Merge branch 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/irq

From Shawn Guo <shawn.guo@linaro.org>, this makes it possible to use
sparse irqs with mach-imx.

* 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx: enable SPARSE_IRQ for imx platform
  ARM: fiq: change FIQ_START to a variable
  tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
  ARM: imx: remove unneeded mach/irq.h inclusion
  i2c: imx: remove unneeded mach/irqs.h inclusion
  ARM: imx: add a legacy irqdomain for mx31ads
  ARM: imx: add a legacy irqdomain for 3ds_debugboard
  ARM: imx: pass gpio than irq number into mxc_expio_init
  ARM: imx: leave irq_base of wm8350_platform_data uninitialized
  dma: ipu: remove the use of ipu_platform_data
  ARM: imx: move irq_domain_add_legacy call into avic driver
  ARM: imx: move irq_domain_add_legacy call into tzic driver
  gpio/mxc: move irq_domain_add_legacy call into gpio driver
  ARM: imx: eliminate macro IRQ_GPIOx()
  ARM: imx: eliminate macro IOMUX_TO_IRQ()
  ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 46 insertions, 40 deletions

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 5ec72044ea4..c7573e50aa1 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1663,7 +1663,6 @@ static void __exit ipu_idmac_exit(struct ipu *ipu)
 
 static int __init ipu_probe(struct platform_device *pdev)
 {
-	struct ipu_platform_data *pdata = pdev->dev.platform_data;
 	struct resource *mem_ipu, *mem_ic;
 	int ret;
 
@@ -1671,7 +1670,7 @@ static int __init ipu_probe(struct platform_device *pdev)
 
 	mem_ipu	= platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	mem_ic	= platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!pdata || !mem_ipu || !mem_ic)
+	if (!mem_ipu || !mem_ic)
 		return -EINVAL;
 
 	ipu_data.dev = &pdev->dev;
@@ -1688,10 +1687,9 @@ static int __init ipu_probe(struct platform_device *pdev)
 		goto err_noirq;
 
 	ipu_data.irq_err = ret;
-	ipu_data.irq_base = pdata->irq_base;
 
-	dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
-		ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+	dev_dbg(&pdev->dev, "fn irq %u, err irq %u\n",
+		ipu_data.irq_fn, ipu_data.irq_err);
 
 	/* Remap IPU common registers */
 	ipu_data.reg_ipu = ioremap(mem_ipu->start, resource_size(mem_ipu));
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
index a71f55e72be..fa95bcc3de1 100644
--- a/drivers/dma/ipu/ipu_irq.c
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -14,6 +14,7 @@
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <mach/ipu.h>
 
@@ -354,10 +355,12 @@ static struct irq_chip ipu_irq_chip = {
 /* Install the IRQ handler */
 int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
 {
-	struct ipu_platform_data *pdata = dev->dev.platform_data;
-	unsigned int irq, irq_base, i;
+	unsigned int irq, i;
+	int irq_base = irq_alloc_descs(-1, 0, CONFIG_MX3_IPU_IRQS,
+				       numa_node_id());
 
-	irq_base = pdata->irq_base;
+	if (irq_base < 0)
+		return irq_base;
 
 	for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
 		irq_bank[i].ipu = ipu;
@@ -387,15 +390,16 @@ int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
 	irq_set_handler_data(ipu->irq_err, ipu);
 	irq_set_chained_handler(ipu->irq_err, ipu_irq_err);
 
+	ipu->irq_base = irq_base;
+
 	return 0;
 }
 
 void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
 {
-	struct ipu_platform_data *pdata = dev->dev.platform_data;
 	unsigned int irq, irq_base;
 
-	irq_base = pdata->irq_base;
+	irq_base = ipu->irq_base;
 
 	irq_set_chained_handler(ipu->irq_fn, NULL);
 	irq_set_handler_data(ipu->irq_fn, NULL);
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index c337143b18f..e5db670d000 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -33,8 +34,6 @@
 #include <asm-generic/bug.h>
 #include <asm/mach/irq.h>
 
-#define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
-
 enum mxc_gpio_hwtype {
 	IMX1_GPIO,	/* runs on i.mx1 */
 	IMX21_GPIO,	/* runs on i.mx21 and i.mx27 */
@@ -61,7 +60,7 @@ struct mxc_gpio_port {
 	void __iomem *base;
 	int irq;
 	int irq_high;
-	int virtual_irq_start;
+	struct irq_domain *domain;
 	struct bgpio_chip bgc;
 	u32 both_edges;
 };
@@ -144,14 +143,15 @@ static LIST_HEAD(mxc_gpio_ports);
 
 static int gpio_set_irq_type(struct irq_data *d, u32 type)
 {
-	u32 gpio = irq_to_gpio(d->irq);
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mxc_gpio_port *port = gc->private;
 	u32 bit, val;
+	u32 gpio_idx = d->hwirq;
+	u32 gpio = port->bgc.gc.base + gpio_idx;
 	int edge;
 	void __iomem *reg = port->base;
 
