Merge remote branch 'jturney/master'

19 files changed, 486 insertions, 348 deletions

diff --git a/hw/xwin/InitOutput.c b/hw/xwin/InitOutput.c
index 91f5ec09b..acb7d4ab2 100644
--- a/hw/xwin/InitOutput.c
+++ b/hw/xwin/InitOutput.c
@@ -746,6 +746,29 @@ OsVendorInit (void)
 static void
 winUseMsg (void)
 {
+  ErrorF("\n");
+  ErrorF("\n");
+  ErrorF(EXECUTABLE_NAME " Device Dependent Usage:\n");
+  ErrorF("\n");
+
+#ifdef XWIN_CLIPBOARD
+  ErrorF ("-[no]clipboard\n"
+	  "\tEnable [disable] the clipboard integration. Default is enabled.\n");
+#endif
+
+  ErrorF ("-clipupdates num_boxes\n"
+	  "\tUse a clipping region to constrain shadow update blits to\n"
+	  "\tthe updated region when num_boxes, or more, are in the\n"
+	  "\tupdated region.\n");
+
+#ifdef XWIN_XF86CONFIG
+  ErrorF ("-config\n"
+          "\tSpecify a configuration file.\n");
+
+  ErrorF ("-configdir\n"
+          "\tSpecify a configuration directory.\n");
+#endif
+
   ErrorF ("-depth bits_per_pixel\n"
 	  "\tSpecify an optional bitdepth to use in fullscreen mode\n"
 	  "\twith a DirectDraw engine.\n");
@@ -754,6 +777,15 @@ winUseMsg (void)
 	  "\tEmulate 3 button mouse with an optional timeout in\n"
 	  "\tmilliseconds.\n");
 
+#ifdef XWIN_EMULATEPSEUDO
+  ErrorF ("-emulatepseudo\n"
+	  "\tCreate a depth 8 PseudoColor visual when running in\n"
+	  "\tdepths 15, 16, 24, or 32, collectively known as TrueColor\n"
+	  "\tdepths.  The PseudoColor visual does not have correct colors,\n"
+	  "\tand it may crash, but it at least allows you to run your\n"
+	  "\tapplication in TrueColor modes.\n");
+#endif
+
   ErrorF ("-engine engine_type_id\n"
 	  "\tOverride the server's automatically selected engine type:\n"
 	  "\t\t1 - Shadow GDI\n"
@@ -766,135 +798,121 @@ winUseMsg (void)
 
   ErrorF ("-fullscreen\n"
 	  "\tRun the server in fullscreen mode.\n");
-  
-  ErrorF ("-refresh rate_in_Hz\n"
-	  "\tSpecify an optional refresh rate to use in fullscreen mode\n"
-	  "\twith a DirectDraw engine.\n");
 
-  ErrorF ("-screen scr_num [width height [x y] | [[WxH[+X+Y]][@m]] ]\n"
-	  "\tEnable screen scr_num and optionally specify a width and\n"
-	  "\theight and initial position for that screen. Additionally\n"
-	  "\ta monitor number can be specified to start the server on,\n"
-	  "\tat which point, all coordinates become relative to that\n"
-      "\tmonitor (Not for Windows NT4 and 95). Examples:\n"
-      "\t -screen 0 800x600+100+100@2 ; 2nd monitor offset 100,100 size 800x600\n"
-      "\t -screen 0 1024x768@3        ; 3rd monitor size 1024x768\n"
-      "\t -screen 0 @1 ; on 1st monitor using its full resolution (the default)\n");
-
-  ErrorF ("-lesspointer\n"
-	  "\tHide the windows mouse pointer when it is over an inactive\n"
-          "\t" PROJECT_NAME " window.  This prevents ghost cursors appearing where\n"
-	  "\tthe Windows cursor is drawn overtop of the X cursor\n");
-
-  ErrorF ("-nodecoration\n"
-          "\tDo not draw a window border, title bar, etc.  Windowed\n"
-	  "\tmode only.\n");
+  ErrorF ("-ignoreinput\n"
+	  "\tIgnore keyboard and mouse input.\n");
 
 #ifdef XWIN_MULTIWINDOWEXTWM
-  ErrorF ("-mwextwm\n"
-	  "\tRun the server in multi-window external window manager mode.\n");
-
   ErrorF ("-internalwm\n"
 	  "\tRun the internal window manager.\n");
 #endif
 
-  ErrorF ("-rootless\n"
-	  "\tRun the server in rootless mode.\n");
+#ifdef XWIN_XF86CONFIG
+  ErrorF ("-keyboard\n"
+	  "\tSpecify a keyboard device from the configuration file.\n");
+#endif
+
+  ErrorF ("-[no]keyhook\n"
+	  "\tGrab special Windows keypresses like Alt-Tab or the Menu "
+          "key.\n");
+
+  ErrorF ("-lesspointer\n"
+	  "\tHide the windows mouse pointer when it is over any\n"
+          "\t" EXECUTABLE_NAME " window.  This prevents ghost cursors appearing when\n"
+	  "\tthe Windows cursor is drawn on top of the X cursor\n");
+
+  ErrorF ("-logfile filename\n"
+	  "\tWrite log messages to <filename>.\n");
+
+  ErrorF ("-logverbose verbosity\n"
+	  "\tSet the verbosity of log messages. [NOTE: Only a few messages\n"
+	  "\trespect the settings yet]\n"
+	  "\t\t0 - only print fatal error.\n"
+	  "\t\t1 - print additional configuration information.\n"
+	  "\t\t2 - print additional runtime information [default].\n"
+	  "\t\t3 - print debugging and tracing information.\n");
+
+  ErrorF ("-[no]multimonitors or -[no]multiplemonitors\n"
+	  "\tUse the entire virtual screen if multiple\n"
+	  "\tmonitors are present.\n");
 
 #ifdef XWIN_MULTIWINDOW
   ErrorF ("-multiwindow\n"
 	  "\tRun the server in multi-window mode.\n");
 #endif
 
-  ErrorF ("-multiplemonitors\n"
-	  "\tEXPERIMENTAL: Use the entire virtual screen if multiple\n"
-	  "\tmonitors are present.\n");
+#ifdef XWIN_MULTIWINDOWEXTWM
+  ErrorF ("-mwextwm\n"
+	  "\tRun the server in multi-window external window manager mode.\n");
+#endif
 
-#ifdef XWIN_CLIPBOARD
-  ErrorF ("-[no]clipboard\n"
-	  "\tEnable [disable] the clipboard integration. Default is enabled.\n");
+  ErrorF ("-nodecoration\n"
+          "\tDo not draw a window border, title bar, etc.  Windowed\n"
+	  "\tmode only.\n");
 
+#ifdef XWIN_CLIPBOARD
   ErrorF ("-nounicodeclipboard\n"
-	  "\tDo not use Unicode clipboard even if NT-based platform.\n");
+	  "\tDo not use Unicode clipboard even if on a NT-based platform.\n");
 #endif
 
+  ErrorF ("-refresh rate_in_Hz\n"
+	  "\tSpecify an optional refresh rate to use in fullscreen mode\n"
+	  "\twith a DirectDraw engine.\n");
+
+  ErrorF ("-rootless\n"
+	  "\tRun the server in rootless mode.\n");
+
+  ErrorF ("-screen scr_num [width height [x y] | [[WxH[+X+Y]][@m]] ]\n"
+	  "\tEnable screen scr_num and optionally specify a width and\n"
+	  "\theight and initial position for that screen. Additionally\n"
+	  "\ta monitor number can be specified to start the server on,\n"
+	  "\tat which point, all coordinates become relative to that\n"
+      "\tmonitor (Not for Windows NT4 and 95). Examples:\n"
+      "\t -screen 0 800x600+100+100@2 ; 2nd monitor offset 100,100 size 800x600\n"
+      "\t -screen 0 1024x768@3        ; 3rd monitor size 1024x768\n"
+      "\t -screen 0 @1 ; on 1st monitor using its full resolution (the default)\n");
+
   ErrorF ("-scrollbars\n"
 	  "\tIn windowed mode, allow screens bigger than the Windows desktop.\n"
 	  "\tMoreover, if the window has decorations, one can now resize\n"
 	  "\tit.\n");
 
