->tx_new[ring]; + cp->tx_skbs[ring][entry] = skb; + + nr_frags = skb_shinfo(skb)->nr_frags; + len = skb_headlen(skb); + mapping = pci_map_page(cp->pdev, virt_to_page(skb->data), + offset_in_page(skb->data), len, + PCI_DMA_TODEVICE); + + tentry = entry; + tabort = cas_calc_tabort(cp, (unsigned long) skb->data, len); + if (unlikely(tabort)) { + /* NOTE: len is always > tabort */ + cas_write_txd(cp, ring, entry, mapping, len - tabort, + ctrl | TX_DESC_SOF, 0); + entry = TX_DESC_NEXT(ring, entry); + + memcpy(tx_tiny_buf(cp, ring, entry), skb->data + + len - tabort, tabort); + mapping = tx_tiny_map(cp, ring, entry, tentry); + cas_write_txd(cp, ring, entry, mapping, tabort, ctrl, + (nr_frags == 0)); + } else { + cas_write_txd(cp, ring, entry, mapping, len, ctrl | + TX_DESC_SOF, (nr_frags == 0)); + } + entry = TX_DESC_NEXT(ring, entry); + + for (frag = 0; frag < nr_frags; frag++) { + skb_frag_t *fragp = &skb_shinfo(skb)->frags[frag]; + + len = fragp->size; + mapping = pci_map_page(cp->pdev, fragp->page, + fragp->page_offset, len, + PCI_DMA_TODEVICE); + + tabort = cas_calc_tabort(cp, fragp->page_offset, len); + if (unlikely(tabort)) { + void *addr; + + /* NOTE: len is always > tabort */ + cas_write_txd(cp, ring, entry, mapping, len - tabort, + ctrl, 0); + entry = TX_DESC_NEXT(ring, entry); + + addr = cas_page_map(fragp->page); + memcpy(tx_tiny_buf(cp, ring, entry), + addr + fragp->page_offset + len - tabort, + tabort); + cas_page_unmap(addr); + mapping = tx_tiny_map(cp, ring, entry, tentry); + len = tabort; + } + + cas_write_txd(cp, ring, entry, mapping, len, ctrl, + (frag + 1 == nr_frags)); + entry = TX_DESC_NEXT(ring, entry); + } + + cp->tx_new[ring] = entry; + if (TX_BUFFS_AVAIL(cp, ring) <= CAS_TABORT(cp)*(MAX_SKB_FRAGS + 1)) + netif_stop_queue(dev); + + if (netif_msg_tx_queued(cp)) + printk(KERN_DEBUG "%s: tx[%d] queued, slot %d, skblen %d, " + "avail %d\n", + dev->name, ring, entry, skb->len, + TX_BUFFS_AVAIL(cp, ring)); + writel(entry, cp->regs + REG_TX_KICKN(ring)); + spin_unlock_irqrestore(&cp->tx_lock[ring], flags); + return 0; +} + +static int cas_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + + /* this is only used as a load-balancing hint, so it doesn't + * need to be SMP safe + */ + static int ring; + + skb = skb_padto(skb, cp->min_frame_size); + if (!skb) + return 0; + + /* XXX: we need some higher-level QoS hooks to steer packets to + * individual queues. + */ + if (cas_xmit_tx_ringN(cp, ring++ & N_TX_RINGS_MASK, skb)) + return 1; + dev->trans_start = jiffies; + return 0; +} + +static void cas_init_tx_dma(struct cas *cp) +{ + u64 desc_dma = cp->block_dvma; + unsigned long off; + u32 val; + int i; + + /* set up tx completion writeback registers. must be 8-byte aligned */ +#ifdef USE_TX_COMPWB + off = offsetof(struct cas_init_block, tx_compwb); + writel((desc_dma + off) >> 32, cp->regs + REG_TX_COMPWB_DB_HI); + writel((desc_dma + off) & 0xffffffff, cp->regs + REG_TX_COMPWB_DB_LOW); +#endif + + /* enable completion writebacks, enable paced mode, + * disable read pipe, and disable pre-interrupt compwbs + */ + val = TX_CFG_COMPWB_Q1 | TX_CFG_COMPWB_Q2 | + TX_CFG_COMPWB_Q3 | TX_CFG_COMPWB_Q4 | + TX_CFG_DMA_RDPIPE_DIS | TX_CFG_PACED_MODE | + TX_CFG_INTR_COMPWB_DIS; + + /* write out tx ring info and tx desc bases */ + for (i = 0; i < MAX_TX_RINGS; i++) { + off = (unsigned long) cp->init_txds[i] - + (unsigned long) cp->init_block; + + val |= CAS_TX_RINGN_BASE(i); + writel((desc_dma + off) >> 32, cp->regs + REG_TX_DBN_HI(i)); + writel((desc_dma + off) & 0xffffffff, cp->regs + + REG_TX_DBN_LOW(i)); + /* don't zero out the kick register here as the system + * will wedge + */ + } + writel(val, cp->regs + REG_TX_CFG); + + /* program max burst sizes. these numbers should be different + * if doing QoS. + */ +#ifdef USE_QOS + writel(0x800, cp->regs + REG_TX_MAXBURST_0); + writel(0x1600, cp->regs + REG_TX_MAXBURST_1); + writel(0x2400, cp->regs + REG_TX_MAXBURST_2); + writel(0x4800, cp->regs + REG_TX_MAXBURST_3); +#else + writel(0x800, cp->regs + REG_TX_MAXBURST_0); + writel(0x800, cp->regs + REG_TX_MAXBURST_1); + writel(0x800, cp->regs + REG_TX_MAXBURST_2); + writel(0x800, cp->regs + REG_TX_MAXBURST_3); +#endif +} + +/* Must be invoked under cp->lock. */ +static inline void cas_init_dma(struct cas *cp) +{ + cas_init_tx_dma(cp); + cas_init_rx_dma(cp); +} + +/* Must be invoked under cp->lock. */ +static u32 cas_setup_multicast(struct cas *cp) +{ + u32 rxcfg = 0; + int i; + + if (cp->dev->flags & IFF_PROMISC) { + rxcfg |= MAC_RX_CFG_PROMISC_EN; + + } else if (cp->dev->flags & IFF_ALLMULTI) { + for (i=0; i < 16; i++) + writel(0xFFFF, cp->regs + REG_MAC_HASH_TABLEN(i)); + rxcfg |= MAC_RX_CFG_HASH_FILTER_EN; + + } else { + u16 hash_table[16]; + u32 crc; + struct dev_mc_list *dmi = cp->dev->mc_list; + int i; + + /* use the alternate mac address registers for the + * first 15 multicast addresses + */ + for (i = 1; i <= CAS_MC_EXACT_MATCH_SIZE; i++) { + if (!dmi) { + writel(0x0, cp->regs + REG_MAC_ADDRN(i*3 + 0)); + writel(0x0, cp->regs + REG_MAC_ADDRN(i*3 + 1)); + writel(0x0, cp->regs + REG_MAC_ADDRN(i*3 + 2)); + continue; + } + writel((dmi->dmi_addr[4] << 8) | dmi->dmi_addr[5], + cp->regs + REG_MAC_ADDRN(i*3 + 0)); + writel((dmi->dmi_addr[2] << 8) | dmi->dmi_addr[3], + cp->regs + REG_MAC_ADDRN(i*3 + 1)); + writel((dmi->dmi_addr[0] << 8) | dmi->dmi_addr[1], + cp->regs + REG_MAC_ADDRN(i*3 + 2)); + dmi = dmi->next; + } + + /* use hw hash table for the next series of + * multicast addresses + */ + memset(hash_table, 0, sizeof(hash_table)); + while (dmi) { + crc = ether_crc_le(ETH_ALEN, dmi->dmi_addr); + crc >>= 24; + hash_table[crc >> 4] |= 1 << (15 - (crc & 0xf)); + dmi = dmi->next; + } + for (i=0; i < 16; i++) + writel(hash_table[i], cp->regs + + REG_MAC_HASH_TABLEN(i)); + rxcfg |= MAC_RX_CFG_HASH_FILTER_EN; + } + + return rxcfg; +} + +/* must be invoked under cp->stat_lock[N_TX_RINGS] */ +static void cas_clear_mac_err(struct cas *cp) +{ + writel(0, cp->regs + REG_MAC_COLL_NORMAL); + writel(0, cp->regs + REG_MAC_COLL_FIRST); + writel(0, cp->regs + REG_MAC_COLL_EXCESS); + writel(0, cp->regs + REG_MAC_COLL_LATE); + writel(0, cp->regs + REG_MAC_TIMER_DEFER); + writel(0, cp->regs + REG_MAC_ATTEMPTS_PEAK); + writel(0, cp->regs + REG_MAC_RECV_FRAME); + writel(0, cp->regs + REG_MAC_LEN_ERR); + writel(0, cp->regs + REG_MAC_ALIGN_ERR); + writel(0, cp->regs + REG_MAC_FCS_ERR); + writel(0, cp->regs + REG_MAC_RX_CODE_ERR); +} + + +static void cas_mac_reset(struct cas *cp) +{ + int i; + + /* do both TX and RX reset */ + writel(0x1, cp->regs + REG_MAC_TX_RESET); + writel(0x1, cp->regs + REG_MAC_RX_RESET); + + /* wait for TX */ + i = STOP_TRIES; + while (i-- > 0) { + if (readl(cp->regs + REG_MAC_TX_RESET) == 0) + break; + udelay(10); + } + + /* wait for RX */ + i = STOP_TRIES; + while (i-- > 0) { + if (readl(cp->regs + REG_MAC_RX_RESET) == 0) + break; + udelay(10); + } + + if (readl(cp->regs + REG_MAC_TX_RESET) | + readl(cp->regs + REG_MAC_RX_RESET)) + printk(KERN_ERR "%s: mac tx[%d]/rx[%d] reset failed [%08x]\n", + cp->dev->name, readl(cp->regs + REG_MAC_TX_RESET), + readl(cp->regs + REG_MAC_RX_RESET), + readl(cp->regs + REG_MAC_STATE_MACHINE)); +} + + +/* Must be invoked under cp->lock. */ +static void cas_init_mac(struct cas *cp) +{ + unsigned char *e = &cp->dev->dev_addr[0]; + int i; +#ifdef CONFIG_CASSINI_MULTICAST_REG_WRITE + u32 rxcfg; +#endif + cas_mac_reset(cp); + + /* setup core arbitration weight register */ + writel(CAWR_RR_DIS, cp->regs + REG_CAWR); + + /* XXX Use pci_dma_burst_advice() */ +#if !defined(CONFIG_SPARC64) && !defined(CONFIG_ALPHA) + /* set the infinite burst register for chips that don't have + * pci issues. + */ + if ((cp->cas_flags & CAS_FLAG_TARGET_ABORT) == 0) + writel(INF_BURST_EN, cp->regs + REG_INF_BURST); +#endif + + writel(0x1BF0, cp->regs + REG_MAC_SEND_PAUSE); + + writel(0x00, cp->regs + REG_MAC_IPG0); + writel(0x08, cp->regs + REG_MAC_IPG1); + writel(0x04, cp->regs + REG_MAC_IPG2); + + /* change later for 802.3z */ + writel(0x40, cp->regs + REG_MAC_SLOT_TIME); + + /* min frame + FCS */ + writel(ETH_ZLEN + 4, cp->regs + REG_MAC_FRAMESIZE_MIN); + + /* Ethernet payload + header + FCS + optional VLAN tag. NOTE: we + * specify the maximum frame size to prevent RX tag errors on + * oversized frames. + */ + writel(CAS_BASE(MAC_FRAMESIZE_MAX_BURST, 0x2000) | + CAS_BASE(MAC_FRAMESIZE_MAX_FRAME, + (CAS_MAX_MTU + ETH_HLEN + 4 + 4)), + cp->regs + REG_MAC_FRAMESIZE_MAX); + + /* NOTE: crc_size is used as a surrogate for half-duplex. + * workaround saturn half-duplex issue by increasing preamble + * size to 65 bytes. + */ + if ((cp->cas_flags & CAS_FLAG_SATURN) && cp->crc_size) + writel(0x41, cp->regs + REG_MAC_PA_SIZE); + else + writel(0x07, cp->regs + REG_MAC_PA_SIZE); + writel(0x04, cp->regs + REG_MAC_JAM_SIZE); + writel(0x10, cp->regs + REG_MAC_ATTEMPT_LIMIT); + writel(0x8808, cp->regs + REG_MAC_CTRL_TYPE); + + writel((e[5] | (e[4] << 8)) & 0x3ff, cp->regs + REG_MAC_RANDOM_SEED); + + writel(0, cp->regs + REG_MAC_ADDR_FILTER0); + writel(0, cp->regs + REG_MAC_ADDR_FILTER1); + writel(0, cp->regs + REG_MAC_ADDR_FILTER2); + writel(0, cp->regs + REG_MAC_ADDR_FILTER2_1_MASK); + writel(0, cp->regs + REG_MAC_ADDR_FILTER0_MASK); + + /* setup mac address in perfect filter array */ + for (i = 0; i < 45; i++) + writel(0x0, cp->regs + REG_MAC_ADDRN(i)); + + writel((e[4] << 8) | e[5], cp->regs + REG_MAC_ADDRN(0)); + writel((e[2] << 8) | e[3], cp->regs + REG_MAC_ADDRN(1)); + writel((e[0] << 8) | e[1], cp->regs + REG_MAC_ADDRN(2)); + + writel(0x0001, cp->regs + REG_MAC_ADDRN(42)); + writel(0xc200, cp->regs + REG_MAC_ADDRN(43)); + writel(0x0180, cp->regs + REG_MAC_ADDRN(44)); + +#ifndef CONFIG_CASSINI_MULTICAST_REG_WRITE + cp->mac_rx_cfg = cas_setup_multicast(cp); +#else + /* WTZ: Do what Adrian did in cas_set_multicast. Doing + * a writel does not seem to be necessary because Cassini + * seems to preserve the configuration when we do the reset. + * If the chip is in trouble, though, it is not clear if we + * can really count on this behavior. cas_set_multicast uses + * spin_lock_irqsave, but we are called only in cas_init_hw and + * cas_init_hw is protected by cas_lock_all, which calls + * spin_lock_irq (so it doesn't need to save the flags, and + * we should be OK for the writel, as that is the only + * difference). + */ + cp->mac_rx_cfg = rxcfg = cas_setup_multicast(cp); + writel(rxcfg, cp->regs + REG_MAC_RX_CFG); +#endif + spin_lock(&cp->stat_lock[N_TX_RINGS]); + cas_clear_mac_err(cp); + spin_unlock(&cp->stat_lock[N_TX_RINGS]); + + /* Setup MAC interrupts. We want to get all of the interesting + * counter expiration events, but we do not want to hear about + * normal rx/tx as the DMA engine tells us that. + */ + writel(MAC_TX_FRAME_XMIT, cp->regs + REG_MAC_TX_MASK); + writel(MAC_RX_FRAME_RECV, cp->regs + REG_MAC_RX_MASK); + + /* Don't enable even the PAUSE interrupts for now, we + * make no use of those events other than to record them. + */ + writel(0xffffffff, cp->regs + REG_MAC_CTRL_MASK); +} + +/* Must be invoked under cp->lock. */ +static void cas_init_pause_thresholds(struct cas *cp) +{ + /* Calculate pause thresholds. Setting the OFF threshold to the + * full RX fifo size effectively disables PAUSE generation + */ + if (cp->rx_fifo_size <= (2 * 1024)) { + cp->rx_pause_off = cp->rx_pause_on = cp->rx_fifo_size; + } else { + int max_frame = (cp->dev->mtu + ETH_HLEN + 4 + 4 + 64) & ~63; + if (max_frame * 3 > cp->rx_fifo_size) { + cp->rx_pause_off = 7104; + cp->rx_pause_on = 960; + } else { + int off = (cp->rx_fifo_size - (max_frame * 2)); + int on = off - max_frame; + cp->rx_pause_off = off; + cp->rx_pause_on = on; + } + } +} + +static int cas_vpd_match(const void __iomem *p, const char *str) +{ + int len = strlen(str) + 1; + int i; + + for (i = 0; i < len; i++) { + if (readb(p + i) != str[i]) + return 0; + } + return 1; +} + + +/* get the mac address by reading the vpd information in the rom. + * also get the phy type and determine if there's an entropy generator. + * NOTE: this is a bit convoluted for the following reasons: + * 1) vpd info has order-dependent mac addresses for multinic cards + * 2) the only way to determine the nic order is to use the slot + * number. + * 3) fiber cards don't have bridges, so their slot numbers don't + * mean anything. + * 4) we don't actually know we have a fiber card until after + * the mac addresses are parsed. + */ +static int cas_get_vpd_info(struct cas *cp, unsigned char *dev_addr, + const int offset) +{ + void __iomem *p = cp->regs + REG_EXPANSION_ROM_RUN_START; + void __iomem *base, *kstart; + int i, len; + int found = 0; +#define VPD_FOUND_MAC 0x01 +#define VPD_FOUND_PHY 0x02 + + int phy_type = CAS_PHY_MII_MDIO0; /* default phy type */ + int mac_off = 0; + + /* give us access to the PROM */ + writel(BIM_LOCAL_DEV_PROM | BIM_LOCAL_DEV_PAD, + cp->regs + REG_BIM_LOCAL_DEV_EN); + + /* check for an expansion rom */ + if (readb(p) != 0x55 || readb(p + 1) != 0xaa) + goto use_random_mac_addr; + + /* search for beginning of vpd */ + base = NULL; + for (i = 2; i < EXPANSION_ROM_SIZE; i++) { + /* check for PCIR */ + if ((readb(p + i + 0) == 0x50) && + (readb(p + i + 1) == 0x43) && + (readb(p + i + 2) == 0x49) && + (readb(p + i + 3) == 0x52)) { + base = p + (readb(p + i + 8) | + (readb(p + i + 9) << 8)); + break; + } + } + + if (!base || (readb(base) != 0x82)) + goto use_random_mac_addr; + + i = (readb(base + 1) | (readb(base + 2) << 8)) + 3; + while (i < EXPANSION_ROM_SIZE) { + if (readb(base + i) != 0x90) /* no vpd found */ + goto use_random_mac_addr; + + /* found a vpd field */ + len = readb(base + i + 1) | (readb(base + i + 2) << 8); + + /* extract keywords */ + kstart = base + i + 3; + p = kstart; + while ((p - kstart) < len) { + int klen = readb(p + 2); + int j; + char type; + + p += 3; + + /* look for the following things: + * -- correct length == 29 + * 3 (type) + 2 (size) + + * 18 (strlen("local-mac-address") + 1) + + * 6 (mac addr) + * -- VPD Instance 'I' + * -- VPD Type Bytes 'B' + * -- VPD data length == 6 + * -- property string == local-mac-address + * + * -- correct length == 24 + * 3 (type) + 2 (size) + + * 12 (strlen("entropy-dev") + 1) + + * 7 (strlen("vms110") + 1) + * -- VPD Instance 'I' + * -- VPD Type String 'B' + * -- VPD data length == 7 + * -- property string == entropy-dev + * + * -- correct length == 18 + * 3 (type) + 2 (size) + + * 9 (strlen("phy-type") + 1) + + * 4 (strlen("pcs") + 1) + * -- VPD Instance 'I' + * -- VPD Type String 'S' + * -- VPD data length == 4 + * -- property string == phy-type + * + * -- correct length == 23 + * 3 (type) + 2 (size) + + * 14 (strlen("phy-interface") + 1) + + * 4 (strlen("pcs") + 1) + * -- VPD Instance 'I' + * -- VPD Type String 'S' + * -- VPD data length == 4 + * -- property string == phy-interface + */ + if (readb(p) != 'I') + goto next; + + /* finally, check string and length */ + type = readb(p + 3); + if (type == 'B') { + if ((klen == 29) && readb(p + 4) == 6 && + cas_vpd_match(p + 5, + "local-mac-address")) { + if (mac_off++ > offset) + goto next; + + /* set mac address */ + for (j = 0; j < 6; j++) + dev_addr[j] = + readb(p + 23 + j); + goto found_mac; + } + } + + if (type != 'S') + goto next; + +#ifdef USE_ENTROPY_DEV + if ((klen == 24) && + cas_vpd_match(p + 5, "entropy-dev") && + cas_vpd_match(p + 17, "vms110")) { + cp->cas_flags |= CAS_FLAG_ENTROPY_DEV; + goto next; + } +#endif + + if (found & VPD_FOUND_PHY) + goto next; + + if ((klen == 18) && readb(p + 4) == 4 && + cas_vpd_match(p + 5, "phy-type")) { + if (cas_vpd_match(p + 14, "pcs")) { + phy_type = CAS_PHY_SERDES; + goto found_phy; + } + } + + if ((klen == 23) && readb(p + 4) == 4 && + cas_vpd_match(p + 5, "phy-interface")) { + if (cas_vpd_match(p + 19, "pcs")) { + phy_type = CAS_PHY_SERDES; + goto found_phy; + } + } +found_mac: + found |= VPD_FOUND_MAC; + goto next; + +found_phy: + found |= VPD_FOUND_PHY; + +next: + p += klen; + } + i += len + 3; + } + +use_random_mac_addr: + if (found & VPD_FOUND_MAC) + goto done; + + /* Sun MAC prefix then 3 random bytes. */ + printk(PFX "MAC address not found in ROM VPD\n"); + dev_addr[0] = 0x08; + dev_addr[1] = 0x00; + dev_addr[2] = 0x20; + get_random_bytes(dev_addr + 3, 3); + +done: + writel(0, cp->regs + REG_BIM_LOCAL_DEV_EN); + return phy_type; +} + +/* check pci invariants */ +static void cas_check_pci_invariants(struct cas *cp) +{ + struct pci_dev *pdev = cp->pdev; + u8 rev; + + cp->cas_flags = 0; + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + if ((pdev->vendor == PCI_VENDOR_ID_SUN) && + (pdev->device == PCI_DEVICE_ID_SUN_CASSINI)) { + if (rev >= CAS_ID_REVPLUS) + cp->cas_flags |= CAS_FLAG_REG_PLUS; + if (rev < CAS_ID_REVPLUS02u) + cp->cas_flags |= CAS_FLAG_TARGET_ABORT; + + /* Original Cassini supports HW CSUM, but it's not + * enabled by default as it can trigger TX hangs. + */ + if (rev < CAS_ID_REV2) + cp->cas_flags |= CAS_FLAG_NO_HW_CSUM; + } else { + /* Only sun has original cassini chips. */ + cp->cas_flags |= CAS_FLAG_REG_PLUS; + + /* We use a flag because the same phy might be externally + * connected. + */ + if ((pdev->vendor == PCI_VENDOR_ID_NS) && + (pdev->device == PCI_DEVICE_ID_NS_SATURN)) + cp->cas_flags |= CAS_FLAG_SATURN; + } +} + + +static int cas_check_invariants(struct cas *cp) +{ + struct pci_dev *pdev = cp->pdev; + u32 cfg; + int i; + + /* get page size for rx buffers. */ + cp->page_order = 0; +#ifdef USE_PAGE_ORDER + if (PAGE_SHIFT < CAS_JUMBO_PAGE_SHIFT) { + /* see if we can allocate larger pages */ + struct page *page = alloc_pages(GFP_ATOMIC, + CAS_JUMBO_PAGE_SHIFT - + PAGE_SHIFT); + if (page) { + __free_pages(page, CAS_JUMBO_PAGE_SHIFT - PAGE_SHIFT); + cp->page_order = CAS_JUMBO_PAGE_SHIFT - PAGE_SHIFT; + } else { + printk(PFX "MTU limited to %d bytes\n", CAS_MAX_MTU); + } + } +#endif + cp->page_size = (PAGE_SIZE << cp->page_order); + + /* Fetch the FIFO configurations. */ + cp->tx_fifo_size = readl(cp->regs + REG_TX_FIFO_SIZE) * 64; + cp->rx_fifo_size = RX_FIFO_SIZE; + + /* finish phy determination. MDIO1 takes precedence over MDIO0 if + * they're both connected. + */ + cp->phy_type = cas_get_vpd_info(cp, cp->dev->dev_addr, + PCI_SLOT(pdev->devfn)); + if (cp->phy_type & CAS_PHY_SERDES) { + cp->cas_flags |= CAS_FLAG_1000MB_CAP; + return 0; /* no more checking needed */ + } + + /* MII */ + cfg = readl(cp->regs + REG_MIF_CFG); + if (cfg & MIF_CFG_MDIO_1) { + cp->phy_type = CAS_PHY_MII_MDIO1; + } else if (cfg & MIF_CFG_MDIO_0) { + cp->phy_type = CAS_PHY_MII_MDIO0; + } + + cas_mif_poll(cp, 0); + writel(PCS_DATAPATH_MODE_MII, cp->regs + REG_PCS_DATAPATH_MODE); + + for (i = 0; i < 32; i++) { + u32 phy_id; + int j; + + for (j = 0; j < 3; j++) { + cp->phy_addr = i; + phy_id = cas_phy_read(cp, MII_PHYSID1) << 16; + phy_id |= cas_phy_read(cp, MII_PHYSID2); + if (phy_id && (phy_id != 0xFFFFFFFF)) { + cp->phy_id = phy_id; + goto done; + } + } + } + printk(KERN_ERR PFX "MII phy did not respond [%08x]\n", + readl(cp->regs + REG_MIF_STATE_MACHINE)); + return -1; + +done: + /* see if we can do gigabit */ + cfg = cas_phy_read(cp, MII_BMSR); + if ((cfg & CAS_BMSR_1000_EXTEND) && + cas_phy_read(cp, CAS_MII_1000_EXTEND)) + cp->cas_flags |= CAS_FLAG_1000MB_CAP; + return 0; +} + +/* Must be invoked under cp->lock. */ +static inline void cas_start_dma(struct cas *cp) +{ + int i; + u32 val; + int txfailed = 0; + + /* enable dma */ + val = readl(cp->regs + REG_TX_CFG) | TX_CFG_DMA_EN; + writel(val, cp->regs + REG_TX_CFG); + val = readl(cp->regs + REG_RX_CFG) | RX_CFG_DMA_EN; + writel(val, cp->regs + REG_RX_CFG); + + /* enable the mac */ + val = readl(cp->regs + REG_MAC_TX_CFG) | MAC_TX_CFG_EN; + writel(val, cp->regs + REG_MAC_TX_CFG); + val = readl(cp->regs + REG_MAC_RX_CFG) | MAC_RX_CFG_EN; + writel(val, cp->regs + REG_MAC_RX_CFG); + + i = STOP_TRIES; + while (i-- > 0) { + val = readl(cp->regs + REG_MAC_TX_CFG); + if ((val & MAC_TX_CFG_EN)) + break; + udelay(10); + } + if (i < 0) txfailed = 1; + i = STOP_TRIES; + while (i-- > 0) { + val = readl(cp->regs + REG_MAC_RX_CFG); + if ((val & MAC_RX_CFG_EN)) { + if (txfailed) { + printk(KERN_ERR + "%s: enabling mac failed [tx:%08x:%08x].\n", + cp->dev->name, + readl(cp->regs + REG_MIF_STATE_MACHINE), + readl(cp->regs + REG_MAC_STATE_MACHINE)); + } + goto enable_rx_done; + } + udelay(10); + } + printk(KERN_ERR "%s: enabling mac failed [%s:%08x:%08x].\n", + cp->dev->name, + (txfailed? "tx,rx":"rx"), + readl(cp->regs + REG_MIF_STATE_MACHINE), + readl(cp->regs + REG_MAC_STATE_MACHINE)); + +enable_rx_done: + cas_unmask_intr(cp); /* enable interrupts */ + writel(RX_DESC_RINGN_SIZE(0) - 4, cp->regs + REG_RX_KICK); + writel(0, cp->regs + REG_RX_COMP_TAIL); + + if (cp->cas_flags & CAS_FLAG_REG_PLUS) { + if (N_RX_DESC_RINGS > 1) + writel(RX_DESC_RINGN_SIZE(1) - 4, + cp->regs + REG_PLUS_RX_KICK1); + + for (i = 1; i < N_RX_COMP_RINGS; i++) + writel(0, cp->regs + REG_PLUS_RX_COMPN_TAIL(i)); + } +} + +/* Must be invoked under cp->lock. */ +static void cas_read_pcs_link_mode(struct cas *cp, int *fd, int *spd, + int *pause) +{ + u32 val = readl(cp->regs + REG_PCS_MII_LPA); + *fd = (val & PCS_MII_LPA_FD) ? 1 : 0; + *pause = (val & PCS_MII_LPA_SYM_PAUSE) ? 0x01 : 0x00; + if (val & PCS_MII_LPA_ASYM_PAUSE) + *pause |= 0x10; + *spd = 1000; +} + +/* Must be invoked under cp->lock. */ +static void cas_read_mii_link_mode(struct cas *cp, int *fd, int *spd, + int *pause) +{ + u32 val; + + *fd = 0; + *spd = 10; + *pause = 0; + + /* use GMII registers */ + val = cas_phy_read(cp, MII_LPA); + if (val & CAS_LPA_PAUSE) + *pause = 0x01; + + if (val & CAS_LPA_ASYM_PAUSE) + *pause |= 0x10; + + if (val & LPA_DUPLEX) + *fd = 1; + if (val & LPA_100) + *spd = 100; + + if (cp->cas_flags & CAS_FLAG_1000MB_CAP) { + val = cas_phy_read(cp, CAS_MII_1000_STATUS); + if (val & (CAS_LPA_1000FULL | CAS_LPA_1000HALF)) + *spd = 1000; + if (val & CAS_LPA_1000FULL) + *fd = 1; + } +} + +/* A link-up condition has occurred, initialize and enable the + * rest of the chip. + * + * Must be invoked under cp->lock. + */ +static void cas_set_link_modes(struct cas *cp) +{ + u32 val; + int full_duplex, speed, pause; + + full_duplex = 0; + speed = 10; + pause = 0; + + if (CAS_PHY_MII(cp->phy_type)) { + cas_mif_poll(cp, 0); + val = cas_phy_read(cp, MII_BMCR); + if (val & BMCR_ANENABLE) { + cas_read_mii_link_mode(cp, &full_duplex, &speed, + &pause); + } else { + if (val & BMCR_FULLDPLX) + full_duplex = 1; + + if (val & BMCR_SPEED100) + speed = 100; + else if (val & CAS_BMCR_SPEED1000) + speed = (cp->cas_flags & CAS_FLAG_1000MB_CAP) ? + 1000 : 100; + } + cas_mif_poll(cp, 1); + + } else { + val = readl(cp->regs + REG_PCS_MII_CTRL); + cas_read_pcs_link_mode(cp, &full_duplex, &speed, &pause); + if ((val & PCS_MII_AUTONEG_EN) == 0) { + if (val & PCS_MII_CTRL_DUPLEX) + full_duplex = 1; + } + } + + if (netif_msg_link(cp)) + printk(KERN_INFO "%s: Link up at %d Mbps, %s-duplex.\n", + cp->dev->name, speed, (full_duplex ? "full" : "half")); + + val = MAC_XIF_TX_MII_OUTPUT_EN | MAC_XIF_LINK_LED; + if (CAS_PHY_MII(cp->phy_type)) { + val |= MAC_XIF_MII_BUFFER_OUTPUT_EN; + if (!full_duplex) + val |= MAC_XIF_DISABLE_ECHO; + } + if (full_duplex) + val |= MAC_XIF_FDPLX_LED; + if (speed == 1000) + val |= MAC_XIF_GMII_MODE; + writel(val, cp->regs + REG_MAC_XIF_CFG); + + /* deal with carrier and collision detect. */ + val = MAC_TX_CFG_IPG_EN; + if (full_duplex) { + val |= MAC_TX_CFG_IGNORE_CARRIER; + val |= MAC_TX_CFG_IGNORE_COLL; + } else { +#ifndef USE_CSMA_CD_PROTO + val |= MAC_TX_CFG_NEVER_GIVE_UP_EN; + val |= MAC_TX_CFG_NEVER_GIVE_UP_LIM; +#endif + } + /* val now set up for REG_MAC_TX_CFG */ + + /* If gigabit and half-duplex, enable carrier extension + * mode. increase slot time to 512 bytes as well. + * else, disable it and make sure slot time is 64 bytes. + * also activate checksum bug workaround + */ + if ((speed == 1000) && !full_duplex) { + writel(val | MAC_TX_CFG_CARRIER_EXTEND, + cp->regs + REG_MAC_TX_CFG); + + val = readl(cp->regs + REG_MAC_RX_CFG); + val &= ~MAC_RX_CFG_STRIP_FCS; /* checksum workaround */ + writel(val | MAC_RX_CFG_CARRIER_EXTEND, + cp->regs + REG_MAC_RX_CFG); + + writel(0x200, cp->regs + REG_MAC_SLOT_TIME); + + cp->crc_size = 4; + /* minimum size gigabit frame at half duplex */ + cp->min_frame_size = CAS_1000MB_MIN_FRAME; + + } else { + writel(val, cp->regs + REG_MAC_TX_CFG); + + /* checksum bug workaround. don't strip FCS when in + * half-duplex mode + */ + val = readl(cp->regs + REG_MAC_RX_CFG); + if (full_duplex) { + val |= MAC_RX_CFG_STRIP_FCS; + cp->crc_size = 0; + cp->min_frame_size = CAS_MIN_MTU; + } else { + val &= ~MAC_RX_CFG_STRIP_FCS; + cp->crc_size = 4; + cp->min_frame_size = CAS_MIN_FRAME; + } + writel(val & ~MAC_RX_CFG_CARRIER_EXTEND, + cp->regs + REG_MAC_RX_CFG); + writel(0x40, cp->regs + REG_MAC_SLOT_TIME); + } + + if (netif_msg_link(cp)) { + if (pause & 0x01) { + printk(KERN_INFO "%s: Pause is enabled " + "(rxfifo: %d off: %d on: %d)\n", + cp->dev->name, + cp->rx_fifo_size, + cp->rx_pause_off, + cp->rx_pause_on); + } else if (pause & 0x10) { + printk(KERN_INFO "%s: TX pause enabled\n", + cp->dev->name); + } else { + printk(KERN_INFO "%s: Pause is disabled\n", + cp->dev->name); + } + } + + val = readl(cp->regs + REG_MAC_CTRL_CFG); + val &= ~(MAC_CTRL_CFG_SEND_PAUSE_EN | MAC_CTRL_CFG_RECV_PAUSE_EN); + if (pause) { /* symmetric or asymmetric pause */ + val |= MAC_CTRL_CFG_SEND_PAUSE_EN; + if (pause & 0x01) { /* symmetric pause */ + val |= MAC_CTRL_CFG_RECV_PAUSE_EN; + } + } + writel(val, cp->regs + REG_MAC_CTRL_CFG); + cas_start_dma(cp); +} + +/* Must be invoked under cp->lock. */ +static void cas_init_hw(struct cas *cp, int restart_link) +{ + if (restart_link) + cas_phy_init(cp); + + cas_init_pause_thresholds(cp); + cas_init_mac(cp); + cas_init_dma(cp); + + if (restart_link) { + /* Default aneg parameters */ + cp->timer_ticks = 0; + cas_begin_auto_negotiation(cp, NULL); + } else if (cp->lstate == link_up) { + cas_set_link_modes(cp); + netif_carrier_on(cp->dev); + } +} + +/* Must be invoked under cp->lock. on earlier cassini boards, + * SOFT_0 is tied to PCI reset. we use this to force a pci reset, + * let it settle out, and then restore pci state. + */ +static void cas_hard_reset(struct cas *cp) +{ + writel(BIM_LOCAL_DEV_SOFT_0, cp->regs + REG_BIM_LOCAL_DEV_EN); + udelay(20); + pci_restore_state(cp->pdev); +} + + +static void cas_global_reset(struct cas *cp, int blkflag) +{ + int limit; + + /* issue a global reset. don't use RSTOUT. */ + if (blkflag && !CAS_PHY_MII(cp->phy_type)) { + /* For PCS, when the blkflag is set, we should set the + * SW_REST_BLOCK_PCS_SLINK bit to prevent the results of + * the last autonegotiation from being cleared. We'll + * need some special handling if the chip is set into a + * loopback mode. + */ + writel((SW_RESET_TX | SW_RESET_RX | SW_RESET_BLOCK_PCS_SLINK), + cp->regs + REG_SW_RESET); + } else { + writel(SW_RESET_TX | SW_RESET_RX, cp->regs + REG_SW_RESET); + } + + /* need to wait at least 3ms before polling register */ + mdelay(3); + + limit = STOP_TRIES; + while (limit-- > 0) { + u32 val = readl(cp->regs + REG_SW_RESET); + if ((val & (SW_RESET_TX | SW_RESET_RX)) == 0) + goto done; + udelay(10); + } + printk(KERN_ERR "%s: sw reset failed.\n", cp->dev->name); + +done: + /* enable various BIM interrupts */ + writel(BIM_CFG_DPAR_INTR_ENABLE | BIM_CFG_RMA_INTR_ENABLE | + BIM_CFG_RTA_INTR_ENABLE, cp->regs + REG_BIM_CFG); + + /* clear out pci error status mask for handled errors. + * we don't deal with DMA counter overflows as they happen + * all the time. + */ + writel(0xFFFFFFFFU & ~(PCI_ERR_BADACK | PCI_ERR_DTRTO | + PCI_ERR_OTHER | PCI_ERR_BIM_DMA_WRITE | + PCI_ERR_BIM_DMA_READ), cp->regs + + REG_PCI_ERR_STATUS_MASK); + + /* set up for MII by default to address mac rx reset timeout + * issue + */ + writel(PCS_DATAPATH_MODE_MII, cp->regs + REG_PCS_DATAPATH_MODE); +} + +static void cas_reset(struct cas *cp, int blkflag) +{ + u32 val; + + cas_mask_intr(cp); + cas_global_reset(cp, blkflag); + cas_mac_reset(cp); + cas_entropy_reset(cp); + + /* disable dma engines. */ + val = readl(cp->regs + REG_TX_CFG); + val &= ~TX_CFG_DMA_EN; + writel(val, cp->regs + REG_TX_CFG); + + val = readl(cp->regs + REG_RX_CFG); + val &= ~RX_CFG_DMA_EN; + writel(val, cp->regs + REG_RX_CFG); + + /* program header parser */ + if ((cp->cas_flags & CAS_FLAG_TARGET_ABORT) || + (CAS_HP_ALT_FIRMWARE == cas_prog_null)) { + cas_load_firmware(cp, CAS_HP_FIRMWARE); + } else { + cas_load_firmware(cp, CAS_HP_ALT_FIRMWARE); + } + + /* clear out error registers */ + spin_lock(&cp->stat_lock[N_TX_RINGS]); + cas_clear_mac_err(cp); + spin_unlock(&cp->stat_lock[N_TX_RINGS]); +} + +/* Shut down the chip, must be called with pm_sem held. */ +static void cas_shutdown(struct cas *cp) +{ + unsigned long flags; + + /* Make us not-running to avoid timers respawning */ + cp->hw_running = 0; + + del_timer_sync(&cp->link_timer); + + /* Stop the reset task */ +#if 0 + while (atomic_read(&cp->reset_task_pending_mtu) || + atomic_read(&cp->reset_task_pending_spare) || + atomic_read(&cp->reset_task_pending_all)) + schedule(); + +#else + while (atomic_read(&cp->reset_task_pending)) + schedule(); +#endif + /* Actually stop the chip */ + cas_lock_all_save(cp, flags); + cas_reset(cp, 0); + if (cp->cas_flags & CAS_FLAG_SATURN) + cas_phy_powerdown(cp); + cas_unlock_all_restore(cp, flags); +} + +static int cas_change_mtu(struct net_device *dev, int new_mtu) +{ + struct cas *cp = netdev_priv(dev); + + if (new_mtu < CAS_MIN_MTU || new_mtu > CAS_MAX_MTU) + return -EINVAL; + + dev->mtu = new_mtu; + if (!netif_running(dev) || !netif_device_present(dev)) + return 0; + + /* let the reset task handle it */ +#if 1 + atomic_inc(&cp->reset_task_pending); + if ((cp->phy_type & CAS_PHY_SERDES)) { + atomic_inc(&cp->reset_task_pending_all); + } else { + atomic_inc(&cp->reset_task_pending_mtu); + } + schedule_work(&cp->reset_task); +#else + atomic_set(&cp->reset_task_pending, (cp->phy_type & CAS_PHY_SERDES) ? + CAS_RESET_ALL : CAS_RESET_MTU); + printk(KERN_ERR "reset called in cas_change_mtu\n"); + schedule_work(&cp->reset_task); +#endif + + flush_scheduled_work(); + return 0; +} + +static void cas_clean_txd(struct cas *cp, int ring) +{ + struct cas_tx_desc *txd = cp->init_txds[ring]; + struct sk_buff *skb, **skbs = cp->tx_skbs[ring]; + u64 daddr, dlen; + int i, size; + + size = TX_DESC_RINGN_SIZE(ring); + for (i = 0; i < size; i++) { + int frag; + + if (skbs[i] == NULL) + continue; + + skb = skbs[i]; + skbs[i] = NULL; + + for (frag = 0; frag <= skb_shinfo(skb)->nr_frags; frag++) { + int ent = i & (size - 1); + + /* first buffer is never a tiny buffer and so + * needs to be unmapped. + */ + daddr = le64_to_cpu(txd[ent].buffer); + dlen = CAS_VAL(TX_DESC_BUFLEN, + le64_to_cpu(txd[ent].control)); + pci_unmap_page(cp->pdev, daddr, dlen, + PCI_DMA_TODEVICE); + + if (frag != skb_shinfo(skb)->nr_frags) { + i++; + + /* next buffer might by a tiny buffer. + * skip past it. + */ + ent = i & (size - 1); + if (cp->tx_tiny_use[ring][ent].used) + i++; + } + } + dev_kfree_skb_any(skb); + } + + /* zero out tiny buf usage */ + memset(cp->tx_tiny_use[ring], 0, size*sizeof(*cp->tx_tiny_use[ring])); +} + +/* freed on close */ +static inline void cas_free_rx_desc(struct cas *cp, int ring) +{ + cas_page_t **page = cp->rx_pages[ring]; + int i, size; + + size = RX_DESC_RINGN_SIZE(ring); + for (i = 0; i < size; i++) { + if (page[i]) { + cas_page_free(cp, page[i]); + page[i] = NULL; + } + } +} + +static void cas_free_rxds(struct cas *cp) +{ + int i; + + for (i = 0; i < N_RX_DESC_RINGS; i++) + cas_free_rx_desc(cp, i); +} + +/* Must be invoked under cp->lock. */ +static void cas_clean_rings(struct cas *cp) +{ + int i; + + /* need to clean all tx rings */ + memset(cp->tx_old, 0, sizeof(*cp->tx_old)*N_TX_RINGS); + memset(cp->tx_new, 0, sizeof(*cp->tx_new)*N_TX_RINGS); + for (i = 0; i < N_TX_RINGS; i++) + cas_clean_txd(cp, i); + + /* zero out init block */ + memset(cp->init_block, 0, sizeof(struct cas_init_block)); + cas_clean_rxds(cp); + cas_clean_rxcs(cp); +} + +/* allocated on open */ +static inline int cas_alloc_rx_desc(struct cas *cp, int ring) +{ + cas_page_t **page = cp->rx_pages[ring]; + int size, i = 0; + + size = RX_DESC_RINGN_SIZE(ring); + for (i = 0; i < size; i++) { + if ((page[i] = cas_page_alloc(cp, GFP_KERNEL)) == NULL) + return -1; + } + return 0; +} + +static int cas_alloc_rxds(struct cas *cp) +{ + int i; + + for (i = 0; i < N_RX_DESC_RINGS; i++) { + if (cas_alloc_rx_desc(cp, i) < 0) { + cas_free_rxds(cp); + return -1; + } + } + return 0; +} + +static void cas_reset_task(void *data) +{ + struct cas *cp = (struct cas *) data; +#if 0 + int pending = atomic_read(&cp->reset_task_pending); +#else + int pending_all = atomic_read(&cp->reset_task_pending_all); + int pending_spare = atomic_read(&cp->reset_task_pending_spare); + int pending_mtu = atomic_read(&cp->reset_task_pending_mtu); + + if (pending_all == 0 && pending_spare == 0 && pending_mtu == 0) { + /* We can have more tasks scheduled than actually + * needed. + */ + atomic_dec(&cp->reset_task_pending); + return; + } +#endif + /* The link went down, we reset the ring, but keep + * DMA stopped. Use this function for reset + * on error as well. + */ + if (cp->hw_running) { + unsigned long flags; + + /* Make sure we don't get interrupts or tx packets */ + netif_device_detach(cp->dev); + cas_lock_all_save(cp, flags); + + if (cp->opened) { + /* We call cas_spare_recover when we call cas_open. + * but we do not initialize the lists cas_spare_recover + * uses until cas_open is called. + */ + cas_spare_recover(cp, GFP_ATOMIC); + } +#if 1 + /* test => only pending_spare set */ + if (!pending_all && !pending_mtu) + goto done; +#else + if (pending == CAS_RESET_SPARE) + goto done; +#endif + /* when pending == CAS_RESET_ALL, the following + * call to cas_init_hw will restart auto negotiation. + * Setting the second argument of cas_reset to + * !(pending == CAS_RESET_ALL) will set this argument + * to 1 (avoiding reinitializing the PHY for the normal + * PCS case) when auto negotiation is not restarted. + */ +#if 1 + cas_reset(cp, !(pending_all > 0)); + if (cp->opened) + cas_clean_rings(cp); + cas_init_hw(cp, (pending_all > 0)); +#else + cas_reset(cp, !(pending == CAS_RESET_ALL)); + if (cp->opened) + cas_clean_rings(cp); + cas_init_hw(cp, pending == CAS_RESET_ALL); +#endif + +done: + cas_unlock_all_restore(cp, flags); + netif_device_attach(cp->dev); + } +#if 1 + atomic_sub(pending_all, &cp->reset_task_pending_all); + atomic_sub(pending_spare, &cp->reset_task_pending_spare); + atomic_sub(pending_mtu, &cp->reset_task_pending_mtu); + atomic_dec(&cp->reset_task_pending); +#else + atomic_set(&cp->reset_task_pending, 0); +#endif +} + +static void cas_link_timer(unsigned long data) +{ + struct cas *cp = (struct cas *) data; + int mask, pending = 0, reset = 0; + unsigned long flags; + + if (link_transition_timeout != 0 && + cp->link_transition_jiffies_valid && + ((jiffies - cp->link_transition_jiffies) > + (link_transition_timeout))) { + /* One-second counter so link-down workaround doesn't + * cause resets to occur so fast as to fool the switch + * into thinking the link is down. + */ + cp->link_transition_jiffies_valid = 0; + } + + if (!cp->hw_running) + return; + + spin_lock_irqsave(&cp->lock, flags); + cas_lock_tx(cp); + cas_entropy_gather(cp); + + /* If the link task is still pending, we just + * reschedule the link timer + */ +#if 1 + if (atomic_read(&cp->reset_task_pending_all) || + atomic_read(&cp->reset_task_pending_spare) || + atomic_read(&cp->reset_task_pending_mtu)) + goto done; +#else + if (atomic_read(&cp->reset_task_pending)) + goto done; +#endif + + /* check for rx cleaning */ + if ((mask = (cp->cas_flags & CAS_FLAG_RXD_POST_MASK))) { + int i, rmask; + + for (i = 0; i < MAX_RX_DESC_RINGS; i++) { + rmask = CAS_FLAG_RXD_POST(i); + if ((mask & rmask) == 0) + continue; + + /* post_rxds will do a mod_timer */ + if (cas_post_rxds_ringN(cp, i, cp->rx_last[i]) < 0) { + pending = 1; + continue; + } + cp->cas_flags &= ~rmask; + } + } + + if (CAS_PHY_MII(cp->phy_type)) { + u16 bmsr; + cas_mif_poll(cp, 0); + bmsr = cas_phy_read(cp, MII_BMSR); + /* WTZ: Solaris driver reads this twice, but that + * may be due to the PCS case and the use of a + * common implementation. Read it twice here to be + * safe. + */ + bmsr = cas_phy_read(cp, MII_BMSR); + cas_mif_poll(cp, 1); + readl(cp->regs + REG_MIF_STATUS); /* avoid dups */ + reset = cas_mii_link_check(cp, bmsr); + } else { + reset = cas_pcs_link_check(cp); + } + + if (reset) + goto done; + + /* check for tx state machine confusion */ + if ((readl(cp->regs + REG_MAC_TX_STATUS) & MAC_TX_FRAME_XMIT) == 0) { + u32 val = readl(cp->regs + REG_MAC_STATE_MACHINE); + u32 wptr, rptr; + int tlm = CAS_VAL(MAC_SM_TLM, val); + + if (((tlm == 0x5) || (tlm == 0x3)) && + (CAS_VAL(MAC_SM_ENCAP_SM, val) == 0)) { + if (netif_msg_tx_err(cp)) + printk(KERN_DEBUG "%s: tx err: " + "MAC_STATE[%08x]\n", + cp->dev->name, val); + reset = 1; + goto done; + } + + val = readl(cp->regs + REG_TX_FIFO_PKT_CNT); + wptr = readl(cp->regs + REG_TX_FIFO_WRITE_PTR); + rptr = readl(cp->regs + REG_TX_FIFO_READ_PTR); + if ((val == 0) && (wptr != rptr)) { + if (netif_msg_tx_err(cp)) + printk(KERN_DEBUG "%s: tx err: " + "TX_FIFO[%08x:%08x:%08x]\n", + cp->dev->name, val, wptr, rptr); + reset = 1; + } + + if (reset) + cas_hard_reset(cp); + } + +done: + if (reset) { +#if 1 + atomic_inc(&cp->reset_task_pending); + atomic_inc(&cp->reset_task_pending_all); + schedule_work(&cp->reset_task); +#else + atomic_set(&cp->reset_task_pending, CAS_RESET_ALL); + printk(KERN_ERR "reset called in cas_link_timer\n"); + schedule_work(&cp->reset_task); +#endif + } + + if (!pending) + mod_timer(&cp->link_timer, jiffies + CAS_LINK_TIMEOUT); + cas_unlock_tx(cp); + spin_unlock_irqrestore(&cp->lock, flags); +} + +/* tiny buffers are used to avoid target abort issues with + * older cassini's + */ +static void cas_tx_tiny_free(struct cas *cp) +{ + struct pci_dev *pdev = cp->pdev; + int i; + + for (i = 0; i < N_TX_RINGS; i++) { + if (!cp->tx_tiny_bufs[i]) + continue; + + pci_free_consistent(pdev, TX_TINY_BUF_BLOCK, + cp->tx_tiny_bufs[i], + cp->tx_tiny_dvma[i]); + cp->tx_tiny_bufs[i] = NULL; + } +} + +static int cas_tx_tiny_alloc(struct cas *cp) +{ + struct pci_dev *pdev = cp->pdev; + int i; + + for (i = 0; i < N_TX_RINGS; i++) { + cp->tx_tiny_bufs[i] = + pci_alloc_consistent(pdev, TX_TINY_BUF_BLOCK, + &cp->tx_tiny_dvma[i]); + if (!cp->tx_tiny_bufs[i]) { + cas_tx_tiny_free(cp); + return -1; + } + } + return 0; +} + + +static int cas_open(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + int hw_was_up, err; + unsigned long flags; + + down(&cp->pm_sem); + + hw_was_up = cp->hw_running; + + /* The power-management semaphore protects the hw_running + * etc. state so it is safe to do this bit without cp->lock + */ + if (!cp->hw_running) { + /* Reset the chip */ + cas_lock_all_save(cp, flags); + /* We set the second arg to cas_reset to zero + * because cas_init_hw below will have its second + * argument set to non-zero, which will force + * autonegotiation to start. + */ + cas_reset(cp, 0); + cp->hw_running = 1; + cas_unlock_all_restore(cp, flags); + } + + if (cas_tx_tiny_alloc(cp) < 0) + return -ENOMEM; + + /* alloc rx descriptors */ + err = -ENOMEM; + if (cas_alloc_rxds(cp) < 0) + goto err_tx_tiny; + + /* allocate spares */ + cas_spare_init(cp); + cas_spare_recover(cp, GFP_KERNEL); + + /* We can now request the interrupt as we know it's masked + * on the controller. cassini+ has up to 4 interrupts + * that can be used, but you need to do explicit pci interrupt + * mapping to expose them + */ + if (request_irq(cp->pdev->irq, cas_interrupt, + SA_SHIRQ, dev->name, (void *) dev)) { + printk(KERN_ERR "%s: failed to request irq !\n", + cp->dev->name); + err = -EAGAIN; + goto err_spare; + } + + /* init hw */ + cas_lock_all_save(cp, flags); + cas_clean_rings(cp); + cas_init_hw(cp, !hw_was_up); + cp->opened = 1; + cas_unlock_all_restore(cp, flags); + + netif_start_queue(dev); + up(&cp->pm_sem); + return 0; + +err_spare: + cas_spare_free(cp); + cas_free_rxds(cp); +err_tx_tiny: + cas_tx_tiny_free(cp); + up(&cp->pm_sem); + return err; +} + +static int cas_close(struct net_device *dev) +{ + unsigned long flags; + struct cas *cp = netdev_priv(dev); + + /* Make sure we don't get distracted by suspend/resume */ + down(&cp->pm_sem); + + netif_stop_queue(dev); + + /* Stop traffic, mark us closed */ + cas_lock_all_save(cp, flags); + cp->opened = 0; + cas_reset(cp, 0); + cas_phy_init(cp); + cas_begin_auto_negotiation(cp, NULL); + cas_clean_rings(cp); + cas_unlock_all_restore(cp, flags); + + free_irq(cp->pdev->irq, (void *) dev); + cas_spare_free(cp); + cas_free_rxds(cp); + cas_tx_tiny_free(cp); + up(&cp->pm_sem); + return 0; +} + +static struct { + const char name[ETH_GSTRING_LEN]; +} ethtool_cassini_statnames[] = { + {"collisions"}, + {"rx_bytes"}, + {"rx_crc_errors"}, + {"rx_dropped"}, + {"rx_errors"}, + {"rx_fifo_errors"}, + {"rx_frame_errors"}, + {"rx_length_errors"}, + {"rx_over_errors"}, + {"rx_packets"}, + {"tx_aborted_errors"}, + {"tx_bytes"}, + {"tx_dropped"}, + {"tx_errors"}, + {"tx_fifo_errors"}, + {"tx_packets"} +}; +#define CAS_NUM_STAT_KEYS (sizeof(ethtool_cassini_statnames)/ETH_GSTRING_LEN) + +static struct { + const int offsets; /* neg. values for 2nd arg to cas_read_phy */ +} ethtool_register_table[] = { + {-MII_BMSR}, + {-MII_BMCR}, + {REG_CAWR}, + {REG_INF_BURST}, + {REG_BIM_CFG}, + {REG_RX_CFG}, + {REG_HP_CFG}, + {REG_MAC_TX_CFG}, + {REG_MAC_RX_CFG}, + {REG_MAC_CTRL_CFG}, + {REG_MAC_XIF_CFG}, + {REG_MIF_CFG}, + {REG_PCS_CFG}, + {REG_SATURN_PCFG}, + {REG_PCS_MII_STATUS}, + {REG_PCS_STATE_MACHINE}, + {REG_MAC_COLL_EXCESS}, + {REG_MAC_COLL_LATE} +}; +#define CAS_REG_LEN (sizeof(ethtool_register_table)/sizeof(int)) +#define CAS_MAX_REGS (sizeof (u32)*CAS_REG_LEN) + +static void cas_read_regs(struct cas *cp, u8 *ptr, int len) +{ + u8 *p; + int i; + unsigned long flags; + + spin_lock_irqsave(&cp->lock, flags); + for (i = 0, p = ptr; i < len ; i ++, p += sizeof(u32)) { + u16 hval; + u32 val; + if (ethtool_register_table[i].offsets < 0) { + hval = cas_phy_read(cp, + -ethtool_register_table[i].offsets); + val = hval; + } else { + val= readl(cp->regs+ethtool_register_table[i].offsets); + } + memcpy(p, (u8 *)&val, sizeof(u32)); + } + spin_unlock_irqrestore(&cp->lock, flags); +} + +static struct net_device_stats *cas_get_stats(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + struct net_device_stats *stats = cp->net_stats; + unsigned long flags; + int i; + unsigned long tmp; + + /* we collate all of the stats into net_stats[N_TX_RING] */ + if (!cp->hw_running) + return stats + N_TX_RINGS; + + /* collect outstanding stats */ + /* WTZ: the Cassini spec gives these as 16 bit counters but + * stored in 32-bit words. Added a mask of 0xffff to be safe, + * in case the chip somehow puts any garbage in the other bits. + * Also, counter usage didn't seem to mach what Adrian did + * in the parts of the code that set these quantities. Made + * that consistent. + */ + spin_lock_irqsave(&cp->stat_lock[N_TX_RINGS], flags); + stats[N_TX_RINGS].rx_crc_errors += + readl(cp->regs + REG_MAC_FCS_ERR) & 0xffff; + stats[N_TX_RINGS].rx_frame_errors += + readl(cp->regs + REG_MAC_ALIGN_ERR) &0xffff; + stats[N_TX_RINGS].rx_length_errors += + readl(cp->regs + REG_MAC_LEN_ERR) & 0xffff; +#if 1 + tmp = (readl(cp->regs + REG_MAC_COLL_EXCESS) & 0xffff) + + (readl(cp->regs + REG_MAC_COLL_LATE) & 0xffff); + stats[N_TX_RINGS].tx_aborted_errors += tmp; + stats[N_TX_RINGS].collisions += + tmp + (readl(cp->regs + REG_MAC_COLL_NORMAL) & 0xffff); +#else + stats[N_TX_RINGS].tx_aborted_errors += + readl(cp->regs + REG_MAC_COLL_EXCESS); + stats[N_TX_RINGS].collisions += readl(cp->regs + REG_MAC_COLL_EXCESS) + + readl(cp->regs + REG_MAC_COLL_LATE); +#endif + cas_clear_mac_err(cp); + + /* saved bits that are unique to ring 0 */ + spin_lock(&cp->stat_lock[0]); + stats[N_TX_RINGS].collisions += stats[0].collisions; + stats[N_TX_RINGS].rx_over_errors += stats[0].rx_over_errors; + stats[N_TX_RINGS].rx_frame_errors += stats[0].rx_frame_errors; + stats[N_TX_RINGS].rx_fifo_errors += stats[0].rx_fifo_errors; + stats[N_TX_RINGS].tx_aborted_errors += stats[0].tx_aborted_errors; + stats[N_TX_RINGS].tx_fifo_errors += stats[0].tx_fifo_errors; + spin_unlock(&cp->stat_lock[0]); + + for (i = 0; i < N_TX_RINGS; i++) { + spin_lock(&cp->stat_lock[i]); + stats[N_TX_RINGS].rx_length_errors += + stats[i].rx_length_errors; + stats[N_TX_RINGS].rx_crc_errors += stats[i].rx_crc_errors; + stats[N_TX_RINGS].rx_packets += stats[i].rx_packets; + stats[N_TX_RINGS].tx_packets += stats[i].tx_packets; + stats[N_TX_RINGS].rx_bytes += stats[i].rx_bytes; + stats[N_TX_RINGS].tx_bytes += stats[i].tx_bytes; + stats[N_TX_RINGS].rx_errors += stats[i].rx_errors; + stats[N_TX_RINGS].tx_errors += stats[i].tx_errors; + stats[N_TX_RINGS].rx_dropped += stats[i].rx_dropped; + stats[N_TX_RINGS].tx_dropped += stats[i].tx_dropped; + memset(stats + i, 0, sizeof(struct net_device_stats)); + spin_unlock(&cp->stat_lock[i]); + } + spin_unlock_irqrestore(&cp->stat_lock[N_TX_RINGS], flags); + return stats + N_TX_RINGS; +} + + +static void cas_set_multicast(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + u32 rxcfg, rxcfg_new; + unsigned long flags; + int limit = STOP_TRIES; + + if (!cp->hw_running) + return; + + spin_lock_irqsave(&cp->lock, flags); + rxcfg = readl(cp->regs + REG_MAC_RX_CFG); + + /* disable RX MAC and wait for completion */ + writel(rxcfg & ~MAC_RX_CFG_EN, cp->regs + REG_MAC_RX_CFG); + while (readl(cp->regs + REG_MAC_RX_CFG) & MAC_RX_CFG_EN) { + if (!limit--) + break; + udelay(10); + } + + /* disable hash filter and wait for completion */ + limit = STOP_TRIES; + rxcfg &= ~(MAC_RX_CFG_PROMISC_EN | MAC_RX_CFG_HASH_FILTER_EN); + writel(rxcfg & ~MAC_RX_CFG_EN, cp->regs + REG_MAC_RX_CFG); + while (readl(cp->regs + REG_MAC_RX_CFG) & MAC_RX_CFG_HASH_FILTER_EN) { + if (!limit--) + break; + udelay(10); + } + + /* program hash filters */ + cp->mac_rx_cfg = rxcfg_new = cas_setup_multicast(cp); + rxcfg |= rxcfg_new; + writel(rxcfg, cp->regs + REG_MAC_RX_CFG); + spin_unlock_irqrestore(&cp->lock, flags); +} + +static void cas_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct cas *cp = netdev_priv(dev); + strncpy(info->driver, DRV_MODULE_NAME, ETHTOOL_BUSINFO_LEN); + strncpy(info->version, DRV_MODULE_VERSION, ETHTOOL_BUSINFO_LEN); + info->fw_version[0] = '\0'; + strncpy(info->bus_info, pci_name(cp->pdev), ETHTOOL_BUSINFO_LEN); + info->regdump_len = cp->casreg_len < CAS_MAX_REGS ? + cp->casreg_len : CAS_MAX_REGS; + info->n_stats = CAS_NUM_STAT_KEYS; +} + +static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct cas *cp = netdev_priv(dev); + u16 bmcr; + int full_duplex, speed, pause; + unsigned long flags; + enum link_state linkstate = link_up; + + cmd->advertising = 0; + cmd->supported = SUPPORTED_Autoneg; + if (cp->cas_flags & CAS_FLAG_1000MB_CAP) { + cmd->supported |= SUPPORTED_1000baseT_Full; + cmd->advertising |= ADVERTISED_1000baseT_Full; + } + + /* Record PHY settings if HW is on. */ + spin_lock_irqsave(&cp->lock, flags); + bmcr = 0; + linkstate = cp->lstate; + if (CAS_PHY_MII(cp->phy_type)) { + cmd->port = PORT_MII; + cmd->transceiver = (cp->cas_flags & CAS_FLAG_SATURN) ? + XCVR_INTERNAL : XCVR_EXTERNAL; + cmd->phy_address = cp->phy_addr; + cmd->advertising |= ADVERTISED_TP | ADVERTISED_MII | + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full; + + cmd->supported |= + (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_TP | SUPPORTED_MII); + + if (cp->hw_running) { + cas_mif_poll(cp, 0); + bmcr = cas_phy_read(cp, MII_BMCR); + cas_read_mii_link_mode(cp, &full_duplex, + &speed, &pause); + cas_mif_poll(cp, 1); + } + + } else { + cmd->port = PORT_FIBRE; + cmd->transceiver = XCVR_INTERNAL; + cmd->phy_address = 0; + cmd->supported |= SUPPORTED_FIBRE; + cmd->advertising |= ADVERTISED_FIBRE; + + if (cp->hw_running) { + /* pcs uses the same bits as mii */ + bmcr = readl(cp->regs + REG_PCS_MII_CTRL); + cas_read_pcs_link_mode(cp, &full_duplex, + &speed, &pause); + } + } + spin_unlock_irqrestore(&cp->lock, flags); + + if (bmcr & BMCR_ANENABLE) { + cmd->advertising |= ADVERTISED_Autoneg; + cmd->autoneg = AUTONEG_ENABLE; + cmd->speed = ((speed == 10) ? + SPEED_10 : + ((speed == 1000) ? + SPEED_1000 : SPEED_100)); + cmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF; + } else { + cmd->autoneg = AUTONEG_DISABLE; + cmd->speed = + (bmcr & CAS_BMCR_SPEED1000) ? + SPEED_1000 : + ((bmcr & BMCR_SPEED100) ? SPEED_100: + SPEED_10); + cmd->duplex = + (bmcr & BMCR_FULLDPLX) ? + DUPLEX_FULL : DUPLEX_HALF; + } + if (linkstate != link_up) { + /* Force these to "unknown" if the link is not up and + * autonogotiation in enabled. We can set the link + * speed to 0, but not cmd->duplex, + * because its legal values are 0 and 1. Ethtool will + * print the value reported in parentheses after the + * word "Unknown" for unrecognized values. + * + * If in forced mode, we report the speed and duplex + * settings that we configured. + */ + if (cp->link_cntl & BMCR_ANENABLE) { + cmd->speed = 0; + cmd->duplex = 0xff; + } else { + cmd->speed = SPEED_10; + if (cp->link_cntl & BMCR_SPEED100) { + cmd->speed = SPEED_100; + } else if (cp->link_cntl & CAS_BMCR_SPEED1000) { + cmd->speed = SPEED_1000; + } + cmd->duplex = (cp->link_cntl & BMCR_FULLDPLX)? + DUPLEX_FULL : DUPLEX_HALF; + } + } + return 0; +} + +static int cas_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct cas *cp = netdev_priv(dev); + unsigned long flags; + + /* Verify the settings we care about. */ + if (cmd->autoneg != AUTONEG_ENABLE && + cmd->autoneg != AUTONEG_DISABLE) + return -EINVAL; + + if (cmd->autoneg == AUTONEG_DISABLE && + ((cmd->speed != SPEED_1000 && + cmd->speed != SPEED_100 && + cmd->speed != SPEED_10) || + (cmd->duplex != DUPLEX_HALF && + cmd->duplex != DUPLEX_FULL))) + return -EINVAL; + + /* Apply settings and restart link process. */ + spin_lock_irqsave(&cp->lock, flags); + cas_begin_auto_negotiation(cp, cmd); + spin_unlock_irqrestore(&cp->lock, flags); + return 0; +} + +static int cas_nway_reset(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + unsigned long flags; + + if ((cp->link_cntl & BMCR_ANENABLE) == 0) + return -EINVAL; + + /* Restart link process. */ + spin_lock_irqsave(&cp->lock, flags); + cas_begin_auto_negotiation(cp, NULL); + spin_unlock_irqrestore(&cp->lock, flags); + + return 0; +} + +static u32 cas_get_link(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + return cp->lstate == link_up; +} + +static u32 cas_get_msglevel(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + return cp->msg_enable; +} + +static void cas_set_msglevel(struct net_device *dev, u32 value) +{ + struct cas *cp = netdev_priv(dev); + cp->msg_enable = value; +} + +static int cas_get_regs_len(struct net_device *dev) +{ + struct cas *cp = netdev_priv(dev); + return cp->casreg_len < CAS_MAX_REGS ? cp->casreg_len: CAS_MAX_REGS; +} + +static void cas_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct cas *cp = netdev_priv(dev); + regs->version = 0; + /* cas_read_regs handles locks (cp->lock). */ + cas_read_regs(cp, p, regs->len / sizeof(u32)); +} + +static int cas_get_stats_count(struct net_device *dev) +{ + return CAS_NUM_STAT_KEYS; +} + +static void cas_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + memcpy(data, ðtool_cassini_statnames, + CAS_NUM_STAT_KEYS * ETH_GSTRING_LEN); +} + +static void cas_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *estats, u64 *data) +{ + struct cas *cp = netdev_priv(dev); + struct net_device_stats *stats = cas_get_stats(cp->dev); + int i = 0; + data[i++] = stats->collisions; + data[i++] = stats->rx_bytes; + data[i++] = stats->rx_crc_errors; + data[i++] = stats->rx_dropped; + data[i++] = stats->rx_errors; + data[i++] = stats->rx_fifo_errors; + data[i++] = stats->rx_frame_errors; + data[i++] = stats->rx_length_errors; + data[i++] = stats->rx_over_errors; + data[i++] = stats->rx_packets; + data[i++] = stats->tx_aborted_errors; + data[i++] = stats->tx_bytes; + data[i++] = stats->tx_dropped; + data[i++] = stats->tx_errors; + data[i++] = stats->tx_fifo_errors; + data[i++] = stats->tx_packets; + BUG_ON(i != CAS_NUM_STAT_KEYS); +} + +static struct ethtool_ops cas_ethtool_ops = { + .get_drvinfo = cas_get_drvinfo, + .get_settings = cas_get_settings, + .set_settings = cas_set_settings, + .nway_reset = cas_nway_reset, + .get_link = cas_get_link, + .get_msglevel = cas_get_msglevel, + .set_msglevel = cas_set_msglevel, + .get_regs_len = cas_get_regs_len, + .get_regs = cas_get_regs, + .get_stats_count = cas_get_stats_count, + .get_strings = cas_get_strings, + .get_ethtool_stats = cas_get_ethtool_stats, +}; + +static int cas_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct cas *cp = netdev_priv(dev); + struct mii_ioctl_data *data = if_mii(ifr); + unsigned long flags; + int rc = -EOPNOTSUPP; + + /* Hold the PM semaphore while doing ioctl's or we may collide + * with open/close and power management and oops. + */ + down(&cp->pm_sem); + switch (cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = cp->phy_addr; + /* Fallthrough... */ + + case SIOCGMIIREG: /* Read MII PHY register. */ + spin_lock_irqsave(&cp->lock, flags); + cas_mif_poll(cp, 0); + data->val_out = cas_phy_read(cp, data->reg_num & 0x1f); + cas_mif_poll(cp, 1); + spin_unlock_irqrestore(&cp->lock, flags); + rc = 0; + break; + + case SIOCSMIIREG: /* Write MII PHY register. */ + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + spin_lock_irqsave(&cp->lock, flags); + cas_mif_poll(cp, 0); + rc = cas_phy_write(cp, data->reg_num & 0x1f, data->val_in); + cas_mif_poll(cp, 1); + spin_unlock_irqrestore(&cp->lock, flags); + break; + default: + break; + }; + + up(&cp->pm_sem); + return rc; +} + +static int __devinit cas_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int cas_version_printed = 0; + unsigned long casreg_base, casreg_len; + struct net_device *dev; + struct cas *cp; + int i, err, pci_using_dac; + u16 pci_cmd; + u8 orig_cacheline_size = 0, cas_cacheline_size = 0; + + if (cas_version_printed++ == 0) + printk(KERN_INFO "%s", version); + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device, " + "aborting.\n"); + return err; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + printk(KERN_ERR PFX "Cannot find proper PCI device " + "base address, aborting.\n"); + err = -ENODEV; + goto err_out_disable_pdev; + } + + dev = alloc_etherdev(sizeof(*cp)); + if (!dev) { + printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n"); + err = -ENOMEM; + goto err_out_disable_pdev; + } + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + err = pci_request_regions(pdev, dev->name); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources, " + "aborting.\n"); + goto err_out_free_netdev; + } + pci_set_master(pdev); + + /* we must always turn on parity response or else parity + * doesn't get generated properly. disable SERR/PERR as well. + * in addition, we want to turn MWI on. + */ + pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd); + pci_cmd &= ~PCI_COMMAND_SERR; + pci_cmd |= PCI_COMMAND_PARITY; + pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); + pci_set_mwi(pdev); + /* + * On some architectures, the default cache line size set + * by pci_set_mwi reduces perforamnce. We have to increase + * it for this case. To start, we'll print some configuration + * data. + */ +#if 1 + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, + &orig_cacheline_size); + if (orig_cacheline_size < CAS_PREF_CACHELINE_SIZE) { + cas_cacheline_size = + (CAS_PREF_CACHELINE_SIZE < SMP_CACHE_BYTES) ? + CAS_PREF_CACHELINE_SIZE : SMP_CACHE_BYTES; + if (pci_write_config_byte(pdev, + PCI_CACHE_LINE_SIZE, + cas_cacheline_size)) { + printk(KERN_ERR PFX "Could not set PCI cache " + "line size\n"); + goto err_write_cacheline; + } + } +#endif + + + /* Configure DMA attributes. */ + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + pci_using_dac = 1; + err = pci_set_consistent_dma_mask(pdev, + DMA_64BIT_MASK); + if (err < 0) { + printk(KERN_ERR PFX "Unable to obtain 64-bit DMA " + "for consistent allocations\n"); + goto err_out_free_res; + } + + } else { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + printk(KERN_ERR PFX "No usable DMA configuration, " + "aborting.\n"); + goto err_out_free_res; + } + pci_using_dac = 0; + } + + casreg_base = pci_resource_start(pdev, 0); + casreg_len = pci_resource_len(pdev, 0); + + cp = netdev_priv(dev); + cp->pdev = pdev; +#if 1 + /* A value of 0 indicates we never explicitly set it */ + cp->orig_cacheline_size = cas_cacheline_size ? orig_cacheline_size: 0; +#endif + cp->dev = dev; + cp->msg_enable = (cassini_debug < 0) ? CAS_DEF_MSG_ENABLE : + cassini_debug; + + cp->link_transition = LINK_TRANSITION_UNKNOWN; + cp->link_transition_jiffies_valid = 0; + + spin_lock_init(&cp->lock); + spin_lock_init(&cp->rx_inuse_lock); + spin_lock_init(&cp->rx_spare_lock); + for (i = 0; i < N_TX_RINGS; i++) { + spin_lock_init(&cp->stat_lock[i]); + spin_lock_init(&cp->tx_lock[i]); + } + spin_lock_init(&cp->stat_lock[N_TX_RINGS]); + init_MUTEX(&cp->pm_sem); + + init_timer(&cp->link_timer); + cp->link_timer.function = cas_link_timer; + cp->link_timer.data = (unsigned long) cp; + +#if 1 + /* Just in case the implementation of atomic operations + * change so that an explicit initialization is necessary. + */ + atomic_set(&cp->reset_task_pending, 0); + atomic_set(&cp->reset_task_pending_all, 0); + atomic_set(&cp->reset_task_pending_spare, 0); + atomic_set(&cp->reset_task_pending_mtu, 0); +#endif + INIT_WORK(&cp->reset_task, cas_reset_task, cp); + + /* Default link parameters */ + if (link_mode >= 0 && link_mode <= 6) + cp->link_cntl = link_modes[link_mode]; + else + cp->link_cntl = BMCR_ANENABLE; + cp->lstate = link_down; + cp->link_transition = LINK_TRANSITION_LINK_DOWN; + netif_carrier_off(cp->dev); + cp->timer_ticks = 0; + + /* give us access to cassini registers */ + cp->regs = ioremap(casreg_base, casreg_len); + if (cp->regs == 0UL) { + printk(KERN_ERR PFX "Cannot map device registers, " + "aborting.\n"); + goto err_out_free_res; + } + cp->casreg_len = casreg_len; + + pci_save_state(pdev); + cas_check_pci_invariants(cp); + cas_hard_reset(cp); + cas_reset(cp, 0); + if (cas_check_invariants(cp)) + goto err_out_iounmap; + + cp->init_block = (struct cas_init_block *) + pci_alloc_consistent(pdev, sizeof(struct cas_init_block), + &cp->block_dvma); + if (!cp->init_block) { + printk(KERN_ERR PFX "Cannot allocate init block, " + "aborting.\n"); + goto err_out_iounmap; + } + + for (i = 0; i < N_TX_RINGS; i++) + cp->init_txds[i] = cp->init_block->txds[i]; + + for (i = 0; i < N_RX_DESC_RINGS; i++) + cp->init_rxds[i] = cp->init_block->rxds[i]; + + for (i = 0; i < N_RX_COMP_RINGS; i++) + cp->init_rxcs[i] = cp->init_block->rxcs[i]; + + for (i = 0; i < N_RX_FLOWS; i++) + skb_queue_head_init(&cp->rx_flows[i]); + + dev->open = cas_open; + dev->stop = cas_close; + dev->hard_start_xmit = cas_start_xmit; + dev->get_stats = cas_get_stats; + dev->set_multicast_list = cas_set_multicast; + dev->do_ioctl = cas_ioctl; + dev->ethtool_ops = &cas_ethtool_ops; + dev->tx_timeout = cas_tx_timeout; + dev->watchdog_timeo = CAS_TX_TIMEOUT; + dev->change_mtu = cas_change_mtu; +#ifdef USE_NAPI + dev->poll = cas_poll; + dev->weight = 64; +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = cas_netpoll; +#endif + dev->irq = pdev->irq; + dev->dma = 0; + + /* Cassini features. */ + if ((cp->cas_flags & CAS_FLAG_NO_HW_CSUM) == 0) + dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG; + + if (pci_using_dac) + dev->features |= NETIF_F_HIGHDMA; + + if (register_netdev(dev)) { + printk(KERN_ERR PFX "Cannot register net device, " + "aborting.