diff options
Diffstat (limited to 'hw/xfree86/os-support/bus/zx1PCI.c')
| -rw-r--r-- | hw/xfree86/os-support/bus/zx1PCI.c | 1140 |
1 files changed, 0 insertions, 1140 deletions
diff --git a/hw/xfree86/os-support/bus/zx1PCI.c b/hw/xfree86/os-support/bus/zx1PCI.c deleted file mode 100644 index d78e0c434..000000000 --- a/hw/xfree86/os-support/bus/zx1PCI.c +++ /dev/null @@ -1,1140 +0,0 @@ -/* - * Copyright (C) 2002-2003 The XFree86 Project, Inc. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to - * deal in the Software without restriction, including without limitation the - * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Except as contained in this notice, the name of the XFree86 Project shall - * not be used in advertising or otherwise to promote the sale, use or other - * dealings in this Software without prior written authorization from the - * XFree86 Project. - */ - -/* - * This file contains the glue necessary for support of HP's ZX1 chipset. - * Keep in mind that this chipset is used in both Itanium2 and PA-RISC - * architectures. - */ - -#ifdef HAVE_XORG_CONFIG_H -#include <xorg-config.h> -#endif - -#include "zx1PCI.h" -#include "xf86.h" -#include "xf86_OSlib.h" -#include "Pci.h" - -#define MIO_BASE 0xFED00000UL /* mio register base */ -#define MIO_SIZE 0x00002000UL /* 8k, minimum */ - -/* ZX1 mio register definitions */ -#define MIO_FUNCTION0 0x0000U - -#define MODULE_INFO 0x0100U -#define STATUS_CONTROL 0x0108U -#define DILLON_PRESENT 0x02UL - -#define LMMIO_DIR_BASE0 0x0300U -#define LMMIO_DIR_MASK0 0x0308U -#define LMMIO_DIR_ROUTE0 0x0310U -#define LMMIO_DIR_BASE1 0x0318U -#define LMMIO_DIR_MASK1 0x0320U -#define LMMIO_DIR_ROUTE1 0x0328U -#define LMMIO_DIR_BASE2 0x0330U -#define LMMIO_DIR_MASK2 0x0338U -#define LMMIO_DIR_ROUTE2 0x0340U -#define LMMIO_DIR_BASE3 0x0348U -#define LMMIO_DIR_MASK3 0x0350U -#define LMMIO_DIR_ROUTE3 0x0358U -#define LMMIO_DIST_BASE 0x0360U -#define LMMIO_DIST_MASK 0x0368U -#define LMMIO_DIST_ROUTE 0x0370U -#define GMMIO_DIST_BASE 0x0378U -#define PORT_DISABLE 0x02UL -#define MAP_TO_LMMIO 0x04UL -#define GMMIO_DIST_MASK 0x0380U -#define GMMIO_DIST_ROUTE 0x0388U -#define IOS_DIST_BASE 0x0390U -#define IOS_DIST_MASK 0x0398U -#define IOS_DIST_ROUTE 0x03A0U -#define ROPE_CONFIG_BASE 0x03A8U -#define VGA_ROUTE 0x03B0U -#define VGA_ENABLE 0x8000000000000000UL -#define VGA_LIGHT 0x4000000000000000UL - -#define IOS_DIR_BASE 0x03C0U -#define IOS_DIR_MASK 0x03C8U -#define IOS_DIR_ROUTE 0x03D0U -#define IOS_BASE 0x03D8U - -#define MIO_FUNCTION1 0x1000U - -#define ROPE_CONFIG 0x1040U -#define ROPE_D0 0x0100UL -#define ROPE_D2 0x0200UL -#define ROPE_D4 0x0400UL -#define ROPE_D6 0x0800UL -#define ROPE_Q0 0x1000UL -#define ROPE_Q4 0x2000UL - -#define LBA_PORT0_CNTRL 0x1200U -#define LBA_PORT1_CNTRL 0x1208U -#define LBA_PORT2_CNTRL 0x1210U -#define LBA_PORT3_CNTRL 0x1218U -#define LBA_PORT4_CNTRL 0x1220U -#define LBA_PORT5_CNTRL 0x1228U -#define LBA_PORT6_CNTRL 0x1230U -#define LBA_PORT7_CNTRL 0x1238U -#define LBA_RESET_FUNCTION 0x0000000001UL -#define LBA_CLEAR_ERROR 0x0000000010UL -#define LBA_HARD_FAIL 0x0000000040UL -#define LBA_RESET_COMPLETE 0x0100000000UL -#define LBA_RESET_TIMEOUT 0x0200000000UL - -#define ROPE_PAGE_CONTROL 0x1418U - -/* - * Total ioa configuration space size is actually 128k, but we only need the - * first 64k. - */ -#define IOA_SIZE 0x00010000UL - -/* ZX1 ioa register definitions */ -#define IOA_CONFIG_ADDR 0x0040U -#define IOA_CONFIG_DATA 0x0048U - -#define IOA_SECONDARY_BUS 0x0058U -#define IOA_SUBORDINATE_BUS 0x0059U - -#define IOA_CONTROL 0x0108U -#define IOA_RESET_FUNCTION 0x0000000001UL -#define IOA_FORWARD_VGA 0x0000000008UL -#define IOA_CLEAR_ERROR 0x0000000010UL -#define IOA_HARD_FAIL 0x0000000040UL -#define IOA_RESET_COMPLETE 0x0100000000UL - -#define IOA_LMMIO_BASE 0x0200U -#define IOA_LMMIO_MASK 0x0208U -#define IOA_GMMIO_BASE 0x0210U -#define IOA_GMMIO_MASK 0x0218U -#define IOA_WLMMIO_BASE 0x0220U -#define IOA_WLMMIO_MASK 0x0228U -#define IOA_WGMMIO_BASE 0x0230U -#define IOA_WGMMIO_MASK 0x0238U -#define IOA_IOS_BASE 0x0240U -#define IOA_IOS_MASK 0x0248U -#define IOA_ELMMIO_BASE 0x0250U -#define IOA_ELMMIO_MASK 0x0258U -#define IOA_EIOS_BASE 0x0260U -#define IOA_EIOS_MASK 0x0268U -#define IOA_GLOBAL_MASK 0x0270U -#define IOA_SLAVE_CONTROL 0x0278U -#define IOA_VGA_PEER_ENABLE 0x2000UL -#define IOA_MSI_BASE 0x0280U -#define IOA_MSI_MASK 0x0288U - -#define IOA_DMA_BASE 0x02B0U -#define IOA_DMA_MASK 0x02B8U - -#define IOA_ERROR_CONFIG 0x0680U -#define IOA_ERROR_PIOWRITE 0x0001UL -#define IOA_ERROR_PIOREAD 0x0002UL -#define IOA_ERROR_DMAWRITE 0x0004UL -#define IOA_ERROR_DMAREAD 0x0008UL -#define IOA_ERROR_CONFIG_MASTER 0x0010UL -#define IOA_ERROR_SMART 0x0020UL -#define IOA_ERROR_FATAL_SERR 0x0040UL -#define IOA_ERROR_ASSERT_SERR 0x0080UL -/* ? 0x0100UL */ -#define IOA_ERROR_LOOPBACK 0x0200UL -#define IOA_ERROR_CONFIG_TARGET 0x0400UL -#define IOA_ERROR_IO_MASTER 0x0800UL -#define IOA_ERROR_IO_TARGET 0x1000UL -#define IOA_ERROR_MEM_MASTER 0x2000UL -#define IOA_ERROR_MEM_TARGET 0x4000UL -#define IOA_ERROR_HF_IO_FATAL 0x8000UL - -#define RANGE_ENABLE 0x01UL /* In various base registers */ - -#define IO_MASK ((1UL << 16) - 1UL) -#define LMMIO_MASK ((1UL << 32) - 1UL) -#ifdef __ia64__ -#define GMMIO_MASK ((1UL << 44) - 1UL) -#else /* PA-RISC */ -#define GMMIO_MASK ((1UL << 40) - 1UL) -#endif - -#define PDH_START 0xFF000000UL -#define PDH_LAST 0xFFFFFFFFUL - -static CARD8 *pZX1mio = NULL, - *pZX1ioa = NULL; - -/* Per-rope data */ -static INT8 zx1_ropemap[8]; -static CARD32 zx1_pciids[8]; -static CARD64 zx1_lbacntl[8]; -static int zx1_busno[8], zx1_subno[8]; - -/* Array of Booleans for non-empty buses */ -static INT8 zx1_busnmpt[MAX_PCI_BUSES]; - -static pciBusFuncs_t zx1BusFuncs; -static int zx1_fakebus = -1; -static Bool zx1_hasvga = FALSE; - -static pointer pZX1IoRes[8], pZX1MemRes[8]; /* Rope resources */ - -/* Non-PCI configuration space access macros */ -#define MIO_BYTE(offset) \ - (*(volatile CARD8 *)(pointer)(pZX1mio + (offset))) -#define MIO_WORD(offset) \ - (*(volatile CARD16 *)(pointer)(pZX1mio + (offset))) -#define MIO_LONG(offset) \ - (*(volatile CARD32 *)(pointer)(pZX1mio + (offset))) -#define MIO_QUAD(offset) \ - (*(volatile CARD64 *)(pointer)(pZX1mio + (offset))) -#define IOA_BYTE(ioa, offset) \ - (*(volatile CARD8 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13)))) -#define IOA_WORD(ioa, offset) \ - (*(volatile CARD16 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13)))) -#define IOA_LONG(ioa, offset) \ - (*(volatile CARD32 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13)))) -#define IOA_QUAD(ioa, offset) \ - (*(volatile CARD64 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13)))) - -/* Range definitions */ -#define MAX_RANGE 16 -static CARD64 bot[MAX_RANGE], top[MAX_RANGE], msk[MAX_RANGE], siz[MAX_RANGE]; -static INT8 *pDecode[MAX_RANGE]; -static int nRange = 0; - -/* Track a resource range and assign a granularity to it */ -static void -SetRange(CARD64 base, CARD64 last, CARD8 width) -{ - int i; - - bot[nRange] = base; - top[nRange] = last; - msk[nRange] = (CARD64)(-1L); - if (base) - msk[nRange] &= (base ^ (base - 1UL)) >> 1; - if (last + 1UL) - msk[nRange] &= (last ^ (last + 1UL)) >> 1; - if (width < 64) - msk[nRange] &= (1UL << width) - 1UL; - - /* Look for overlapping ranges */ - for (i = 0; i < nRange; i++) { - if ((bot[i] > top[i]) || - (top[nRange] < bot[i]) || - (top[i] < bot[nRange])) - continue; - - /* Merge in overlapping range */ - if (bot[nRange] > bot[i]) - bot[nRange] = bot[i]; - if (top[nRange] < top[i]) - top[nRange] = top[i]; - - /* Assign finer granularity */ - msk[nRange] &= msk[i]; - bot[i] = 1UL; - top[i] = 0; - } - - nRange++; -} - -/* Lookup granularity associated with the range containing 'base' */ -static int -GetRange(CARD64 base) -{ - int i; - - for (i = 0; i < nRange; i++) { - if ((bot[i] > top[i]) || - (base < bot[i]) || - (base > top[i])) - continue; - - if (pDecode[i]) - break; - - /* Allocate decoding array */ - msk[i]++; - siz[i] = ((top[i] - bot[i] + 1UL) / msk[i]) + 1UL; - pDecode[i] = xnfalloc(siz[i]); - (void)memset(pDecode[i], -1, siz[i]); - break; - } - - return i; -} - -/* - * Verify that 'bus' is a rope's secondary bus and return the pciConfigPtr of - * the associated fake PCI-to-PCI bridge. - */ -static pciConfigPtr -VerifyZX1Bus(int bus) -{ - pciConfigPtr pPCI; - - if ((bus < 0) || (bus >= pciNumBuses) || - !pciBusInfo[bus] || !(pPCI = pciBusInfo[bus]->bridge) || - (pPCI->busnum != zx1_fakebus) || (pPCI->funcnum != 0) || - (pPCI->devnum < 0x10) || (pPCI->devnum > 0x17)) - return NULL; - - return pPCI; -} - -/* - * This function is called to emulate the various settings in a P2P or CardBus - * bridge's control register on a ZX1-based system. - */ -static CARD16 -ControlZX1Bridge(int bus, CARD16 mask, CARD16 value) -{ - pciConfigPtr pPCI; - CARD64 tmp1, tmp2, tmp3, ropenum; - CARD16 current = 0; - - if ((pPCI = VerifyZX1Bus(bus))) { - ropenum = pPCI->devnum & 0x07; - - /* - * Start with VGA enablement. This preserves the "VGA-lite" bit - * in mio's VGA_ROUTE register, and the VPE bit in each ioa's - * SLAVE_CONTROL register. - */ - tmp1 = MIO_QUAD(VGA_ROUTE); - tmp2 = IOA_QUAD(ropenum, IOA_CONTROL) & - ~(IOA_RESET_FUNCTION | IOA_CLEAR_ERROR); - if ((tmp1 & VGA_ENABLE) && ((tmp1 & 0x07UL) == ropenum)) { - current |= PCI_PCI_BRIDGE_VGA_EN; - if ((mask & PCI_PCI_BRIDGE_VGA_EN) && - !