+  ErrorF ("-silent-dup-error\n"
+	  "\tIf another instance of " EXECUTABLE_NAME " with the same display number is running\n"
+     "\texit silently and don’t display any error message.\n");
+
+  ErrorF ("-swcursor\n"
+	  "\tDisable the usage of the Windows cursor and use the X11 software\n"
+	  "\tcursor instead.\n");
+
   ErrorF ("-[no]trayicon\n"
           "\tDo not create a tray icon.  Default is to create one\n"
 	  "\ticon per screen.  You can globally disable tray icons with\n"
 	  "\t-notrayicon, then enable it for specific screens with\n"
 	  "\t-trayicon for those screens.\n");
 
-  ErrorF ("-clipupdates num_boxes\n"
-	  "\tUse a clipping region to constrain shadow update blits to\n"
-	  "\tthe updated region when num_boxes, or more, are in the\n"
-	  "\tupdated region.  Currently supported only by `-engine 1'.\n");
-
-#ifdef XWIN_EMULATEPSEUDO
-  ErrorF ("-emulatepseudo\n"
-	  "\tCreate a depth 8 PseudoColor visual when running in\n"
-	  "\tdepths 15, 16, 24, or 32, collectively known as TrueColor\n"
-	  "\tdepths.  The PseudoColor visual does not have correct colors,\n"
-	  "\tand it may crash, but it at least allows you to run your\n"
-	  "\tapplication in TrueColor modes.\n");
-#endif
-
   ErrorF ("-[no]unixkill\n"
           "\tCtrl+Alt+Backspace exits the X Server.\n");
 
   ErrorF ("-[no]winkill\n"
           "\tAlt+F4 exits the X Server.\n");
 
-#ifdef XWIN_XF86CONFIG
-  ErrorF ("-config\n"
-          "\tSpecify a configuration file.\n");
-
-  ErrorF ("-configdir\n"
-          "\tSpecify a configuration directory.\n");
-
-  ErrorF ("-keyboard\n"
-	  "\tSpecify a keyboard device from the configuration file.\n");
-#endif
-
-  ErrorF ("-xkbrules XKBRules\n"
-	  "\tEquivalent to XKBRules in XF86Config files.\n");
-
-  ErrorF ("-xkbmodel XKBModel\n"
-	  "\tEquivalent to XKBModel in XF86Config files.\n");
-
   ErrorF ("-xkblayout XKBLayout\n"
 	  "\tEquivalent to XKBLayout in XF86Config files.\n"
 	  "\tFor example: -xkblayout de\n");
 
-  ErrorF ("-xkbvariant XKBVariant\n"
-	  "\tEquivalent to XKBVariant in XF86Config files.\n"
-	  "\tFor example: -xkbvariant nodeadkeys\n");
+  ErrorF ("-xkbmodel XKBModel\n"
+	  "\tEquivalent to XKBModel in XF86Config files.\n");
 
   ErrorF ("-xkboptions XKBOptions\n"
 	  "\tEquivalent to XKBOptions in XF86Config files.\n");
 
-  ErrorF ("-logfile filename\n"
-	  "\tWrite logmessages to <filename> instead of /tmp/Xwin.log.\n");
-
-  ErrorF ("-logverbose verbosity\n"
-	  "\tSet the verbosity of logmessages. [NOTE: Only a few messages\n"
-	  "\trespect the settings yet]\n"
-	  "\t\t0 - only print fatal error.\n"
-	  "\t\t1 - print additional configuration information.\n"
-	  "\t\t2 - print additional runtime information [default].\n"
-	  "\t\t3 - print debugging and tracing information.\n");
-
-  ErrorF ("-[no]keyhook\n"
-	  "\tGrab special windows key combinations like Alt-Tab or the Menu "
-          "key.\n These keys are discarded by default.\n");
+  ErrorF ("-xkbrules XKBRules\n"
+	  "\tEquivalent to XKBRules in XF86Config files.\n");
 
-  ErrorF ("-swcursor\n"
-	  "\tDisable the usage of the windows cursor and use the X11 software "
-	  "cursor instead\n");
+  ErrorF ("-xkbvariant XKBVariant\n"
+	  "\tEquivalent to XKBVariant in XF86Config files.\n"
+	  "\tFor example: -xkbvariant nodeadkeys\n");
 }
 
 /* See Porting Layer Definition - p. 57 */
diff --git a/hw/xwin/Makefile.am b/hw/xwin/Makefile.am
index a76b56957..8b1897235 100644
--- a/hw/xwin/Makefile.am
+++ b/hw/xwin/Makefile.am
@@ -151,7 +151,7 @@ XWin_DEPENDENCIES = $(XWIN_LIBS)
 XWin_LDADD = $(MULTIWINDOWEXTWM_LIBS) $(XWIN_LIBS) $(MAIN_LIB) $(XSERVER_LIBS) $(XSERVER_SYS_LIBS) $(XWIN_SYS_LIBS)
 
 .rc.o:
-	$(WINDRES) --use-temp-file -i $< --input-format=rc -o $@ -O coff -DPROJECT_NAME=\"$(VENDOR_NAME_SHORT)\"
+	$(WINDRES) --use-temp-file -i $< --input-format=rc -o $@ -O coff -I $(top_builddir)/include
 
 XWin_LDFLAGS = -mwindows -static
 
@@ -190,12 +190,14 @@ XWinrc.$(FILE_MAN_SUFFIX): XWinrc.man
 
 EXTRAMANDEFS = -D__logdir__=$(logdir) -D__sysconfdir__=$(sysconfdir) -D__datadir__=$(datadir)
 
+xwinconfigdir = $(sysconfdir)/X11
+xwinconfig_DATA = system.XWinrc
+
 include $(top_srcdir)/cpprules.in
 
 EXTRA_DIST = \
 	$(GLX_EXTRAS) \
 	$(MAN_SRCS) \
-	_usr_X11R6_lib_X11_system.XWinrc \
 	X.ico \
 	XWin.rc \
 	xlaunch/config.cc \
diff --git a/hw/xwin/XWin.exe.manifest b/hw/xwin/XWin.exe.manifest
new file mode 100755
index 000000000..221150d52
--- /dev/null
+++ b/hw/xwin/XWin.exe.manifest
@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
+	<description>The XWin X Windows server for Cygwin.</description>
+	<dependency>
+	   <dependentAssembly>
+	     <assemblyIdentity
+	       type="win32"
+	       name="Microsoft.Windows.Common-Controls"
+	       version="6.0.0.0"
+	       processorArchitecture="X86"
+	       publicKeyToken="6595b64144ccf1df"
+	       language="*"
+	     />
+	   </dependentAssembly>
+	</dependency>
+</assembly>
diff --git a/hw/xwin/XWin.man.pre b/hw/xwin/XWin.man.pre
index 0bad65c60..6b28b51d4 100644
--- a/hw/xwin/XWin.man.pre
+++ b/hw/xwin/XWin.man.pre
@@ -9,83 +9,171 @@ XWin \- X Server for the Cygwin environment on Microsoft Windows
 
 
 .SH DESCRIPTION
-.I XWin is an X Server for the X Window System on the Cygwin environment
+\fIXWin\fP is an X Server for the X Window System on the Cygwin environment
 running on Microsoft Windows.
 