\n"); + goto err_out_free_consistent; + } + + i = readl(cp->regs + REG_BIM_CFG); + printk(KERN_INFO "%s: Sun Cassini%s (%sbit/%sMHz PCI/%s) " + "Ethernet[%d] ", dev->name, + (cp->cas_flags & CAS_FLAG_REG_PLUS) ? "+" : "", + (i & BIM_CFG_32BIT) ? "32" : "64", + (i & BIM_CFG_66MHZ) ? "66" : "33", + (cp->phy_type == CAS_PHY_SERDES) ? "Fi" : "Cu", pdev->irq); + + for (i = 0; i < 6; i++) + printk("%2.2x%c", dev->dev_addr[i], + i == 5 ? ' ' : ':'); + printk("\n"); + + pci_set_drvdata(pdev, dev); + cp->hw_running = 1; + cas_entropy_reset(cp); + cas_phy_init(cp); + cas_begin_auto_negotiation(cp, NULL); + return 0; + +err_out_free_consistent: + pci_free_consistent(pdev, sizeof(struct cas_init_block), + cp->init_block, cp->block_dvma); + +err_out_iounmap: + down(&cp->pm_sem); + if (cp->hw_running) + cas_shutdown(cp); + up(&cp->pm_sem); + + iounmap(cp->regs); + + +err_out_free_res: + pci_release_regions(pdev); + +err_write_cacheline: + /* Try to restore it in case the error occured after we + * set it. + */ + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, orig_cacheline_size); + +err_out_free_netdev: + free_netdev(dev); + +err_out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return -ENODEV; +} + +static void __devexit cas_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct cas *cp; + if (!dev) + return; + + cp = netdev_priv(dev); + unregister_netdev(dev); + + down(&cp->pm_sem); + flush_scheduled_work(); + if (cp->hw_running) + cas_shutdown(cp); + up(&cp->pm_sem); + +#if 1 + if (cp->orig_cacheline_size) { + /* Restore the cache line size if we had modified + * it. + */ + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, + cp->orig_cacheline_size); + } +#endif + pci_free_consistent(pdev, sizeof(struct cas_init_block), + cp->init_block, cp->block_dvma); + iounmap(cp->regs); + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int cas_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct cas *cp = netdev_priv(dev); + unsigned long flags; + + /* We hold the PM semaphore during entire driver + * sleep time + */ + down(&cp->pm_sem); + + /* If the driver is opened, we stop the DMA */ + if (cp->opened) { + netif_device_detach(dev); + + cas_lock_all_save(cp, flags); + + /* We can set the second arg of cas_reset to 0 + * because on resume, we'll call cas_init_hw with + * its second arg set so that autonegotiation is + * restarted. + */ + cas_reset(cp, 0); + cas_clean_rings(cp); + cas_unlock_all_restore(cp, flags); + } + + if (cp->hw_running) + cas_shutdown(cp); + + return 0; +} + +static int cas_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct cas *cp = netdev_priv(dev); + + printk(KERN_INFO "%s: resuming\n", dev->name); + + cas_hard_reset(cp); + if (cp->opened) { + unsigned long flags; + cas_lock_all_save(cp, flags); + cas_reset(cp, 0); + cp->hw_running = 1; + cas_clean_rings(cp); + cas_init_hw(cp, 1); + cas_unlock_all_restore(cp, flags); + + netif_device_attach(dev); + } + up(&cp->pm_sem); + return 0; +} +#endif /* CONFIG_PM */ + +static struct pci_driver cas_driver = { + .name = DRV_MODULE_NAME, + .id_table = cas_pci_tbl, + .probe = cas_init_one, + .remove = __devexit_p(cas_remove_one), +#ifdef CONFIG_PM + .suspend = cas_suspend, + .resume = cas_resume +#endif +}; + +static int __init cas_init(void) +{ + if (linkdown_timeout > 0) + link_transition_timeout = linkdown_timeout * HZ; + else + link_transition_timeout = 0; + + return pci_module_init(&cas_driver); +} + +static void __exit cas_cleanup(void) +{ + pci_unregister_driver(&cas_driver); +} + +module_init(cas_init); +module_exit(cas_cleanup); diff --git a/drivers/net/cassini.h b/drivers/net/cassini.h new file mode 100644 index 00000000000..88063ef16cf --- /dev/null +++ b/drivers/net/cassini.h @@ -0,0 +1,4425 @@ +/* $Id: cassini.h,v 1.16 2004/08/17 21:15:16 zaumen Exp $ + * cassini.h: Definitions for Sun Microsystems Cassini(+) ethernet driver. + * + * Copyright (C) 2004 Sun Microsystems Inc. + * Copyright (c) 2003 Adrian Sun (asun@darksunrising.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + * vendor id: 0x108E (Sun Microsystems, Inc.) + * device id: 0xabba (Cassini) + * revision ids: 0x01 = Cassini + * 0x02 = Cassini rev 2 + * 0x10 = Cassini+ + * 0x11 = Cassini+ 0.2u + * + * vendor id: 0x100b (National Semiconductor) + * device id: 0x0035 (DP83065/Saturn) + * revision ids: 0x30 = Saturn B2 + * + * rings are all offset from 0. + * + * there are two clock domains: + * PCI: 33/66MHz clock + * chip: 125MHz clock + */ + +#ifndef _CASSINI_H +#define _CASSINI_H + +/* cassini register map: 2M memory mapped in 32-bit memory space accessible as + * 32-bit words. there is no i/o port access. REG_ addresses are + * shared between cassini and cassini+. REG_PLUS_ addresses only + * appear in cassini+. REG_MINUS_ addresses only appear in cassini. + */ +#define CAS_ID_REV2 0x02 +#define CAS_ID_REVPLUS 0x10 +#define CAS_ID_REVPLUS02u 0x11 +#define CAS_ID_REVSATURNB2 0x30 + +/** global resources **/ + +/* this register sets the weights for the weighted round robin arbiter. e.g., + * if rx weight == 1 and tx weight == 0, rx == 2x tx transfer credit + * for its next turn to access the pci bus. + * map: 0x0 = x1, 0x1 = x2, 0x2 = x4, 0x3 = x8 + * DEFAULT: 0x0, SIZE: 5 bits + */ +#define REG_CAWR 0x0004 /* core arbitration weight */ +#define CAWR_RX_DMA_WEIGHT_SHIFT 0 +#define CAWR_RX_DMA_WEIGHT_MASK 0x03 /* [0:1] */ +#define CAWR_TX_DMA_WEIGHT_SHIFT 2 +#define CAWR_TX_DMA_WEIGHT_MASK 0x0C /* [3:2] */ +#define CAWR_RR_DIS 0x10 /* [4] */ + +/* if enabled, BIM can send bursts across PCI bus > cacheline size. burst + * sizes determined by length of packet or descriptor transfer and the + * max length allowed by the target. + * DEFAULT: 0x0, SIZE: 1 bit + */ +#define REG_INF_BURST 0x0008 /* infinite burst enable reg */ +#define INF_BURST_EN 0x1 /* enable */ + +/* top level interrupts [0-9] are auto-cleared to 0 when the status + * register is read. second level interrupts [13 - 18] are cleared at + * the source. tx completion register 3 is replicated in [19 - 31] + * DEFAULT: 0x00000000, SIZE: 29 bits + */ +#define REG_INTR_STATUS 0x000C /* interrupt status register */ +#define INTR_TX_INTME 0x00000001 /* frame w/ INT ME desc bit set + xferred from host queue to + TX FIFO */ +#define INTR_TX_ALL 0x00000002 /* all xmit frames xferred into + TX FIFO. i.e., + TX Kick == TX complete. if + PACED_MODE set, then TX FIFO + also empty */ +#define INTR_TX_DONE 0x00000004 /* any frame xferred into tx + FIFO */ +#define INTR_TX_TAG_ERROR 0x00000008 /* TX FIFO tag framing + corrupted. FATAL ERROR */ +#define INTR_RX_DONE 0x00000010 /* at least 1 frame xferred + from RX FIFO to host mem. + RX completion reg updated. + may be delayed by recv + intr blanking. */ +#define INTR_RX_BUF_UNAVAIL 0x00000020 /* no more receive buffers. + RX Kick == RX complete */ +#define INTR_RX_TAG_ERROR 0x00000040 /* RX FIFO tag framing + corrupted. FATAL ERROR */ +#define INTR_RX_COMP_FULL 0x00000080 /* no more room in completion + ring to post descriptors. + RX complete head incr to + almost reach RX complete + tail */ +#define INTR_RX_BUF_AE 0x00000100 /* less than the + programmable threshold # + of free descr avail for + hw use */ +#define INTR_RX_COMP_AF 0x00000200 /* less than the + programmable threshold # + of descr spaces for hw + use in completion descr + ring */ +#define INTR_RX_LEN_MISMATCH 0x00000400 /* len field from MAC != + len of non-reassembly pkt + from fifo during DMA or + header parser provides TCP + header and payload size > + MAC packet size. + FATAL ERROR */ +#define INTR_SUMMARY 0x00001000 /* summary interrupt bit. this + bit will be set if an interrupt + generated on the pci bus. useful + when driver is polling for + interrupts */ +#define INTR_PCS_STATUS 0x00002000 /* PCS interrupt status register */ +#define INTR_TX_MAC_STATUS 0x00004000 /* TX MAC status register has at + least 1 unmasked interrupt set */ +#define INTR_RX_MAC_STATUS 0x00008000 /* RX MAC status register has at + least 1 unmasked interrupt set */ +#define INTR_MAC_CTRL_STATUS 0x00010000 /* MAC control status register has + at least 1 unmasked interrupt + set */ +#define INTR_MIF_STATUS 0x00020000 /* MIF status register has at least + 1 unmasked interrupt set */ +#define INTR_PCI_ERROR_STATUS 0x00040000 /* PCI error status register in the + BIF has at least 1 unmasked + interrupt set */ +#define INTR_TX_COMP_3_MASK 0xFFF80000 /* mask for TX completion + 3 reg data */ +#define INTR_TX_COMP_3_SHIFT 19 +#define INTR_ERROR_MASK (INTR_MIF_STATUS | INTR_PCI_ERROR_STATUS | \ + INTR_PCS_STATUS | INTR_RX_LEN_MISMATCH | \ + INTR_TX_MAC_STATUS | INTR_RX_MAC_STATUS | \ + INTR_TX_TAG_ERROR | INTR_RX_TAG_ERROR | \ + INTR_MAC_CTRL_STATUS) + +/* determines which status events will cause an interrupt. layout same + * as REG_INTR_STATUS. + * DEFAULT: 0xFFFFFFFF, SIZE: 16 bits + */ +#define REG_INTR_MASK 0x0010 /* Interrupt mask */ + +/* top level interrupt bits that are cleared during read of REG_INTR_STATUS_ALIAS. + * useful when driver is polling for interrupts. layout same as REG_INTR_MASK. + * DEFAULT: 0x00000000, SIZE: 12 bits + */ +#define REG_ALIAS_CLEAR 0x0014 /* alias clear mask + (used w/ status alias) */ +/* same as REG_INTR_STATUS except that only bits cleared are those selected by + * REG_ALIAS_CLEAR + * DEFAULT: 0x00000000, SIZE: 29 bits + */ +#define REG_INTR_STATUS_ALIAS 0x001C /* interrupt status alias + (selective clear) */ + +/* DEFAULT: 0x0, SIZE: 3 bits */ +#define REG_PCI_ERR_STATUS 0x1000 /* PCI error status */ +#define PCI_ERR_BADACK 0x01 /* reserved in Cassini+. + set if no ACK64# during ABS64 cycle + in Cassini. */ +#define PCI_ERR_DTRTO 0x02 /* delayed xaction timeout. set if + no read retry after 2^15 clocks */ +#define PCI_ERR_OTHER 0x04 /* other PCI errors */ +#define PCI_ERR_BIM_DMA_WRITE 0x08 /* BIM received 0 count DMA write req. + unused in Cassini. */ +#define PCI_ERR_BIM_DMA_READ 0x10 /* BIM received 0 count DMA read req. + unused in Cassini. */ +#define PCI_ERR_BIM_DMA_TIMEOUT 0x20 /* BIM received 255 retries during + DMA. unused in cassini. */ + +/* mask for PCI status events that will set PCI_ERR_STATUS. if cleared, event + * causes an interrupt to be generated. + * DEFAULT: 0x7, SIZE: 3 bits + */ +#define REG_PCI_ERR_STATUS_MASK 0x1004 /* PCI Error status mask */ + +/* used to configure PCI related parameters that are not in PCI config space. + * DEFAULT: 0bxx000, SIZE: 5 bits + */ +#define REG_BIM_CFG 0x1008 /* BIM Configuration */ +#define BIM_CFG_RESERVED0 0x001 /* reserved */ +#define BIM_CFG_RESERVED1 0x002 /* reserved */ +#define BIM_CFG_64BIT_DISABLE 0x004 /* disable 64-bit mode */ +#define BIM_CFG_66MHZ 0x008 /* (ro) 1 = 66MHz, 0 = < 66MHz */ +#define BIM_CFG_32BIT 0x010 /* (ro) 1 = 32-bit slot, 0 = 64-bit */ +#define BIM_CFG_DPAR_INTR_ENABLE 0x020 /* detected parity err enable */ +#define BIM_CFG_RMA_INTR_ENABLE 0x040 /* master abort intr enable */ +#define BIM_CFG_RTA_INTR_ENABLE 0x080 /* target abort intr enable */ +#define BIM_CFG_RESERVED2 0x100 /* reserved */ +#define BIM_CFG_BIM_DISABLE 0x200 /* stop BIM DMA. use before global + reset. reserved in Cassini. */ +#define BIM_CFG_BIM_STATUS 0x400 /* (ro) 1 = BIM DMA suspended. + reserved in Cassini. */ +#define BIM_CFG_PERROR_BLOCK 0x800 /* block PERR# to pci bus. def: 0. + reserved in Cassini. */ + +/* DEFAULT: 0x00000000, SIZE: 32 bits */ +#define REG_BIM_DIAG 0x100C /* BIM Diagnostic */ +#define BIM_DIAG_MSTR_SM_MASK 0x3FFFFF00 /* PCI master controller state + machine bits [21:0] */ +#define BIM_DIAG_BRST_SM_MASK 0x7F /* PCI burst controller state + machine bits [6:0] */ + +/* writing to SW_RESET_TX and SW_RESET_RX will issue a global + * reset. poll until TX and RX read back as 0's for completion. + */ +#define REG_SW_RESET 0x1010 /* Software reset */ +#define SW_RESET_TX 0x00000001 /* reset TX DMA engine. poll until + cleared to 0. */ +#define SW_RESET_RX 0x00000002 /* reset RX DMA engine. poll until + cleared to 0. */ +#define SW_RESET_RSTOUT 0x00000004 /* force RSTOUT# pin active (low). + resets PHY and anything else + connected to RSTOUT#. RSTOUT# + is also activated by local PCI + reset when hot-swap is being + done. */ +#define SW_RESET_BLOCK_PCS_SLINK 0x00000008 /* if a global reset is done with + this bit set, PCS and SLINK + modules won't be reset. + i.e., link won't drop. */ +#define SW_RESET_BREQ_SM_MASK 0x00007F00 /* breq state machine [6:0] */ +#define SW_RESET_PCIARB_SM_MASK 0x00070000 /* pci arbitration state bits: + 0b000: ARB_IDLE1 + 0b001: ARB_IDLE2 + 0b010: ARB_WB_ACK + 0b011: ARB_WB_WAT + 0b100: ARB_RB_ACK + 0b101: ARB_RB_WAT + 0b110: ARB_RB_END + 0b111: ARB_WB_END */ +#define SW_RESET_RDPCI_SM_MASK 0x00300000 /* read pci state bits: + 0b00: RD_PCI_WAT + 0b01: RD_PCI_RDY + 0b11: RD_PCI_ACK */ +#define SW_RESET_RDARB_SM_MASK 0x00C00000 /* read arbitration state bits: + 0b00: AD_IDL_RX + 0b01: AD_ACK_RX + 0b10: AD_ACK_TX + 0b11: AD_IDL_TX */ +#define SW_RESET_WRPCI_SM_MASK 0x06000000 /* write pci state bits + 0b00: WR_PCI_WAT + 0b01: WR_PCI_RDY + 0b11: WR_PCI_ACK */ +#define SW_RESET_WRARB_SM_MASK 0x38000000 /* write arbitration state bits: + 0b000: ARB_IDLE1 + 0b001: ARB_IDLE2 + 0b010: ARB_TX_ACK + 0b011: ARB_TX_WAT + 0b100: ARB_RX_ACK + 0b110: ARB_RX_WAT */ + +/* Cassini only. 64-bit register used to check PCI datapath. when read, + * value written has both lower and upper 32-bit halves rotated to the right + * one bit position. e.g., FFFFFFFF FFFFFFFF -> 7FFFFFFF 7FFFFFFF + */ +#define REG_MINUS_BIM_DATAPATH_TEST 0x1018 /* Cassini: BIM datapath test + Cassini+: reserved */ + +/* output enables are provided for each device's chip select and for the rest + * of the outputs from cassini to its local bus devices. two sw programmable + * bits are connected to general purpus control/status bits. + * DEFAULT: 0x7 + */ +#define REG_BIM_LOCAL_DEV_EN 0x1020 /* BIM local device + output EN. default: 0x7 */ +#define BIM_LOCAL_DEV_PAD 0x01 /* address bus, RW signal, and + OE signal output enable on the + local bus interface. these + are shared between both local + bus devices. tristate when 0. */ +#define BIM_LOCAL_DEV_PROM 0x02 /* PROM chip select */ +#define BIM_LOCAL_DEV_EXT 0x04 /* secondary local bus device chip + select output enable */ +#define BIM_LOCAL_DEV_SOFT_0 0x08 /* sw programmable ctrl bit 0 */ +#define BIM_LOCAL_DEV_SOFT_1 0x10 /* sw programmable ctrl bit 1 */ +#define BIM_LOCAL_DEV_HW_RESET 0x20 /* internal hw reset. Cassini+ only. */ + +/* access 24 entry BIM read and write buffers. put address in REG_BIM_BUFFER_ADDR + * and read/write from/to it REG_BIM_BUFFER_DATA_LOW and _DATA_HI. + * _DATA_HI should be the last access of the sequence. + * DEFAULT: undefined + */ +#define REG_BIM_BUFFER_ADDR 0x1024 /* BIM buffer address. for + purposes. */ +#define BIM_BUFFER_ADDR_MASK 0x3F /* index (0 - 23) of buffer */ +#define BIM_BUFFER_WR_SELECT 0x40 /* write buffer access = 1 + read buffer access = 0 */ +/* DEFAULT: undefined */ +#define REG_BIM_BUFFER_DATA_LOW 0x1028 /* BIM buffer data low */ +#define REG_BIM_BUFFER_DATA_HI 0x102C /* BIM buffer data high */ + +/* set BIM_RAM_BIST_START to start built-in self test for BIM read buffer. + * bit auto-clears when done with status read from _SUMMARY and _PASS bits. + */ +#define REG_BIM_RAM_BIST 0x102C /* BIM RAM (read buffer) BIST + control/status */ +#define BIM_RAM_BIST_RD_START 0x01 /* start BIST for BIM read buffer */ +#define BIM_RAM_BIST_WR_START 0x02 /* start BIST for BIM write buffer. + Cassini only. reserved in + Cassini+. */ +#define BIM_RAM_BIST_RD_PASS 0x04 /* summary BIST pass status for read + buffer. */ +#define BIM_RAM_BIST_WR_PASS 0x08 /* summary BIST pass status for write + buffer. Cassini only. reserved + in Cassini+. */ +#define BIM_RAM_BIST_RD_LOW_PASS 0x10 /* read low bank passes BIST */ +#define BIM_RAM_BIST_RD_HI_PASS 0x20 /* read high bank passes BIST */ +#define BIM_RAM_BIST_WR_LOW_PASS 0x40 /* write low bank passes BIST. + Cassini only. reserved in + Cassini+. */ +#define BIM_RAM_BIST_WR_HI_PASS 0x80 /* write high bank passes BIST. + Cassini only. reserved in + Cassini+. */ + +/* ASUN: i'm not sure what this does as it's not in the spec. + * DEFAULT: 0xFC + */ +#define REG_BIM_DIAG_MUX 0x1030 /* BIM diagnostic probe mux + select register */ + +/* enable probe monitoring mode and select data appearing on the P_A* bus. bit + * values for _SEL_HI_MASK and _SEL_LOW_MASK: + * 0x0: internal probe[7:0] (pci arb state, wtc empty w, wtc full w, wtc empty w, + * wtc empty r, post pci) + * 0x1: internal probe[15:8] (pci wbuf comp, pci wpkt comp, pci rbuf comp, + * pci rpkt comp, txdma wr req, txdma wr ack, + * txdma wr rdy, txdma wr xfr done) + * 0x2: internal probe[23:16] (txdma rd req, txdma rd ack, txdma rd rdy, rxdma rd, + * rd arb state, rd pci state) + * 0x3: internal probe[31:24] (rxdma req, rxdma ack, rxdma rdy, wrarb state, + * wrpci state) + * 0x4: pci io probe[7:0] 0x5: pci io probe[15:8] + * 0x6: pci io probe[23:16] 0x7: pci io probe[31:24] + * 0x8: pci io probe[39:32] 0x9: pci io probe[47:40] + * 0xa: pci io probe[55:48] 0xb: pci io probe[63:56] + * the following are not available in Cassini: + * 0xc: rx probe[7:0] 0xd: tx probe[7:0] + * 0xe: hp probe[7:0] 0xf: mac probe[7:0] + */ +#define REG_PLUS_PROBE_MUX_SELECT 0x1034 /* Cassini+: PROBE MUX SELECT */ +#define PROBE_MUX_EN 0x80000000 /* allow probe signals to be + driven on local bus P_A[15:0] + for debugging */ +#define PROBE_MUX_SUB_MUX_MASK 0x0000FF00 /* select sub module probe signals: + 0x03 = mac[1:0] + 0x0C = rx[1:0] + 0x30 = tx[1:0] + 0xC0 = hp[1:0] */ +#define PROBE_MUX_SEL_HI_MASK 0x000000F0 /* select which module to appear + on P_A[15:8]. see above for + values. */ +#define PROBE_MUX_SEL_LOW_MASK 0x0000000F /* select which module to appear + on P_A[7:0]. see above for + values. */ + +/* values mean the same thing as REG_INTR_MASK excep that it's for INTB. + DEFAULT: 0x1F */ +#define REG_PLUS_INTR_MASK_1 0x1038 /* Cassini+: interrupt mask + register 2 for INTB */ +#define REG_PLUS_INTRN_MASK(x) (REG_PLUS_INTR_MASK_1 + ((x) - 1)*16) +/* bits correspond to both _MASK and _STATUS registers. _ALT corresponds to + * all of the alternate (2-4) INTR registers while _1 corresponds to only + * _MASK_1 and _STATUS_1 registers. + * DEFAULT: 0x7 for MASK registers, 0x0 for ALIAS_CLEAR registers + */ +#define INTR_RX_DONE_ALT 0x01 +#define INTR_RX_COMP_FULL_ALT 0x02 +#define INTR_RX_COMP_AF_ALT 0x04 +#define INTR_RX_BUF_UNAVAIL_1 0x08 +#define INTR_RX_BUF_AE_1 0x10 /* almost empty */ +#define INTRN_MASK_RX_EN 0x80 +#define INTRN_MASK_CLEAR_ALL (INTR_RX_DONE_ALT | \ + INTR_RX_COMP_FULL_ALT | \ + INTR_RX_COMP_AF_ALT | \ + INTR_RX_BUF_UNAVAIL_1 | \ + INTR_RX_BUF_AE_1) +#define REG_PLUS_INTR_STATUS_1 0x103C /* Cassini+: interrupt status + register 2 for INTB. default: 0x1F */ +#define REG_PLUS_INTRN_STATUS(x) (REG_PLUS_INTR_STATUS_1 + ((x) - 1)*16) +#define INTR_STATUS_ALT_INTX_EN 0x80 /* generate INTX when one of the + flags are set. enables desc ring. */ + +#define REG_PLUS_ALIAS_CLEAR_1 0x1040 /* Cassini+: alias clear mask + register 2 for INTB */ +#define REG_PLUS_ALIASN_CLEAR(x) (REG_PLUS_ALIAS_CLEAR_1 + ((x) - 1)*16) + +#define REG_PLUS_INTR_STATUS_ALIAS_1 0x1044 /* Cassini+: interrupt status + register alias 2 for INTB */ +#define REG_PLUS_INTRN_STATUS_ALIAS(x) (REG_PLUS_INTR_STATUS_ALIAS_1 + ((x) - 1)*16) + +#define REG_SATURN_PCFG 0x106c /* pin configuration register for + integrated macphy */ + +#define SATURN_PCFG_TLA 0x00000001 /* 1 = phy actled */ +#define SATURN_PCFG_FLA 0x00000002 /* 1 = phy link10led */ +#define SATURN_PCFG_CLA 0x00000004 /* 1 = phy link100led */ +#define SATURN_PCFG_LLA 0x00000008 /* 1 = phy link1000led */ +#define SATURN_PCFG_RLA 0x00000010 /* 1 = phy duplexled */ +#define SATURN_PCFG_PDS 0x00000020 /* phy debug mode. + 0 = normal */ +#define SATURN_PCFG_MTP 0x00000080 /* test point select */ +#define SATURN_PCFG_GMO 0x00000100 /* GMII observe. 1 = + GMII on SERDES pins for + monitoring. */ +#define SATURN_PCFG_FSI 0x00000200 /* 1 = freeze serdes/gmii. all + pins configed as outputs. + for power saving when using + internal phy. */ +#define SATURN_PCFG_LAD 0x00000800 /* 0 = mac core led ctrl + polarity from strapping + value. + 1 = mac core led ctrl + polarity active low. */ + + +/** transmit dma registers **/ +#define MAX_TX_RINGS_SHIFT 2 +#define MAX_TX_RINGS (1 << MAX_TX_RINGS_SHIFT) +#define MAX_TX_RINGS_MASK (MAX_TX_RINGS - 1) + +/* TX configuration. + * descr ring sizes size = 32 * (1 << n), n < 9. e.g., 0x8 = 8k. default: 0x8 + * DEFAULT: 0x3F000001 + */ +#define REG_TX_CFG 0x2004 /* TX config */ +#define TX_CFG_DMA_EN 0x00000001 /* enable TX DMA. if cleared, DMA + will stop after xfer of current + buffer has been completed. */ +#define TX_CFG_FIFO_PIO_SEL 0x00000002 /* TX DMA FIFO can be + accessed w/ FIFO addr + and data registers. + TX DMA should be + disabled. */ +#define TX_CFG_DESC_RING0_MASK 0x0000003C /* # desc entries in + ring 1. */ +#define TX_CFG_DESC_RING0_SHIFT 2 +#define TX_CFG_DESC_RINGN_MASK(a) (TX_CFG_DESC_RING0_MASK << (a)*4) +#define TX_CFG_DESC_RINGN_SHIFT(a) (TX_CFG_DESC_RING0_SHIFT + (a)*4) +#define TX_CFG_PACED_MODE 0x00100000 /* TX_ALL only set after + TX FIFO becomes empty. + if 0, TX_ALL set + if descr queue empty. */ +#define TX_CFG_DMA_RDPIPE_DIS 0x01000000 /* always set to 1 */ +#define TX_CFG_COMPWB_Q1 0x02000000 /* completion writeback happens at + the end of every packet kicked + through Q1. */ +#define TX_CFG_COMPWB_Q2 0x04000000 /* completion writeback happens at + the end of every packet kicked + through Q2. */ +#define TX_CFG_COMPWB_Q3 0x08000000 /* completion writeback happens at + the end of every packet kicked + through Q3 */ +#define TX_CFG_COMPWB_Q4 0x10000000 /* completion writeback happens at + the end of every packet kicked + through Q4 */ +#define TX_CFG_INTR_COMPWB_DIS 0x20000000 /* disable pre-interrupt completion + writeback */ +#define TX_CFG_CTX_SEL_MASK 0xC0000000 /* selects tx test port + connection + 0b00: tx mac req, + tx mac retry req, + tx ack and tx tag. + 0b01: txdma rd req, + txdma rd ack, + txdma rd rdy, + txdma rd type0 + 0b11: txdma wr req, + txdma wr ack, + txdma wr rdy, + txdma wr xfr done. */ +#define TX_CFG_CTX_SEL_SHIFT 30 + +/* 11-bit counters that point to next location in FIFO to be loaded/retrieved. + * used for diagnostics only. + */ +#define REG_TX_FIFO_WRITE_PTR 0x2014 /* TX FIFO write pointer */ +#define REG_TX_FIFO_SHADOW_WRITE_PTR 0x2018 /* TX FIFO shadow write + pointer. temp hold reg. + diagnostics only. */ +#define REG_TX_FIFO_READ_PTR 0x201C /* TX FIFO read pointer */ +#define REG_TX_FIFO_SHADOW_READ_PTR 0x2020 /* TX FIFO shadow read + pointer */ + +/* (ro) 11-bit up/down counter w/ # of frames currently in TX FIFO */ +#define REG_TX_FIFO_PKT_CNT 0x2024 /* TX FIFO packet counter */ + +/* current state of all state machines in TX */ +#define REG_TX_SM_1 0x2028 /* TX state machine reg #1 */ +#define TX_SM_1_CHAIN_MASK 0x000003FF /* chaining state machine */ +#define TX_SM_1_CSUM_MASK 0x00000C00 /* checksum state machine */ +#define TX_SM_1_FIFO_LOAD_MASK 0x0003F000 /* FIFO load state machine. + = 0x01 when TX disabled. */ +#define TX_SM_1_FIFO_UNLOAD_MASK 0x003C0000 /* FIFO unload state machine */ +#define TX_SM_1_CACHE_MASK 0x03C00000 /* desc. prefetch cache controller + state machine */ +#define TX_SM_1_CBQ_ARB_MASK 0xF8000000 /* CBQ arbiter state machine */ + +#define REG_TX_SM_2 0x202C /* TX state machine reg #2 */ +#define TX_SM_2_COMP_WB_MASK 0x07 /* completion writeback sm */ +#define TX_SM_2_SUB_LOAD_MASK 0x38 /* sub load state machine */ +#define TX_SM_2_KICK_MASK 0xC0 /* kick state machine */ + +/* 64-bit pointer to the transmit data buffer. only the 50 LSB are incremented + * while the upper 23 bits are taken from the TX descriptor + */ +#define REG_TX_DATA_PTR_LOW 0x2030 /* TX data pointer low */ +#define REG_TX_DATA_PTR_HI 0x2034 /* TX data pointer high */ + +/* 13 bit registers written by driver w/ descriptor value that follows + * last valid xmit descriptor. kick # and complete # values are used by + * the xmit dma engine to control tx descr fetching. if > 1 valid + * tx descr is available within the cache line being read, cassini will + * internally cache up to 4 of them. 0 on reset. _KICK = rw, _COMP = ro. + */ +#define REG_TX_KICK0 0x2038 /* TX kick reg #1 */ +#define REG_TX_KICKN(x) (REG_TX_KICK0 + (x)*4) +#define REG_TX_COMP0 0x2048 /* TX completion reg #1 */ +#define REG_TX_COMPN(x) (REG_TX_COMP0 + (x)*4) + +/* values of TX_COMPLETE_1-4 are written. each completion register + * is 2bytes in size and contiguous. 8B allocation w/ 8B alignment. + * NOTE: completion reg values are only written back prior to TX_INTME and + * TX_ALL interrupts. at all other times, the most up-to-date index values + * should be obtained from the REG_TX_COMPLETE_# registers. + * here's the layout: + * offset from base addr completion # byte + * 0 TX_COMPLETE_1_MSB + * 1 TX_COMPLETE_1_LSB + * 2 TX_COMPLETE_2_MSB + * 3 TX_COMPLETE_2_LSB + * 4 TX_COMPLETE_3_MSB + * 5 TX_COMPLETE_3_LSB + * 6 TX_COMPLETE_4_MSB + * 7 TX_COMPLETE_4_LSB + */ +#define TX_COMPWB_SIZE 8 +#define REG_TX_COMPWB_DB_LOW 0x2058 /* TX completion write back + base low */ +#define REG_TX_COMPWB_DB_HI 0x205C /* TX completion write back + base high */ +#define TX_COMPWB_MSB_MASK 0x00000000000000FFULL +#define TX_COMPWB_MSB_SHIFT 0 +#define TX_COMPWB_LSB_MASK 0x000000000000FF00ULL +#define TX_COMPWB_LSB_SHIFT 8 +#define TX_COMPWB_NEXT(x) ((x) >> 16) + +/* 53 MSB used as base address. 11 LSB assumed to be 0. TX desc pointer must + * be 2KB-aligned. */ +#define REG_TX_DB0_LOW 0x2060 /* TX descriptor base low #1 */ +#define REG_TX_DB0_HI 0x2064 /* TX descriptor base hi #1 */ +#define REG_TX_DBN_LOW(x) (REG_TX_DB0_LOW + (x)*8) +#define REG_TX_DBN_HI(x) (REG_TX_DB0_HI + (x)*8) + +/* 16-bit registers hold weights for the weighted round-robin of the + * four CBQ TX descr rings. weights correspond to # bytes xferred from + * host to TXFIFO in a round of WRR arbitration. can be set + * dynamically with new weights set upon completion of the current + * packet transfer from host memory to TXFIFO. a dummy write to any of + * these registers causes a queue1 pre-emption with all historical bw + * deficit data reset to 0 (useful when congestion requires a + * pre-emption/re-allocation of network bandwidth + */ +#define REG_TX_MAXBURST_0 0x2080 /* TX MaxBurst #1 */ +#define REG_TX_MAXBURST_1 0x2084 /* TX MaxBurst #2 */ +#define REG_TX_MAXBURST_2 0x2088 /* TX MaxBurst #3 */ +#define REG_TX_MAXBURST_3 0x208C /* TX MaxBurst #4 */ + +/* diagnostics access to any TX FIFO location. every access is 65 + * bits. _DATA_LOW = 32 LSB, _DATA_HI_T1/T0 = 32 MSB. _TAG = tag bit. + * writing _DATA_HI_T0 sets tag bit low, writing _DATA_HI_T1 sets tag + * bit high. TX_FIFO_PIO_SEL must be set for TX FIFO PIO access. if + * TX FIFO data integrity is desired, TX DMA should be + * disabled. _DATA_HI_Tx should be the last access of the sequence. + */ +#define REG_TX_FIFO_ADDR 0x2104 /* TX FIFO address */ +#define REG_TX_FIFO_TAG 0x2108 /* TX FIFO tag */ +#define REG_TX_FIFO_DATA_LOW 0x210C /* TX FIFO data low */ +#define REG_TX_FIFO_DATA_HI_T1 0x2110 /* TX FIFO data high t1 */ +#define REG_TX_FIFO_DATA_HI_T0 0x2114 /* TX FIFO data high t0 */ +#define REG_TX_FIFO_SIZE 0x2118 /* (ro) TX FIFO size = 0x090 = 9KB */ + +/* 9-bit register controls BIST of TX FIFO. bit set indicates that the BIST + * passed for the specified memory + */ +#define REG_TX_RAMBIST 0x211C /* TX RAMBIST control/status */ +#define TX_RAMBIST_STATE 0x01C0 /* progress state of RAMBIST + controller state machine */ +#define TX_RAMBIST_RAM33A_PASS 0x0020 /* RAM33A passed */ +#define TX_RAMBIST_RAM32A_PASS 0x0010 /* RAM32A passed */ +#define TX_RAMBIST_RAM33B_PASS 0x0008 /* RAM33B passed */ +#define TX_RAMBIST_RAM32B_PASS 0x0004 /* RAM32B passed */ +#define TX_RAMBIST_SUMMARY 0x0002 /* all RAM passed */ +#define TX_RAMBIST_START 0x0001 /* write 1 to start BIST. self + clears on completion. */ + +/** receive dma registers **/ +#define MAX_RX_DESC_RINGS 2 +#define MAX_RX_COMP_RINGS 4 + +/* receive DMA channel configuration. default: 0x80910 + * free ring size = (1 << n)*32 -> [32 - 8k] + * completion ring size = (1 << n)*128 -> [128 - 32k], n < 9 + * DEFAULT: 0x80910 + */ +#define REG_RX_CFG 0x4000 /* RX config */ +#define RX_CFG_DMA_EN 0x00000001 /* enable RX DMA. 0 stops + channel as soon as current + frame xfer has completed. + driver should disable MAC + for 200ms before disabling + RX */ +#define RX_CFG_DESC_RING_MASK 0x0000001E /* # desc entries in RX + free desc ring. + def: 0x8 = 8k */ +#define RX_CFG_DESC_RING_SHIFT 1 +#define RX_CFG_COMP_RING_MASK 0x000001E0 /* # desc entries in RX complete + ring. def: 0x8 = 32k */ +#define RX_CFG_COMP_RING_SHIFT 5 +#define RX_CFG_BATCH_DIS 0x00000200 /* disable receive desc + batching. def: 0x0 = + enabled */ +#define RX_CFG_SWIVEL_MASK 0x00001C00 /* byte offset of the 1st + data byte of the packet + w/in 8 byte boundares. + this swivels the data + DMA'ed to header + buffers, jumbo buffers + when header split is not + requested and MTU sized + buffers. def: 0x2 */ +#define RX_CFG_SWIVEL_SHIFT 10 + +/* cassini+ only */ +#define RX_CFG_DESC_RING1_MASK 0x000F0000 /* # of desc entries in + RX free desc ring 2. + def: 0x8 = 8k */ +#define RX_CFG_DESC_RING1_SHIFT 16 + + +/* the page size register allows cassini chips to do the following with + * received data: + * [--------------------------------------------------------------] page + * [off][buf1][pad][off][buf2][pad][off][buf3][pad][off][buf4][pad] + * |--------------| = PAGE_SIZE_BUFFER_STRIDE + * page = PAGE_SIZE + * offset = PAGE_SIZE_MTU_OFF + * for the above example, MTU_BUFFER_COUNT = 4. + * NOTE: as is apparent, you need to ensure that the following holds: + * MTU_BUFFER_COUNT <= PAGE_SIZE/PAGE_SIZE_BUFFER_STRIDE + * DEFAULT: 0x48002002 (8k pages) + */ +#define REG_RX_PAGE_SIZE 0x4004 /* RX page size */ +#define RX_PAGE_SIZE_MASK 0x00000003 /* size of pages pointed to + by receive descriptors. + if jumbo buffers are + supported the page size + should not be < 8k. + 0b00 = 2k, 0b01 = 4k + 0b10 = 8k, 0b11 = 16k + DEFAULT: 8k */ +#define RX_PAGE_SIZE_SHIFT 0 +#define RX_PAGE_SIZE_MTU_COUNT_MASK 0x00007800 /* # of MTU buffers the hw + packs into a page. + DEFAULT: 4 */ +#define RX_PAGE_SIZE_MTU_COUNT_SHIFT 11 +#define RX_PAGE_SIZE_MTU_STRIDE_MASK 0x18000000 /* # of bytes that separate + each MTU buffer + + offset from each + other. + 0b00 = 1k, 0b01 = 2k + 0b10 = 4k, 0b11 = 8k + DEFAULT: 0x1 */ +#define RX_PAGE_SIZE_MTU_STRIDE_SHIFT 27 +#define RX_PAGE_SIZE_MTU_OFF_MASK 0xC0000000 /* offset in each page that + hw writes the MTU buffer + into. + 0b00 = 0, + 0b01 = 64 bytes + 0b10 = 96, 0b11 = 128 + DEFAULT: 0x1 */ +#define RX_PAGE_SIZE_MTU_OFF_SHIFT 30 + +/* 11-bit counter points to next location in RX FIFO to be loaded/read. + * shadow write pointers enable retries in case of early receive aborts. + * DEFAULT: 0x0. generated on 64-bit boundaries. + */ +#define REG_RX_FIFO_WRITE_PTR 0x4008 /* RX FIFO write pointer */ +#define REG_RX_FIFO_READ_PTR 0x400C /* RX FIFO read pointer */ +#define REG_RX_IPP_FIFO_SHADOW_WRITE_PTR 0x4010 /* RX IPP FIFO shadow write + pointer */ +#define REG_RX_IPP_FIFO_SHADOW_READ_PTR 0x4014 /* RX IPP FIFO shadow read + pointer */ +#define REG_RX_IPP_FIFO_READ_PTR 0x400C /* RX IPP FIFO read + pointer. (8-bit counter) */ + +/* current state of RX DMA state engines + other info + * DEFAULT: 0x0 + */ +#define REG_RX_DEBUG 0x401C /* RX debug */ +#define RX_DEBUG_LOAD_STATE_MASK 0x0000000F /* load state machine w/ MAC: + 0x0 = idle, 0x1 = load_bop + 0x2 = load 1, 0x3 = load 2 + 0x4 = load 3, 0x5 = load 4 + 0x6 = last detect + 0x7 = wait req + 0x8 = wait req statuss 1st + 0x9 = load st + 0xa = bubble mac + 0xb = error */ +#define RX_DEBUG_LM_STATE_MASK 0x00000070 /* load state machine w/ HP and + RX FIFO: + 0x0 = idle, 0x1 = hp xfr + 0x2 = wait hp ready + 0x3 = wait flow code + 0x4 = fifo xfer + 0x5 = make status + 0x6 = csum ready + 0x7 = error */ +#define RX_DEBUG_FC_STATE_MASK 0x000000180 /* flow control state machine + w/ MAC: + 0x0 = idle + 0x1 = wait xoff ack + 0x2 = wait xon + 0x3 = wait xon ack */ +#define RX_DEBUG_DATA_STATE_MASK 0x000001E00 /* unload data state machine + states: + 0x0 = idle data + 0x1 = header begin + 0x2 = xfer header + 0x3 = xfer header ld + 0x4 = mtu begin + 0x5 = xfer mtu + 0x6 = xfer mtu ld + 0x7 = jumbo begin + 0x8 = xfer jumbo + 0x9 = xfer jumbo ld + 0xa = reas begin + 0xb = xfer reas + 0xc = flush tag + 0xd = xfer reas ld + 0xe = error + 0xf = bubble idle */ +#define RX_DEBUG_DESC_STATE_MASK 0x0001E000 /* unload desc state machine + states: + 0x0 = idle desc + 0x1 = wait ack + 0x9 = wait ack 2 + 0x2 = fetch desc 1 + 0xa = fetch desc 2 + 0x3 = load ptrs + 0x4 = wait dma + 0x5 = wait ack batch + 0x6 = post batch + 0x7 = xfr done */ +#define RX_DEBUG_INTR_READ_PTR_MASK 0x30000000 /* interrupt read ptr of the + interrupt queue */ +#define RX_DEBUG_INTR_WRITE_PTR_MASK 0xC0000000 /* interrupt write pointer + of the interrupt queue */ + +/* flow control frames are emmitted using two PAUSE thresholds: + * XOFF PAUSE uses pause time value pre-programmed in the Send PAUSE MAC reg + * XON PAUSE uses a pause time of 0. granularity of threshold is 64bytes. + * PAUSE thresholds defined in terms of FIFO occupancy and may be translated + * into FIFO vacancy using RX_FIFO_SIZE. setting ON will trigger XON frames + * when FIFO reaches 0. OFF threshold should not be > size of RX FIFO. max + * value is is 0x6F. + * DEFAULT: 0x00078 + */ +#define REG_RX_PAUSE_THRESH 0x4020 /* RX pause thresholds */ +#define RX_PAUSE_THRESH_QUANTUM 64 +#define RX_PAUSE_THRESH_OFF_MASK 0x000001FF /* XOFF PAUSE emitted when + RX FIFO occupancy > + value*64B */ +#define RX_PAUSE_THRESH_OFF_SHIFT 0 +#define RX_PAUSE_THRESH_ON_MASK 0x001FF000 /* XON PAUSE emitted after + emitting XOFF PAUSE when RX + FIFO occupancy falls below + this value*64B. must be + < XOFF threshold. if = + RX_FIFO_SIZE< XON frames are + never emitted. */ +#define RX_PAUSE_THRESH_ON_SHIFT 12 + +/* 13-bit register used to control RX desc fetching and intr generation. if 4+ + * valid RX descriptors are available, Cassini will read 4 at a time. + * writing N means that all desc up to *but* excluding N are available. N must + * be a multiple of 4 (N % 4 = 0). first desc should be cache-line aligned. + * DEFAULT: 0 on reset + */ +#define REG_RX_KICK 0x4024 /* RX kick reg */ + +/* 8KB aligned 64-bit pointer to the base of the RX free/completion rings. + * lower 13 bits of the low register are hard-wired to 0. + */ +#define REG_RX_DB_LOW 0x4028 /* RX descriptor ring + base low */ +#define REG_RX_DB_HI 0x402C /* RX descriptor ring + base hi */ +#define REG_RX_CB_LOW 0x4030 /* RX completion ring + base low */ +#define REG_RX_CB_HI 0x4034 /* RX completion ring + base hi */ +/* 13-bit register indicate desc used by cassini for receive frames. used + * for diagnostic purposes. + * DEFAULT: 0 on reset + */ +#define REG_RX_COMP 0x4038 /* (ro) RX completion */ + +/* HEAD and TAIL are used to control RX desc posting and interrupt + * generation. hw moves the head register to pass ownership to sw. sw + * moves the tail register to pass ownership back to hw. to give all + * entries to hw, set TAIL = HEAD. if HEAD and TAIL indicate that no + * more entries are available, DMA will pause and an interrupt will be + * generated to indicate no more entries are available. sw can use + * this interrupt to reduce the # of times it must update the + * completion tail register. + * DEFAULT: 0 on reset + */ +#define REG_RX_COMP_HEAD 0x403C /* RX completion head */ +#define REG_RX_COMP_TAIL 0x4040 /* RX completion tail */ + +/* values used for receive interrupt blanking. loaded each time the ISR is read + * DEFAULT: 0x00000000 + */ +#define REG_RX_BLANK 0x4044 /* RX blanking register + for ISR read */ +#define RX_BLANK_INTR_PKT_MASK 0x000001FF /* RX_DONE intr asserted if + this many sets of completion + writebacks (up to 2 packets) + occur since the last time + the ISR was read. 0 = no + packet blanking */ +#define RX_BLANK_INTR_PKT_SHIFT 0 +#define RX_BLANK_INTR_TIME_MASK 0x3FFFF000 /* RX_DONE interrupt asserted + if that many clocks were + counted since last time the + ISR was read. + each count is 512 core + clocks (125MHz). 0 = no + time blanking */ +#define RX_BLANK_INTR_TIME_SHIFT 12 + +/* values used for interrupt generation based on threshold values of how + * many free desc and completion entries are available for hw use. + * DEFAULT: 0x00000000 + */ +#define REG_RX_AE_THRESH 0x4048 /* RX almost empty + thresholds */ +#define RX_AE_THRESH_FREE_MASK 0x00001FFF /* RX_BUF_AE will be + generated if # desc + avail for hw use <= + # */ +#define RX_AE_THRESH_FREE_SHIFT 0 +#define RX_AE_THRESH_COMP_MASK 0x0FFFE000 /* RX_COMP_AE will be + generated if # of + completion entries + avail for hw use <= + # */ +#define RX_AE_THRESH_COMP_SHIFT 13 + +/* probabilities for random early drop (RED) thresholds on a FIFO threshold + * basis. probability should increase when the FIFO level increases. control + * packets are never dropped and not counted in stats. probability programmed + * on a 12.5% granularity. e.g., 0x1 = 1/8 packets dropped. + * DEFAULT: 0x00000000 + */ +#define REG_RX_RED 0x404C /* RX random early detect enable */ +#define RX_RED_4K_6K_FIFO_MASK 0x000000FF /* 4KB < FIFO thresh < 6KB */ +#define RX_RED_6K_8K_FIFO_MASK 0x0000FF00 /* 6KB < FIFO thresh < 8KB */ +#define RX_RED_8K_10K_FIFO_MASK 0x00FF0000 /* 8KB < FIFO thresh < 10KB */ +#define RX_RED_10K_12K_FIFO_MASK 0xFF000000 /* 10KB < FIFO thresh < 12KB */ + +/* FIFO fullness levels for RX FIFO, RX control FIFO, and RX IPP FIFO. + * RX control FIFO = # of packets in RX FIFO. + * DEFAULT: 0x0 + */ +#define REG_RX_FIFO_FULLNESS 0x4050 /* (ro) RX FIFO fullness */ +#define RX_FIFO_FULLNESS_RX_FIFO_MASK 0x3FF80000 /* level w/ 8B granularity */ +#define RX_FIFO_FULLNESS_IPP_FIFO_MASK 0x0007FF00 /* level w/ 8B granularity */ +#define RX_FIFO_FULLNESS_RX_PKT_MASK 0x000000FF /* # packets in RX FIFO */ +#define REG_RX_IPP_PACKET_COUNT 0x4054 /* RX IPP packet counter */ +#define REG_RX_WORK_DMA_PTR_LOW 0x4058 /* RX working DMA ptr low */ +#define REG_RX_WORK_DMA_PTR_HI 0x405C /* RX working DMA ptr + high */ + +/* BIST testing ro RX FIFO, RX control FIFO, and RX IPP FIFO. only RX BIST + * START/COMPLETE is writeable. START will clear when the BIST has completed + * checking all 17 RAMS. + * DEFAULT: 0bxxxx xxxxx xxxx xxxx xxxx x000 0000 0000 00x0 + */ +#define REG_RX_BIST 0x4060 /* (ro) RX BIST */ +#define RX_BIST_32A_PASS 0x80000000 /* RX FIFO 32A passed */ +#define RX_BIST_33A_PASS 0x40000000 /* RX FIFO 33A passed */ +#define RX_BIST_32B_PASS 0x20000000 /* RX FIFO 32B passed */ +#define RX_BIST_33B_PASS 0x10000000 /* RX FIFO 33B passed */ +#define RX_BIST_32C_PASS 0x08000000 /* RX FIFO 32C passed */ +#define RX_BIST_33C_PASS 0x04000000 /* RX FIFO 33C passed */ +#define RX_BIST_IPP_32A_PASS 0x02000000 /* RX IPP FIFO 33B passed */ +#define RX_BIST_IPP_33A_PASS 0x01000000 /* RX IPP FIFO 33A passed */ +#define RX_BIST_IPP_32B_PASS 0x00800000 /* RX IPP FIFO 32B passed */ +#define RX_BIST_IPP_33B_PASS 0x00400000 /* RX IPP FIFO 33B passed */ +#define RX_BIST_IPP_32C_PASS 0x00200000 /* RX IPP FIFO 32C passed */ +#define RX_BIST_IPP_33C_PASS 0x00100000 /* RX IPP FIFO 33C passed */ +#define RX_BIST_CTRL_32_PASS 0x00800000 /* RX CTRL FIFO 32 passed */ +#define RX_BIST_CTRL_33_PASS 0x00400000 /* RX CTRL FIFO 33 passed */ +#define RX_BIST_REAS_26A_PASS 0x00200000 /* RX Reas 26A passed */ +#define RX_BIST_REAS_26B_PASS 0x00100000 /* RX Reas 26B passed */ +#define RX_BIST_REAS_27_PASS 0x00080000 /* RX Reas 27 passed */ +#define RX_BIST_STATE_MASK 0x00078000 /* BIST state machine */ +#define RX_BIST_SUMMARY 0x00000002 /* when BIST complete, + summary pass bit + contains AND of BIST + results of all 16 + RAMS */ +#define RX_BIST_START 0x00000001 /* write 1 to start + BIST. self clears + on completion. */ + +/* next location in RX CTRL FIFO that will be loaded w/ data from RX IPP/read + * from to retrieve packet control info. + * DEFAULT: 0 + */ +#define REG_RX_CTRL_FIFO_WRITE_PTR 0x4064 /* (ro) RX control FIFO + write ptr */ +#define REG_RX_CTRL_FIFO_READ_PTR 0x4068 /* (ro) RX control FIFO read + ptr */ + +/* receive interrupt blanking. loaded each time interrupt alias register is + * read. + * DEFAULT: 0x0 + */ +#define REG_RX_BLANK_ALIAS_READ 0x406C /* RX blanking register for + alias read */ +#define RX_BAR_INTR_PACKET_MASK 0x000001FF /* assert RX_DONE if # + completion writebacks + > # since last ISR + read. 0 = no + blanking. up to 2 + packets per + completion wb. */ +#define RX_BAR_INTR_TIME_MASK 0x3FFFF000 /* assert RX_DONE if # + clocks > # since last + ISR read. each count + is 512 core clocks + (125MHz). 0 = no + blanking. */ + +/* diagnostic access to RX FIFO. 32 LSB accessed via DATA_LOW. 32 MSB accessed + * via DATA_HI_T0 or DATA_HI_T1. TAG reads the tag bit. writing HI_T0 + * will unset the tag bit while writing HI_T1 will set the tag bit. to reset + * to normal operation after diagnostics, write to address location 0x0. + * RX_DMA_EN bit must be set to 0x0 for RX FIFO PIO access. DATA_HI should + * be the last write access of a write sequence. + * DEFAULT: undefined + */ +#define REG_RX_FIFO_ADDR 0x4080 /* RX FIFO address */ +#define REG_RX_FIFO_TAG 0x4084 /* RX FIFO tag */ +#define REG_RX_FIFO_DATA_LOW 0x4088 /* RX FIFO data low */ +#define REG_RX_FIFO_DATA_HI_T0 0x408C /* RX FIFO data high T0 */ +#define REG_RX_FIFO_DATA_HI_T1 0x4090 /* RX FIFO data high T1 */ + +/* diagnostic assess to RX CTRL FIFO. 8-bit FIFO_ADDR holds address of + * 81 bit control entry and 6 bit flow id. LOW and MID are both 32-bit + * accesses. HI is 7-bits with 6-bit flow id and 1 bit control + * word. RX_DMA_EN must be 0 for RX CTRL FIFO PIO access. DATA_HI + * should be last write access of the write sequence. + * DEFAULT: undefined + */ +#define REG_RX_CTRL_FIFO_ADDR 0x4094 /* RX Control FIFO and + Batching FIFO addr */ +#define REG_RX_CTRL_FIFO_DATA_LOW 0x4098 /* RX Control FIFO data + low */ +#define REG_RX_CTRL_FIFO_DATA_MID 0x409C /* RX Control FIFO data + mid */ +#define REG_RX_CTRL_FIFO_DATA_HI 0x4100 /* RX Control FIFO data + hi and flow id */ +#define RX_CTRL_FIFO_DATA_HI_CTRL 0x0001 /* upper bit of ctrl word */ +#define RX_CTRL_FIFO_DATA_HI_FLOW_MASK 0x007E /* flow id */ + +/* diagnostic access to RX IPP FIFO. same semantics as RX_FIFO. + * DEFAULT: undefined + */ +#define REG_RX_IPP_FIFO_ADDR 0x4104 /* RX IPP FIFO address */ +#define REG_RX_IPP_FIFO_TAG 0x4108 /* RX IPP FIFO tag */ +#define REG_RX_IPP_FIFO_DATA_LOW 0x410C /* RX IPP FIFO data low */ +#define REG_RX_IPP_FIFO_DATA_HI_T0 0x4110 /* RX IPP FIFO data high + T0 */ +#define REG_RX_IPP_FIFO_DATA_HI_T1 0x4114 /* RX IPP FIFO data high + T1 */ + +/* 64-bit pointer to receive data buffer in host memory used for headers and + * small packets. MSB in high register. loaded by DMA state machine and + * increments as DMA writes receive data. only 50 LSB are incremented. top + * 13 bits taken from RX descriptor. + * DEFAULT: undefined + */ +#define REG_RX_HEADER_PAGE_PTR_LOW 0x4118 /* (ro) RX header page ptr + low */ +#define REG_RX_HEADER_PAGE_PTR_HI 0x411C /* (ro) RX header page ptr + high */ +#define REG_RX_MTU_PAGE_PTR_LOW 0x4120 /* (ro) RX MTU page pointer + low */ +#define REG_RX_MTU_PAGE_PTR_HI 0x4124 /* (ro) RX MTU page pointer + high */ + +/* PIO diagnostic access to RX reassembly DMA Table RAM. 6-bit register holds + * one of 64 79-bit locations in the RX Reassembly DMA table and the addr of + * one of the 64 byte locations in the Batching table. LOW holds 32 LSB. + * MID holds the next 32 LSB. HIGH holds the 15 MSB. RX_DMA_EN must be set + * to 0 for PIO access. DATA_HIGH should be last write of write sequence. + * layout: + * reassmbl ptr [78:15] | reassmbl index [14:1] | reassmbl entry valid [0] + * DEFAULT: undefined + */ +#define REG_RX_TABLE_ADDR 0x4128 /* RX reassembly DMA table + address */ +#define RX_TABLE_ADDR_MASK 0x0000003F /* address mask */ + +#define REG_RX_TABLE_DATA_LOW 0x412C /* RX reassembly DMA table + data low */ +#define REG_RX_TABLE_DATA_MID 0x4130 /* RX reassembly DMA table + data mid */ +#define REG_RX_TABLE_DATA_HI 0x4134 /* RX reassembly DMA table + data high */ + +/* cassini+ only */ +/* 8KB aligned 64-bit pointer to base of RX rings. lower 13 bits hardwired to + * 0. same semantics as primary desc/complete rings. + */ +#define REG_PLUS_RX_DB1_LOW 0x4200 /* RX descriptor ring + 2 base low */ +#define REG_PLUS_RX_DB1_HI 0x4204 /* RX descriptor ring + 2 base high */ +#define REG_PLUS_RX_CB1_LOW 0x4208 /* RX completion ring + 2 base low. 4 total */ +#define REG_PLUS_RX_CB1_HI 0x420C /* RX completion ring + 2 base high. 4 total */ +#define REG_PLUS_RX_CBN_LOW(x) (REG_PLUS_RX_CB1_LOW + 8*((x) - 1)) +#define REG_PLUS_RX_CBN_HI(x) (REG_PLUS_RX_CB1_HI + 8*((x) - 1)) +#define REG_PLUS_RX_KICK1 0x4220 /* RX Kick 2 register */ +#define REG_PLUS_RX_COMP1 0x4224 /* (ro) RX completion 2 + reg */ +#define REG_PLUS_RX_COMP1_HEAD 0x4228 /* (ro) RX completion 2 + head reg. 4 total. */ +#define REG_PLUS_RX_COMP1_TAIL 0x422C /* RX completion 2 + tail reg. 4 total. */ +#define REG_PLUS_RX_COMPN_HEAD(x) (REG_PLUS_RX_COMP1_HEAD + 8*((x) - 1)) +#define REG_PLUS_RX_COMPN_TAIL(x) (REG_PLUS_RX_COMP1_TAIL + 8*((x) - 1)) +#define REG_PLUS_RX_AE1_THRESH 0x4240 /* RX almost empty 2 + thresholds */ +#define RX_AE1_THRESH_FREE_MASK RX_AE_THRESH_FREE_MASK +#define RX_AE1_THRESH_FREE_SHIFT RX_AE_THRESH_FREE_SHIFT + +/** header parser registers **/ + +/* RX parser configuration register. + * DEFAULT: 0x1651004 + */ +#define REG_HP_CFG 0x4140 /* header parser + configuration reg */ +#define HP_CFG_PARSE_EN 0x00000001 /* enab header parsing */ +#define HP_CFG_NUM_CPU_MASK 0x000000FC /* # processors + 0 = 64. 0x3f = 63 */ +#define HP_CFG_NUM_CPU_SHIFT 2 +#define HP_CFG_SYN_INC_MASK 0x00000100 /* SYN bit won't increment + TCP seq # by one when + stored in FDBM */ +#define HP_CFG_TCP_THRESH_MASK 0x000FFE00 /* # bytes of TCP data + needed to be considered + for reassembly */ +#define HP_CFG_TCP_THRESH_SHIFT 9 + +/* access to RX Instruction RAM. 5-bit register/counter holds addr + * of 39 bit entry to be read/written. 32 LSB in _DATA_LOW. 7 MSB in _DATA_HI. + * RX_DMA_EN must be 0 for RX instr PIO access. DATA_HI should be last access + * of sequence. + * DEFAULT: undefined + */ +#define REG_HP_INSTR_RAM_ADDR 0x4144 /* HP instruction RAM + address */ +#define HP_INSTR_RAM_ADDR_MASK 0x01F /* 5-bit mask */ +#define REG_HP_INSTR_RAM_DATA_LOW 0x4148 /* HP instruction RAM + data low */ +#define HP_INSTR_RAM_LOW_OUTMASK_MASK 0x0000FFFF +#define HP_INSTR_RAM_LOW_OUTMASK_SHIFT 0 +#define HP_INSTR_RAM_LOW_OUTSHIFT_MASK 0x000F0000 +#define HP_INSTR_RAM_LOW_OUTSHIFT_SHIFT 16 +#define HP_INSTR_RAM_LOW_OUTEN_MASK 0x00300000 +#define HP_INSTR_RAM_LOW_OUTEN_SHIFT 20 +#define HP_INSTR_RAM_LOW_OUTARG_MASK 0xFFC00000 +#define HP_INSTR_RAM_LOW_OUTARG_SHIFT 22 +#define REG_HP_INSTR_RAM_DATA_MID 0x414C /* HP instruction RAM + data mid */ +#define HP_INSTR_RAM_MID_OUTARG_MASK 0x00000003 +#define HP_INSTR_RAM_MID_OUTARG_SHIFT 0 +#define HP_INSTR_RAM_MID_OUTOP_MASK 0x0000003C +#define HP_INSTR_RAM_MID_OUTOP_SHIFT 2 +#define HP_INSTR_RAM_MID_FNEXT_MASK 0x000007C0 +#define HP_INSTR_RAM_MID_FNEXT_SHIFT 6 +#define HP_INSTR_RAM_MID_FOFF_MASK 0x0003F800 +#define HP_INSTR_RAM_MID_FOFF_SHIFT 11 +#define HP_INSTR_RAM_MID_SNEXT_MASK 0x007C0000 +#define HP_INSTR_RAM_MID_SNEXT_SHIFT 18 +#define HP_INSTR_RAM_MID_SOFF_MASK 0x3F800000 +#define HP_INSTR_RAM_MID_SOFF_SHIFT 23 +#define HP_INSTR_RAM_MID_OP_MASK 0xC0000000 +#define HP_INSTR_RAM_MID_OP_SHIFT 30 +#define REG_HP_INSTR_RAM_DATA_HI 0x4150 /* HP instruction RAM + data high */ +#define HP_INSTR_RAM_HI_VAL_MASK 0x0000FFFF +#define HP_INSTR_RAM_HI_VAL_SHIFT 0 +#define HP_INSTR_RAM_HI_MASK_MASK 0xFFFF0000 +#define HP_INSTR_RAM_HI_MASK_SHIFT 16 + +/* PIO access into RX Header parser data RAM and flow database. + * 11-bit register. Data fills the LSB portion of bus if less than 32 bits. + * DATA_RAM: write RAM_FDB_DATA with index to access DATA_RAM. + * RAM bytes = 4*(x - 1) + [3:0]. e.g., 0 -> [3:0], 31 -> [123:120] + * FLOWDB: write DATA_RAM_FDB register and then read/write FDB1-12 to access + * flow database. + * RX_DMA_EN must be 0 for RX parser RAM PIO access. RX Parser RAM data reg + * should be the last write access of the write sequence. + * DEFAULT: undefined + */ +#define REG_HP_DATA_RAM_FDB_ADDR 0x4154 /* HP data and FDB + RAM address */ +#define HP_DATA_RAM_FDB_DATA_MASK 0x001F /* select 1 of 86 byte + locations in header + parser data ram to + read/write */ +#define HP_DATA_RAM_FDB_FDB_MASK 0x3F00 /* 1 of 64 353-bit locations + in the flow database */ +#define REG_HP_DATA_RAM_DATA 0x4158 /* HP data RAM data */ + +/* HP flow database registers: 1 - 12, 0x415C - 0x4188, 4 8-bit bytes + * FLOW_DB(1) = IP_SA[127:96], FLOW_DB(2) = IP_SA[95:64] + * FLOW_DB(3) = IP_SA[63:32], FLOW_DB(4) = IP_SA[31:0] + * FLOW_DB(5) = IP_DA[127:96], FLOW_DB(6) = IP_DA[95:64] + * FLOW_DB(7) = IP_DA[63:32], FLOW_DB(8) = IP_DA[31:0] + * FLOW_DB(9) = {TCP_SP[15:0],TCP_DP[15:0]} + * FLOW_DB(10) = bit 0 has value for flow valid + * FLOW_DB(11) = TCP_SEQ[63:32], FLOW_DB(12) = TCP_SEQ[31:0] + */ +#define REG_HP_FLOW_DB0 0x415C /* HP flow database 1 reg */ +#define REG_HP_FLOW_DBN(x) (REG_HP_FLOW_DB0 + (x)*4) + +/* diagnostics for RX Header Parser block. + * ASUN: the header parser state machine register is used for diagnostics + * purposes. however, the spec doesn't have any details on it. + */ +#define REG_HP_STATE_MACHINE 0x418C /* (ro) HP state machine */ +#define REG_HP_STATUS0 0x4190 /* (ro) HP status 1 */ +#define HP_STATUS0_SAP_MASK 0xFFFF0000 /* SAP */ +#define HP_STATUS0_L3_OFF_MASK 0x0000FE00 /* L3 offset */ +#define HP_STATUS0_LB_CPUNUM_MASK 0x000001F8 /* load balancing CPU + number */ +#define HP_STATUS0_HRP_OPCODE_MASK 0x00000007 /* HRP opcode */ + +#define REG_HP_STATUS1 0x4194 /* (ro) HP status 2 */ +#define HP_STATUS1_ACCUR2_MASK 0xE0000000 /* accu R2[6:4] */ +#define HP_STATUS1_FLOWID_MASK 0x1F800000 /* flow id */ +#define HP_STATUS1_TCP_OFF_MASK 0x007F0000 /* tcp payload offset */ +#define HP_STATUS1_TCP_SIZE_MASK 0x0000FFFF /* tcp payload size */ + +#define REG_HP_STATUS2 0x4198 /* (ro) HP status 3 */ +#define HP_STATUS2_ACCUR2_MASK 0xF0000000 /* accu R2[3:0] */ +#define HP_STATUS2_CSUM_OFF_MASK 0x07F00000 /* checksum start + start offset */ +#define HP_STATUS2_ACCUR1_MASK 0x000FE000 /* accu R1 */ +#define HP_STATUS2_FORCE_DROP 0x00001000 /* force drop */ +#define HP_STATUS2_BWO_REASSM 0x00000800 /* batching w/o + reassembly */ +#define HP_STATUS2_JH_SPLIT_EN 0x00000400 /* jumbo header split + enable */ +#define HP_STATUS2_FORCE_TCP_NOCHECK 0x00000200 /* force tcp no payload + check */ +#define HP_STATUS2_DATA_MASK_ZERO 0x00000100 /* mask of data length + equal to zero */ +#define HP_STATUS2_FORCE_TCP_CHECK 0x00000080 /* force tcp payload + chk */ +#define HP_STATUS2_MASK_TCP_THRESH 0x00000040 /* mask of payload + threshold */ +#define HP_STATUS2_NO_ASSIST 0x00000020 /* no assist */ +#define HP_STATUS2_CTRL_PACKET_FLAG 0x00000010 /* control packet flag */ +#define HP_STATUS2_TCP_FLAG_CHECK 0x00000008 /* tcp flag check */ +#define HP_STATUS2_SYN_FLAG 0x00000004 /* syn flag */ +#define HP_STATUS2_TCP_CHECK 0x00000002 /* tcp payload chk */ +#define HP_STATUS2_TCP_NOCHECK 0x00000001 /* tcp no payload chk */ + +/* BIST for header parser(HP) and flow database memories (FDBM). set _START + * to start BIST. controller clears _START on completion. _START can also + * be cleared to force termination of BIST. a bit set indicates that that + * memory passed its BIST. + */ +#define REG_HP_RAM_BIST 0x419C /* HP RAM BIST reg */ +#define HP_RAM_BIST_HP_DATA_PASS 0x80000000 /* HP data ram */ +#define HP_RAM_BIST_HP_INSTR0_PASS 0x40000000 /* HP instr ram 0 */ +#define HP_RAM_BIST_HP_INSTR1_PASS 0x20000000 /* HP instr ram 1 */ +#define HP_RAM_BIST_HP_INSTR2_PASS 0x10000000 /* HP instr ram 2 */ +#define HP_RAM_BIST_FDBM_AGE0_PASS 0x08000000 /* FDBM aging RAM0 */ +#define HP_RAM_BIST_FDBM_AGE1_PASS 0x04000000 /* FDBM aging RAM1 */ +#define HP_RAM_BIST_FDBM_FLOWID00_PASS 0x02000000 /* FDBM flowid RAM0 + bank 0 */ +#define HP_RAM_BIST_FDBM_FLOWID10_PASS 0x01000000 /* FDBM flowid RAM1 + bank 0 */ +#define HP_RAM_BIST_FDBM_FLOWID20_PASS 0x00800000 /* FDBM flowid RAM2 + bank 0 */ +#define HP_RAM_BIST_FDBM_FLOWID30_PASS 0x00400000 /* FDBM flowid RAM3 + bank 0 */ +#define HP_RAM_BIST_FDBM_FLOWID01_PASS 0x00200000 /* FDBM flowid RAM0 + bank 1 */ +#define HP_RAM_BIST_FDBM_FLOWID11_PASS 0x00100000 /* FDBM flowid RAM1 + bank 2 */ +#define HP_RAM_BIST_FDBM_FLOWID21_PASS 0x00080000 /* FDBM flowid RAM2 + bank 1 */ +#define HP_RAM_BIST_FDBM_FLOWID31_PASS 0x00040000 /* FDBM flowid RAM3 + bank 1 */ +#define HP_RAM_BIST_FDBM_TCPSEQ_PASS 0x00020000 /* FDBM tcp sequence + RAM */ +#define HP_RAM_BIST_SUMMARY 0x00000002 /* all BIST tests */ +#define HP_RAM_BIST_START 0x00000001 /* start/stop BIST */ + + +/** MAC registers. **/ +/* reset bits are set using a PIO write and self-cleared after the command + * execution has completed. + */ +#define REG_MAC_TX_RESET 0x6000 /* TX MAC software reset + command (default: 0x0) */ +#define REG_MAC_RX_RESET 0x6004 /* RX MAC software reset + command (default: 0x0) */ +/* execute a pause flow control frame transmission + DEFAULT: 0x0XXXX */ +#define REG_MAC_SEND_PAUSE 0x6008 /* send pause command reg */ +#define MAC_SEND_PAUSE_TIME_MASK 0x0000FFFF /* value of pause time + to be sent on network + in units of slot + times */ +#define MAC_SEND_PAUSE_SEND 0x00010000 /* send pause flow ctrl + frame on network */ + +/* bit set indicates that event occurred. auto-cleared when status register + * is read and have corresponding mask bits in mask register. events will + * trigger an interrupt if the corresponding mask bit is 0. + * status register default: 0x00000000 + * mask register default = 0xFFFFFFFF on reset + */ +#define REG_MAC_TX_STATUS 0x6010 /* TX MAC status reg */ +#define MAC_TX_FRAME_XMIT 0x0001 /* successful frame + transmision */ +#define MAC_TX_UNDERRUN 0x0002 /* terminated frame + transmission due to + data starvation in the + xmit data path */ +#define MAC_TX_MAX_PACKET_ERR 0x0004 /* frame exceeds max allowed + length passed to TX MAC + by the DMA engine */ +#define MAC_TX_COLL_NORMAL 0x0008 /* rollover of the normal + collision counter */ +#define MAC_TX_COLL_EXCESS 0x0010 /* rollover of the excessive + collision counter */ +#define MAC_TX_COLL_LATE 0x0020 /* rollover of the late + collision counter */ +#define MAC_TX_COLL_FIRST 0x0040 /* rollover of the first + collision counter */ +#define MAC_TX_DEFER_TIMER 0x0080 /* rollover of the defer + timer */ +#define MAC_TX_PEAK_ATTEMPTS 0x0100 /* rollover of the peak + attempts counter */ + +#define REG_MAC_RX_STATUS 0x6014 /* RX MAC status reg */ +#define MAC_RX_FRAME_RECV 0x0001 /* successful receipt of + a frame */ +#define MAC_RX_OVERFLOW 0x0002 /* dropped frame due to + RX FIFO overflow */ +#define MAC_RX_FRAME_COUNT 0x0004 /* rollover of receive frame + counter */ +#define MAC_RX_ALIGN_ERR 0x0008 /* rollover of alignment + error counter */ +#define MAC_RX_CRC_ERR 0x0010 /* rollover of crc error + counter */ +#define MAC_RX_LEN_ERR 0x0020 /* rollover of length + error counter */ +#define MAC_RX_VIOL_ERR 0x0040 /* rollover of code + violation error */ + +/* DEFAULT: 0xXXXX0000 on reset */ +#define REG_MAC_CTRL_STATUS 0x6018 /* MAC control status reg */ +#define MAC_CTRL_PAUSE_RECEIVED 0x00000001 /* successful + reception of a + pause control + frame */ +#define MAC_CTRL_PAUSE_STATE 0x00000002 /* MAC has made a + transition from + "not paused" to + "paused" */ +#define MAC_CTRL_NOPAUSE_STATE 0x00000004 /* MAC has made a + transition from + "paused" to "not + paused" */ +#define MAC_CTRL_PAUSE_TIME_MASK 0xFFFF0000 /* value of pause time + operand that was + received in the last + pause flow control + frame */ + +/* layout identical to TX MAC[8:0] */ +#define REG_MAC_TX_MASK 0x6020 /* TX MAC mask reg */ +/* layout identical to RX MAC[6:0] */ +#define REG_MAC_RX_MASK 0x6024 /* RX MAC mask reg */ +/* layout identical to CTRL MAC[2:0] */ +#define REG_MAC_CTRL_MASK 0x6028 /* MAC control mask reg */ + +/* to ensure proper operation, CFG_EN must be cleared to 0 and a delay + * imposed before writes to other bits in the TX_MAC_CFG register or any of + * the MAC parameters is performed. delay dependent upon time required to + * transmit a maximum size frame (= MAC_FRAMESIZE_MAX*8/Mbps). e.g., + * the delay for a 1518-byte frame on a 100Mbps network is 125us. + * alternatively, just poll TX_CFG_EN until it reads back as 0. + * NOTE: on half-duplex 1Gbps, TX_CFG_CARRIER_EXTEND and + * RX_CFG_CARRIER_EXTEND should be set and the SLOT_TIME register should + * be 0x200 (slot time of 512 bytes) + */ +#define REG_MAC_TX_CFG 0x6030 /* TX MAC config reg */ +#define MAC_TX_CFG_EN 0x0001 /* enable TX MAC. 0 will + force TXMAC state + machine to remain in + idle state or to + transition to idle state + on completion of an + ongoing packet. */ +#define MAC_TX_CFG_IGNORE_CARRIER 0x0002 /* disable CSMA/CD deferral + process. set to 1 when + full duplex and 0 when + half duplex */ +#define MAC_TX_CFG_IGNORE_COLL 0x0004 /* disable CSMA/CD backoff + algorithm. set to 1 when + full duplex and 0 when + half duplex */ +#define MAC_TX_CFG_IPG_EN 0x0008 /* enable extension of the + Rx-to-TX IPG. after + receiving a frame, TX + MAC will reset its + deferral process to + carrier sense for the + amount of time = IPG0 + + IPG1 and commit to + transmission for time + specified in IPG2. when + 0 or when xmitting frames + back-to-pack (Tx-to-Tx + IPG), TX MAC ignores + IPG0 and will only use + IPG1 for deferral time. + IPG2 still used. */ +#define MAC_TX_CFG_NEVER_GIVE_UP_EN 0x0010 /* TX MAC will not easily + give up on frame + xmission. if backoff + algorithm reaches the + ATTEMPT_LIMIT, it will + clear attempts counter + and continue trying to + send the frame as + specified by + GIVE_UP_LIM. when 0, + TX MAC will execute + standard CSMA/CD prot. */ +#define MAC_TX_CFG_NEVER_GIVE_UP_LIM 0x0020 /* when set, TX MAC will + continue to try to xmit + until successful. when + 0, TX MAC will continue + to try xmitting until + successful or backoff + algorithm reaches + ATTEMPT_LIMIT*16 */ +#define MAC_TX_CFG_NO_BACKOFF 0x0040 /* modify CSMA/CD to disable + backoff algorithm. TX + MAC will not back off + after a xmission attempt + that resulted