diff options
Diffstat (limited to 'arch/powerpc/include/asm/fsl_guts.h')
| -rw-r--r-- | arch/powerpc/include/asm/fsl_guts.h | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h new file mode 100644 index 00000000000..bebd12463ec --- /dev/null +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -0,0 +1,197 @@ +/** + * Freecale 85xx and 86xx Global Utilties register set + * + * Authors: Jeff Brown + * Timur Tabi <timur@freescale.com> + * + * Copyright 2004,2007 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_POWERPC_FSL_GUTS_H__ +#define __ASM_POWERPC_FSL_GUTS_H__ +#ifdef __KERNEL__ + +/* + * These #ifdefs are safe because it's not possible to build a kernel that + * runs on e500 and e600 cores. + */ + +#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx) +#error Only 85xx and 86xx SOCs are supported +#endif + +/** + * Global Utility Registers. + * + * Not all registers defined in this structure are available on all chips, so + * you are expected to know whether a given register actually exists on your + * chip before you access it. + * + * Also, some registers are similar on different chips but have slightly + * different names. In these cases, one name is chosen to avoid extraneous + * #ifdefs. + */ +#ifdef CONFIG_PPC_85xx +struct ccsr_guts_85xx { +#else +struct ccsr_guts_86xx { +#endif + __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ + __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ + __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ + __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ + __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ + __be32 pordevsr2; /* 0x.0014 - POR device status register 2 */ + u8 res018[0x20 - 0x18]; + __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ + u8 res024[0x30 - 0x24]; + __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ + u8 res034[0x40 - 0x34]; + __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ + u8 res044[0x50 - 0x44]; + __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ + u8 res054[0x60 - 0x54]; + __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ + __be32 pmuxcr2; /* 0x.0064 - Alternate function signal multiplex control 2 */ + __be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */ + u8 res06c[0x70 - 0x6c]; + __be32 devdisr; /* 0x.0070 - Device Disable Control */ + __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ + u8 res078[0x7c - 0x78]; + __be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */ + __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ + __be32 pmrccr; /* 0x.0084 - Power Management Reset Counter Configuration Register */ + __be32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter Configuration Register */ + __be32 pmcdr; /* 0x.008c - 4Power management clock disable register */ + __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ + __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ + __be32 ectrstcr; /* 0x.0098 - Exception reset control register */ + __be32 autorstsr; /* 0x.009c - Automatic reset status register */ + __be32 pvr; /* 0x.00a0 - Processor Version Register */ + __be32 svr; /* 0x.00a4 - System Version Register */ + u8 res0a8[0xb0 - 0xa8]; + __be32 rstcr; /* 0x.00b0 - Reset Control Register */ + u8 res0b4[0xc0 - 0xb4]; +#ifdef CONFIG_PPC_85xx + __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register */ +#else + __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ +#endif + u8 res0c4[0x224 - 0xc4]; + __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ + __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ + u8 res22c[0x800 - 0x22c]; + __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ + u8 res804[0x900 - 0x804]; + __be32 ircr; /* 0x.0900 - Infrared Control Register */ + u8 res904[0x908 - 0x904]; + __be32 dmacr; /* 0x.0908 - DMA Control Register */ + u8 res90c[0x914 - 0x90c]; + __be32 elbccr; /* 0x.0914 - eLBC Control Register */ + u8 res918[0xb20 - 0x918]; + __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ + __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ + __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ + u8 resb2c[0xe00 - 0xb2c]; + __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ + u8 rese04[0xe10 - 0xe04]; + __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ + u8 rese14[0xe20 - 0xe14]; + __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ + __be32 cpfor; /* 0x.0e24 - L2 charge pump fuse override register */ + u8 rese28[0xf04 - 0xe28]; + __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ + __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ + u8 resf0c[0xf2c - 0xf0c]; + __be32 itcr; /* 0x.0f2c - Internal transaction control register */ + u8 resf30[0xf40 - 0xf30]; + __be32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */ + __be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */ +} __attribute__ ((packed)); + +#ifdef CONFIG_PPC_86xx + +#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ +#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ + +/* + * Set the DMACR register in the GUTS + * + * The DMACR register determines the source of initiated transfers for each + * channel on each DMA controller. Rather than have a bunch of repetitive + * macros for the bit patterns, we just have a function that calculates + * them. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) + */ +static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, + unsigned int co, unsigned int ch, unsigned int device) +{ + unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); + + clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); +} + +#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 +#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ +#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ +#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ +#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ +#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ +#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 +#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 +#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 +#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 + +/* + * Set the DMA external control bits in the GUTS + * + * The DMA external control bits in the PMUXCR are only meaningful for + * channels 0 and 3. Any other channels are ignored. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * value: the new value for the bit (0 or 1) + */ +static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts, + unsigned int co, unsigned int ch, unsigned int value) +{ + if ((ch == 0) || (ch == 3)) { + unsigned int shift = 2 * (co + 1) - (ch & 1) - 1; + + clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift); + } +} + +#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 +#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 +#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ + (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) +#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 +#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 +#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) +#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF +#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) + +#endif + +#endif +#endif |