(value & PCI_PCI_BRIDGE_VGA_EN)) { - MIO_QUAD(VGA_ROUTE) = tmp1 & ~VGA_ENABLE; - tmp2 &= ~IOA_FORWARD_VGA; - IOA_QUAD(ropenum, IOA_CONTROL) = tmp2; - } - } else if (mask & value & PCI_PCI_BRIDGE_VGA_EN) { - if (!zx1_hasvga) { - xf86MsgVerb(X_WARNING, 3, - "HP ZX1: Attempt to enable VGA routing to bus %d" - " through rope %ld disallowed\n", bus, ropenum); - value &= ~PCI_PCI_BRIDGE_VGA_EN; - } else { - if (tmp1 & VGA_ENABLE) { - /* - * VGA is routed somewhere else. Disable it. - */ - MIO_QUAD(VGA_ROUTE) = 0UL; - tmp3 = IOA_QUAD(tmp1 & 0x07UL, IOA_CONTROL); - if (tmp3 & IOA_FORWARD_VGA) - IOA_QUAD(tmp1 & 0x07UL, IOA_CONTROL) = tmp3 & - ~(IOA_RESET_FUNCTION | IOA_FORWARD_VGA | - IOA_CLEAR_ERROR); - } - if (!(tmp2 & IOA_FORWARD_VGA)) { - tmp2 |= IOA_FORWARD_VGA; - IOA_QUAD(ropenum, IOA_CONTROL) = tmp2; - } - tmp1 = (tmp1 & ~0x07UL) | ropenum | VGA_ENABLE; - MIO_QUAD(VGA_ROUTE) = tmp1; - } - } - - /* Move on to master abort failure enablement */ - tmp1 = MIO_QUAD((ropenum << 3) + LBA_PORT0_CNTRL) & - ~(LBA_RESET_FUNCTION | LBA_CLEAR_ERROR); - if ((tmp1 & LBA_HARD_FAIL) || (tmp2 & IOA_HARD_FAIL)) { - current |= PCI_PCI_BRIDGE_MASTER_ABORT_EN; - if ((mask & PCI_PCI_BRIDGE_MASTER_ABORT_EN) && - !(value & PCI_PCI_BRIDGE_MASTER_ABORT_EN)) { - if (tmp1 & LBA_HARD_FAIL) - MIO_QUAD((ropenum << 3) + LBA_PORT0_CNTRL) = - tmp1 & ~LBA_HARD_FAIL; - if (tmp2 & IOA_HARD_FAIL) { - tmp2 &= ~IOA_HARD_FAIL; - IOA_QUAD(ropenum, IOA_CONTROL) = tmp2; - } - } - } else { - if (mask & value & PCI_PCI_BRIDGE_MASTER_ABORT_EN) { - if (!(tmp1 & LBA_HARD_FAIL)) - MIO_QUAD((ropenum << 3) + LBA_PORT0_CNTRL) = - tmp1 | LBA_HARD_FAIL; - if (!(tmp2 & IOA_HARD_FAIL)) { - tmp2 |= IOA_HARD_FAIL; - IOA_QUAD(ropenum, IOA_CONTROL) = tmp2; - } - } - } - - /* Put emulation of any other P2P bridge control here */ - } - - return (current & ~mask) | (value & mask); -} - -/* Retrieves a list of the resources routed to a rope's secondary bus */ -static void -GetZX1BridgeResources(int bus, - pointer *ppIoRes, - pointer *ppMemRes, - pointer *ppPmemRes) -{ - pciConfigPtr pPCI = VerifyZX1Bus(bus); - - if (ppIoRes) { - xf86FreeResList(*ppIoRes); - *ppIoRes = - pPCI ? xf86DupResList(pZX1IoRes[pPCI->devnum & 0x07]) : NULL; - } - - if (ppMemRes) { - xf86FreeResList(*ppMemRes); - *ppMemRes = - pPCI ? xf86DupResList(pZX1MemRes[pPCI->devnum & 0x07]) : NULL; - } - - if (ppPmemRes) { - xf86FreeResList(*ppPmemRes); - *ppPmemRes = NULL; - } -} - -/* The fake bus */ -static CARD32 -zx1FakeReadLong(PCITAG tag, int offset) -{ - FatalError("zx1FakeReadLong(0x%lX, 0x%X) called\n", - (unsigned long)tag, offset); -} - -static void -zx1FakeWriteLong(PCITAG tag, int offset, CARD32 val) -{ - FatalError("zx1FakeWriteLong(0x%lX, 0x%X, 0x%08X) called\n", - (unsigned long)tag, offset, val); -} - -static void -zx1FakeSetBits(PCITAG tag, int offset, CARD32 mask, CARD32 bits) -{ - CARD32 val; - - val = zx1FakeReadLong(tag, offset); - val &= ~mask; - val |= bits; - zx1FakeWriteLong(tag, offset, val); -} - -static pciBusFuncs_t