in a + collision. */ +#define MAC_TX_CFG_SLOW_DOWN 0x0080 /* modify CSMA/CD so that + deferral process is reset + in response to carrier + sense during the entire + duration of IPG. TX MAC + will only commit to frame + xmission after frame + xmission has actually + begun. */ +#define MAC_TX_CFG_NO_FCS 0x0100 /* TX MAC will not generate + CRC for all xmitted + packets. when clear, CRC + generation is dependent + upon NO_CRC bit in the + xmit control word from + TX DMA */ +#define MAC_TX_CFG_CARRIER_EXTEND 0x0200 /* enables xmit part of the + carrier extension + feature. this allows for + longer collision domains + by extending the carrier + and collision window + from the end of FCS until + the end of the slot time + if necessary. Required + for half-duplex at 1Gbps, + clear otherwise. */ + +/* when CRC is not stripped, reassembly packets will not contain the CRC. + * these will be stripped by HRP because it reassembles layer 4 data, and the + * CRC is layer 2. however, non-reassembly packets will still contain the CRC + * when passed to the host. to ensure proper operation, need to wait 3.2ms + * after clearing RX_CFG_EN before writing to any other RX MAC registers + * or other MAC parameters. alternatively, poll RX_CFG_EN until it clears + * to 0. similary, HASH_FILTER_EN and ADDR_FILTER_EN have the same + * restrictions as CFG_EN. + */ +#define REG_MAC_RX_CFG 0x6034 /* RX MAC config reg */ +#define MAC_RX_CFG_EN 0x0001 /* enable RX MAC */ +#define MAC_RX_CFG_STRIP_PAD 0x0002 /* always program to 0. + feature not supported */ +#define MAC_RX_CFG_STRIP_FCS 0x0004 /* RX MAC will strip the + last 4 bytes of a + received frame. */ +#define MAC_RX_CFG_PROMISC_EN 0x0008 /* promiscuous mode */ +#define MAC_RX_CFG_PROMISC_GROUP_EN 0x0010 /* accept all valid + multicast frames (group + bit in DA field set) */ +#define MAC_RX_CFG_HASH_FILTER_EN 0x0020 /* use hash table to filter + multicast addresses */ +#define MAC_RX_CFG_ADDR_FILTER_EN 0x0040 /* cause RX MAC to use + address filtering regs + to filter both unicast + and multicast + addresses */ +#define MAC_RX_CFG_DISABLE_DISCARD 0x0080 /* pass errored frames to + RX DMA by setting BAD + bit but not Abort bit + in the status. CRC, + framing, and length errs + will not increment + error counters. frames + which don't match dest + addr will be passed up + w/ BAD bit set. */ +#define MAC_RX_CFG_CARRIER_EXTEND 0x0100 /* enable reception of + packet bursts generated + by carrier extension + with packet bursting + senders. only applies + to half-duplex 1Gbps */ + +/* DEFAULT: 0x0 */ +#define REG_MAC_CTRL_CFG 0x6038 /* MAC control config reg */ +#define MAC_CTRL_CFG_SEND_PAUSE_EN 0x0001 /* respond to requests for + sending pause flow ctrl + frames */ +#define MAC_CTRL_CFG_RECV_PAUSE_EN 0x0002 /* respond to received + pause flow ctrl frames */ +#define MAC_CTRL_CFG_PASS_CTRL 0x0004 /* pass valid MAC ctrl + packets to RX DMA */ + +/* to ensure proper operation, a global initialization sequence should be + * performed when a loopback config is entered or exited. if programmed after + * a hw or global sw reset, RX/TX MAC software reset and initialization + * should be done to ensure stable clocking. + * DEFAULT: 0x0 + */ +#define REG_MAC_XIF_CFG 0x603C /* XIF config reg */ +#define MAC_XIF_TX_MII_OUTPUT_EN 0x0001 /* enable output drivers + on MII xmit bus */ +#define MAC_XIF_MII_INT_LOOPBACK 0x0002 /* loopback GMII xmit data + path to GMII recv data + path. phy mode register + clock selection must be + set to GMII mode and + GMII_MODE should be set + to 1. in loopback mode, + REFCLK will drive the + entire mac core. 0 for + normal operation. */ +#define MAC_XIF_DISABLE_ECHO 0x0004 /* disables receive data + path during packet + xmission. clear to 0 + in any full duplex mode, + in any loopback mode, + or in half-duplex SERDES + or SLINK modes. set when + in half-duplex when + using external phy. */ +#define MAC_XIF_GMII_MODE 0x0008 /* MAC operates with GMII + clocks and datapath */ +#define MAC_XIF_MII_BUFFER_OUTPUT_EN 0x0010 /* MII_BUF_EN pin. enable + external tristate buffer + on the MII receive + bus. */ +#define MAC_XIF_LINK_LED 0x0020 /* LINKLED# active (low) */ +#define MAC_XIF_FDPLX_LED 0x0040 /* FDPLXLED# active (low) */ + +#define REG_MAC_IPG0 0x6040 /* inter-packet gap0 reg. + recommended: 0x00 */ +#define REG_MAC_IPG1 0x6044 /* inter-packet gap1 reg + recommended: 0x08 */ +#define REG_MAC_IPG2 0x6048 /* inter-packet gap2 reg + recommended: 0x04 */ +#define REG_MAC_SLOT_TIME 0x604C /* slot time reg + recommended: 0x40 */ +#define REG_MAC_FRAMESIZE_MIN 0x6050 /* min frame size reg + recommended: 0x40 */ + +/* FRAMESIZE_MAX holds both the max frame size as well as the max burst size. + * recommended value: 0x2000.05EE + */ +#define REG_MAC_FRAMESIZE_MAX 0x6054 /* max frame size reg */ +#define MAC_FRAMESIZE_MAX_BURST_MASK 0x3FFF0000 /* max burst size */ +#define MAC_FRAMESIZE_MAX_BURST_SHIFT 16 +#define MAC_FRAMESIZE_MAX_FRAME_MASK 0x00007FFF /* max frame size */ +#define MAC_FRAMESIZE_MAX_FRAME_SHIFT 0 +#define REG_MAC_PA_SIZE 0x6058 /* PA size reg. number of + preamble bytes that the + TX MAC will xmit at the + beginning of each frame + value should be 2 or + greater. recommended + value: 0x07 */ +#define REG_MAC_JAM_SIZE 0x605C /* jam size reg. duration + of jam in units of media + byte time. recommended + value: 0x04 */ +#define REG_MAC_ATTEMPT_LIMIT 0x6060 /* attempt limit reg. # + of attempts TX MAC will + make to xmit a frame + before it resets its + attempts counter. after + the limit has been + reached, TX MAC may or + may not drop the frame + dependent upon value + in TX_MAC_CFG. + recommended + value: 0x10 */ +#define REG_MAC_CTRL_TYPE 0x6064 /* MAC control type reg. + type field of a MAC + ctrl frame. recommended + value: 0x8808 */ + +/* mac address registers: 0 - 44, 0x6080 - 0x6130, 4 8-bit bytes. + * register contains comparison + * 0 16 MSB of primary MAC addr [47:32] of DA field + * 1 16 middle bits "" [31:16] of DA field + * 2 16 LSB "" [15:0] of DA field + * 3*x 16MSB of alt MAC addr 1-15 [47:32] of DA field + * 4*x 16 middle bits "" [31:16] + * 5*x 16 LSB "" [15:0] + * 42 16 MSB of MAC CTRL addr [47:32] of DA. + * 43 16 middle bits "" [31:16] + * 44 16 LSB "" [15:0] + * MAC CTRL addr must be the reserved multicast addr for MAC CTRL frames. + * if there is a match, MAC will set the bit for alternative address + * filter pass [15] + + * here is the map of registers given MAC address notation: a:b:c:d:e:f + * ab cd ef + * primary addr reg 2 reg 1 reg 0 + * alt addr 1 reg 5 reg 4 reg 3 + * alt addr x reg 5*x reg 4*x reg 3*x + * ctrl addr reg 44 reg 43 reg 42 + */ +#define REG_MAC_ADDR0 0x6080 /* MAC address 0 reg */ +#define REG_MAC_ADDRN(x) (REG_MAC_ADDR0 + (x)*4) +#define REG_MAC_ADDR_FILTER0 0x614C /* address filter 0 reg + [47:32] */ +#define REG_MAC_ADDR_FILTER1 0x6150 /* address filter 1 reg + [31:16] */ +#define REG_MAC_ADDR_FILTER2 0x6154 /* address filter 2 reg + [15:0] */ +#define REG_MAC_ADDR_FILTER2_1_MASK 0x6158 /* address filter 2 and 1 + mask reg. 8-bit reg + contains nibble mask for + reg 2 and 1. */ +#define REG_MAC_ADDR_FILTER0_MASK 0x615C /* address filter 0 mask + reg */ + +/* hash table registers: 0 - 15, 0x6160 - 0x619C, 4 8-bit bytes + * 16-bit registers contain bits of the hash table. + * reg x -> [16*(15 - x) + 15 : 16*(15 - x)]. + * e.g., 15 -> [15:0], 0 -> [255:240] + */ +#define REG_MAC_HASH_TABLE0 0x6160 /* hash table 0 reg */ +#define REG_MAC_HASH_TABLEN(x) (REG_MAC_HASH_TABLE0 + (x)*4) + +/* statistics registers. these registers generate an interrupt on + * overflow. recommended initialization: 0x0000. most are 16-bits except + * for PEAK_ATTEMPTS register which is 8 bits. + */ +#define REG_MAC_COLL_NORMAL 0x61A0 /* normal collision + counter. */ +#define REG_MAC_COLL_FIRST 0x61A4 /* first attempt + successful collision + counter */ +#define REG_MAC_COLL_EXCESS 0x61A8 /* excessive collision + counter */ +#define REG_MAC_COLL_LATE 0x61AC /* late collision counter */ +#define REG_MAC_TIMER_DEFER 0x61B0 /* defer timer. time base + is the media byte + clock/256 */ +#define REG_MAC_ATTEMPTS_PEAK 0x61B4 /* peak attempts reg */ +#define REG_MAC_RECV_FRAME 0x61B8 /* receive frame counter */ +#define REG_MAC_LEN_ERR 0x61BC /* length error counter */ +#define REG_MAC_ALIGN_ERR 0x61C0 /* alignment error counter */ +#define REG_MAC_FCS_ERR 0x61C4 /* FCS error counter */ +#define REG_MAC_RX_CODE_ERR 0x61C8 /* RX code violation + error counter */ + +/* misc registers */ +#define REG_MAC_RANDOM_SEED 0x61CC /* random number seed reg. + 10-bit register used as a + seed for the random number + generator for the CSMA/CD + backoff algorithm. only + programmed after power-on + reset and should be a + random value which has a + high likelihood of being + unique for each MAC + attached to a network + segment (e.g., 10 LSB of + MAC address) */ + +/* ASUN: there's a PAUSE_TIMER (ro) described, but it's not in the address + * map + */ + +/* 27-bit register has the current state for key state machines in the MAC */ +#define REG_MAC_STATE_MACHINE 0x61D0 /* (ro) state machine reg */ +#define MAC_SM_RLM_MASK 0x07800000 +#define MAC_SM_RLM_SHIFT 23 +#define MAC_SM_RX_FC_MASK 0x00700000 +#define MAC_SM_RX_FC_SHIFT 20 +#define MAC_SM_TLM_MASK 0x000F0000 +#define MAC_SM_TLM_SHIFT 16 +#define MAC_SM_ENCAP_SM_MASK 0x0000F000 +#define MAC_SM_ENCAP_SM_SHIFT 12 +#define MAC_SM_TX_REQ_MASK 0x00000C00 +#define MAC_SM_TX_REQ_SHIFT 10 +#define MAC_SM_TX_FC_MASK 0x000003C0 +#define MAC_SM_TX_FC_SHIFT 6 +#define MAC_SM_FIFO_WRITE_SEL_MASK 0x00000038 +#define MAC_SM_FIFO_WRITE_SEL_SHIFT 3 +#define MAC_SM_TX_FIFO_EMPTY_MASK 0x00000007 +#define MAC_SM_TX_FIFO_EMPTY_SHIFT 0 + +/** MIF registers. the MIF can be programmed in either bit-bang or + * frame mode. + **/ +#define REG_MIF_BIT_BANG_CLOCK 0x6200 /* MIF bit-bang clock. + 1 -> 0 will generate a + rising edge. 0 -> 1 will + generate a falling edge. */ +#define REG_MIF_BIT_BANG_DATA 0x6204 /* MIF bit-bang data. 1-bit + register generates data */ +#define REG_MIF_BIT_BANG_OUTPUT_EN 0x6208 /* MIF bit-bang output + enable. enable when + xmitting data from MIF to + transceiver. */ + +/* 32-bit register serves as an instruction register when the MIF is + * programmed in frame mode. load this register w/ a valid instruction + * (as per IEEE 802.3u MII spec). poll this register to check for instruction + * execution completion. during a read operation, this register will also + * contain the 16-bit data returned by the tranceiver. unless specified + * otherwise, fields are considered "don't care" when polling for + * completion. + */ +#define REG_MIF_FRAME 0x620C /* MIF frame/output reg */ +#define MIF_FRAME_START_MASK 0xC0000000 /* start of frame. + load w/ 01 when + issuing an instr */ +#define MIF_FRAME_ST 0x40000000 /* STart of frame */ +#define MIF_FRAME_OPCODE_MASK 0x30000000 /* opcode. 01 for a + write. 10 for a + read */ +#define MIF_FRAME_OP_READ 0x20000000 /* read OPcode */ +#define MIF_FRAME_OP_WRITE 0x10000000 /* write OPcode */ +#define MIF_FRAME_PHY_ADDR_MASK 0x0F800000 /* phy address. when + issuing an instr, + this field should be + loaded w/ the XCVR + addr */ +#define MIF_FRAME_PHY_ADDR_SHIFT 23 +#define MIF_FRAME_REG_ADDR_MASK 0x007C0000 /* register address. + when issuing an instr, + addr of register + to be read/written */ +#define MIF_FRAME_REG_ADDR_SHIFT 18 +#define MIF_FRAME_TURN_AROUND_MSB 0x00020000 /* turn around, MSB. + when issuing an instr, + set this bit to 1 */ +#define MIF_FRAME_TURN_AROUND_LSB 0x00010000 /* turn around, LSB. + when issuing an instr, + set this bit to 0. + when polling for + completion, 1 means + that instr execution + has been completed */ +#define MIF_FRAME_DATA_MASK 0x0000FFFF /* instruction payload + load with 16-bit data + to be written in + transceiver reg for a + write. doesn't matter + in a read. when + polling for + completion, field is + "don't care" for write + and 16-bit data + returned by the + transceiver for a + read (if valid bit + is set) */ +#define REG_MIF_CFG 0x6210 /* MIF config reg */ +#define MIF_CFG_PHY_SELECT 0x0001 /* 1 -> select MDIO_1 + 0 -> select MDIO_0 */ +#define MIF_CFG_POLL_EN 0x0002 /* enable polling + mechanism. if set, + BB_MODE should be 0 */ +#define MIF_CFG_BB_MODE 0x0004 /* 1 -> bit-bang mode + 0 -> frame mode */ +#define MIF_CFG_POLL_REG_MASK 0x00F8 /* register address to be + used by polling mode. + only meaningful if POLL_EN + is set to 1 */ +#define MIF_CFG_POLL_REG_SHIFT 3 +#define MIF_CFG_MDIO_0 0x0100 /* (ro) dual purpose. + when MDIO_0 is idle, + 1 -> tranceiver is + connected to MDIO_0. + when MIF is communicating + w/ MDIO_0 in bit-bang + mode, this bit indicates + the incoming bit stream + during a read op */ +#define MIF_CFG_MDIO_1 0x0200 /* (ro) dual purpose. + when MDIO_1 is idle, + 1 -> transceiver is + connected to MDIO_1. + when MIF is communicating + w/ MDIO_1 in bit-bang + mode, this bit indicates + the incoming bit stream + during a read op */ +#define MIF_CFG_POLL_PHY_MASK 0x7C00 /* tranceiver address to + be polled */ +#define MIF_CFG_POLL_PHY_SHIFT 10 + +/* 16-bit register used to determine which bits in the POLL_STATUS portion of + * the MIF_STATUS register will cause an interrupt. if a mask bit is 0, + * corresponding bit of the POLL_STATUS will generate a MIF interrupt when + * set. DEFAULT: 0xFFFF + */ +#define REG_MIF_MASK 0x6214 /* MIF mask reg */ + +/* 32-bit register used when in poll mode. auto-cleared after being read */ +#define REG_MIF_STATUS 0x6218 /* MIF status reg */ +#define MIF_STATUS_POLL_DATA_MASK 0xFFFF0000 /* poll data contains + the "latest image" + update of the XCVR + reg being read */ +#define MIF_STATUS_POLL_DATA_SHIFT 16 +#define MIF_STATUS_POLL_STATUS_MASK 0x0000FFFF /* poll status indicates + which bits in the + POLL_DATA field have + changed since the + MIF_STATUS reg was + last read */ +#define MIF_STATUS_POLL_STATUS_SHIFT 0 + +/* 7-bit register has current state for all state machines in the MIF */ +#define REG_MIF_STATE_MACHINE 0x621C /* MIF state machine reg */ +#define MIF_SM_CONTROL_MASK 0x07 /* control state machine + state */ +#define MIF_SM_EXECUTION_MASK 0x60 /* execution state machine + state */ + +/** PCS/Serialink. the following registers are equivalent to the standard + * MII management registers except that they're directly mapped in + * Cassini's register space. + **/ + +/* the auto-negotiation enable bit should be programmed the same at + * the link partner as in the local device to enable auto-negotiation to + * complete. when that bit is reprogrammed, auto-neg/manual config is + * restarted automatically. + * DEFAULT: 0x1040 + */ +#define REG_PCS_MII_CTRL 0x9000 /* PCS MII control reg */ +#define PCS_MII_CTRL_1000_SEL 0x0040 /* reads 1. ignored on + writes */ +#define PCS_MII_CTRL_COLLISION_TEST 0x0080 /* COL signal at the PCS + to MAC interface is + activated regardless + of activity */ +#define PCS_MII_CTRL_DUPLEX 0x0100 /* forced 0x0. PCS + behaviour same for + half and full dplx */ +#define PCS_MII_RESTART_AUTONEG 0x0200 /* self clearing. + restart auto- + negotiation */ +#define PCS_MII_ISOLATE 0x0400 /* read as 0. ignored + on writes */ +#define PCS_MII_POWER_DOWN 0x0800 /* read as 0. ignored + on writes */ +#define PCS_MII_AUTONEG_EN 0x1000 /* default 1. PCS goes + through automatic + link config before it + can be used. when 0, + link can be used + w/out any link config + phase */ +#define PCS_MII_10_100_SEL 0x2000 /* read as 0. ignored on + writes */ +#define PCS_MII_RESET 0x8000 /* reset PCS. self-clears + when done */ + +/* DEFAULT: 0x0108 */ +#define REG_PCS_MII_STATUS 0x9004 /* PCS MII status reg */ +#define PCS_MII_STATUS_EXTEND_CAP 0x0001 /* reads 0 */ +#define PCS_MII_STATUS_JABBER_DETECT 0x0002 /* reads 0 */ +#define PCS_MII_STATUS_LINK_STATUS 0x0004 /* 1 -> link up. + 0 -> link down. 0 is + latched so that 0 is + kept until read. read + 2x to determine if the + link has gone up again */ +#define PCS_MII_STATUS_AUTONEG_ABLE 0x0008 /* reads 1 (able to perform + auto-neg) */ +#define PCS_MII_STATUS_REMOTE_FAULT 0x0010 /* 1 -> remote fault detected + from received link code + word. only valid after + auto-neg completed */ +#define PCS_MII_STATUS_AUTONEG_COMP 0x0020 /* 1 -> auto-negotiation + completed + 0 -> auto-negotiation not + completed */ +#define PCS_MII_STATUS_EXTEND_STATUS 0x0100 /* reads as 1. used as an + indication that this is + a 1000 Base-X PHY. writes + to it are ignored */ + +/* used during auto-negotiation. + * DEFAULT: 0x00E0 + */ +#define REG_PCS_MII_ADVERT 0x9008 /* PCS MII advertisement + reg */ +#define PCS_MII_ADVERT_FD 0x0020 /* advertise full duplex + 1000 Base-X */ +#define PCS_MII_ADVERT_HD 0x0040 /* advertise half-duplex + 1000 Base-X */ +#define PCS_MII_ADVERT_SYM_PAUSE 0x0080 /* advertise PAUSE + symmetric capability */ +#define PCS_MII_ADVERT_ASYM_PAUSE 0x0100 /* advertises PAUSE + asymmetric capability */ +#define PCS_MII_ADVERT_RF_MASK 0x3000 /* remote fault. write bit13 + to optionally indicate to + link partner that chip is + going off-line. bit12 will + get set when signal + detect == FAIL and will + remain set until + successful negotiation */ +#define PCS_MII_ADVERT_ACK 0x4000 /* (ro) */ +#define PCS_MII_ADVERT_NEXT_PAGE 0x8000 /* (ro) forced 0x0 */ + +/* contents updated as a result of autonegotiation. layout and definitions + * identical to PCS_MII_ADVERT + */ +#define REG_PCS_MII_LPA 0x900C /* PCS MII link partner + ability reg */ +#define PCS_MII_LPA_FD PCS_MII_ADVERT_FD +#define PCS_MII_LPA_HD PCS_MII_ADVERT_HD +#define PCS_MII_LPA_SYM_PAUSE PCS_MII_ADVERT_SYM_PAUSE +#define PCS_MII_LPA_ASYM_PAUSE PCS_MII_ADVERT_ASYM_PAUSE +#define PCS_MII_LPA_RF_MASK PCS_MII_ADVERT_RF_MASK +#define PCS_MII_LPA_ACK PCS_MII_ADVERT_ACK +#define PCS_MII_LPA_NEXT_PAGE PCS_MII_ADVERT_NEXT_PAGE + +/* DEFAULT: 0x0 */ +#define REG_PCS_CFG 0x9010 /* PCS config reg */ +#define PCS_CFG_EN 0x01 /* enable PCS. must be + 0 when modifying + PCS_MII_ADVERT */ +#define PCS_CFG_SD_OVERRIDE 0x02 /* sets signal detect to + OK. bit is + non-resettable */ +#define PCS_CFG_SD_ACTIVE_LOW 0x04 /* changes interpretation + of optical signal to make + signal detect okay when + signal is low */ +#define PCS_CFG_JITTER_STUDY_MASK 0x18 /* used to make jitter + measurements. a single + code group is xmitted + regularly. + 0x0 = normal operation + 0x1 = high freq test + pattern, D21.5 + 0x2 = low freq test + pattern, K28.7 + 0x3 = reserved */ +#define PCS_CFG_10MS_TIMER_OVERRIDE 0x20 /* shortens 10-20ms auto- + negotiation timer to + a few cycles for test + purposes */ + +/* used for diagnostic purposes. bits 20-22 autoclear on read */ +#define REG_PCS_STATE_MACHINE 0x9014 /* (ro) PCS state machine + and diagnostic reg */ +#define PCS_SM_TX_STATE_MASK 0x0000000F /* 0 and 1 indicate + xmission of idle. + otherwise, xmission of + a packet */ +#define PCS_SM_RX_STATE_MASK 0x000000F0 /* 0 indicates reception + of idle. otherwise, + reception of packet */ +#define PCS_SM_WORD_SYNC_STATE_MASK 0x00000700 /* 0 indicates loss of + sync */ +#define PCS_SM_SEQ_DETECT_STATE_MASK 0x00001800 /* cycling through 0-3 + indicates reception of + Config codes. cycling + through 0-1 indicates + reception of idles */ +#define PCS_SM_LINK_STATE_MASK 0x0001E000 +#define SM_LINK_STATE_UP 0x00016000 /* link state is up */ + +#define PCS_SM_LOSS_LINK_C 0x00100000 /* loss of link due to + recept of Config + codes */ +#define PCS_SM_LOSS_LINK_SYNC 0x00200000 /* loss of link due to + loss of sync */ +#define PCS_SM_LOSS_SIGNAL_DETECT 0x00400000 /* signal detect goes + from OK to FAIL. bit29 + will also be set if + this is set */ +#define PCS_SM_NO_LINK_BREAKLINK 0x01000000 /* link not up due to + receipt of breaklink + C codes from partner. + C codes w/ 0 content + received triggering + start/restart of + autonegotiation. + should be sent for + no longer than 20ms */ +#define PCS_SM_NO_LINK_SERDES 0x02000000 /* serdes being + initialized. see serdes + state reg */ +#define PCS_SM_NO_LINK_C 0x04000000 /* C codes not stable or + not received */ +#define PCS_SM_NO_LINK_SYNC 0x08000000 /* word sync not + achieved */ +#define PCS_SM_NO_LINK_WAIT_C 0x10000000 /* waiting for C codes + w/ ack bit set */ +#define PCS_SM_NO_LINK_NO_IDLE 0x20000000 /* link partner continues + to send C codes + instead of idle + symbols or pkt data */ + +/* this register indicates interrupt changes in specific PCS MII status bits. + * PCS_INT may be masked at the ISR level. only a single bit is implemented + * for link status change. + */ +#define REG_PCS_INTR_STATUS 0x9018 /* PCS interrupt status */ +#define PCS_INTR_STATUS_LINK_CHANGE 0x04 /* link status has changed + since last read */ + +/* control which network interface is used. no more than one bit should + * be set. + * DEFAULT: none + */ +#define REG_PCS_DATAPATH_MODE 0x9050 /* datapath mode reg */ +#define PCS_DATAPATH_MODE_MII 0x00 /* PCS is not used and + MII/GMII is selected. + selection between MII and + GMII is controlled by + XIF_CFG */ +#define PCS_DATAPATH_MODE_SERDES 0x02 /* PCS is used via the + 10-bit interface */ + +/* input to serdes chip or serialink block */ +#define REG_PCS_SERDES_CTRL 0x9054 /* serdes control reg */ +#define PCS_SERDES_CTRL_LOOPBACK 0x01 /* enable loopback on + serdes interface */ +#define PCS_SERDES_CTRL_SYNCD_EN 0x02 /* enable sync carrier + detection. should be + 0x0 for normal + operation */ +#define PCS_SERDES_CTRL_LOCKREF 0x04 /* frequency-lock RBC[0:1] + to REFCLK when set. + when clear, receiver + clock locks to incoming + serial data */ + +/* multiplex test outputs into the PROM address (PA_3 through PA_0) pins. + * should be 0x0 for normal operations. + * 0b000 normal operation, PROM address[3:0] selected + * 0b001 rxdma req, rxdma ack, rxdma ready, rxdma read + * 0b010 rxmac req, rx ack, rx tag, rx clk shared + * 0b011 txmac req, tx ack, tx tag, tx retry req + * 0b100 tx tp3, tx tp2, tx tp1, tx tp0 + * 0b101 R period RX, R period TX, R period HP, R period BIM + * DEFAULT: 0x0 + */ +#define REG_PCS_SHARED_OUTPUT_SEL 0x9058 /* shared output select */ +#define PCS_SOS_PROM_ADDR_MASK 0x0007 + +/* used for diagnostics. this register indicates progress of the SERDES + * boot up. + * 0b00 undergoing reset + * 0b01 waiting 500us while lockrefn is asserted + * 0b10 waiting for comma detect + * 0b11 receive data is synchronized + * DEFAULT: 0x0 + */ +#define REG_PCS_SERDES_STATE 0x905C /* (ro) serdes state */ +#define PCS_SERDES_STATE_MASK 0x03 + +/* used for diagnostics. indicates number of packets transmitted or received. + * counters rollover w/out generating an interrupt. + * DEFAULT: 0x0 + */ +#define REG_PCS_PACKET_COUNT 0x9060 /* (ro) PCS packet counter */ +#define PCS_PACKET_COUNT_TX 0x000007FF /* pkts xmitted by PCS */ +#define PCS_PACKET_COUNT_RX 0x07FF0000 /* pkts recvd by PCS + whether they + encountered an error + or not */ + +/** LocalBus Devices. the following provides run-time access to the + * Cassini's PROM + ***/ +#define REG_EXPANSION_ROM_RUN_START 0x100000 /* expansion rom run time + access */ +#define REG_EXPANSION_ROM_RUN_END 0x17FFFF + +#define REG_SECOND_LOCALBUS_START 0x180000 /* secondary local bus + device */ +#define REG_SECOND_LOCALBUS_END 0x1FFFFF + +/* entropy device */ +#define REG_ENTROPY_START REG_SECOND_LOCALBUS_START +#define REG_ENTROPY_DATA (REG_ENTROPY_START + 0x00) +#define REG_ENTROPY_STATUS (REG_ENTROPY_START + 0x04) +#define ENTROPY_STATUS_DRDY 0x01 +#define ENTROPY_STATUS_BUSY 0x02 +#define ENTROPY_STATUS_CIPHER 0x04 +#define ENTROPY_STATUS_BYPASS_MASK 0x18 +#define REG_ENTROPY_MODE (REG_ENTROPY_START + 0x05) +#define ENTROPY_MODE_KEY_MASK 0x07 +#define ENTROPY_MODE_ENCRYPT 0x40 +#define REG_ENTROPY_RAND_REG (REG_ENTROPY_START + 0x06) +#define REG_ENTROPY_RESET (REG_ENTROPY_START + 0x07) +#define ENTROPY_RESET_DES_IO 0x01 +#define ENTROPY_RESET_STC_MODE 0x02 +#define ENTROPY_RESET_KEY_CACHE 0x04 +#define ENTROPY_RESET_IV 0x08 +#define REG_ENTROPY_IV (REG_ENTROPY_START + 0x08) +#define REG_ENTROPY_KEY0 (REG_ENTROPY_START + 0x10) +#define REG_ENTROPY_KEYN(x) (REG_ENTROPY_KEY0 + 4*(x)) + +/* phys of interest w/ their special mii registers */ +#define PHY_LUCENT_B0 0x00437421 +#define LUCENT_MII_REG 0x1F + +#define PHY_NS_DP83065 0x20005c78 +#define DP83065_MII_MEM 0x16 +#define DP83065_MII_REGD 0x1D +#define DP83065_MII_REGE 0x1E + +#define PHY_BROADCOM_5411 0x00206071 +#define PHY_BROADCOM_B0 0x00206050 +#define BROADCOM_MII_REG4 0x14 +#define BROADCOM_MII_REG5 0x15 +#define BROADCOM_MII_REG7 0x17 +#define BROADCOM_MII_REG8 0x18 + +#define CAS_MII_ANNPTR 0x07 +#define CAS_MII_ANNPRR 0x08 +#define CAS_MII_1000_CTRL 0x09 +#define CAS_MII_1000_STATUS 0x0A +#define CAS_MII_1000_EXTEND 0x0F + +#define CAS_BMSR_1000_EXTEND 0x0100 /* supports 1000Base-T extended status */ +/* + * if autoneg is disabled, here's the table: + * BMCR_SPEED100 = 100Mbps + * BMCR_SPEED1000 = 1000Mbps + * ~(BMCR_SPEED100 | BMCR_SPEED1000) = 10Mbps + */ +#define CAS_BMCR_SPEED1000 0x0040 /* Select 1000Mbps */ + +#define CAS_ADVERTISE_1000HALF 0x0100 +#define CAS_ADVERTISE_1000FULL 0x0200 +#define CAS_ADVERTISE_PAUSE 0x0400 +#define CAS_ADVERTISE_ASYM_PAUSE 0x0800 + +/* regular lpa register */ +#define CAS_LPA_PAUSE CAS_ADVERTISE_PAUSE +#define CAS_LPA_ASYM_PAUSE CAS_ADVERTISE_ASYM_PAUSE + +/* 1000_STATUS register */ +#define CAS_LPA_1000HALF 0x0400 +#define CAS_LPA_1000FULL 0x0800 + +#define CAS_EXTEND_1000XFULL 0x8000 +#define CAS_EXTEND_1000XHALF 0x4000 +#define CAS_EXTEND_1000TFULL 0x2000 +#define CAS_EXTEND_1000THALF 0x1000 + +/* cassini header parser firmware */ +typedef struct cas_hp_inst { + const char *note; + + u16 mask, val; + + u8 op; + u8 soff, snext; /* if match succeeds, new offset and match */ + u8 foff, fnext; /* if match fails, new offset and match */ + /* output info */ + u8 outop; /* output opcode */ + + u16 outarg; /* output argument */ + u8 outenab; /* output enable: 0 = not, 1 = if match + 2 = if !match, 3 = always */ + u8 outshift; /* barrel shift right, 4 bits */ + u16 outmask; +} cas_hp_inst_t; + +/* comparison */ +#define OP_EQ 0 /* packet == value */ +#define OP_LT 1 /* packet < value */ +#define OP_GT 2 /* packet > value */ +#define OP_NP 3 /* new packet */ + +/* output opcodes */ +#define CL_REG 0 +#define LD_FID 1 +#define LD_SEQ 2 +#define LD_CTL 3 +#define LD_SAP 4 +#define LD_R1 5 +#define LD_L3 6 +#define LD_SUM 7 +#define LD_HDR 8 +#define IM_FID 9 +#define IM_SEQ 10 +#define IM_SAP 11 +#define IM_R1 12 +#define IM_CTL 13 +#define LD_LEN 14 +#define ST_FLG 15 + +/* match setp #s for IP4TCP4 */ +#define S1_PCKT 0 +#define S1_VLAN 1 +#define S1_CFI 2 +#define S1_8023 3 +#define S1_LLC 4 +#define S1_LLCc 5 +#define S1_IPV4 6 +#define S1_IPV4c 7 +#define S1_IPV4F 8 +#define S1_TCP44 9 +#define S1_IPV6 10 +#define S1_IPV6L 11 +#define S1_IPV6c 12 +#define S1_TCP64 13 +#define S1_TCPSQ 14 +#define S1_TCPFG 15 +#define S1_TCPHL 16 +#define S1_TCPHc 17 +#define S1_CLNP 18 +#define S1_CLNP2 19 +#define S1_DROP 20 +#define S2_HTTP 21 +#define S1_ESP4 22 +#define S1_AH4 23 +#define S1_ESP6 24 +#define S1_AH6 25 + +#define CAS_PROG_IP46TCP4_PREAMBLE \ +{ "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, \ + CL_REG, 0x3ff, 1, 0x0, 0x0000}, \ +{ "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, \ + IM_CTL, 0x00a, 3, 0x0, 0xffff}, \ +{ "CFI?", 0x1000, 0x1000, OP_EQ, 0, S1_DROP, 1, S1_8023, \ + CL_REG, 0x000, 0, 0x0, 0x0000}, \ +{ "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, \ + CL_REG, 0x000, 0, 0x0, 0x0000}, \ +{ "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, \ + CL_REG, 0x000, 0, 0x0, 0x0000}, \ +{ "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP, \ + CL_REG, 0x000, 0, 0x0, 0x0000}, \ +{ "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, \ + LD_SAP, 0x100, 3, 0x0, 0xffff}, \ +{ "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, \ + LD_SUM, 0x00a, 1, 0x0, 0x0000}, \ +{ "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, \ + LD_LEN, 0x03e, 1, 0x0, 0xffff}, \ +{ "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_CLNP, \ + LD_FID, 0x182, 1, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ \ +{ "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S1_IPV6L, 0, S1_CLNP, \ + LD_SUM, 0x015, 1, 0x0, 0x0000}, \ +{ "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP, \ + IM_R1, 0x128, 1, 0x0, 0xffff}, \ +{ "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, \ + LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ \ +{ "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_CLNP, \ + LD_LEN, 0x03f, 1, 0x0, 0xffff} + +#ifdef USE_HP_IP46TCP4 +static cas_hp_inst_t cas_prog_ip46tcp4tab[] = { + CAS_PROG_IP46TCP4_PREAMBLE, + { "TCP seq", /* DADDR should point to dest port */ + 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, + 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ + { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, + S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, + S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, + { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, + S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, + { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, + IM_CTL, 0x001, 3, 0x0, 0x0001}, + { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x000, 0, 0x0, 0x0000}, + { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x080, 3, 0x0, 0xffff}, + { NULL }, +}; +#ifdef HP_IP46TCP4_DEFAULT +#define CAS_HP_FIRMWARE cas_prog_ip46tcp4tab +#endif +#endif + +/* + * Alternate table load which excludes HTTP server traffic from reassembly. + * It is substantially similar to the basic table, with one extra state + * and a few extra compares. */ +#ifdef USE_HP_IP46TCP4NOHTTP +static cas_hp_inst_t cas_prog_ip46tcp4nohttptab[] = { + CAS_PROG_IP46TCP4_PREAMBLE, + { "TCP seq", /* DADDR should point to dest port */ + 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ, + 0x081, 3, 0x0, 0xffff} , /* Load TCP seq # */ + { "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0, + S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f, }, /* Load TCP flags */ + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, + LD_R1, 0x205, 3, 0xB, 0xf000}, + { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + LD_HDR, 0x0ff, 3, 0x0, 0xffff}, + { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, + IM_CTL, 0x001, 3, 0x0, 0x0001}, + { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + CL_REG, 0x002, 3, 0x0, 0x0000}, + { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x080, 3, 0x0, 0xffff}, + { "No HTTP", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x044, 3, 0x0, 0xffff}, + { NULL }, +}; +#ifdef HP_IP46TCP4NOHTTP_DEFAULT +#define CAS_HP_FIRMWARE cas_prog_ip46tcp4nohttptab +#endif +#endif + +/* match step #s for IP4FRAG */ +#define S3_IPV6c 11 +#define S3_TCP64 12 +#define S3_TCPSQ 13 +#define S3_TCPFG 14 +#define S3_TCPHL 15 +#define S3_TCPHc 16 +#define S3_FRAG 17 +#define S3_FOFF 18 +#define S3_CLNP 19 + +#ifdef USE_HP_IP4FRAG +static cas_hp_inst_t cas_prog_ip4fragtab[] = { + { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, + CL_REG, 0x3ff, 1, 0x0, 0x0000}, + { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, + IM_CTL, 0x00a, 3, 0x0, 0xffff}, + { "CFI?", 0x1000, 0x1000, OP_EQ, 0, S3_CLNP, 1, S1_8023, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S3_CLNP, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "LLCc?",0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S3_CLNP, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, + LD_SAP, 0x100, 3, 0x0, 0xffff}, + { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S3_CLNP, + LD_SUM, 0x00a, 1, 0x0, 0x0000}, + { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S3_FRAG, + LD_LEN, 0x03e, 3, 0x0, 0xffff}, + { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S3_TCPSQ, 0, S3_CLNP, + LD_FID, 0x182, 3, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ + { "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S3_IPV6c, 0, S3_CLNP, + LD_SUM, 0x015, 1, 0x0, 0x0000}, + { "IPV6 cont?", 0xf000, 0x6000, OP_EQ, 3, S3_TCP64, 0, S3_CLNP, + LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ + { "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S3_TCPSQ, 0, S3_CLNP, + LD_LEN, 0x03f, 1, 0x0, 0xffff}, + { "TCP seq", /* DADDR should point to dest port */ + 0x0000, 0x0000, OP_EQ, 0, S3_TCPFG, 4, S3_TCPFG, LD_SEQ, + 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ + { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHL, 0, + S3_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHc, 0, S3_TCPHc, + LD_R1, 0x205, 3, 0xB, 0xf000}, + { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + LD_HDR, 0x0ff, 3, 0x0, 0xffff}, + { "IP4 Fragment", 0x0000, 0x0000, OP_EQ, 0, S3_FOFF, 0, S3_FOFF, + LD_FID, 0x103, 3, 0x0, 0xffff}, /* FID IP4 src+dst */ + { "IP4 frag offset", 0x0000, 0x0000, OP_EQ, 0, S3_FOFF, 0, S3_FOFF, + LD_SEQ, 0x040, 1, 0xD, 0xfff8}, + { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x001, 3, 0x0, 0x0001}, + { NULL }, +}; +#ifdef HP_IP4FRAG_DEFAULT +#define CAS_HP_FIRMWARE cas_prog_ip4fragtab +#endif +#endif + +/* + * Alternate table which does batching without reassembly + */ +#ifdef USE_HP_IP46TCP4BATCH +static cas_hp_inst_t cas_prog_ip46tcp4batchtab[] = { + CAS_PROG_IP46TCP4_PREAMBLE, + { "TCP seq", /* DADDR should point to dest port */ + 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 0, S1_TCPFG, LD_SEQ, + 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ + { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, + S1_TCPHL, ST_FLG, 0x000, 3, 0x0, 0x0000}, /* Load TCP flags */ + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, + S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, + { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, + S1_PCKT, IM_CTL, 0x040, 3, 0x0, 0xffff}, /* set batch bit */ + { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x001, 3, 0x0, 0x0001}, + { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, + S1_PCKT, IM_CTL, 0x080, 3, 0x0, 0xffff}, + { NULL }, +}; +#ifdef HP_IP46TCP4BATCH_DEFAULT +#define CAS_HP_FIRMWARE cas_prog_ip46tcp4batchtab +#endif +#endif + +/* Workaround for Cassini rev2 descriptor corruption problem. + * Does batching without reassembly, and sets the SAP to a known + * data pattern for all packets. + */ +#ifdef USE_HP_WORKAROUND +static cas_hp_inst_t cas_prog_workaroundtab[] = { + { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, + S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000} , + { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, + IM_CTL, 0x04a, 3, 0x0, 0xffff}, + { "CFI?", 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, + IM_SAP, 0x6AE, 3, 0x0, 0xffff}, + { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, + LD_SUM, 0x00a, 1, 0x0, 0x0000}, + { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, + LD_LEN, 0x03e, 1, 0x0, 0xffff}, + { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_CLNP, + LD_FID, 0x182, 3, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ + { "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S1_IPV6L, 0, S1_CLNP, + LD_SUM, 0x015, 1, 0x0, 0x0000}, + { "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP, + IM_R1, 0x128, 1, 0x0, 0xffff}, + { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, + LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ + { "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_CLNP, + LD_LEN, 0x03f, 1, 0x0, 0xffff}, + { "TCP seq", /* DADDR should point to dest port */ + 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, + 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ + { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, + S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, + LD_R1, 0x205, 3, 0xB, 0xf000}, + { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, + S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, + { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, + IM_SAP, 0x6AE, 3, 0x0, 0xffff} , + { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x001, 3, 0x0, 0x0001}, + { NULL }, +}; +#ifdef HP_WORKAROUND_DEFAULT +#define CAS_HP_FIRMWARE cas_prog_workaroundtab +#endif +#endif + +#ifdef USE_HP_ENCRYPT +static cas_hp_inst_t cas_prog_encryptiontab[] = { + { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, + S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000}, + { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, + IM_CTL, 0x00a, 3, 0x0, 0xffff}, +#if 0 +//"CFI?", /* 02 FIND CFI and If FIND go to S1_DROP */ +//0x1000, 0x1000, OP_EQ, 0, S1_DROP, 1, S1_8023, CL_REG, 0x000, 0, 0x0, 0x00 + 00, +#endif + { "CFI?", /* FIND CFI and If FIND go to CleanUP1 (ignore and send to host) */ + 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP, + CL_REG, 0x000, 0, 0x0, 0x0000}, + { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, + LD_SAP, 0x100, 3, 0x0, 0xffff}, + { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, + LD_SUM, 0x00a, 1, 0x0, 0x0000}, + { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, + LD_LEN, 0x03e, 1, 0x0, 0xffff}, + { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_ESP4, + LD_FID, 0x182, 1, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ + { "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S1_IPV6L, 0, S1_CLNP, + LD_SUM, 0x015, 1, 0x0, 0x0000}, + { "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP, + IM_R1, 0x128, 1, 0x0, 0xffff}, + { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, + LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ + { "TCP64?", +#if 0 +//@@@0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_ESP6, LD_LEN, 0x03f, 1, 0x0, 0xffff, +#endif + 0xff00, 0x0600, OP_EQ, 12, S1_TCPSQ, 0, S1_ESP6, LD_LEN, + 0x03f, 1, 0x0, 0xffff}, + { "TCP seq", /* 14:DADDR should point to dest port */ + 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ, + 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ + { "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0, + S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f}, /* Load TCP flags */ + { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, + LD_R1, 0x205, 3, 0xB, 0xf000} , + { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, + S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, + { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, + IM_CTL, 0x001, 3, 0x0, 0x0001}, + { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + CL_REG, 0x002, 3, 0x0, 0x0000}, + { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x080, 3, 0x0, 0xffff}, + { "No HTTP", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, + IM_CTL, 0x044, 3, 0x0, 0xffff}, + { "IPV4 ESP encrypted?", /* S1_ESP4 */ + 0x00ff, 0x0032, OP_EQ, 0, S1_CLNP2, 0, S1_AH4, IM_CTL, + 0x021, 1, 0x0, 0xffff}, + { "IPV4 AH encrypted?", /* S1_AH4 */ + 0x00ff, 0x0033, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP, IM_CTL, + 0x021, 1, 0x0, 0xffff}, + { "IPV6 ESP encrypted?", /* S1_ESP6 */ +#if 0 +//@@@0x00ff, 0x0032, OP_EQ, 0, S1_CLNP2, 0, S1_AH6, IM_CTL, 0x021, 1, 0x0, 0xffff, +#endif + 0xff00, 0x3200, OP_EQ, 0, S1_CLNP2, 0, S1_AH6, IM_CTL, + 0x021, 1, 0x0, 0xffff}, + { "IPV6 AH encrypted?", /* S1_AH6 */ +#if 0 +//@@@0x00ff, 0x0033, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP, IM_CTL, 0x021, 1, 0x0, 0xffff, +#endif + 0xff00, 0x3300, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP, IM_CTL, + 0x021, 1, 0x0, 0xffff}, + { NULL }, +}; +#ifdef HP_ENCRYPT_DEFAULT +#define CAS_HP_FIRMWARE cas_prog_encryptiontab +#endif +#endif + +static cas_hp_inst_t cas_prog_null[] = { {NULL} }; +#ifdef HP_NULL_DEFAULT +#define CAS_HP_FIRMWARE cas_prog_null +#endif + +/* firmware patch for NS_DP83065 */ +typedef struct cas_saturn_patch { + u16 addr; + u16 val; +} cas_saturn_patch_t; + +#if 1 +cas_saturn_patch_t cas_saturn_patch[] = { +{0x8200, 0x007e}, {0x8201, 0x0082}, {0x8202, 0x0009}, +{0x8203, 0x0000}, {0x8204, 0x0000}, {0x8205, 0x0000}, +{0x8206, 0x0000}, {0x8207, 0x0000}, {0x8208, 0x0000}, +{0x8209, 0x008e}, {0x820a, 0x008e}, {0x820b, 0x00ff}, +{0x820c, 0x00ce}, {0x820d, 0x0082}, {0x820e, 0x0025}, +{0x820f, 0x00ff}, {0x8210, 0x0001}, {0x8211, 0x000f}, +{0x8212, 0x00ce}, {0x8213, 0x0084}, {0x8214, 0x0026}, +{0x8215, 0x00ff}, {0x8216, 0x0001}, {0x8217, 0x0011}, +{0x8218, 0x00ce}, {0x8219, 0x0085}, {0x821a, 0x003d}, +{0x821b, 0x00df}, {0x821c, 0x00e5}, {0x821d, 0x0086}, +{0x821e, 0x0039}, {0x821f, 0x00b7}, {0x8220, 0x008f}, +{0x8221, 0x00f8}, {0x8222, 0x007e}, {0x8223, 0x00c3}, +{0x8224, 0x00c2}, {0x8225, 0x0096}, {0x8226, 0x0047}, +{0x8227, 0x0084}, {0x8228, 0x00f3}, {0x8229, 0x008a}, +{0x822a, 0x0000}, {0x822b, 0x0097}, {0x822c, 0x0047}, +{0x822d, 0x00ce}, {0x822e, 0x0082}, {0x822f, 0x0033}, +{0x8230, 0x00ff}, {0x8231, 0x0001}, {0x8232, 0x000f}, +{0x8233, 0x0096}, {0x8234, 0x0046}, {0x8235, 0x0084}, +{0x8236, 0x000c}, {0x8237, 0x0081}, {0x8238, 0x0004}, +{0x8239, 0x0027}, {0x823a, 0x000b}, {0x823b, 0x0096}, +{0x823c, 0x0046}, {0x823d, 0x0084}, {0x823e, 0x000c}, +{0x823f, 0x0081}, {0x8240, 0x0008}, {0x8241, 0x0027}, +{0x8242, 0x0057}, {0x8243, 0x007e}, {0x8244, 0x0084}, +{0x8245, 0x0025}, {0x8246, 0x0096}, {0x8247, 0x0047}, +{0x8248, 0x0084}, {0x8249, 0x00f3}, {0x824a, 0x008a}, +{0x824b, 0x0004}, {0x824c, 0x0097}, {0x824d, 0x0047}, +{0x824e, 0x00ce}, {0x824f, 0x0082}, {0x8250, 0x0054}, +{0x8251, 0x00ff}, {0x8252, 0x0001}, {0x8253, 0x000f}, +{0x8254, 0x0096}, {0x8255, 0x0046}, {0x8256, 0x0084}, +{0x8257, 0x000c}, {0x8258, 0x0081}, {0x8259, 0x0004}, +{0x825a, 0x0026}, {0x825b, 0x0038}, {0x825c, 0x00b6}, +{0x825d, 0x0012}, {0x825e, 0x0020}, {0x825f, 0x0084}, +{0x8260, 0x0020}, {0x8261, 0x0026}, {0x8262, 0x0003}, +{0x8263, 0x007e}, {0x8264, 0x0084}, {0x8265, 0x0025}, +{0x8266, 0x0096}, {0x8267, 0x007b}, {0x8268, 0x00d6}, +{0x8269, 0x007c}, {0x826a, 0x00fe}, {0x826b, 0x008f}, +{0x826c, 0x0056}, {0x826d, 0x00bd}, {0x826e, 0x00f7}, +{0x826f, 0x00b6}, {0x8270, 0x00fe}, {0x8271, 0x008f}, +{0x8272, 0x004e}, {0x8273, 0x00bd}, {0x8274, 0x00ec}, +{0x8275, 0x008e}, {0x8276, 0x00bd}, {0x8277, 0x00fa}, +{0x8278, 0x00f7}, {0x8279, 0x00bd}, {0x827a, 0x00f7}, +{0x827b, 0x0028}, {0x827c, 0x00ce}, {0x827d, 0x0082}, +{0x827e, 0x0082}, {0x827f, 0x00ff}, {0x8280, 0x0001}, +{0x8281, 0x000f}, {0x8282, 0x0096}, {0x8283, 0x0046}, +{0x8284, 0x0084}, {0x8285, 0x000c}, {0x8286, 0x0081}, +{0x8287, 0x0004}, {0x8288, 0x0026}, {0x8289, 0x000a}, +{0x828a, 0x00b6}, {0x828b, 0x0012}, {0x828c, 0x0020}, +{0x828d, 0x0084}, {0x828e, 0x0020}, {0x828f, 0x0027}, +{0x8290, 0x00b5}, {0x8291, 0x007e}, {0x8292, 0x0084}, +{0x8293, 0x0025}, {0x8294, 0x00bd}, {0x8295, 0x00f7}, +{0x8296, 0x001f}, {0x8297, 0x007e}, {0x8298, 0x0084}, +{0x8299, 0x001f}, {0x829a, 0x0096}, {0x829b, 0x0047}, +{0x829c, 0x0084}, {0x829d, 0x00f3}, {0x829e, 0x008a}, +{0x829f, 0x0008}, {0x82a0, 0x0097}, {0x82a1, 0x0047}, +{0x82a2, 0x00de}, {0x82a3, 0x00e1}, {0x82a4, 0x00ad}, +{0x82a5, 0x0000}, {0x82a6, 0x00ce}, {0x82a7, 0x0082}, +{0x82a8, 0x00af}, {0x82a9, 0x00ff}, {0x82aa, 0x0001}, +{0x82ab, 0x000f}, {0x82ac, 0x007e}, {0x82ad, 0x0084}, +{0x82ae, 0x0025}, {0x82af, 0x0096}, {0x82b0, 0x0041}, +{0x82b1, 0x0085}, {0x82b2, 0x0010}, {0x82b3, 0x0026}, +{0x82b4, 0x0006}, {0x82b5, 0x0096}, {0x82b6, 0x0023}, +{0x82b7, 0x0085}, {0x82b8, 0x0040}, {0x82b9, 0x0027}, +{0x82ba, 0x0006}, {0x82bb, 0x00bd}, {0x82bc, 0x00ed}, +{0x82bd, 0x0000}, {0x82be, 0x007e}, {0x82bf, 0x0083}, +{0x82c0, 0x00a2}, {0x82c1, 0x00de}, {0x82c2, 0x0042}, +{0x82c3, 0x00bd}, {0x82c4, 0x00eb}, {0x82c5, 0x008e}, +{0x82c6, 0x0096}, {0x82c7, 0x0024}, {0x82c8, 0x0084}, +{0x82c9, 0x0008}, {0x82ca, 0x0027}, {0x82cb, 0x0003}, +{0x82cc, 0x007e}, {0x82cd, 0x0083}, {0x82ce, 0x00df}, +{0x82cf, 0x0096}, {0x82d0, 0x007b}, {0x82d1, 0x00d6}, +{0x82d2, 0x007c}, {0x82d3, 0x00fe}, {0x82d4, 0x008f}, +{0x82d5, 0x0056}, {0x82d6, 0x00bd}, {0x82d7, 0x00f7}, +{0x82d8, 0x00b6}, {0x82d9, 0x00fe}, {0x82da, 0x008f}, +{0x82db, 0x0050}, {0x82dc, 0x00bd}, {0x82dd, 0x00ec}, +{0x82de, 0x008e}, {0x82df, 0x00bd}, {0x82e0, 0x00fa}, +{0x82e1, 0x00f7}, {0x82e2, 0x0086}, {0x82e3, 0x0011}, +{0x82e4, 0x00c6}, {0x82e5, 0x0049}, {0x82e6, 0x00bd}, +{0x82e7, 0x00e4}, {0x82e8, 0x0012}, {0x82e9, 0x00ce}, +{0x82ea, 0x0082}, {0x82eb, 0x00ef}, {0x82ec, 0x00ff}, +{0x82ed, 0x0001}, {0x82ee, 0x000f}, {0x82ef, 0x0096}, +{0x82f0, 0x0046}, {0x82f1, 0x0084}, {0x82f2, 0x000c}, +{0x82f3, 0x0081}, {0x82f4, 0x0000}, {0x82f5, 0x0027}, +{0x82f6, 0x0017}, {0x82f7, 0x00c6}, {0x82f8, 0x0049}, +{0x82f9, 0x00bd}, {0x82fa, 0x00e4}, {0x82fb, 0x0091}, +{0x82fc, 0x0024}, {0x82fd, 0x000d}, {0x82fe, 0x00b6}, +{0x82ff, 0x0012}, {0x8300, 0x0020}, {0x8301, 0x0085}, +{0x8302, 0x0020}, {0x8303, 0x0026}, {0x8304, 0x000c}, +{0x8305, 0x00ce}, {0x8306, 0x0082}, {0x8307, 0x00c1}, +{0x8308, 0x00ff}, {0x8309, 0x0001}, {0x830a, 0x000f}, +{0x830b, 0x007e}, {0x830c, 0x0084}, {0x830d, 0x0025}, +{0x830e, 0x007e}, {0x830f, 0x0084}, {0x8310, 0x0016}, +{0x8311, 0x00fe}, {0x8312, 0x008f}, {0x8313, 0x0052}, +{0x8314, 0x00bd}, {0x8315, 0x00ec}, {0x8316, 0x008e}, +{0x8317, 0x00bd}, {0x8318, 0x00fa}, {0x8319, 0x00f7}, +{0x831a, 0x0086}, {0x831b, 0x006a}, {0x831c, 0x00c6}, +{0x831d, 0x0049}, {0x831e, 0x00bd}, {0x831f, 0x00e4}, +{0x8320, 0x0012}, {0x8321, 0x00ce}, {0x8322, 0x0083}, +{0x8323, 0x0027}, {0x8324, 0x00ff}, {0x8325, 0x0001}, +{0x8326, 0x000f}, {0x8327, 0x0096}, {0x8328, 0x0046}, +{0x8329, 0x0084}, {0x832a, 0x000c}, {0x832b, 0x0081}, +{0x832c, 0x0000}, {0x832d, 0x0027}, {0x832e, 0x000a}, +{0x832f, 0x00c6}, {0x8330, 0x0049}, {0x8331, 0x00bd}, +{0x8332, 0x00e4}, {0x8333, 0x0091}, {0x8334, 0x0025}, +{0x8335, 0x0006}, {0x8336, 0x007e}, {0x8337, 0x0084}, +{0x8338, 0x0025}, {0x8339, 0x007e}, {0x833a, 0x0084}, +{0x833b, 0x0016}, {0x833c, 0x00b6}, {0x833d, 0x0018}, +{0x833e, 0x0070}, {0x833f, 0x00bb}, {0x8340, 0x0019}, +{0x8341, 0x0070}, {0x8342, 0x002a}, {0x8343, 0x0004}, +{0x8344, 0x0081}, {0x8345, 0x00af}, {0x8346, 0x002e}, +{0x8347, 0x0019}, {0x8348, 0x0096}, {0x8349, 0x007b}, +{0x834a, 0x00f6}, {0x834b, 0x0020}, {0x834c, 0x0007}, +{0x834d, 0x00fa}, {0x834e, 0x0020}, {0x834f, 0x0027}, +{0x8350, 0x00c4}, {0x8351, 0x0038}, {0x8352, 0x0081}, +{0x8353, 0x0038}, {0x8354, 0x0027}, {0x8355, 0x000b}, +{0x8356, 0x00f6}, {0x8357, 0x0020}, {0x8358, 0x0007}, +{0x8359, 0x00fa}, {0x835a, 0x0020}, {0x835b, 0x0027}, +{0x835c, 0x00cb}, {0x835d, 0x0008}, {0x835e, 0x007e}, +{0x835f, 0x0082}, {0x8360, 0x00d3}, {0x8361, 0x00bd}, +{0x8362, 0x00f7}, {0x8363, 0x0066}, {0x8364, 0x0086}, +{0x8365, 0x0074}, {0x8366, 0x00c6}, {0x8367, 0x0049}, +{0x8368, 0x00bd}, {0x8369, 0x00e4}, {0x836a, 0x0012}, +{0x836b, 0x00ce}, {0x836c, 0x0083}, {0x836d, 0x0071}, +{0x836e, 0x00ff}, {0x836f, 0x0001}, {0x8370, 0x000f}, +{0x8371, 0x0096}, {0x8372, 0x0046}, {0x8373, 0x0084}, +{0x8374, 0x000c}, {0x8375, 0x0081}, {0x8376, 0x0008}, +{0x8377, 0x0026}, {0x8378, 0x000a}, {0x8379, 0x00c6}, +{0x837a, 0x0049}, {0x837b, 0x00bd}, {0x837c, 0x00e4}, +{0x837d, 0x0091}, {0x837e, 0x0025}, {0x837f, 0x0006}, +{0x8380, 0x007e}, {0x8381, 0x0084}, {0x8382, 0x0025}, +{0x8383, 0x007e}, {0x8384, 0x0084}, {0x8385, 0x0016}, +{0x8386, 0x00bd}, {0x8387, 0x00f7}, {0x8388, 0x003e}, +{0x8389, 0x0026}, {0x838a, 0x000e}, {0x838b, 0x00bd}, +{0x838c, 0x00e5}, {0x838d, 0x0009}, {0x838e, 0x0026}, +{0x838f, 0x0006}, {0x8390, 0x00ce}, {0x8391, 0x0082}, +{0x8392, 0x00c1}, {0x8393, 0x00ff}, {0x8394, 0x0001}, +{0x8395, 0x000f}, {0x8396, 0x007e}, {0x8397, 0x0084}, +{0x8398, 0x0025}, {0x8399, 0x00fe}, {0x839a, 0x008f}, +{0x839b, 0x0054}, {0x839c, 0x00bd}, {0x839d, 0x00ec}, +{0x839e, 0x008e}, {0x839f, 0x00bd}, {0x83a0, 0x00fa}, +{0x83a1, 0x00f7}, {0x83a2, 0x00bd}, {0x83a3, 0x00f7}, +{0x83a4, 0x0033}, {0x83a5, 0x0086}, {0x83a6, 0x000f}, +{0x83a7, 0x00c6}, {0x83a8, 0x0051}, {0x83a9, 0x00bd}, +{0x83aa, 0x00e4}, {0x83ab, 0x0012}, {0x83ac, 0x00ce}, +{0x83ad, 0x0083}, {0x83ae, 0x00b2}, {0x83af, 0x00ff}, +{0x83b0, 0x0001}, {0x83b1, 0x000f}, {0x83b2, 0x0096}, +{0x83b3, 0x0046}, {0x83b4, 0x0084}, {0x83b5, 0x000c}, +{0x83b6, 0x0081}, {0x83b7, 0x0008}, {0x83b8, 0x0026}, +{0x83b9, 0x005c}, {0x83ba, 0x00b6}, {0x83bb, 0x0012}, +{0x83bc, 0x0020}, {0x83bd, 0x0084}, {0x83be, 0x003f}, +{0x83bf, 0x0081}, {0x83c0, 0x003a}, {0x83c1, 0x0027}, +{0x83c2, 0x001c}, {0x83c3, 0x0096}, {0x83c4, 0x0023}, +{0x83c5, 0x0085}, {0x83c6, 0x0040}, {0x83c7, 0x0027}, +{0x83c8, 0x0003}, {0x83c9, 0x007e}, {0x83ca, 0x0084}, +{0x83cb, 0x0025}, {0x83cc, 0x00c6}, {0x83cd, 0x0051}, +{0x83ce, 0x00bd}, {0x83cf, 0x00e4}, {0x83d0, 0x0091}, +{0x83d1, 0x0025}, {0x83d2, 0x0003}, {0x83d3, 0x007e}, +{0x83d4, 0x0084}, {0x83d5, 0x0025}, {0x83d6, 0x00ce}, +{0x83d7, 0x0082}, {0x83d8, 0x00c1}, {0x83d9, 0x00ff}, +{0x83da, 0x0001}, {0x83db, 0x000f}, {0x83dc, 0x007e}, +{0x83dd, 0x0084}, {0x83de, 0x0025}, {0x83df, 0x00bd}, +{0x83e0, 0x00f8}, {0x83e1, 0x0037}, {0x83e2, 0x007c}, +{0x83e3, 0x0000}, {0x83e4, 0x007a}, {0x83e5, 0x00ce}, +{0x83e6, 0x0083}, {0x83e7, 0x00ee}, {0x83e8, 0x00ff}, +{0x83e9, 0x0001}, {0x83ea, 0x000f}, {0x83eb, 0x007e}, +{0x83ec, 0x0084}, {0x83ed, 0x0025}, {0x83ee, 0x0096}, +{0x83ef, 0x0046}, {0x83f0, 0x0084}, {0x83f1, 0x000c}, +{0x83f2, 0x0081}, {0x83f3, 0x0008}, {0x83f4, 0x0026}, +{0x83f5, 0x0020}, {0x83f6, 0x0096}, {0x83f7, 0x0024}, +{0x83f8, 0x0084}, {0x83f9, 0x0008}, {0x83fa, 0x0026}, +{0x83fb, 0x0029}, {0x83fc, 0x00b6}, {0x83fd, 0x0018}, +{0x83fe, 0x0082}, {0x83ff, 0x00bb}, {0x8400, 0x0019}, +{0x8401, 0x0082}, {0x8402, 0x00b1}, {0x8403, 0x0001}, +{0x8404, 0x003b}, {0x8405, 0x0022}, {0x8406, 0x0009}, +{0x8407, 0x00b6}, {0x8408, 0x0012}, {0x8409, 0x0020}, +{0x840a, 0x0084}, {0x840b, 0x0037}, {0x840c, 0x0081}, +{0x840d, 0x0032}, {0x840e, 0x0027}, {0x840f, 0x0015}, +{0x8410, 0x00bd}, {0x8411, 0x00f8}, {0x8412, 0x0044}, +{0x8413, 0x007e}, {0x8414, 0x0082}, {0x8415, 0x00c1}, +{0x8416, 0x00bd}, {0x8417, 0x00f7}, {0x8418, 0x001f}, +{0x8419, 0x00bd}, {0x841a, 0x00f8}, {0x841b, 0x0044}, +{0x841c, 0x00bd}, {0x841d, 0x00fc}, {0x841e, 0x0029}, +{0x841f, 0x00ce}, {0x8420, 0x0082}, {0x8421, 0x0025}, +{0x8422, 0x00ff}, {0x8423, 0x0001}, {0x8424, 0x000f}, +{0x8425, 0x0039}, {0x8426, 0x0096}, {0x8427, 0x0047}, +{0x8428, 0x0084}, {0x8429, 0x00fc}, {0x842a, 0x008a}, +{0x842b, 0x0000}, {0x842c, 0x0097}, {0x842d, 0x0047}, +{0x842e, 0x00ce}, {0x842f, 0x0084}, {0x8430, 0x0034}, +{0x8431, 0x00ff}, {0x8432, 0x0001}, {0x8433, 0x0011}, +{0x8434, 0x0096}, {0x8435, 0x0046}, {0x8436, 0x0084}, +{0x8437, 0x0003}, {0x8438, 0x0081}, {0x8439, 0x0002}, +{0x843a, 0x0027}, {0x843b, 0x0003}, {0x843c, 0x007e}, +{0x843d, 0x0085}, {0x843e, 0x001e}, {0x843f, 0x0096}, +{0x8440, 0x0047}, {0x8441, 0x0084}, {0x8442, 0x00fc}, +{0x8443, 0x008a}, {0x8444, 0x0002}, {0x8445, 0x0097}, +{0x8446, 0x0047}, {0x8447, 0x00de}, {0x8448, 0x00e1}, +{0x8449, 0x00ad}, {0x844a, 0x0000}, {0x844b, 0x0086}, +{0x844c, 0x0001}, {0x844d, 0x00b7}, {0x844e, 0x0012}, +{0x844f, 0x0051}, {0x8450, 0x00bd}, {0x8451, 0x00f7}, +{0x8452, 0x0014}, {0x8453, 0x00b6}, {0x8454, 0x0010}, +{0x8455, 0x0031}, {0x8456, 0x0084}, {0x8457, 0x00fd}, +{0x8458, 0x00b7}, {0x8459, 0x0010}, {0x845a, 0x0031}, +{0x845b, 0x00bd}, {0x845c, 0x00f8}, {0x845d, 0x001e}, +{0x845e, 0x0096}, {0x845f, 0x0081}, {0x8460, 0x00d6}, +{0x8461, 0x0082}, {0x8462, 0x00fe}, {0x8463, 0x008f}, +{0x8464, 0x005a}, {0x8465, 0x00bd}, {0x8466, 0x00f7}, +{0x8467, 0x00b6}, {0x8468, 0x00fe}, {0x8469, 0x008f}, +{0x846a, 0x005c}, {0x846b, 0x00bd}, {0x846c, 0x00ec}, +{0x846d, 0x008e}, {0x846e, 0x00bd}, {0x846f, 0x00fa}, +{0x8470, 0x00f7}, {0x8471, 0x0086}, {0x8472, 0x0008}, +{0x8473, 0x00d6}, {0x8474, 0x0000}, {0x8475, 0x00c5}, +{0x8476, 0x0010}, {0x8477, 0x0026}, {0x8478, 0x0002}, +{0x8479, 0x008b}, {0x847a, 0x0020}, {0x847b, 0x00c6}, +{0x847c, 0x0051}, {0x847d, 0x00bd}, {0x847e, 0x00e4}, +{0x847f, 0x0012}, {0x8480, 0x00ce}, {0x8481, 0x0084}, +{0x8482, 0x0086}, {0x8483, 0x00ff}, {0x8484, 0x0001}, +{0x8485, 0x0011}, {0x8486, 0x0096}, {0x8487, 0x0046}, +{0x8488, 0x0084}, {0x8489, 0x0003}, {0x848a, 0x0081}, +{0x848b, 0x0002}, {0x848c, 0x0027}, {0x848d, 0x0003}, +{0x848e, 0x007e}, {0x848f, 0x0085}, {0x8490, 0x000f}, +{0x8491, 0x00c6}, {0x8492, 0x0051}, {0x8493, 0x00bd}, +{0x8494, 0x00e4}, {0x8495, 0x0091}, {0x8496, 0x0025}, +{0x8497, 0x0003}, {0x8498, 0x007e}, {0x8499, 0x0085}, +{0x849a, 0x001e}, {0x849b, 0x0096}, {0x849c, 0x0044}, +{0x849d, 0x0085}, {0x849e, 0x0010}, {0x849f, 0x0026}, +{0x84a0, 0x000a}, {0x84a1, 0x00b6}, {0x84a2, 0x0012}, +{0x84a3, 0x0050}, {0x84a4, 0x00ba}, {0x84a5, 0x0001}, +{0x84a6, 0x003c}, {0x84a7, 0x0085}, {0x84a8, 0x0010}, +{0x84a9, 0x0027}, {0x84aa, 0x00a8}, {0x84ab, 0x00bd}, +{0x84ac, 0x00f7}, {0x84ad, 0x0066}, {0x84ae, 0x00ce}, +{0x84af, 0x0084}, {0x84b0, 0x00b7}, {0x84b1, 0x00ff}, +{0x84b2, 0x0001}, {0x84b3, 0x0011}, {0x84b4, 0x007e}, +{0x84b5, 0x0085}, {0x84b6, 0x001e}, {0x84b7, 0x0096}, +{0x84b8, 0x0046}, {0x84b9, 0x0084}, {0x84ba, 0x0003}, +{0x84bb, 0x0081}, {0x84bc, 0x0002}, {0x84bd, 0x0026}, +{0x84be, 0x0050}, {0x84bf, 0x00b6}, {0x84c0, 0x0012}, +{0x84c1, 0x0030}, {0x84c2, 0x0084}, {0x84c3, 0x0003}, +{0x84c4, 0x0081}, {0x84c5, 0x0001}, {0x84c6, 0x0027}, +{0x84c7, 0x0003}, {0x84c8, 0x007e}, {0x84c9, 0x0085}, +{0x84ca, 0x001e}, {0x84cb, 0x0096}, {0x84cc, 0x0044}, +{0x84cd, 0x0085}, {0x84ce, 0x0010}, {0x84cf, 0x0026}, +{0x84d0, 0x0013}, {0x84d1, 0x00b6}, {0x84d2, 0x0012}, +{0x84d3, 0x0050}, {0x84d4, 0x00ba}, {0x84d5, 0x0001}, +{0x84d6, 0x003c}, {0x84d7, 0x0085}, {0x84d8, 0x0010}, +{0x84d9, 0x0026}, {0x84da, 0x0009}, {0x84db, 0x00ce}, +{0x84dc, 0x0084}, {0x84dd, 0x0053}, {0x84de, 0x00ff}, +{0x84df, 0x0001}, {0x84e0, 0x0011}, {0x84e1, 0x007e}, +{0x84e2, 0x0085}, {0x84e3, 0x001e}, {0x84e4, 0x00b6}, +{0x84e5, 0x0010}, {0x84e6, 0x0031}, {0x84e7, 0x008a}, +{0x84e8, 0x0002}, {0x84e9, 0x00b7}, {0x84ea, 0x0010}, +{0x84eb, 0x0031}, {0x84ec, 0x00bd}, {0x84ed, 0x0085}, +{0x84ee, 0x001f}, {0x84ef, 0x00bd}, {0x84f0, 0x00f8}, +{0x84f1, 0x0037}, {0x84f2, 0x007c}, {0x84f3, 0x0000}, +{0x84f4, 0x0080}, {0x84f5, 0x00ce}, {0x84f6, 0x0084}, +{0x84f7, 0x00fe}, {0x84f8, 0x00ff}, {0x84f9, 0x0001}, +{0x84fa, 0x0011}, {0x84fb, 0x007e}, {0x84fc, 0x0085}, +{0x84fd, 0x001e}, {0x84fe, 0x0096}, {0x84ff, 0x0046}, +{0x8500, 0x0084}, {0x8501, 0x0003}, {0x8502, 0x0081}, +{0x8503, 0x0002}, {0x8504, 0x0026}, {0x8505, 0x0009}, +{0x8506, 0x00b6}, {0x8507, 0x0012}, {0x8508, 0x0030}, +{0x8509, 0x0084}, {0x850a, 0x0003}, {0x850b, 0x0081}, +{0x850c, 0x0001}, {0x850d, 0x0027}, {0x850e, 0x000f}, +{0x850f, 0x00bd}, {0x8510, 0x00f8}, {0x8511, 0x0044}, +{0x8512, 0x00bd}, {0x8513, 0x00f7}, {0x8514, 0x000b}, +{0x8515, 0x00bd}, {0x8516, 0x00fc}, {0x8517, 0x0029}, +{0x8518, 0x00ce}, {0x8519, 0x0084}, {0x851a, 0x0026}, +{0x851b, 0x00ff}, {0x851c, 0x0001}, {0x851d, 0x0011}, +{0x851e, 0x0039}, {0x851f, 0x00d6}, {0x8520, 0x0022}, +{0x8521, 0x00c4}, {0x8522, 0x000f}, {0x8523, 0x00b6}, +{0x8524, 0x0012}, {0x8525, 0x0030}, {0x8526, 0x00ba}, +{0x8527, 0x0012}, {0x8528, 0x0032}, {0x8529, 0x0084}, +{0x852a, 0x0004}, {0x852b, 0x0027}, {0x852c, 0x000d}, +{0x852d, 0x0096}, {0x852e, 0x0022}, {0x852f, 0x0085}, +{0x8530, 0x0004}, {0x8531, 0x0027}, {0x8532, 0x0005}, +{0x8533, 0x00ca}, {0x8534, 0x0010}, {0x8535, 0x007e}, +{0x8536, 0x0085}, {0x8537, 0x003a}, {0x8538, 0x00ca}, +{0x8539, 0x0020}, {0x853a, 0x00d7}, {0x853b, 0x0022}, +{0x853c, 0x0039}, {0x853d, 0x0086}, {0x853e, 0x0000}, +{0x853f, 0x0097}, {0x8540, 0x0083}, {0x8541, 0x0018}, +{0x8542, 0x00ce}, {0x8543, 0x001c}, {0x8544, 0x0000}, +{0x8545, 0x00bd}, {0x8546, 0x00eb}, {0x8547, 0x0046}, +{0x8548, 0x0096}, {0x8549, 0x0057}, {0x854a, 0x0085}, +{0x854b, 0x0001}, {0x854c, 0x0027}, {0x854d, 0x0002}, +{0x854e, 0x004f}, {0x854f, 0x0039}, {0x8550, 0x0085}, +{0x8551, 0x0002}, {0x8552, 0x0027}, {0x8553, 0x0001}, +{0x8554, 0x0039}, {0x8555, 0x007f}, {0x8556, 0x008f}, +{0x8557, 0x007d}, {0x8558, 0x0086}, {0x8559, 0x0004}, +{0x855a, 0x00b7}, {0x855b, 0x0012}, {0x855c, 0x0004}, +{0x855d, 0x0086}, {0x855e, 0x0008}, {0x855f, 0x00b7}, +{0x8560, 0x0012}, {0x8561, 0x0007}, {0x8562, 0x0086}, +{0x8563, 0x0010}, {0x8564, 0x00b7}, {0x8565, 0x0012}, +{0x8566, 0x000c}, {0x8567, 0x0086}, {0x8568, 0x0007}, +{0x8569, 0x00b7}, {0x856a, 0x0012}, {0x856b, 0x0006}, +{0x856c, 0x00b6}, {0x856d, 0x008f}, {0x856e, 0x007d}, +{0x856f, 0x00b7}, {0x8570, 0x0012}, {0x8571, 0x0070}, +{0x8572, 0x0086}, {0x8573, 0x0001}, {0x8574, 0x00ba}, +{0x8575, 0x0012}, {0x8576, 0x0004}, {0x8577, 0x00b7}, +{0x8578, 0x0012}, {0x8579, 0x0004}, {0x857a, 0x0001}, +{0x857b, 0x0001}, {0x857c, 0x0001}, {0x857d, 0x0001}, +{0x857e, 0x0001}, {0x857f, 0x0001}, {0x8580, 0x00b6}, +{0x8581, 0x0012}, {0x8582, 0x0004}, {0x8583, 0x0084}, +{0x8584, 0x00fe}, {0x8585, 0x008a}, {0x8586, 0x0002}, +{0x8587, 0x00b7}, {0x8588, 0x0012}, {0x8589, 0x0004}, +{0x858a, 0x0001}, {0x858b, 0x0001}, {0x858c, 0x0001}, +{0x858d, 0x0001}, {0x858e, 0x0001}, {0x858f, 0x0001}, +{0x8590, 0x0086}, {0x8591, 0x00fd}, {0x8592, 0x00b4}, +{0x8593, 0x0012}, {0x8594, 0x0004}, {0x8595, 0x00b7}, +{0x8596, 0x0012}, {0x8597, 0x0004}, {0x8598, 0x00b6}, +{0x8599, 0x0012}, {0x859a, 0x0000}, {0x859b, 0x0084}, +{0x859c, 0x0008}, {0x859d, 0x0081}, {0x859e, 0x0008}, +{0x859f, 0x0027}, {0x85a0, 0x0016}, {0x85a1, 0x00b6}, +{0x85a2, 0x008f}, {0x85a3, 0x007d}, {0x85a4, 0x0081}, +{0x85a5, 0x000c}, {0x85a6, 0x0027}, {0x85a7, 0x0008}, +{0x85a8, 0x008b}, {0x85a9, 0x0004}, {0x85aa, 0x00b7}, +{0x85ab, 0x008f}, {0x85ac, 0x007d}, {0x85ad, 0x007e}, +{0x85ae, 0x0085}, {0x85af, 0x006c}, {0x85b0, 0x0086}, +{0x85b1, 0x0003}, {0x85b2, 0x0097}, {0x85b3, 0x0040}, +{0x85b4, 0x007e}, {0x85b5, 0x0089}, {0x85b6, 0x006e}, +{0x85b7, 0x0086}, {0x85b8, 0x0007}, {0x85b9, 0x00b7}, +{0x85ba, 0x0012}, {0x85bb, 0x0006}, {0x85bc, 0x005f}, +{0x85bd, 0x00f7}, {0x85be, 0x008f}, {0x85bf, 0x0082}, +{0x85c0, 0x005f}, {0x85c1, 0x00f7}, {0x85c2, 0x008f}, +{0x85c3, 0x007f}, {0x85c4, 0x00f7}, {0x85c5, 0x008f}, +{0x85c6, 0x0070}, {0x85c7, 0x00f7}, {0x85c8, 0x008f}, +{0x85c9, 0x0071}, {0x85ca, 0x00f7}, {0x85cb, 0x008f}, +{0x85cc, 0x0072}, {0x85cd, 0x00f7}, {0x85ce, 0x008f}, +{0x85cf, 0x0073}, {0x85d0, 0x00f7}, {0x85d1, 0x008f}, +{0x85d2, 0x0074}, {0x85d3, 0x00f7}, {0x85d4, 0x008f}, +{0x85d5, 0x0075}, {0x85d6, 0x00f7}, {0x85d7, 0x008f}, +{0x85d8, 0x0076}, {0x85d9, 0x00f7}, {0x85da, 0x008f}, +{0x85db, 0x0077}, {0x85dc, 0x00f7}, {0x85dd, 0x008f}, +{0x85de, 0x0078}, {0x85df, 0x00f7}, {0x85e0, 0x008f}, +{0x85e1, 0x0079}, {0x85e2, 0x00f7}, {0x85e3, 0x008f}, +{0x85e4, 0x007a}, {0x85e5, 0x00f7}, {0x85e6, 0x008f}, +{0x85e7, 0x007b}, {0x85e8, 0x00b6}, {0x85e9, 0x0012}, +{0x85ea, 0x0004}, {0x85eb, 0x008a}, {0x85ec, 0x0010}, +{0x85ed, 0x00b7}, {0x85ee, 0x0012}, {0x85ef, 0x0004}, +{0x85f0, 0x0086}, {0x85f1, 0x00e4}, {0x85f2, 0x00b7}, +{0x85f3, 0x0012}, {0x85f4, 0x0070}, {0x85f5, 0x00b7}, +{0x85f6, 0x0012}, {0x85f7, 0x0007}, {0x85f8, 0x00f7}, +{0x85f9, 0x0012}, {0x85fa, 0x0005}, {0x85fb, 0x00f7}, +{0x85fc, 0x0012}, {0x85fd, 0x0009}, {0x85fe, 0x0086}, +{0x85ff, 0x0008}, {0x8600, 0x00ba}, {0x8601, 0x0012}, +{0x8602, 0x0004}, {0x8603, 0x00b7}, {0x8604, 0x0012}, +{0x8605, 0x0004}, {0x8606, 0x0086}, {0x8607, 0x00f7}, +{0x8608, 0x00b4}, {0x8609, 0x0012}, {0x860a, 0x0004}, +{0x860b, 0x00b7}, {0x860c, 0x0012}, {0x860d, 0x0004}, +{0x860e, 0x0001}, {0x860f, 0x0001}, {0x8610, 0x0001}, +{0x8611, 0x0001}, {0x8612, 0x0001}, {0x8613, 0x0001}, +{0x8614, 0x00b6}, {0x8615, 0x0012}, {0x8616, 0x0008}, +{0x8617, 0x0027}, {0x8618, 0x007f}, {0x8619, 0x0081}, +{0x861a, 0x0080}, {0x861b, 0x0026}, {0x861c, 0x000b}, +{0x861d, 0x0086}, {0x861e, 0x0008}, {0x861f, 