 
 .SH MODES
-\fIXWin\fP can operate in five different and incompatible modes:
+\fIXWin\fP can operate in 3 different modes:
 .br
-* \fISingle Window\fP: This is the default option.  The X server
-appears as a single Windows window and all X windows are contained
-within this window.  This mode requires an external window manager.
-.br
-* \fINo Decoration\fP: This mode is like single window mode except
-that the X server window does not have a title bar or border, thus
-maximizing the amount of space available for X windows within the X
-server window.  This mode requires an external window manager.
-.br
-* \fIFull Screen\fP: This mode is like single window mode except that
-the X server window takes the full screen, covering completely the
-Windows desktop.  This mode requires an external window manager.
-.br
-* \fIRootless\fP: The X server works on a window covering the whole
-screen but the root window (traditionally covered with an X hatch
-pattern) is hidden from view.  This mode requires an external window
-manager.
+* \fISingle Window\fP: This is the default mode.  Each X screen
+appears as a single \fIWindows\fP window and all X windows are contained
+within this window.
+(In X terminology, the \fIWindows\fP window contains the root window for
+the screen)
 .br
 * \fIMulti-Window\fP: In this mode \fIXWin\fP uses its own integrated
 window manager in order to handle the top-level X windows, in such a
-way that they appear as normal Windows windows.
+way that they appear as normal \fIWindows\fP windows.
+.br
+* \fIRootless\fP: In this mode the X server works in a window
+containing the whole screen but this root window (traditionally covered with an X hatch
+pattern) is hidden from view, so only top-level X windows are seen.
+
+.SH OPTIONS
+In addition to the normal server options described in the \fIXserver(1)\fP
+manual page, \fIXWin\fP accepts the following command line switches,
+\fIall\fP of which are optional:
+
+.SH OPTIONS CONTROLLING WINDOWING MODE
+Only one of these options may be specified.
+.TP 8
+.B (default)
+Windowed or rooted mode.
+Each X screen appears as a single \fIWindows\fP window and all X windows are
+contained within those windows.
+.TP 8
+.B \-multiwindow
+Each top-level X window appears in its own \fIWindows\fP window.
+Also start the integrated \fIWindows\fP-based window manager.
+.TP 8
+.B \-rootless
+Run the server in rootless mode.
+The X server works on a window covering the whole screen but the root window
+is hidden from view.
+.TP 8
+.B \-mwextwm
+Experimental.
+The mode combines \fB\-rootless\fP mode drawing with native \fIWindows\fP
+window frames managed by the experimental external window manager \fIxwinwm\fP.
 .PP
-NOTE: \fIMulti-Window\fP mode will crash if an external window manager
-such as \fItwm\fP or \fIfvwm\fP is launched since \fIMulti-Window\fP
-uses its own internal window manager; all other modes require an
-external window manager in order to move, resize, and perform other
+\fBNOTE:\fP \fI-multiwindow\fP mode uses its own internal window manager.
+All other modes require an external window manager in order to move, resize, and perform other
 operations on the individual X windows.
 
+.SH OPTIONS FOR SPECIFYING X SCREENS
+An X display may be composed of multiple screens.
+The default behaviour is to create a single screen 0 that is roughly the
+size of useful area of the primary monitor (allowing for any window
+decorations and the task-bar).
 
-.SH LOG
-As it runs \fIXWin\fP writes messages indicating the most relevant events
-to  the console
-from which it was called and to a log file that by default is located at \fI
-__logdir__/XWin.0.log\fP.  This file is mainly for debugging purposes.
+Screen specific parameters, such as \fB\-fullscreen\fP, can be applied as a
+default to all screens by placing those screen specific parameters
+before any \fB\-screen\fP parameter.  Screen specific parameters placed after
+the first \fB\-screen\fP parameter will apply only to the immediately
+preceeding \fB\-screen\fP parameter.
+.TP 8
+.B \-[no]multimonitors or \-[no]multiplemonitors
+Create a screen 0 that covers all monitors [the primary monitor] on a system with
+multiple monitors.
+This option is currently enabled by default in \fB\-multiwindow\fP mode.
+.TP 8
+.B "\-screen \fIscreen_number\fP [\fIW\fP \fIH\fP [\fIX\fP \fIY\fP] | [[\fIW\fPx\fIH\fP[+\fIX\fP+\fIY\fP]][@\fIM\fP]] ] "
+Create screen number
+.I screen_number
+and optionally specify it's
+.I height,
+.I width
+and
+.I initial position.
+Additionally a
+.I
+monitor number
+(which count from 1) can be specified to place the screen on,
+at which point, all coordinates become relative to that monitor.
+Screen numbers must be contiguous starting from zero and cannot be duplicated.
 
+Examples:
 
-.SH PREFERENCES FILE
-On startup \fIXWin\fP looks for the file \fI$HOME/.XWinrc\fP or, if
-the previous file does not exist, \fI
-__sysconfdir__/X11/system.XWinrc\fP.  \fI.XWinrc\fP allows setting
-preferences for the following:
-.br
-1- To include items into the menu associated with the \fIXWin\fP icon
-which is in the \fIWindows\fP system tray.  This functions in all
-modes that have a tray icon.
-.br
-2- To include items in the menu which is associated with the Windows
-window that \fIXWin -multiwindow\fP produces for each top-level X
-window.  That can be done both for the generic case and for particular
-programs.
-.br
-3- To change the icon that is associated to the Windows window that
-\fIXWin -multiwindow\fP produces for each top-level X-window.  Again,
-that can be done both for the generic case and for particular
-programs.
-.PP
-The format of the \fI.XWinrc\fP file is given in the man page XWinrc(5).
+.I "  -screen 0 @1 ; on 1st monitor using its full resolution (the default)"
 
+.I "  -screen 0 800x600+100+100@2 ; on 2nd monitor offset 100,100 size 800x600"
 