-	port->both_edges &= ~(1 << (gpio & 31));
+	port->both_edges &= ~(1 << gpio_idx);
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
@@ -168,7 +168,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 			edge = GPIO_INT_HIGH_LEV;
 			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
 		}
-		port->both_edges |= 1 << (gpio & 31);
+		port->both_edges |= 1 << gpio_idx;
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
@@ -180,11 +180,11 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		return -EINVAL;
 	}
 
-	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
-	bit = gpio & 0xf;
+	reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* ICR1 or ICR2 */
+	bit = gpio_idx & 0xf;
 	val = readl(reg) & ~(0x3 << (bit << 1));
 	writel(val | (edge << (bit << 1)), reg);
-	writel(1 << (gpio & 0x1f), port->base + GPIO_ISR);
+	writel(1 << gpio_idx, port->base + GPIO_ISR);
 
 	return 0;
 }
@@ -217,15 +217,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 /* handle 32 interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
-	u32 gpio_irq_no_base = port->virtual_irq_start;
-
 	while (irq_stat != 0) {
 		int irqoffset = fls(irq_stat) - 1;
 
 		if (port->both_edges & (1 << irqoffset))
 			mxc_flip_edge(port, irqoffset);
 
-		generic_handle_irq(gpio_irq_no_base + irqoffset);
+		generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
 
 		irq_stat &= ~(1 << irqoffset);
 	}
@@ -276,10 +274,9 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
  */
 static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 {
-	u32 gpio = irq_to_gpio(d->irq);
-	u32 gpio_idx = gpio & 0x1F;
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mxc_gpio_port *port = gc->private;
+	u32 gpio_idx = d->hwirq;
 
 	if (enable) {
 		if (port->irq_high && (gpio_idx >= 16))
@@ -296,12 +293,12 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 	return 0;
 }
 
-static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
+static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 {
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
-	gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start,
+	gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
 				    port->base, handle_level_irq);
 	gc->private = port;
 
@@ -352,7 +349,7 @@ static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 	struct mxc_gpio_port *port =
 		container_of(bgc, struct mxc_gpio_port, bgc);
 
-	return port->virtual_irq_start + offset;
+	return irq_find_mapping(port->domain, offset);
 }
 
 static int __devinit mxc_gpio_probe(struct platform_device *pdev)
@@ -360,6 +357,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct mxc_gpio_port *port;
 	struct resource *iores;
+	int irq_base;
 	int err;
 
 	mxc_gpio_get_hw(pdev);
@@ -430,20 +428,30 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto out_bgpio_remove;
 
-	/*
-	 * In dt case, we use gpio number range dynamically
-	 * allocated by gpio core.
-	 */
-	port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base :
-							     pdev->id * 32);
+	irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+	if (irq_base < 0) {
+		err = irq_base;
+		goto out_gpiochip_remove;
+	}
+
+	port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
+					     &irq_domain_simple_ops, NULL);
+	if (!port->domain) {
+		err = -ENODEV;
+		goto out_irqdesc_free;
+	}
 
 	/* gpio-mxc can be a generic irq chip */
-	mxc_gpio_init_gc(port);
+	mxc_gpio_init_gc(port, irq_base);
 
 	list_add_tail(&port->node, &mxc_gpio_ports);
 
 	return 0;
 
+out_irqdesc_free:
+	irq_free_descs(irq_base, 32);
+out_gpiochip_remove:
+	WARN_ON(gpiochip_remove(&port->bgc.gc) < 0);
 out_bgpio_remove:
 	bgpio_remove(&port->bgc);
 out_iounmap:
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 8d6b504d65c..370031ac820 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -53,7 +53,6 @@
 #include <linux/of_i2c.h>
 #include <linux/pinctrl/consumer.h>
 
-#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 4296a835029..d2e6f82ecfa 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -43,6 +43,7 @@
 #include <asm/fiq.h>
 #include <mach/dma-mx1-mx2.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/mx1_camera.h>
 
 /*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4ef747307ec..d5c689d6217 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -169,7 +169,6 @@
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
 #define DEV_NAME		"ttymxc"
-#define MAX_INTERNAL_IRQ	MXC_INTERNAL_IRQS
 
 /*
  * This determines how often we check the modem status signals
@@ -741,10 +740,7 @@ static int imx_startup(struct uart_port *port)
 
 		/* do not use RTS IRQ on IrDA */
 		if (!USE_IRDA(sport)) {
-			retval = request_irq(sport->rtsirq, imx_rtsint,
-				     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
-				       IRQF_TRIGGER_FALLING |
-				       IRQF_TRIGGER_RISING,
+			retval = request_irq(sport->rtsirq, imx_rtsint, 0,
 					DRIVER_NAME, sport);
 			if (retval)
 				goto error_out3;