0x00ce}, +{0x8620, 0x008f}, {0x8621, 0x0079}, {0x8622, 0x00bd}, +{0x8623, 0x0089}, {0x8624, 0x007b}, {0x8625, 0x007e}, +{0x8626, 0x0086}, {0x8627, 0x008e}, {0x8628, 0x0081}, +{0x8629, 0x0040}, {0x862a, 0x0026}, {0x862b, 0x000b}, +{0x862c, 0x0086}, {0x862d, 0x0004}, {0x862e, 0x00ce}, +{0x862f, 0x008f}, {0x8630, 0x0076}, {0x8631, 0x00bd}, +{0x8632, 0x0089}, {0x8633, 0x007b}, {0x8634, 0x007e}, +{0x8635, 0x0086}, {0x8636, 0x008e}, {0x8637, 0x0081}, +{0x8638, 0x0020}, {0x8639, 0x0026}, {0x863a, 0x000b}, +{0x863b, 0x0086}, {0x863c, 0x0002}, {0x863d, 0x00ce}, +{0x863e, 0x008f}, {0x863f, 0x0073}, {0x8640, 0x00bd}, +{0x8641, 0x0089}, {0x8642, 0x007b}, {0x8643, 0x007e}, +{0x8644, 0x0086}, {0x8645, 0x008e}, {0x8646, 0x0081}, +{0x8647, 0x0010}, {0x8648, 0x0026}, {0x8649, 0x000b}, +{0x864a, 0x0086}, {0x864b, 0x0001}, {0x864c, 0x00ce}, +{0x864d, 0x008f}, {0x864e, 0x0070}, {0x864f, 0x00bd}, +{0x8650, 0x0089}, {0x8651, 0x007b}, {0x8652, 0x007e}, +{0x8653, 0x0086}, {0x8654, 0x008e}, {0x8655, 0x0081}, +{0x8656, 0x0008}, {0x8657, 0x0026}, {0x8658, 0x000b}, +{0x8659, 0x0086}, {0x865a, 0x0008}, {0x865b, 0x00ce}, +{0x865c, 0x008f}, {0x865d, 0x0079}, {0x865e, 0x00bd}, +{0x865f, 0x0089}, {0x8660, 0x007f}, {0x8661, 0x007e}, +{0x8662, 0x0086}, {0x8663, 0x008e}, {0x8664, 0x0081}, +{0x8665, 0x0004}, {0x8666, 0x0026}, {0x8667, 0x000b}, +{0x8668, 0x0086}, {0x8669, 0x0004}, {0x866a, 0x00ce}, +{0x866b, 0x008f}, {0x866c, 0x0076}, {0x866d, 0x00bd}, +{0x866e, 0x0089}, {0x866f, 0x007f}, {0x8670, 0x007e}, +{0x8671, 0x0086}, {0x8672, 0x008e}, {0x8673, 0x0081}, +{0x8674, 0x0002}, {0x8675, 0x0026}, {0x8676, 0x000b}, +{0x8677, 0x008a}, {0x8678, 0x0002}, {0x8679, 0x00ce}, +{0x867a, 0x008f}, {0x867b, 0x0073}, {0x867c, 0x00bd}, +{0x867d, 0x0089}, {0x867e, 0x007f}, {0x867f, 0x007e}, +{0x8680, 0x0086}, {0x8681, 0x008e}, {0x8682, 0x0081}, +{0x8683, 0x0001}, {0x8684, 0x0026}, {0x8685, 0x0008}, +{0x8686, 0x0086}, {0x8687, 0x0001}, {0x8688, 0x00ce}, +{0x8689, 0x008f}, {0x868a, 0x0070}, {0x868b, 0x00bd}, +{0x868c, 0x0089}, {0x868d, 0x007f}, {0x868e, 0x00b6}, +{0x868f, 0x008f}, {0x8690, 0x007f}, {0x8691, 0x0081}, +{0x8692, 0x000f}, {0x8693, 0x0026}, {0x8694, 0x0003}, +{0x8695, 0x007e}, {0x8696, 0x0087}, {0x8697, 0x0047}, +{0x8698, 0x00b6}, {0x8699, 0x0012}, {0x869a, 0x0009}, +{0x869b, 0x0084}, {0x869c, 0x0003}, {0x869d, 0x0081}, +{0x869e, 0x0003}, {0x869f, 0x0027}, {0x86a0, 0x0006}, +{0x86a1, 0x007c}, {0x86a2, 0x0012}, {0x86a3, 0x0009}, +{0x86a4, 0x007e}, {0x86a5, 0x0085}, {0x86a6, 0x00fe}, +{0x86a7, 0x00b6}, {0x86a8, 0x0012}, {0x86a9, 0x0006}, +{0x86aa, 0x0084}, {0x86ab, 0x0007}, {0x86ac, 0x0081}, +{0x86ad, 0x0007}, {0x86ae, 0x0027}, {0x86af, 0x0008}, +{0x86b0, 0x008b}, {0x86b1, 0x0001}, {0x86b2, 0x00b7}, +{0x86b3, 0x0012}, {0x86b4, 0x0006}, {0x86b5, 0x007e}, +{0x86b6, 0x0086}, {0x86b7, 0x00d5}, {0x86b8, 0x00b6}, +{0x86b9, 0x008f}, {0x86ba, 0x0082}, {0x86bb, 0x0026}, +{0x86bc, 0x000a}, {0x86bd, 0x007c}, {0x86be, 0x008f}, +{0x86bf, 0x0082}, {0x86c0, 0x004f}, {0x86c1, 0x00b7}, +{0x86c2, 0x0012}, {0x86c3, 0x0006}, {0x86c4, 0x007e}, +{0x86c5, 0x0085}, {0x86c6, 0x00c0}, {0x86c7, 0x00b6}, +{0x86c8, 0x0012}, {0x86c9, 0x0006}, {0x86ca, 0x0084}, +{0x86cb, 0x003f}, {0x86cc, 0x0081}, {0x86cd, 0x003f}, +{0x86ce, 0x0027}, {0x86cf, 0x0010}, {0x86d0, 0x008b}, +{0x86d1, 0x0008}, {0x86d2, 0x00b7}, {0x86d3, 0x0012}, +{0x86d4, 0x0006}, {0x86d5, 0x00b6}, {0x86d6, 0x0012}, +{0x86d7, 0x0009}, {0x86d8, 0x0084}, {0x86d9, 0x00fc}, +{0x86da, 0x00b7}, {0x86db, 0x0012}, {0x86dc, 0x0009}, +{0x86dd, 0x007e}, {0x86de, 0x0085}, {0x86df, 0x00fe}, +{0x86e0, 0x00ce}, {0x86e1, 0x008f}, {0x86e2, 0x0070}, +{0x86e3, 0x0018}, {0x86e4, 0x00ce}, {0x86e5, 0x008f}, +{0x86e6, 0x0084}, {0x86e7, 0x00c6}, {0x86e8, 0x000c}, +{0x86e9, 0x00bd}, {0x86ea, 0x0089}, {0x86eb, 0x006f}, +{0x86ec, 0x00ce}, {0x86ed, 0x008f}, {0x86ee, 0x0084}, +{0x86ef, 0x0018}, {0x86f0, 0x00ce}, {0x86f1, 0x008f}, +{0x86f2, 0x0070}, {0x86f3, 0x00c6}, {0x86f4, 0x000c}, +{0x86f5, 0x00bd}, {0x86f6, 0x0089}, {0x86f7, 0x006f}, +{0x86f8, 0x00d6}, {0x86f9, 0x0083}, {0x86fa, 0x00c1}, +{0x86fb, 0x004f}, {0x86fc, 0x002d}, {0x86fd, 0x0003}, +{0x86fe, 0x007e}, {0x86ff, 0x0087}, {0x8700, 0x0040}, +{0x8701, 0x00b6}, {0x8702, 0x008f}, {0x8703, 0x007f}, +{0x8704, 0x0081}, {0x8705, 0x0007}, {0x8706, 0x0027}, +{0x8707, 0x000f}, {0x8708, 0x0081}, {0x8709, 0x000b}, +{0x870a, 0x0027}, {0x870b, 0x0015}, {0x870c, 0x0081}, +{0x870d, 0x000d}, {0x870e, 0x0027}, {0x870f, 0x001b}, +{0x8710, 0x0081}, {0x8711, 0x000e}, {0x8712, 0x0027}, +{0x8713, 0x0021}, {0x8714, 0x007e}, {0x8715, 0x0087}, +{0x8716, 0x0040}, {0x8717, 0x00f7}, {0x8718, 0x008f}, +{0x8719, 0x007b}, {0x871a, 0x0086}, {0x871b, 0x0002}, +{0x871c, 0x00b7}, {0x871d, 0x008f}, {0x871e, 0x007a}, +{0x871f, 0x0020}, {0x8720, 0x001c}, {0x8721, 0x00f7}, +{0x8722, 0x008f}, {0x8723, 0x0078}, {0x8724, 0x0086}, +{0x8725, 0x0002}, {0x8726, 0x00b7}, {0x8727, 0x008f}, +{0x8728, 0x0077}, {0x8729, 0x0020}, {0x872a, 0x0012}, +{0x872b, 0x00f7}, {0x872c, 0x008f}, {0x872d, 0x0075}, +{0x872e, 0x0086}, {0x872f, 0x0002}, {0x8730, 0x00b7}, +{0x8731, 0x008f}, {0x8732, 0x0074}, {0x8733, 0x0020}, +{0x8734, 0x0008}, {0x8735, 0x00f7}, {0x8736, 0x008f}, +{0x8737, 0x0072}, {0x8738, 0x0086}, {0x8739, 0x0002}, +{0x873a, 0x00b7}, {0x873b, 0x008f}, {0x873c, 0x0071}, +{0x873d, 0x007e}, {0x873e, 0x0087}, {0x873f, 0x0047}, +{0x8740, 0x0086}, {0x8741, 0x0004}, {0x8742, 0x0097}, +{0x8743, 0x0040}, {0x8744, 0x007e}, {0x8745, 0x0089}, +{0x8746, 0x006e}, {0x8747, 0x00ce}, {0x8748, 0x008f}, +{0x8749, 0x0072}, {0x874a, 0x00bd}, {0x874b, 0x0089}, +{0x874c, 0x00f7}, {0x874d, 0x00ce}, {0x874e, 0x008f}, +{0x874f, 0x0075}, {0x8750, 0x00bd}, {0x8751, 0x0089}, +{0x8752, 0x00f7}, {0x8753, 0x00ce}, {0x8754, 0x008f}, +{0x8755, 0x0078}, {0x8756, 0x00bd}, {0x8757, 0x0089}, +{0x8758, 0x00f7}, {0x8759, 0x00ce}, {0x875a, 0x008f}, +{0x875b, 0x007b}, {0x875c, 0x00bd}, {0x875d, 0x0089}, +{0x875e, 0x00f7}, {0x875f, 0x004f}, {0x8760, 0x00b7}, +{0x8761, 0x008f}, {0x8762, 0x007d}, {0x8763, 0x00b7}, +{0x8764, 0x008f}, {0x8765, 0x0081}, {0x8766, 0x00b6}, +{0x8767, 0x008f}, {0x8768, 0x0072}, {0x8769, 0x0027}, +{0x876a, 0x0047}, {0x876b, 0x007c}, {0x876c, 0x008f}, +{0x876d, 0x007d}, {0x876e, 0x00b6}, {0x876f, 0x008f}, +{0x8770, 0x0075}, {0x8771, 0x0027}, {0x8772, 0x003f}, +{0x8773, 0x007c}, {0x8774, 0x008f}, {0x8775, 0x007d}, +{0x8776, 0x00b6}, {0x8777, 0x008f}, {0x8778, 0x0078}, +{0x8779, 0x0027}, {0x877a, 0x0037}, {0x877b, 0x007c}, +{0x877c, 0x008f}, {0x877d, 0x007d}, {0x877e, 0x00b6}, +{0x877f, 0x008f}, {0x8780, 0x007b}, {0x8781, 0x0027}, +{0x8782, 0x002f}, {0x8783, 0x007f}, {0x8784, 0x008f}, +{0x8785, 0x007d}, {0x8786, 0x007c}, {0x8787, 0x008f}, +{0x8788, 0x0081}, {0x8789, 0x007a}, {0x878a, 0x008f}, +{0x878b, 0x0072}, {0x878c, 0x0027}, {0x878d, 0x001b}, +{0x878e, 0x007c}, {0x878f, 0x008f}, {0x8790, 0x007d}, +{0x8791, 0x007a}, {0x8792, 0x008f}, {0x8793, 0x0075}, +{0x8794, 0x0027}, {0x8795, 0x0016}, {0x8796, 0x007c}, +{0x8797, 0x008f}, {0x8798, 0x007d}, {0x8799, 0x007a}, +{0x879a, 0x008f}, {0x879b, 0x0078}, {0x879c, 0x0027}, +{0x879d, 0x0011}, {0x879e, 0x007c}, {0x879f, 0x008f}, +{0x87a0, 0x007d}, {0x87a1, 0x007a}, {0x87a2, 0x008f}, +{0x87a3, 0x007b}, {0x87a4, 0x0027}, {0x87a5, 0x000c}, +{0x87a6, 0x007e}, {0x87a7, 0x0087}, {0x87a8, 0x0083}, +{0x87a9, 0x007a}, {0x87aa, 0x008f}, {0x87ab, 0x0075}, +{0x87ac, 0x007a}, {0x87ad, 0x008f}, {0x87ae, 0x0078}, +{0x87af, 0x007a}, {0x87b0, 0x008f}, {0x87b1, 0x007b}, +{0x87b2, 0x00ce}, {0x87b3, 0x00c1}, {0x87b4, 0x00fc}, +{0x87b5, 0x00f6}, {0x87b6, 0x008f}, {0x87b7, 0x007d}, +{0x87b8, 0x003a}, {0x87b9, 0x00a6}, {0x87ba, 0x0000}, +{0x87bb, 0x00b7}, {0x87bc, 0x0012}, {0x87bd, 0x0070}, +{0x87be, 0x00b6}, {0x87bf, 0x008f}, {0x87c0, 0x0072}, +{0x87c1, 0x0026}, {0x87c2, 0x0003}, {0x87c3, 0x007e}, +{0x87c4, 0x0087}, {0x87c5, 0x00fa}, {0x87c6, 0x00b6}, +{0x87c7, 0x008f}, {0x87c8, 0x0075}, {0x87c9, 0x0026}, +{0x87ca, 0x000a}, {0x87cb, 0x0018}, {0x87cc, 0x00ce}, +{0x87cd, 0x008f}, {0x87ce, 0x0073}, {0x87cf, 0x00bd}, +{0x87d0, 0x0089}, {0x87d1, 0x00d5}, {0x87d2, 0x007e}, +{0x87d3, 0x0087}, {0x87d4, 0x00fa}, {0x87d5, 0x00b6}, +{0x87d6, 0x008f}, {0x87d7, 0x0078}, {0x87d8, 0x0026}, +{0x87d9, 0x000a}, {0x87da, 0x0018}, {0x87db, 0x00ce}, +{0x87dc, 0x008f}, {0x87dd, 0x0076}, {0x87de, 0x00bd}, +{0x87df, 0x0089}, {0x87e0, 0x00d5}, {0x87e1, 0x007e}, +{0x87e2, 0x0087}, {0x87e3, 0x00fa}, {0x87e4, 0x00b6}, +{0x87e5, 0x008f}, {0x87e6, 0x007b}, {0x87e7, 0x0026}, +{0x87e8, 0x000a}, {0x87e9, 0x0018}, {0x87ea, 0x00ce}, +{0x87eb, 0x008f}, {0x87ec, 0x0079}, {0x87ed, 0x00bd}, +{0x87ee, 0x0089}, {0x87ef, 0x00d5}, {0x87f0, 0x007e}, +{0x87f1, 0x0087}, {0x87f2, 0x00fa}, {0x87f3, 0x0086}, +{0x87f4, 0x0005}, {0x87f5, 0x0097}, {0x87f6, 0x0040}, +{0x87f7, 0x007e}, {0x87f8, 0x0089}, {0x87f9, 0x0000}, +{0x87fa, 0x00b6}, {0x87fb, 0x008f}, {0x87fc, 0x0075}, +{0x87fd, 0x0081}, {0x87fe, 0x0007}, {0x87ff, 0x002e}, +{0x8800, 0x00f2}, {0x8801, 0x00f6}, {0x8802, 0x0012}, +{0x8803, 0x0006}, {0x8804, 0x00c4}, {0x8805, 0x00f8}, +{0x8806, 0x001b}, {0x8807, 0x00b7}, {0x8808, 0x0012}, +{0x8809, 0x0006}, {0x880a, 0x00b6}, {0x880b, 0x008f}, +{0x880c, 0x0078}, {0x880d, 0x0081}, {0x880e, 0x0007}, +{0x880f, 0x002e}, {0x8810, 0x00e2}, {0x8811, 0x0048}, +{0x8812, 0x0048}, {0x8813, 0x0048}, {0x8814, 0x00f6}, +{0x8815, 0x0012}, {0x8816, 0x0006}, {0x8817, 0x00c4}, +{0x8818, 0x00c7}, {0x8819, 0x001b}, {0x881a, 0x00b7}, +{0x881b, 0x0012}, {0x881c, 0x0006}, {0x881d, 0x00b6}, +{0x881e, 0x008f}, {0x881f, 0x007b}, {0x8820, 0x0081}, +{0x8821, 0x0007}, {0x8822, 0x002e}, {0x8823, 0x00cf}, +{0x8824, 0x00f6}, {0x8825, 0x0012}, {0x8826, 0x0005}, +{0x8827, 0x00c4}, {0x8828, 0x00f8}, {0x8829, 0x001b}, +{0x882a, 0x00b7}, {0x882b, 0x0012}, {0x882c, 0x0005}, +{0x882d, 0x0086}, {0x882e, 0x0000}, {0x882f, 0x00f6}, +{0x8830, 0x008f}, {0x8831, 0x0071}, {0x8832, 0x00bd}, +{0x8833, 0x0089}, {0x8834, 0x0094}, {0x8835, 0x0086}, +{0x8836, 0x0001}, {0x8837, 0x00f6}, {0x8838, 0x008f}, +{0x8839, 0x0074}, {0x883a, 0x00bd}, {0x883b, 0x0089}, +{0x883c, 0x0094}, {0x883d, 0x0086}, {0x883e, 0x0002}, +{0x883f, 0x00f6}, {0x8840, 0x008f}, {0x8841, 0x0077}, +{0x8842, 0x00bd}, {0x8843, 0x0089}, {0x8844, 0x0094}, +{0x8845, 0x0086}, {0x8846, 0x0003}, {0x8847, 0x00f6}, +{0x8848, 0x008f}, {0x8849, 0x007a}, {0x884a, 0x00bd}, +{0x884b, 0x0089}, {0x884c, 0x0094}, {0x884d, 0x00ce}, +{0x884e, 0x008f}, {0x884f, 0x0070}, {0x8850, 0x00a6}, +{0x8851, 0x0001}, {0x8852, 0x0081}, {0x8853, 0x0001}, +{0x8854, 0x0027}, {0x8855, 0x0007}, {0x8856, 0x0081}, +{0x8857, 0x0003}, {0x8858, 0x0027}, {0x8859, 0x0003}, +{0x885a, 0x007e}, {0x885b, 0x0088}, {0x885c, 0x0066}, +{0x885d, 0x00a6}, {0x885e, 0x0000}, {0x885f, 0x00b8}, +{0x8860, 0x008f}, {0x8861, 0x0081}, {0x8862, 0x0084}, +{0x8863, 0x0001}, {0x8864, 0x0026}, {0x8865, 0x000b}, +{0x8866, 0x008c}, {0x8867, 0x008f}, {0x8868, 0x0079}, +{0x8869, 0x002c}, {0x886a, 0x000e}, {0x886b, 0x0008}, +{0x886c, 0x0008}, {0x886d, 0x0008}, {0x886e, 0x007e}, +{0x886f, 0x0088}, {0x8870, 0x0050}, {0x8871, 0x00b6}, +{0x8872, 0x0012}, {0x8873, 0x0004}, {0x8874, 0x008a}, +{0x8875, 0x0040}, {0x8876, 0x00b7}, {0x8877, 0x0012}, +{0x8878, 0x0004}, {0x8879, 0x00b6}, {0x887a, 0x0012}, +{0x887b, 0x0004}, {0x887c, 0x0084}, {0x887d, 0x00fb}, +{0x887e, 0x0084}, {0x887f, 0x00ef}, {0x8880, 0x00b7}, +{0x8881, 0x0012}, {0x8882, 0x0004}, {0x8883, 0x00b6}, +{0x8884, 0x0012}, {0x8885, 0x0007}, {0x8886, 0x0036}, +{0x8887, 0x00b6}, {0x8888, 0x008f}, {0x8889, 0x007c}, +{0x888a, 0x0048}, {0x888b, 0x0048}, {0x888c, 0x00b7}, +{0x888d, 0x0012}, {0x888e, 0x0007}, {0x888f, 0x0086}, +{0x8890, 0x0001}, {0x8891, 0x00ba}, {0x8892, 0x0012}, +{0x8893, 0x0004}, {0x8894, 0x00b7}, {0x8895, 0x0012}, +{0x8896, 0x0004}, {0x8897, 0x0001}, {0x8898, 0x0001}, +{0x8899, 0x0001}, {0x889a, 0x0001}, {0x889b, 0x0001}, +{0x889c, 0x0001}, {0x889d, 0x0086}, {0x889e, 0x00fe}, +{0x889f, 0x00b4}, {0x88a0, 0x0012}, {0x88a1, 0x0004}, +{0x88a2, 0x00b7}, {0x88a3, 0x0012}, {0x88a4, 0x0004}, +{0x88a5, 0x0086}, {0x88a6, 0x0002}, {0x88a7, 0x00ba}, +{0x88a8, 0x0012}, {0x88a9, 0x0004}, {0x88aa, 0x00b7}, +{0x88ab, 0x0012}, {0x88ac, 0x0004}, {0x88ad, 0x0086}, +{0x88ae, 0x00fd}, {0x88af, 0x00b4}, {0x88b0, 0x0012}, +{0x88b1, 0x0004}, {0x88b2, 0x00b7}, {0x88b3, 0x0012}, +{0x88b4, 0x0004}, {0x88b5, 0x0032}, {0x88b6, 0x00b7}, +{0x88b7, 0x0012}, {0x88b8, 0x0007}, {0x88b9, 0x00b6}, +{0x88ba, 0x0012}, {0x88bb, 0x0000}, {0x88bc, 0x0084}, +{0x88bd, 0x0008}, {0x88be, 0x0081}, {0x88bf, 0x0008}, +{0x88c0, 0x0027}, {0x88c1, 0x000f}, {0x88c2, 0x007c}, +{0x88c3, 0x0082}, {0x88c4, 0x0008}, {0x88c5, 0x0026}, +{0x88c6, 0x0007}, {0x88c7, 0x0086}, {0x88c8, 0x0076}, +{0x88c9, 0x0097}, {0x88ca, 0x0040}, {0x88cb, 0x007e}, +{0x88cc, 0x0089}, {0x88cd, 0x006e}, {0x88ce, 0x007e}, +{0x88cf, 0x0086}, {0x88d0, 0x00ec}, {0x88d1, 0x00b6}, +{0x88d2, 0x008f}, {0x88d3, 0x007f}, {0x88d4, 0x0081}, +{0x88d5, 0x000f}, {0x88d6, 0x0027}, {0x88d7, 0x003c}, +{0x88d8, 0x00bd}, {0x88d9, 0x00e6}, {0x88da, 0x00c7}, +{0x88db, 0x00b7}, {0x88dc, 0x0012}, {0x88dd, 0x000d}, +{0x88de, 0x00bd}, {0x88df, 0x00e6}, {0x88e0, 0x00cb}, +{0x88e1, 0x00b6}, {0x88e2, 0x0012}, {0x88e3, 0x0004}, +{0x88e4, 0x008a}, {0x88e5, 0x0020}, {0x88e6, 0x00b7}, +{0x88e7, 0x0012}, {0x88e8, 0x0004}, {0x88e9, 0x00ce}, +{0x88ea, 0x00ff}, {0x88eb, 0x00ff}, {0x88ec, 0x00b6}, +{0x88ed, 0x0012}, {0x88ee, 0x0000}, {0x88ef, 0x0081}, +{0x88f0, 0x000c}, {0x88f1, 0x0026}, {0x88f2, 0x0005}, +{0x88f3, 0x0009}, {0x88f4, 0x0026}, {0x88f5, 0x00f6}, +{0x88f6, 0x0027}, {0x88f7, 0x001c}, {0x88f8, 0x00b6}, +{0x88f9, 0x0012}, {0x88fa, 0x0004}, {0x88fb, 0x0084}, +{0x88fc, 0x00df}, {0x88fd, 0x00b7}, {0x88fe, 0x0012}, +{0x88ff, 0x0004}, {0x8900, 0x0096}, {0x8901, 0x0083}, +{0x8902, 0x0081}, {0x8903, 0x0007}, {0x8904, 0x002c}, +{0x8905, 0x0005}, {0x8906, 0x007c}, {0x8907, 0x0000}, +{0x8908, 0x0083}, {0x8909, 0x0020}, {0x890a, 0x0006}, +{0x890b, 0x0096}, {0x890c, 0x0083}, {0x890d, 0x008b}, +{0x890e, 0x0008}, {0x890f, 0x0097}, {0x8910, 0x0083}, +{0x8911, 0x007e}, {0x8912, 0x0085}, {0x8913, 0x0041}, +{0x8914, 0x007f}, {0x8915, 0x008f}, {0x8916, 0x007e}, +{0x8917, 0x0086}, {0x8918, 0x0080}, {0x8919, 0x00b7}, +{0x891a, 0x0012}, {0x891b, 0x000c}, {0x891c, 0x0086}, +{0x891d, 0x0001}, {0x891e, 0x00b7}, {0x891f, 0x008f}, +{0x8920, 0x007d}, {0x8921, 0x00b6}, {0x8922, 0x0012}, +{0x8923, 0x000c}, {0x8924, 0x0084}, {0x8925, 0x007f}, +{0x8926, 0x00b7}, {0x8927, 0x0012}, {0x8928, 0x000c}, +{0x8929, 0x008a}, {0x892a, 0x0080}, {0x892b, 0x00b7}, +{0x892c, 0x0012}, {0x892d, 0x000c}, {0x892e, 0x0086}, +{0x892f, 0x000a}, {0x8930, 0x00bd}, {0x8931, 0x008a}, +{0x8932, 0x0006}, {0x8933, 0x00b6}, {0x8934, 0x0012}, +{0x8935, 0x000a}, {0x8936, 0x002a}, {0x8937, 0x0009}, +{0x8938, 0x00b6}, {0x8939, 0x0012}, {0x893a, 0x000c}, +{0x893b, 0x00ba}, {0x893c, 0x008f}, {0x893d, 0x007d}, +{0x893e, 0x00b7}, {0x893f, 0x0012}, {0x8940, 0x000c}, +{0x8941, 0x00b6}, {0x8942, 0x008f}, {0x8943, 0x007e}, +{0x8944, 0x0081}, {0x8945, 0x0060}, {0x8946, 0x0027}, +{0x8947, 0x001a}, {0x8948, 0x008b}, {0x8949, 0x0020}, +{0x894a, 0x00b7}, {0x894b, 0x008f}, {0x894c, 0x007e}, +{0x894d, 0x00b6}, {0x894e, 0x0012}, {0x894f, 0x000c}, +{0x8950, 0x0084}, {0x8951, 0x009f}, {0x8952, 0x00ba}, +{0x8953, 0x008f}, {0x8954, 0x007e}, {0x8955, 0x00b7}, +{0x8956, 0x0012}, {0x8957, 0x000c}, {0x8958, 0x00b6}, +{0x8959, 0x008f}, {0x895a, 0x007d}, {0x895b, 0x0048}, +{0x895c, 0x00b7}, {0x895d, 0x008f}, {0x895e, 0x007d}, +{0x895f, 0x007e}, {0x8960, 0x0089}, {0x8961, 0x0021}, +{0x8962, 0x00b6}, {0x8963, 0x0012}, {0x8964, 0x0004}, +{0x8965, 0x008a}, {0x8966, 0x0020}, {0x8967, 0x00b7}, +{0x8968, 0x0012}, {0x8969, 0x0004}, {0x896a, 0x00bd}, +{0x896b, 0x008a}, {0x896c, 0x000a}, {0x896d, 0x004f}, +{0x896e, 0x0039}, {0x896f, 0x00a6}, {0x8970, 0x0000}, +{0x8971, 0x0018}, {0x8972, 0x00a7}, {0x8973, 0x0000}, +{0x8974, 0x0008}, {0x8975, 0x0018}, {0x8976, 0x0008}, +{0x8977, 0x005a}, {0x8978, 0x0026}, {0x8979, 0x00f5}, +{0x897a, 0x0039}, {0x897b, 0x0036}, {0x897c, 0x006c}, +{0x897d, 0x0000}, {0x897e, 0x0032}, {0x897f, 0x00ba}, +{0x8980, 0x008f}, {0x8981, 0x007f}, {0x8982, 0x00b7}, +{0x8983, 0x008f}, {0x8984, 0x007f}, {0x8985, 0x00b6}, +{0x8986, 0x0012}, {0x8987, 0x0009}, {0x8988, 0x0084}, +{0x8989, 0x0003}, {0x898a, 0x00a7}, {0x898b, 0x0001}, +{0x898c, 0x00b6}, {0x898d, 0x0012}, {0x898e, 0x0006}, +{0x898f, 0x0084}, {0x8990, 0x003f}, {0x8991, 0x00a7}, +{0x8992, 0x0002}, {0x8993, 0x0039}, {0x8994, 0x0036}, +{0x8995, 0x0086}, {0x8996, 0x0003}, {0x8997, 0x00b7}, +{0x8998, 0x008f}, {0x8999, 0x0080}, {0x899a, 0x0032}, +{0x899b, 0x00c1}, {0x899c, 0x0000}, {0x899d, 0x0026}, +{0x899e, 0x0006}, {0x899f, 0x00b7}, {0x89a0, 0x008f}, +{0x89a1, 0x007c}, {0x89a2, 0x007e}, {0x89a3, 0x0089}, +{0x89a4, 0x00c9}, {0x89a5, 0x00c1}, {0x89a6, 0x0001}, +{0x89a7, 0x0027}, {0x89a8, 0x0018}, {0x89a9, 0x00c1}, +{0x89aa, 0x0002}, {0x89ab, 0x0027}, {0x89ac, 0x000c}, +{0x89ad, 0x00c1}, {0x89ae, 0x0003}, {0x89af, 0x0027}, +{0x89b0, 0x0000}, {0x89b1, 0x00f6}, {0x89b2, 0x008f}, +{0x89b3, 0x0080}, {0x89b4, 0x0005}, {0x89b5, 0x0005}, +{0x89b6, 0x00f7}, {0x89b7, 0x008f}, {0x89b8, 0x0080}, +{0x89b9, 0x00f6}, {0x89ba, 0x008f}, {0x89bb, 0x0080}, +{0x89bc, 0x0005}, {0x89bd, 0x0005}, {0x89be, 0x00f7}, +{0x89bf, 0x008f}, {0x89c0, 0x0080}, {0x89c1, 0x00f6}, +{0x89c2, 0x008f}, {0x89c3, 0x0080}, {0x89c4, 0x0005}, +{0x89c5, 0x0005}, {0x89c6, 0x00f7}, {0x89c7, 0x008f}, +{0x89c8, 0x0080}, {0x89c9, 0x00f6}, {0x89ca, 0x008f}, +{0x89cb, 0x0080}, {0x89cc, 0x0053}, {0x89cd, 0x00f4}, +{0x89ce, 0x0012}, {0x89cf, 0x0007}, {0x89d0, 0x001b}, +{0x89d1, 0x00b7}, {0x89d2, 0x0012}, {0x89d3, 0x0007}, +{0x89d4, 0x0039}, {0x89d5, 0x00ce}, {0x89d6, 0x008f}, +{0x89d7, 0x0070}, {0x89d8, 0x00a6}, {0x89d9, 0x0000}, +{0x89da, 0x0018}, {0x89db, 0x00e6}, {0x89dc, 0x0000}, +{0x89dd, 0x0018}, {0x89de, 0x00a7}, {0x89df, 0x0000}, +{0x89e0, 0x00e7}, {0x89e1, 0x0000}, {0x89e2, 0x00a6}, +{0x89e3, 0x0001}, {0x89e4, 0x0018}, {0x89e5, 0x00e6}, +{0x89e6, 0x0001}, {0x89e7, 0x0018}, {0x89e8, 0x00a7}, +{0x89e9, 0x0001}, {0x89ea, 0x00e7}, {0x89eb, 0x0001}, +{0x89ec, 0x00a6}, {0x89ed, 0x0002}, {0x89ee, 0x0018}, +{0x89ef, 0x00e6}, {0x89f0, 0x0002}, {0x89f1, 0x0018}, +{0x89f2, 0x00a7}, {0x89f3, 0x0002}, {0x89f4, 0x00e7}, +{0x89f5, 0x0002}, {0x89f6, 0x0039}, {0x89f7, 0x00a6}, +{0x89f8, 0x0000}, {0x89f9, 0x0084}, {0x89fa, 0x0007}, +{0x89fb, 0x00e6}, {0x89fc, 0x0000}, {0x89fd, 0x00c4}, +{0x89fe, 0x0038}, {0x89ff, 0x0054}, {0x8a00, 0x0054}, +{0x8a01, 0x0054}, {0x8a02, 0x001b}, {0x8a03, 0x00a7}, +{0x8a04, 0x0000}, {0x8a05, 0x0039}, {0x8a06, 0x004a}, +{0x8a07, 0x0026}, {0x8a08, 0x00fd}, {0x8a09, 0x0039}, +{0x8a0a, 0x0096}, {0x8a0b, 0x0022}, {0x8a0c, 0x0084}, +{0x8a0d, 0x000f}, {0x8a0e, 0x0097}, {0x8a0f, 0x0022}, +{0x8a10, 0x0086}, {0x8a11, 0x0001}, {0x8a12, 0x00b7}, +{0x8a13, 0x008f}, {0x8a14, 0x0070}, {0x8a15, 0x00b6}, +{0x8a16, 0x0012}, {0x8a17, 0x0007}, {0x8a18, 0x00b7}, +{0x8a19, 0x008f}, {0x8a1a, 0x0071}, {0x8a1b, 0x00f6}, +{0x8a1c, 0x0012}, {0x8a1d, 0x000c}, {0x8a1e, 0x00c4}, +{0x8a1f, 0x000f}, {0x8a20, 0x00c8}, {0x8a21, 0x000f}, +{0x8a22, 0x00f7}, {0x8a23, 0x008f}, {0x8a24, 0x0072}, +{0x8a25, 0x00f6}, {0x8a26, 0x008f}, {0x8a27, 0x0072}, +{0x8a28, 0x00b6}, {0x8a29, 0x008f}, {0x8a2a, 0x0071}, +{0x8a2b, 0x0084}, {0x8a2c, 0x0003}, {0x8a2d, 0x0027}, +{0x8a2e, 0x0014}, {0x8a2f, 0x0081}, {0x8a30, 0x0001}, +{0x8a31, 0x0027}, {0x8a32, 0x001c}, {0x8a33, 0x0081}, +{0x8a34, 0x0002}, {0x8a35, 0x0027}, {0x8a36, 0x0024}, +{0x8a37, 0x00f4}, {0x8a38, 0x008f}, {0x8a39, 0x0070}, +{0x8a3a, 0x0027}, {0x8a3b, 0x002a}, {0x8a3c, 0x0096}, +{0x8a3d, 0x0022}, {0x8a3e, 0x008a}, {0x8a3f, 0x0080}, +{0x8a40, 0x007e}, {0x8a41, 0x008a}, {0x8a42, 0x0064}, +{0x8a43, 0x00f4}, {0x8a44, 0x008f}, {0x8a45, 0x0070}, +{0x8a46, 0x0027}, {0x8a47, 0x001e}, {0x8a48, 0x0096}, +{0x8a49, 0x0022}, {0x8a4a, 0x008a}, {0x8a4b, 0x0010}, +{0x8a4c, 0x007e}, {0x8a4d, 0x008a}, {0x8a4e, 0x0064}, +{0x8a4f, 0x00f4}, {0x8a50, 0x008f}, {0x8a51, 0x0070}, +{0x8a52, 0x0027}, {0x8a53, 0x0012}, {0x8a54, 0x0096}, +{0x8a55, 0x0022}, {0x8a56, 0x008a}, {0x8a57, 0x0020}, +{0x8a58, 0x007e}, {0x8a59, 0x008a}, {0x8a5a, 0x0064}, +{0x8a5b, 0x00f4}, {0x8a5c, 0x008f}, {0x8a5d, 0x0070}, +{0x8a5e, 0x0027}, {0x8a5f, 0x0006}, {0x8a60, 0x0096}, +{0x8a61, 0x0022}, {0x8a62, 0x008a}, {0x8a63, 0x0040}, +{0x8a64, 0x0097}, {0x8a65, 0x0022}, {0x8a66, 0x0074}, +{0x8a67, 0x008f}, {0x8a68, 0x0071}, {0x8a69, 0x0074}, +{0x8a6a, 0x008f}, {0x8a6b, 0x0071}, {0x8a6c, 0x0078}, +{0x8a6d, 0x008f}, {0x8a6e, 0x0070}, {0x8a6f, 0x00b6}, +{0x8a70, 0x008f}, {0x8a71, 0x0070}, {0x8a72, 0x0085}, +{0x8a73, 0x0010}, {0x8a74, 0x0027}, {0x8a75, 0x00af}, +{0x8a76, 0x00d6}, {0x8a77, 0x0022}, {0x8a78, 0x00c4}, +{0x8a79, 0x0010}, {0x8a7a, 0x0058}, {0x8a7b, 0x00b6}, +{0x8a7c, 0x0012}, {0x8a7d, 0x0070}, {0x8a7e, 0x0081}, +{0x8a7f, 0x00e4}, {0x8a80, 0x0027}, {0x8a81, 0x0036}, +{0x8a82, 0x0081}, {0x8a83, 0x00e1}, {0x8a84, 0x0026}, +{0x8a85, 0x000c}, {0x8a86, 0x0096}, {0x8a87, 0x0022}, +{0x8a88, 0x0084}, {0x8a89, 0x0020}, {0x8a8a, 0x0044}, +{0x8a8b, 0x001b}, {0x8a8c, 0x00d6}, {0x8a8d, 0x0022}, +{0x8a8e, 0x00c4}, {0x8a8f, 0x00cf}, {0x8a90, 0x0020}, +{0x8a91, 0x0023}, {0x8a92, 0x0058}, {0x8a93, 0x0081}, +{0x8a94, 0x00c6}, {0x8a95, 0x0026}, {0x8a96, 0x000d}, +{0x8a97, 0x0096}, {0x8a98, 0x0022}, {0x8a99, 0x0084}, +{0x8a9a, 0x0040}, {0x8a9b, 0x0044}, {0x8a9c, 0x0044}, +{0x8a9d, 0x001b}, {0x8a9e, 0x00d6}, {0x8a9f, 0x0022}, +{0x8aa0, 0x00c4}, {0x8aa1, 0x00af}, {0x8aa2, 0x0020}, +{0x8aa3, 0x0011}, {0x8aa4, 0x0058}, {0x8aa5, 0x0081}, +{0x8aa6, 0x0027}, {0x8aa7, 0x0026}, {0x8aa8, 0x000f}, +{0x8aa9, 0x0096}, {0x8aaa, 0x0022}, {0x8aab, 0x0084}, +{0x8aac, 0x0080}, {0x8aad, 0x0044}, {0x8aae, 0x0044}, +{0x8aaf, 0x0044}, {0x8ab0, 0x001b}, {0x8ab1, 0x00d6}, +{0x8ab2, 0x0022}, {0x8ab3, 0x00c4}, {0x8ab4, 0x006f}, +{0x8ab5, 0x001b}, {0x8ab6, 0x0097}, {0x8ab7, 0x0022}, +{0x8ab8, 0x0039}, {0x8ab9, 0x0027}, {0x8aba, 0x000c}, +{0x8abb, 0x007c}, {0x8abc, 0x0082}, {0x8abd, 0x0006}, +{0x8abe, 0x00bd}, {0x8abf, 0x00d9}, {0x8ac0, 0x00ed}, +{0x8ac1, 0x00b6}, {0x8ac2, 0x0082}, {0x8ac3, 0x0007}, +{0x8ac4, 0x007e}, {0x8ac5, 0x008a}, {0x8ac6, 0x00b9}, +{0x8ac7, 0x007f}, {0x8ac8, 0x0082}, {0x8ac9, 0x0006}, +{0x8aca, 0x0039}, { 0x0, 0x0 } +}; +#else +cas_saturn_patch_t cas_saturn_patch[] = { +{0x8200, 0x007e}, {0x8201, 0x0082}, {0x8202, 0x0009}, +{0x8203, 0x0000}, {0x8204, 0x0000}, {0x8205, 0x0000}, +{0x8206, 0x0000}, {0x8207, 0x0000}, {0x8208, 0x0000}, +{0x8209, 0x008e}, {0x820a, 0x008e}, {0x820b, 0x00ff}, +{0x820c, 0x00ce}, {0x820d, 0x0082}, {0x820e, 0x0025}, +{0x820f, 0x00ff}, {0x8210, 0x0001}, {0x8211, 0x000f}, +{0x8212, 0x00ce}, {0x8213, 0x0084}, {0x8214, 0x0026}, +{0x8215, 0x00ff}, {0x8216, 0x0001}, {0x8217, 0x0011}, +{0x8218, 0x00ce}, {0x8219, 0x0085}, {0x821a, 0x003d}, +{0x821b, 0x00df}, {0x821c, 0x00e5}, {0x821d, 0x0086}, +{0x821e, 0x0039}, {0x821f, 0x00b7}, {0x8220, 0x008f}, +{0x8221, 0x00f8}, {0x8222, 0x007e}, {0x8223, 0x00c3}, +{0x8224, 0x00c2}, {0x8225, 0x0096}, {0x8226, 0x0047}, +{0x8227, 0x0084}, {0x8228, 0x00f3}, {0x8229, 0x008a}, +{0x822a, 0x0000}, {0x822b, 0x0097}, {0x822c, 0x0047}, +{0x822d, 0x00ce}, {0x822e, 0x0082}, {0x822f, 0x0033}, +{0x8230, 0x00ff}, {0x8231, 0x0001}, {0x8232, 0x000f}, +{0x8233, 0x0096}, {0x8234, 0x0046}, {0x8235, 0x0084}, +{0x8236, 0x000c}, {0x8237, 0x0081}, {0x8238, 0x0004}, +{0x8239, 0x0027}, {0x823a, 0x000b}, {0x823b, 0x0096}, +{0x823c, 0x0046}, {0x823d, 0x0084}, {0x823e, 0x000c}, +{0x823f, 0x0081}, {0x8240, 0x0008}, {0x8241, 0x0027}, +{0x8242, 0x0057}, {0x8243, 0x007e}, {0x8244, 0x0084}, +{0x8245, 0x0025}, {0x8246, 0x0096}, {0x8247, 0x0047}, +{0x8248, 0x0084}, {0x8249, 0x00f3}, {0x824a, 0x008a}, +{0x824b, 0x0004}, {0x824c, 0x0097}, {0x824d, 0x0047}, +{0x824e, 0x00ce}, {0x824f, 0x0082}, {0x8250, 0x0054}, +{0x8251, 0x00ff}, {0x8252, 0x0001}, {0x8253, 0x000f}, +{0x8254, 0x0096}, {0x8255, 0x0046}, {0x8256, 0x0084}, +{0x8257, 0x000c}, {0x8258, 0x0081}, {0x8259, 0x0004}, +{0x825a, 0x0026}, {0x825b, 0x0038}, {0x825c, 0x00b6}, +{0x825d, 0x0012}, {0x825e, 0x0020}, {0x825f, 0x0084}, +{0x8260, 0x0020}, {0x8261, 0x0026}, {0x8262, 0x0003}, +{0x8263, 0x007e}, {0x8264, 0x0084}, {0x8265, 0x0025}, +{0x8266, 0x0096}, {0x8267, 0x007b}, {0x8268, 0x00d6}, +{0x8269, 0x007c}, {0x826a, 0x00fe}, {0x826b, 0x008f}, +{0x826c, 0x0056}, {0x826d, 0x00bd}, {0x826e, 0x00f7}, +{0x826f, 0x00b6}, {0x8270, 0x00fe}, {0x8271, 0x008f}, +{0x8272, 0x004e}, {0x8273, 0x00bd}, {0x8274, 0x00ec}, +{0x8275, 0x008e}, {0x8276, 0x00bd}, {0x8277, 0x00fa}, +{0x8278, 0x00f7}, {0x8279, 0x00bd}, {0x827a, 0x00f7}, +{0x827b, 0x0028}, {0x827c, 0x00ce}, {0x827d, 0x0082}, +{0x827e, 0x0082}, {0x827f, 0x00ff}, {0x8280, 0x0001}, +{0x8281, 0x000f}, {0x8282, 0x0096}, {0x8283, 0x0046}, +{0x8284, 0x0084}, {0x8285, 0x000c}, {0x8286, 0x0081}, +{0x8287, 0x0004}, {0x8288, 0x0026}, {0x8289, 0x000a}, +{0x828a, 0x00b6}, {0x828b, 0x0012}, {0x828c, 0x0020}, +{0x828d, 0x0084}, {0x828e, 0x0020}, {0x828f, 0x0027}, +{0x8290, 0x00b5}, {0x8291, 0x007e}, {0x8292, 0x0084}, +{0x8293, 0x0025}, {0x8294, 0x00bd}, {0x8295, 0x00f7}, +{0x8296, 0x001f}, {0x8297, 0x007e}, {0x8298, 0x0084}, +{0x8299, 0x001f}, {0x829a, 0x0096}, {0x829b, 0x0047}, +{0x829c, 0x0084}, {0x829d, 0x00f3}, {0x829e, 0x008a}, +{0x829f, 0x0008}, {0x82a0, 0x0097}, {0x82a1, 0x0047}, +{0x82a2, 0x00de}, {0x82a3, 0x00e1}, {0x82a4, 0x00ad}, +{0x82a5, 0x0000}, {0x82a6, 0x00ce}, {0x82a7, 0x0082}, +{0x82a8, 0x00af}, {0x82a9, 0x00ff}, {0x82aa, 0x0001}, +{0x82ab, 0x000f}, {0x82ac, 0x007e}, {0x82ad, 0x0084}, +{0x82ae, 0x0025}, {0x82af, 0x0096}, {0x82b0, 0x0041}, +{0x82b1, 0x0085}, {0x82b2, 0x0010}, {0x82b3, 0x0026}, +{0x82b4, 0x0006}, {0x82b5, 0x0096}, {0x82b6, 0x0023}, +{0x82b7, 0x0085}, {0x82b8, 0x0040}, {0x82b9, 0x0027}, +{0x82ba, 0x0006}, {0x82bb, 0x00bd}, {0x82bc, 0x00ed}, +{0x82bd, 0x0000}, {0x82be, 0x007e}, {0x82bf, 0x0083}, +{0x82c0, 0x00a2}, {0x82c1, 0x00de}, {0x82c2, 0x0042}, +{0x82c3, 0x00bd}, {0x82c4, 0x00eb}, {0x82c5, 0x008e}, +{0x82c6, 0x0096}, {0x82c7, 0x0024}, {0x82c8, 0x0084}, +{0x82c9, 0x0008}, {0x82ca, 0x0027}, {0x82cb, 0x0003}, +{0x82cc, 0x007e}, {0x82cd, 0x0083}, {0x82ce, 0x00df}, +{0x82cf, 0x0096}, {0x82d0, 0x007b}, {0x82d1, 0x00d6}, +{0x82d2, 0x007c}, {0x82d3, 0x00fe}, {0x82d4, 0x008f}, +{0x82d5, 0x0056}, {0x82d6, 0x00bd}, {0x82d7, 0x00f7}, +{0x82d8, 0x00b6}, {0x82d9, 0x00fe}, {0x82da, 0x008f}, +{0x82db, 0x0050}, {0x82dc, 0x00bd}, {0x82dd, 0x00ec}, +{0x82de, 0x008e}, {0x82df, 0x00bd}, {0x82e0, 0x00fa}, +{0x82e1, 0x00f7}, {0x82e2, 0x0086}, {0x82e3, 0x0011}, +{0x82e4, 0x00c6}, {0x82e5, 0x0049}, {0x82e6, 0x00bd}, +{0x82e7, 0x00e4}, {0x82e8, 0x0012}, {0x82e9, 0x00ce}, +{0x82ea, 0x0082}, {0x82eb, 0x00ef}, {0x82ec, 0x00ff}, +{0x82ed, 0x0001}, {0x82ee, 0x000f}, {0x82ef, 0x0096}, +{0x82f0, 0x0046}, {0x82f1, 0x0084}, {0x82f2, 0x000c}, +{0x82f3, 0x0081}, {0x82f4, 0x0000}, {0x82f5, 0x0027}, +{0x82f6, 0x0017}, {0x82f7, 0x00c6}, {0x82f8, 0x0049}, +{0x82f9, 0x00bd}, {0x82fa, 0x00e4}, {0x82fb, 0x0091}, +{0x82fc, 0x0024}, {0x82fd, 0x000d}, {0x82fe, 0x00b6}, +{0x82ff, 0x0012}, {0x8300, 0x0020}, {0x8301, 0x0085}, +{0x8302, 0x0020}, {0x8303, 0x0026}, {0x8304, 0x000c}, +{0x8305, 0x00ce}, {0x8306, 0x0082}, {0x8307, 0x00c1}, +{0x8308, 0x00ff}, {0x8309, 0x0001}, {0x830a, 0x000f}, +{0x830b, 0x007e}, {0x830c, 0x0084}, {0x830d, 0x0025}, +{0x830e, 0x007e}, {0x830f, 0x0084}, {0x8310, 0x0016}, +{0x8311, 0x00fe}, {0x8312, 0x008f}, {0x8313, 0x0052}, +{0x8314, 0x00bd}, {0x8315, 0x00ec}, {0x8316, 0x008e}, +{0x8317, 0x00bd}, {0x8318, 0x00fa}, {0x8319, 0x00f7}, +{0x831a, 0x0086}, {0x831b, 0x006a}, {0x831c, 0x00c6}, +{0x831d, 0x0049}, {0x831e, 0x00bd}, {0x831f, 0x00e4}, +{0x8320, 0x0012}, {0x8321, 0x00ce}, {0x8322, 0x0083}, +{0x8323, 0x0027}, {0x8324, 0x00ff}, {0x8325, 0x0001}, +{0x8326, 0x000f}, {0x8327, 0x0096}, {0x8328, 0x0046}, +{0x8329, 0x0084}, {0x832a, 0x000c}, {0x832b, 0x0081}, +{0x832c, 0x0000}, {0x832d, 0x0027}, {0x832e, 0x000a}, +{0x832f, 0x00c6}, {0x8330, 0x0049}, {0x8331, 0x00bd}, +{0x8332, 0x00e4}, {0x8333, 0x0091}, {0x8334, 0x0025}, +{0x8335, 0x0006}, {0x8336, 0x007e}, {0x8337, 0x0084}, +{0x8338, 0x0025}, {0x8339, 0x007e}, {0x833a, 0x0084}, +{0x833b, 0x0016}, {0x833c, 0x00b6}, {0x833d, 0x0018}, +{0x833e, 0x0070}, {0x833f, 0x00bb}, {0x8340, 0x0019}, +{0x8341, 0x0070}, {0x8342, 0x002a}, {0x8343, 0x0004}, +{0x8344, 0x0081}, {0x8345, 0x00af}, {0x8346, 0x002e}, +{0x8347, 0x0019}, {0x8348, 0x0096}, {0x8349, 0x007b}, +{0x834a, 0x00f6}, {0x834b, 0x0020}, {0x834c, 0x0007}, +{0x834d, 0x00fa}, {0x834e, 0x0020}, {0x834f, 0x0027}, +{0x8350, 0x00c4}, {0x8351, 0x0038}, {0x8352, 0x0081}, +{0x8353, 0x0038}, {0x8354, 0x0027}, {0x8355, 0x000b}, +{0x8356, 0x00f6}, {0x8357, 0x0020}, {0x8358, 0x0007}, +{0x8359, 0x00fa}, {0x835a, 0x0020}, {0x835b, 0x0027}, +{0x835c, 0x00cb}, {0x835d, 0x0008}, {0x835e, 0x007e}, +{0x835f, 0x0082}, {0x8360, 0x00d3}, {0x8361, 0x00bd}, +{0x8362, 0x00f7}, {0x8363, 0x0066}, {0x8364, 0x0086}, +{0x8365, 0x0074}, {0x8366, 0x00c6}, {0x8367, 0x0049}, +{0x8368, 0x00bd}, {0x8369, 0x00e4}, {0x836a, 0x0012}, +{0x836b, 0x00ce}, {0x836c, 0x0083}, {0x836d, 0x0071}, +{0x836e, 0x00ff}, {0x836f, 0x0001}, {0x8370, 0x000f}, +{0x8371, 0x0096}, {0x8372, 0x0046}, {0x8373, 0x0084}, +{0x8374, 0x000c}, {0x8375, 0x0081}, {0x8376, 0x0008}, +{0x8377, 0x0026}, {0x8378, 0x000a}, {0x8379, 0x00c6}, +{0x837a, 0x0049}, {0x837b, 0x00bd}, {0x837c, 0x00e4}, +{0x837d, 0x0091}, {0x837e, 0x0025}, {0x837f, 0x0006}, +{0x8380, 0x007e}, {0x8381, 0x0084}, {0x8382, 0x0025}, +{0x8383, 0x007e}, {0x8384, 0x0084}, {0x8385, 0x0016}, +{0x8386, 0x00bd}, {0x8387, 0x00f7}, {0x8388, 0x003e}, +{0x8389, 0x0026}, {0x838a, 0x000e}, {0x838b, 0x00bd}, +{0x838c, 0x00e5}, {0x838d, 0x0009}, {0x838e, 0x0026}, +{0x838f, 0x0006}, {0x8390, 0x00ce}, {0x8391, 0x0082}, +{0x8392, 0x00c1}, {0x8393, 0x00ff}, {0x8394, 0x0001}, +{0x8395, 0x000f}, {0x8396, 0x007e}, {0x8397, 0x0084}, +{0x8398, 0x0025}, {0x8399, 0x00fe}, {0x839a, 0x008f}, +{0x839b, 0x0054}, {0x839c, 0x00bd}, {0x839d, 0x00ec}, +{0x839e, 0x008e}, {0x839f, 0x00bd}, {0x83a0, 0x00fa}, +{0x83a1, 0x00f7}, {0x83a2, 0x00bd}, {0x83a3, 0x00f7}, +{0x83a4, 0x0033}, {0x83a5, 0x0086}, {0x83a6, 0x000f}, +{0x83a7, 0x00c6}, {0x83a8, 0x0051}, {0x83a9, 0x00bd}, +{0x83aa, 0x00e4}, {0x83ab, 0x0012}, {0x83ac, 0x00ce}, +{0x83ad, 0x0083}, {0x83ae, 0x00b2}, {0x83af, 0x00ff}, +{0x83b0, 0x0001}, {0x83b1, 0x000f}, {0x83b2, 0x0096}, +{0x83b3, 0x0046}, {0x83b4, 0x0084}, {0x83b5, 0x000c}, +{0x83b6, 0x0081}, {0x83b7, 0x0008}, {0x83b8, 0x0026}, +{0x83b9, 0x005c}, {0x83ba, 0x00b6}, {0x83bb, 0x0012}, +{0x83bc, 0x0020}, {0x83bd, 0x0084}, {0x83be, 0x003f}, +{0x83bf, 0x0081}, {0x83c0, 0x003a}, {0x83c1, 0x0027}, +{0x83c2, 0x001c}, {0x83c3, 0x0096}, {0x83c4, 0x0023}, +{0x83c5, 0x0085}, {0x83c6, 0x0040}, {0x83c7, 0x0027}, +{0x83c8, 0x0003}, {0x83c9, 0x007e}, {0x83ca, 0x0084}, +{0x83cb, 0x0025}, {0x83cc, 0x00c6}, {0x83cd, 0x0051}, +{0x83ce, 0x00bd}, {0x83cf, 0x00e4}, {0x83d0, 0x0091}, +{0x83d1, 0x0025}, {0x83d2, 0x0003}, {0x83d3, 0x007e}, +{0x83d4, 0x0084}, {0x83d5, 0x0025}, {0x83d6, 0x00ce}, +{0x83d7, 0x0082}, {0x83d8, 0x00c1}, {0x83d9, 0x00ff}, +{0x83da, 0x0001}, {0x83db, 0x000f}, {0x83dc, 0x007e}, +{0x83dd, 0x0084}, {0x83de, 0x0025}, {0x83df, 0x00bd}, +{0x83e0, 0x00f8}, {0x83e1, 0x0037}, {0x83e2, 0x007c}, +{0x83e3, 0x0000}, {0x83e4, 0x007a}, {0x83e5, 0x00ce}, +{0x83e6, 0x0083}, {0x83e7, 0x00ee}, {0x83e8, 0x00ff}, +{0x83e9, 0x0001}, {0x83ea, 0x000f}, {0x83eb, 0x007e}, +{0x83ec, 0x0084}, {0x83ed, 0x0025}, {0x83ee, 0x0096}, +{0x83ef, 0x0046}, {0x83f0, 0x0084}, {0x83f1, 0x000c}, +{0x83f2, 0x0081}, {0x83f3, 0x0008}, {0x83f4, 0x0026}, +{0x83f5, 0x0020}, {0x83f6, 0x0096}, {0x83f7, 0x0024}, +{0x83f8, 0x0084}, {0x83f9, 0x0008}, {0x83fa, 0x0026}, +{0x83fb, 0x0029}, {0x83fc, 0x00b6}, {0x83fd, 0x0018}, +{0x83fe, 0x0082}, {0x83ff, 0x00bb}, {0x8400, 0x0019}, +{0x8401, 0x0082}, {0x8402, 0x00b1}, {0x8403, 0x0001}, +{0x8404, 0x003b}, {0x8405, 0x0022}, {0x8406, 0x0009}, +{0x8407, 0x00b6}, {0x8408, 0x0012}, {0x8409, 0x0020}, +{0x840a, 0x0084}, {0x840b, 0x0037}, {0x840c, 0x0081}, +{0x840d, 0x0032}, {0x840e, 0x0027}, {0x840f, 0x0015}, +{0x8410, 0x00bd}, {0x8411, 0x00f8}, {0x8412, 0x0044}, +{0x8413, 0x007e}, {0x8414, 0x0082}, {0x8415, 0x00c1}, +{0x8416, 0x00bd}, {0x8417, 0x00f7}, {0x8418, 0x001f}, +{0x8419, 0x00bd}, {0x841a, 0x00f8}, {0x841b, 0x0044}, +{0x841c, 0x00bd}, {0x841d, 0x00fc}, {0x841e, 0x0029}, +{0x841f, 0x00ce}, {0x8420, 0x0082}, {0x8421, 0x0025}, +{0x8422, 0x00ff}, {0x8423, 0x0001}, {0x8424, 0x000f}, +{0x8425, 0x0039}, {0x8426, 0x0096}, {0x8427, 0x0047}, +{0x8428, 0x0084}, {0x8429, 0x00fc}, {0x842a, 0x008a}, +{0x842b, 0x0000}, {0x842c, 0x0097}, {0x842d, 0x0047}, +{0x842e, 0x00ce}, {0x842f, 0x0084}, {0x8430, 0x0034}, +{0x8431, 0x00ff}, {0x8432, 0x0001}, {0x8433, 0x0011}, +{0x8434, 0x0096}, {0x8435, 0x0046}, {0x8436, 0x0084}, +{0x8437, 0x0003}, {0x8438, 0x0081}, {0x8439, 0x0002}, +{0x843a, 0x0027}, {0x843b, 0x0003}, {0x843c, 0x007e}, +{0x843d, 0x0085}, {0x843e, 0x001e}, {0x843f, 0x0096}, +{0x8440, 0x0047}, {0x8441, 0x0084}, {0x8442, 0x00fc}, +{0x8443, 0x008a}, {0x8444, 0x0002}, {0x8445, 0x0097}, +{0x8446, 0x0047}, {0x8447, 0x00de}, {0x8448, 0x00e1}, +{0x8449, 0x00ad}, {0x844a, 0x0000}, {0x844b, 0x0086}, +{0x844c, 0x0001}, {0x844d, 0x00b7}, {0x844e, 0x0012}, +{0x844f, 0x0051}, {0x8450, 0x00bd}, {0x8451, 0x00f7}, +{0x8452, 0x0014}, {0x8453, 0x00b6}, {0x8454, 0x0010}, +{0x8455, 0x0031}, {0x8456, 0x0084}, {0x8457, 0x00fd}, +{0x8458, 0x00b7}, {0x8459, 0x0010}, {0x845a, 0x0031}, +{0x845b, 0x00bd}, {0x845c, 0x00f8}, {0x845d, 0x001e}, +{0x845e, 0x0096}, {0x845f, 0x0081}, {0x8460, 0x00d6}, +{0x8461, 0x0082}, {0x8462, 0x00fe}, {0x8463, 0x008f}, +{0x8464, 0x005a}, {0x8465, 0x00bd}, {0x8466, 0x00f7}, +{0x8467, 0x00b6}, {0x8468, 0x00fe}, {0x8469, 0x008f}, +{0x846a, 0x005c}, {0x846b, 0x00bd}, {0x846c, 0x00ec}, +{0x846d, 0x008e}, {0x846e, 0x00bd}, {0x846f, 0x00fa}, +{0x8470, 0x00f7}, {0x8471, 0x0086}, {0x8472, 0x0008}, +{0x8473, 0x00d6}, {0x8474, 0x0000}, {0x8475, 0x00c5}, +{0x8476, 0x0010}, {0x8477, 0x0026}, {0x8478, 0x0002}, +{0x8479, 0x008b}, {0x847a, 0x0020}, {0x847b, 0x00c6}, +{0x847c, 0x0051}, {0x847d, 0x00bd}, {0x847e, 0x00e4}, +{0x847f, 0x0012}, {0x8480, 0x00ce}, {0x8481, 0x0084}, +{0x8482, 0x0086}, {0x8483, 0x00ff}, {0x8484, 0x0001}, +{0x8485, 0x0011}, {0x8486, 0x0096}, {0x8487, 0x0046}, +{0x8488, 0x0084}, {0x8489, 0x0003}, {0x848a, 0x0081}, +{0x848b, 0x0002}, {0x848c, 0x0027}, {0x848d, 0x0003}, +{0x848e, 0x007e}, {0x848f, 0x0085}, {0x8490, 0x000f}, +{0x8491, 0x00c6}, {0x8492, 0x0051}, {0x8493, 0x00bd}, +{0x8494, 0x00e4}, {0x8495, 0x0091}, {0x8496, 0x0025}, +{0x8497, 0x0003}, {0x8498, 0x007e}, {0x8499, 0x0085}, +{0x849a, 0x001e}, {0x849b, 0x0096}, {0x849c, 0x0044}, +{0x849d, 0x0085}, {0x849e, 0x0010}, {0x849f, 0x0026}, +{0x84a0, 0x000a}, {0x84a1, 0x00b6}, {0x84a2, 0x0012}, +{0x84a3, 0x0050}, {0x84a4, 0x00ba}, {0x84a5, 0x0001}, +{0x84a6, 0x003c}, {0x84a7, 0x0085}, {0x84a8, 0x0010}, +{0x84a9, 0x0027}, {0x84aa, 0x00a8}, {0x84ab, 0x00bd}, +{0x84ac, 0x00f7}, {0x84ad, 0x0066}, {0x84ae, 0x00ce}, +{0x84af, 0x0084}, {0x84b0, 0x00b7}, {0x84b1, 0x00ff}, +{0x84b2, 0x0001}, {0x84b3, 0x0011}, {0x84b4, 0x007e}, +{0x84b5, 0x0085}, {0x84b6, 0x001e}, {0x84b7, 0x0096}, +{0x84b8, 0x0046}, {0x84b9, 0x0084}, {0x84ba, 0x0003}, +{0x84bb, 0x0081}, {0x84bc, 0x0002}, {0x84bd, 0x0026}, +{0x84be, 0x0050}, {0x84bf, 0x00b6}, {0x84c0, 0x0012}, +{0x84c1, 0x0030}, {0x84c2, 0x0084}, {0x84c3, 0x0003}, +{0x84c4, 0x0081}, {0x84c5, 0x0001}, {0x84c6, 0x0027}, +{0x84c7, 0x0003}, {0x84c8, 0x007e}, {0x84c9, 0x0085}, +{0x84ca, 0x001e}, {0x84cb, 0x0096}, {0x84cc, 0x0044}, +{0x84cd, 0x0085}, {0x84ce, 0x0010}, {0x84cf, 0x0026}, +{0x84d0, 0x0013}, {0x84d1, 0x00b6}, {0x84d2, 0x0012}, +{0x84d3, 0x0050}, {0x84d4, 0x00ba}, {0x84d5, 0x0001}, +{0x84d6, 0x003c}, {0x84d7, 0x0085}, {0x84d8, 0x0010}, +{0x84d9, 0x0026}, {0x84da, 0x0009}, {0x84db, 0x00ce}, +{0x84dc, 0x0084}, {0x84dd, 0x0053}, {0x84de, 0x00ff}, +{0x84df, 0x0001}, {0x84e0, 0x0011}, {0x84e1, 0x007e}, +{0x84e2, 0x0085}, {0x84e3, 0x001e}, {0x84e4, 0x00b6}, +{0x84e5, 0x0010}, {0x84e6, 0x0031}, {0x84e7, 0x008a}, +{0x84e8, 0x0002}, {0x84e9, 0x00b7}, {0x84ea, 0x0010}, +{0x84eb, 0x0031}, {0x84ec, 0x00bd}, {0x84ed, 0x0085}, +{0x84ee, 0x001f}, {0x84ef, 0x00bd}, {0x84f0, 0x00f8}, +{0x84f1, 0x0037}, {0x84f2, 0x007c}, {0x84f3, 0x0000}, +{0x84f4, 0x0080}, {0x84f5, 0x00ce}, {0x84f6, 0x0084}, +{0x84f7, 0x00fe}, {0x84f8, 0x00ff}, {0x84f9, 0x0001}, +{0x84fa, 0x0011}, {0x84fb, 0x007e}, {0x84fc, 0x0085}, +{0x84fd, 0x001e}, {0x84fe, 0x0096}, {0x84ff, 0x0046}, +{0x8500, 0x0084}, {0x8501, 0x0003}, {0x8502, 0x0081}, +{0x8503, 0x0002}, {0x8504, 0x0026}, {0x8505, 0x0009}, +{0x8506, 0x00b6}, {0x8507, 0x0012}, {0x8508, 0x0030}, +{0x8509, 0x0084}, {0x850a, 0x0003}, {0x850b, 0x0081}, +{0x850c, 0x0001}, {0x850d, 0x0027}, {0x850e, 0x000f}, +{0x850f, 0x00bd}, {0x8510, 0x00f8}, {0x8511, 0x0044}, +{0x8512, 0x00bd}, {0x8513, 0x00f7}, {0x8514, 0x000b}, +{0x8515, 0x00bd}, {0x8516, 0x00fc}, {0x8517, 0x0029}, +{0x8518, 0x00ce}, {0x8519, 0x0084}, {0x851a, 0x0026}, +{0x851b, 0x00ff}, {0x851c, 0x0001}, {0x851d, 0x0011}, +{0x851e, 0x0039}, {0x851f, 0x00d6}, {0x8520, 0x0022}, +{0x8521, 0x00c4}, {0x8522, 0x000f}, {0x8523, 0x00b6}, +{0x8524, 0x0012}, {0x8525, 0x0030}, {0x8526, 0x00ba}, +{0x8527, 0x0012}, {0x8528, 0x0032}, {0x8529, 0x0084}, +{0x852a, 0x0004}, {0x852b, 0x0027}, {0x852c, 0x000d}, +{0x852d, 0x0096}, {0x852e, 0x0022}, {0x852f, 0x0085}, +{0x8530, 0x0004}, {0x8531, 0x0027}, {0x8532, 0x0005}, +{0x8533, 0x00ca}, {0x8534, 0x0010}, {0x8535, 0x007e}, +{0x8536, 0x0085}, {0x8537, 0x003a}, {0x8538, 0x00ca}, +{0x8539, 0x0020}, {0x853a, 0x00d7}, {0x853b, 0x0022}, +{0x853c, 0x0039}, {0x853d, 0x0086}, {0x853e, 0x0000}, +{0x853f, 0x0097}, {0x8540, 0x0083}, {0x8541, 0x0018}, +{0x8542, 0x00ce}, {0x8543, 0x001c}, {0x8544, 0x0000}, +{0x8545, 0x00bd}, {0x8546, 0x00eb}, {0x8547, 0x0046}, +{0x8548, 0x0096}, {0x8549, 0x0057}, {0x854a, 0x0085}, +{0x854b, 0x0001}, {0x854c, 0x0027}, {0x854d, 0x0002}, +{0x854e, 0x004f}, {0x854f, 0x0039}, {0x8550, 0x0085}, +{0x8551, 0x0002}, {0x8552, 0x0027}, {0x8553, 0x0001}, +{0x8554, 0x0039}, {0x8555, 0x007f}, {0x8556, 0x008f}, +{0x8557, 0x007d}, {0x8558, 0x0086}, {0x8559, 0x0004}, +{0x855a, 0x00b7}, {0x855b, 0x0012}, {0x855c, 0x0004}, +{0x855d, 0x0086}, {0x855e, 0x0008}, {0x855f, 0x00b7}, +{0x8560, 0x0012}, {0x8561, 0x0007}, {0x8562, 0x0086}, +{0x8563, 0x0010}, {0x8564, 0x00b7}, {0x8565, 0x0012}, +{0x8566, 0x000c}, {0x8567, 0x0086}, {0x8568, 0x0007}, +{0x8569, 0x00b7}, {0x856a, 0x0012}, {0x856b, 0x0006}, +{0x856c, 0x00b6}, {0x856d, 0x008f}, {0x856e, 0x007d}, +{0x856f, 0x00b7}, {0x8570, 0x0012}, {0x8571, 0x0070}, +{0x8572, 0x0086}, {0x8573, 0x0001}, {0x8574, 0x00ba}, +{0x8575, 0x0012}, {0x8576, 0x0004}, {0x8577, 0x00b7}, +{0x8578, 0x0012}, {0x8579, 0x0004}, {0x857a, 0x0001}, +{0x857b, 0x0001}, {0x857c, 0x0001}, {0x857d, 0x0001}, +{0x857e, 0x0001}, {0x857f, 0x0001}, {0x8580, 0x00b6}, +{0x8581, 0x0012}, {0x8582, 0x0004}, {0x8583, 0x0084}, +{0x8584, 0x00fe}, {0x8585, 0x008a}, {0x8586, 0x0002}, +{0x8587, 0x00b7}, {0x8588, 0x0012}, {0x8589, 0x0004}, +{0x858a, 0x0001}, {0x858b, 0x0001}, {0x858c, 0x0001}, +{0x858d, 0x0001}, {0x858e, 0x0001}, {0x858f, 0x0001}, +{0x8590, 0x0086}, {0x8591, 0x00fd}, {0x8592, 0x00b4}, +{0x8593, 0x0012}, {0x8594, 0x0004}, {0x8595, 0x00b7}, +{0x8596, 0x0012}, {0x8597, 0x0004}, {0x8598, 0x00b6}, +{0x8599, 0x0012}, {0x859a, 0x0000}, {0x859b, 0x0084}, +{0x859c, 0x0008}, {0x859d, 0x0081}, {0x859e, 0x0008}, +{0x859f, 0x0027}, {0x85a0, 0x0016}, {0x85a1, 0x00b6}, +{0x85a2, 0x008f}, {0x85a3, 0x007d}, {0x85a4, 0x0081}, +{0x85a5, 0x000c}, {0x85a6, 0x0027}, {0x85a7, 0x0008}, +{0x85a8, 0x008b}, {0x85a9, 0x0004}, {0x85aa, 0x00b7}, +{0x85ab, 0x008f}, {0x85ac, 0x007d}, {0x85ad, 0x007e}, +{0x85ae, 0x0085}, {0x85af, 0x006c}, {0x85b0, 0x0086}, +{0x85b1, 0x0003}, {0x85b2, 0x0097}, {0x85b3, 0x0040}, +{0x85b4, 0x007e}, {0x85b5, 0x0089}, {0x85b6, 0x006e}, +{0x85b7, 0x0086}, {0x85b8, 0x0007}, {0x85b9, 0x00b7}, +{0x85ba, 0x0012}, {0x85bb, 0x0006}, {0x85bc, 0x005f}, +{0x85bd, 0x00f7}, {0x85be, 0x008f}, {0x85bf, 0x0082}, +{0x85c0, 0x005f}, {0x85c1, 0x00f7}, {0x85c2, 0x008f}, +{0x85c3, 0x007f}, {0x85c4, 0x00f7}, {0x85c5, 0x008f}, +{0x85c6, 0x0070}, {0x85c7, 0x00f7}, {0x85c8, 0x008f}, +{0x85c9, 0x0071}, {0x85ca, 0x00f7}, {0x85cb, 0x008f}, +{0x85cc, 0x0072}, {0x85cd, 0x00f7}, {0x85ce, 0x008f}, +{0x85cf, 0x0073}, {0x85d0, 0x00f7}, {0x85d1, 0x008f}, +{0x85d2, 0x0074}, {0x85d3, 0x00f7}, {0x85d4, 0x008f}, +{0x85d5, 0x0075}, {0x85d6, 0x00f7}, {0x85d7, 0x008f}, +{0x85d8, 0x0076}, {0x85d9, 0x00f7}, {0x85da, 0x008f}, +{0x85db, 0x0077}, {0x85dc, 0x00f7}, {0x85dd, 0x008f}, +{0x85de, 0x0078}, {0x85df, 0x00f7}, {0x85e0, 0x008f}, +{0x85e1, 0x0079}, {0x85e2, 0x00f7}, {0x85e3, 0x008f}, +{0x85e4, 0x007a}, {0x85e5, 0x00f7}, {0x85e6, 0x008f}, +{0x85e7, 0x007b}, {0x85e8, 0x00b6}, {0x85e9, 0x0012}, +{0x85ea, 0x0004}, {0x85eb, 0x008a}, {0x85ec, 0x0010}, +{0x85ed, 0x00b7}, {0x85ee, 0x0012}, {0x85ef, 0x0004}, +{0x85f0, 0x0086}, {0x85f1, 0x00e4}, {0x85f2, 0x00b7}, +{0x85f3, 0x0012}, {0x85f4, 0x0070}, {0x85f5, 0x00b7}, +{0x85f6, 0x0012}, {0x85f7, 0x0007}, {0x85f8, 0x00f7}, +{0x85f9, 0x0012}, {0x85fa, 0x0005}, {0x85fb, 0x00f7}, +{0x85fc, 0x0012}, {0x85fd, 0x0009}, {0x85fe, 0x0086}, +{0x85ff, 0x0008}, {0x8600, 0x00ba}, {0x8601, 0x0012}, +{0x8602, 0x0004}, {0x8603, 0x00b7}, {0x8604, 0x0012}, +{0x8605, 0x0004}, {0x8606, 0x0086}, {0x8607, 0x00f7}, +{0x8608, 0x00b4}, {0x8609, 0x0012}, {0x860a, 0x0004}, +{0x860b, 0x00b7}, {0x860c, 0x0012}, {0x860d, 0x0004}, +{0x860e, 0x0001}, {0x860f, 0x0001}, {0x8610, 0x0001}, +{0x8611, 0x0001}, {0x8612, 0x0001}, {0x8613, 0x0001}, +{0x8614, 0x00b6}, {0x8615, 0x0012}, {0x8616, 0x0008}, +{0x8617, 0x0027}, {0x8618, 0x007f}, {0x8619, 0x0081}, +{0x861a, 0x0080}, {0x861b, 0x0026}, {0x861c, 0x000b}, +{0x861d, 0x0086}, {0x861e, 0x0008}, {0x861f, 0x00ce}, +{0x8620, 0x008f}, {0x8621, 0x0079}, {0x8622, 0x00bd}, +{0x8623, 0x0089}, {0x8624, 0x007b}, {0x8625, 0x007e}, +{0x8626, 0x0086}, {0x8627, 0x008e}, {0x8628, 0x0081}, +{0x8629, 0x0040}, {0x862a, 0x0026}, {0x862b, 0x000b}, +{0x862c, 0x0086}, {0x862d, 0x0004}, {0x862e, 0x00ce}, +{0x862f, 0x008f}, {0x8630, 0x0076}, {0x8631, 0x00bd}, +{0x8632, 0x0089}, {0x8633, 0x007b}, {0x8634, 0x007e}, +{0x8635, 0x0086}, {0x8636, 0x008e}, {0x8637, 0x0081}, +{0x8638, 0x0020}, {0x8639, 0x0026}, {0x863a, 0x000b}, +{0x863b, 0x0086}, {0x863c, 0x0002}, {0x863d, 0x00ce}, +{0x863e, 0x008f}, {0x863f, 0x0073}, {0x8640, 0x00bd}, +{0x8641, 0x0089}, {0x8642, 0x007b}, {0x8643, 0x007e}, +{0x8644, 0x0086}, {0x8645, 0x008e}, {0x8646, 0x0081}, +{0x8647, 0x0010}, {0x8648, 0x0026}, {0x8649, 0x000b}, +{0x864a, 0x0086}, {0x864b, 0x0001}, {0x864c, 0x00ce}, +{0x864d, 0x008f}, {0x864e, 0x0070}, {0x864f, 0x00bd}, +{0x8650, 0x0089}, {0x8651, 0x007b}, {0x8652, 0x007e}, +{0x8653, 0x0086}, {0x8654, 0x008e}, {0x8655, 0x0081}, +{0x8656, 0x0008}, {0x8657, 0x0026}, {0x8658, 0x000b}, +{0x8659, 0x0086}, {0x865a, 0x0008}, {0x865b, 0x00ce}, +{0x865c, 0x008f}, {0x865d, 0x0079}, {0x865e, 0x00bd}, +{0x865f, 0x0089}, {0x8660, 0x007f}, {0x8661, 0x007e}, +{0x8662, 0x0086}, {0x8663, 0x008e}, {0x8664, 0x0081}, +{0x8665, 0x0004}, {0x8666, 0x0026}, {0x8667, 0x000b}, +{0x8668, 0x0086}, {0x8669, 0x0004}, {0x866a, 0x00ce}, +{0x866b, 0x008f}, {0x866c, 0x0076}, {0x866d, 0x00bd}, +{0x866e, 0x0089}, {0x866f, 0x007f}, {0x8670, 0x007e}, +{0x8671, 0x0086}, {0x8672, 0x008e}, {0x8673, 0x0081}, +{0x8674, 0x0002}, {0x8675, 0x0026}, {0x8676, 0x000b}, +{0x8677, 0x008a}, {0x8678, 0x0002}, {0x8679, 0x00ce}, +{0x867a, 0x008f}, {0x867b, 0x0073}, {0x867c, 0x00bd}, +{0x867d, 0x0089}, {0x867e, 0x007f}, {0x867f, 0x007e}, +{0x8680, 0x0086}, {0x8681, 0x008e}, {0x8682, 0x0081}, +{0x8683, 0x0001}, {0x8684, 0x0026}, {0x8685, 0x0008}, +{0x8686, 0x0086}, {0x8687, 0x0001}, {0x8688, 0x00ce}, +{0x8689, 0x008f}, {0x868a, 0x0070}, {0x868b, 0x00bd}, +{0x868c, 0x0089}, {0x868d, 0x007f}, {0x868e, 0x00b6}, +{0x868f, 0x008f}, {0x8690, 0x007f}, {0x8691, 0x0081}, +{0x8692, 0x000f}, {0x8693, 0x0026}, {0x8694, 0x0003}, +{0x8695, 0x007e}, {0x8696, 0x0087}, {0x8697, 0x0047}, +{0x8698, 0x00b6}, {0x8699, 0x0012}, {0x869a, 0x0009}, +{0x869b, 0x0084}, {0x869c, 0x0003}, {0x869d, 0x0081}, +{0x869e, 0x0003}, {0x869f, 0x0027}, {0x86a0, 0x0006}, +{0x86a1, 0x007c}, {0x86a2, 0x0012}, {0x86a3, 0x0009}, +{0x86a4, 0x007e}, {0x86a5, 0x0085}, {0x86a6, 0x00fe}, +{0x86a7, 0x00b6}, {0x86a8, 0x0012}, {0x86a9, 0x0006}, +{0x86aa, 0x0084}, {0x86ab, 0x0007}, {0x86ac, 0x0081}, +{0x86ad, 0x0007}, {0x86ae, 0x0027}, {0x86af, 0x0008}, +{0x86b0, 0x008b}, {0x86b1, 0x0001}, {0x86b2, 0x00b7}, +{0x86b3, 0x0012}, {0x86b4, 0x0006}, {0x86b5, 0x007e}, +{0x86b6, 0x0086}, {0x86b7, 0x00d5}, {0x86b8, 0x00b6}, +{0x86b9, 0x008f}, {0x86ba, 0x0082}, {0x86bb, 0x0026}, +{0x86bc, 0x000a}, {0x86bd, 0x007c}, {0x86be, 0x008f}, +{0x86bf, 0x0082}, {0x86c0, 0x004f}, {0x86c1, 0x00b7}, +{0x86c2, 0x0012}, {0x86c3, 0x0006}, {0x86c4, 0x007e}, +{0x86c5, 0x0085}, {0x86c6, 0x00c0}, {0x86c7, 0x00b6}, +{0x86c8, 0x0012}, {0x86c9, 0x0006}, {0x86ca, 0x0084}, +{0x86cb, 0x003f}, {0x86cc, 0x0081}, {0x86cd, 0x003f}, +{0x86ce, 0x0027}, {0x86cf, 0x0010}, {0x86d0, 0x008b}, +{0x86d1, 0x0008}, {0x86d2, 0x00b7}, {0x86d3, 0x0012}, +{0x86d4, 0x0006}, {0x86d5, 0x00b6}, {0x86d6, 0x0012}, +{0x86d7, 0x0009}, {0x86d8, 0x0084}, {0x86d9, 0x00fc}, +{0x86da, 0x00b7}, {0x86db, 0x0012}, {0x86dc, 0x0009}, +{0x86dd, 0x007e}, {0x86de, 0x0085}, {0x86df, 0x00fe}, +{0x86e0, 0x00ce}, {0x86e1, 0x008f}, {0x86e2, 0x0070}, +{0x86e3, 0x0018}, {0x86e4, 0x00ce}, {0x86e5, 0x008f}, +{0x86e6, 0x0084}, {0x86e7, 0x00c6}, {0x86e8, 0x000c}, +{0x86e9, 0x00bd}, {0x86ea, 0x0089}, {0x86eb, 0x006f}, +{0x86ec, 0x00ce}, {0x86ed, 0x008f}, {0x86ee, 0x0084}, +{0x86ef, 0x0018}, {0x86f0, 0x00ce}, {0x86f1, 0x008f}, +{0x86f2, 0x0070}, {0x86f3, 0x00c6}, {0x86f4, 0x000c}, +{0x86f5, 0x00bd}, {0x86f6, 0x0089}, {0x86f7, 0x006f}, +{0x86f8, 0x00d6}, {0x86f9, 0x0083}, {0x86fa, 0x00c1}, +{0x86fb, 0x004f}, {0x86fc, 0x002d}, {0x86fd, 0x0003}, +{0x86fe, 0x007e}, {0x86ff, 0x0087}, {0x8700, 0x0040}, +{0x8701, 0x00b6}, {0x8702, 0x008f}, {0x8703, 0x007f}, +{0x8704, 0x0081}, {0x8705, 0x0007}, {0x8706, 0x0027}, +{0x8707, 0x000f}, {0x8708, 0x0081}, {0x8709, 0x000b}, +{0x870a, 0x0027}, {0x870b, 0x0015}, {0x870c, 0x0081}, +{0x870d, 0x000d}, {0x870e, 0x0027}, {0x870f, 0x001b}, +{0x8710, 0x0081}, {0x8711, 0x000e}, {0x8712, 0x0027}, +{0x8713, 0x0021}, {0x8714, 0x007e}, {0x8715, 0x0087}, +{0x8716, 0x0040}, {0x8717, 0x00f7}, {0x8718, 0x008f}, +{0x8719, 0x007b}, {0x871a, 0x0086}, {0x871b, 0x0002}, +{0x871c, 0x00b7}, {0x871d, 0x008f}, {0x871e, 0x007a}, +{0x871f, 0x0020}, {0x8720, 0x001c}, {0x8721, 0x00f7}, +{0x8722, 0x008f}, {0x8723, 0x0078}, {0x8724, 0x0086}, +{0x8725, 0x0002}, {0x8726, 0x00b7}, {0x8727, 0x008f}, +{0x8728, 0x0077}, {0x8729, 0x0020}, {0x872a, 0x0012}, +{0x872b, 0x00f7}, {0x872c, 0x008f}, {0x872d, 0x0075}, +{0x872e, 0x0086}, {0x872f, 0x0002}, {0x8730, 0x00b7}, +{0x8731, 0x008f}, {0x8732, 0x0074}, {0x8733, 0x0020}, +{0x8734, 0x0008}, {0x8735, 0x00f7}, {0x8736, 0x008f}, +{0x8737, 0x0072}, {0x8738, 0x0086}, {0x8739, 0x0002}, +{0x873a, 0x00b7}, {0x873b, 0x008f}, {0x873c, 0x0071}, +{0x873d, 0x007e}, {0x873e, 0x0087}, {0x873f, 0x0047}, +{0x8740, 0x0086}, {0x8741, 0x0004}, {0x8742, 0x0097}, +{0x8743, 0x0040}, {0x8744, 0x007e}, {0x8745, 0x0089}, +{0x8746, 0x006e}, {0x8747, 0x00ce}, {0x8748, 0x008f}, +{0x8749, 0x0072}, {0x874a, 0x00bd}, {0x874b, 0x0089}, +{0x874c, 0x00f7}, {0x874d, 0x00ce}, {0x874e, 0x008f}, +{0x874f, 0x0075}, {0x8750, 0x00bd}, {0x8751, 0x0089}, +{0x8752, 0x00f7}, {0x8753, 0x00ce}, {0x8754, 0x008f}, +{0x8755, 0x0078}, {0x8756, 0x00bd}, {0x8757, 0x0089}, +{0x8758, 0x00f7}, {0x8759, 0x00ce}, {0x875a, 0x008f}, +{0x875b, 0x007b}, {0x875c, 0x00bd}, {0x875d, 0x0089}, +{0x875e, 0x00f7}, {0x875f, 0x004f}, {0x8760, 0x00b7}, +{0x8761, 0x008f}, {0x8762, 0x007d}, {0x8763, 0x00b7}, +{0x8764, 0x008f}, {0x8765, 0x0081}, {0x8766, 0x00b6}, +{0x8767, 0x008f}, {0x8768, 0x0072}, {0x8769, 0x0027}, +{0x876a, 0x0047}, {0x876b, 0x007c}, {0x876c, 0x008f}, +{0x876d, 0x007d}, {0x876e, 0x00b6}, {0x876f, 0x008f}, +{0x8770, 0x0075}, {0x8771, 0x0027}, {0x8772, 0x003f}, +{0x8773, 0x007c}, {0x8774, 0x008f}, {0x8775, 0x007d}, +{0x8776, 0x00b6}, {0x8777, 0x008f}, {0x8778, 0x0078}, +{0x8779, 0x0027}, {0x877a, 0x0037}, {0x877b, 0x007c}, +{0x877c, 0x008f}, {0x877d, 0x007d}, {0x877e, 0x00b6}, +{0x877f, 0x008f}, {0x8780, 0x007b}, {0x8781, 0x0027}, +{0x8782, 0x002f}, {0x8783, 0x007f}, {0x8784, 0x008f}, +{0x8785, 0x007d}, {0x8786, 0x007c}, {0x8787, 0x008f}, +{0x8788, 0x0081}, {0x8789, 0x007a}, {0x878a, 0x008f}, +{0x878b, 0x0072}, {0x878c, 0x0027}, {0x878d, 0x001b}, +{0x878e, 0x007c}, {0x878f, 0x008f}, {0x8790, 0x007d}, +{0x8791, 0x007a}, {0x8792, 0x008f}, {0x8793, 0x0075}, +{0x8794, 0x0027}, {0x8795, 0x0016}, {0x8796, 0x007c}, +{0x8797, 0x008f}, {0x8798, 0x007d}, {0x8799, 0x007a}, +{0x879a, 0x008f}, {0x879b, 0x0078}, {0x879c, 0x0027}, +{0x879d, 0x0011}, {0x879e, 0x007c}, {0x879f, 0x008f}, +{0x87a0, 0x007d}, {0x87a1, 0x007a}, {0x87a2, 0x008f}, +{0x87a3, 0x007b}, {0x87a4, 0x0027}, {0x87a5, 0x000c}, +{0x87a6, 0x007e}, {0x87a7, 0x0087}, {0x87a8, 0x0083}, +{0x87a9, 0x007a}, {0x87aa, 0x008f}, {0x87ab, 0x0075}, +{0x87ac, 0x007a}, {0x87ad, 0x008f}, {0x87ae, 0x0078}, +{0x87af, 0x007a}, {0x87b0, 0x008f}, {0x87b1, 0x007b}, +{0x87b2, 0x00ce}, {0x87b3, 0x00c1}, {0x87b4, 0x00fc}, +{0x87b5, 0x00f6}, {0x87b6, 0x008f}, {0x87b7, 0x007d}, +{0x87b8, 0x003a}, {0x87b9, 0x00a6}, {0x87ba, 0x0000}, +{0x87bb, 0x00b7}, {0x87bc, 0x0012}, {0x87bd, 0x0070}, +{0x87be, 0x00b6}, {0x87bf, 0x008f}, {0x87c0, 0x0072}, +{0x87c1, 0x0026}, {0x87c2, 0x0003}, {0x87c3, 0x007e}, +{0x87c4, 0x0087}, {0x87c5, 0x00fa}, {0x87c6, 0x00b6}, +{0x87c7, 0x008f}, {0x87c8, 0x0075}, {0x87c9, 0x0026}, +{0x87ca, 0x000a}, {0x87cb, 0x0018}, {0x87cc, 0x00ce}, +{0x87cd, 0x008f}, {0x87ce, 0x0073}, {0x87cf, 0x00bd}, +{0x87d0, 0x0089}, {0x87d1, 0x00d5}, {0x87d2, 0x007e}, +{0x87d3, 0x0087}, {0x87d4, 0x00fa}, {0x87d5, 0x00b6}, +{0x87d6, 0x008f}, {0x87d7, 0x0078}, {0x87d8, 0x0026}, +{0x87d9, 0x000a}, {0x87da, 0x0018}, {0x87db, 0x00ce}, +{0x87dc, 0x008f}, {0x87dd, 0x0076}, {0x87de, 0x00bd}, +{0x87df, 0x0089}, {0x87e0, 0x00d5}, {0x87e1, 0x007e}, +{0x87e2, 0x0087}, {0x87e3, 0x00fa}, {0x87e4, 0x00b6}, +{0x87e5, 0x008f}, {0x87e6, 0x007b}, {0x87e7, 0x0026}, +{0x87e8, 0x000a}, {0x87e9, 0x0018}, {0x87ea, 0x00ce}, +{0x87eb, 0x008f}, {0x87ec, 0x0079}, {0x87ed, 0x00bd}, +{0x87ee, 0x0089}, {0x87ef, 0x00d5}, {0x87f0, 0x007e}, +{0x87f1, 0x0087}, {0x87f2, 0x00fa}, {0x87f3, 0x0086}, +{0x87f4, 0x0005}, {0x87f5, 0x0097}, {0x87f6, 0x0040}, +{0x87f7, 0x007e}, {0x87f8, 0x0089}, {0x87f9, 0x006e}, +{0x87fa, 0x00b6}, {0x87fb, 0x008f}, {0x87fc, 0x0075}, +{0x87fd, 0x0081}, {0x87fe, 0x0007}, {0x87ff, 0x002e}, +{0x8800, 0x00f2}, {0x8801, 0x00f6}, {0x8802, 0x0012}, +{0x8803, 0x0006}, {0x8804, 0x00c4}, {0x8805, 0x00f8}, +{0x8806, 0x001b}, {0x8807, 0x00b7}, {0x8808, 0x0012}, +{0x8809, 0x0006}, {0x880a, 0x00b6}, {0x880b, 0x008f}, +{0x880c, 0x0078}, {0x880d, 0x0081}, {0x880e, 0x0007}, +{0x880f, 0x002e}, {0x8810, 0x00e2}, {0x8811, 0x0048}, +{0x8812, 0x0048}, {0x8813, 0x0048}, {0x8814, 0x00f6}, +{0x8815, 0x0012}, {0x8816, 0x0006}, {0x8817, 0x00c4}, +{0x8818, 0x00c7}, {0x8819, 0x001b}, {0x881a, 0x00b7}, +{0x881b, 0x0012}, {0x881c, 0x0006}, {0x881d, 0x00b6}, +{0x881e, 0x008f}, {0x881f, 0x007b}, {0x8820, 0x0081}, +{0x8821, 0x0007}, {0x8822, 0x002e}, {0x8823, 0x00cf}, +{0x8824, 0x00f6}, {0x8825, 0x0012}, {0x8826, 0x0005}, +{0x8827, 0x00c4}, {0x8828, 0x00f8}, {0x8829, 0x001b}, +{0x882a, 0x00b7}, {0x882b, 0x0012}, {0x882c, 0x0005}, +{0x882d, 0x0086}, {0x882e, 0x0000}, {0x882f, 0x00f6}, +{0x8830, 0x008f}, {0x8831, 0x0071}, {0x8832, 0x00bd}, +{0x8833, 0x0089}, {0x8834, 0x0094}, {0x8835, 0x0086}, +{0x8836, 0x0001}, {0x8837, 0x00f6}, {0x8838, 0x008f}, +{0x8839, 0x0074}, {0x883a, 0x00bd}, {0x883b, 0x0089}, +{0x883c, 0x0094}, {0x883d, 0x0086}, {0x883e, 0x0002}, +{0x883f, 0x00f6}, {0x8840, 0x008f}, {0x8841, 0x0077}, +{0x8842, 0x00bd}, {0x8843, 0x0089}, {0x8844, 0x0094}, +{0x8845, 0x0086}, {0x8846, 0x0003}, {0x8847, 0x00f6}, +{0x8848, 0x008f}, {0x8849, 0x007a}, {0x884a, 0x00bd}, +{0x884b, 0x0089}, {0x884c, 0x0094}, {0x884d, 0x00ce}, +{0x884e, 0x008f}, {0x884f, 0x0070}, {0x8850, 0x00a6}, +{0x8851, 0x0001}, {0x8852, 0x0081}, {0x8853, 0x0001}, +{0x8854, 0x0027}, {0x8855, 0x0007}, {0x8856, 0x0081}, +{0x8857, 0x0003}, {0x8858, 0x0027}, {0x8859, 0x0003}, +{0x885a, 0x007e}, {0x885b, 0x0088}, {0x885c, 0x0066}, +{0x885d, 0x00a6}, {0x885e, 0x0000}, {0x885f, 0x00b8}, +{0x8860, 0x008f}, {0x8861, 0x0081}, {0x8862, 0x0084}, +{0x8863, 0x0001}, {0x8864, 0x0026}, {0x8865, 0x000b}, +{0x8866, 0x008c}, {0x8867, 0x008f}, {0x8868, 0x0079}, +{0x8869, 0x002c}, {0x886a, 0x000e}, {0x886b, 0x0008}, +{0x886c, 0x0008}, {0x886d, 0x0008}, {0x886e, 0x007e}, +{0x886f, 0x0088}, {0x8870, 0x0050}, {0x8871, 0x00b6}, +{0x8872, 0x0012}, {0x8873, 0x0004}, {0x8874, 0x008a}, +{0x8875, 0x0040}, {0x8876, 0x00b7}, {0x8877, 0x0012}, +{0x8878, 0x0004}, {0x8879, 0x00b6}, {0x887a, 0x0012}, +{0x887b, 0x0004}, {0x887c, 0x0084}, {0x887d, 0x00fb}, +{0x887e, 0x0084}, {0x887f, 0x00ef}, {0x8880, 0x00b7}, +{0x8881, 0x0012}, {0x8882, 0x0004}, {0x8883, 0x00b6}, +{0x8884, 0x0012}, {0x8885, 0x0007}, {0x8886, 0x0036}, +{0x8887, 0x00b6}, {0x8888, 0x008f}, {0x8889, 0x007c}, +{0x888a, 0x0048}, {0x888b, 0x0048}, {0x888c, 0x00b7}, +{0x888d, 0x0012}, {0x888e, 0x0007}, {0x888f, 0x0086}, +{0x8890, 0x0001}, {0x8891, 0x00ba}, {0x8892, 0x0012}, +{0x8893, 0x0004}, {0x8894, 0x00b7}, {0x8895, 0x0012}, +{0x8896, 0x0004}, {0x8897, 0x0001}, {0x8898, 0x0001}, +{0x8899, 0x0001}, {0x889a, 0x0001}, {0x889b, 0x0001}, +{0x889c, 0x0001}, {0x889d, 0x0086}, {0x889e, 0x00fe}, +{0x889f, 0x00b4}, {0x88a0, 0x0012}, {0x88a1, 0x0004}, +{0x88a2, 0x00b7}, {0x88a3, 0x0012}, {0x88a4, 0x0004}, +{0x88a5, 0x0086}, {0x88a6, 0x0002}, {0x88a7, 0x00ba}, +{0x88a8, 0x0012}, {0x88a9, 0x0004}, {0x88aa, 0x00b7}, +{0x88ab, 0x0012}, {0x88ac, 0x0004}, {0x88ad, 0x0086}, +{0x88ae, 0x00fd}, {0x88af, 0x00b4}, {0x88b0, 0x0012}, +{0x88b1, 0x0004}, {0x88b2, 0x00b7}, {0x88b3, 0x0012}, +{0x88b4, 0x0004}, {0x88b5, 0x0032}, {0x88b6, 0x00b7}, +{0x88b7, 0x0012}, {0x88b8, 0x0007}, {0x88b9, 0x00b6}, +{0x88ba, 0x0012}, {0x88bb, 0x0000}, {0x88bc, 0x0084}, +{0x88bd, 0x0008}, {0x88be, 0x0081}, {0x88bf, 0x0008}, +{0x88c0, 0x0027}, {0x88c1, 0x000f}, {0x88c2, 0x007c}, +{0x88c3, 0x0082}, {0x88c4, 0x0008}, {0x88c5, 0x0026}, +{0x88c6, 0x0007}, {0x88c7, 0x0086}, {0x88c8, 0x0076}, +{0x88c9, 0x0097}, {0x88ca, 0x0040}, {0x88cb, 0x007e}, +{0x88cc, 0x0089}, {0x88cd, 0x006e}, {0x88ce, 0x007e}, +{0x88cf, 0x0086}, {0x88d0, 0x00ec}, {0x88d1, 0x00b6}, +{0x88d2, 0x008f}, {0x88d3, 0x007f}, {0x88d4, 0x0081}, +{0x88d5, 0x000f}, {0x88d6, 0x0027}, {0x88d7, 0x003c}, +{0x88d8, 0x00bd}, {0x88d9, 0x00e6}, {0x88da, 0x00c7}, +{0x88db, 0x00b7}, {0x88dc, 0x0012}, {0x88dd, 0x000d}, +{0x88de, 0x00bd}, {0x88df, 0x00e6}, {0x88e0, 0x00cb}, +{0x88e1, 0x00b6}, {0x88e2, 0x0012}, {0x88e3, 0x0004}, +{0x88e4, 0x008a}, {0x88e5, 0x0020}, {0x88e6, 0x00b7}, +{0x88e7, 0x0012}, {0x88e8, 0x0004}, {0x88e9, 0x00ce}, +{0x88ea, 0x00ff}, {0x88eb, 0x00ff}, {0x88ec, 0x00b6}, +{0x88ed, 0x0012}, {0x88ee, 0x0000}, {0x88ef, 0x0081}, +{0x88f0, 0x000c}, {0x88f1, 0x0026}, {0x88f2, 0x0005}, +{0x88f3, 0x0009}, {0x88f4, 0x0026}, {0x88f5, 0x00f6}, +{0x88f6, 0x0027}, {0x88f7, 0x001c}, {0x88f8, 0x00b6}, +{0x88f9, 0x0012}, {0x88fa, 0x0004}, {0x88fb, 0x0084}, +{0x88fc, 0x00df}, {0x88fd, 0x00b7}, {0x88fe, 0x0012}, +{0x88ff, 0x0004}, {0x8900, 0x0096}, {0x8901, 0x0083}, +{0x8902, 0x0081}, {0x8903, 0x0007}, {0x8904, 0x002c}, +{0x8905, 0x0005}, {0x8906, 0x007c}, {0x8907, 0x0000}, +{0x8908, 0x0083}, {0x8909, 0x0020}, {0x890a, 0x0006}, +{0x890b, 0x0096}, {0x890c, 0x0083}, {0x890d, 0x008b}, +{0x890e, 0x0008}, {0x890f, 0x0097}, {0x8910, 0x0083}, +{0x8911, 0x007e}, {0x8912, 0x0085}, {0x8913, 0x0041}, +{0x8914, 0x007f}, {0x8915, 0x008f}, {0x8916, 0x007e}, +{0x8917, 0x0086}, {0x8918, 0x0080}, {0x8919, 0x00b7}, +{0x891a, 0x0012}, {0x891b, 0x000c}, {0x891c, 0x0086}, +{0x891d, 0x0001}, {0x891e, 0x00b7}, {0x891f, 0x008f}, +{0x8920, 0x007d}, {0x8921, 0x00b6}, {0x8922, 0x0012}, +{0x8923, 0x000c}, {0x8924, 0x0084}, {0x8925, 0x007f}, +{0x8926, 0x00b7}, {0x8927, 0x0012}, {0x8928, 0x000c}, +{0x8929, 0x008a}, {0x892a, 0x0080}, {0x892b, 0x00b7}, +{0x892c, 0x0012}, {0x892d, 0x000c}, {0x892e, 0x0086}, +{0x892f, 0x000a}, {0x8930, 0x00bd}, {0x8931, 0x008a}, +{0x8932, 0x0006}, {0x8933, 0x00b6}, {0x8934, 0x0012}, +{0x8935, 0x000a}, {0x8936, 0x002a}, {0x8937, 0x0009}, +{0x8938, 0x00b6}, {0x8939, 0x0012}, {0x893a, 0x000c}, +{0x893b, 0x00ba}, {0x893c, 0x008f}, {0x893d, 0x007d}, +{0x893e, 0x00b7}, {0x893f, 0x0012}, {0x8940, 0x000c}, +{0x8941, 0x00b6}, {0x8942, 0x008f}, {0x8943, 0x007e}, +{0x8944, 0x0081}, {0x8945, 0x0060}, {0x8946, 0x0027}, +{0x8947, 0x001a}, {0x8948, 0x008b}, {0x8949, 0x0020}, +{0x894a, 0x00b7}, {0x894b, 0x008f}, {0x894c, 0x007e}, +{0x894d, 0x00b6}, {0x894e, 0x0012}, {0x894f, 0x000c}, +{0x8950, 0x0084}, {0x8951, 0x009f}, {0x8952, 0x00ba}, +{0x8953, 0x008f}, {0x8954, 0x007e}, {0x8955, 0x00b7}, +{0x8956, 0x0012}, {0x8957, 0x000c}, {0x8958, 0x00b6}, +{0x8959, 0x008f}, {0x895a, 0x007d}, {0x895b, 0x0048}, +{0x895c, 0x00b7}, {0x895d, 0x008f}, {0x895e, 0x007d}, +{0x895f, 0x007e}, {0x8960, 0x0089}, {0x8961, 0x0021}, +{0x8962, 0x00b6}, {0x8963, 0x0012}, {0x8964, 0x0004}, +{0x8965, 0x008a}, {0x8966, 0x0020}, {0x8967, 0x00b7}, +{0x8968, 0x0012}, {0x8969, 0x0004}, {0x896a, 0x00bd}, +{0x896b, 0x008a}, {0x896c, 0x000a}, {0x896d, 0x004f}, +{0x896e, 0x0039}, {0x896f, 0x00a6}, {0x8970, 0x0000}, +{0x8971, 0x0018}, {0x8972, 0x00a7}, {0x8973, 0x0000}, +{0x8974, 0x0008}, {0x8975, 0x0018}, {0x8976, 0x0008}, +{0x8977, 0x005a}, {0x8978, 0x0026}, {0x8979, 0x00f5}, +{0x897a, 0x0039}, {0x897b, 0x0036}, {0x897c, 0x006c}, +{0x897d, 0x0000}, {0x897e, 0x0032}, {0x897f, 0x00ba}, +{0x8980, 0x008f}, {0x8981, 0x007f}, {0x8982, 0x00b7}, +{0x8983, 0x008f}, {0x8984, 0x007f}, {0x8985, 0x00b6}, +{0x8986, 0x0012}, {0x8987, 0x0009}, {0x8988, 0x0084}, +{0x8989, 0x0003}, {0x898a, 0x00a7}, {0x898b, 0x0001}, +{0x898c, 0x00b6}, {0x898d, 0x0012}, {0x898e, 0x0006}, +{0x898f, 0x0084}, {0x8990, 0x003f}, {0x8991, 0x00a7}, +{0x8992, 0x0002}, {0x8993, 0x0039}, {0x8994, 0x0036}, +{0x8995, 0x0086}, {0x8996, 0x0003}, {0x8997, 0x00b7}, +{0x8998, 0x008f}, {0x8999, 0x0080}, {0x899a, 0x0032}, +{0x899b, 0x00c1}, {0x899c, 0x0000}, {0x899d, 0x0026}, +{0x899e, 0x0006}, {0x899f, 0x00b7}, {0x89a0, 0x008f}, +{0x89a1, 0x007c}, {0x89a2, 0x007e}, {0x89a3, 0x0089}, +{0x89a4, 0x00c9}, {0x89a5, 0x00c1}, {0x89a6, 0x0001}, +{0x89a7, 0x0027}, {0x89a8, 0x0018}, {0x89a9, 0x00c1}, +{0x89aa, 0x0002}, {0x89ab, 0x0027}, {0x89ac, 0x000c}, +{0x89ad, 0x00c1}, {0x89ae, 0x0003}, {0x89af, 0x0027}, +{0x89b0, 0x0000}, {0x89b1, 0x00f6}, {0x89b2, 0x008f}, +{0x89b3, 0x0080}, {0x89b4, 0x0005}, {0x89b5, 0x0005}, +{0x89b6, 0x00f7}, {0x89b7, 0x008f}, {0x89b8, 0x0080}, +{0x89b9, 0x00f6}, {0x89ba, 0x008f}, {0x89bb, 0x0080}, +{0x89bc, 0x0005}, {0x89bd, 0x0005}, {0x89be, 0x00f7}, +{0x89bf, 0x008f}, {0x89c0, 0x0080}, {0x89c1, 0x00f6}, +{0x89c2, 0x008f}, {0x89c3, 0x0080}, {0x89c4, 0x0005}, +{0x89c5, 0x0005}, {0x89c6, 0x00f7}, {0x89c7, 0x008f}, +{0x89c8, 0x0080}, {0x89c9, 0x00f6}, {0x89ca, 0x008f}, +{0x89cb, 0x0080}, {0x89cc, 0x0053}, {0x89cd, 0x00f4}, +{0x89ce, 0x0012}, {0x89cf, 0x0007}, {0x89d0, 0x001b}, +{0x89d1, 0x00b7}, {0x89d2, 0x0012}, {0x89d3, 0x0007}, +{0x89d4, 0x0039}, {0x89d5, 0x00ce}, {0x89d6, 0x008f}, +{0x89d7, 0x0070}, {0x89d8, 0x00a6}, {0x89d9, 0x0000}, +{0x89da, 0x0018}, {0x89db, 0x00e6}, {0x89dc, 0x0000}, +{0x89dd, 0x0018}, {0x89de, 0x00a7}, {0x89df, 0x0000}, +{0x89e0, 0x00e7}, {0x89e1, 0x0000}, {0x89e2, 0x00a6}, +{0x89e3, 0x0001}, {0x89e4, 0x0018}, {0x89e5, 0x00e6}, +{0x89e6, 0x0001}, {0x89e7, 0x0018}, {0x89e8, 0x00a7}, +{0x89e9, 0x0001}, {0x89ea, 0x00e7}, {0x89eb, 0x0001}, +{0x89ec, 0x00a6}, {0x89ed, 0x0002}, {0x89ee, 0x0018}, +{0x89ef, 0x00e6}, {0x89f0, 0x0002}, {0x89f1, 0x0018}, +{0x89f2, 0x00a7}, {0x89f3, 0x0002}, {0x89f4, 0x00e7}, +{0x89f5, 0x0002}, {0x89f6, 0x0039}, {0x89f7, 0x00a6}, +{0x89f8, 0x0000}, {0x89f9, 0x0084}, {0x89fa, 0x0007}, +{0x89fb, 0x00e6}, {0x89fc, 0x0000}, {0x89fd, 0x00c4}, +{0x89fe, 0x0038}, {0x89ff, 0x0054}, {0x8a00, 0x0054}, +{0x8a01, 0x0054}, {0x8a02, 0x001b}, {0x8a03, 0x00a7}, +{0x8a04, 0x0000}, {0x8a05, 0x0039}, {0x8a06, 0x004a}, +{0x8a07, 0x0026}, {0x8a08, 0x00fd}, {0x8a09, 0x0039}, +{0x8a0a, 0x0096}, {0x8a0b, 0x0022}, {0x8a0c, 0x0084}, +{0x8a0d, 0x000f}, {0x8a0e, 0x0097}, {0x8a0f, 0x0022}, +{0x8a10, 0x0086}, {0x8a11, 0x0001}, {0x8a12, 0x00b7}, +{0x8a13, 0x008f}, {0x8a14, 0x0070}, {0x8a15, 0x00b6}, +{0x8a16, 0x0012}, {0x8a17, 0x0007}, {0x8a18, 0x00b7}, +{0x8a19, 0x008f}, {0x8a1a, 0x0071}, {0x8a1b, 0x00f6}, +{0x8a1c, 0x0012}, {0x8a1d, 0x000c}, {0x8a1e, 0x00c4}, +{0x8a1f, 0x000f}, {0x8a20, 0x00c8}, {0x8a21, 0x000f}, +{0x8a22, 0x00f7}, {0x8a23, 0x008f}, {0x8a24, 0x0072}, +{0x8a25, 0x00f6}, {0x8a26, 0x008f}, {0x8a27, 0x0072}, +{0x8a28, 0x00b6}, {0x8a29, 0x008f}, {0x8a2a, 0x0071}, +{0x8a2b, 0x0084}, {0x8a2c, 0x0003}, {0x8a2d, 0x0027}, +{0x8a2e, 0x0014}, {0x8a2f, 0x0081}, {0x8a30, 0x0001}, +{0x8a31, 0x0027}, {0x8a32, 0x001c}, {0x8a33, 0x0081}, +{0x8a34, 0x0002}, {0x8a35, 0x0027}, {0x8a36, 0x0024}, +{0x8a37, 0x00f4}, {0x8a38, 0x008f}, {0x8a39, 0x0070}, +{0x8a3a, 0x0027}, {0x8a3b, 0x002a}, {0x8a3c, 0x0096}, +{0x8a3d, 0x0022}, {0x8a3e, 0x008a}, {0x8a3f, 0x0080}, +{0x8a40, 0x007e}, {0x8a41, 0x008a}, {0x8a42, 0x0064}, +{0x8a43, 0x00f4}, {0x8a44, 0x008f}, {0x8a45, 0x0070}, +{0x8a46, 0x0027}, {0x8a47, 0x001e}, {0x8a48, 0x0096}, +{0x8a49, 0x0022}, {0x8a4a, 0x008a}, {0x8a4b, 0x0010}, +{0x8a4c, 0x007e}, {0x8a4d, 0x008a}, {0x8a4e, 0x0064}, +{0x8a4f, 0x00f4}, {0x8a50, 0x008f}, {0x8a51, 0x0070}, +{0x8a52, 0x0027}, {0x8a53, 0x0012}, {0x8a54, 0x0096}, +{0x8a55, 0x0022}, {0x8a56, 0x008a}, {0x8a57, 0x0020}, +{0x8a58, 0x007e}, {0x8a59, 0x008a}, {0x8a5a, 0x0064}, +{0x8a5b, 0x00f4}, {0x8a5c, 0x008f}, {0x8a5d, 0x0070}, +{0x8a5e, 0x0027}, {0x8a5f, 0x0006}, {0x8a60, 0x0096}, +{0x8a61, 0x0022}, {0x8a62, 0x008a}, {0x8a63, 0x0040}, +{0x8a64, 0x0097}, {0x8a65, 0x0022}, {0x8a66, 0x0074}, +{0x8a67, 0x008f}, {0x8a68, 0x0071}, {0x8a69, 0x0074}, +{0x8a6a, 0x008f}, {0x8a6b, 0x0071}, {0x8a6c, 0x0078}, +{0x8a6d, 0x008f}, {0x8a6e, 0x0070}, {0x8a6f, 0x00b6}, +{0x8a70, 0x008f}, {0x8a71, 0x0070}, {0x8a72, 0x0085}, +{0x8a73, 0x0010}, {0x8a74, 0x0027}, {0x8a75, 0x00af}, +{0x8a76, 0x00d6}, {0x8a77, 0x0022}, {0x8a78, 0x00c4}, +{0x8a79, 0x0010}, {0x8a7a, 0x0058}, {0x8a7b, 0x00b6}, +{0x8a7c, 0x0012}, {0x8a7d, 0x0070}, {0x8a7e, 0x0081}, +{0x8a7f, 0x00e4}, {0x8a80, 0x0027}, {0x8a81, 0x0036}, +{0x8a82, 0x0081}, {0x8a83, 0x00e1}, {0x8a84, 0x0026}, +{0x8a85, 0x000c}, {0x8a86, 0x0096}, {0x8a87, 0x0022}, +{0x8a88, 0x0084}, {0x8a89, 0x0020}, {0x8a8a, 0x0044}, +{0x8a8b, 0x001b}, {0x8a8c, 0x00d6}, {0x8a8d, 0x0022}, +{0x8a8e, 0x00c4}, {0x8a8f, 0x00cf}, {0x8a90, 0x0020}, +{0x8a91, 0x0023}, {0x8a92, 0x0058}, {0x8a93, 0x0081}, +{0x8a94, 0x00c6}, {0x8a95, 0x0026}, {0x8a96, 0x000d}, +{0x8a97, 0x0096}, {0x8a98, 0x0022}, {0x8a99, 0x0084}, +{0x8a9a, 0x0040}, {0x8a9b, 0x0044}, {0x8a9c, 0x0044}, +{0x8a9d, 0x001b}, {0x8a9e, 0x00d6}, {0x8a9f, 0x0022}, +{0x8aa0, 0x00c4}, {0x8aa1, 0x00af}, {0x8aa2, 0x0020}, +{0x8aa3, 0x0011}, {0x8aa4, 0x0058}, {0x8aa5, 0x0081}, +{0x8aa6, 0x0027}, {0x8aa7, 0x0026}, {0x8aa8, 0x000f}, +{0x8aa9, 0x0096}, {0x8aaa, 0x0022}, {0x8aab, 0x0084}, +{0x8aac, 0x0080}, {0x8aad, 0x0044}, {0x8aae, 0x0044}, +{0x8aaf, 0x0044}, {0x8ab0, 0x001b}, {0x8ab1, 0x00d6}, +{0x8ab2, 0x0022}, {0x8ab3, 0x00c4}, {0x8ab4, 0x006f}, +{0x8ab5, 0x001b}, {0x8ab6, 0x0097}, {0x8ab7, 0x0022}, +{0x8ab8, 0x0039}, {0x8ab9, 0x0027}, {0x8aba, 0x000c}, +{0x8abb, 0x007c}, {0x8abc, 0x0082}, {0x8abd, 0x0006}, +{0x8abe, 0x00bd}, {0x8abf, 0x00d9}, {0x8ac0, 0x00ed}, +{0x8ac1, 0x00b6}, {0x8ac2, 0x0082}, {0x8ac3, 0x0007}, +{0x8ac4, 0x007e}, {0x8ac5, 0x008a}, {0x8ac6, 0x00b9}, +{0x8ac7, 0x007f}, {0x8ac8, 0x0082}, {0x8ac9, 0x0006}, +{0x8aca, 0x0039}, { 0x0, 0x0 } +}; +#endif + + +/* phy types */ +#define CAS_PHY_UNKNOWN 0x00 +#define CAS_PHY_SERDES 0x01 +#define CAS_PHY_MII_MDIO0 0x02 +#define CAS_PHY_MII_MDIO1 0x04 +#define CAS_PHY_MII(x) ((x) & (CAS_PHY_MII_MDIO0 | CAS_PHY_MII_MDIO1)) + +/* _RING_INDEX is the index for the ring sizes to be used. _RING_SIZE + * is the actual size. the default index for the various rings is + * 8. NOTE: there a bunch of alignment constraints for the rings. to + * deal with that, i just allocate rings to create the desired + * alignment. here are the constraints: + * RX DESC and COMP rings must be 8KB aligned + * TX DESC must be 2KB aligned. + * if you change the numbers, be cognizant of how the alignment will change + * in INIT_BLOCK as well. + */ + +#define DESC_RING_I_TO_S(x) (32*(1 << (x))) +#define COMP_RING_I_TO_S(x) (128*(1 << (x))) +#define TX_DESC_RING_INDEX 4 /* 512 = 8k */ +#define RX_DESC_RING_INDEX 4 /* 512 = 8k */ +#define RX_COMP_RING_INDEX 4 /* 2048 = 64k: should be 4x rx ring size */ + +#if (TX_DESC_RING_INDEX > 8) || (TX_DESC_RING_INDEX < 0) +#error TX_DESC_RING_INDEX must be between 0 and 8 +#endif + +#if (RX_DESC_RING_INDEX > 8) || (RX_DESC_RING_INDEX < 0) +#error RX_DESC_RING_INDEX must be between 0 and 8 +#endif + +#if (RX_COMP_RING_INDEX > 8) || (RX_COMP_RING_INDEX < 0) +#error RX_COMP_RING_INDEX must be between 0 and 8 +#endif + +#define N_TX_RINGS MAX_TX_RINGS /* for QoS */ +#define N_TX_RINGS_MASK MAX_TX_RINGS_MASK +#define N_RX_DESC_RINGS MAX_RX_DESC_RINGS /* 1 for ipsec */ +#define N_RX_COMP_RINGS 0x1 /* for mult. PCI interrupts */ + +/* number of flows that can go through re-assembly */ +#define N_RX_FLOWS 64 + +#define TX_DESC_RING_SIZE DESC_RING_I_TO_S(TX_DESC_RING_INDEX) +#define RX_DESC_RING_SIZE DESC_RING_I_TO_S(RX_DESC_RING_INDEX) +#define RX_COMP_RING_SIZE COMP_RING_I_TO_S(RX_COMP_RING_INDEX) +#define TX_DESC_RINGN_INDEX(x) TX_DESC_RING_INDEX +#define RX_DESC_RINGN_INDEX(x) RX_DESC_RING_INDEX +#define RX_COMP_RINGN_INDEX(x) RX_COMP_RING_INDEX +#define TX_DESC_RINGN_SIZE(x) TX_DESC_RING_SIZE +#define RX_DESC_RINGN_SIZE(x) RX_DESC_RING_SIZE +#define RX_COMP_RINGN_SIZE(x) RX_COMP_RING_SIZE + +/* convert values */ +#define CAS_BASE(x, y) (((y) << (x ## _SHIFT)) & (x ## _MASK)) +#define CAS_VAL(x, y) (((y) & (x ## _MASK)) >> (x ## _SHIFT)) +#define CAS_TX_RINGN_BASE(y) ((TX_DESC_RINGN_INDEX(y) << \ + TX_CFG_DESC_RINGN_SHIFT(y)) & \ + TX_CFG_DESC_RINGN_MASK(y)) + +/* min is 2k, but we can't do jumbo frames unless it's at least 8k */ +#define CAS_MIN_PAGE_SHIFT 11 /* 2048 */ +#define CAS_JUMBO_PAGE_SHIFT 13 /* 8192 */ +#define CAS_MAX_PAGE_SHIFT 14 /* 16384 */ + +#define TX_DESC_BUFLEN_MASK 0x0000000000003FFFULL /* buffer length in + bytes. 