-.SH OPTIONS
-In addition to the normal server options described in the \fIXserver(1)\fP
-manual page, \fIXWin\fP accepts the following command line switches,
-\fIall\fP of which are optional:
+.I "  -screen 0 1024x768@3        ; on 3rd monitor size 1024x768"
+
+.SH OPTIONS CONTROLLING THE APPEARANCE OF THE X SCREEN WINDOWS
+These parameters only apply to windowed mode screens i.e. not
+in \fB-multwindow\fP or \fB-rootless\fP mode
+.TP 8
+.B "\-fullscreen"
+The X server window takes the full screen, covering completely the
+\fIWindows\fP desktop.
+.TP 8
+.B \-nodecoration
+Do not give the Cygwin/X window a \fIWindows\fP window border, title bar,
+etc.
+This parameter is ignored when the \fB\-fullscreen\fP parameter is specified.
+.TP 8
+.B \-scrollbars
+In windowed mode, allow screens bigger than the \fIWindows\fP desktop.
+Moreover, if the window has decorations, one can now resize it.
+This parameter is ignored when the \fB\-fullscreen\fP parameter is specified.
+
+
+.SH OPTIONS CONTROLLING WINDOWS INTEGRATION
 .TP 8
 .B \-[no]clipboard
 Enables [disables] the integration between the Cygwin/X clipboard and
-Windows clipboard.  The default is enabled.
+\fIWindows\fP clipboard.  The default is enabled.
+.TP 8
+.B "\-emulate3buttons [\fItimeout\fP]"
+Emulate a three button mouse; pressing both buttons within
+.I timeout
+milliseconds causes an emulated middle button press.  The default
+.I timeout
+is 50 milliseconds.  Note that most mice with scroll wheel have middle
+button functionality, usually you will need this option only if you have
+a two button mouse without scroll wheel.
+.TP 8
+.B \-[no]keyhook
+Enable [disable] a low-level keyboard hook for catching
+special keypresses like Menu and Alt+Tab and passing them to the X
+Server instead of letting \fIWindows\fP handle them.
+.TP 8
+.B \-lesspointer
+Normally the \fIWindows\fP mouse cursor is hidden when the mouse is
+over an active Cygwin/X window.  This option causes the mouse cursor
+also to be hidden when it is over an inactive Cygwin/X window.  This
+prevents the \fIWindows\fP mouse cursor from being drawn on top of the X
+cursor.
+This parameter has no effect unless \fB-swcursor\fP is also specified.
+.TP 8
+.B \-swcursor
+Disable the usage of the \fIWindows\fP cursor and use the X11 software cursor instead.
+.TP 8
+.B \-[no]trayicon
+Do not create a tray icon.  Default is to create one
+icon per screen.  You can globally disable tray icons with
+\fB\-notrayicon\fP, then enable it for specific screens with
+\fB\-trayicon\fP for those screens.
+.TP 8
+.B \-nounicodeclipboard
+Do not use Unicode clipboard even if on a NT-based platform.
+.TP 8
+.B \-[no]unixkill
+Enable or disable the \fICtrl-Alt-Backspace\fP key combination as a
+signal to exit the X Server.  The \fICtrl-Alt-Backspace\fP key combination
+is disabled by default.
+.TP 8
+.B \-[no]winkill
+Enable or disable the \fIAlt-F4\fP key combination as a signal to exit the
+X Server.
+The \fIAlt-F4\fP key combination is enabled by default.
+
+.SH DRAWING ENGINE OPTIONS
 .TP 8
 .B "\-clipupdates \fInum_boxes\fP"
-Specify an optional threshold, above which the boxes in a shadow
+Specify an optional threshold, above which the regions in a shadow
 update operation will be collected into a GDI clipping region.  The
 clipping region is then used to do a single bit block transfer that is
 constrained to the updated area by the clipping region.  There is some
@@ -94,36 +182,24 @@ the clipping region, thus there may not be much benefit for a small
 number of boxes (less than 10).  It is even possible that this
 functionality does not provide a benefit at any number of boxes; we
 can only determine the usefulness of this feature through testing.
+This option probably has limited effect on current \fIWindows\fP versions
+as they already perform GDI batching.
 This parameter works in conjunction with engines 1, 2, and 4 (Shadow
 GDI, Shadow DirectDraw, and Shadow DirectDraw Non-Locking,
 respectively).
 .TP 8
-.B "\-emulate3buttons \fItimeout\fP"
-Emulate a three button mouse; pressing both buttons within
-.I timeout
-milliseconds causes an emulated middle button press.  The default
-.I timeout
-is 50 milliseconds.  Note that most mice with scroll wheel have middle
-button functionality, usually you will need this option only if you have
-a two button mouse without scroll wheel.
-.TP 8
-.B \-emulatepseudo
-Create a depth 8 PseudoColor visual when running in depths 15, 16, 24,
-or 32, collectively known as TrueColor depths.
- At this date (April 2004) this option is not still operative.
-.TP 8
 .B "\-engine \fIengine_type_id\fP"
 This option, which is intended for Cygwin/X developers,
-overrides the server's automatically supported engine type.  This
+overrides the server's automatically selected engine type.  This
 parameter will be ignored if the specified engine type is not
 supported on the current system.  The supported engine type ids are 1
-- Shadow GDI, 2 - Shadow DirectDraw, and 4 - Shadow DirectDraw4.
-Additionally, there is a barely functional experimental engine type id
-16 - Native GDI.
-.TP 8
-.B "\-fullscreen [-depth \fIdepth\fP] [-refresh \fIrate_in_Hz\fP]"
-Run the server in fullscreen mode, as opposed to the default windowed
-mode.
+- Shadow GDI, 2 - Shadow DirectDraw, and 4 - Shadow DirectDraw Non-Locking.
+Additionally, there are engines with type ids
+8 - Primary DirectDraw (obsolete) and 16 - Native GDI (experimental and barely functional).
+Default behavior is to determine the engine with optimum performance that
+supports the specified depth and window configuration.
+
+.SH FULLSCREEN OPTIONS
 .TP 8
 .B "\-depth \fIdepth\fP"
 Specify the color depth, in bits per pixel, to use when running in
@@ -134,104 +210,37 @@ fullscreen with a DirectDraw engine.  This parameter is ignored if
 Specify an optional refresh rate to use when running in
 fullscreen with a DirectDraw engine.  This parameter is ignored if
 \fB\-fullscreen\fP is not specified.
+
+.SH MISCELLANEOUS OPTIONS
+See also the normal server options described in the \fIXserver(1)\fP
+manual page
+
 .TP 8
 .B \-help
-Write a help text to the console and to the log file.
+Write a help text listing supported command line options and their description to the console.
 .TP 8
 .B \-ignoreinput
 Ignore keyboard and mouse input.  This is usually only used for testing
 and debugging purposes.
 .TP 8
-.B \-[no]keyhook
-Enable [disable] a low-level keyboard hook for catching
-special key combinations like Alt+Tab and passing them to the X
-Server instead of letting \fIWindows\fP handle them.
-.TP 8
-.B \-lesspointer
-Hide the Windows mouse cursor when the mouse is over any Cygwin/X
-window (regardless of whether that window is active or inactive).  This
-prevents the Windows mouse cursor from being placed overtop of the X
-cursor.
-.TP 8
-.B "\-logfile \fIFile_Name\fP"
-Change the log file from the default located at \fI
-__logdir__/XWin.0.log\fP to the one indicated by \fIFile_Name\fP.
+.B "\-logfile \fIfilename\fP"
+Change the server log file from the default of \fI
+__logdir__/XWin.n.log\fP,
+where \fIn\fP is the display number of the XWin server, to \fIfilename\fP.
 .TP 8
 .B "\-logverbose \fIlevel\fP"
 Control the degree of verbosity of the log messages with the integer
 parameter \fIlevel\fP.  For \fIlevel\fP=0 only fatal errors are
-reported, for \fIlevel\fP=1 (default) simple information about
-configuration is also given, for \fIlevel\fP=2 a detailed log
+reported, for \fIlevel\fP=1 simple information about
+configuration is also given, for \fIlevel\fP=2 (default)
+additional runtime information is recorded
+and for \fIlevel\fP=3 detailed log
 information (including trace and debug output) is produced.  Bigger
-values will yield a still more detailed debug output.  At this date
-(April 2004) the option is still not fully operative; the default
-value is 2 and the output is insensitive to the level value.
-.TP 8
-.B \-multimonitors
-Create a root window that covers all monitors on a system with
-multiple monitors.
-.TP 8
-.B \-multiwindow
-Start the integrated \fIWindowsi\fP-based window manager, which launches each
-top-level X window in its own \fIWindows\fP window.  Not to be used together
-with \fB\-rootless\fP nor \fB\-fullscreen\fP.
-.TP 8
-.B \-nodecoration
-Do not give the Cygwin/X window a Windows window border, title bar,
-etc.  This parameter only applies to windowed mode screens, i.e., this
-parameter is ignored when the \fB\-fullscreen\fP parameter is specified.
-.TP 8
-.B \-nounicodeclipboard
-Do not use Unicode clipboard even if NT-based platform.
-.TP 8
-.B \-rootless
-Run the server in rootless mode.  Not to be used with \fB\-multiwindow\fP
-nor with \fB\-fullscreen\fP.
-.TP 8
-.B "\-screen \fIscreen_number\fP \fIwidth\fP \fIheight\fP"
-This parameter may be used to specify the
-.I screen_number,
-.I height,
-and
-.I width
-of one or several Cygwin/X screens; each Cygwin/X screen will be
-opened in its own window.  When using multiple screens, be sure not to
-duplicate any screen numbers.
-.I XWin
-default behavior is to create a single screen that is roughly
-the size of the current Windows display area.
-Screen specific parameters, such as \fB\-fullscreen\fP, can be applied as a
-default to all screens by placing those screen specific parameters
-before any \fB\-screen\fP parameter.  Screen specific parameters placed after
-the first \fB\-screen\fP parameter will apply only to the immediately
-preceeding \fB\-screen\fP parameter.
-.TP 8
-.B \-scrollbars
-In windowed mode, allow screens bigger than the Windows desktop.
-Moreover, if the window has decorations, one can now resize it.
-.TP 8
-.B \-[no]trayicon
-Do not create a tray icon.  Default is to create one
-icon per screen.  You can globally disable tray icons with
-\fB\-notrayicon\fP, then enable it for specific screens with
-\fB\-trayicon\fP for those screens.
-.TP 8
-.B \-[no]unixkill
-Enable or disable the \fICtrl-Alt-Backspace\fP key combination as a
-signal to exit the X Server.  The \fICtrl-Alt-Backspace\fP key combination
-is disabled by default.
-.TP 8
-.B \-[no]winkill
-Enable or disable the \fIAlt-F4\fP key combination as a signal to exit the
-X Server.
-The \fIAlt-F4\fP key combination is enabled by default.
-.TP 8
-.B \-swcursor
-Disable the usage of the windows cursor and use the X11 software cursor instead.
+values will yield a still more detailed debug output.
 .TP 8
 .B \-silent-dup-error
-If another instance of XWin is found running, exit silently and don't display
-the error message.
+If another instance of \fIXWin\fP with the same display number is found running,
+exit silently and don't display any error message.
 .TP 8
 .B "\-xkblayout \fIlayout\fP"
 .TP 8
@@ -251,10 +260,60 @@ in order to load a German layout for a pc105 keyboard one uses
 the options:
 .br
 .I " \-xkblayout de \-xkbmodel pc105"
+
+Alternatively one may use the \fIsetxkbmap\fP program after \fIXWin\fP is
+running.
+
+The default is to select a layout matching your current layout as
+reported by \fIWindows\fP if known, or the default X server layout
+if no matching keyboard layout was found.
+
+.SH UNDOCUMENTED OPTIONS
+These options are undocumented.  Do not use them.
+
+.TP 8
+.B \-emulatepseudo
+Create a depth 8 PseudoColor visual when running in depths 15, 16, 24,
+or 32, collectively known as TrueColor depths.
+Color map manipulation is not supported, so the PseudoColor visual will
+not have the correct colors.
+This option is intended to allow applications which only work with a depth 8
+visual to operate in TrueColor modes.
+.TP 8
+.B \-internalwm
+Run the internal window manager.
+
+.SH LOG FILE
+As it runs \fIXWin\fP writes messages indicating the most relevant events
+to  the console
+from which it was called and to a log file that by default is located at \fI
+__logdir__/XWin.0.log\fP.  This file is mainly for debugging purposes.
+
+
+.SH PREFERENCES FILE
+On startup \fIXWin\fP looks for the file \fI$HOME/.XWinrc\fP or, if
+the previous file does not exist, \fI
+__sysconfdir__/X11/system.XWinrc\fP.  \fI.XWinrc\fP allows setting
+preferences for the following:
+.br
+* To include items into the menu associated with the \fIXWin\fP icon
+which is in the \fIWindows\fP system tray.  This functions in all
+modes that have a tray icon.
+.br
+* To include items in the system menu which is associated with the \fIWindows\fP
+window that \fIXWin -multiwindow\fP produces for each top-level X
+window, in both the generic case and for particular programs.
+.br
+* To change the icon that is associated to the \fIWindows\fP window that
+\fIXWin -multiwindow\fP produces for each top-level X-window.
+.br
+* To change the style that is associated to the \fIWindows\fP window that
+\fXWin I-multiwindow\fP produces for each top-level X window.
 .PP
-Alternatively one may use the \fIsetxkbmap\fP program after XWin is
-running or even the \fIxmodmap\fP program for loading the old-style
-keyboard maps.
+The format of the \fI.XWinrc\fP file is given in the man page XWinrc(5).
+
+.SH EXAMPLES
+Need some examples
 