0 - 9256 */ +#define TX_DESC_BUFLEN_SHIFT 0 +#define TX_DESC_CSUM_START_MASK 0x00000000001F8000ULL /* checksum start. # + of bytes to be + skipped before + csum calc begins. + value must be + even */ +#define TX_DESC_CSUM_START_SHIFT 15 +#define TX_DESC_CSUM_STUFF_MASK 0x000000001FE00000ULL /* checksum stuff. + byte offset w/in + the pkt for the + 1st csum byte. + must be > 8 */ +#define TX_DESC_CSUM_STUFF_SHIFT 21 +#define TX_DESC_CSUM_EN 0x0000000020000000ULL /* enable checksum */ +#define TX_DESC_EOF 0x0000000040000000ULL /* end of frame */ +#define TX_DESC_SOF 0x0000000080000000ULL /* start of frame */ +#define TX_DESC_INTME 0x0000000100000000ULL /* interrupt me */ +#define TX_DESC_NO_CRC 0x0000000200000000ULL /* debugging only. + CRC will not be + inserted into + outgoing frame. */ +struct cas_tx_desc { + u64 control; + u64 buffer; +}; + +/* descriptor ring for free buffers contains page-sized buffers. the index + * value is not used by the hw in any way. it's just stored and returned in + * the completion ring. + */ +struct cas_rx_desc { + u64 index; + u64 buffer; +}; + +/* received packets are put on the completion ring. */ +/* word 1 */ +#define RX_COMP1_DATA_SIZE_MASK 0x0000000007FFE000ULL +#define RX_COMP1_DATA_SIZE_SHIFT 13 +#define RX_COMP1_DATA_OFF_MASK 0x000001FFF8000000ULL +#define RX_COMP1_DATA_OFF_SHIFT 27 +#define RX_COMP1_DATA_INDEX_MASK 0x007FFE0000000000ULL +#define RX_COMP1_DATA_INDEX_SHIFT 41 +#define RX_COMP1_SKIP_MASK 0x0180000000000000ULL +#define RX_COMP1_SKIP_SHIFT 55 +#define RX_COMP1_RELEASE_NEXT 0x0200000000000000ULL +#define RX_COMP1_SPLIT_PKT 0x0400000000000000ULL +#define RX_COMP1_RELEASE_FLOW 0x0800000000000000ULL +#define RX_COMP1_RELEASE_DATA 0x1000000000000000ULL +#define RX_COMP1_RELEASE_HDR 0x2000000000000000ULL +#define RX_COMP1_TYPE_MASK 0xC000000000000000ULL +#define RX_COMP1_TYPE_SHIFT 62 + +/* word 2 */ +#define RX_COMP2_NEXT_INDEX_MASK 0x00000007FFE00000ULL +#define RX_COMP2_NEXT_INDEX_SHIFT 21 +#define RX_COMP2_HDR_SIZE_MASK 0x00000FF800000000ULL +#define RX_COMP2_HDR_SIZE_SHIFT 35 +#define RX_COMP2_HDR_OFF_MASK 0x0003F00000000000ULL +#define RX_COMP2_HDR_OFF_SHIFT 44 +#define RX_COMP2_HDR_INDEX_MASK 0xFFFC000000000000ULL +#define RX_COMP2_HDR_INDEX_SHIFT 50 + +/* word 3 */ +#define RX_COMP3_SMALL_PKT 0x0000000000000001ULL +#define RX_COMP3_JUMBO_PKT 0x0000000000000002ULL +#define RX_COMP3_JUMBO_HDR_SPLIT_EN 0x0000000000000004ULL +#define RX_COMP3_CSUM_START_MASK 0x000000000007F000ULL +#define RX_COMP3_CSUM_START_SHIFT 12 +#define RX_COMP3_FLOWID_MASK 0x0000000001F80000ULL +#define RX_COMP3_FLOWID_SHIFT 19 +#define RX_COMP3_OPCODE_MASK 0x000000000E000000ULL +#define RX_COMP3_OPCODE_SHIFT 25 +#define RX_COMP3_FORCE_FLAG 0x0000000010000000ULL +#define RX_COMP3_NO_ASSIST 0x0000000020000000ULL +#define RX_COMP3_LOAD_BAL_MASK 0x000001F800000000ULL +#define RX_COMP3_LOAD_BAL_SHIFT 35 +#define RX_PLUS_COMP3_ENC_PKT 0x0000020000000000ULL /* cas+ */ +#define RX_COMP3_L3_HEAD_OFF_MASK 0x0000FE0000000000ULL /* cas */ +#define RX_COMP3_L3_HEAD_OFF_SHIFT 41 +#define RX_PLUS_COMP_L3_HEAD_OFF_MASK 0x0000FC0000000000ULL /* cas+ */ +#define RX_PLUS_COMP_L3_HEAD_OFF_SHIFT 42 +#define RX_COMP3_SAP_MASK 0xFFFF000000000000ULL +#define RX_COMP3_SAP_SHIFT 48 + +/* word 4 */ +#define RX_COMP4_TCP_CSUM_MASK 0x000000000000FFFFULL +#define RX_COMP4_TCP_CSUM_SHIFT 0 +#define RX_COMP4_PKT_LEN_MASK 0x000000003FFF0000ULL +#define RX_COMP4_PKT_LEN_SHIFT 16 +#define RX_COMP4_PERFECT_MATCH_MASK 0x00000003C0000000ULL +#define RX_COMP4_PERFECT_MATCH_SHIFT 30 +#define RX_COMP4_ZERO 0x0000080000000000ULL +#define RX_COMP4_HASH_VAL_MASK 0x0FFFF00000000000ULL +#define RX_COMP4_HASH_VAL_SHIFT 44 +#define RX_COMP4_HASH_PASS 0x1000000000000000ULL +#define RX_COMP4_BAD 0x4000000000000000ULL +#define RX_COMP4_LEN_MISMATCH 0x8000000000000000ULL + +/* we encode the following: ring/index/release. only 14 bits + * are usable. + * NOTE: the encoding is dependent upon RX_DESC_RING_SIZE and + * MAX_RX_DESC_RINGS. */ +#define RX_INDEX_NUM_MASK 0x0000000000000FFFULL +#define RX_INDEX_NUM_SHIFT 0 +#define RX_INDEX_RING_MASK 0x0000000000001000ULL +#define RX_INDEX_RING_SHIFT 12 +#define RX_INDEX_RELEASE 0x0000000000002000ULL + +struct cas_rx_comp { + u64 word1; + u64 word2; + u64 word3; + u64 word4; +}; + +enum link_state { + link_down = 0, /* No link, will retry */ + link_aneg, /* Autoneg in progress */ + link_force_try, /* Try Forced link speed */ + link_force_ret, /* Forced mode worked, retrying autoneg */ + link_force_ok, /* Stay in forced mode */ + link_up /* Link is up */ +}; + +typedef struct cas_page { + struct list_head list; + struct page *buffer; + dma_addr_t dma_addr; + int used; +} cas_page_t; + + +/* some alignment constraints: + * TX DESC, RX DESC, and RX COMP must each be 8K aligned. + * TX COMPWB must be 8-byte aligned. + * to accomplish this, here's what we do: + * + * INIT_BLOCK_RX_COMP = 64k (already aligned) + * INIT_BLOCK_RX_DESC = 8k + * INIT_BLOCK_TX = 8k + * INIT_BLOCK_RX1_DESC = 8k + * TX COMPWB + */ +#define INIT_BLOCK_TX (TX_DESC_RING_SIZE) +#define INIT_BLOCK_RX_DESC (RX_DESC_RING_SIZE) +#define INIT_BLOCK_RX_COMP (RX_COMP_RING_SIZE) + +struct cas_init_block { + struct cas_rx_comp rxcs[N_RX_COMP_RINGS][INIT_BLOCK_RX_COMP]; + struct cas_rx_desc rxds[N_RX_DESC_RINGS][INIT_BLOCK_RX_DESC]; + struct cas_tx_desc txds[N_TX_RINGS][INIT_BLOCK_TX]; + u64 tx_compwb; +}; + +/* tiny buffers to deal with target abort issue. we allocate a bit + * over so that we don't have target abort issues with these buffers + * as well. + */ +#define TX_TINY_BUF_LEN 0x100 +#define TX_TINY_BUF_BLOCK ((INIT_BLOCK_TX + 1)*TX_TINY_BUF_LEN) + +struct cas_tiny_count { + int nbufs; + int used; +}; + +struct cas { + spinlock_t lock; /* for most bits */ + spinlock_t tx_lock[N_TX_RINGS]; /* tx bits */ + spinlock_t stat_lock[N_TX_RINGS + 1]; /* for stat gathering */ + spinlock_t rx_inuse_lock; /* rx inuse list */ + spinlock_t rx_spare_lock; /* rx spare list */ + + void __iomem *regs; + int tx_new[N_TX_RINGS], tx_old[N_TX_RINGS]; + int rx_old[N_RX_DESC_RINGS]; + int rx_cur[N_RX_COMP_RINGS], rx_new[N_RX_COMP_RINGS]; + int rx_last[N_RX_DESC_RINGS]; + + /* Set when chip is actually in operational state + * (ie. not power managed) */ + int hw_running; + int opened; + struct semaphore pm_sem; /* open/close/suspend/resume */ + + struct cas_init_block *init_block; + struct cas_tx_desc *init_txds[MAX_TX_RINGS]; + struct cas_rx_desc *init_rxds[MAX_RX_DESC_RINGS]; + struct cas_rx_comp *init_rxcs[MAX_RX_COMP_RINGS]; + + /* we use sk_buffs for tx and pages for rx. the rx skbuffs + * are there for flow re-assembly. */ + struct sk_buff *tx_skbs[N_TX_RINGS][TX_DESC_RING_SIZE]; + struct sk_buff_head rx_flows[N_RX_FLOWS]; + cas_page_t *rx_pages[N_RX_DESC_RINGS][RX_DESC_RING_SIZE]; + struct list_head rx_spare_list, rx_inuse_list; + int rx_spares_needed; + + /* for small packets when copying would be quicker than + mapping */ + struct cas_tiny_count tx_tiny_use[N_TX_RINGS][TX_DESC_RING_SIZE]; + u8 *tx_tiny_bufs[N_TX_RINGS]; + + u32 msg_enable; + + /* N_TX_RINGS must be >= N_RX_DESC_RINGS */ + struct net_device_stats net_stats[N_TX_RINGS + 1]; + + u32 pci_cfg[64 >> 2]; + u8 pci_revision; + + int phy_type; + int phy_addr; + u32 phy_id; +#define CAS_FLAG_1000MB_CAP 0x00000001 +#define CAS_FLAG_REG_PLUS 0x00000002 +#define CAS_FLAG_TARGET_ABORT 0x00000004 +#define CAS_FLAG_SATURN 0x00000008 +#define CAS_FLAG_RXD_POST_MASK 0x000000F0 +#define CAS_FLAG_RXD_POST_SHIFT 4 +#define CAS_FLAG_RXD_POST(x) ((1 << (CAS_FLAG_RXD_POST_SHIFT + (x))) & \ + CAS_FLAG_RXD_POST_MASK) +#define CAS_FLAG_ENTROPY_DEV 0x00000100 +#define CAS_FLAG_NO_HW_CSUM 0x00000200 + u32 cas_flags; + int packet_min; /* minimum packet size */ + int tx_fifo_size; + int rx_fifo_size; + int rx_pause_off; + int rx_pause_on; + int crc_size; /* 4 if half-duplex */ + + int pci_irq_INTC; + int min_frame_size; /* for tx fifo workaround */ + + /* page size allocation */ + int page_size; + int page_order; + int mtu_stride; + + u32 mac_rx_cfg; + + /* Autoneg & PHY control */ + int link_cntl; + int link_fcntl; + enum link_state lstate; + struct timer_list link_timer; + int timer_ticks; + struct work_struct reset_task; +#if 0 + atomic_t reset_task_pending; +#else + atomic_t reset_task_pending; + atomic_t reset_task_pending_mtu; + atomic_t reset_task_pending_spare; + atomic_t reset_task_pending_all; +#endif + +#ifdef CONFIG_CASSINI_QGE_DEBUG + atomic_t interrupt_seen; /* 1 if any interrupts are getting through */ +#endif + + /* Link-down problem workaround */ +#define LINK_TRANSITION_UNKNOWN 0 +#define LINK_TRANSITION_ON_FAILURE 1 +#define LINK_TRANSITION_STILL_FAILED 2 +#define LINK_TRANSITION_LINK_UP 3 +#define LINK_TRANSITION_LINK_CONFIG 4 +#define LINK_TRANSITION_LINK_DOWN 5 +#define LINK_TRANSITION_REQUESTED_RESET 6 + int link_transition; + int link_transition_jiffies_valid; + unsigned long link_transition_jiffies; + + /* Tuning */ + u8 orig_cacheline_size; /* value when loaded */ +#define CAS_PREF_CACHELINE_SIZE 0x20 /* Minimum desired */ + + /* Diagnostic counters and state. */ + int casreg_len; /* reg-space size for dumping */ + u64 pause_entered; + u16 pause_last_time_recvd; + + dma_addr_t block_dvma, tx_tiny_dvma[N_TX_RINGS]; + struct pci_dev *pdev; + struct net_device *dev; +}; + +#define TX_DESC_NEXT(r, x) (((x) + 1) & (TX_DESC_RINGN_SIZE(r) - 1)) +#define RX_DESC_ENTRY(r, x) ((x) & (RX_DESC_RINGN_SIZE(r) - 1)) +#define RX_COMP_ENTRY(r, x) ((x) & (RX_COMP_RINGN_SIZE(r) - 1)) + +#define TX_BUFF_COUNT(r, x, y) ((x) <= (y) ? ((y) - (x)) : \ + (TX_DESC_RINGN_SIZE(r) - (x) + (y))) + +#define TX_BUFFS_AVAIL(cp, i) ((cp)->tx_old[(i)] <= (cp)->tx_new[(i)] ? \ + (cp)->tx_old[(i)] + (TX_DESC_RINGN_SIZE(i) - 1) - (cp)->tx_new[(i)] : \ + (cp)->tx_old[(i)] - (cp)->tx_new[(i)] - 1) + +#define CAS_ALIGN(addr, align) \ + (((unsigned long) (addr) + ((align) - 1UL)) & ~((align) - 1)) + +#define RX_FIFO_SIZE 16384 +#define EXPANSION_ROM_SIZE 65536 + +#define CAS_MC_EXACT_MATCH_SIZE 15 +#define CAS_MC_HASH_SIZE 256 +#define CAS_MC_HASH_MAX (CAS_MC_EXACT_MATCH_SIZE + \ + CAS_MC_HASH_SIZE) + +#define TX_TARGET_ABORT_LEN 0x20 +#define RX_SWIVEL_OFF_VAL 0x2 +#define RX_AE_FREEN_VAL(x) (RX_DESC_RINGN_SIZE(x) >> 1) +#define RX_AE_COMP_VAL (RX_COMP_RING_SIZE >> 1) +#define RX_BLANK_INTR_PKT_VAL 0x05 +#define RX_BLANK_INTR_TIME_VAL 0x0F +#define HP_TCP_THRESH_VAL 1530 /* reduce to enable reassembly */ + +#define RX_SPARE_COUNT (RX_DESC_RING_SIZE >> 1) +#define RX_SPARE_RECOVER_VAL (RX_SPARE_COUNT >> 2) + +#endif /* _CASSINI_H */ diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 0de3bb90617..14e9b6315f2 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1875,6 +1875,9 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) rc = -ENODEV; goto bail; } + + /* Disable any PHY features not supported by the platform */ + ep->phy_mii.def->features &= ~emacdata->phy_feat_exc; /* Setup initial PHY config & startup aneg */ if (ep->phy_mii.def->ops->init) @@ -1882,6 +1885,34 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) netif_carrier_off(ndev); if (ep->phy_mii.def->features & SUPPORTED_Autoneg) ep->want_autoneg = 1; + else { + ep->want_autoneg = 0; + + /* Select highest supported speed/duplex */ + if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) { + ep->phy_mii.speed = SPEED_1000; + ep->phy_mii.duplex = DUPLEX_FULL; + } else if (ep->phy_mii.def->features & + SUPPORTED_1000baseT_Half) { + ep->phy_mii.speed = SPEED_1000; + ep->phy_mii.duplex = DUPLEX_HALF; + } else if (ep->phy_mii.def->features & + SUPPORTED_100baseT_Full) { + ep->phy_mii.speed = SPEED_100; + ep->phy_mii.duplex = DUPLEX_FULL; + } else if (ep->phy_mii.def->features & + SUPPORTED_100baseT_Half) { + ep->phy_mii.speed = SPEED_100; + ep->phy_mii.duplex = DUPLEX_HALF; + } else if (ep->phy_mii.def->features & + SUPPORTED_10baseT_Full) { + ep->phy_mii.speed = SPEED_10; + ep->phy_mii.duplex = DUPLEX_FULL; + } else { + ep->phy_mii.speed = SPEED_10; + ep->phy_mii.duplex = DUPLEX_HALF; + } + } emac_start_link(ep, NULL); /* read the MAC Address */ diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 32d5fabd4b1..a2c4dd4fb22 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -99,7 +99,7 @@ static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*); #ifdef CONFIG_PROC_FS -#define IBMVETH_PROC_DIR "ibmveth" +#define IBMVETH_PROC_DIR "net/ibmveth" static struct proc_dir_entry *ibmveth_proc_dir; #endif @@ -1010,7 +1010,7 @@ static int __devexit ibmveth_remove(struct vio_dev *dev) #ifdef CONFIG_PROC_FS static void ibmveth_proc_register_driver(void) { - ibmveth_proc_dir = create_proc_entry(IBMVETH_PROC_DIR, S_IFDIR, proc_net); + ibmveth_proc_dir = proc_mkdir(IBMVETH_PROC_DIR, NULL); if (ibmveth_proc_dir) { SET_MODULE_OWNER(ibmveth_proc_dir); } @@ -1018,7 +1018,7 @@ static void ibmveth_proc_register_driver(void) static void ibmveth_proc_unregister_driver(void) { - remove_proc_entry(IBMVETH_PROC_DIR, proc_net); + remove_proc_entry(IBMVETH_PROC_DIR, NULL); } static void *ibmveth_seq_start(struct seq_file *seq, loff_t *pos) diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index 6d9de626c96..651c5a6578f 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -1875,11 +1875,11 @@ static int __init vlsi_mod_init(void) sirpulse = !!sirpulse; - /* create_proc_entry returns NULL if !CONFIG_PROC_FS. + /* proc_mkdir returns NULL if !CONFIG_PROC_FS. * Failure to create the procfs entry is handled like running * without procfs - it's not required for the driver to work. */ - vlsi_proc_root = create_proc_entry(PROC_DIR, S_IFDIR, NULL); + vlsi_proc_root = proc_mkdir(PROC_DIR, NULL); if (vlsi_proc_root) { /* protect registered procdir against module removal. * Because we are in the module init path there's no race diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index e64df4d0800..e4811b42a6b 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -584,7 +584,7 @@ static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) return 0; } -static inline int rx_refill(struct net_device *ndev, int gfp) +static inline int rx_refill(struct net_device *ndev, gfp_t gfp) { struct ns83820 *dev = PRIV(ndev); unsigned i; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index d652e1eddb4..c7cca842e5e 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -1832,7 +1832,7 @@ static void fill_multicast_tbl(int count, struct dev_mc_list *addrs, { struct dev_mc_list *mc_addr; - for (mc_addr = addrs; mc_addr && --count > 0; mc_addr = mc_addr->next) { + for (mc_addr = addrs; mc_addr && count-- > 0; mc_addr = mc_addr->next) { u_int position = ether_crc(6, mc_addr->dmi_addr); #ifndef final_version /* Verify multicast address. */ if ((mc_addr->dmi_addr[0] & 1) == 0) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 82f236cc3b9..a842ecc60a3 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -1070,7 +1070,7 @@ static int __init pppoe_proc_init(void) { struct proc_dir_entry *p; - p = create_proc_entry("pppoe", S_IRUGO, proc_net); + p = create_proc_entry("net/pppoe", S_IRUGO, NULL); if (!p) return -ENOMEM; @@ -1142,7 +1142,7 @@ static void __exit pppoe_exit(void) dev_remove_pack(&pppoes_ptype); dev_remove_pack(&pppoed_ptype); unregister_netdevice_notifier(&pppoe_notifier); - remove_proc_entry("pppoe", proc_net); + remove_proc_entry("net/pppoe", NULL); proto_unregister(&pppoe_sk_proto); } diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index f9223c1c5aa..afb3f186b88 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -92,8 +92,7 @@ VERSION 2.2LK <2005/01/25> #endif /* RTL8169_DEBUG */ #define R8169_MSG_DEFAULT \ - (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | \ - NETIF_MSG_IFDOWN) + (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN) #define TX_BUFFS_AVAIL(tp) \ (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1) diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 2e72d79a143..b18c92cb629 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -235,7 +235,7 @@ static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr); * Extern Function Prototypes * ******************************************************************************/ -static const char SKRootName[] = "sk98lin"; +static const char SKRootName[] = "net/sk98lin"; static struct proc_dir_entry *pSkRootDir; extern struct file_operations sk_proc_fops; @@ -5242,20 +5242,20 @@ static int __init skge_init(void) { int error; - pSkRootDir = proc_mkdir(SKRootName, proc_net); + pSkRootDir = proc_mkdir(SKRootName, NULL); if (pSkRootDir) pSkRootDir->owner = THIS_MODULE; error = pci_register_driver(&skge_driver); if (error) - proc_net_remove(SKRootName); + remove_proc_entry(SKRootName, NULL); return error; } static void __exit skge_exit(void) { pci_unregister_driver(&skge_driver); - proc_net_remove(SKRootName); + remove_proc_entry(SKRootName, NULL); } diff --git a/drivers/net/skge.c b/drivers/net/skge.c index fd398da4993..c2e6484ef13 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2837,21 +2837,29 @@ static void skge_netpoll(struct net_device *dev) static int skge_set_mac_address(struct net_device *dev, void *p) { struct skge_port *skge = netdev_priv(dev); - struct sockaddr *addr = p; - int err = 0; + struct skge_hw *hw = skge->hw; + unsigned port = skge->port; + const struct sockaddr *addr = p; if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - skge_down(dev); + spin_lock_bh(&hw->phy_lock); memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); - memcpy_toio(skge->hw->regs + B2_MAC_1 + skge->port*8, + memcpy_toio(hw->regs + B2_MAC_1 + port*8, dev->dev_addr, ETH_ALEN); - memcpy_toio(skge->hw->regs + B2_MAC_2 + skge->port*8, + memcpy_toio(hw->regs + B2_MAC_2 + port*8, dev->dev_addr, ETH_ALEN); - if (dev->flags & IFF_UP) - err = skge_up(dev); - return err; + + if (hw->chip_id == CHIP_ID_GENESIS) + xm_outaddr(hw, port, XM_SA, dev->dev_addr); + else { + gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr); + gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr); + } + spin_unlock_bh(&hw->phy_lock); + + return 0; } static const struct { diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 88b89dc95c7..efdb179ecc8 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -133,14 +133,18 @@ - finally added firmware (GPL'ed by Adaptec) - removed compatibility code for 2.2.x + LK1.4.2.1 (Ion Badulescu) + - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM + - added 32-bit padding to outgoing skb's, removed previous workaround + TODO: - fix forced speed/duplexing code (broken a long time ago, when somebody converted the driver to use the generic MII code) - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.2" -#define DRV_RELDATE "January 19, 2005" +#define DRV_VERSION "1.03+LK1.4.2.1" +#define DRV_RELDATE "October 3, 2005" #include <linux/config.h> #include <linux/version.h> @@ -165,6 +169,14 @@ TODO: - fix forced speed/duplexing code (broken a long time ago, when * of length 1. If and when this is fixed, the #define below can be removed. */ #define HAS_BROKEN_FIRMWARE + +/* + * If using the broken firmware, data must be padded to the next 32-bit boundary. + */ +#ifdef HAS_BROKEN_FIRMWARE +#define PADDING_MASK 3 +#endif + /* * Define this if using the driver with the zero-copy patch */ @@ -257,9 +269,10 @@ static int full_duplex[MAX_UNITS] = {0, }; * This SUCKS. * We need a much better method to determine if dma_addr_t is 64-bit. */ -#if (defined(__i386__) && defined(CONFIG_HIGHMEM) && (LINUX_VERSION_CODE > 0x20500 || defined(CONFIG_HIGHMEM64G))) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) +#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) /* 64-bit dma_addr_t */ #define ADDR_64BITS /* This chip uses 64 bit addresses. */ +#define netdrv_addr_t u64 #define cpu_to_dma(x) cpu_to_le64(x) #define dma_to_cpu(x) le64_to_cpu(x) #define RX_DESC_Q_ADDR_SIZE RxDescQAddr64bit @@ -268,6 +281,7 @@ static int full_duplex[MAX_UNITS] = {0, }; #define TX_COMPL_Q_ADDR_SIZE TxComplQAddr64bit #define RX_DESC_ADDR_SIZE RxDescAddr64bit #else /* 32-bit dma_addr_t */ +#define netdrv_addr_t u32 #define cpu_to_dma(x) cpu_to_le32(x) #define dma_to_cpu(x) le32_to_cpu(x) #define RX_DESC_Q_ADDR_SIZE RxDescQAddr32bit @@ -1333,21 +1347,10 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) } #if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE) - { - int has_bad_length = 0; - - if (skb_first_frag_len(skb) == 1) - has_bad_length = 1; - else { - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) - if (skb_shinfo(skb)->frags[i].size == 1) { - has_bad_length = 1; - break; - } - } - - if (has_bad_length) - skb_checksum_help(skb, 0); + if (skb->ip_summed == CHECKSUM_HW) { + skb = skb_padto(skb, (skb->len + PADDING_MASK) & ~PADDING_MASK); + if (skb == NULL) + return NETDEV_TX_OK; } #endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ @@ -2127,13 +2130,12 @@ static int __init starfire_init (void) #endif #endif -#ifndef ADDR_64BITS /* we can do this test only at run-time... sigh */ - if (sizeof(dma_addr_t) == sizeof(u64)) { - printk("This driver has not been ported to this 64-bit architecture yet\n"); + if (sizeof(dma_addr_t) != sizeof(netdrv_addr_t)) { + printk("This driver has dma_addr_t issues, please send email to maintainer\n"); return -ENODEV; } -#endif /* not ADDR_64BITS */ + return pci_module_init (&starfire_driver); } diff --git a/drivers/net/sungem.h b/drivers/net/sungem.h index ff8ae5f7997..13006d759ad 100644 --- a/drivers/net/sungem.h +++ b/drivers/net/sungem.h @@ -1035,7 +1035,8 @@ struct gem { #define ALIGNED_RX_SKB_ADDR(addr) \ ((((unsigned long)(addr) + (64UL - 1UL)) & ~(64UL - 1UL)) - (unsigned long)(addr)) -static __inline__ struct sk_buff *gem_alloc_skb(int size, int gfp_flags) +static __inline__ struct sk_buff *gem_alloc_skb(int size, + gfp_t gfp_flags) { struct sk_buff *skb = alloc_skb(size + 64, gfp_flags); diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 25f85fb9df4..1802c3b4879 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -67,8 +67,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.41" -#define DRV_MODULE_RELDATE "September 27, 2005" +#define DRV_MODULE_VERSION "3.42" +#define DRV_MODULE_RELDATE "Oct 3, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -9284,8 +9284,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) static struct pci_device_id write_reorder_chipsets[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_K8_NB) }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8385_0) }, { }, }; u32 misc_ctrl_reg; @@ -9300,15 +9300,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) tp->tg3_flags2 |= TG3_FLG2_SUN_570X; #endif - /* If we have an AMD 762 or K8 chipset, write - * reordering to the mailbox registers done by the host - * controller can cause major troubles. We read back from - * every mailbox register write to force the writes to be - * posted to the chip in order. - */ - if (pci_dev_present(write_reorder_chipsets)) - tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER; - /* Force memory write invalidate off. If we leave it on, * then on 5700_BX chips we have to enable a workaround. * The workaround is to set the TG3PCI_DMA_RW_CTRL boundary @@ -9439,6 +9430,16 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0) tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS; + /* If we have an AMD 762 or VIA K8T800 chipset, write + * reordering to the mailbox registers done by the host + * controller can cause major troubles. We read back from + * every mailbox register write to force the writes to be + * posted to the chip in order. + */ + if (pci_dev_present(write_reorder_chipsets) && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) + tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 && tp->pci_lat_timer < 64) { tp->pci_lat_timer = 64; diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index e7b001017b9..32057e65808 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -531,7 +531,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) if (!time_after(jiffies, timeout)) continue; DPRINTK( "Hardware timeout during initialization.\n"); iounmap(t_mmio); - kfree(ti); return -ENODEV; } ti->sram_phys = @@ -645,7 +644,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) DPRINTK("Unknown shared ram paging info %01X\n", ti->shared_ram_paging); iounmap(t_mmio); - kfree(ti); return -ENODEV; break; } /*end switch shared_ram_paging */ @@ -675,7 +673,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) "driver limit (%05x), adapter not started.\n", chk_base, ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE); iounmap(t_mmio); - kfree(ti); return -ENODEV; } else { /* seems cool, record what we have figured out */ ti->sram_base = new_base >> 12; @@ -690,7 +687,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) DPRINTK("Could not grab irq %d. Halting Token Ring driver.\n", irq); iounmap(t_mmio); - kfree(ti); return -ENODEV; } /*?? Now, allocate some of the PIO PORTs for this driver.. */ @@ -699,7 +695,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) DPRINTK("Could not grab PIO range. Halting driver.\n"); free_irq(dev->irq, dev); iounmap(t_mmio); - kfree(ti); return -EBUSY; } diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 5db694c4eb0..683f14b01c0 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -172,7 +172,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5) int i; for (i = 0; i < tp->mtable->leafcount; i++) if (tp->mtable->mleaf[i].media == dev->if_port) { - int startup = ! ((tp->chip_id == DC21143 && tp->revision == 65)); + int startup = ! ((tp->chip_id == DC21143 && (tp->revision == 48 || tp->revision == 65))); tp->cur_index = i; tulip_select_media(dev, startup); setup_done = 1; diff --git a/drivers/net/wan/sdlamain.c b/drivers/net/wan/sdlamain.c index 74e151acef3..7a8b22a7ea3 100644 --- a/drivers/net/wan/sdlamain.c +++ b/drivers/net/wan/sdlamain.c @@ -57,6 +57,7 @@ #include <linux/ioport.h> /* request_region(), release_region() */ #include <linux/wanrouter.h> /* WAN router definitions */ #include <linux/wanpipe.h> /* WANPIPE common user API definitions */ +#include <linux/rcupdate.h> #include <linux/in.h> #include <asm/io.h> /* phys_to_virt() */ @@ -1268,37 +1269,41 @@ unsigned long get_ip_address(struct net_device *dev, int option) struct in_ifaddr *ifaddr; struct in_device *in_dev; + unsigned long addr = 0; - if ((in_dev = __in_dev_get(dev)) == NULL){ - return 0; + rcu_read_lock(); + if ((in_dev = __in_dev_get_rcu(dev)) == NULL){ + goto out; } if ((ifaddr = in_dev->ifa_list)== NULL ){ - return 0; + goto out; } switch (option){ case WAN_LOCAL_IP: - return ifaddr->ifa_local; + addr = ifaddr->ifa_local; break; case WAN_POINTOPOINT_IP: - return ifaddr->ifa_address; + addr = ifaddr->ifa_address; break; case WAN_NETMASK_IP: - return ifaddr->ifa_mask; + addr = ifaddr->ifa_mask; break; case WAN_BROADCAST_IP: - return ifaddr->ifa_broadcast; + addr = ifaddr->ifa_broadcast; break; default: - return 0; + break; } - return 0; +out: + rcu_read_unlock(); + return addr; } void add_gateway(sdla_t *card, struct net_device *dev) diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index b56a7b516d2..a6d3b55013a 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -769,7 +769,7 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) u32 addr = 0, mask = ~0; /* FIXME: is the mask correct? */ #ifdef CONFIG_INET rcu_read_lock(); - if ((in_dev = __in_dev_get(dev)) != NULL) + if ((in_dev = __in_dev_get_rcu(dev)) != NULL) { for (ifa=in_dev->ifa_list; ifa != NULL; ifa=ifa->ifa_next) { diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 6deb7cc810c..cf3daaa1b36 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -503,9 +503,14 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - /* Length of the packet body */ - /* FIXME: what if the skb is smaller than this? */ - len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN); + /* Check packet length, pad short packets, round up odd length */ + len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN); + if (skb->len < len) { + skb = skb_padto(skb, len); + if (skb == NULL) + goto fail; + } + len -= ETH_HLEN; eh = (struct ethhdr *)skb->data; @@ -557,8 +562,7 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) p = skb->data; } - /* Round up for odd length packets */ - err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), + err = hermes_bap_pwrite(hw, USER_BAP, p, data_len, txfid, data_off); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 4b0acae22b0..7bc7fc82312 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -1352,7 +1352,7 @@ static unsigned char *strip_make_packet(unsigned char *buffer, struct in_device *in_dev; rcu_read_lock(); - in_dev = __in_dev_get(strip_info->dev); + in_dev = __in_dev_get_rcu(strip_info->dev); if (in_dev == NULL) { rcu_read_unlock(); return NULL; @@ -1508,7 +1508,7 @@ static void strip_send(struct strip *strip_info, struct sk_buff *skb) brd = addr = 0; rcu_read_lock(); - in_dev = __in_dev_get(strip_info->dev); + in_dev = __in_dev_get_rcu(strip_info->dev); if (in_dev) { if (in_dev->ifa_list) { brd = in_dev->ifa_list->ifa_broadcast; diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c index e90fb72a696..286902298e3 100644 --- a/drivers/parisc/led.c +++ b/drivers/parisc/led.c @@ -37,6 +37,7 @@ #include <linux/proc_fs.h> #include <linux/ctype.h> #include <linux/blkdev.h> +#include <linux/rcupdate.h> #include <asm/io.h> #include <asm/processor.h> #include <asm/hardware.h> @@ -358,9 +359,10 @@ static __inline__ int led_get_net_activity(void) /* we are running as tasklet, so locking dev_base * for reading should be OK */ read_lock(&dev_base_lock); + rcu_read_lock(); for (dev = dev_base; dev; dev = dev->next) { struct net_device_stats *stats; - struct in_device *in_dev = __in_dev_get(dev); + struct in_device *in_dev = __in_dev_get_rcu(dev); if (!in_dev || !in_dev->ifa_list) continue; if (LOOPBACK(in_dev->ifa_list->ifa_local)) @@ -371,6 +373,7 @@ static __inline__ int led_get_net_activity(void) rx_total += stats->rx_packets; tx_total += stats->tx_packets; } + rcu_read_unlock(); read_unlock(&dev_base_lock); retval = 0; diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index fabd3529ceb..d5e76423a0e 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -689,6 +689,9 @@ static int pccardd(void *__skt) schedule(); try_to_freeze(); } + /* make sure we are running before we exit */ + set_current_state(TASK_RUNNING); + remove_wait_queue(&skt->thread_wait, &wait); /* remove from the device core */ diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index 08d1c928826..94be9e51654 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -22,7 +22,6 @@ #include <asm/hardware.h> #include <asm/io.h> -#include <asm/mach-types.h> #include <asm/sizes.h> #include <asm/arch/mux.h> diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index c42455d20eb..f9a5c70284b 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -691,7 +691,7 @@ static int adjust_memory(struct pcmcia_socket *s, unsigned int action, unsigned unsigned long size = end - start + 1; int ret = 0; - if (end <= start) + if (end < start) return -EINVAL; down(&rsrc_sem); @@ -724,7 +724,7 @@ static int adjust_io(struct pcmcia_socket *s, unsigned int action, unsigned long unsigned long size = end - start + 1; int ret = 0; - if (end <= start) + if (end < start) return -EINVAL; if (end > IO_SPACE_LIMIT) @@ -817,7 +817,7 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s) /* if we got at least one of IO, and one of MEM, we can be glad and * activate the PCMCIA subsystem */ - if (done & (IORESOURCE_MEM | IORESOURCE_IO)) + if (done == (IORESOURCE_MEM | IORESOURCE_IO)) s->resource_setup_done = 1; return 0; @@ -925,7 +925,7 @@ static ssize_t store_io_db(struct class_device *class_dev, const char *buf, size return -EINVAL; } } - if (end_addr <= start_addr) + if (end_addr < start_addr) return -EINVAL; ret = adjust_io(s, add, start_addr, end_addr); @@ -977,7 +977,7 @@ static ssize_t store_mem_db(struct class_device *class_dev, const char *buf, siz return -EINVAL; } } - if (end_addr <= start_addr) + if (end_addr < start_addr) return -EINVAL; ret = adjust_memory(s, add, start_addr, end_addr); diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index da0b404561c..539b5cd1a59 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -873,6 +873,7 @@ static int ti1250_override(struct yenta_socket *socket) * Some fixup code to make everybody happy (TM). */ +#ifdef CONFIG_CARDBUS /** * set/clear various test bits: * Defaults to clear the bit. @@ -927,7 +928,6 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus) config_writeb(socket, ENE_TEST_C9, test_c9); } - static int ene_override(struct yenta_socket *socket) { /* install tune_bridge() function */ @@ -935,6 +935,9 @@ static int ene_override(struct yenta_socket *socket) return ti1250_override(socket); } +#else +# define ene_override ti1250_override +#endif #endif /* _LINUX_TI113X_H */ diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 14c76f5e417..9adc11e8b8b 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -544,7 +544,7 @@ get_disc_ccwdev_by_devno(unsigned int devno, struct ccw_device *sibling) .sibling = sibling, }; - dev = bus_find_device(&css_bus_type, NULL, &data, match_devno); + dev = bus_find_device(&ccw_bus_type, NULL, &data, match_devno); return dev ? to_ccwdev(dev) : NULL; } diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h index 2ad4797ce02..9963479ba89 100644 --- a/drivers/s390/net/qeth.h +++ b/drivers/s390/net/qeth.h @@ -686,6 +686,7 @@ struct qeth_seqno { __u32 pdu_hdr; __u32 pdu_hdr_ack; __u16 ipa; + __u32 pkt_seqno; }; struct qeth_reply { @@ -848,6 +849,7 @@ qeth_realloc_headroom(struct qeth_card *card, struct sk_buff **skb, int size) "on interface %s", QETH_CARD_IFNAME(card)); return -ENOMEM; } + kfree_skb(*skb); *skb = new_skb; } return 0; diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 86582cf1e19..bd28e2438d7 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -511,7 +511,7 @@ static int __qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode) { struct qeth_card *card = (struct qeth_card *) cgdev->dev.driver_data; - int rc = 0; + int rc = 0, rc2 = 0, rc3 = 0; enum qeth_card_states recover_flag; QETH_DBF_TEXT(setup, 3, "setoffl"); @@ -523,11 +523,13 @@ __qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode) CARD_BUS_ID(card)); return -ERESTARTSYS; } - if ((rc = ccw_device_set_offline(CARD_DDEV(card))) || - (rc = ccw_device_set_offline(CARD_WDEV(card))) || - (rc = ccw_device_set_offline(CARD_RDEV(card)))) { + rc = ccw_device_set_offline(CARD_DDEV(card)); + rc2 = ccw_device_set_offline(CARD_WDEV(card)); + rc3 = ccw_device_set_offline(CARD_RDEV(card)); + if (!rc) + rc = (rc2) ? rc2 : rc3; + if (rc) QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - } if (recover_flag == CARD_STATE_UP) card->state = CARD_STATE_RECOVER; qeth_notify_processes(); @@ -1046,6 +1048,7 @@ qeth_setup_card(struct qeth_card *card) spin_lock_init(&card->vlanlock); card->vlangrp = NULL; #endif + spin_lock_init(&card->lock); spin_lock_init(&card->ip_lock); spin_lock_init(&card->thread_mask_lock); card->thread_start_mask = 0; @@ -1626,16 +1629,6 @@ qeth_cmd_timeout(unsigned long data) spin_unlock_irqrestore(&reply->card->lock, flags); } -static void -qeth_reset_ip_addresses(struct qeth_card *card) -{ - QETH_DBF_TEXT(trace, 2, "rstipadd"); - - qeth_clear_ip_list(card, 0, 1); - /* this function will also schedule the SET_IP_THREAD */ - qeth_set_multicast_list(card->dev); -} - static struct qeth_ipa_cmd * qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) { @@ -1664,9 +1657,8 @@ qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) "IP address reset.\n", QETH_CARD_IFNAME(card), card->info.chpid); - card->lan_online = 1; netif_carrier_on(card->dev); - qeth_reset_ip_addresses(card); + qeth_schedule_recovery(card); return NULL; case IPA_CMD_REGISTER_LOCAL_ADDR: QETH_DBF_TEXT(trace,3, "irla"); @@ -2387,6 +2379,7 @@ qeth_layer2_rebuild_skb(struct qeth_card *card, struct sk_buff *skb, skb_pull(skb, VLAN_HLEN); } #endif + *((__u32 *)skb->cb) = ++card->seqno.pkt_seqno; return vlan_id; } @@ -3014,7 +3007,7 @@ qeth_alloc_buffer_pool(struct qeth_card *card) return -ENOMEM; } for(j = 0; j < QETH_MAX_BUFFER_ELEMENTS(card); ++j){ - ptr = (void *) __get_free_page(GFP_KERNEL); + ptr = (void *) __get_free_page(GFP_KERNEL|GFP_DMA); if (!ptr) { while (j > 0) free_page((unsigned long) @@ -3058,7 +3051,8 @@ qeth_alloc_qdio_buffers(struct qeth_card *card) if (card->qdio.state == QETH_QDIO_ALLOCATED) return 0; - card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), GFP_KERNEL); + card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), + GFP_KERNEL|GFP_DMA); if (!card->qdio.in_q) return - ENOMEM; QETH_DBF_TEXT(setup, 2, "inq"); @@ -3083,7 +3077,7 @@ qeth_alloc_qdio_buffers(struct qeth_card *card) } for (i = 0; i < card->qdio.no_out_queues; ++i){ card->qdio.out_qs[i] = kmalloc(sizeof(struct qeth_qdio_out_q), - GFP_KERNEL); + GFP_KERNEL|GFP_DMA); if (!card->qdio.out_qs[i]){ while (i > 0) kfree(card->qdio.out_qs[--i]); @@ -5200,7 +5194,7 @@ qeth_free_vlan_addresses4(struct qeth_card *card, unsigned short vid) if (!card->vlangrp) return; rcu_read_lock(); - in_dev = __in_dev_get(card->vlangrp->vlan_devices[vid]); + in_dev = __in_dev_get_rcu(card->vlangrp->vlan_devices[vid]); if (!in_dev) goto out; for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) { @@ -6470,6 +6464,9 @@ qeth_query_ipassists_cb(struct qeth_card *card, struct qeth_reply *reply, if (cmd->hdr.prot_version == QETH_PROT_IPV4) { card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; + /* Disable IPV6 support hard coded for Hipersockets */ + if(card->info.type == QETH_CARD_TYPE_IQD) + card->options.ipa4.supported_funcs &= ~IPA_IPV6; } else { #ifdef CONFIG_QETH_IPV6 card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; @@ -7725,7 +7722,7 @@ qeth_arp_constructor(struct neighbour *neigh) goto out; rcu_read_lock(); - in_dev = rcu_dereference(__in_dev_get(dev)); + in_dev = __in_dev_get_rcu(dev); if (in_dev == NULL) { rcu_read_unlock(); return -EINVAL; diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 0b5087f7cab..cab098556b4 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -833,7 +833,7 @@ zfcp_unit_dequeue(struct zfcp_unit *unit) } static void * -zfcp_mempool_alloc(unsigned int __nocast gfp_mask, void *size) +zfcp_mempool_alloc(gfp_t gfp_mask, void *size) { return kmalloc((size_t) size, gfp_mask); } diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index a6ac61611f3..a748fbfb669 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -60,6 +60,7 @@ Remove un-needed eh_abort handler. Add support for embedded firmware error strings. 2.26.02.003 - Correctly handle single sgl's with use_sg=1. + 2.26.02.004 - Add support for 9550SX controllers. */ #include <linux/module.h> @@ -82,7 +83,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.003" +#define TW_DRIVER_VERSION "2.26.02.004" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -892,11 +893,6 @@ static int twa_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value) writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); } - if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) { - TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "SBUF Write Error: clearing"); - writel(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); - } - if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) { if (tw_dev->reset_print == 0) { TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Microcontroller Error: clearing"); @@ -930,6 +926,36 @@ out: return retval; } /* End twa_empty_response_queue() */ +/* This function will clear the pchip/response queue on 9550SX */ +static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev) +{ + u32 status_reg_value, response_que_value; + int count = 0, retval = 1; + + if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) { + status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev)); + + while (((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) && (count < TW_MAX_RESPONSE_DRAIN)) { + response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev)); + if ((response_que_value & TW_9550SX_DRAIN_COMPLETED) == TW_9550SX_DRAIN_COMPLETED) { + /* P-chip settle time */ + msleep(500); + retval = 0; + goto out; + } + status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev)); + count++; + } + if (count == TW_MAX_RESPONSE_DRAIN) + goto out; + + retval = 0; + } else + retval = 0; +out: + return retval; +} /* End twa_empty_response_queue_large() */ + /* This function passes sense keys from firmware to scsi layer */ static int twa_fill_sense(TW_Device_Extension *tw_dev, int request_id, int copy_sense, int print_host) { @@ -1613,8 +1639,16 @@ static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset) int tries = 0, retval = 1, flashed = 0, do_soft_reset = soft_reset; while (tries < TW_MAX_RESET_TRIES) { - if (do_soft_reset) + if (do_soft_reset) { TW_SOFT_RESET(tw_dev); + /* Clear pchip/response queue on 9550SX */ + if (twa_empty_response_queue_large(tw_dev)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x36, "Response queue (large) empty failed during reset sequence"); + do_soft_reset = 1; + tries++; + continue; + } + } /* Make sure controller is in a good state */ if (twa_poll_status(tw_dev, TW_STATUS_MICROCONTROLLER_READY | (do_soft_reset == 1 ? TW_STATUS_ATTENTION_INTERRUPT : 0), 60)) { @@ -2034,7 +2068,10 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id goto out_free_device_extension; } - mem_addr = pci_resource_start(pdev, 1); + if (pdev->device == PCI_DEVICE_ID_3WARE_9000) + mem_addr = pci_resource_start(pdev, 1); + else + mem_addr = pci_resource_start(pdev, 2); /* Save base address */ tw_dev->base_addr = ioremap(mem_addr, PAGE_SIZE); @@ -2148,6 +2185,8 @@ static void twa_remove(struct pci_dev *pdev) static struct pci_device_id twa_pci_tbl[] __devinitdata = { { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { } }; MODULE_DEVICE_TABLE(pci, twa_pci_tbl); diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h index 8c8ecbed3b5..46f22cdc829 100644 --- a/drivers/scsi/3w-9xxx.h +++ b/drivers/scsi/3w-9xxx.h @@ -267,7 +267,6 @@ static twa_message_type twa_error_table[] = { #define TW_CONTROL_CLEAR_PARITY_ERROR 0x00800000 #define TW_CONTROL_CLEAR_QUEUE_ERROR 0x00400000 #define TW_CONTROL_CLEAR_PCI_ABORT 0x00100000 -#define TW_CONTROL_CLEAR_SBUF_WRITE_ERROR 0x00000008 /* Status register bit definitions */ #define TW_STATUS_MAJOR_VERSION_MASK 0xF0000000 @@ -285,9 +284,8 @@ static twa_message_type twa_error_table[] = { #define TW_STATUS_MICROCONTROLLER_READY 0x00002000 #define TW_STATUS_COMMAND_QUEUE_EMPTY 0x00001000 #define TW_STATUS_EXPECTED_BITS 0x00002000 -#define TW_STATUS_UNEXPECTED_BITS 0x00F00008 -#define TW_STATUS_SBUF_WRITE_ERROR 0x00000008 -#define TW_STATUS_VALID_INTERRUPT 0x00DF0008 +#define TW_STATUS_UNEXPECTED_BITS 0x00F00000 +#define TW_STATUS_VALID_INTERRUPT 0x00DF0000 /* RESPONSE QUEUE BIT DEFINITIONS */ #define TW_RESPONSE_ID_MASK 0x00000FF0 @@ -324,9 +322,9 @@ static twa_message_type twa_error_table[] = { /* Compatibility defines */ #define TW_9000_ARCH_ID 0x5 -#define TW_CURRENT_DRIVER_SRL 28 -#define TW_CURRENT_DRIVER_BUILD 9 -#define TW_CURRENT_DRIVER_BRANCH 4 +#define TW_CURRENT_DRIVER_SRL 30 +#define TW_CURRENT_DRIVER_BUILD 80 +#define TW_CURRENT_DRIVER_BRANCH 0 /* Phase defines */ #define TW_PHASE_INITIAL 0 @@ -334,6 +332,7 @@ static twa_message_type twa_error_table[] = { #define TW_PHASE_SGLIST 2 /* Misc defines */ +#define TW_9550SX_DRAIN_COMPLETED 0xFFFF #define TW_SECTOR_SIZE 512 #define TW_ALIGNMENT_9000 4 /* 4 bytes */ #define TW_ALIGNMENT_9000_SGL 0x3 @@ -417,6 +416,9 @@ static twa_message_type twa_error_table[] = { #ifndef PCI_DEVICE_ID_3WARE_9000 #define PCI_DEVICE_ID_3WARE_9000 0x1002 #endif +#ifndef PCI_DEVICE_ID_3WARE_9550SX +#define PCI_DEVICE_ID_3WARE_9550SX 0x1003 +#endif /* Bitmask macros to eliminate bitfields */ @@ -443,6 +445,7 @@ static twa_message_type twa_error_table[] = { #define TW_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0x4) #define TW_COMMAND_QUEUE_REG_ADDR(x) (sizeof(dma_addr_t) > 4 ? ((unsigned char __iomem *)x->base_addr + 0x20) : ((unsigned char __iomem *)x->base_addr + 0x8)) #define TW_RESPONSE_QUEUE_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0xC) +#define TW_RESPONSE_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x30) #define TW_CLEAR_ALL_INTERRUPTS(x) (writel(TW_STATUS_VALID_INTERRUPT, TW_CONTROL_REG_ADDR(x))) #define TW_CLEAR_ATTENTION_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT, TW_CONTROL_REG_ADDR(x))) #define TW_CLEAR_HOST_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_HOST_INTERRUPT, TW_CONTROL_REG_ADDR(x))) diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 1e4edbdf273..48529d180ca 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_SCSI_DC395x) += dc395x.o obj-$(CONFIG_SCSI_DC390T) += tmscsim.o obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ +obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index a8e3dfcd0dc..93416f760e5 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -313,18 +313,37 @@ int aac_get_containers(struct aac_dev *dev) } dresp = (struct aac_mount *)fib_data(fibptr); + if ((le32_to_cpu(dresp->status) == ST_OK) && + (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) { + dinfo->command = cpu_to_le32(VM_NameServe64); + dinfo->count = cpu_to_le32(index); + dinfo->type = cpu_to_le32(FT_FILESYS); + + if (fib_send(ContainerCommand, + fibptr, + sizeof(struct aac_query_mount), + FsaNormal, + 1, 1, + NULL, NULL) < 0) + continue; + } else + dresp->mnt[0].capacityhigh = 0; + dprintk ((KERN_DEBUG - "VM_NameServe cid=%d status=%d vol=%d state=%d cap=%u\n", + "VM_NameServe cid=%d status=%d vol=%d state=%d cap=%llu\n", (int)index, (int)le32_to_cpu(dresp->status), (int)le32_to_cpu(dresp->mnt[0].vol), (int)le32_to_cpu(dresp->mnt[0].state), - (unsigned)le32_to_cpu(dresp->mnt[0].capacity))); + ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + + (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32))); if ((le32_to_cpu(dresp->status) == ST_OK) && (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { fsa_dev_ptr[index].valid = 1; fsa_dev_ptr[index].type = le32_to_cpu(dresp->mnt[0].vol); - fsa_dev_ptr[index].size = le32_to_cpu(dresp->mnt[0].capacity); + fsa_dev_ptr[index].size + = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + + (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32); if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) fsa_dev_ptr[index].ro = 1; } @@ -460,7 +479,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid) * is updated in the struct fsa_dev_info structure rather than returned. */ -static int probe_container(struct aac_dev *dev, int cid) +int probe_container(struct aac_dev *dev, int cid) { struct fsa_dev_info *fsa_dev_ptr; int status; @@ -497,11 +516,29 @@ static int probe_container(struct aac_dev *dev, int cid) dresp = (struct aac_mount *) fib_data(fibptr); if ((le32_to_cpu(dresp->status) == ST_OK) && + (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) { + dinfo->command = cpu_to_le32(VM_NameServe64); + dinfo->count = cpu_to_le32(cid); + dinfo->type = cpu_to_le32(FT_FILESYS); + + if (fib_send(ContainerCommand, + fibptr, + sizeof(struct aac_query_mount), + FsaNormal, + 1, 1, + NULL, NULL) < 0) + goto error; + } else + dresp->mnt[0].capacityhigh = 0; + + if ((le32_to_cpu(dresp->status) == ST_OK) && (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { fsa_dev_ptr[cid].valid = 1; fsa_dev_ptr[cid].type = le32_to_cpu(dresp->mnt[0].vol); - fsa_dev_ptr[cid].size = le32_to_cpu(dresp->mnt[0].capacity); + fsa_dev_ptr[cid].size + = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + + (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32); if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) fsa_dev_ptr[cid].ro = 1; } @@ -655,7 +692,7 @@ int aac_get_adapter_info(struct aac_dev* dev) fibptr, sizeof(*info), FsaNormal, - 1, 1, + -1, 1, /* First `interrupt' command uses special wait */ NULL, NULL); @@ -806,8 +843,8 @@ int aac_get_adapter_info(struct aac_dev* dev) if (!(dev->raw_io_interface)) { dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size - sizeof(struct aac_fibhdr) - - sizeof(struct aac_write) + sizeof(struct sgmap)) / - sizeof(struct sgmap); + sizeof(struct aac_write) + sizeof(struct sgentry)) / + sizeof(struct sgentry); if (dev->dac_support) { /* * 38 scatter gather elements @@ -816,8 +853,8 @@ int aac_get_adapter_info(struct aac_dev* dev) (dev->max_fib_size - sizeof(struct aac_fibhdr) - sizeof(struct aac_write64) + - sizeof(struct sgmap64)) / - sizeof(struct sgmap64); + sizeof(struct sgentry64)) / + sizeof(struct sgentry64); } dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT; if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) { @@ -854,7 +891,40 @@ static void io_callback(void *context, struct fib * fibptr) dev = (struct aac_dev *)scsicmd->device->host->hostdata; cid = ID_LUN_TO_CONTAINER(scsicmd->device->id, scsicmd->device->lun); - dprintk((KERN_DEBUG "io_callback[cpu %d]: lba = %u, t = %ld.\n", smp_processor_id(), ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3], jiffies)); + if (nblank(dprintk(x))) { + u64 lba; + switch (scsicmd->cmnd[0]) { + case WRITE_6: + case READ_6: + lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | + (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; + break; + case WRITE_16: + case READ_16: + lba = ((u64)scsicmd->cmnd[2] << 56) | + ((u64)scsicmd->cmnd[3] << 48) | + ((u64)scsicmd->cmnd[4] << 40) | + ((u64)scsicmd->cmnd[5] << 32) | + ((u64)scsicmd->cmnd[6] << 24) | + (scsicmd->cmnd[7] << 16) | + (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; + break; + case WRITE_12: + case READ_12: + lba = ((u64)scsicmd->cmnd[2] << 24) | + (scsicmd->cmnd[3] << 16) | + (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; + break; + default: + lba = ((u64)scsicmd->cmnd[2] << 24) | + (scsicmd->cmnd[3] << 16) | + (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; + break; + } + printk(KERN_DEBUG + "io_callback[cpu %d]: lba = %llu, t = %ld.\n", + smp_processor_id(), (unsigned long long)lba, jiffies); + } if (fibptr == NULL) BUG(); @@ -895,7 +965,7 @@ static void io_callback(void *context, struct fib * fibptr) static int aac_read(struct scsi_cmnd * scsicmd, int cid) { - u32 lba; + u64 lba; u32 count; int status; @@ -907,23 +977,69 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) /* * Get block address and transfer length */ - if (scsicmd->cmnd[0] == READ_6) /* 6 byte command */ - { + switch (scsicmd->cmnd[0]) { + case READ_6: dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", cid)); - lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; + lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | + (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; count = scsicmd->cmnd[4]; if (count == 0) count = 256; - } else { + break; + case READ_16: + dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", cid)); + + lba = ((u64)scsicmd->cmnd[2] << 56) | + ((u64)scsicmd->cmnd[3] << 48) | + ((u64)scsicmd->cmnd[4] << 40) | + ((u64)scsicmd->cmnd[5] << 32) | + ((u64)scsicmd->cmnd[6] << 24) | + (scsicmd->cmnd[7] << 16) | + (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; + count = (scsicmd->cmnd[10] << 24) | + (scsicmd->cmnd[11] << 16) | + (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; + break; + case READ_12: + dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", cid)); + + lba = ((u64)scsicmd->cmnd[2] << 24) | + (scsicmd->cmnd[3] << 16) | + (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; + count = (scsicmd->cmnd[6] << 24) | + (scsicmd->cmnd[7] << 16) | + (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; + break; + default: dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", cid)); - lba = (scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; + lba = ((u64)scsicmd->cmnd[2] << 24) | + (scsicmd->cmnd[3] << 16) | + (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; + break; } - dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %u, t = %ld.\n", + dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n", smp_processor_id(), (unsigned long long)lba, jiffies)); + if ((!(dev->raw_io_interface) || !(dev->raw_io_64)) && + (lba & 0xffffffff00000000LL)) { + dprintk((KERN_DEBUG "aac_read: Illegal lba\n")); + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + set_sense((u8 *) &dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, + SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, + 0, 0); + memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, + (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) + ? sizeof(scsicmd->sense_buffer) + : sizeof(dev->fsa_dev[cid].sense_data)); + scsicmd->scsi_done(scsicmd); + return 0; + } /* * Alocate and initialize a Fib */ @@ -936,8 +1052,8 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) if (dev->raw_io_interface) { struct aac_raw_io *readcmd; readcmd = (struct aac_raw_io *) fib_data(cmd_fibcontext); - readcmd->block[0] = cpu_to_le32(lba); - readcmd->block[1] = 0; + readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); + readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); readcmd->count = cpu_to_le32(count<<9); readcmd->cid = cpu_to_le16(cid); readcmd->flags = cpu_to_le16(1); @@ -964,7 +1080,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) readcmd->command = cpu_to_le32(VM_CtHostRead64); readcmd->cid = cpu_to_le16(cid); readcmd->sector_count = cpu_to_le16(count); - readcmd->block = cpu_to_le32(lba); + readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); readcmd->pad = 0; readcmd->flags = 0; @@ -989,7 +1105,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) readcmd = (struct aac_read *) fib_data(cmd_fibcontext); readcmd->command = cpu_to_le32(VM_CtBlockRead); readcmd->cid = cpu_to_le32(cid); - readcmd->block = cpu_to_le32(lba); + readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); readcmd->count = cpu_to_le32(count * 512); aac_build_sg(scsicmd, &readcmd->sg); @@ -1031,7 +1147,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) static int aac_write(struct scsi_cmnd * scsicmd, int cid) { - u32 lba; + u64 lba; u32 count; int status; u16 fibsize; @@ -1048,13 +1164,48 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid) count = scsicmd->cmnd[4]; if (count == 0) count = 256; + } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */ + dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", cid)); + + lba = ((u64)scsicmd->cmnd[2] << 56) | + ((u64)scsicmd->cmnd[3] << 48) | + ((u64)scsicmd->cmnd[4] << 40) | + ((u64)scsicmd->cmnd[5] << 32) | + ((u64)scsicmd->cmnd[6] << 24) | + (scsicmd->cmnd[7] << 16) | + (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; + count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) | + (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; + } else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */ + dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", cid)); + + lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) + | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; + count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16) + | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; } else { dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", cid)); - lba = (scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; + lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; } - dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %u, t = %ld.\n", + dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n", smp_processor_id(), (unsigned long long)lba, jiffies)); + if ((!(dev->raw_io_interface) || !(dev->raw_io_64)) + && (lba & 0xffffffff00000000LL)) { + dprintk((KERN_DEBUG "aac_write: Illegal lba\n")); + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; + set_sense((u8 *) &dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, + SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, + 0, 0); + memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, + (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) + ? sizeof(scsicmd->sense_buffer) + : sizeof(dev->fsa_dev[cid].sense_data)); + scsicmd->scsi_done(scsicmd); + return 0; + } /* * Allocate and initialize a Fib then setup a BlockWrite command */ @@ -1068,8 +1219,8 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid) if (dev->raw_io_interface) { struct aac_raw_io *writecmd; writecmd = (struct aac_raw_io *) fib_data(cmd_fibcontext); - writecmd->block[0] = cpu_to_le32(lba); - writecmd->block[1] = 0; + writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); + writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); writecmd->count = cpu_to_le32(count<<9); writecmd->cid = cpu_to_le16(cid); writecmd->flags = 0; @@ -1096,7 +1247,7 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid) writecmd->command = cpu_to_le32(VM_CtHostWrite64); writecmd->cid = cpu_to_le16(cid); writecmd->sector_count = cpu_to_le16(count); - writecmd->block = cpu_to_le32(lba); + writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); writecmd->pad = 0; writecmd->flags = 0; @@ -1121,7 +1272,7 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid) writecmd = (struct aac_write *) fib_data(cmd_fibcontext); writecmd->command = cpu_to_le32(VM_CtBlockWrite); writecmd->cid = cpu_to_le32(cid); - writecmd->block = cpu_to_le32(lba); + writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); writecmd->count = cpu_to_le32(count * 512); writecmd->sg.count = cpu_to_le32(1); /* ->stable is not used - it did mean which type of write */ @@ -1310,11 +1461,18 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) */ if ((fsa_dev_ptr[cid].valid & 1) == 0) { switch (scsicmd->cmnd[0]) { + case SERVICE_ACTION_IN: + if (!(dev->raw_io_interface) || + !(dev->raw_io_64) || + ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) + break; case INQUIRY: case READ_CAPACITY: case TEST_UNIT_READY: spin_unlock_irq(host->host_lock); probe_container(dev, cid); + if ((fsa_dev_ptr[cid].valid & 1) == 0) + fsa_dev_ptr[cid].valid = 0; spin_lock_irq(host->host_lock); if (fsa_dev_ptr[cid].valid == 0) { scsicmd->result = DID_NO_CONNECT << 16; @@ -1375,7 +1533,6 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) memset(&inq_data, 0, sizeof (struct inquiry_data)); inq_data.inqd_ver = 2; /* claim compliance to SCSI-2 */ - inq_data.inqd_dtq = 0x80; /* set RMB bit to one indicating that the medium is removable */ inq_data.inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */ inq_data.inqd_len = 31; /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */ @@ -1397,13 +1554,55 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data)); return aac_get_container_name(scsicmd, cid); } + case SERVICE_ACTION_IN: + if (!(dev->raw_io_interface) || + !(dev->raw_io_64) || + ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) + break; + { + u64 capacity; + char cp[12]; + unsigned int offset = 0; + + dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n")); + capacity = fsa_dev_ptr[cid].size - 1; + if (scsicmd->cmnd[13] > 12) { + offset = scsicmd->cmnd[13] - 12; + if (offset > sizeof(cp)) + break; + memset(cp, 0, offset); + aac_internal_transfer(scsicmd, cp, 0, offset); + } + cp[0] = (capacity >> 56) & 0xff; + cp[1] = (capacity >> 48) & 0xff; + cp[2] = (capacity >> 40) & 0xff; + cp[3] = (capacity >> 32) & 0xff; + cp[4] = (capacity >> 24) & 0xff; + cp[5] = (capacity >> 16) & 0xff; + cp[6] = (capacity >> 8) & 0xff; + cp[7] = (capacity >> 0) & 0xff; + cp[8] = 0; + cp[9] = 0; + cp[10] = 2; + cp[11] = 0; + aac_internal_transfer(scsicmd, cp, offset, sizeof(cp)); + + /* Do not cache partition table for arrays */ + scsicmd->device->removable = 1; + + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; + scsicmd->scsi_done(scsicmd); + + return 0; + } + case READ_CAPACITY: { u32 capacity; char cp[8]; dprintk((KERN_DEBUG "READ CAPACITY command.\n")); - if (fsa_dev_ptr[cid].size <= 0x100000000LL) + if (fsa_dev_ptr[cid].size <= 0x100000000ULL) capacity = fsa_dev_ptr[cid].size - 1; else capacity = (u32)-1; @@ -1417,6 +1616,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) cp[6] = 2; cp[7] = 0; aac_internal_transfer(scsicmd, cp, 0, sizeof(cp)); + /* Do not cache partition table for arrays */ + scsicmd->device->removable = 1; scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; scsicmd->scsi_done(scsicmd); @@ -1497,6 +1698,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) { case READ_6: case READ_10: + case READ_12: + case READ_16: /* * Hack to keep track of ordinal number of the device that * corresponds to a container. Needed to convert @@ -1504,17 +1707,19 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) */ spin_unlock_irq(host->host_lock); - if (scsicmd->request->rq_disk) - memcpy(fsa_dev_ptr[cid].devname, - scsicmd->request->rq_disk->disk_name, - 8); - + if (scsicmd->request->rq_disk) + strlcpy(fsa_dev_ptr[cid].devname, + scsicmd->request->rq_disk->disk_name, + min(sizeof(fsa_dev_ptr[cid].devname), + sizeof(scsicmd->request->rq_disk->disk_name) + 1)); ret = aac_read(scsicmd, cid); spin_lock_irq(host->host_lock); return ret; case WRITE_6: case WRITE_10: + case WRITE_12: + case WRITE_16: spin_unlock_irq(host->host_lock); ret = aac_write(scsicmd, cid); spin_lock_irq(host->host_lock); @@ -1745,6 +1950,8 @@ static void aac_srb_callback(void *context, struct fib * fibptr) case WRITE_10: case READ_12: case WRITE_12: + case READ_16: + case WRITE_16: if(le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow ) { printk(KERN_WARNING"aacraid: SCSI CMD underflow\n"); } else { @@ -1850,8 +2057,8 @@ static void aac_srb_callback(void *context, struct fib * fibptr) sizeof(scsicmd->sense_buffer) : le32_to_cpu(srbreply->sense_data_size); #ifdef AAC_DETAILED_STATUS_INFO - dprintk((KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", - le32_to_cpu(srbreply->status), len)); + printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", + le32_to_cpu(srbreply->status), len); #endif memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index e40528185d4..4a99d2f000f 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1,6 +1,10 @@ #if (!defined(dprintk)) # define dprintk(x) #endif +/* eg: if (nblank(dprintk(x))) */ +#define _nblank(x) #x +#define nblank(x) _nblank(x)[0] + /*------------------------------------------------------------------------------ * D E F I N E S @@ -302,7 +306,6 @@ enum aac_queue_types { */ #define FsaNormal 1 -#define FsaHigh 2 /* * Define the FIB. The FIB is the where all the requested data and @@ -546,8 +549,6 @@ struct aac_queue { /* This is only valid for adapter to host command queues. */ spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */ - unsigned long SavedIrql; /* Previous IRQL when the spin lock is taken */ - u32 padding; /* Padding - FIXME - can remove I believe */ struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ /* only valid for command queues which receive entries from the adapter. */ struct list_head pendingq; /* A queue of outstanding fib's to the adapter. */ @@ -776,7 +777,9 @@ struct fsa_dev_info { u64 last; u64 size; u32 type; + u32 config_waiting_on; u16 queue_depth; + u8 config_needed; u8 valid; u8 ro; u8 locked; @@ -1012,6 +1015,7 @@ struct aac_dev /* macro side-effects BEWARE */ # define raw_io_interface \ init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4) + u8 raw_io_64; u8 printf_enabled; }; @@ -1362,8 +1366,10 @@ struct aac_srb_reply #define VM_CtBlockVerify64 18 #define VM_CtHostRead64 19 #define VM_CtHostWrite64 20 +#define VM_DrvErrTblLog 21 +#define VM_NameServe64 22 -#define MAX_VMCOMMAND_NUM 21 /* used for sizing stats array - leave last */ +#define MAX_VMCOMMAND_NUM 23 /* used for sizing stats array - leave last */ /* * Descriptive information (eg, vital stats) @@ -1472,6 +1478,7 @@ struct aac_mntent { manager (eg, filesystem) */ __le32 altoid; /* != oid <==> snapshot or broken mirror exists */ + __le32 capacityhigh; }; #define FSCS_NOTCLEAN 0x0001 /* fsck is neccessary before mounting */ @@ -1707,6 +1714,7 @@ extern struct aac_common aac_config; #define AifCmdJobProgress 2 /* Progress report */ #define AifJobCtrZero 101 /* Array Zero progress */ #define AifJobStsSuccess 1 /* Job completes */ +#define AifJobStsRunning 102 /* Job running */ #define AifCmdAPIReport 3 /* Report from other user of API */ #define AifCmdDriverNotify 4 /* Notify host driver of event */ #define AifDenMorphComplete 200 /* A morph operation completed */ @@ -1777,6 +1785,7 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size); struct aac_driver_ident* aac_get_driver_ident(int devtype); int aac_get_adapter_info(struct aac_dev* dev); int aac_send_shutdown(struct aac_dev *dev); +int probe_container(struct aac_dev *dev, int cid); extern int numacb; extern int acbsize; extern char aac_driver_version[]; diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 75abd045328..59a341b2aed 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -195,7 +195,7 @@ int aac_send_shutdown(struct aac_dev * dev) fibctx, sizeof(struct aac_close), FsaNormal, - 1, 1, + -2 /* Timeout silently */, 1, NULL, NULL); if (status == 0) @@ -313,8 +313,15 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) dev->max_fib_size = sizeof(struct hw_fib); dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size - sizeof(struct aac_fibhdr) - - sizeof(struct aac_write) + sizeof(struct sgmap)) - / sizeof(struct sgmap); + - sizeof(struct aac_write) + sizeof(struct sgentry)) + / sizeof(struct sgentry); + dev->raw_io_64 = 0; + if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, + 0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) && + (status[0] == 0x00000001)) { + if (status[1] & AAC_OPT_NEW_COMM_64) + dev->raw_io_64 = 1; + } if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS, 0, 0, 0, 0, 0, 0, status+0, status+1, status+2, status+3, status+4)) @@ -342,8 +349,8 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) dev->max_fib_size = 512; dev->sg_tablesize = host->sg_tablesize = (512 - sizeof(struct aac_fibhdr) - - sizeof(struct aac_write) + sizeof(struct sgmap)) - / sizeof(struct sgmap); + - sizeof(struct aac_write) + sizeof(struct sgentry)) + / sizeof(struct sgentry); host->can_queue = AAC_NUM_IO_FIB; } else if (acbsize == 2048) { host->max_sectors = 512; diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index a1d303f0348..e4d543a474a 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -39,7 +39,9 @@ #include <linux/completion.h> #include <linux/blkdev.h> #include <scsi/scsi_host.h> +#include <scsi/scsi_device.h> #include <asm/semaphore.h> +#include <asm/delay.h> #include "aacraid.h" @@ -269,40 +271,22 @@ static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entr /* Interrupt Moderation, only interrupt for first two entries */ if (idx != le32_to_cpu(*(q->headers.consumer))) { if (--idx == 0) { - if (qid == AdapHighCmdQueue) - idx = ADAP_HIGH_CMD_ENTRIES; - else if (qid == AdapNormCmdQueue) + if (qid == AdapNormCmdQueue) idx = ADAP_NORM_CMD_ENTRIES; - else if (qid == AdapHighRespQueue) - idx = ADAP_HIGH_RESP_ENTRIES; - else if (qid == AdapNormRespQueue) + else idx = ADAP_NORM_RESP_ENTRIES; } if (idx != le32_to_cpu(*(q->headers.consumer))) *nonotify = 1; } - if (qid == AdapHighCmdQueue) { - if (*index >= ADAP_HIGH_CMD_ENTRIES) - *index = 0; - } else if (qid == AdapNormCmdQueue) { + if (qid == AdapNormCmdQueue) { if (*index >= ADAP_NORM_CMD_ENTRIES) *index = 0; /* Wrap to front of the Producer Queue. */ - } - else if (qid == AdapHighRespQueue) - { - if (*index >= ADAP_HIGH_RESP_ENTRIES) - *index = 0; - } - else if (qid == AdapNormRespQueue) - { + } else { if (*index >= ADAP_NORM_RESP_ENTRIES) *index = 0; /* Wrap to front of the Producer Queue. */ } - else { - printk("aacraid: invalid qid\n"); - BUG(); - } if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */ printk(KERN_WARNING "Queue %d full, %u outstanding.\n", @@ -334,12 +318,8 @@ static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_f { struct aac_entry * entry = NULL; int map = 0; - struct aac_queue * q = &dev->queues->queue[qid]; - - spin_lock_irqsave(q->lock, q->SavedIrql); - if (qid == AdapHighCmdQueue || qid == AdapNormCmdQueue) - { + if (qid == AdapNormCmdQueue) { /* if no entries wait for some if caller wants to */ while (!aac_get_entry(dev, qid, &entry, index, nonotify)) { @@ -350,9 +330,7 @@ static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_f */ entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size)); map = 1; - } - else if (qid == AdapHighRespQueue || qid == AdapNormRespQueue) - { + } else { while(!aac_get_entry(dev, qid, &entry, index, nonotify)) { /* if no entries wait for some if caller wants to */ @@ -375,42 +353,6 @@ static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_f return 0; } - -/** - * aac_insert_entry - insert a queue entry - * @dev: Adapter - * @index: Index of entry to insert - * @qid: Queue number - * @nonotify: Suppress adapter notification - * - * Gets the next free QE off the requested priorty adapter command - * queue and associates the Fib with the QE. The QE represented by - * index is ready to insert on the queue when this routine returns - * success. - */ - -static int aac_insert_entry(struct aac_dev * dev, u32 index, u32 qid, unsigned long nonotify) -{ - struct aac_queue * q = &dev->queues->queue[qid]; - - if(q == NULL) - BUG(); - *(q->headers.producer) = cpu_to_le32(index + 1); - spin_unlock_irqrestore(q->lock, q->SavedIrql); - - if (qid == AdapHighCmdQueue || - qid == AdapNormCmdQueue || - qid == AdapHighRespQueue || - qid == AdapNormRespQueue) - { - if (!nonotify) - aac_adapter_notify(dev, qid); - } - else - printk("Suprise insert!\n"); - return 0; -} - /* * Define the highest level of host to adapter communication routines. * These routines will support host to adapter FS commuication. These @@ -439,12 +381,13 @@ static int aac_insert_entry(struct aac_dev * dev, u32 index, u32 qid, unsigned l int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority, int wait, int reply, fib_callback callback, void * callback_data) { u32 index; - u32 qid; struct aac_dev * dev = fibptr->dev; unsigned long nointr = 0; struct hw_fib * hw_fib = fibptr->hw_fib; struct aac_queue * q; unsigned long flags = 0; + unsigned long qflags; + if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned))) return -EBUSY; /* @@ -497,26 +440,8 @@ int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority * Get a queue entry connect the FIB to it and send an notify * the adapter a command is ready. */ - if (priority == FsaHigh) { - hw_fib->header.XferState |= cpu_to_le32(HighPriority); - qid = AdapHighCmdQueue; - } else { - hw_fib->header.XferState |= cpu_to_le32(NormalPriority); - qid = AdapNormCmdQueue; - } - q = &dev->queues->queue[qid]; + hw_fib->header.XferState |= cpu_to_le32(NormalPriority); - if(wait) - spin_lock_irqsave(&fibptr->event_lock, flags); - if(aac_queue_get( dev, &index, qid, hw_fib, 1, fibptr, &nointr)<0) - return -EWOULDBLOCK; - dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index)); - dprintk((KERN_DEBUG "Fib contents:.\n")); - dprintk((KERN_DEBUG " Command = %d.\n", hw_fib->header.Command)); - dprintk((KERN_DEBUG " XferState = %x.\n", hw_fib->header.XferState)); - dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib)); - dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa)); - dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr)); /* * Fill in the Callback and CallbackContext if we are not * going to wait. @@ -525,22 +450,67 @@ int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority fibptr->callback = callback; fibptr->callback_data = callback_data; } - FIB_COUNTER_INCREMENT(aac_config.FibsSent); - list_add_tail(&fibptr->queue, &q->pendingq); - q->numpending++; fibptr->done = 0; fibptr->flags = 0; - if(aac_insert_entry(dev, index, qid, (nointr & aac_config.irq_mod)) < 0) - return -EWOULDBLOCK; + FIB_COUNTER_INCREMENT(aac_config.FibsSent); + + dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index)); + dprintk((KERN_DEBUG "Fib contents:.\n")); + dprintk((KERN_DEBUG " Command = %d.\n", hw_fib->header.Command)); + dprintk((KERN_DEBUG " XferState = %x.\n", hw_fib->header.XferState)); + dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib)); + dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa)); + dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr)); + + q = &dev->queues->queue[AdapNormCmdQueue]; + + if(wait) + spin_lock_irqsave(&fibptr->event_lock, flags); + spin_lock_irqsave(q->lock, qflags); + aac_queue_get( dev, &index, AdapNormCmdQueue, hw_fib, 1, fibptr, &nointr); + + list_add_tail(&fibptr->queue, &q->pendingq); + q->numpending++; + *(q->headers.producer) = cpu_to_le32(index + 1); + spin_unlock_irqrestore(q->lock, qflags); + if (!(nointr & aac_config.irq_mod)) + aac_adapter_notify(dev, AdapNormCmdQueue); /* * If the caller wanted us to wait for response wait now. */ if (wait) { spin_unlock_irqrestore(&fibptr->event_lock, flags); - down(&fibptr->event_wait); + /* Only set for first known interruptable command */ + if (wait < 0) { + /* + * *VERY* Dangerous to time out a command, the + * assumption is made that we have no hope of + * functioning because an interrupt routing or other + * hardware failure has occurred. + */ + unsigned long count = 36000000L; /* 3 minutes */ + unsigned long qflags; + while (down_trylock(&fibptr->event_wait)) { + if (--count == 0) { + spin_lock_irqsave(q->lock, qflags); + q->numpending--; + list_del(&fibptr->queue); + spin_unlock_irqrestore(q->lock, qflags); + if (wait == -1) { + printk(KERN_ERR "aacraid: fib_send: first asynchronous command timed out.\n" + "Usually a result of a PCI interrupt routing problem;\n" + "update mother board BIOS or consider utilizing one of\n" + "the SAFE mode kernel options (acpi, apic etc)\n"); + } + return -ETIMEDOUT; + } + udelay(5); + } + } else + down(&fibptr->event_wait); if(fibptr->done == 0) BUG(); @@ -622,15 +592,9 @@ void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid) case HostNormCmdQueue: notify = HostNormCmdNotFull; break; - case HostHighCmdQueue: - notify = HostHighCmdNotFull; - break; case HostNormRespQueue: notify = HostNormRespNotFull; break; - case HostHighRespQueue: - notify = HostHighRespNotFull; - break; default: BUG(); return; @@ -652,9 +616,13 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size) { struct hw_fib * hw_fib = fibptr->hw_fib; struct aac_dev * dev = fibptr->dev; + struct aac_queue * q; unsigned long nointr = 0; - if (hw_fib->header.XferState == 0) + unsigned long qflags; + + if (hw_fib->header.XferState == 0) { return 0; + } /* * If we plan to do anything check the structure type first. */ @@ -669,37 +637,21 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size) * send the completed cdb to the adapter. */ if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) { + u32 index; hw_fib->header.XferState |= cpu_to_le32(HostProcessed); - if (hw_fib->header.XferState & cpu_to_le32(HighPriority)) { - u32 index; - if (size) - { - size += sizeof(struct aac_fibhdr); - if (size > le16_to_cpu(hw_fib->header.SenderSize)) - return -EMSGSIZE; - hw_fib->header.Size = cpu_to_le16(size); - } - if(aac_queue_get(dev, &index, AdapHighRespQueue, hw_fib, 1, NULL, &nointr) < 0) { - return -EWOULDBLOCK; - } - if (aac_insert_entry(dev, index, AdapHighRespQueue, (nointr & (int)aac_config.irq_mod)) != 0) { - } - } else if (hw_fib->header.XferState & - cpu_to_le32(NormalPriority)) { - u32 index; - - if (size) { - size += sizeof(struct aac_fibhdr); - if (size > le16_to_cpu(hw_fib->header.SenderSize)) - return -EMSGSIZE; - hw_fib->header.Size = cpu_to_le16(size); - } - if (aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr) < 0) - return -EWOULDBLOCK; - if (aac_insert_entry(dev, index, AdapNormRespQueue, (nointr & (int)aac_config.irq_mod)) != 0) - { - } + if (size) { + size += sizeof(struct aac_fibhdr); + if (size > le16_to_cpu(hw_fib->header.SenderSize)) + return -EMSGSIZE; + hw_fib->header.Size = cpu_to_le16(size); } + q = &dev->queues->queue[AdapNormRespQueue]; + spin_lock_irqsave(q->lock, qflags); + aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr); + *(q->headers.producer) = cpu_to_le32(index + 1); + spin_unlock_irqrestore(q->lock, qflags); + if (!(nointr & (int)aac_config.irq_mod)) + aac_adapter_notify(dev, AdapNormRespQueue); } else { @@ -791,6 +743,268 @@ void aac_printf(struct aac_dev *dev, u32 val) memset(cp, 0, 256); } + +/** + * aac_handle_aif - Handle a message from the firmware + * @dev: Which adapter this fib is from + * @fibptr: Pointer to fibptr from adapter + * + * This routine handles a driver notify fib from the adapter and + * dispatches it to the appropriate routine for handling. + */ + +static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) +{ + struct hw_fib * hw_fib = fibptr->hw_fib; + struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data; + int busy; + u32 container; + struct scsi_device *device; + enum { + NOTHING, + DELETE, + ADD, + CHANGE + } device_config_needed; + + /* Sniff for container changes */ + + if (!dev) + return; + container = (u32)-1; + + /* + * We have set this up to try and minimize the number of + * re-configures that take place. As a result of this when + * certain AIF's come in we will set a flag waiting for another + * type of AIF before setting the re-config flag. + */ + switch (le32_to_cpu(aifcmd->command)) { + case AifCmdDriverNotify: + switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) { + /* + * Morph or Expand complete + */ + case AifDenMorphComplete: + case AifDenVolumeExtendComplete: + container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + if (container >= dev->maximum_num_containers) + break; + + /* + * Find the Scsi_Device associated with the SCSI + * address. Make sure we have the right array, and if + * so set the flag to initiate a new re-config once we + * see an AifEnConfigChange AIF come through. + */ + + if ((dev != NULL) && (dev->scsi_host_ptr != NULL)) { + device = scsi_device_lookup(dev->scsi_host_ptr, + CONTAINER_TO_CHANNEL(container), + CONTAINER_TO_ID(container), + CONTAINER_TO_LUN(container)); + if (device) { + dev->fsa_dev[container].config_needed = CHANGE; + dev->fsa_dev[container].config_waiting_on = AifEnConfigChange; + scsi_device_put(device); + } + } + } + + /* + * If we are waiting on something and this happens to be + * that thing then set the re-configure flag. + */ + if (container != (u32)-1) { + if (container >= dev->maximum_num_containers) + break; + if (dev->fsa_dev[container].config_waiting_on == + le32_to_cpu(*(u32 *)aifcmd->data)) + dev->fsa_dev[container].config_waiting_on = 0; + } else for (container = 0; + container < dev->maximum_num_containers; ++container) { + if (dev->fsa_dev[container].config_waiting_on == + le32_to_cpu(*(u32 *)aifcmd->data)) + dev->fsa_dev[container].config_waiting_on = 0; + } + break; + + case AifCmdEventNotify: + switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) { + /* + * Add an Array. + */ + case AifEnAddContainer: + container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + if (container >= dev->maximum_num_containers) + break; + dev->fsa_dev[container].config_needed = ADD; + dev->fsa_dev[container].config_waiting_on = + AifEnConfigChange; + break; + + /* + * Delete an Array. + */ + case AifEnDeleteContainer: + container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + if (container >= dev->maximum_num_containers) + break; + dev->fsa_dev[container].config_needed = DELETE; + dev->fsa_dev[container].config_waiting_on = + AifEnConfigChange; + break; + + /* + * Container change detected. If we currently are not + * waiting on something else, setup to wait on a Config Change. + */ + case AifEnContainerChange: + container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + if (container >= dev->maximum_num_containers) + break; + if (dev->fsa_dev[container].config_waiting_on) + break; + dev->fsa_dev[container].config_needed = CHANGE; + dev->fsa_dev[container].config_waiting_on = + AifEnConfigChange; + break; + + case AifEnConfigChange: + break; + + } + + /* + * If we are waiting on something and this happens to be + * that thing then set the re-configure flag. + */ + if (container != (u32)-1) { + if (container >= dev->maximum_num_containers) + break; + if (dev->fsa_dev[container].config_waiting_on == + le32_to_cpu(*(u32 *)aifcmd->data)) + dev->fsa_dev[container].config_waiting_on = 0; + } else for (container = 0; + container < dev->maximum_num_containers; ++container) { + if (dev->fsa_dev[container].config_waiting_on == + le32_to_cpu(*(u32 *)aifcmd->data)) + dev->fsa_dev[container].config_waiting_on = 0; + } + break; + + case AifCmdJobProgress: + /* + * These are job progress AIF's. When a Clear is being + * done on a container it is initially created then hidden from + * the OS. When the clear completes we don't get a config + * change so we monitor the job status complete on a clear then + * wait for a container change. + */ + + if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero)) + && ((((u32 *)aifcmd->data)[6] == ((u32 *)aifcmd->data)[5]) + || (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess)))) { + for (container = 0; + container < dev->maximum_num_containers; + ++container) { + /* + * Stomp on all config sequencing for all + * containers? + */ + dev->fsa_dev[container].config_waiting_on = + AifEnContainerChange; + dev->fsa_dev[container].config_needed = ADD; + } + } + if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero)) + && (((u32 *)aifcmd->data)[6] == 0) + && (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning))) { + for (container = 0; + container < dev->maximum_num_containers; + ++container) { + /* + * Stomp on all config sequencing for all + * containers? + */ + dev->fsa_dev[container].config_waiting_on = + AifEnContainerChange; + dev->fsa_dev[container].config_needed = DELETE; + } + } + break; + } + + device_config_needed = NOTHING; + for (container = 0; container < dev->maximum_num_containers; + ++container) { + if ((dev->fsa_dev[container].config_waiting_on == 0) + && (dev->fsa_dev[container].config_needed != NOTHING)) { + device_config_needed = + dev->fsa_dev[container].config_needed; + dev->fsa_dev[container].config_needed = NOTHING; + break; + } + } + if (device_config_needed == NOTHING) + return; + + /* + * If we decided that a re-configuration needs to be done, + * schedule it here on the way out the door, please close the door + * behind you. + */ + + busy = 0; + + + /* + * Find the Scsi_Device associated with the SCSI address, + * and mark it as changed, invalidating the cache. This deals + * with changes to existing device IDs. + */ + + if (!dev || !dev->scsi_host_ptr) + return; + /* + * force reload of disk info via probe_container + */ + if ((device_config_needed == CHANGE) + && (dev->fsa_dev[container].valid == 1)) + dev->fsa_dev[container].valid = 2; + if ((device_config_needed == CHANGE) || + (device_config_needed == ADD)) + probe_container(dev, container); + device = scsi_device_lookup(dev->scsi_host_ptr, + CONTAINER_TO_CHANNEL(container), + CONTAINER_TO_ID(container), + CONTAINER_TO_LUN(container)); + if (device) { + switch (device_config_needed) { + case DELETE: + scsi_remove_device(device); + break; + case CHANGE: + if (!dev->fsa_dev[container].valid) { + scsi_remove_device(device); + break; + } + scsi_rescan_device(&device->sdev_gendev); + + default: + break; + } + scsi_device_put(device); + } + if (device_config_needed == ADD) { + scsi_add_device(dev->scsi_host_ptr, + CONTAINER_TO_CHANNEL(container), + CONTAINER_TO_ID(container), + CONTAINER_TO_LUN(container)); + } + +} + /** * aac_command_thread - command processing thread * @dev: Adapter to monitor @@ -805,7 +1019,6 @@ int aac_command_thread(struct aac_dev * dev) { struct hw_fib *hw_fib, *hw_newfib; struct fib *fib, *newfib; - struct aac_queue_block *queues = dev->queues; struct aac_fib_context *fibctx; unsigned long flags; DECLARE_WAITQUEUE(wait, current); @@ -825,21 +1038,22 @@ int aac_command_thread(struct aac_dev * dev) * Let the DPC know it has a place to send the AIF's to. */ dev->aif_thread = 1; - add_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait); + add_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait); set_current_state(TASK_INTERRUPTIBLE); + dprintk ((KERN_INFO "aac_command_thread start\n")); while(1) { - spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags); - while(!list_empty(&(queues->queue[HostNormCmdQueue].cmdq))) { + spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags); + while(!list_empty(&(dev->queues->queue[HostNormCmdQueue].cmdq))) { struct list_head *entry; struct aac_aifcmd * aifcmd; set_current_state(TASK_RUNNING); - - entry = queues->queue[HostNormCmdQueue].cmdq.next; + + entry = dev->queues->queue[HostNormCmdQueue].cmdq.next; list_del(entry); - - spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags); + + spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags); fib = list_entry(entry, struct fib, fiblink); /* * We will process the FIB here or pass it to a @@ -860,6 +1074,7 @@ int aac_command_thread(struct aac_dev * dev) aifcmd = (struct aac_aifcmd *) hw_fib->data; if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) { /* Handle Driver Notify Events */ + aac_handle_aif(dev, fib); *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK); fib_adapter_complete(fib, (u16)sizeof(u32)); } else { @@ -869,9 +1084,62 @@ int aac_command_thread(struct aac_dev * dev) u32 time_now, time_last; unsigned long flagv; - + unsigned num; + struct hw_fib ** hw_fib_pool, ** hw_fib_p; + struct fib ** fib_pool, ** fib_p; + + /* Sniff events */ + if ((aifcmd->command == + cpu_to_le32(AifCmdEventNotify)) || + (aifcmd->command == + cpu_to_le32(AifCmdJobProgress))) { + aac_handle_aif(dev, fib); + } + time_now = jiffies/HZ; + /* + * Warning: no sleep allowed while + * holding spinlock. We take the estimate + * and pre-allocate a set of fibs outside the + * lock. + */ + num = le32_to_cpu(dev->init->AdapterFibsSize) + / sizeof(struct hw_fib); /* some extra */ + spin_lock_irqsave(&dev->fib_lock, flagv); + entry = dev->fib_list.next; + while (entry != &dev->fib_list) { + entry = entry->next; + ++num; + } + spin_unlock_irqrestore(&dev->fib_lock, flagv); + hw_fib_pool = NULL; + fib_pool = NULL; + if (num + && ((hw_fib_pool = kmalloc(sizeof(struct hw_fib *) * num, GFP_KERNEL))) + && ((fib_pool = kmalloc(sizeof(struct fib *) * num, GFP_KERNEL)))) { + hw_fib_p = hw_fib_pool; + fib_p = fib_pool; + while (hw_fib_p < &hw_fib_pool[num]) { + if (!(*(hw_fib_p++) = kmalloc(sizeof(struct hw_fib), GFP_KERNEL))) { + --hw_fib_p; + break; + } + if (!(*(fib_p++) = kmalloc(sizeof(struct fib), GFP_KERNEL))) { + kfree(*(--hw_fib_p)); + break; + } + } + if ((num = hw_fib_p - hw_fib_pool) == 0) { + kfree(fib_pool); + fib_pool = NULL; + kfree(hw_fib_pool); + hw_fib_pool = NULL; + } + } else if (hw_fib_pool) { + kfree(hw_fib_pool); + hw_fib_pool = NULL; + } spin_lock_irqsave(&dev->fib_lock, flagv); entry = dev->fib_list.next; /* @@ -880,6 +1148,8 @@ int aac_command_thread(struct aac_dev * dev) * fib, and then set the event to wake up the * thread that is waiting for it. */ + hw_fib_p = hw_fib_pool; + fib_p = fib_pool; while (entry != &dev->fib_list) { /* * Extract the fibctx @@ -912,9 +1182,11 @@ int aac_command_thread(struct aac_dev * dev) * Warning: no sleep allowed while * holding spinlock */ - hw_newfib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC); - newfib = kmalloc(sizeof(struct fib), GFP_ATOMIC); - if (newfib && hw_newfib) { + if (hw_fib_p < &hw_fib_pool[num]) { + hw_newfib = *hw_fib_p; + *(hw_fib_p++) = NULL; + newfib = *fib_p; + *(fib_p++) = NULL; /* * Make the copy of the FIB */ @@ -929,15 +1201,11 @@ int aac_command_thread(struct aac_dev * dev) fibctx->count++; /* * Set the event to wake up the - * thread that will waiting. + * thread that is waiting. */ up(&fibctx->wait_sem); } else { printk(KERN_WARNING "aifd: didn't allocate NewFib.\n"); - if(newfib) - kfree(newfib); - if(hw_newfib) - kfree(hw_newfib); } entry = entry->next; } @@ -947,21 +1215,38 @@ int aac_command_thread(struct aac_dev * dev) *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK); fib_adapter_complete(fib, sizeof(u32)); spin_unlock_irqrestore(&dev->fib_lock, flagv); + /* Free up the remaining resources */ + hw_fib_p = hw_fib_pool; + fib_p = fib_pool; + while (hw_fib_p < &hw_fib_pool[num]) { + if (*hw_fib_p) + kfree(*hw_fib_p); + if (*fib_p) + kfree(*fib_p); + ++fib_p; + ++hw_fib_p; + } + if (hw_fib_pool) + kfree(hw_fib_pool); + if (fib_pool) + kfree(fib_pool); } - spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags); kfree(fib); + spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags); } /* * There are no more AIF's */ - spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags); + spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags); schedule(); if(signal_pending(current)) break; set_current_state(TASK_INTERRUPTIBLE); } - remove_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait); + if (dev->queues) + remove_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait); dev->aif_thread = 0; complete_and_exit(&dev->aif_completion, 0); + return 0; } diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 4ff29d7f582..de8490a9283 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -748,7 +748,8 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, unique_id++; } - if (pci_enable_device(pdev)) + error = pci_enable_device(pdev); + if (error) goto out; if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL) || @@ -772,6 +773,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, shost->irq = pdev->irq; shost->base = pci_resource_start(pdev, 0); shost->unique_id = unique_id; + shost->max_cmd_len = 16; aac = (struct aac_dev *)shost->hostdata; aac->scsi_host_ptr = shost; @@ -799,7 +801,9 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, goto out_free_fibs; aac->maximum_num_channels = aac_drivers[index].channels; - aac_get_adapter_info(aac); + error = aac_get_adapter_info(aac); + if (error < 0) + goto out_deinit; /* * Lets override negotiations and drop the maximum SG limit to 34 @@ -927,8 +931,8 @@ static int __init aac_init(void) printk(KERN_INFO "Adaptec %s driver (%s)\n", AAC_DRIVERNAME, aac_driver_version); - error = pci_module_init(&aac_pci_driver); - if (error) + error = pci_register_driver(&aac_pci_driver); + if (error < 0) return error; aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops); diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c index 70c5fb59c9e..d754b326786 100644 --- a/drivers/scsi/aic7xxx/aic7770_osm.c +++ b/drivers/scsi/aic7xxx/aic7770_osm.c @@ -112,6 +112,9 @@ aic7770_remove(struct device *dev) struct ahc_softc *ahc = dev_get_drvdata(dev); u_long s; + if (ahc->platform_data && ahc->platform_data->host) + scsi_remove_host(ahc->platform_data->host); + ahc_lock(ahc, &s); ahc_intr_enable(ahc, FALSE); ahc_unlock(ahc, &s); diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 6b6d4e28779..95c285cc83e 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -1192,11 +1192,6 @@ ahd_platform_free(struct ahd_softc *ahd) int i, j; if (ahd->platform_data != NULL) { - if (ahd->platform_data->host != NULL) { - scsi_remove_host(ahd->platform_data->host); - scsi_host_put(ahd->platform_data->host); - } - /* destroy all of the device and target objects */ for (i = 0; i < AHD_NUM_TARGETS; i++) { starget = ahd->platform_data->starget[i]; @@ -1226,6 +1221,9 @@ ahd_platform_free(struct ahd_softc *ahd) release_mem_region(ahd->platform_data->mem_busaddr, 0x1000); } + if (ahd->platform_data->host) + scsi_host_put(ahd->platform_data->host); + free(ahd->platform_data, M_DEVBUF); } } diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c index 390b53852d4..bf360ae021a 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c @@ -95,6 +95,9 @@ ahd_linux_pci_dev_remove(struct pci_dev *pdev) struct ahd_softc *ahd = pci_get_drvdata(pdev); u_long s; + if (ahd->platform_data && ahd->platform_data->host) + scsi_remove_host(ahd->platform_data->host); + ahd_lock(ahd, &s); ahd_intr_enable(ahd, FALSE); ahd_unlock(ahd, &s); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index 876d1de8480..6ee1435d37f 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -1209,11 +1209,6 @@ ahc_platform_free(struct ahc_softc *ahc) int i, j; if (ahc->platform_data != NULL) { - if (ahc->platform_data->host != NULL) { - scsi_remove_host(ahc->platform_data->host); - scsi_host_put(ahc->platform_data->host); - } - /* destroy all of the device and target objects */ for (i = 0; i < AHC_NUM_TARGETS; i++) { starget = ahc->platform_data->starget[i]; @@ -1242,6 +1237,9 @@ ahc_platform_free(struct ahc_softc *ahc) 0x1000); } + if (ahc->platform_data->host) + scsi_host_put(ahc->platform_data->host); + free(ahc->platform_data, M_DEVBUF); } } diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c index 3ce77ddc889..cb30d9c1153 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c @@ -143,6 +143,9 @@ ahc_linux_pci_dev_remove(struct pci_dev *pdev) struct ahc_softc *ahc = pci_get_drvdata(pdev); u_long s; + if (ahc->platform_data && ahc->platform_data->host) + scsi_remove_host(ahc->platform_data->host); + ahc_lock(ahc, &s); ahc_intr_enable(ahc, FALSE); ahc_unlock(ahc, &s); diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index f2a72d33132..02fe371b0ab 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -176,6 +176,7 @@ void scsi_remove_host(struct Scsi_Host *shost) transport_unregister_device(&shost->shost_gendev); class_device_unregister(&shost->shost_classdev); device_del(&shost->shost_gendev); + scsi_proc_hostdir_rm(shost->hostt); } EXPORT_SYMBOL(scsi_remove_host); @@ -262,7 +263,6 @@ static void scsi_host_dev_release(struct device *dev) if (shost->work_q) destroy_workqueue(shost->work_q); - scsi_proc_hostdir_rm(shost->hostt); scsi_destroy_command_freelist(shost); kfree(shost->shost_data); diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 86eaf6d408d..acae7c48ef7 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -973,10 +973,10 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) if ((phba->fc_flag & FC_FABRIC) || ((phba->fc_topology == TOPOLOGY_LOOP) && (phba->fc_flag & FC_PUBLIC_LOOP))) - node_name = wwn_to_u64(phba->fc_fabparam.nodeName.wwn); + node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn); else /* fabric is local port if there is no F/FL_Port */ - node_name = wwn_to_u64(phba->fc_nodename.wwn); + node_name = wwn_to_u64(phba->fc_nodename.u.wwn); spin_unlock_irq(shost->host_lock); @@ -1110,7 +1110,7 @@ lpfc_get_starget_node_name(struct scsi_target *starget) /* Search the mapped list for this target ID */ list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) { if (starget->id == ndlp->nlp_sid) { - node_name = wwn_to_u64(ndlp->nlp_nodename.wwn); + node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); break; } } @@ -1131,7 +1131,7 @@ lpfc_get_starget_port_name(struct scsi_target *starget) /* Search the mapped list for this target ID */ list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) { if (starget->id == ndlp->nlp_sid) { - port_name = wwn_to_u64(ndlp->nlp_portname.wwn); + port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); break; } } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 4fb8eb0c84c..56052f4510c 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1019,8 +1019,8 @@ lpfc_register_remote_port(struct lpfc_hba * phba, struct fc_rport_identifiers rport_ids; /* Remote port has reappeared. Re-register w/ FC transport */ - rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.wwn); - rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.wwn); + rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); + rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); rport_ids.port_id = ndlp->nlp_DID; rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; if (ndlp->nlp_type & NLP_FCP_TARGET) diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 047a87c26cc..86c41981188 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -280,9 +280,9 @@ struct lpfc_name { #define NAME_CCITT_GR_TYPE 0xE uint8_t IEEEextLsb; /* FC Word 0, bit 16:23, IEEE extended Lsb */ uint8_t IEEE[6]; /* FC IEEE address */ - }; + } s; uint8_t wwn[8]; - }; + } u; }; struct csp { diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 454058f655d..0856ff7d3b3 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -285,7 +285,7 @@ lpfc_config_port_post(struct lpfc_hba * phba) if (phba->SerialNumber[0] == 0) { uint8_t *outptr; - outptr = (uint8_t *) & phba->fc_nodename.IEEE[0]; + outptr = &phba->fc_nodename.u.s.IEEE[0]; for (i = 0; i < 12; i++) { status = *outptr++; j = ((status & 0xf0) >> 4); @@ -1523,8 +1523,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) * Must done after lpfc_sli_hba_setup() */ - fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.wwn); - fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.wwn); + fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.u.wwn); + fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.u.wwn); fc_host_supported_classes(host) = FC_COS_CLASS3; memset(fc_host_supported_fc4s(host), 0, diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 6f308ebe3e7..61a6fd810bb 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -621,8 +621,6 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy) if(islogical) { switch (cmd->cmnd[0]) { case TEST_UNIT_READY: - memset(cmd->request_buffer, 0, cmd->request_bufflen); - #if MEGA_HAVE_CLUSTERING /* * Do we support clustering and is the support enabled @@ -652,11 +650,28 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy) return NULL; #endif - case MODE_SENSE: + case MODE_SENSE: { + char *buf; + + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *)cmd->request_buffer; + buf = kmap_atomic(sg->page, KM_IRQ0) + + sg->offset; + } else + buf = cmd->request_buffer; memset(cmd->request_buffer, 0, cmd->cmnd[4]); + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *)cmd->request_buffer; + kunmap_atomic(buf - sg->offset, KM_IRQ0); + } cmd->result = (DID_OK << 16); cmd->scsi_done(cmd); return NULL; + } case READ_CAPACITY: case INQUIRY: @@ -1685,14 +1700,23 @@ mega_rundoneq (adapter_t *adapter) static void mega_free_scb(adapter_t *adapter, scb_t *scb) { + unsigned long length; + switch( scb->dma_type ) { case MEGA_DMA_TYPE_NONE: break; case MEGA_BULK_DATA: + if (scb->cmd->use_sg == 0) + length = scb->cmd->request_bufflen; + else { + struct scatterlist *sgl = + (struct scatterlist *)scb->cmd->request_buffer; + length = sgl->length; + } pci_unmap_page(adapter->dev, scb->dma_h_bulkdata, - scb->cmd->request_bufflen, scb->dma_direction); + length, scb->dma_direction); break; case MEGA_SGLIST: @@ -1741,6 +1765,7 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len) struct scatterlist *sgl; struct page *page; unsigned long offset; + unsigned int length; Scsi_Cmnd *cmd; int sgcnt; int idx; @@ -1748,14 +1773,23 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len) cmd = scb->cmd; /* Scatter-gather not used */ - if( !cmd->use_sg ) { - - page = virt_to_page(cmd->request_buffer); - offset = offset_in_page(cmd->request_buffer); + if( cmd->use_sg == 0 || (cmd->use_sg == 1 && + !adapter->has_64bit_addr)) { + + if (cmd->use_sg == 0) { + page = virt_to_page(cmd->request_buffer); + offset = offset_in_page(cmd->request_buffer); + length = cmd->request_bufflen; + } else { + sgl = (struct scatterlist *)cmd->request_buffer; + page = sgl->page; + offset = sgl->offset; + length = sgl->length; + } scb->dma_h_bulkdata = pci_map_page(adapter->dev, page, offset, - cmd->request_bufflen, + length, scb->dma_direction); scb->dma_type = MEGA_BULK_DATA; @@ -1765,14 +1799,14 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len) */ if( adapter->has_64bit_addr ) { scb->sgl64[0].address = scb->dma_h_bulkdata; - scb->sgl64[0].length = cmd->request_bufflen; + scb->sgl64[0].length = length; *buf = (u32)scb->sgl_dma_addr; - *len = (u32)cmd->request_bufflen; + *len = (u32)length; return 1; } else { *buf = (u32)scb->dma_h_bulkdata; - *len = (u32)cmd->request_bufflen; + *len = (u32)length; } return 0; } @@ -1791,27 +1825,23 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len) if( sgcnt > adapter->sglen ) BUG(); + *len = 0; + for( idx = 0; idx < sgcnt; idx++, sgl++ ) { if( adapter->has_64bit_addr ) { scb->sgl64[idx].address = sg_dma_address(sgl); - scb->sgl64[idx].length = sg_dma_len(sgl); + *len += scb->sgl64[idx].length = sg_dma_len(sgl); } else { scb->sgl[idx].address = sg_dma_address(sgl); - scb->sgl[idx].length = sg_dma_len(sgl); + *len += scb->sgl[idx].length = sg_dma_len(sgl); } } /* Reset pointer and length fields */ *buf = scb->sgl_dma_addr; - /* - * For passthru command, dataxferlen must be set, even for commands - * with a sg list - */ - *len = (u32)cmd->request_bufflen; - /* Return count of SG requests */ return sgcnt; } diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid index 917d591d90b..7363e12663a 100644 --- a/drivers/scsi/megaraid/Kconfig.megaraid +++ b/drivers/scsi/megaraid/Kconfig.megaraid @@ -76,3 +76,12 @@ config MEGARAID_LEGACY To compile this driver as a module, choose M here: the module will be called megaraid endif + +config MEGARAID_SAS + tristate "LSI Logic MegaRAID SAS RAID Module" + depends on PCI && SCSI + help + Module for LSI Logic's SAS based RAID controllers. + To compile this driver as a module, choose 'm' here. + Module will be called megaraid_sas + diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile index 6dd99f27572..f469915b97c 100644 --- a/drivers/scsi/megaraid/Makefile +++ b/drivers/scsi/megaraid/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_MEGARAID_MM) += megaraid_mm.o obj-$(CONFIG_MEGARAID_MAILBOX) += megaraid_mbox.o +obj-$(CONFIG_MEGARAID_SAS) += megaraid_sas.o diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c new file mode 100644 index 00000000000..c3f63739573 --- /dev/null +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -0,0 +1,2806 @@ +/* + * + * Linux MegaRAID driver for SAS based RAID controllers + * + * Copyright (c) 2003-2005 LSI Logic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * FILE : megaraid_sas.c + * Version : v00.00.02.00-rc4 + * + * Authors: + * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> + * Sumant Patro <Sumant.Patro@lsil.com> + * + * List of supported controllers + * + * OEM Product Name VID DID SSVID SSID + * --- ------------ --- --- ---- ---- + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/list.h> +#include <linux/version.h> +#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/uio.h> +#include <asm/uaccess.h> +#include <linux/fs.h> +#include <linux/compat.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include "megaraid_sas.h" + +MODULE_LICENSE("GPL"); +MODULE_VERSION(MEGASAS_VERSION); +MODULE_AUTHOR("sreenivas.bagalkote@lsil.com"); +MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver"); + +/* + * PCI ID table for all supported controllers + */ +static struct pci_device_id megasas_pci_table[] = { + + { + PCI_VENDOR_ID_LSI_LOGIC, + PCI_DEVICE_ID_LSI_SAS1064R, + PCI_ANY_ID, + PCI_ANY_ID, + }, + { + PCI_VENDOR_ID_DELL, + PCI_DEVICE_ID_DELL_PERC5, + PCI_ANY_ID, + PCI_ANY_ID, + }, + {0} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(pci, megasas_pci_table); + +static int megasas_mgmt_majorno; +static struct megasas_mgmt_info megasas_mgmt_info; +static struct fasync_struct *megasas_async_queue; +static DECLARE_MUTEX(megasas_async_queue_mutex); + +/** + * megasas_get_cmd - Get a command from the free pool + * @instance: Adapter soft state + * + * Returns a free command from the pool + */ +static inline struct megasas_cmd *megasas_get_cmd(struct megasas_instance + *instance) +{ + unsigned long flags; + struct megasas_cmd *cmd = NULL; + + spin_lock_irqsave(&instance->cmd_pool_lock, flags); + + if (!list_empty(&instance->cmd_pool)) { + cmd = list_entry((&instance->cmd_pool)->next, + struct megasas_cmd, list); + list_del_init(&cmd->list); + } else { + printk(KERN_ERR "megasas: Command pool empty!\n"); + } + + spin_unlock_irqrestore(&instance->cmd_pool_lock, flags); + return cmd; +} + +/** + * megasas_return_cmd - Return a cmd to free command pool + * @instance: Adapter soft state + * @cmd: Command packet to be returned to free command pool + */ +static inline void +megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + unsigned long flags; + + spin_lock_irqsave(&instance->cmd_pool_lock, flags); + + cmd->scmd = NULL; + list_add_tail(&cmd->list, &instance->cmd_pool); + + spin_unlock_irqrestore(&instance->cmd_pool_lock, flags); +} + +/** + * megasas_enable_intr - Enables interrupts + * @regs: MFI register set + */ +static inline void +megasas_enable_intr(struct megasas_register_set __iomem * regs) +{ + writel(1, &(regs)->outbound_intr_mask); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_disable_intr - Disables interrupts + * @regs: MFI register set + */ +static inline void +megasas_disable_intr(struct megasas_register_set __iomem * regs) +{ + u32 mask = readl(®s->outbound_intr_mask) & (~0x00000001); + writel(mask, ®s->outbound_intr_mask); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_issue_polled - Issues a polling command + * @instance: Adapter soft state + * @cmd: Command packet to be issued + * + * For polling, MFI requires the cmd_status to be set to 0xFF before posting. + */ +static int +megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + int i; + u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000; + + struct megasas_header *frame_hdr = &cmd->frame->hdr; + + frame_hdr->cmd_status = 0xFF; + frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; + + /* + * Issue the frame using inbound queue port + */ + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + /* + * Wait for cmd_status to change + */ + for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) { + rmb(); + msleep(1); + } + + if (frame_hdr->cmd_status == 0xff) + return -ETIME; + + return 0; +} + +/** + * megasas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds + * @instance: Adapter soft state + * @cmd: Command to be issued + * + * This function waits on an event for the command to be returned from ISR. + * Used to issue ioctl commands. + */ +static int +megasas_issue_blocked_cmd(struct megasas_instance *instance, + struct megasas_cmd *cmd) +{ + cmd->cmd_status = ENODATA; + + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA)); + + return 0; +} + +/** + * megasas_issue_blocked_abort_cmd - Aborts previously issued cmd + * @instance: Adapter soft state + * @cmd_to_abort: Previously issued cmd to be aborted + * + * MFI firmware can abort previously issued AEN comamnd (automatic event + * notification). The megasas_issue_blocked_abort_cmd() issues such abort + * cmd and blocks till it is completed. + */ +static int +megasas_issue_blocked_abort_cmd(struct megasas_instance *instance, + struct megasas_cmd *cmd_to_abort) +{ + struct megasas_cmd *cmd; + struct megasas_abort_frame *abort_fr; + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return -1; + + abort_fr = &cmd->frame->abort; + + /* + * Prepare and issue the abort frame + */ + abort_fr->cmd = MFI_CMD_ABORT; + abort_fr->cmd_status = 0xFF; + abort_fr->flags = 0; + abort_fr->abort_context = cmd_to_abort->index; + abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr; + abort_fr->abort_mfi_phys_addr_hi = 0; + + cmd->sync_cmd = 1; + cmd->cmd_status = 0xFF; + + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + /* + * Wait for this cmd to complete + */ + wait_event(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF)); + + megasas_return_cmd(instance, cmd); + return 0; +} + +/** + * megasas_make_sgl32 - Prepares 32-bit SGL + * @instance: Adapter soft state + * @scp: SCSI command from the mid-layer + * @mfi_sgl: SGL to be filled in + * + * If successful, this function returns the number of SG elements. Otherwise, + * it returnes -1. + */ +static inline int +megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd *scp, + union megasas_sgl *mfi_sgl) +{ + int i; + int sge_count; + struct scatterlist *os_sgl; + + /* + * Return 0 if there is no data transfer + */ + if (!scp->request_buffer || !scp->request_bufflen) + return 0; + + if (!scp->use_sg) { + mfi_sgl->sge32[0].phys_addr = pci_map_single(instance->pdev, + scp-> + request_buffer, + scp-> + request_bufflen, + scp-> + sc_data_direction); + mfi_sgl->sge32[0].length = scp->request_bufflen; + + return 1; + } + + os_sgl = (struct scatterlist *)scp->request_buffer; + sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg, + scp->sc_data_direction); + + for (i = 0; i < sge_count; i++, os_sgl++) { + mfi_sgl->sge32[i].length = sg_dma_len(os_sgl); + mfi_sgl->sge32[i].phys_addr = sg_dma_address(os_sgl); + } + + return sge_count; +} + +/** + * megasas_make_sgl64 - Prepares 64-bit SGL + * @instance: Adapter soft state + * @scp: SCSI command from the mid-layer + * @mfi_sgl: SGL to be filled in + * + * If successful, this function returns the number of SG elements. Otherwise, + * it returnes -1. + */ +static inline int +megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp, + union megasas_sgl *mfi_sgl) +{ + int i; + int sge_count; + struct scatterlist *os_sgl; + + /* + * Return 0 if there is no data transfer + */ + if (!scp->request_buffer || !scp->request_bufflen) + return 0; + + if (!scp->use_sg) { + mfi_sgl->sge64[0].phys_addr = pci_map_single(instance->pdev, + scp-> + request_buffer, + scp-> + request_bufflen, + scp-> + sc_data_direction); + + mfi_sgl->sge64[0].length = scp->request_bufflen; + + return 1; + } + + os_sgl = (struct scatterlist *)scp->request_buffer; + sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg, + scp->sc_data_direction); + + for (i = 0; i < sge_count; i++, os_sgl++) { + mfi_sgl->sge64[i].length = sg_dma_len(os_sgl); + mfi_sgl->sge64[i].phys_addr = sg_dma_address(os_sgl); + } + + return sge_count; +} + +/** + * megasas_build_dcdb - Prepares a direct cdb (DCDB) command + * @instance: Adapter soft state + * @scp: SCSI command + * @cmd: Command to be prepared in + * + * This function prepares CDB commands. These are typcially pass-through + * commands to the devices. + */ +static inline int +megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp, + struct megasas_cmd *cmd) +{ + u32 sge_sz; + int sge_bytes; + u32 is_logical; + u32 device_id; + u16 flags = 0; + struct megasas_pthru_frame *pthru; + + is_logical = MEGASAS_IS_LOGICAL(scp); + device_id = MEGASAS_DEV_INDEX(instance, scp); + pthru = (struct megasas_pthru_frame *)cmd->frame; + + if (scp->sc_data_direction == PCI_DMA_TODEVICE) + flags = MFI_FRAME_DIR_WRITE; + else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE) + flags = MFI_FRAME_DIR_READ; + else if (scp->sc_data_direction == PCI_DMA_NONE) + flags = MFI_FRAME_DIR_NONE; + + /* + * Prepare the DCDB frame + */ + pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO : MFI_CMD_PD_SCSI_IO; + pthru->cmd_status = 0x0; + pthru->scsi_status = 0x0; + pthru->target_id = device_id; + pthru->lun = scp->device->lun; + pthru->cdb_len = scp->cmd_len; + pthru->timeout = 0; + pthru->flags = flags; + pthru->data_xfer_len = scp->request_bufflen; + + memcpy(pthru->cdb, scp->cmnd, scp->cmd_len); + + /* + * Construct SGL + */ + sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) : + sizeof(struct megasas_sge32); + + if (IS_DMA64) { + pthru->flags |= MFI_FRAME_SGL64; + pthru->sge_count = megasas_make_sgl64(instance, scp, + &pthru->sgl); + } else + pthru->sge_count = megasas_make_sgl32(instance, scp, + &pthru->sgl); + + /* + * Sense info specific + */ + pthru->sense_len = SCSI_SENSE_BUFFERSIZE; + pthru->sense_buf_phys_addr_hi = 0; + pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr; + + sge_bytes = sge_sz * pthru->sge_count; + + /* + * Compute the total number of frames this command consumes. FW uses + * this number to pull sufficient number of frames from host memory. + */ + cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) + + ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1; + + if (cmd->frame_count > 7) + cmd->frame_count = 8; + + return cmd->frame_count; +} + +/** + * megasas_build_ldio - Prepares IOs to logical devices + * @instance: Adapter soft state + * @scp: SCSI command + * @cmd: Command to to be prepared + * + * Frames (and accompanying SGLs) for regular SCSI IOs use this function. + */ +static inline int +megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp, + struct megasas_cmd *cmd) +{ + u32 sge_sz; + int sge_bytes; + u32 device_id; + u8 sc = scp->cmnd[0]; + u16 flags = 0; + struct megasas_io_frame *ldio; + + device_id = MEGASAS_DEV_INDEX(instance, scp); + ldio = (struct megasas_io_frame *)cmd->frame; + + if (scp->sc_data_direction == PCI_DMA_TODEVICE) + flags = MFI_FRAME_DIR_WRITE; + else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE) + flags = MFI_FRAME_DIR_READ; + + /* + * Preare the Logical IO frame: 2nd bit is zero for all read cmds + */ + ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ; + ldio->cmd_status = 0x0; + ldio->scsi_status = 0x0; + ldio->target_id = device_id; + ldio->timeout = 0; + ldio->reserved_0 = 0; + ldio->pad_0 = 0; + ldio->flags = flags; + ldio->start_lba_hi = 0; + ldio->access_byte = (scp->cmd_len != 6) ? scp->cmnd[1] : 0; + + /* + * 6-byte READ(0x08) or WRITE(0x0A) cdb + */ + if (scp->cmd_len == 6) { + ldio->lba_count = (u32) scp->cmnd[4]; + ldio->start_lba_lo = ((u32) scp->cmnd[1] << 16) | + ((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3]; + + ldio->start_lba_lo &= 0x1FFFFF; + } + + /* + * 10-byte READ(0x28) or WRITE(0x2A) cdb + */ + else if (scp->cmd_len == 10) { + ldio->lba_count = (u32) scp->cmnd[8] | + ((u32) scp->cmnd[7] << 8); + ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) | + ((u32) scp->cmnd[3] << 16) | + ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5]; + } + + /* + * 12-byte READ(0xA8) or WRITE(0xAA) cdb + */ + else if (scp->cmd_len == 12) { + ldio->lba_count = ((u32) scp->cmnd[6] << 24) | + ((u32) scp->cmnd[7] << 16) | + ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9]; + + ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) | + ((u32) scp->cmnd[3] << 16) | + ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5]; + } + + /* + * 16-byte READ(0x88) or WRITE(0x8A) cdb + */ + else if (scp->cmd_len == 16) { + ldio->lba_count = ((u32) scp->cmnd[10] << 24) | + ((u32) scp->cmnd[11] << 16) | + ((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13]; + + ldio->start_lba_lo = ((u32) scp->cmnd[6] << 24) | + ((u32) scp->cmnd[7] << 16) | + ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9]; + + ldio->start_lba_hi = ((u32) scp->cmnd[2] << 24) | + ((u32) scp->cmnd[3] << 16) | + ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5]; + + } + + /* + * Construct SGL + */ + sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) : + sizeof(struct megasas_sge32); + + if (IS_DMA64) { + ldio->flags |= MFI_FRAME_SGL64; + ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl); + } else + ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl); + + /* + * Sense info specific + */ + ldio->sense_len = SCSI_SENSE_BUFFERSIZE; + ldio->sense_buf_phys_addr_hi = 0; + ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr; + + sge_bytes = sge_sz * ldio->sge_count; + + cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) + + ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1; + + if (cmd->frame_count > 7) + cmd->frame_count = 8; + + return cmd->frame_count; +} + +/** + * megasas_build_cmd - Prepares a command packet + * @instance: Adapter soft state + * @scp: SCSI command + * @frame_count: [OUT] Number of frames used to prepare this command + */ +static inline struct megasas_cmd *megasas_build_cmd(struct megasas_instance + *instance, + struct scsi_cmnd *scp, + int *frame_count) +{ + u32 logical_cmd; + struct megasas_cmd *cmd; + + /* + * Find out if this is logical or physical drive command. + */ + logical_cmd = MEGASAS_IS_LOGICAL(scp); + + /* + * Logical drive command + */ + if (logical_cmd) { + + if (scp->device->id >= MEGASAS_MAX_LD) { + scp->result = DID_BAD_TARGET << 16; + return NULL; + } + + switch (scp->cmnd[0]) { + + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + case READ_16: + case WRITE_16: + /* + * Fail for LUN > 0 + */ + if (scp->device->lun) { + scp->result = DID_BAD_TARGET << 16; + return NULL; + } + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + scp->result = DID_IMM_RETRY << 16; + return NULL; + } + + *frame_count = megasas_build_ldio(instance, scp, cmd); + + if (!