 
 .SH "SEE ALSO"
@@ -268,10 +327,9 @@ ones are:
 .br
 - The display mode can not be changed once the X server has started.
 .br
-- The XWin software is developing rapidly; it is therefore likely that
+- The \fIXWin\fP software is continuously developing; it is therefore possible that
 this man page is not up to date.  It is always prudent to
-look also at the output of \fIXWin -help\fP and to the Cygwin/X User Guide
-at /usr/share/doc/cygwin-x-doc-x.x.x/ug/cygwin-x-ug.xxx in order to
+look also at the output of \fIXWin -help\fP in order to
 check the options that are operative.
 
 
@@ -282,6 +340,7 @@ Adamson, Michael Bax, Jehan Bing, Lev Bishop, Dr. Peter Busch, Biju G
 C, Robert Collins, Nick Crabtree, Early Ehlinger, Christopher Faylor,
 John Fortin, Brian Genisio, Fabrizio Gennari, Alexander Gottwald, Ralf
 Habacker, Colin Harrison, Matthieu Herrb, Alan Hourihane, Pierre A
-Humblet, Harold L Hunt II, Dakshinamurthy Karra, Kensuke Matsuzaki,
-Takuma Murakami, Earle F. Philhower III, Benjamin Riefenstahl, Suhaib
-Siddiqi, Jack Tanner, and Nicholas Wourms.
+Humblet, Harold L Hunt II, Dakshinamurthy Karra, Joe Krahn,
+Paul Loewenstein, Kensuke Matsuzaki,
+Takuma Murakami, Earle F. Philhower III, Benjamin Riefenstahl, Yaakov Selkowitz,
+Suhaib Siddiqi, Jack Tanner, Jon Turney and Nicholas Wourms.
diff --git a/hw/xwin/XWin.rc b/hw/xwin/XWin.rc
index df2664dca..539bd0e4d 100644
--- a/hw/xwin/XWin.rc
+++ b/hw/xwin/XWin.rc
@@ -1,5 +1,6 @@
 /*
  *Copyright (C) 2002-2004 Harold L Hunt II All Rights Reserved.
+ *Copyright (C) 2008 Yaakov Selkowitz All Rights Reserved
  *
  *Permission is hereby granted, free of charge, to any person obtaining
  * a copy of this software and associated documentation files (the
@@ -20,39 +21,37 @@
  *CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
  *WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
- *Except as contained in this notice, the name of Harold L Hunt II
+ *Except as contained in this notice, the names of the authors
  *shall not be used in advertising or otherwise to promote the sale, use
  *or other dealings in this Software without prior written authorization
- *from Harold L Hunt II.
+ *from the authors.
  *
- * Authors:	Harold L Hunt II
+ * Authors:	Harold L Hunt II, Yaakov Selkowitz
  */
 
-#include "windows.h"
+#include <windows.h>
 #include "winresource.h"
+#include "xwin-config.h"
+#include "version-config.h"
 
 /*
  * Dialogs
  */
 
 /* About */
-ABOUT_BOX DIALOGEX 32, 32, 240, 105
+ABOUT_BOX DIALOGEX 32, 32, 260, 105
 STYLE WS_POPUP | WS_CAPTION | WS_SYSMENU | WS_VISIBLE | WS_TABSTOP  | DS_CENTERMOUSE
-CAPTION "About " PROJECT_NAME
-FONT 8, "MS Sans Serif"
+CAPTION "About " XVENDORNAMESHORT
+FONT 8, "MS Shell Dlg 2"
 BEGIN
-  CONTROL               PROJECT_NAME " Website", ID_ABOUT_WEBSITE, "Button",
-                        BS_OWNERDRAW | WS_TABSTOP, 30, 45, 75, 15
-  CONTROL               "Change Log", ID_ABOUT_CHANGELOG, "Button",
-                        BS_OWNERDRAW | WS_TABSTOP, 135, 45, 75, 15
-  CONTROL               "User's Guide", ID_ABOUT_UG, "Button",
-                        BS_OWNERDRAW | WS_TABSTOP, 30, 65, 75, 15
-  CONTROL               "FAQ", ID_ABOUT_FAQ, "Button",
-                        BS_OWNERDRAW | WS_TABSTOP, 135, 65, 75, 15
-
-  DEFPUSHBUTTON		"&OK", IDOK, 95, 85, 50, 15
-
-  CTEXT			PROJECT_NAME " X Server.  Use the links below to learn more about the " PROJECT_NAME " project.", IDC_STATIC, 5, 5, 230, 35
+  CONTROL				IDI_XWIN, IDC_STATIC, "Static", SS_ICON, 8, 8, 32, 32
+  LTEXT			XVENDORNAMESHORT " X Server ", IDC_STATIC, 36, 8, 220, 8
+  LTEXT			VENDOR_MAN_VERSION, IDC_STATIC, 36, 18, 220, 8
+  LTEXT			BUILDERSTRING, IDC_STATIC, 36, 28, 220, 8
+  LTEXT			"This software is licensed under the terms of the MIT/X11 License.", IDC_STATIC, 36, 48, 220, 20
+  CONTROL               __VENDORDWEBSUPPORT__, ID_ABOUT_WEBSITE, "Button",
+                        BS_OWNERDRAW | WS_TABSTOP, 36, 68, 68, 8
+  DEFPUSHBUTTON		"&OK", IDOK, 105, 85, 50, 15
 END
 
 
@@ -60,13 +59,13 @@ END
 
 DEPTH_CHANGE_BOX DIALOGEX 32, 32, 180, 100
 STYLE WS_POPUP | WS_CAPTION | WS_SYSMENU | WS_VISIBLE | DS_CENTERMOUSE
-FONT 8, "MS Sans Serif"
-CAPTION PROJECT_NAME
+FONT 8, "MS Shell Dlg 2"
+CAPTION XVENDORNAMESHORT
 BEGIN
   DEFPUSHBUTTON		"Dismiss", IDOK, 66, 80, 50, 14
-  CTEXT			PROJECT_NAME, IDC_STATIC, 40, 12, 100, 8
+  CTEXT			XVENDORNAMESHORT, IDC_STATIC, 40, 12, 100, 8
   CTEXT			"Disruptive screen configuration change.", IDC_STATIC, 7, 40, 166, 8
-  CTEXT			"Restore previous resolution to use " PROJECT_NAME ".", IDC_STATIC, 7, 52, 166, 8
+  CTEXT			"Restore previous resolution to use " XVENDORNAMESHORT ".", IDC_STATIC, 7, 52, 166, 8
 END
 