(*frame_count)) { + megasas_return_cmd(instance, cmd); + return NULL; + } + + return cmd; + + default: + /* + * Fail for LUN > 0 + */ + if (scp->device->lun) { + scp->result = DID_BAD_TARGET << 16; + return NULL; + } + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + scp->result = DID_IMM_RETRY << 16; + return NULL; + } + + *frame_count = megasas_build_dcdb(instance, scp, cmd); + + if (!(*frame_count)) { + megasas_return_cmd(instance, cmd); + return NULL; + } + + return cmd; + } + } else { + cmd = megasas_get_cmd(instance); + + if (!cmd) { + scp->result = DID_IMM_RETRY << 16; + return NULL; + } + + *frame_count = megasas_build_dcdb(instance, scp, cmd); + + if (!(*frame_count)) { + megasas_return_cmd(instance, cmd); + return NULL; + } + + return cmd; + } + + return NULL; +} + +/** + * megasas_queue_command - Queue entry point + * @scmd: SCSI command to be queued + * @done: Callback entry point + */ +static int +megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) +{ + u32 frame_count; + unsigned long flags; + struct megasas_cmd *cmd; + struct megasas_instance *instance; + + instance = (struct megasas_instance *) + scmd->device->host->hostdata; + scmd->scsi_done = done; + scmd->result = 0; + + cmd = megasas_build_cmd(instance, scmd, &frame_count); + + if (!cmd) { + done(scmd); + return 0; + } + + cmd->scmd = scmd; + scmd->SCp.ptr = (char *)cmd; + scmd->SCp.sent_command = jiffies; + + /* + * Issue the command to the FW + */ + spin_lock_irqsave(&instance->instance_lock, flags); + instance->fw_outstanding++; + spin_unlock_irqrestore(&instance->instance_lock, flags); + + writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)), + &instance->reg_set->inbound_queue_port); + + return 0; +} + +/** + * megasas_wait_for_outstanding - Wait for all outstanding cmds + * @instance: Adapter soft state + * + * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to + * complete all its outstanding commands. Returns error if one or more IOs + * are pending after this time period. It also marks the controller dead. + */ +static int megasas_wait_for_outstanding(struct megasas_instance *instance) +{ + int i; + u32 wait_time = MEGASAS_RESET_WAIT_TIME; + + for (i = 0; i < wait_time; i++) { + + if (!instance->fw_outstanding) + break; + + if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) { + printk(KERN_NOTICE "megasas: [%2d]waiting for %d " + "commands to complete\n", i, + instance->fw_outstanding); + } + + msleep(1000); + } + + if (instance->fw_outstanding) { + instance->hw_crit_error = 1; + return FAILED; + } + + return SUCCESS; +} + +/** + * megasas_generic_reset - Generic reset routine + * @scmd: Mid-layer SCSI command + * + * This routine implements a generic reset handler for device, bus and host + * reset requests. Device, bus and host specific reset handlers can use this + * function after they do their specific tasks. + */ +static int megasas_generic_reset(struct scsi_cmnd *scmd) +{ + int ret_val; + struct megasas_instance *instance; + + instance = (struct megasas_instance *)scmd->device->host->hostdata; + + printk(KERN_NOTICE "megasas: RESET -%ld cmd=%x <c=%d t=%d l=%d>\n", + scmd->serial_number, scmd->cmnd[0], scmd->device->channel, + scmd->device->id, scmd->device->lun); + + if (instance->hw_crit_error) { + printk(KERN_ERR "megasas: cannot recover from previous reset " + "failures\n"); + return FAILED; + } + + spin_unlock(scmd->device->host->host_lock); + + ret_val = megasas_wait_for_outstanding(instance); + + if (ret_val == SUCCESS) + printk(KERN_NOTICE "megasas: reset successful \n"); + else + printk(KERN_ERR "megasas: failed to do reset\n"); + + spin_lock(scmd->device->host->host_lock); + + return ret_val; +} + +static enum scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) +{ + unsigned long seconds; + + if (scmd->SCp.ptr) { + seconds = (jiffies - scmd->SCp.sent_command) / HZ; + + if (seconds < 90) { + return EH_RESET_TIMER; + } else { + return EH_NOT_HANDLED; + } + } + + return EH_HANDLED; +} + +/** + * megasas_reset_device - Device reset handler entry point + */ +static int megasas_reset_device(struct scsi_cmnd *scmd) +{ + int ret; + + /* + * First wait for all commands to complete + */ + ret = megasas_generic_reset(scmd); + + return ret; +} + +/** + * megasas_reset_bus_host - Bus & host reset handler entry point + */ +static int megasas_reset_bus_host(struct scsi_cmnd *scmd) +{ + int ret; + + /* + * Frist wait for all commands to complete + */ + ret = megasas_generic_reset(scmd); + + return ret; +} + +/** + * megasas_service_aen - Processes an event notification + * @instance: Adapter soft state + * @cmd: AEN command completed by the ISR + * + * For AEN, driver sends a command down to FW that is held by the FW till an + * event occurs. When an event of interest occurs, FW completes the command + * that it was previously holding. + * + * This routines sends SIGIO signal to processes that have registered with the + * driver for AEN. + */ +static void +megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + /* + * Don't signal app if it is just an aborted previously registered aen + */ + if (!cmd->abort_aen) + kill_fasync(&megasas_async_queue, SIGIO, POLL_IN); + else + cmd->abort_aen = 0; + + instance->aen_cmd = NULL; + megasas_return_cmd(instance, cmd); +} + +/* + * Scsi host template for megaraid_sas driver + */ +static struct scsi_host_template megasas_template = { + + .module = THIS_MODULE, + .name = "LSI Logic SAS based MegaRAID driver", + .proc_name = "megaraid_sas", + .queuecommand = megasas_queue_command, + .eh_device_reset_handler = megasas_reset_device, + .eh_bus_reset_handler = megasas_reset_bus_host, + .eh_host_reset_handler = megasas_reset_bus_host, + .eh_timed_out = megasas_reset_timer, + .use_clustering = ENABLE_CLUSTERING, +}; + +/** + * megasas_complete_int_cmd - Completes an internal command + * @instance: Adapter soft state + * @cmd: Command to be completed + * + * The megasas_issue_blocked_cmd() function waits for a command to complete + * after it issues a command. This function wakes up that waiting routine by + * calling wake_up() on the wait queue. + */ +static void +megasas_complete_int_cmd(struct megasas_instance *instance, + struct megasas_cmd *cmd) +{ + cmd->cmd_status = cmd->frame->io.cmd_status; + + if (cmd->cmd_status == ENODATA) { + cmd->cmd_status = 0; + } + wake_up(&instance->int_cmd_wait_q); +} + +/** + * megasas_complete_abort - Completes aborting a command + * @instance: Adapter soft state + * @cmd: Cmd that was issued to abort another cmd + * + * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q + * after it issues an abort on a previously issued command. This function + * wakes up all functions waiting on the same wait queue. + */ +static void +megasas_complete_abort(struct megasas_instance *instance, + struct megasas_cmd *cmd) +{ + if (cmd->sync_cmd) { + cmd->sync_cmd = 0; + cmd->cmd_status = 0; + wake_up(&instance->abort_cmd_wait_q); + } + + return; +} + +/** + * megasas_unmap_sgbuf - Unmap SG buffers + * @instance: Adapter soft state + * @cmd: Completed command + */ +static inline void +megasas_unmap_sgbuf(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + dma_addr_t buf_h; + u8 opcode; + + if (cmd->scmd->use_sg) { + pci_unmap_sg(instance->pdev, cmd->scmd->request_buffer, + cmd->scmd->use_sg, cmd->scmd->sc_data_direction); + return; + } + + if (!cmd->scmd->request_bufflen) + return; + + opcode = cmd->frame->hdr.cmd; + + if ((opcode == MFI_CMD_LD_READ) || (opcode == MFI_CMD_LD_WRITE)) { + if (IS_DMA64) + buf_h = cmd->frame->io.sgl.sge64[0].phys_addr; + else + buf_h = cmd->frame->io.sgl.sge32[0].phys_addr; + } else { + if (IS_DMA64) + buf_h = cmd->frame->pthru.sgl.sge64[0].phys_addr; + else + buf_h = cmd->frame->pthru.sgl.sge32[0].phys_addr; + } + + pci_unmap_single(instance->pdev, buf_h, cmd->scmd->request_bufflen, + cmd->scmd->sc_data_direction); + return; +} + +/** + * megasas_complete_cmd - Completes a command + * @instance: Adapter soft state + * @cmd: Command to be completed + * @alt_status: If non-zero, use this value as status to + * SCSI mid-layer instead of the value returned + * by the FW. This should be used if caller wants + * an alternate status (as in the case of aborted + * commands) + */ +static inline void +megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, + u8 alt_status) +{ + int exception = 0; + struct megasas_header *hdr = &cmd->frame->hdr; + unsigned long flags; + + if (cmd->scmd) { + cmd->scmd->SCp.ptr = (char *)0; + } + + switch (hdr->cmd) { + + case MFI_CMD_PD_SCSI_IO: + case MFI_CMD_LD_SCSI_IO: + + /* + * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been + * issued either through an IO path or an IOCTL path. If it + * was via IOCTL, we will send it to internal completion. + */ + if (cmd->sync_cmd) { + cmd->sync_cmd = 0; + megasas_complete_int_cmd(instance, cmd); + break; + } + + /* + * Don't export physical disk devices to mid-layer. + */ + if (!MEGASAS_IS_LOGICAL(cmd->scmd) && + (hdr->cmd_status == MFI_STAT_OK) && + (cmd->scmd->cmnd[0] == INQUIRY)) { + + if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) == + TYPE_DISK) { + cmd->scmd->result = DID_BAD_TARGET << 16; + exception = 1; + } + } + + case MFI_CMD_LD_READ: + case MFI_CMD_LD_WRITE: + + if (alt_status) { + cmd->scmd->result = alt_status << 16; + exception = 1; + } + + if (exception) { + + spin_lock_irqsave(&instance->instance_lock, flags); + instance->fw_outstanding--; + spin_unlock_irqrestore(&instance->instance_lock, flags); + + megasas_unmap_sgbuf(instance, cmd); + cmd->scmd->scsi_done(cmd->scmd); + megasas_return_cmd(instance, cmd); + + break; + } + + switch (hdr->cmd_status) { + + case MFI_STAT_OK: + cmd->scmd->result = DID_OK << 16; + break; + + case MFI_STAT_SCSI_IO_FAILED: + case MFI_STAT_LD_INIT_IN_PROGRESS: + cmd->scmd->result = + (DID_ERROR << 16) | hdr->scsi_status; + break; + + case MFI_STAT_SCSI_DONE_WITH_ERROR: + + cmd->scmd->result = (DID_OK << 16) | hdr->scsi_status; + + if (hdr->scsi_status == SAM_STAT_CHECK_CONDITION) { + memset(cmd->scmd->sense_buffer, 0, + SCSI_SENSE_BUFFERSIZE); + memcpy(cmd->scmd->sense_buffer, cmd->sense, + hdr->sense_len); + + cmd->scmd->result |= DRIVER_SENSE << 24; + } + + break; + + case MFI_STAT_LD_OFFLINE: + case MFI_STAT_DEVICE_NOT_FOUND: + cmd->scmd->result = DID_BAD_TARGET << 16; + break; + + default: + printk(KERN_DEBUG "megasas: MFI FW status %#x\n", + hdr->cmd_status); + cmd->scmd->result = DID_ERROR << 16; + break; + } + + spin_lock_irqsave(&instance->instance_lock, flags); + instance->fw_outstanding--; + spin_unlock_irqrestore(&instance->instance_lock, flags); + + megasas_unmap_sgbuf(instance, cmd); + cmd->scmd->scsi_done(cmd->scmd); + megasas_return_cmd(instance, cmd); + + break; + + case MFI_CMD_SMP: + case MFI_CMD_STP: + case MFI_CMD_DCMD: + + /* + * See if got an event notification + */ + if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT) + megasas_service_aen(instance, cmd); + else + megasas_complete_int_cmd(instance, cmd); + + break; + + case MFI_CMD_ABORT: + /* + * Cmd issued to abort another cmd returned + */ + megasas_complete_abort(instance, cmd); + break; + + default: + printk("megasas: Unknown command completed! [0x%X]\n", + hdr->cmd); + break; + } +} + +/** + * megasas_deplete_reply_queue - Processes all completed commands + * @instance: Adapter soft state + * @alt_status: Alternate status to be returned to + * SCSI mid-layer instead of the status + * returned by the FW + */ +static inline int +megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status) +{ + u32 status; + u32 producer; + u32 consumer; + u32 context; + struct megasas_cmd *cmd; + + /* + * Check if it is our interrupt + */ + status = readl(&instance->reg_set->outbound_intr_status); + + if (!(status & MFI_OB_INTR_STATUS_MASK)) { + return IRQ_NONE; + } + + /* + * Clear the interrupt by writing back the same value + */ + writel(status, &instance->reg_set->outbound_intr_status); + + producer = *instance->producer; + consumer = *instance->consumer; + + while (consumer != producer) { + context = instance->reply_queue[consumer]; + + cmd = instance->cmd_list[context]; + + megasas_complete_cmd(instance, cmd, alt_status); + + consumer++; + if (consumer == (instance->max_fw_cmds + 1)) { + consumer = 0; + } + } + + *instance->consumer = producer; + + return IRQ_HANDLED; +} + +/** + * megasas_isr - isr entry point + */ +static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs) +{ + return megasas_deplete_reply_queue((struct megasas_instance *)devp, + DID_OK); +} + +/** + * megasas_transition_to_ready - Move the FW to READY state + * @reg_set: MFI register set + * + * During the initialization, FW passes can potentially be in any one of + * several possible states. If the FW in operational, waiting-for-handshake + * states, driver must take steps to bring it to ready state. Otherwise, it + * has to wait for the ready state. + */ +static int +megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set) +{ + int i; + u8 max_wait; + u32 fw_state; + u32 cur_state; + + fw_state = readl(®_set->outbound_msg_0) & MFI_STATE_MASK; + + while (fw_state != MFI_STATE_READY) { + + printk(KERN_INFO "megasas: Waiting for FW to come to ready" + " state\n"); + switch (fw_state) { + + case MFI_STATE_FAULT: + + printk(KERN_DEBUG "megasas: FW in FAULT state!!\n"); + return -ENODEV; + + case MFI_STATE_WAIT_HANDSHAKE: + /* + * Set the CLR bit in inbound doorbell + */ + writel(MFI_INIT_CLEAR_HANDSHAKE, + ®_set->inbound_doorbell); + + max_wait = 2; + cur_state = MFI_STATE_WAIT_HANDSHAKE; + break; + + case MFI_STATE_OPERATIONAL: + /* + * Bring it to READY state; assuming max wait 2 secs + */ + megasas_disable_intr(reg_set); + writel(MFI_INIT_READY, ®_set->inbound_doorbell); + + max_wait = 10; + cur_state = MFI_STATE_OPERATIONAL; + break; + + case MFI_STATE_UNDEFINED: + /* + * This state should not last for more than 2 seconds + */ + max_wait = 2; + cur_state = MFI_STATE_UNDEFINED; + break; + + case MFI_STATE_BB_INIT: + max_wait = 2; + cur_state = MFI_STATE_BB_INIT; + break; + + case MFI_STATE_FW_INIT: + max_wait = 20; + cur_state = MFI_STATE_FW_INIT; + break; + + case MFI_STATE_FW_INIT_2: + max_wait = 20; + cur_state = MFI_STATE_FW_INIT_2; + break; + + case MFI_STATE_DEVICE_SCAN: + max_wait = 20; + cur_state = MFI_STATE_DEVICE_SCAN; + break; + + case MFI_STATE_FLUSH_CACHE: + max_wait = 20; + cur_state = MFI_STATE_FLUSH_CACHE; + break; + + default: + printk(KERN_DEBUG "megasas: Unknown state 0x%x\n", + fw_state); + return -ENODEV; + } + + /* + * The cur_state should not last for more than max_wait secs + */ + for (i = 0; i < (max_wait * 1000); i++) { + fw_state = MFI_STATE_MASK & + readl(®_set->outbound_msg_0); + + if (fw_state == cur_state) { + msleep(1); + } else + break; + } + + /* + * Return error if fw_state hasn't changed after max_wait + */ + if (fw_state == cur_state) { + printk(KERN_DEBUG "FW state [%d] hasn't changed " + "in %d secs\n", fw_state, max_wait); + return -ENODEV; + } + }; + + return 0; +} + +/** + * megasas_teardown_frame_pool - Destroy the cmd frame DMA pool + * @instance: Adapter soft state + */ +static void megasas_teardown_frame_pool(struct megasas_instance *instance) +{ + int i; + u32 max_cmd = instance->max_fw_cmds; + struct megasas_cmd *cmd; + + if (!instance->frame_dma_pool) + return; + + /* + * Return all frames to pool + */ + for (i = 0; i < max_cmd; i++) { + + cmd = instance->cmd_list[i]; + + if (cmd->frame) + pci_pool_free(instance->frame_dma_pool, cmd->frame, + cmd->frame_phys_addr); + + if (cmd->sense) + pci_pool_free(instance->sense_dma_pool, cmd->frame, + cmd->sense_phys_addr); + } + + /* + * Now destroy the pool itself + */ + pci_pool_destroy(instance->frame_dma_pool); + pci_pool_destroy(instance->sense_dma_pool); + + instance->frame_dma_pool = NULL; + instance->sense_dma_pool = NULL; +} + +/** + * megasas_create_frame_pool - Creates DMA pool for cmd frames + * @instance: Adapter soft state + * + * Each command packet has an embedded DMA memory buffer that is used for + * filling MFI frame and the SG list that immediately follows the frame. This + * function creates those DMA memory buffers for each command packet by using + * PCI pool facility. + */ +static int megasas_create_frame_pool(struct megasas_instance *instance) +{ + int i; + u32 max_cmd; + u32 sge_sz; + u32 sgl_sz; + u32 total_sz; + u32 frame_count; + struct megasas_cmd *cmd; + + max_cmd = instance->max_fw_cmds; + + /* + * Size of our frame is 64 bytes for MFI frame, followed by max SG + * elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer + */ + sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) : + sizeof(struct megasas_sge32); + + /* + * Calculated the number of 64byte frames required for SGL + */ + sgl_sz = sge_sz * instance->max_num_sge; + frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE; + + /* + * We need one extra frame for the MFI command + */ + frame_count++; + + total_sz = MEGAMFI_FRAME_SIZE * frame_count; + /* + * Use DMA pool facility provided by PCI layer + */ + instance->frame_dma_pool = pci_pool_create("megasas frame pool", + instance->pdev, total_sz, 64, + 0); + + if (!instance->frame_dma_pool) { + printk(KERN_DEBUG "megasas: failed to setup frame pool\n"); + return -ENOMEM; + } + + instance->sense_dma_pool = pci_pool_create("megasas sense pool", + instance->pdev, 128, 4, 0); + + if (!instance->sense_dma_pool) { + printk(KERN_DEBUG "megasas: failed to setup sense pool\n"); + + pci_pool_destroy(instance->frame_dma_pool); + instance->frame_dma_pool = NULL; + + return -ENOMEM; + } + + /* + * Allocate and attach a frame to each of the commands in cmd_list. + * By making cmd->index as the context instead of the &cmd, we can + * always use 32bit context regardless of the architecture + */ + for (i = 0; i < max_cmd; i++) { + + cmd = instance->cmd_list[i]; + + cmd->frame = pci_pool_alloc(instance->frame_dma_pool, + GFP_KERNEL, &cmd->frame_phys_addr); + + cmd->sense = pci_pool_alloc(instance->sense_dma_pool, + GFP_KERNEL, &cmd->sense_phys_addr); + + /* + * megasas_teardown_frame_pool() takes care of freeing + * whatever has been allocated + */ + if (!cmd->frame || !cmd->sense) { + printk(KERN_DEBUG "megasas: pci_pool_alloc failed \n"); + megasas_teardown_frame_pool(instance); + return -ENOMEM; + } + + cmd->frame->io.context = cmd->index; + } + + return 0; +} + +/** + * megasas_free_cmds - Free all the cmds in the free cmd pool + * @instance: Adapter soft state + */ +static void megasas_free_cmds(struct megasas_instance *instance) +{ + int i; + /* First free the MFI frame pool */ + megasas_teardown_frame_pool(instance); + + /* Free all the commands in the cmd_list */ + for (i = 0; i < instance->max_fw_cmds; i++) + kfree(instance->cmd_list[i]); + + /* Free the cmd_list buffer itself */ + kfree(instance->cmd_list); + instance->cmd_list = NULL; + + INIT_LIST_HEAD(&instance->cmd_pool); +} + +/** + * megasas_alloc_cmds - Allocates the command packets + * @instance: Adapter soft state + * + * Each command that is issued to the FW, whether IO commands from the OS or + * internal commands like IOCTLs, are wrapped in local data structure called + * megasas_cmd. The frame embedded in this megasas_cmd is actually issued to + * the FW. + * + * Each frame has a 32-bit field called context (tag). This context is used + * to get back the megasas_cmd from the frame when a frame gets completed in + * the ISR. Typically the address of the megasas_cmd itself would be used as + * the context. But we wanted to keep the differences between 32 and 64 bit + * systems to the mininum. We always use 32 bit integers for the context. In + * this driver, the 32 bit values are the indices into an array cmd_list. + * This array is used only to look up the megasas_cmd given the context. The + * free commands themselves are maintained in a linked list called cmd_pool. + */ +static int megasas_alloc_cmds(struct megasas_instance *instance) +{ + int i; + int j; + u32 max_cmd; + struct megasas_cmd *cmd; + + max_cmd = instance->max_fw_cmds; + + /* + * instance->cmd_list is an array of struct megasas_cmd pointers. + * Allocate the dynamic array first and then allocate individual + * commands. + */ + instance->cmd_list = kmalloc(sizeof(struct megasas_cmd *) * max_cmd, + GFP_KERNEL); + + if (!instance->cmd_list) { + printk(KERN_DEBUG "megasas: out of memory\n"); + return -ENOMEM; + } + + memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) * max_cmd); + + for (i = 0; i < max_cmd; i++) { + instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd), + GFP_KERNEL); + + if (!instance->cmd_list[i]) { + + for (j = 0; j < i; j++) + kfree(instance->cmd_list[j]); + + kfree(instance->cmd_list); + instance->cmd_list = NULL; + + return -ENOMEM; + } + } + + /* + * Add all the commands to command pool (instance->cmd_pool) + */ + for (i = 0; i < max_cmd; i++) { + cmd = instance->cmd_list[i]; + memset(cmd, 0, sizeof(struct megasas_cmd)); + cmd->index = i; + cmd->instance = instance; + + list_add_tail(&cmd->list, &instance->cmd_pool); + } + + /* + * Create a frame pool and assign one frame to each cmd + */ + if (megasas_create_frame_pool(instance)) { + printk(KERN_DEBUG "megasas: Error creating frame DMA pool\n"); + megasas_free_cmds(instance); + } + + return 0; +} + +/** + * megasas_get_controller_info - Returns FW's controller structure + * @instance: Adapter soft state + * @ctrl_info: Controller information structure + * + * Issues an internal command (DCMD) to get the FW's controller structure. + * This information is mainly used to find out the maximum IO transfer per + * command supported by the FW. + */ +static int +megasas_get_ctrl_info(struct megasas_instance *instance, + struct megasas_ctrl_info *ctrl_info) +{ + int ret = 0; + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + struct megasas_ctrl_info *ci; + dma_addr_t ci_h = 0; + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + printk(KERN_DEBUG "megasas: Failed to get a free cmd\n"); + return -ENOMEM; + } + + dcmd = &cmd->frame->dcmd; + + ci = pci_alloc_consistent(instance->pdev, + sizeof(struct megasas_ctrl_info), &ci_h); + + if (!ci) { + printk(KERN_DEBUG "Failed to alloc mem for ctrl info\n"); + megasas_return_cmd(instance, cmd); + return -ENOMEM; + } + + memset(ci, 0, sizeof(*ci)); + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0xFF; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->data_xfer_len = sizeof(struct megasas_ctrl_info); + dcmd->opcode = MR_DCMD_CTRL_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = ci_h; + dcmd->sgl.sge32[0].length = sizeof(struct megasas_ctrl_info); + + if (!megasas_issue_polled(instance, cmd)) { + ret = 0; + memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info)); + } else { + ret = -1; + } + + pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info), + ci, ci_h); + + megasas_return_cmd(instance, cmd); + return ret; +} + +/** + * megasas_init_mfi - Initializes the FW + * @instance: Adapter soft state + * + * This is the main function for initializing MFI firmware. + */ +static int megasas_init_mfi(struct megasas_instance *instance) +{ + u32 context_sz; + u32 reply_q_sz; + u32 max_sectors_1; + u32 max_sectors_2; + struct megasas_register_set __iomem *reg_set; + + struct megasas_cmd *cmd; + struct megasas_ctrl_info *ctrl_info; + + struct megasas_init_frame *init_frame; + struct megasas_init_queue_info *initq_info; + dma_addr_t init_frame_h; + dma_addr_t initq_info_h; + + /* + * Map the message registers + */ + instance->base_addr = pci_resource_start(instance->pdev, 0); + + if (pci_request_regions(instance->pdev, "megasas: LSI Logic")) { + printk(KERN_DEBUG "megasas: IO memory region busy!\n"); + return -EBUSY; + } + + instance->reg_set = ioremap_nocache(instance->base_addr, 8192); + + if (!instance->reg_set) { + printk(KERN_DEBUG "megasas: Failed to map IO mem\n"); + goto fail_ioremap; + } + + reg_set = instance->reg_set; + + /* + * We expect the FW state to be READY + */ + if (megasas_transition_to_ready(instance->reg_set)) + goto fail_ready_state; + + /* + * Get various operational parameters from status register + */ + instance->max_fw_cmds = readl(®_set->outbound_msg_0) & 0x00FFFF; + instance->max_num_sge = (readl(®_set->outbound_msg_0) & 0xFF0000) >> + 0x10; + /* + * Create a pool of commands + */ + if (megasas_alloc_cmds(instance)) + goto fail_alloc_cmds; + + /* + * Allocate memory for reply queue. Length of reply queue should + * be _one_ more than the maximum commands handled by the firmware. + * + * Note: When FW completes commands, it places corresponding contex + * values in this circular reply queue. This circular queue is a fairly + * typical producer-consumer queue. FW is the producer (of completed + * commands) and the driver is the consumer. + */ + context_sz = sizeof(u32); + reply_q_sz = context_sz * (instance->max_fw_cmds + 1); + + instance->reply_queue = pci_alloc_consistent(instance->pdev, + reply_q_sz, + &instance->reply_queue_h); + + if (!instance->reply_queue) { + printk(KERN_DEBUG "megasas: Out of DMA mem for reply queue\n"); + goto fail_reply_queue; + } + + /* + * Prepare a init frame. Note the init frame points to queue info + * structure. Each frame has SGL allocated after first 64 bytes. For + * this frame - since we don't need any SGL - we use SGL's space as + * queue info structure + * + * We will not get a NULL command below. We just created the pool. + */ + cmd = megasas_get_cmd(instance); + + init_frame = (struct megasas_init_frame *)cmd->frame; + initq_info = (struct megasas_init_queue_info *) + ((unsigned long)init_frame + 64); + + init_frame_h = cmd->frame_phys_addr; + initq_info_h = init_frame_h + 64; + + memset(init_frame, 0, MEGAMFI_FRAME_SIZE); + memset(initq_info, 0, sizeof(struct megasas_init_queue_info)); + + initq_info->reply_queue_entries = instance->max_fw_cmds + 1; + initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h; + + initq_info->producer_index_phys_addr_lo = instance->producer_h; + initq_info->consumer_index_phys_addr_lo = instance->consumer_h; + + init_frame->cmd = MFI_CMD_INIT; + init_frame->cmd_status = 0xFF; + init_frame->queue_info_new_phys_addr_lo = initq_info_h; + + init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info); + + /* + * Issue the init frame in polled mode + */ + if (megasas_issue_polled(instance, cmd)) { + printk(KERN_DEBUG "megasas: Failed to init firmware\n"); + goto fail_fw_init; + } + + megasas_return_cmd(instance, cmd); + + ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL); + + /* + * Compute the max allowed sectors per IO: The controller info has two + * limits on max sectors. Driver should use the minimum of these two. + * + * 1 << stripe_sz_ops.min = max sectors per strip + * + * Note that older firmwares ( < FW ver 30) didn't report information + * to calculate max_sectors_1. So the number ended up as zero always. + */ + if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) { + + max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) * + ctrl_info->max_strips_per_io; + max_sectors_2 = ctrl_info->max_request_size; + + instance->max_sectors_per_req = (max_sectors_1 < max_sectors_2) + ? max_sectors_1 : max_sectors_2; + } else + instance->max_sectors_per_req = instance->max_num_sge * + PAGE_SIZE / 512; + + kfree(ctrl_info); + + return 0; + + fail_fw_init: + megasas_return_cmd(instance, cmd); + + pci_free_consistent(instance->pdev, reply_q_sz, + instance->reply_queue, instance->reply_queue_h); + fail_reply_queue: + megasas_free_cmds(instance); + + fail_alloc_cmds: + fail_ready_state: + iounmap(instance->reg_set); + + fail_ioremap: + pci_release_regions(instance->pdev); + + return -EINVAL; +} + +/** + * megasas_release_mfi - Reverses the FW initialization + * @intance: Adapter soft state + */ +static void megasas_release_mfi(struct megasas_instance *instance) +{ + u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1); + + pci_free_consistent(instance->pdev, reply_q_sz, + instance->reply_queue, instance->reply_queue_h); + + megasas_free_cmds(instance); + + iounmap(instance->reg_set); + + pci_release_regions(instance->pdev); +} + +/** + * megasas_get_seq_num - Gets latest event sequence numbers + * @instance: Adapter soft state + * @eli: FW event log sequence numbers information + * + * FW maintains a log of all events in a non-volatile area. Upper layers would + * usually find out the latest sequence number of the events, the seq number at + * the boot etc. They would "read" all the events below the latest seq number + * by issuing a direct fw cmd (DCMD). For the future events (beyond latest seq + * number), they would subsribe to AEN (asynchronous event notification) and + * wait for the events to happen. + */ +static int +megasas_get_seq_num(struct megasas_instance *instance, + struct megasas_evt_log_info *eli) +{ + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + struct megasas_evt_log_info *el_info; + dma_addr_t el_info_h = 0; + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + return -ENOMEM; + } + + dcmd = &cmd->frame->dcmd; + el_info = pci_alloc_consistent(instance->pdev, + sizeof(struct megasas_evt_log_info), + &el_info_h); + + if (!el_info) { + megasas_return_cmd(instance, cmd); + return -ENOMEM; + } + + memset(el_info, 0, sizeof(*el_info)); + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->data_xfer_len = sizeof(struct megasas_evt_log_info); + dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = el_info_h; + dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_log_info); + + megasas_issue_blocked_cmd(instance, cmd); + + /* + * Copy the data back into callers buffer + */ + memcpy(eli, el_info, sizeof(struct megasas_evt_log_info)); + + pci_free_consistent(instance->pdev, sizeof(struct megasas_evt_log_info), + el_info, el_info_h); + + megasas_return_cmd(instance, cmd); + + return 0; +} + +/** + * megasas_register_aen - Registers for asynchronous event notification + * @instance: Adapter soft state + * @seq_num: The starting sequence number + * @class_locale: Class of the event + * + * This function subscribes for AEN for events beyond the @seq_num. It requests + * to be notified if and only if the event is of type @class_locale + */ +static int +megasas_register_aen(struct megasas_instance *instance, u32 seq_num, + u32 class_locale_word) +{ + int ret_val; + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + union megasas_evt_class_locale curr_aen; + union megasas_evt_class_locale prev_aen; + + /* + * If there an AEN pending already (aen_cmd), check if the + * class_locale of that pending AEN is inclusive of the new + * AEN request we currently have. If it is, then we don't have + * to do anything. In other words, whichever events the current + * AEN request is subscribing to, have already been subscribed + * to. + * + * If the old_cmd is _not_ inclusive, then we have to abort + * that command, form a class_locale that is superset of both + * old and current and re-issue to the FW + */ + + curr_aen.word = class_locale_word; + + if (instance->aen_cmd) { + + prev_aen.word = instance->aen_cmd->frame->dcmd.mbox.w[1]; + + /* + * A class whose enum value is smaller is inclusive of all + * higher values. If a PROGRESS (= -1) was previously + * registered, then a new registration requests for higher + * classes need not be sent to FW. They are automatically + * included. + * + * Locale numbers don't have such hierarchy. They are bitmap + * values + */ + if ((prev_aen.members.class <= curr_aen.members.class) && + !((prev_aen.members.locale & curr_aen.members.locale) ^ + curr_aen.members.locale)) { + /* + * Previously issued event registration includes + * current request. Nothing to do. + */ + return 0; + } else { + curr_aen.members.locale |= prev_aen.members.locale; + + if (prev_aen.members.class < curr_aen.members.class) + curr_aen.members.class = prev_aen.members.class; + + instance->aen_cmd->abort_aen = 1; + ret_val = megasas_issue_blocked_abort_cmd(instance, + instance-> + aen_cmd); + + if (ret_val) { + printk(KERN_DEBUG "megasas: Failed to abort " + "previous AEN command\n"); + return ret_val; + } + } + } + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return -ENOMEM; + + dcmd = &cmd->frame->dcmd; + + memset(instance->evt_detail, 0, sizeof(struct megasas_evt_detail)); + + /* + * Prepare DCMD for aen registration + */ + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->data_xfer_len = sizeof(struct megasas_evt_detail); + dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT; + dcmd->mbox.w[0] = seq_num; + dcmd->mbox.w[1] = curr_aen.word; + dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h; + dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail); + + /* + * Store reference to the cmd used to register for AEN. When an + * application wants us to register for AEN, we have to abort this + * cmd and re-register with a new EVENT LOCALE supplied by that app + */ + instance->aen_cmd = cmd; + + /* + * Issue the aen registration frame + */ + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + return 0; +} + +/** + * megasas_start_aen - Subscribes to AEN during driver load time + * @instance: Adapter soft state + */ +static int megasas_start_aen(struct megasas_instance *instance) +{ + struct megasas_evt_log_info eli; + union megasas_evt_class_locale class_locale; + + /* + * Get the latest sequence number from FW + */ + memset(&eli, 0, sizeof(eli)); + + if (megasas_get_seq_num(instance, &eli)) + return -1; + + /* + * Register AEN with FW for latest sequence number plus 1 + */ + class_locale.members.reserved = 0; + class_locale.members.locale = MR_EVT_LOCALE_ALL; + class_locale.members.class = MR_EVT_CLASS_DEBUG; + + return megasas_register_aen(instance, eli.newest_seq_num + 1, + class_locale.word); +} + +/** + * megasas_io_attach - Attaches this driver to SCSI mid-layer + * @instance: Adapter soft state + */ +static int megasas_io_attach(struct megasas_instance *instance) +{ + struct Scsi_Host *host = instance->host; + + /* + * Export parameters required by SCSI mid-layer + */ + host->irq = instance->pdev->irq; + host->unique_id = instance->unique_id; + host->can_queue = instance->max_fw_cmds - MEGASAS_INT_CMDS; + host->this_id = instance->init_id; + host->sg_tablesize = instance->max_num_sge; + host->max_sectors = instance->max_sectors_per_req; + host->cmd_per_lun = 128; + host->max_channel = MEGASAS_MAX_CHANNELS - 1; + host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL; + host->max_lun = MEGASAS_MAX_LUN; + + /* + * Notify the mid-layer about the new controller + */ + if (scsi_add_host(host, &instance->pdev->dev)) { + printk(KERN_DEBUG "megasas: scsi_add_host failed\n"); + return -ENODEV; + } + + /* + * Trigger SCSI to scan our drives + */ + scsi_scan_host(host); + return 0; +} + +/** + * megasas_probe_one - PCI hotplug entry point + * @pdev: PCI device structure + * @id: PCI ids of supported hotplugged adapter + */ +static int __devinit +megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int rval; + struct Scsi_Host *host; + struct megasas_instance *instance; + + /* + * Announce PCI information + */ + printk(KERN_INFO "megasas: %#4.04x:%#4.04x:%#4.04x:%#4.04x: ", + pdev->vendor, pdev->device, pdev->subsystem_vendor, + pdev->subsystem_device); + + printk("bus %d:slot %d:func %d\n", + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* + * PCI prepping: enable device set bus mastering and dma mask + */ + rval = pci_enable_device(pdev); + + if (rval) { + return rval; + } + + pci_set_master(pdev); + + /* + * All our contollers are capable of performing 64-bit DMA + */ + if (IS_DMA64) { + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) { + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) + goto fail_set_dma_mask; + } + } else { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) + goto fail_set_dma_mask; + } + + host = scsi_host_alloc(&megasas_template, + sizeof(struct megasas_instance)); + + if (!host) { + printk(KERN_DEBUG "megasas: scsi_host_alloc failed\n"); + goto fail_alloc_instance; + } + + instance = (struct megasas_instance *)host->hostdata; + memset(instance, 0, sizeof(*instance)); + + instance->producer = pci_alloc_consistent(pdev, sizeof(u32), + &instance->producer_h); + instance->consumer = pci_alloc_consistent(pdev, sizeof(u32), + &instance->consumer_h); + + if (!instance->producer || !instance->consumer) { + printk(KERN_DEBUG "megasas: Failed to allocate memory for " + "producer, consumer\n"); + goto fail_alloc_dma_buf; + } + + *instance->producer = 0; + *instance->consumer = 0; + + instance->evt_detail = pci_alloc_consistent(pdev, + sizeof(struct + megasas_evt_detail), + &instance->evt_detail_h); + + if (!instance->evt_detail) { + printk(KERN_DEBUG "megasas: Failed to allocate memory for " + "event detail structure\n"); + goto fail_alloc_dma_buf; + } + + /* + * Initialize locks and queues + */ + INIT_LIST_HEAD(&instance->cmd_pool); + + init_waitqueue_head(&instance->int_cmd_wait_q); + init_waitqueue_head(&instance->abort_cmd_wait_q); + + spin_lock_init(&instance->cmd_pool_lock); + spin_lock_init(&instance->instance_lock); + + sema_init(&instance->aen_mutex, 1); + sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS); + + /* + * Initialize PCI related and misc parameters + */ + instance->pdev = pdev; + instance->host = host; + instance->unique_id = pdev->bus->number << 8 | pdev->devfn; + instance->init_id = MEGASAS_DEFAULT_INIT_ID; + + /* + * Initialize MFI Firmware + */ + if (megasas_init_mfi(instance)) + goto fail_init_mfi; + + /* + * Register IRQ + */ + if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas", instance)) { + printk(KERN_DEBUG "megasas: Failed to register IRQ\n"); + goto fail_irq; + } + + megasas_enable_intr(instance->reg_set); + + /* + * Store instance in PCI softstate + */ + pci_set_drvdata(pdev, instance); + + /* + * Add this controller to megasas_mgmt_info structure so that it + * can be exported to management applications + */ + megasas_mgmt_info.count++; + megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance; + megasas_mgmt_info.max_index++; + + /* + * Initiate AEN (Asynchronous Event Notification) + */ + if (megasas_start_aen(instance)) { + printk(KERN_DEBUG "megasas: start aen failed\n"); + goto fail_start_aen; + } + + /* + * Register with SCSI mid-layer + */ + if (megasas_io_attach(instance)) + goto fail_io_attach; + + return 0; + + fail_start_aen: + fail_io_attach: + megasas_mgmt_info.count--; + megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL; + megasas_mgmt_info.max_index--; + + pci_set_drvdata(pdev, NULL); + megasas_disable_intr(instance->reg_set); + free_irq(instance->pdev->irq, instance); + + megasas_release_mfi(instance); + + fail_irq: + fail_init_mfi: + fail_alloc_dma_buf: + if (instance->evt_detail) + pci_free_consistent(pdev, sizeof(struct megasas_evt_detail), + instance->evt_detail, + instance->evt_detail_h); + + if (instance->producer) + pci_free_consistent(pdev, sizeof(u32), instance->producer, + instance->producer_h); + if (instance->consumer) + pci_free_consistent(pdev, sizeof(u32), instance->consumer, + instance->consumer_h); + scsi_host_put(host); + + fail_alloc_instance: + fail_set_dma_mask: + pci_disable_device(pdev); + + return -ENODEV; +} + +/** + * megasas_flush_cache - Requests FW to flush all its caches + * @instance: Adapter soft state + */ +static void megasas_flush_cache(struct megasas_instance *instance) +{ + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return; + + dcmd = &cmd->frame->dcmd; + + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 0; + dcmd->flags = MFI_FRAME_DIR_NONE; + dcmd->timeout = 0; + dcmd->data_xfer_len = 0; + dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH; + dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE; + + megasas_issue_blocked_cmd(instance, cmd); + + megasas_return_cmd(instance, cmd); + + return; +} + +/** + * megasas_shutdown_controller - Instructs FW to shutdown the controller + * @instance: Adapter soft state + */ +static void megasas_shutdown_controller(struct megasas_instance *instance) +{ + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return; + + if (instance->aen_cmd) + megasas_issue_blocked_abort_cmd(instance, instance->aen_cmd); + + dcmd = &cmd->frame->dcmd; + + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 0; + dcmd->flags = MFI_FRAME_DIR_NONE; + dcmd->timeout = 0; + dcmd->data_xfer_len = 0; + dcmd->opcode = MR_DCMD_CTRL_SHUTDOWN; + + megasas_issue_blocked_cmd(instance, cmd); + + megasas_return_cmd(instance, cmd); + + return; +} + +/** + * megasas_detach_one - PCI hot"un"plug entry point + * @pdev: PCI device structure + */ +static void megasas_detach_one(struct pci_dev *pdev) +{ + int i; + struct Scsi_Host *host; + struct megasas_instance *instance; + + instance = pci_get_drvdata(pdev); + host = instance->host; + + scsi_remove_host(instance->host); + megasas_flush_cache(instance); + megasas_shutdown_controller(instance); + + /* + * Take the instance off the instance array. Note that we will not + * decrement the max_index. We let this array be sparse array + */ + for (i = 0; i < megasas_mgmt_info.max_index; i++) { + if (megasas_mgmt_info.instance[i] == instance) { + megasas_mgmt_info.count--; + megasas_mgmt_info.instance[i] = NULL; + + break; + } + } + + pci_set_drvdata(instance->pdev, NULL); + + megasas_disable_intr(instance->reg_set); + + free_irq(instance->pdev->irq, instance); + + megasas_release_mfi(instance); + + pci_free_consistent(pdev, sizeof(struct megasas_evt_detail), + instance->evt_detail, instance->evt_detail_h); + + pci_free_consistent(pdev, sizeof(u32), instance->producer, + instance->producer_h); + + pci_free_consistent(pdev, sizeof(u32), instance->consumer, + instance->consumer_h); + + scsi_host_put(host); + + pci_set_drvdata(pdev, NULL); + + pci_disable_device(pdev); + + return; +} + +/** + * megasas_shutdown - Shutdown entry point + * @device: Generic device structure + */ +static void megasas_shutdown(struct pci_dev *pdev) +{ + struct megasas_instance *instance = pci_get_drvdata(pdev); + megasas_flush_cache(instance); +} + +/** + * megasas_mgmt_open - char node "open" entry point + */ +static int megasas_mgmt_open(struct inode *inode, struct file *filep) +{ + /* + * Allow only those users with admin rights + */ + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + return 0; +} + +/** + * megasas_mgmt_release - char node "release" entry point + */ +static int megasas_mgmt_release(struct inode *inode, struct file *filep) +{ + filep->private_data = NULL; + fasync_helper(-1, filep, 0, &megasas_async_queue); + + return 0; +} + +/** + * megasas_mgmt_fasync - Async notifier registration from applications + * + * This function adds the calling process to a driver global queue. When an + * event occurs, SIGIO will be sent to all processes in this queue. + */ +static int megasas_mgmt_fasync(int fd, struct file *filep, int mode) +{ + int rc; + + down(&megasas_async_queue_mutex); + + rc = fasync_helper(fd, filep, mode, &megasas_async_queue); + + up(&megasas_async_queue_mutex); + + if (rc >= 0) { + /* For sanity check when we get ioctl */ + filep->private_data = filep; + return 0; + } + + printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc); + + return rc; +} + +/** + * megasas_mgmt_fw_ioctl - Issues management ioctls to FW + * @instance: Adapter soft state + * @argp: User's ioctl packet + */ +static int +megasas_mgmt_fw_ioctl(struct megasas_instance *instance, + struct megasas_iocpacket __user * user_ioc, + struct megasas_iocpacket *ioc) +{ + struct megasas_sge32 *kern_sge32; + struct megasas_cmd *cmd; + void *kbuff_arr[MAX_IOCTL_SGE]; + dma_addr_t buf_handle = 0; + int error = 0, i; + void *sense = NULL; + dma_addr_t sense_handle; + u32 *sense_ptr; + + memset(kbuff_arr, 0, sizeof(kbuff_arr)); + + if (ioc->sge_count > MAX_IOCTL_SGE) { + printk(KERN_DEBUG "megasas: SGE count [%d] > max limit [%d]\n", + ioc->sge_count, MAX_IOCTL_SGE); + return -EINVAL; + } + + cmd = megasas_get_cmd(instance); + if (!cmd) { + printk(KERN_DEBUG "megasas: Failed to get a cmd packet\n"); + return -ENOMEM; + } + + /* + * User's IOCTL packet has 2 frames (maximum). Copy those two + * frames into our cmd's frames. cmd->frame's context will get + * overwritten when we copy from user's frames. So set that value + * alone separately + */ + memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE); + cmd->frame->hdr.context = cmd->index; + + /* + * The management interface between applications and the fw uses + * MFI frames. E.g, RAID configuration changes, LD property changes + * etc are accomplishes through different kinds of MFI frames. The + * driver needs to care only about substituting user buffers with + * kernel buffers in SGLs. The location of SGL is embedded in the + * struct iocpacket itself. + */ + kern_sge32 = (struct megasas_sge32 *) + ((unsigned long)cmd->frame + ioc->sgl_off); + + /* + * For each user buffer, create a mirror buffer and copy in + */ + for (i = 0; i < ioc->sge_count; i++) { + kbuff_arr[i] = pci_alloc_consistent(instance->pdev, + ioc->sgl[i].iov_len, + &buf_handle); + if (!kbuff_arr[i]) { + printk(KERN_DEBUG "megasas: Failed to alloc " + "kernel SGL buffer for IOCTL \n"); + error = -ENOMEM; + goto out; + } + + /* + * We don't change the dma_coherent_mask, so + * pci_alloc_consistent only returns 32bit addresses + */ + kern_sge32[i].phys_addr = (u32) buf_handle; + kern_sge32[i].length = ioc->sgl[i].iov_len; + + /* + * We created a kernel buffer corresponding to the + * user buffer. Now copy in from the user buffer + */ + if (copy_from_user(kbuff_arr[i], ioc->sgl[i].iov_base, + (u32) (ioc->sgl[i].iov_len))) { + error = -EFAULT; + goto out; + } + } + + if (ioc->sense_len) { + sense = pci_alloc_consistent(instance->pdev, ioc->sense_len, + &sense_handle); + if (!sense) { + error = -ENOMEM; + goto out; + } + + sense_ptr = + (u32 *) ((unsigned long)cmd->frame + ioc->sense_off); + *sense_ptr = sense_handle; + } + + /* + * Set the sync_cmd flag so that the ISR knows not to complete this + * cmd to the SCSI mid-layer + */ + cmd->sync_cmd = 1; + megasas_issue_blocked_cmd(instance, cmd); + cmd->sync_cmd = 0; + + /* + * copy out the kernel buffers to user buffers + */ + for (i = 0; i < ioc->sge_count; i++) { + if (copy_to_user(ioc->sgl[i].iov_base, kbuff_arr[i], + ioc->sgl[i].iov_len)) { + error = -EFAULT; + goto out; + } + } + + /* + * copy out the sense + */ + if (ioc->sense_len) { + /* + * sense_ptr points to the location that has the user + * sense buffer address + */ + sense_ptr = (u32 *) ((unsigned long)ioc->frame.raw + + ioc->sense_off); + + if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)), + sense, ioc->sense_len)) { + error = -EFAULT; + goto out; + } + } + + /* + * copy the status codes returned by the fw + */ + if (copy_to_user(&user_ioc->frame.hdr.cmd_status, + &cmd->frame->hdr.cmd_status, sizeof(u8))) { + printk(KERN_DEBUG "megasas: Error copying out cmd_status\n"); + error = -EFAULT; + } + + out: + if (sense) { + pci_free_consistent(instance->pdev, ioc->sense_len, + sense, sense_handle); + } + + for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) { + pci_free_consistent(instance->pdev, + kern_sge32[i].length, + kbuff_arr[i], kern_sge32[i].phys_addr); + } + + megasas_return_cmd(instance, cmd); + return error; +} + +static struct megasas_instance *megasas_lookup_instance(u16 host_no) +{ + int i; + + for (i = 0; i < megasas_mgmt_info.max_index; i++) { + + if ((megasas_mgmt_info.instance[i]) && + (megasas_mgmt_info.instance[i]->host->host_no == host_no)) + return megasas_mgmt_info.instance[i]; + } + + return NULL; +} + +static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg) +{ + struct megasas_iocpacket __user *user_ioc = + (struct megasas_iocpacket __user *)arg; + struct megasas_iocpacket *ioc; + struct megasas_instance *instance; + int error; + + ioc = kmalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) + return -ENOMEM; + + if (copy_from_user(ioc, user_ioc, sizeof(*ioc))) { + error = -EFAULT; + goto out_kfree_ioc; + } + + instance = megasas_lookup_instance(ioc->host_no); + if (!instance) { + error = -ENODEV; + goto out_kfree_ioc; + } + + /* + * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds + */ + if (down_interruptible(&instance->ioctl_sem)) { + error = -ERESTARTSYS; + goto out_kfree_ioc; + } + error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc); + up(&instance->ioctl_sem); + + out_kfree_ioc: + kfree(ioc); + return error; +} + +static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg) +{ + struct megasas_instance *instance; + struct megasas_aen aen; + int error; + + if (file->private_data != file) { + printk(KERN_DEBUG "megasas: fasync_helper was not " + "called first\n"); + return -EINVAL; + } + + if (copy_from_user(&aen, (void __user *)arg, sizeof(aen))) + return -EFAULT; + + instance = megasas_lookup_instance(aen.host_no); + + if (!instance) + return -ENODEV; + + down(&instance->aen_mutex); + error = megasas_register_aen(instance, aen.seq_num, + aen.class_locale_word); + up(&instance->aen_mutex); + return error; +} + +/** + * megasas_mgmt_ioctl - char node ioctl entry point + */ +static long +megasas_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case MEGASAS_IOC_FIRMWARE: + return megasas_mgmt_ioctl_fw(file, arg); + + case MEGASAS_IOC_GET_AEN: + return megasas_mgmt_ioctl_aen(file, arg); + } + + return -ENOTTY; +} + +#ifdef CONFIG_COMPAT +static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg) +{ + struct compat_megasas_iocpacket __user *cioc = + (struct compat_megasas_iocpacket __user *)arg; + struct megasas_iocpacket __user *ioc = + compat_alloc_user_space(sizeof(struct megasas_iocpacket)); + int i; + int error = 0; + + clear_user(ioc, sizeof(*ioc)); + + if (copy_in_user(&ioc->host_no, &cioc->host_no, sizeof(u16)) || + copy_in_user(&ioc->sgl_off, &cioc->sgl_off, sizeof(u32)) || + copy_in_user(&ioc->sense_off, &cioc->sense_off, sizeof(u32)) || + copy_in_user(&ioc->sense_len, &cioc->sense_len, sizeof(u32)) || + copy_in_user(ioc->frame.raw, cioc->frame.raw, 128) || + copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32))) + return -EFAULT; + + for (i = 0; i < MAX_IOCTL_SGE; i++) { + compat_uptr_t ptr; + + if (get_user(ptr, &cioc->sgl[i].iov_base) || + put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) || + copy_in_user(&ioc->sgl[i].iov_len, + &cioc->sgl[i].iov_len, sizeof(compat_size_t))) + return -EFAULT; + } + + error = megasas_mgmt_ioctl_fw(file, (unsigned long)ioc); + + if (copy_in_user(&cioc->frame.hdr.cmd_status, + &ioc->frame.hdr.cmd_status, sizeof(u8))) { + printk(KERN_DEBUG "megasas: error copy_in_user cmd_status\n"); + return -EFAULT; + } + return error; +} + +static long +megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case MEGASAS_IOC_FIRMWARE:{ + return megasas_mgmt_compat_ioctl_fw(file, arg); + } + case MEGASAS_IOC_GET_AEN: + return megasas_mgmt_ioctl_aen(file, arg); + } + + return -ENOTTY; +} +#endif + +/* + * File operations structure for management interface + */ +static struct file_operations megasas_mgmt_fops = { + .owner = THIS_MODULE, + .open = megasas_mgmt_open, + .release = megasas_mgmt_release, + .fasync = megasas_mgmt_fasync, + .unlocked_ioctl = megasas_mgmt_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = megasas_mgmt_compat_ioctl, +#endif +}; + +/* + * PCI hotplug support registration structure + */ +static struct pci_driver megasas_pci_driver = { + + .name = "megaraid_sas", + .id_table = megasas_pci_table, + .probe = megasas_probe_one, + .remove = __devexit_p(megasas_detach_one), + .shutdown = megasas_shutdown, +}; + +/* + * Sysfs driver attributes + */ +static ssize_t megasas_sysfs_show_version(struct device_driver *dd, char *buf) +{ + return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n", + MEGASAS_VERSION); +} + +static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL); + +static ssize_t +megasas_sysfs_show_release_date(struct device_driver *dd, char *buf) +{ + return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n", + MEGASAS_RELDATE); +} + +static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date, + NULL); + +/** + * megasas_init - Driver load entry point + */ +static int __init megasas_init(void) +{ + int rval; + + /* + * Announce driver version and other information + */ + printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION, + MEGASAS_EXT_VERSION); + + memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info)); + + /* + * Register character device node + */ + rval = register_chrdev(0, "megaraid_sas_ioctl", &megasas_mgmt_fops); + + if (rval < 0) { + printk(KERN_DEBUG "megasas: failed to open device node\n"); + return rval; + } + + megasas_mgmt_majorno = rval; + + /* + * Register ourselves as PCI hotplug module + */ + rval = pci_module_init(&megasas_pci_driver); + + if (rval) { + printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n"); + unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl"); + } + + driver_create_file(&megasas_pci_driver.driver, &driver_attr_version); + driver_create_file(&megasas_pci_driver.driver, + &driver_attr_release_date); + + return rval; +} + +/** + * megasas_exit - Driver unload entry point + */ +static void __exit megasas_exit(void) +{ + driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version); + driver_remove_file(&megasas_pci_driver.driver, + &driver_attr_release_date); + + pci_unregister_driver(&megasas_pci_driver); + unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl"); +} + +module_init(megasas_init); +module_exit(megasas_exit); diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h new file mode 100644 index 00000000000..eaec9d53142 --- /dev/null +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -0,0 +1,1142 @@ +/* + * + * Linux MegaRAID driver for SAS based RAID controllers + * + * Copyright (c) 2003-2005 LSI Logic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * FILE : megaraid_sas.h + */ + +#ifndef LSI_MEGARAID_SAS_H +#define LSI_MEGARAID_SAS_H + +/** + * MegaRAID SAS Driver meta data + */ +#define MEGASAS_VERSION "00.00.02.00-rc4" +#define MEGASAS_RELDATE "Sep 16, 2005" +#define MEGASAS_EXT_VERSION "Fri Sep 16 12:37:08 