 
@@ -74,8 +73,8 @@ END
 
 EXIT_DIALOG DIALOGEX 32, 32, 180, 78
 STYLE WS_POPUP | WS_CAPTION | WS_SYSMENU | WS_VISIBLE | WS_TABSTOP | DS_CENTERMOUSE
-FONT 8, "MS Sans Serif"
-CAPTION "Exit " PROJECT_NAME "?"
+FONT 8, "MS Shell Dlg 2"
+CAPTION "Exit " XVENDORNAMESHORT "?"
 BEGIN
   PUSHBUTTON "E&xit", IDOK, 55, 56, 30, 14
   DEFPUSHBUTTON "&Cancel", IDCANCEL, 95, 56, 30, 14
@@ -96,7 +95,7 @@ BEGIN
 		MENUITEM "&Hide Root Window", ID_APP_HIDE_ROOT
 		MENUITEM "&About...", ID_APP_ABOUT
 		MENUITEM SEPARATOR
-		MENUITEM "E&xit", ID_APP_EXIT
+		MENUITEM "E&xit...", ID_APP_EXIT
 	END
 END
 
@@ -106,3 +105,4 @@ END
  */
 
 IDI_XWIN		ICON	"X.ico"
+CREATEPROCESS_MANIFEST_RESOURCE_ID	RT_MANIFEST	"XWin.exe.manifest"
diff --git a/hw/xwin/_usr_X11R6_lib_X11_system.XWinrc b/hw/xwin/system.XWinrc
index 1de6e2ab0..f0771c610 100644
--- a/hw/xwin/_usr_X11R6_lib_X11_system.XWinrc
+++ b/hw/xwin/system.XWinrc
@@ -1,7 +1,7 @@
 # XWin Server Resource File - EXAMPLE
 # Earle F. Philhower, III
 
-# Place in ~/.XWinrc or in /usr/X11R6/lib/X11/system.XWinrc
+# Place in ~/.XWinrc or in /etc/X11/system.XWinrc
 
 # Keywords are case insensitive, comments legal pretty much anywhere
 # you can have an end-of-line
@@ -18,6 +18,9 @@
 #                               ^^ This command will have any "%display%"
 #                                  string replaced with the proper display
 #                                  variable (i.e. 127.0.0.1:<display>.0)
+#                                  (This should only rarely be needed as
+#                                  the DISPLAY environment variable is also
+#                                  set correctly)
 #  or	<Menu Text>	MENU	<name-of-some-prior-defined-menu>
 #  or	<Menu Text>	ALWAYSONTOP
 #                         ^^ Sets the window to display above all others
@@ -80,7 +83,7 @@
 // Make some menus...
 menu apps {
 	xterm	exec	"xterm"
-	"Emacs"		exec	"emacs"
+	"Emacs"	exec	"emacs"
 	notepad	exec	notepad
 	xload	exec	"xload -display %display%"  # Comment
 }
diff --git a/hw/xwin/winclipboardthread.c b/hw/xwin/winclipboardthread.c
index e5b2dc1e0..a3809034e 100644
--- a/hw/xwin/winclipboardthread.c
+++ b/hw/xwin/winclipboardthread.c
@@ -119,8 +119,7 @@ winClipboardProc (void *pvNotUsed)
   /* See if X supports the current locale */
   if (XSupportsLocale () == False)
     {
-      ErrorF ("winClipboardProc - Locale not supported by X.  Exiting.\n");
-      pthread_exit (NULL);
+      ErrorF ("winClipboardProc - Warning: Locale not supported by X.\n");
     }
 
   /* Set jump point for Error exits */
diff --git a/hw/xwin/wincursor.c b/hw/xwin/wincursor.c
index ce98162ef..7f1935a5d 100644
--- a/hw/xwin/wincursor.c
+++ b/hw/xwin/wincursor.c
@@ -188,8 +188,7 @@ winLoadCursor (ScreenPtr pScreen, CursorPtr pCursor, int screen)
   if (pScreenPriv->cursor.sm_cx < pCursor->bits->width || 
       pScreenPriv->cursor.sm_cy < pCursor->bits->height)
     {
-      winErrorFVerb (2, "winLoadCursor - Windows requires %dx%d cursor\n"
-	      "\tbut X requires %dx%d\n",
+      winErrorFVerb (3, "winLoadCursor - Windows requires %dx%d cursor but X requires %dx%d\n",
 	      pScreenPriv->cursor.sm_cx, pScreenPriv->cursor.sm_cy,
 	      pCursor->bits->width, pCursor->bits->height);
     }
diff --git a/hw/xwin/windialogs.c b/hw/xwin/windialogs.c
index 582b865f5..a8153535f 100755
--- a/hw/xwin/windialogs.c
+++ b/hw/xwin/windialogs.c
@@ -116,8 +116,8 @@ winDrawURLWindow (LPARAM lParam)
     crText = RGB(0,0,128+64);
   SetTextColor (draw->hDC, crText);
   
-  /* Create underlined font 14 high, standard dialog font */
-  font = CreateFont (-14, 0, 0, 0, FW_NORMAL, FALSE, TRUE, FALSE,
+  /* Create font 8 high, standard dialog font */
+  font = CreateFont (-8, 0, 0, 0, FW_DONTCARE, FALSE, FALSE, FALSE,
 		     0, 0, 0, 0, 0, "MS Sans Serif");
   if (!font)
     {
@@ -705,7 +705,7 @@ winAboutDlgProc (HWND hwndDialog, UINT message,
 
 	case ID_ABOUT_WEBSITE:
 	  {
-	    const char *	pszPath = "http://x.cygwin.com/";
+	    const char *	pszPath = __VENDORDWEBSUPPORT__;
 	    int			iReturn;
 	    
 	    iReturn = ShellExecute (NULL,
diff --git a/hw/xwin/winerror.c b/hw/xwin/winerror.c
index 72ee2cfb7..9ed27c3d0 100644
--- a/hw/xwin/winerror.c
+++ b/hw/xwin/winerror.c
@@ -117,6 +117,7 @@ winMessageBoxF (const char *pszError, UINT uType, ...)
 	"Vendor: %s\n" \
 	"Release: %d.%d.%d.%d (%d)\n" \
 	"Contact: %s\n" \
+	"%s\n\n" \
 	"XWin was started with the following command-line:\n\n" \
 	"%s\n"
 
@@ -124,6 +125,7 @@ winMessageBoxF (const char *pszError, UINT uType, ...)
 	   pszErrorF, VENDOR_STRING,
 		       XORG_VERSION_MAJOR, XORG_VERSION_MINOR, XORG_VERSION_PATCH, XORG_VERSION_SNAP, XORG_VERSION_CURRENT,
 		       VENDOR_CONTACT,
+		       BUILDERSTRING,
 	   g_pszCommandLine);
   if (!pszMsgBox)
     goto winMessageBoxF_Cleanup;
diff --git a/hw/xwin/winkeybd.c b/hw/xwin/winkeybd.c
index 317f14dff..a423b499a 100644
--- a/hw/xwin/winkeybd.c
+++ b/hw/xwin/winkeybd.c
@@ -273,6 +273,10 @@ winKeybdProc (DeviceIntPtr pDeviceInt, int iState)
       
     case DEVICE_ON: 
       pDevice->on = TRUE;
+
+      // immediately copy the state of this keyboard device to the VCK
+      // (which otherwise happens lazily after the first keypress)
+      CopyKeyClass(pDeviceInt, inputInfo.keyboard);
       break;
 
     case DEVICE_CLOSE:
diff --git a/hw/xwin/winmultiwindowshape.c b/hw/xwin/winmultiwindowshape.c
index 44007027a..353235760 100644
--- a/hw/xwin/winmultiwindowshape.c
+++ b/hw/xwin/winmultiwindowshape.c
@@ -71,6 +71,9 @@ winUpdateRgnMultiWindow (WindowPtr pWin)
 {
   SetWindowRgn (winGetWindowPriv(pWin)->hWnd,
 		winGetWindowPriv(pWin)->hRgn, TRUE);
+
+  /* The system now owns the region specified by the region handle and will delete it when it is no longer needed. */
+  winGetWindowPriv(pWin)->hRgn = NULL;
 }
 
 
diff --git a/hw/xwin/winmultiwindowwindow.c b/hw/xwin/winmultiwindowwindow.c
index 8b91296f7..87ffc6d6b 100644
--- a/hw/xwin/winmultiwindowwindow.c
+++ b/hw/xwin/winmultiwindowwindow.c
@@ -515,6 +515,13 @@ winCreateWindowsWindow (WindowPtr pWin)
   iWidth = pWin->drawable.width;
   iHeight = pWin->drawable.height;
 
+  /* ensure window actually ends up somewhere visible */
+  if (iX > GetSystemMetrics (SM_CXVIRTUALSCREEN))
+    iX = CW_USEDEFAULT;
+
+  if (iY > GetSystemMetrics (SM_CYVIRTUALSCREEN))
+    iY = CW_USEDEFAULT;
+
   if (winMultiWindowGetTransientFor (pWin, &pDaddy))
     {
       if (pDaddy)
diff --git a/hw/xwin/winmultiwindowwm.c b/hw/xwin/winmultiwindowwm.c
index 880ca6a1c..21d913e5e 100644
--- a/hw/xwin/winmultiwindowwm.c
+++ b/hw/xwin/winmultiwindowwm.c
@@ -153,7 +153,7 @@ static Bool
 InitQueue (WMMsgQueuePtr pQueue);
 
 static void
-GetWindowName (Display * pDpy, Window iWin, char **ppName);
+GetWindowName (Display * pDpy, Window iWin, wchar_t **ppName);
 
 static int
 SendXMessage (Display *pDisplay, Window iWin, Atom atmType, long nData);
@@ -191,7 +191,7 @@ PreserveWin32Stack(WMInfoPtr pWMInfo, Window iWindow, UINT direction);
 #endif
 
 static Bool
-CheckAnotherWindowManager (Display *pDisplay, DWORD dwScreen);
+CheckAnotherWindowManager (Display *pDisplay, DWORD dwScreen, Bool fAllowOtherWM);
 
 static void
 winApplyHints (Display *pDisplay, Window iWindow, HWND hWnd, HWND *zstyle);
@@ -416,10 +416,12 @@ InitQueue (WMMsgQueuePtr pQueue)
  */
 
 static void
-GetWindowName (Display *pDisplay, Window iWin, char **ppName)
+GetWindowName (Display *pDisplay, Window iWin, wchar_t **ppName)
 {
   int			nResult, nNum;
   char			**ppList;
+  char			*pszReturnData;
+  int			iLen, i;
   XTextProperty		xtpName;
   
 #if CYGMULTIWINDOW_DEBUG
@@ -438,38 +440,26 @@ GetWindowName (Display *pDisplay, Window iWin, char **ppName)
 #endif
       return;
     }
-  
-  /* */
-  if (xtpName.encoding == XA_STRING)
-    {
-      /* */
-      if (xtpName.value)
-	{
-	  int size = xtpName.nitems * (xtpName.format >> 3);
-	  *ppName = malloc(size + 1);
-	  strncpy(*ppName, xtpName.value, size);
-	  (*ppName)[size] = 0;
-	  XFree (xtpName.value);
-	}
-
-#if CYGMULTIWINDOW_DEBUG
-      ErrorF ("GetWindowName - XA_STRING %s\n", *ppName);
-#endif
-    }
-  else
-    {
-      if (XmbTextPropertyToTextList (pDisplay, &xtpName, &ppList, &nNum) >= Success && nNum > 0 && *ppList)
-	{
-	  *ppName = strdup (*ppList);
-	  XFreeStringList (ppList);
-	}
-      XFree (xtpName.value);
 
-#if CYGMULTIWINDOW_DEBUG
-      ErrorF ("GetWindowName - %s %s\n",
-	      XGetAtomName (pDisplay, xtpName.encoding), *ppName);
-#endif
-    }
+   if (Xutf8TextPropertyToTextList (pDisplay, &xtpName, &ppList, &nNum) >= Success && nNum > 0 && *ppList)
+   {
+ 	iLen = 0;
+ 	for (i = 0; i < nNum; i++) iLen += strlen(ppList[i]);
+ 	pszReturnData = (char *) malloc (iLen + 1);
+ 	pszReturnData[0] = '\0';
+ 	for (i = 0; i < nNum; i++) strcat (pszReturnData, ppList[i]);
+ 	if (ppList) XFreeStringList (ppList);
+   }
+   else
+   {
+ 	pszReturnData = (char *) malloc (1);
+ 	pszReturnData[0] = '\0';
+   }
+   iLen = MultiByteToWideChar (CP_UTF8, 0, pszReturnData, -1, NULL, 0);
+   *ppName = (wchar_t*)malloc(sizeof(wchar_t)*(iLen + 1));
+   MultiByteToWideChar (CP_UTF8, 0, pszReturnData, -1, *ppName, iLen);
+   XFree (xtpName.value);
+   free (pszReturnData);
 
 #if CYGMULTIWINDOW_DEBUG
   ErrorF ("GetWindowName - Returning\n");
@@ -506,7 +496,7 @@ SendXMessage (Display *pDisplay, Window iWin, Atom atmType, long nData)
 static void
 UpdateName (WMInfoPtr pWMInfo, Window iWindow)
 {
-  char			*pszName;
+  wchar_t		*pszName;
   Atom			atmType;
   int			fmtRet;
   unsigned long		items, remain;
@@ -550,7 +540,7 @@ UpdateName (WMInfoPtr pWMInfo, Window iWindow)
 			    &attr);
       if (!attr.override_redirect)
 	{
-	  SetWindowText (hWnd, pszName);
+	  SetWindowTextW (hWnd, pszName);
 	  winUpdateIcon (iWindow);
 	}
 
@@ -903,9 +893,7 @@ winMultiWindowXMsgProc (void *pArg)
   /* See if X supports the current locale */
   if (XSupportsLocale () == False)
     {
-      ErrorF ("winMultiWindowXMsgProc - Locale not supported by X.  "
-	      "Exiting.\n");
-      pthread_exit (NULL);
+      ErrorF ("winMultiWindowXMsgProc - Warning: locale not supported by X\n");
     }
 
   /* Release the server started mutex */
@@ -979,7 +967,7 @@ winMultiWindowXMsgProc (void *pArg)
 	  "successfully opened the display.\n");
 
   /* Check if another window manager is already running */
-  g_fAnotherWMRunning = CheckAnotherWindowManager (pProcArg->pDisplay, pProcArg->dwScreen);
+  g_fAnotherWMRunning = CheckAnotherWindowManager (pProcArg->pDisplay, pProcArg->dwScreen, pProcArg->pWMInfo->fAllowOtherWM);
 
   if (g_fAnotherWMRunning && !pProcArg->pWMInfo->fAllowOtherWM)
     {
@@ -1030,7 +1018,7 @@ winMultiWindowXMsgProc (void *pArg)
 
       if (pProcArg->pWMInfo->fAllowOtherWM && !XPending (pProcArg->pDisplay))
 	{
-	  if (CheckAnotherWindowManager (pProcArg->pDisplay, pProcArg->dwScreen))
+	  if (CheckAnotherWindowManager (pProcArg->pDisplay, pProcArg->dwScreen, TRUE))
 	    {
 	      if (!g_fAnotherWMRunning)
 		{
@@ -1288,8 +1276,7 @@ winInitMultiWindowWM (WMInfoPtr pWMInfo, WMProcArgPtr pProcArg)
   /* See if X supports the current locale */
   if (XSupportsLocale () == False)
     {
-      ErrorF ("winInitMultiWindowWM - Locale not supported by X.  Exiting.\n");
-      pthread_exit (NULL);
+      ErrorF ("winInitMultiWindowWM - Warning: Locale not supported by X.\n");
     }
 
   /* Release the server started mutex */
@@ -1509,7 +1496,7 @@ winRedirectErrorHandler (Display *pDisplay, XErrorEvent *pErr)
  */
 
 static Bool
-CheckAnotherWindowManager (Display *pDisplay, DWORD dwScreen)
+CheckAnotherWindowManager (Display *pDisplay, DWORD dwScreen, Bool fAllowOtherWM)
 {
   /*
     Try to select the events which only one client at a time is allowed to select.
@@ -1524,8 +1511,12 @@ CheckAnotherWindowManager (Display *pDisplay, DWORD dwScreen)
 