EDT 2005" + +/* + * ===================================== + * MegaRAID SAS MFI firmware definitions + * ===================================== + */ + +/* + * MFI stands for MegaRAID SAS FW Interface. This is just a moniker for + * protocol between the software and firmware. Commands are issued using + * "message frames" + */ + +/** + * FW posts its state in upper 4 bits of outbound_msg_0 register + */ +#define MFI_STATE_MASK 0xF0000000 +#define MFI_STATE_UNDEFINED 0x00000000 +#define MFI_STATE_BB_INIT 0x10000000 +#define MFI_STATE_FW_INIT 0x40000000 +#define MFI_STATE_WAIT_HANDSHAKE 0x60000000 +#define MFI_STATE_FW_INIT_2 0x70000000 +#define MFI_STATE_DEVICE_SCAN 0x80000000 +#define MFI_STATE_FLUSH_CACHE 0xA0000000 +#define MFI_STATE_READY 0xB0000000 +#define MFI_STATE_OPERATIONAL 0xC0000000 +#define MFI_STATE_FAULT 0xF0000000 + +#define MEGAMFI_FRAME_SIZE 64 + +/** + * During FW init, clear pending cmds & reset state using inbound_msg_0 + * + * ABORT : Abort all pending cmds + * READY : Move from OPERATIONAL to READY state; discard queue info + * MFIMODE : Discard (possible) low MFA posted in 64-bit mode (??) + * CLR_HANDSHAKE: FW is waiting for HANDSHAKE from BIOS or Driver + */ +#define MFI_INIT_ABORT 0x00000000 +#define MFI_INIT_READY 0x00000002 +#define MFI_INIT_MFIMODE 0x00000004 +#define MFI_INIT_CLEAR_HANDSHAKE 0x00000008 +#define MFI_RESET_FLAGS MFI_INIT_READY|MFI_INIT_MFIMODE + +/** + * MFI frame flags + */ +#define MFI_FRAME_POST_IN_REPLY_QUEUE 0x0000 +#define MFI_FRAME_DONT_POST_IN_REPLY_QUEUE 0x0001 +#define MFI_FRAME_SGL32 0x0000 +#define MFI_FRAME_SGL64 0x0002 +#define MFI_FRAME_SENSE32 0x0000 +#define MFI_FRAME_SENSE64 0x0004 +#define MFI_FRAME_DIR_NONE 0x0000 +#define MFI_FRAME_DIR_WRITE 0x0008 +#define MFI_FRAME_DIR_READ 0x0010 +#define MFI_FRAME_DIR_BOTH 0x0018 + +/** + * Definition for cmd_status + */ +#define MFI_CMD_STATUS_POLL_MODE 0xFF + +/** + * MFI command opcodes + */ +#define MFI_CMD_INIT 0x00 +#define MFI_CMD_LD_READ 0x01 +#define MFI_CMD_LD_WRITE 0x02 +#define MFI_CMD_LD_SCSI_IO 0x03 +#define MFI_CMD_PD_SCSI_IO 0x04 +#define MFI_CMD_DCMD 0x05 +#define MFI_CMD_ABORT 0x06 +#define MFI_CMD_SMP 0x07 +#define MFI_CMD_STP 0x08 + +#define MR_DCMD_CTRL_GET_INFO 0x01010000 + +#define MR_DCMD_CTRL_CACHE_FLUSH 0x01101000 +#define MR_FLUSH_CTRL_CACHE 0x01 +#define MR_FLUSH_DISK_CACHE 0x02 + +#define MR_DCMD_CTRL_SHUTDOWN 0x01050000 +#define MR_ENABLE_DRIVE_SPINDOWN 0x01 + +#define MR_DCMD_CTRL_EVENT_GET_INFO 0x01040100 +#define MR_DCMD_CTRL_EVENT_GET 0x01040300 +#define MR_DCMD_CTRL_EVENT_WAIT 0x01040500 +#define MR_DCMD_LD_GET_PROPERTIES 0x03030000 + +#define MR_DCMD_CLUSTER 0x08000000 +#define MR_DCMD_CLUSTER_RESET_ALL 0x08010100 +#define MR_DCMD_CLUSTER_RESET_LD 0x08010200 + +/** + * MFI command completion codes + */ +enum MFI_STAT { + MFI_STAT_OK = 0x00, + MFI_STAT_INVALID_CMD = 0x01, + MFI_STAT_INVALID_DCMD = 0x02, + MFI_STAT_INVALID_PARAMETER = 0x03, + MFI_STAT_INVALID_SEQUENCE_NUMBER = 0x04, + MFI_STAT_ABORT_NOT_POSSIBLE = 0x05, + MFI_STAT_APP_HOST_CODE_NOT_FOUND = 0x06, + MFI_STAT_APP_IN_USE = 0x07, + MFI_STAT_APP_NOT_INITIALIZED = 0x08, + MFI_STAT_ARRAY_INDEX_INVALID = 0x09, + MFI_STAT_ARRAY_ROW_NOT_EMPTY = 0x0a, + MFI_STAT_CONFIG_RESOURCE_CONFLICT = 0x0b, + MFI_STAT_DEVICE_NOT_FOUND = 0x0c, + MFI_STAT_DRIVE_TOO_SMALL = 0x0d, + MFI_STAT_FLASH_ALLOC_FAIL = 0x0e, + MFI_STAT_FLASH_BUSY = 0x0f, + MFI_STAT_FLASH_ERROR = 0x10, + MFI_STAT_FLASH_IMAGE_BAD = 0x11, + MFI_STAT_FLASH_IMAGE_INCOMPLETE = 0x12, + MFI_STAT_FLASH_NOT_OPEN = 0x13, + MFI_STAT_FLASH_NOT_STARTED = 0x14, + MFI_STAT_FLUSH_FAILED = 0x15, + MFI_STAT_HOST_CODE_NOT_FOUNT = 0x16, + MFI_STAT_LD_CC_IN_PROGRESS = 0x17, + MFI_STAT_LD_INIT_IN_PROGRESS = 0x18, + MFI_STAT_LD_LBA_OUT_OF_RANGE = 0x19, + MFI_STAT_LD_MAX_CONFIGURED = 0x1a, + MFI_STAT_LD_NOT_OPTIMAL = 0x1b, + MFI_STAT_LD_RBLD_IN_PROGRESS = 0x1c, + MFI_STAT_LD_RECON_IN_PROGRESS = 0x1d, + MFI_STAT_LD_WRONG_RAID_LEVEL = 0x1e, + MFI_STAT_MAX_SPARES_EXCEEDED = 0x1f, + MFI_STAT_MEMORY_NOT_AVAILABLE = 0x20, + MFI_STAT_MFC_HW_ERROR = 0x21, + MFI_STAT_NO_HW_PRESENT = 0x22, + MFI_STAT_NOT_FOUND = 0x23, + MFI_STAT_NOT_IN_ENCL = 0x24, + MFI_STAT_PD_CLEAR_IN_PROGRESS = 0x25, + MFI_STAT_PD_TYPE_WRONG = 0x26, + MFI_STAT_PR_DISABLED = 0x27, + MFI_STAT_ROW_INDEX_INVALID = 0x28, + MFI_STAT_SAS_CONFIG_INVALID_ACTION = 0x29, + MFI_STAT_SAS_CONFIG_INVALID_DATA = 0x2a, + MFI_STAT_SAS_CONFIG_INVALID_PAGE = 0x2b, + MFI_STAT_SAS_CONFIG_INVALID_TYPE = 0x2c, + MFI_STAT_SCSI_DONE_WITH_ERROR = 0x2d, + MFI_STAT_SCSI_IO_FAILED = 0x2e, + MFI_STAT_SCSI_RESERVATION_CONFLICT = 0x2f, + MFI_STAT_SHUTDOWN_FAILED = 0x30, + MFI_STAT_TIME_NOT_SET = 0x31, + MFI_STAT_WRONG_STATE = 0x32, + MFI_STAT_LD_OFFLINE = 0x33, + MFI_STAT_PEER_NOTIFICATION_REJECTED = 0x34, + MFI_STAT_PEER_NOTIFICATION_FAILED = 0x35, + MFI_STAT_RESERVATION_IN_PROGRESS = 0x36, + MFI_STAT_I2C_ERRORS_DETECTED = 0x37, + MFI_STAT_PCI_ERRORS_DETECTED = 0x38, + + MFI_STAT_INVALID_STATUS = 0xFF +}; + +/* + * Number of mailbox bytes in DCMD message frame + */ +#define MFI_MBOX_SIZE 12 + +enum MR_EVT_CLASS { + + MR_EVT_CLASS_DEBUG = -2, + MR_EVT_CLASS_PROGRESS = -1, + MR_EVT_CLASS_INFO = 0, + MR_EVT_CLASS_WARNING = 1, + MR_EVT_CLASS_CRITICAL = 2, + MR_EVT_CLASS_FATAL = 3, + MR_EVT_CLASS_DEAD = 4, + +}; + +enum MR_EVT_LOCALE { + + MR_EVT_LOCALE_LD = 0x0001, + MR_EVT_LOCALE_PD = 0x0002, + MR_EVT_LOCALE_ENCL = 0x0004, + MR_EVT_LOCALE_BBU = 0x0008, + MR_EVT_LOCALE_SAS = 0x0010, + MR_EVT_LOCALE_CTRL = 0x0020, + MR_EVT_LOCALE_CONFIG = 0x0040, + MR_EVT_LOCALE_CLUSTER = 0x0080, + MR_EVT_LOCALE_ALL = 0xffff, + +}; + +enum MR_EVT_ARGS { + + MR_EVT_ARGS_NONE, + MR_EVT_ARGS_CDB_SENSE, + MR_EVT_ARGS_LD, + MR_EVT_ARGS_LD_COUNT, + MR_EVT_ARGS_LD_LBA, + MR_EVT_ARGS_LD_OWNER, + MR_EVT_ARGS_LD_LBA_PD_LBA, + MR_EVT_ARGS_LD_PROG, + MR_EVT_ARGS_LD_STATE, + MR_EVT_ARGS_LD_STRIP, + MR_EVT_ARGS_PD, + MR_EVT_ARGS_PD_ERR, + MR_EVT_ARGS_PD_LBA, + MR_EVT_ARGS_PD_LBA_LD, + MR_EVT_ARGS_PD_PROG, + MR_EVT_ARGS_PD_STATE, + MR_EVT_ARGS_PCI, + MR_EVT_ARGS_RATE, + MR_EVT_ARGS_STR, + MR_EVT_ARGS_TIME, + MR_EVT_ARGS_ECC, + +}; + +/* + * SAS controller properties + */ +struct megasas_ctrl_prop { + + u16 seq_num; + u16 pred_fail_poll_interval; + u16 intr_throttle_count; + u16 intr_throttle_timeouts; + u8 rebuild_rate; + u8 patrol_read_rate; + u8 bgi_rate; + u8 cc_rate; + u8 recon_rate; + u8 cache_flush_interval; + u8 spinup_drv_count; + u8 spinup_delay; + u8 cluster_enable; + u8 coercion_mode; + u8 alarm_enable; + u8 disable_auto_rebuild; + u8 disable_battery_warn; + u8 ecc_bucket_size; + u16 ecc_bucket_leak_rate; + u8 restore_hotspare_on_insertion; + u8 expose_encl_devices; + u8 reserved[38]; + +} __attribute__ ((packed)); + +/* + * SAS controller information + */ +struct megasas_ctrl_info { + + /* + * PCI device information + */ + struct { + + u16 vendor_id; + u16 device_id; + u16 sub_vendor_id; + u16 sub_device_id; + u8 reserved[24]; + + } __attribute__ ((packed)) pci; + + /* + * Host interface information + */ + struct { + + u8 PCIX:1; + u8 PCIE:1; + u8 iSCSI:1; + u8 SAS_3G:1; + u8 reserved_0:4; + u8 reserved_1[6]; + u8 port_count; + u64 port_addr[8]; + + } __attribute__ ((packed)) host_interface; + + /* + * Device (backend) interface information + */ + struct { + + u8 SPI:1; + u8 SAS_3G:1; + u8 SATA_1_5G:1; + u8 SATA_3G:1; + u8 reserved_0:4; + u8 reserved_1[6]; + u8 port_count; + u64 port_addr[8]; + + } __attribute__ ((packed)) device_interface; + + /* + * List of components residing in flash. All str are null terminated + */ + u32 image_check_word; + u32 image_component_count; + + struct { + + char name[8]; + char version[32]; + char build_date[16]; + char built_time[16]; + + } __attribute__ ((packed)) image_component[8]; + + /* + * List of flash components that have been flashed on the card, but + * are not in use, pending reset of the adapter. This list will be + * empty if a flash operation has not occurred. All stings are null + * terminated + */ + u32 pending_image_component_count; + + struct { + + char name[8]; + char version[32]; + char build_date[16]; + char build_time[16]; + + } __attribute__ ((packed)) pending_image_component[8]; + + u8 max_arms; + u8 max_spans; + u8 max_arrays; + u8 max_lds; + + char product_name[80]; + char serial_no[32]; + + /* + * Other physical/controller/operation information. Indicates the + * presence of the hardware + */ + struct { + + u32 bbu:1; + u32 alarm:1; + u32 nvram:1; + u32 uart:1; + u32 reserved:28; + + } __attribute__ ((packed)) hw_present; + + u32 current_fw_time; + + /* + * Maximum data transfer sizes + */ + u16 max_concurrent_cmds; + u16 max_sge_count; + u32 max_request_size; + + /* + * Logical and physical device counts + */ + u16 ld_present_count; + u16 ld_degraded_count; + u16 ld_offline_count; + + u16 pd_present_count; + u16 pd_disk_present_count; + u16 pd_disk_pred_failure_count; + u16 pd_disk_failed_count; + + /* + * Memory size information + */ + u16 nvram_size; + u16 memory_size; + u16 flash_size; + + /* + * Error counters + */ + u16 mem_correctable_error_count; + u16 mem_uncorrectable_error_count; + + /* + * Cluster information + */ + u8 cluster_permitted; + u8 cluster_active; + + /* + * Additional max data transfer sizes + */ + u16 max_strips_per_io; + + /* + * Controller capabilities structures + */ + struct { + + u32 raid_level_0:1; + u32 raid_level_1:1; + u32 raid_level_5:1; + u32 raid_level_1E:1; + u32 raid_level_6:1; + u32 reserved:27; + + } __attribute__ ((packed)) raid_levels; + + struct { + + u32 rbld_rate:1; + u32 cc_rate:1; + u32 bgi_rate:1; + u32 recon_rate:1; + u32 patrol_rate:1; + u32 alarm_control:1; + u32 cluster_supported:1; + u32 bbu:1; + u32 spanning_allowed:1; + u32 dedicated_hotspares:1; + u32 revertible_hotspares:1; + u32 foreign_config_import:1; + u32 self_diagnostic:1; + u32 mixed_redundancy_arr:1; + u32 global_hot_spares:1; + u32 reserved:17; + + } __attribute__ ((packed)) adapter_operations; + + struct { + + u32 read_policy:1; + u32 write_policy:1; + u32 io_policy:1; + u32 access_policy:1; + u32 disk_cache_policy:1; + u32 reserved:27; + + } __attribute__ ((packed)) ld_operations; + + struct { + + u8 min; + u8 max; + u8 reserved[2]; + + } __attribute__ ((packed)) stripe_sz_ops; + + struct { + + u32 force_online:1; + u32 force_offline:1; + u32 force_rebuild:1; + u32 reserved:29; + + } __attribute__ ((packed)) pd_operations; + + struct { + + u32 ctrl_supports_sas:1; + u32 ctrl_supports_sata:1; + u32 allow_mix_in_encl:1; + u32 allow_mix_in_ld:1; + u32 allow_sata_in_cluster:1; + u32 reserved:27; + + } __attribute__ ((packed)) pd_mix_support; + + /* + * Define ECC single-bit-error bucket information + */ + u8 ecc_bucket_count; + u8 reserved_2[11]; + + /* + * Include the controller properties (changeable items) + */ + struct megasas_ctrl_prop properties; + + /* + * Define FW pkg version (set in envt v'bles on OEM basis) + */ + char package_version[0x60]; + + u8 pad[0x800 - 0x6a0]; + +} __attribute__ ((packed)); + +/* + * =============================== + * MegaRAID SAS driver definitions + * =============================== + */ +#define MEGASAS_MAX_PD_CHANNELS 2 +#define MEGASAS_MAX_LD_CHANNELS 2 +#define MEGASAS_MAX_CHANNELS (MEGASAS_MAX_PD_CHANNELS + \ + MEGASAS_MAX_LD_CHANNELS) +#define MEGASAS_MAX_DEV_PER_CHANNEL 128 +#define MEGASAS_DEFAULT_INIT_ID -1 +#define MEGASAS_MAX_LUN 8 +#define MEGASAS_MAX_LD 64 + +/* + * When SCSI mid-layer calls driver's reset routine, driver waits for + * MEGASAS_RESET_WAIT_TIME seconds for all outstanding IO to complete. Note + * that the driver cannot _actually_ abort or reset pending commands. While + * it is waiting for the commands to complete, it prints a diagnostic message + * every MEGASAS_RESET_NOTICE_INTERVAL seconds + */ +#define MEGASAS_RESET_WAIT_TIME 180 +#define MEGASAS_RESET_NOTICE_INTERVAL 5 + +#define MEGASAS_IOCTL_CMD 0 + +/* + * FW reports the maximum of number of commands that it can accept (maximum + * commands that can be outstanding) at any time. The driver must report a + * lower number to the mid layer because it can issue a few internal commands + * itself (E.g, AEN, abort cmd, IOCTLs etc). The number of commands it needs + * is shown below + */ +#define MEGASAS_INT_CMDS 32 + +/* + * FW can accept both 32 and 64 bit SGLs. We want to allocate 32/64 bit + * SGLs based on the size of dma_addr_t + */ +#define IS_DMA64 (sizeof(dma_addr_t) == 8) + +#define MFI_OB_INTR_STATUS_MASK 0x00000002 +#define MFI_POLL_TIMEOUT_SECS 10 + +struct megasas_register_set { + + u32 reserved_0[4]; /*0000h */ + + u32 inbound_msg_0; /*0010h */ + u32 inbound_msg_1; /*0014h */ + u32 outbound_msg_0; /*0018h */ + u32 outbound_msg_1; /*001Ch */ + + u32 inbound_doorbell; /*0020h */ + u32 inbound_intr_status; /*0024h */ + u32 inbound_intr_mask; /*0028h */ + + u32 outbound_doorbell; /*002Ch */ + u32 outbound_intr_status; /*0030h */ + u32 outbound_intr_mask; /*0034h */ + + u32 reserved_1[2]; /*0038h */ + + u32 inbound_queue_port; /*0040h */ + u32 outbound_queue_port; /*0044h */ + + u32 reserved_2; /*004Ch */ + + u32 index_registers[1004]; /*0050h */ + +} __attribute__ ((packed)); + +struct megasas_sge32 { + + u32 phys_addr; + u32 length; + +} __attribute__ ((packed)); + +struct megasas_sge64 { + + u64 phys_addr; + u32 length; + +} __attribute__ ((packed)); + +union megasas_sgl { + + struct megasas_sge32 sge32[1]; + struct megasas_sge64 sge64[1]; + +} __attribute__ ((packed)); + +struct megasas_header { + + u8 cmd; /*00h */ + u8 sense_len; /*01h */ + u8 cmd_status; /*02h */ + u8 scsi_status; /*03h */ + + u8 target_id; /*04h */ + u8 lun; /*05h */ + u8 cdb_len; /*06h */ + u8 sge_count; /*07h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 timeout; /*12h */ + u32 data_xferlen; /*14h */ + +} __attribute__ ((packed)); + +union megasas_sgl_frame { + + struct megasas_sge32 sge32[8]; + struct megasas_sge64 sge64[5]; + +} __attribute__ ((packed)); + +struct megasas_init_frame { + + u8 cmd; /*00h */ + u8 reserved_0; /*01h */ + u8 cmd_status; /*02h */ + + u8 reserved_1; /*03h */ + u32 reserved_2; /*04h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 reserved_3; /*12h */ + u32 data_xfer_len; /*14h */ + + u32 queue_info_new_phys_addr_lo; /*18h */ + u32 queue_info_new_phys_addr_hi; /*1Ch */ + u32 queue_info_old_phys_addr_lo; /*20h */ + u32 queue_info_old_phys_addr_hi; /*24h */ + + u32 reserved_4[6]; /*28h */ + +} __attribute__ ((packed)); + +struct megasas_init_queue_info { + + u32 init_flags; /*00h */ + u32 reply_queue_entries; /*04h */ + + u32 reply_queue_start_phys_addr_lo; /*08h */ + u32 reply_queue_start_phys_addr_hi; /*0Ch */ + u32 producer_index_phys_addr_lo; /*10h */ + u32 producer_index_phys_addr_hi; /*14h */ + u32 consumer_index_phys_addr_lo; /*18h */ + u32 consumer_index_phys_addr_hi; /*1Ch */ + +} __attribute__ ((packed)); + +struct megasas_io_frame { + + u8 cmd; /*00h */ + u8 sense_len; /*01h */ + u8 cmd_status; /*02h */ + u8 scsi_status; /*03h */ + + u8 target_id; /*04h */ + u8 access_byte; /*05h */ + u8 reserved_0; /*06h */ + u8 sge_count; /*07h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 timeout; /*12h */ + u32 lba_count; /*14h */ + + u32 sense_buf_phys_addr_lo; /*18h */ + u32 sense_buf_phys_addr_hi; /*1Ch */ + + u32 start_lba_lo; /*20h */ + u32 start_lba_hi; /*24h */ + + union megasas_sgl sgl; /*28h */ + +} __attribute__ ((packed)); + +struct megasas_pthru_frame { + + u8 cmd; /*00h */ + u8 sense_len; /*01h */ + u8 cmd_status; /*02h */ + u8 scsi_status; /*03h */ + + u8 target_id; /*04h */ + u8 lun; /*05h */ + u8 cdb_len; /*06h */ + u8 sge_count; /*07h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 timeout; /*12h */ + u32 data_xfer_len; /*14h */ + + u32 sense_buf_phys_addr_lo; /*18h */ + u32 sense_buf_phys_addr_hi; /*1Ch */ + + u8 cdb[16]; /*20h */ + union megasas_sgl sgl; /*30h */ + +} __attribute__ ((packed)); + +struct megasas_dcmd_frame { + + u8 cmd; /*00h */ + u8 reserved_0; /*01h */ + u8 cmd_status; /*02h */ + u8 reserved_1[4]; /*03h */ + u8 sge_count; /*07h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 timeout; /*12h */ + + u32 data_xfer_len; /*14h */ + u32 opcode; /*18h */ + + union { /*1Ch */ + u8 b[12]; + u16 s[6]; + u32 w[3]; + } mbox; + + union megasas_sgl sgl; /*28h */ + +} __attribute__ ((packed)); + +struct megasas_abort_frame { + + u8 cmd; /*00h */ + u8 reserved_0; /*01h */ + u8 cmd_status; /*02h */ + + u8 reserved_1; /*03h */ + u32 reserved_2; /*04h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 reserved_3; /*12h */ + u32 reserved_4; /*14h */ + + u32 abort_context; /*18h */ + u32 pad_1; /*1Ch */ + + u32 abort_mfi_phys_addr_lo; /*20h */ + u32 abort_mfi_phys_addr_hi; /*24h */ + + u32 reserved_5[6]; /*28h */ + +} __attribute__ ((packed)); + +struct megasas_smp_frame { + + u8 cmd; /*00h */ + u8 reserved_1; /*01h */ + u8 cmd_status; /*02h */ + u8 connection_status; /*03h */ + + u8 reserved_2[3]; /*04h */ + u8 sge_count; /*07h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 timeout; /*12h */ + + u32 data_xfer_len; /*14h */ + u64 sas_addr; /*18h */ + + union { + struct megasas_sge32 sge32[2]; /* [0]: resp [1]: req */ + struct megasas_sge64 sge64[2]; /* [0]: resp [1]: req */ + } sgl; + +} __attribute__ ((packed)); + +struct megasas_stp_frame { + + u8 cmd; /*00h */ + u8 reserved_1; /*01h */ + u8 cmd_status; /*02h */ + u8 reserved_2; /*03h */ + + u8 target_id; /*04h */ + u8 reserved_3[2]; /*05h */ + u8 sge_count; /*07h */ + + u32 context; /*08h */ + u32 pad_0; /*0Ch */ + + u16 flags; /*10h */ + u16 timeout; /*12h */ + + u32 data_xfer_len; /*14h */ + + u16 fis[10]; /*18h */ + u32 stp_flags; + + union { + struct megasas_sge32 sge32[2]; /* [0]: resp [1]: data */ + struct megasas_sge64 sge64[2]; /* [0]: resp [1]: data */ + } sgl; + +} __attribute__ ((packed)); + +union megasas_frame { + + struct megasas_header hdr; + struct megasas_init_frame init; + struct megasas_io_frame io; + struct megasas_pthru_frame pthru; + struct megasas_dcmd_frame dcmd; + struct megasas_abort_frame abort; + struct megasas_smp_frame smp; + struct megasas_stp_frame stp; + + u8 raw_bytes[64]; +}; + +struct megasas_cmd; + +union megasas_evt_class_locale { + + struct { + u16 locale; + u8 reserved; + s8 class; + } __attribute__ ((packed)) members; + + u32 word; + +} __attribute__ ((packed)); + +struct megasas_evt_log_info { + u32 newest_seq_num; + u32 oldest_seq_num; + u32 clear_seq_num; + u32 shutdown_seq_num; + u32 boot_seq_num; + +} __attribute__ ((packed)); + +struct megasas_progress { + + u16 progress; + u16 elapsed_seconds; + +} __attribute__ ((packed)); + +struct megasas_evtarg_ld { + + u16 target_id; + u8 ld_index; + u8 reserved; + +} __attribute__ ((packed)); + +struct megasas_evtarg_pd { + u16 device_id; + u8 encl_index; + u8 slot_number; + +} __attribute__ ((packed)); + +struct megasas_evt_detail { + + u32 seq_num; + u32 time_stamp; + u32 code; + union megasas_evt_class_locale cl; + u8 arg_type; + u8 reserved1[15]; + + union { + struct { + struct megasas_evtarg_pd pd; + u8 cdb_length; + u8 sense_length; + u8 reserved[2]; + u8 cdb[16]; + u8 sense[64]; + } __attribute__ ((packed)) cdbSense; + + struct megasas_evtarg_ld ld; + + struct { + struct megasas_evtarg_ld ld; + u64 count; + } __attribute__ ((packed)) ld_count; + + struct { + u64 lba; + struct megasas_evtarg_ld ld; + } __attribute__ ((packed)) ld_lba; + + struct { + struct megasas_evtarg_ld ld; + u32 prevOwner; + u32 newOwner; + } __attribute__ ((packed)) ld_owner; + + struct { + u64 ld_lba; + u64 pd_lba; + struct megasas_evtarg_ld ld; + struct megasas_evtarg_pd pd; + } __attribute__ ((packed)) ld_lba_pd_lba; + + struct { + struct megasas_evtarg_ld ld; + struct megasas_progress prog; + } __attribute__ ((packed)) ld_prog; + + struct { + struct megasas_evtarg_ld ld; + u32 prev_state; + u32 new_state; + } __attribute__ ((packed)) ld_state; + + struct { + u64 strip; + struct megasas_evtarg_ld ld; + } __attribute__ ((packed)) ld_strip; + + struct megasas_evtarg_pd pd; + + struct { + struct megasas_evtarg_pd pd; + u32 err; + } __attribute__ ((packed)) pd_err; + + struct { + u64 lba; + struct megasas_evtarg_pd pd; + } __attribute__ ((packed)) pd_lba; + + struct { + u64 lba; + struct megasas_evtarg_pd pd; + struct megasas_evtarg_ld ld; + } __attribute__ ((packed)) pd_lba_ld; + + struct { + struct megasas_evtarg_pd pd; + struct megasas_progress prog; + } __attribute__ ((packed)) pd_prog; + + struct { + struct megasas_evtarg_pd pd; + u32 prevState; + u32 newState; + } __attribute__ ((packed)) pd_state; + + struct { + u16 vendorId; + u16 deviceId; + u16 subVendorId; + u16 subDeviceId; + } __attribute__ ((packed)) pci; + + u32 rate; + char str[96]; + + struct { + u32 rtc; + u32 elapsedSeconds; + } __attribute__ ((packed)) time; + + struct { + u32 ecar; + u32 elog; + char str[64]; + } __attribute__ ((packed)) ecc; + + u8 b[96]; + u16 s[48]; + u32 w[24]; + u64 d[12]; + } args; + + char description[128]; + +} __attribute__ ((packed)); + +struct megasas_instance { + + u32 *producer; + dma_addr_t producer_h; + u32 *consumer; + dma_addr_t consumer_h; + + u32 *reply_queue; + dma_addr_t reply_queue_h; + + unsigned long base_addr; + struct megasas_register_set __iomem *reg_set; + + s8 init_id; + u8 reserved[3]; + + u16 max_num_sge; + u16 max_fw_cmds; + u32 max_sectors_per_req; + + struct megasas_cmd **cmd_list; + struct list_head cmd_pool; + spinlock_t cmd_pool_lock; + struct dma_pool *frame_dma_pool; + struct dma_pool *sense_dma_pool; + + struct megasas_evt_detail *evt_detail; + dma_addr_t evt_detail_h; + struct megasas_cmd *aen_cmd; + struct semaphore aen_mutex; + struct semaphore ioctl_sem; + + struct Scsi_Host *host; + + wait_queue_head_t int_cmd_wait_q; + wait_queue_head_t abort_cmd_wait_q; + + struct pci_dev *pdev; + u32 unique_id; + + u32 fw_outstanding; + u32 hw_crit_error; + spinlock_t instance_lock; +}; + +#define MEGASAS_IS_LOGICAL(scp) \ + (scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1 + +#define MEGASAS_DEV_INDEX(inst, scp) \ + ((scp->device->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL) + \ + scp->device->id + +struct megasas_cmd { + + union megasas_frame *frame; + dma_addr_t frame_phys_addr; + u8 *sense; + dma_addr_t sense_phys_addr; + + u32 index; + u8 sync_cmd; + u8 cmd_status; + u16 abort_aen; + + struct list_head list; + struct scsi_cmnd *scmd; + struct megasas_instance *instance; + u32 frame_count; +}; + +#define MAX_MGMT_ADAPTERS 1024 +#define MAX_IOCTL_SGE 16 + +struct megasas_iocpacket { + + u16 host_no; + u16 __pad1; + u32 sgl_off; + u32 sge_count; + u32 sense_off; + u32 sense_len; + union { + u8 raw[128]; + struct megasas_header hdr; + } frame; + + struct iovec sgl[MAX_IOCTL_SGE]; + +} __attribute__ ((packed)); + +struct megasas_aen { + u16 host_no; + u16 __pad1; + u32 seq_num; + u32 class_locale_word; +} __attribute__ ((packed)); + +#ifdef CONFIG_COMPAT +struct compat_megasas_iocpacket { + u16 host_no; + u16 __pad1; + u32 sgl_off; + u32 sge_count; + u32 sense_off; + u32 sense_len; + union { + u8 raw[128]; + struct megasas_header hdr; + } frame; + struct compat_iovec sgl[MAX_IOCTL_SGE]; +} __attribute__ ((packed)); + +#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct compat_megasas_iocpacket) +#else +#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct megasas_iocpacket) +#endif + +#define MEGASAS_IOC_GET_AEN _IOW('M', 3, struct megasas_aen) + +struct megasas_mgmt_info { + + u16 count; + struct megasas_instance *instance[MAX_MGMT_ADAPTERS]; + int max_index; +}; + +#endif /*LSI_MEGARAID_SAS_H */ diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c index bdc3bc74bbe..1eba9882863 100644 --- a/drivers/scsi/qla2xxx/qla_rscn.c +++ b/drivers/scsi/qla2xxx/qla_rscn.c @@ -330,6 +330,8 @@ qla2x00_update_login_fcport(scsi_qla_host_t *ha, struct mbx_entry *mbxstat, fcport->flags &= ~FCF_FAILOVER_NEEDED; fcport->iodesc_idx_sent = IODESC_INVALID_INDEX; atomic_set(&fcport->state, FCS_ONLINE); + if (fcport->rport) + fc_remote_port_unblock(fcport->rport); } diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index fcf9f6cbb14..327c5d7e5bd 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -587,6 +587,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result, if (sdev->scsi_level >= 2 || (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1)) sdev->scsi_level++; + sdev->sdev_target->scsi_level = sdev->scsi_level; return 0; } @@ -771,6 +772,15 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) return SCSI_SCAN_LUN_PRESENT; } +static inline void scsi_destroy_sdev(struct scsi_device *sdev) +{ + if (sdev->host->hostt->slave_destroy) + sdev->host->hostt->slave_destroy(sdev); + transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_gendev); +} + + /** * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it * @starget: pointer to target device structure @@ -803,9 +813,9 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * The rescan flag is used as an optimization, the first scan of a * host adapter calls into here with rescan == 0. */ - if (rescan) { - sdev = scsi_device_lookup_by_target(starget, lun); - if (sdev) { + sdev = scsi_device_lookup_by_target(starget, lun); + if (sdev) { + if (rescan || sdev->sdev_state != SDEV_CREATED) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: device exists on %s\n", sdev->sdev_gendev.bus_id)); @@ -820,9 +830,9 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, sdev->model); return SCSI_SCAN_LUN_PRESENT; } - } - - sdev = scsi_alloc_sdev(starget, lun, hostdata); + scsi_device_put(sdev); + } else + sdev = scsi_alloc_sdev(starget, lun, hostdata); if (!sdev) goto out; @@ -877,12 +887,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, res = SCSI_SCAN_NO_RESPONSE; } } - } else { - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_gendev); - } + } else + scsi_destroy_sdev(sdev); out: return res; } @@ -1054,7 +1060,7 @@ EXPORT_SYMBOL(int_to_scsilun); * 0: scan completed (or no memory, so further scanning is futile) * 1: no report lun scan, or not configured **/ -static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, +static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, int rescan) { char devname[64]; @@ -1067,7 +1073,8 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, struct scsi_lun *lunp, *lun_data; u8 *data; struct scsi_sense_hdr sshdr; - struct scsi_target *starget = scsi_target(sdev); + struct scsi_device *sdev; + struct Scsi_Host *shost = dev_to_shost(&starget->dev); /* * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set. @@ -1075,15 +1082,23 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, * support more than 8 LUNs. */ if ((bflags & BLIST_NOREPORTLUN) || - sdev->scsi_level < SCSI_2 || - (sdev->scsi_level < SCSI_3 && - (!(bflags & BLIST_REPORTLUN2) || sdev->host->max_lun <= 8)) ) + starget->scsi_level < SCSI_2 || + (starget->scsi_level < SCSI_3 && + (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) ) return 1; if (bflags & BLIST_NOLUN) return 0; + if (!(sdev = scsi_device_lookup_by_target(starget, 0))) { + sdev = scsi_alloc_sdev(starget, 0, NULL); + if (!sdev) + return 0; + if (scsi_device_get(sdev)) + return 0; + } + sprintf(devname, "host %d channel %d id %d", - sdev->host->host_no, sdev->channel, sdev->id); + shost->host_no, sdev->channel, sdev->id); /* * Allocate enough to hold the header (the same size as one scsi_lun) @@ -1098,8 +1113,10 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun); lun_data = kmalloc(length, GFP_ATOMIC | (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0)); - if (!lun_data) + if (!lun_data) { + printk(ALLOC_FAILURE_MSG, __FUNCTION__); goto out; + } scsi_cmd[0] = REPORT_LUNS; @@ -1201,10 +1218,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, for (i = 0; i < sizeof(struct scsi_lun); i++) printk("%02x", data[i]); printk(" has a LUN larger than currently supported.\n"); - } else if (lun == 0) { - /* - * LUN 0 has already been scanned. - */ } else if (lun > sdev->host->max_lun) { printk(KERN_WARNING "scsi: %s lun%d has a LUN larger" " than allowed by the host adapter\n", @@ -1227,13 +1240,13 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, } kfree(lun_data); - return 0; - out: - /* - * We are out of memory, don't try scanning any further. - */ - printk(ALLOC_FAILURE_MSG, __FUNCTION__); + scsi_device_put(sdev); + if (sdev->sdev_state == SDEV_CREATED) + /* + * the sdev we used didn't appear in the report luns scan + */ + scsi_destroy_sdev(sdev); return 0; } @@ -1299,7 +1312,6 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel, struct Scsi_Host *shost = dev_to_shost(parent); int bflags = 0; int res; - struct scsi_device *sdev = NULL; struct scsi_target *starget; if (shost->this_id == id) @@ -1325,27 +1337,16 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel, * Scan LUN 0, if there is some response, scan further. Ideally, we * would not configure LUN 0 until all LUNs are scanned. */ - res = scsi_probe_and_add_lun(starget, 0, &bflags, &sdev, rescan, NULL); - if (res == SCSI_SCAN_LUN_PRESENT) { - if (scsi_report_lun_scan(sdev, bflags, rescan) != 0) + res = scsi_probe_and_add_lun(starget, 0, &bflags, NULL, rescan, NULL); + if (res == SCSI_SCAN_LUN_PRESENT || res == SCSI_SCAN_TARGET_PRESENT) { + if (scsi_report_lun_scan(starget, bflags, rescan) != 0) /* * The REPORT LUN did not scan the target, * do a sequential scan. */ scsi_sequential_lun_scan(starget, bflags, - res, sdev->scsi_level, rescan); - } else if (res == SCSI_SCAN_TARGET_PRESENT) { - /* - * There's a target here, but lun 0 is offline so we - * can't use the report_lun scan. Fall back to a - * sequential lun scan with a bflags of SPARSELUN and - * a default scsi level of SCSI_2 - */ - scsi_sequential_lun_scan(starget, BLIST_SPARSELUN, - SCSI_SCAN_TARGET_PRESENT, SCSI_2, rescan); + res, starget->scsi_level, rescan); } - if (sdev) - scsi_device_put(sdev); out_reap: /* now determine if the target has any children at all @@ -1542,10 +1543,7 @@ void scsi_free_host_dev(struct scsi_device *sdev) { BUG_ON(sdev->id != sdev->host->this_id); - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_gendev); + scsi_destroy_sdev(sdev); } EXPORT_SYMBOL(scsi_free_host_dev); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index ff724bbe661..1d145d2f9a3 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -628,17 +628,16 @@ sas_rphy_delete(struct sas_rphy *rphy) struct Scsi_Host *shost = dev_to_shost(parent->dev.parent); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); - transport_destroy_device(&rphy->dev); + scsi_remove_target(dev); - scsi_remove_target(&rphy->dev); + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); spin_lock(&sas_host->lock); list_del(&rphy->list); spin_unlock(&sas_host->lock); - transport_remove_device(dev); - device_del(dev); - transport_destroy_device(dev); put_device(&parent->dev); } EXPORT_SYMBOL(sas_rphy_delete); diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 4d09a6e4dd2..ad94367df43 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2849,8 +2849,7 @@ sg_proc_init(void) struct proc_dir_entry *pdep; struct sg_proc_leaf * leaf; - sg_proc_sgp = create_proc_entry(sg_proc_sg_dirname, - S_IFDIR | S_IRUGO | S_IXUGO, NULL); + sg_proc_sgp = proc_mkdir(sg_proc_sg_dirname, NULL); if (!sg_proc_sgp) return 1; for (k = 0; k < num_leaves; ++k) { diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 4c985e6b378..53e0323d4b8 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -383,11 +383,11 @@ static int imx_startup(struct uart_port *port) */ retval = request_irq(sport->rxirq, imx_rxint, 0, DRIVER_NAME, sport); - if (retval) goto error_out2; + if (retval) goto error_out1; retval = request_irq(sport->txirq, imx_txint, 0, "imx-uart", sport); - if (retval) goto error_out1; + if (retval) goto error_out2; /* * Finally, clear and enable interrupts @@ -406,10 +406,9 @@ static int imx_startup(struct uart_port *port) return 0; -error_out1: - free_irq(sport->rxirq, sport); error_out2: - free_irq(sport->txirq, sport); + free_irq(sport->rxirq, sport); +error_out1: return retval; } @@ -860,7 +859,7 @@ imx_console_setup(struct console *co, char *options) return uart_set_options(&sport->port, co, baud, parity, bits, flow); } -extern struct uart_driver imx_reg; +static struct uart_driver imx_reg; static struct console imx_console = { .name = "ttySMX", .write = imx_console_write, diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 0c5c96a582b..f88fdd48068 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -973,18 +973,6 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) this_ir &= ~this_mir; } } - if (this_ir) { - printk(KERN_ERR - "unknown IOC4 %s interrupt 0x%x, sio_ir = 0x%x," - " sio_ies = 0x%x, other_ir = 0x%x :" - "other_ies = 0x%x\n", - (intr_type == IOC4_SIO_INTR_TYPE) ? "sio" : - "other", this_ir, - readl(&soft->is_ioc4_misc_addr->sio_ir.raw), - readl(&soft->is_ioc4_misc_addr->sio_ies.raw), - readl(&soft->is_ioc4_misc_addr->other_ir.raw), - readl(&soft->is_ioc4_misc_addr->other_ies.raw)); - } } #ifdef DEBUG_INTERRUPTS { diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index c361c6fb080..eff2158024c 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -82,8 +82,6 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> -#include <asm/mach-types.h> - /* structures */ struct s3c24xx_uart_info { @@ -753,8 +751,8 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, { struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_clksrc *clksrc; - struct clk *clk; + struct s3c24xx_uart_clksrc *clksrc = NULL; + struct clk *clk = NULL; unsigned long flags; unsigned int baud, quot; unsigned int ulcon; @@ -1237,6 +1235,7 @@ static int s3c2400_serial_probe(struct device *dev) static struct device_driver s3c2400_serial_drv = { .name = "s3c2400-uart", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2400_serial_probe, .remove = s3c24xx_serial_remove, @@ -1340,6 +1339,7 @@ static int s3c2410_serial_probe(struct device *dev) static struct device_driver s3c2410_serial_drv = { .name = "s3c2410-uart", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2410_serial_probe, .remove = s3c24xx_serial_remove, @@ -1501,6 +1501,7 @@ static int s3c2440_serial_probe(struct device *dev) static struct device_driver s3c2440_serial_drv = { .name = "s3c2440-uart", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = s3c2440_serial_probe, .remove = s3c24xx_serial_remove, diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index e971156daa6..ba9381fd3f2 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -274,7 +274,6 @@ static void transmit_chars(struct uart_sunsab_port *up, if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { up->interrupt_mask1 |= SAB82532_IMR1_XPR; writeb(up->interrupt_mask1, &up->regs->w.imr1); - uart_write_wakeup(&up->port); return; } diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 5959e6755a8..656c0e8d160 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -518,11 +518,7 @@ static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) quot = up->port.uartclk / (16 * new_baud); - spin_unlock(&up->port.lock); - sunsu_change_speed(&up->port, up->cflag, 0, quot); - - spin_lock(&up->port.lock); } static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *regs, int is_break) diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index d75445738c8..7653d6cf05a 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -517,10 +517,9 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, if (up->port.info == NULL) goto ack_tx_int; xmit = &up->port.info->xmit; - if (uart_circ_empty(xmit)) { - uart_write_wakeup(&up->port); + if (uart_circ_empty(xmit)) goto ack_tx_int; - } + if (uart_tx_stopped(&up->port)) goto ack_tx_int; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b4265aa7d45..487ff672b10 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -30,6 +30,8 @@ * Revision history * 22.12.1999 0.1 Initial release (split from proc_usb.c) * 04.01.2000 0.2 Turned into its own filesystem + * 30.09.2005 0.3 Fix user-triggerable oops in async URB delivery + * (CAN-2005-3055) */ /*****************************************************************************/ @@ -58,7 +60,8 @@ static struct class *usb_device_class; struct async { struct list_head asynclist; struct dev_state *ps; - struct task_struct *task; + pid_t pid; + uid_t uid, euid; unsigned int signr; unsigned int ifnum; void __user *userbuffer; @@ -290,7 +293,8 @@ static void async_completed(struct urb *urb, struct pt_regs *regs) sinfo.si_errno = as->urb->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; - send_sig_info(as->signr, &sinfo, as->task); + kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid, + as->euid); } wake_up(&ps->wait); } @@ -526,7 +530,9 @@ static int usbdev_open(struct inode *inode, struct file *file) INIT_LIST_HEAD(&ps->async_completed); init_waitqueue_head(&ps->wait); ps->discsignr = 0; - ps->disctask = current; + ps->disc_pid = current->pid; + ps->disc_uid = current->uid; + ps->disc_euid = current->euid; ps->disccontext = NULL; ps->ifclaimed = 0; wmb(); @@ -988,7 +994,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, as->userbuffer = NULL; as->signr = uurb->signr; as->ifnum = ifnum; - as->task = current; + as->pid = current->pid; + as->uid = current->uid; + as->euid = current->euid; if (!(uurb->endpoint & USB_DIR_IN)) { if (copy_from_user(as->urb->transfer_buffer, uurb->buffer, as->urb->transfer_buffer_length)) { free_async(as); diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index cbb451d227d..6385d1a99b6 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -242,7 +242,6 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) case HC_STATE_SUSPENDED: /* no DMA or IRQs except when HC is active */ if (dev->current_state == PCI_D0) { - free_irq (hcd->irq, hcd); pci_save_state (dev); pci_disable_device (dev); } @@ -374,14 +373,6 @@ int usb_hcd_pci_resume (struct pci_dev *dev) hcd->state = HC_STATE_RESUMING; hcd->saw_irq = 0; - retval = request_irq (dev->irq, usb_hcd_irq, SA_SHIRQ, - hcd->irq_descr, hcd); - if (retval < 0) { - dev_err (hcd->self.controller, - "can't restore IRQ after resume!\n"); - usb_hc_died (hcd); - return retval; - } retval = hcd->driver->resume (hcd); if (!HC_IS_RUNNING (hcd->state)) { diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 640f41e4702..d07bba01995 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -713,7 +713,7 @@ void usbfs_remove_device(struct usb_device *dev) sinfo.si_errno = EPIPE; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = ds->disccontext; - send_sig_info(ds->discsignr, &sinfo, ds->disctask); + kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid); } } usbfs_update_special(); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 83d48c8133a..e6504f3370a 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -52,7 +52,8 @@ struct dev_state { struct list_head async_completed; wait_queue_head_t wait; /* wake up if a request completed */ unsigned int discsignr; - struct task_struct *disctask; + pid_t disc_pid; + uid_t disc_uid, disc_euid; void __user *disccontext; unsigned long ifclaimed; }; diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 817620d7384..859aca7be75 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -17,8 +17,6 @@ */ #include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/arch/hardware.h> extern int usb_disabled(void); diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 5cde76faab9..d8f3ba7ad52 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -18,7 +18,6 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <asm/arch/hardware.h> #include <asm/arch/mux.h> #include <asm/arch/irqs.h> #include <asm/arch/gpio.h> diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 3d9bcf78a9a..da7d5478f74 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -20,7 +20,6 @@ */ #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/hardware/clock.h> #include <asm/arch/usb-control.h> diff --git a/drivers/usb/media/vicam.c b/drivers/usb/media/vicam.c index 4a5857c53f1..0bc0b1247a6 100644 --- a/drivers/usb/media/vicam.c +++ b/drivers/usb/media/vicam.c @@ -1148,7 +1148,7 @@ vicam_write_proc_gain(struct file *file, const char *buffer, static void vicam_create_proc_root(void) { - vicam_proc_root = create_proc_entry("video/vicam", S_IFDIR, 0); + vicam_proc_root = proc_mkdir("video/vicam", NULL); if (vicam_proc_root) vicam_proc_root->owner = THIS_MODULE; @@ -1181,7 +1181,7 @@ vicam_create_proc_entry(struct vicam_camera *cam) sprintf(name, "video%d", cam->vdev.minor); - cam->proc_dir = create_proc_entry(name, S_IFDIR, vicam_proc_root); + cam->proc_dir = proc_mkdir(name, vicam_proc_root); if ( !cam->proc_dir ) return; // FIXME: We should probably return an error here diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 773ae11b4a1..1cd942abb58 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -768,6 +768,7 @@ config FB_INTEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports the on-board graphics built in to the Intel 830M/845G/852GM/855GM/865G chipsets. diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 046b4786026..8a24a66d9ba 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -475,7 +475,7 @@ static int __devinit radeon_probe_pll_params(struct radeonfb_info *rinfo) */ /* Flush PCI buffers ? */ - tmp = INREG(DEVICE_ID); + tmp = INREG16(DEVICE_ID); local_irq_disable(); diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 59a1b6f8506..097d668c4fe 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -62,9 +62,9 @@ static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo) OUTPLL(pllSCLK_CNTL, tmp); return; } - /* RV350 (M10) */ + /* RV350 (M10/M11) */ if (rinfo->family == CHIP_FAMILY_RV350) { - /* for RV350/M10, no delays are required. */ + /* for RV350/M10/M11, no delays are required. */ tmp = INPLL(pllSCLK_CNTL2); tmp |= (SCLK_CNTL2__R300_FORCE_TCL | SCLK_CNTL2__R300_FORCE_GA | @@ -248,7 +248,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) return; } - /* M10 */ + /* M10/M11 */ if (rinfo->family == CHIP_FAMILY_RV350) { tmp = INPLL(pllSCLK_CNTL2); tmp &= ~(SCLK_CNTL2__R300_FORCE_TCL | @@ -1155,7 +1155,7 @@ static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo) OUTREG( CRTC_GEN_CNTL, (crtcGenCntl | CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B) ); OUTREG( CRTC2_GEN_CNTL, (crtcGenCntl2 | CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B) ); - /* This is the code for the Aluminium PowerBooks M10 */ + /* This is the code for the Aluminium PowerBooks M10 / iBooks M11 */ if (rinfo->family == CHIP_FAMILY_RV350) { u32 sdram_mode_reg = rinfo->save_regs[35]; static u32 default_mrtable[] = @@ -2741,9 +2741,11 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) rinfo->pm_mode |= radeon_pm_d2; /* We can restart Jasper (M10 chip in albooks), BlueStone (7500 chip - * in some desktop G4s), and Via (M9+ chip on iBook G4) + * in some desktop G4s), Via (M9+ chip on iBook G4) and + * Snowy (M11 chip on iBook G4 manufactured after July 2005) */ - if (!strcmp(rinfo->of_node->name, "ATY,JasperParent")) { + if (!strcmp(rinfo->of_node->name, "ATY,JasperParent") || + !strcmp(rinfo->of_node->name, "ATY,SnowyParent")) { rinfo->reinit_func = radeon_reinitialize_M10; rinfo->pm_mode |= radeon_pm_off; } diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index 659bc9f6224..01b8b2f7851 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -395,6 +395,8 @@ static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms) #define INREG8(addr) readb((rinfo->mmio_base)+addr) #define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr) +#define INREG16(addr) readw((rinfo->mmio_base)+addr) +#define OUTREG16(addr,val) writew(val, (rinfo->mmio_base)+addr) #define INREG(addr) readl((rinfo->mmio_base)+addr) #define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr) diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c index 630f2dfa969..3c72c627e65 100644 --- a/drivers/video/backlight/corgi_bl.c +++ b/drivers/video/backlight/corgi_bl.c @@ -19,7 +19,6 @@ #include <linux/fb.h> #include <linux/backlight.h> -#include <asm/mach-types.h> #include <asm/arch/sharpsl.h> #define CORGI_DEFAULT_INTENSITY 0x1f diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c index ae2762cb560..6992100a508 100644 --- a/drivers/video/cyblafb.c +++ b/drivers/video/cyblafb.c @@ -410,20 +410,21 @@ static void cyblafb_imageblit(struct fb_info *info, out32(GE0C,point(image->dx+image->width-1,image->dy+image->height-1)); while(index < index_end) { + const char *p = image->data + index; for(i=0;i<width_dds;i++) { - out32(GE9C,*((u32*) ((u32)image->data + index))); + out32(GE9C,*(u32*)p); + p+=4; index+=4; } switch(width_dbs) { case 0: break; - case 8: out32(GE9C,*((u8*)((u32)image->data+index))); + case 8: out32(GE9C,*(u8*)p); index+=1; break; - case 16: out32(GE9C,*((u16*)((u32)image->data+index))); + case 16: out32(GE9C,*(u16*)p); index+=2; break; - case 24: out32(GE9C,(u32)(*((u16*)((u32)image->data+index))) | - (u32)(*((u8*)((u32)image->data+index+2)))<<16); + case 24: out32(GE9C,*(u16*)p | *(u8*)(p+2)<<16); index+=3; break; } diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index fda53aac1fc..689d2586366 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -44,7 +44,7 @@ static void i810i2c_setscl(void *data, int state) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOB, (state ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK); @@ -55,7 +55,7 @@ static void i810i2c_setsda(void *data, int state) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOB, (state ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK); @@ -66,7 +66,7 @@ static int i810i2c_getscl(void *data) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOB, SCL_DIR_MASK); i810_writel(mmio, GPIOB, 0); @@ -77,7 +77,7 @@ static int i810i2c_getsda(void *data) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOB, SDA_DIR_MASK); i810_writel(mmio, GPIOB, 0); @@ -88,7 +88,7 @@ static void i810ddc_setscl(void *data, int state) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOA, (state ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK); @@ -99,7 +99,7 @@ static void i810ddc_setsda(void *data, int state) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOA, (state ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK); @@ -110,7 +110,7 @@ static int i810ddc_getscl(void *data) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOA, SCL_DIR_MASK); i810_writel(mmio, GPIOA, 0); @@ -121,7 +121,7 @@ static int i810ddc_getsda(void *data) { struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data; struct i810fb_par *par = chan->par; - u8 *mmio = par->mmio_start_virtual; + u8 __iomem *mmio = par->mmio_start_virtual; i810_writel(mmio, GPIOA, SDA_DIR_MASK); i810_writel(mmio, GPIOA, 0); diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 6c2244cf0e7..1d54d3d6960 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -36,7 +36,6 @@ #include <asm/hardware.h> #include <asm/io.h> -#include <asm/mach-types.h> #include <asm/uaccess.h> #include <asm/arch/imxfb.h> diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index bf62e6ed038..80a09344f1a 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -226,7 +226,7 @@ MODULE_DEVICE_TABLE(pci, intelfb_pci_table); static int accel = 1; static int vram = 4; -static int hwcursor = 1; +static int hwcursor = 0; static int mtrr = 1; static int fixed = 0; static int noinit = 0; @@ -609,15 +609,9 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) dinfo->accel = 0; } - if (MB(voffset) < stolen_size) - offset = (stolen_size >> 12); - else - offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE; - /* Framebuffer parameters - Use all the stolen memory if >= vram */ - if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) + MB(vram))) { + if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) { dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size); - dinfo->fb.offset = 0; dinfo->fbmem_gart = 0; } else { dinfo->fb.size = MB(vram); @@ -648,6 +642,11 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } + if (MB(voffset) < stolen_size) + offset = (stolen_size >> 12); + else + offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE; + /* set the mem offsets - set them after the already used pages */ if (dinfo->accel) { dinfo->ring.offset = offset + gtt_info.current_memory; @@ -662,10 +661,11 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) + (dinfo->cursor.size >> 12); } + /* Allocate memories (which aren't stolen) */ /* Map the fb and MMIO regions */ /* ioremap only up to the end of used aperture */ dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache - (dinfo->aperture.physical, (dinfo->fb.offset << 12) + (dinfo->aperture.physical, ((offset + dinfo->fb.offset) << 12) + dinfo->fb.size); if (!dinfo->aperture.virtual) { ERR_MSG("Cannot remap FB region.\n"); @@ -682,7 +682,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } - /* Allocate memories (which aren't stolen) */ if (dinfo->accel) { if (!(dinfo->gtt_ring_mem = agp_allocate_memory(bridge, dinfo->ring.size >> 12, @@ -1484,7 +1483,7 @@ intelfb_cursor(struct fb_info *info, struct fb_cursor *cursor) #endif if (!dinfo->hwcursor) - return -ENXIO; + return soft_cursor(info, cursor); intelfbhw_cursor_hide(dinfo); diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c index 7808a01493a..b76a5a9a125 100644 --- a/drivers/video/p9100.c +++ b/drivers/video/p9100.c @@ -288,6 +288,9 @@ static void p9100_init_one(struct sbus_dev *sdev) all->par.physbase = sdev->reg_addrs[2].phys_addr; sbusfb_fill_var(&all->info.var, sdev->prom_node, 8); + all->info.var.red.length = 8; + all->info.var.green.length = 8; + all->info.var.blue.length = 8; linebytes = prom_getintdefault(sdev->prom_node, "linebytes", all->info.var.xres); @@ -323,6 +326,7 @@ static void p9100_init_one(struct sbus_dev *sdev) kfree(all); return; } + fb_set_cmap(&all->info.cmap, &all->info); list_add(&all->list, &p9100_list); diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 34d4dcc0320..194eed0a238 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -260,9 +260,9 @@ static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) } #ifdef CONFIG_CPU_FREQ - DPRINTK("dma period = %d ps, clock = %d kHz\n", - pxafb_display_dma_period(var), - get_clk_frequency_khz(0)); + pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n", + pxafb_display_dma_period(var), + get_clk_frequency_khz(0)); #endif return 0; @@ -270,7 +270,7 @@ static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) static inline void pxafb_set_truecolor(u_int is_true_color) { - DPRINTK("true_color = %d\n", is_true_color); + pr_debug("pxafb: true_color = %d\n", is_true_color); // do your machine-specific setup if needed } @@ -284,7 +284,7 @@ static int pxafb_set_par(struct fb_info *info) struct fb_var_screeninfo *var = &info->var; unsigned long palette_mem_size; - DPRINTK("set_par\n"); + pr_debug("pxafb: set_par\n"); if (var->bits_per_pixel == 16) fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; @@ -308,7 +308,7 @@ static int pxafb_set_par(struct fb_info *info) palette_mem_size = fbi->palette_size * sizeof(u16); - DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + pr_debug("pxafb: palette_mem_size = 0x%08lx\n", palette_mem_size); fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size); fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size; @@ -369,7 +369,7 @@ static int pxafb_blank(int blank, struct fb_info *info) struct pxafb_info *fbi = (struct pxafb_info *)info; int i; - DPRINTK("pxafb_blank: blank=%d\n", blank); + pr_debug("pxafb: blank=%d\n", blank); switch (blank) { case FB_BLANK_POWERDOWN: @@ -508,15 +508,15 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info * u_long flags; u_int lines_per_panel, pcd = get_pcd(var->pixclock); - DPRINTK("Configuring PXA LCD\n"); + pr_debug("pxafb: Configuring PXA LCD\n"); - DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n", - var->xres, var->hsync_len, - var->left_margin, var->right_margin); - DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n", - var->yres, var->vsync_len, - var->upper_margin, var->lower_margin); - DPRINTK("var: pixclock=%d pcd=%d\n", var->pixclock, pcd); + pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", + var->xres, var->hsync_len, + var->left_margin, var->right_margin); + pr_debug("var: yres=%d vslen=%d um=%d bm=%d\n", + var->yres, var->vsync_len, + var->upper_margin, var->lower_margin); + pr_debug("var: pixclock=%d pcd=%d\n", var->pixclock, pcd); #if DEBUG_VAR if (var->xres < 16 || var->xres > 1024) @@ -589,10 +589,10 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info * if (pcd) new_regs.lccr3 |= LCCR3_PixClkDiv(pcd); - DPRINTK("nlccr0 = 0x%08x\n", new_regs.lccr0); - DPRINTK("nlccr1 = 0x%08x\n", new_regs.lccr1); - DPRINTK("nlccr2 = 0x%08x\n", new_regs.lccr2); - DPRINTK("nlccr3 = 0x%08x\n", new_regs.lccr3); + pr_debug("nlccr0 = 0x%08x\n", new_regs.lccr0); + pr_debug("nlccr1 = 0x%08x\n", new_regs.lccr1); + pr_debug("nlccr2 = 0x%08x\n", new_regs.lccr2); + pr_debug("nlccr3 = 0x%08x\n", new_regs.lccr3); /* Update shadow copy atomically */ local_irq_save(flags); @@ -637,24 +637,24 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info * } #if 0 - DPRINTK("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu); - DPRINTK("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu); - DPRINTK("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu); - DPRINTK("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma); - DPRINTK("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma); - DPRINTK("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma); - - DPRINTK("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr); - DPRINTK("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr); - DPRINTK("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr); - - DPRINTK("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr); - DPRINTK("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr); - DPRINTK("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr); - - DPRINTK("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd); - DPRINTK("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd); - DPRINTK("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd); + pr_debug("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu); + pr_debug("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu); + pr_debug("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu); + pr_debug("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma); + pr_debug("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma); + pr_debug("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma); + + pr_debug("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr); + pr_debug("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr); + pr_debug("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr); + + pr_debug("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr); + pr_debug("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr); + pr_debug("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr); + + pr_debug("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd); + pr_debug("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd); + pr_debug("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd); #endif fbi->reg_lccr0 = new_regs.lccr0; @@ -684,7 +684,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info * */ static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on) { - DPRINTK("backlight o%s\n", on ? "n" : "ff"); + pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff"); if (pxafb_backlight_power) pxafb_backlight_power(on); @@ -692,7 +692,7 @@ static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on) static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on) { - DPRINTK("LCD power o%s\n", on ? "n" : "ff"); + pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff"); if (pxafb_lcd_power) pxafb_lcd_power(on); @@ -740,13 +740,13 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi) static void pxafb_enable_controller(struct pxafb_info *fbi) { - DPRINTK("Enabling LCD controller\n"); - DPRINTK("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0); - DPRINTK("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1); - DPRINTK("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0); - DPRINTK("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1); - DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2); - DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3); + pr_debug("pxafb: Enabling LCD controller\n"); + pr_debug("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0); + pr_debug("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1); + pr_debug("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0); + pr_debug("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1); + pr_debug("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2); + pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3); /* enable LCD controller clock */ pxa_set_cken(CKEN16_LCD, 1); @@ -761,19 +761,19 @@ static void pxafb_enable_controller(struct pxafb_info *fbi) FDADR1 = fbi->fdadr1; LCCR0 |= LCCR0_ENB; - DPRINTK("FDADR0 0x%08x\n", (unsigned int) FDADR0); - DPRINTK("FDADR1 0x%08x\n", (unsigned int) FDADR1); - DPRINTK("LCCR0 0x%08x\n", (unsigned int) LCCR0); - DPRINTK("LCCR1 0x%08x\n", (unsigned int) LCCR1); - DPRINTK("LCCR2 0x%08x\n", (unsigned int) LCCR2); - DPRINTK("LCCR3 0x%08x\n", (unsigned int) LCCR3); + pr_debug("FDADR0 0x%08x\n", (unsigned int) FDADR0); + pr_debug("FDADR1 0x%08x\n", (unsigned int) FDADR1); + pr_debug("LCCR0 0x%08x\n", (unsigned int) LCCR0); + pr_debug("LCCR1 0x%08x\n", (unsigned int) LCCR1); + pr_debug("LCCR2 0x%08x\n", (unsigned int) LCCR2); + pr_debug("LCCR3 0x%08x\n", (unsigned int) LCCR3); } static void pxafb_disable_controller(struct pxafb_info *fbi) { DECLARE_WAITQUEUE(wait, current); - DPRINTK("Disabling LCD controller\n"); + pr_debug("pxafb: disabling LCD controller\n"); set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&fbi->ctrlr_wait, &wait); @@ -1039,7 +1039,7 @@ static int __init pxafb_map_video_memory(struct pxafb_info *fbi) fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16; palette_mem_size = fbi->palette_size * sizeof(u16); - DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + pr_debug("pxafb: palette_mem_size = 0x%08lx\n", palette_mem_size); fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size); fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size; diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h index 22c00be786a..47f41f70db7 100644 --- a/drivers/video/pxafb.h +++ b/drivers/video/pxafb.h @@ -114,15 +114,6 @@ struct pxafb_info { #define PXA_NAME "PXA" /* - * Debug macros - */ -#if DEBUG -# define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args) -#else -# define DPRINTK(fmt, args...) -#endif - -/* * Minimum X and Y resolutions */ #define MIN_XRES 64 diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 00c0223a352..5ab79afb53b 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -228,8 +228,8 @@ static int s3c2410fb_check_var(struct fb_var_screeninfo *var, * information */ -static int s3c2410fb_activate_var(struct s3c2410fb_info *fbi, - struct fb_var_screeninfo *var) +static void s3c2410fb_activate_var(struct s3c2410fb_info *fbi, + struct fb_var_screeninfo *var) { fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_MODEMASK; |