   /*
     Side effect: select the events we are actually interested in...
+
+    If other WMs are not allowed, also select one of the events which only one client
+    at a time is allowed to select, so other window managers won't start...
   */
-  XSelectInput(pDisplay, RootWindow (pDisplay, dwScreen), SubstructureNotifyMask);
+  XSelectInput(pDisplay, RootWindow (pDisplay, dwScreen),
+               SubstructureNotifyMask | ( !fAllowOtherWM ? ButtonPressMask : 0));
   XSync (pDisplay, 0);
   return redirectError;
 }
@@ -1546,6 +1537,7 @@ winDeinitMultiWindowWM (void)
 #define HINT_BORDER	(1L<<1)
 #define HINT_SIZEBOX	(1l<<2)
 #define HINT_CAPTION	(1l<<3)
+#define HINT_NOMAXIMIZE (1L<<4)
 /* These two are used on their own */
 #define HINT_MAX	(1L<<0)
 #define HINT_MIN	(1L<<1)
@@ -1627,7 +1619,32 @@ winApplyHints (Display *pDisplay, Window iWindow, HWND hWnd, HWND *zstyle)
     if (pAtom) XFree(pAtom);
   }
 
-  /* Apply Styles, overriding hint settings from above */
+  {
+    XSizeHints *normal_hint = XAllocSizeHints();
+    long supplied;
+    if (normal_hint && (XGetWMNormalHints(pDisplay, iWindow, normal_hint, &supplied) == Success))
+      {
+        if (normal_hint->flags & PMaxSize)
+          {
+            /* Not maximizable if a maximum size is specified */
+            hint |= HINT_NOMAXIMIZE;
+
+            if (normal_hint->flags & PMinSize)
+              {
+                /*
+                  If both minimum size and maximum size are specified and are the same,
+                  don't bother with a resizing frame
+                */
+                if ((normal_hint->min_width == normal_hint->max_width)
+                    && (normal_hint->min_height == normal_hint->max_height))
+                  hint = (hint & ~HINT_SIZEBOX);
+              }
+          }
+      }
+    XFree(normal_hint);
+  }
+
+  /* Override hint settings from above with settings from config file */
   style = winOverrideStyle((unsigned long)pWin);
   if (style & STYLE_TOPMOST) *zstyle = HWND_TOPMOST;
   else if (style & STYLE_MAXIMIZE) maxmin = (hint & ~HINT_MIN) | HINT_MAX;
@@ -1644,14 +1661,21 @@ winApplyHints (Display *pDisplay, Window iWindow, HWND hWnd, HWND *zstyle)
   else if (style & STYLE_NOFRAME)
 	hint = (hint & ~HINT_BORDER & ~HINT_CAPTION & ~HINT_SIZEBOX) | HINT_NOFRAME;
 
+  /* Now apply styles to window */
   style = GetWindowLongPtr(hWnd, GWL_STYLE) & ~WS_CAPTION & ~WS_SIZEBOX; /* Just in case */
   if (!style) return;
-  if (!hint) /* All on, but no resize of children is allowed */
-    style = style | WS_CAPTION | (GetParent(hWnd) ? 0 : WS_SIZEBOX);
-  else if (hint & HINT_NOFRAME); /* All off, so do nothing */
+
+  if (!hint) /* All on */
+    style = style | WS_CAPTION | WS_SIZEBOX;
+  else if (hint & HINT_NOFRAME) /* All off */
+    style = style & ~WS_CAPTION & ~WS_SIZEBOX;
   else style = style | ((hint & HINT_BORDER) ? WS_BORDER : 0) |
-		((hint & HINT_SIZEBOX) ? (GetParent(hWnd) ? 0 : WS_SIZEBOX) : 0) |
+		((hint & HINT_SIZEBOX) ? WS_SIZEBOX : 0) |
 		((hint & HINT_CAPTION) ? WS_CAPTION : 0);
+
+  if (hint & HINT_NOMAXIMIZE)
+    style = style & ~WS_MAXIMIZEBOX;
+
   SetWindowLongPtr (hWnd, GWL_STYLE, style);
 }
 
diff --git a/hw/xwin/winprefs.c b/hw/xwin/winprefs.c
index d5bceb928..93901cac7 100644
--- a/hw/xwin/winprefs.c
+++ b/hw/xwin/winprefs.c
@@ -723,7 +723,7 @@ winIconIsOverride(unsigned hiconIn)
 
 
 /*
- * Try and open ~/.XWinrc and /usr/X11R6/lib/X11/system.XWinrc
+ * Try and open ~/.XWinrc and system.XWinrc
  * Load it into prefs structure for use by other functions
  */
 void
@@ -763,7 +763,7 @@ LoadPreferences (void)
 #ifdef RELOCATE_PROJECTROOT
       snprintf(buffer, sizeof(buffer), "%s\\system.XWinrc", winGetBaseDir());
 #else
-      strncpy(buffer, PROJECTROOT"/lib/X11/system.XWinrc", sizeof(buffer));
+      strncpy(buffer, SYSCONFDIR"/X11/system.XWinrc", sizeof(buffer));
 #endif
       buffer[sizeof(buffer)-1] = 0;
       prefFile = fopen (buffer, "r");
diff --git a/hw/xwin/winprefslex.l b/hw/xwin/winprefslex.l
index 9a384a2cd..463dff4ca 100644
--- a/hw/xwin/winprefslex.l
+++ b/hw/xwin/winprefslex.l
@@ -88,7 +88,7 @@ ATSTART                 { return ATSTART; }
 ATEND                   { return ATEND; }
 EXEC                    { return EXEC; }
 ALWAYSONTOP             { return ALWAYSONTOP; }
-DEBUG                   { return DEBUG; }
+DEBUG                   { return DEBUGOUTPUT; }
 RELOAD                  { return RELOAD; }
 TRAYICON                { return TRAYICON; }
 SILENTEXIT		{ return SILENTEXIT; }
diff --git a/hw/xwin/winprefsyacc.y b/hw/xwin/winprefsyacc.y
index 73f165915..0acf160e4 100644
--- a/hw/xwin/winprefsyacc.y
+++ b/hw/xwin/winprefsyacc.y
@@ -115,7 +115,7 @@ extern int yylex(void);
 %token ATEND
 %token EXEC
 %token ALWAYSONTOP
-%token DEBUG
+%token DEBUGOUTPUT "DEBUG"
 %token RELOAD
 %token TRAYICON
 %token FORCEEXIT
@@ -243,7 +243,7 @@ forceexit:	FORCEEXIT NEWLINE { pref.fForceExit = TRUE; }
 silentexit:	SILENTEXIT NEWLINE { pref.fSilentExit = TRUE; }
 	;
 
-debug: 	DEBUG STRING NEWLINE { ErrorF("LoadPreferences: %s\n", $2); free($2); }
+debug: 	DEBUGOUTPUT STRING NEWLINE { ErrorF("LoadPreferences: %s\n", $2); free($2); }
 	;
 
 
diff --git a/hw/xwin/winprocarg.c b/hw/xwin/winprocarg.c
index fd7719c3a..159e53333 100755
--- a/hw/xwin/winprocarg.c
+++ b/hw/xwin/winprocarg.c
@@ -1556,6 +1556,7 @@ winLogVersionInfo (void)
   ErrorF ("Welcome to the XWin X Server\n");
   ErrorF ("Vendor: %s\n", VENDOR_STRING);
   ErrorF ("Release: %d.%d.%d.%d (%d)\n", XORG_VERSION_MAJOR, XORG_VERSION_MINOR, XORG_VERSION_PATCH, XORG_VERSION_SNAP, XORG_VERSION_CURRENT);
+  ErrorF ("%s\n\n", BUILDERSTRING);
   ErrorF ("Contact: %s\n", VENDOR_CONTACT);
 }
 
diff --git a/hw/xwin/winwindow.h b/hw/xwin/winwindow.h
index 86c094334..cf2f93f0a 100644
--- a/hw/xwin/winwindow.h
+++ b/hw/xwin/winwindow.h
@@ -43,6 +43,7 @@
 #ifndef PROJECT_NAME
 #  define PROJECT_NAME		"Cygwin/X"
 #endif
+#define EXECUTABLE_NAME         "XWin"
 #define WINDOW_CLASS		"cygwin/x"
 #define WINDOW_TITLE		PROJECT_NAME ":%s.%d"
 #define WINDOW_TITLE_XDMCP	"%s:%s.%d"