zx1FakeBusFuncs = { - zx1FakeReadLong, - zx1FakeWriteLong, - zx1FakeSetBits -}; - -static pciBusInfo_t zx1FakeBus = { - 0, /* configMech -- copied from bus 0 */ - 0, /* numDevices -- copied from bus 0 */ - FALSE, /* secondary */ - 0, /* primary_bus -- dynamically set */ - &zx1FakeBusFuncs, /* funcs */ - NULL, /* pciBusPriv -- none */ - NULL, /* bridge -- dynamically set */ -}; - -void -xf86PreScanZX1(void) -{ - resRange range; - unsigned long mapSize = getpagesize(); - unsigned long tmp, base, ioaaddr; - unsigned long flagsd, based, lastd, maskd, routed; - unsigned long flags0, base0, last0, mask0, route0; - unsigned long flags1, base1, last1, mask1, route1; - unsigned long flags2, base2, last2, mask2, route2; - unsigned long flags3, base3, last3, mask3, route3; - unsigned long flagsg, baseg, lastg, maskg, routeg; - unsigned long flagsl, basel, lastl; - int i, rope; - - /* Map mio registers (minimum 8k) */ - if (mapSize < MIO_SIZE) - mapSize = MIO_SIZE; - - if (!(pZX1mio = xf86MapVidMem(-1, VIDMEM_MMIO, MIO_BASE, mapSize))) - return; - - /* Look for ZX1's SBA and IOC */ - if (((MIO_LONG(MIO_FUNCTION0 + PCI_ID_REG) != - DEVID(VENDOR_HP, CHIP_ZX1_SBA)) || - (MIO_LONG(MIO_FUNCTION1 + PCI_ID_REG) != - DEVID(VENDOR_HP, CHIP_ZX1_IOC))) && - ((MIO_LONG(MIO_FUNCTION0 + PCI_ID_REG) != - DEVID(VENDOR_HP, CHIP_ZX2_SBA)) || - (MIO_LONG(MIO_FUNCTION1 + PCI_ID_REG) != - DEVID(VENDOR_HP, CHIP_ZX2_IOC)))) { - xf86UnMapVidMem(-1, pZX1mio, mapSize); - pZX1mio = NULL; - return; - } - - /* Map rope configuration space */ - ioaaddr = MIO_QUAD(ROPE_CONFIG_BASE); - if (!(ioaaddr & RANGE_ENABLE) || /* No ropes */ - ((ioaaddr = ioaaddr & ~RANGE_ENABLE) & 0x01FFFFUL) || /* Not aligned */ - !(pZX1ioa = xf86MapVidMem(-1, VIDMEM_MMIO, ioaaddr, IOA_SIZE))) { - xf86UnMapVidMem(-1, pZX1mio, mapSize); - pZX1mio = NULL; - return; - } - - for (i = 0; i < 8; i++) { - zx1_ropemap[i] = i; - zx1_lbacntl[i] = 0; - xf86FreeResList(pZX1IoRes[i]); - xf86FreeResList(pZX1MemRes[i]); - pZX1IoRes[i] = pZX1MemRes[i] = NULL; - } - - /* - * Determine which of 8 possible ropes exist in the system. This is done - * by looking at their "coupling" to generate a list of candidates, - * whittling this list down by factoring in ROPE_PAGE_CONTROL register - * contents, then poking each candidate's configuration space to determine - * its existence. - */ - tmp = MIO_QUAD(ROPE_CONFIG); - if (tmp & ROPE_D0) - zx1_ropemap[1] = 0; - if (tmp & ROPE_D2) - zx1_ropemap[3] = 2; - if (tmp & ROPE_D4) - zx1_ropemap[5] = 4; - if (tmp & ROPE_D6) - zx1_ropemap[7] = 6; - if (tmp & ROPE_Q0) - zx1_ropemap[1] = zx1_ropemap[2] = zx1_ropemap[3] = 0; - if (tmp & ROPE_Q4) - zx1_ropemap[5] = zx1_ropemap[6] = zx1_ropemap[7] = 4; - - /* - * zx2 should allow better probing support via hard-fails, so no need to - * use the ROPE_PAGE_CONTROL register. Also, zx2 always has ropes 3 & 7 - * active regardless of bundling. - */ - if (MIO_LONG(MIO_FUNCTION0 + PCI_ID_REG) != - DEVID(VENDOR_HP, CHIP_ZX2_SBA)) { - - tmp = MIO_QUAD(ROPE_PAGE_CONTROL); - for (i = 0; i < 8; i++, tmp >>= 8) - if (!(CARD8)tmp) - zx1_ropemap[i] = -1; - } else { - zx1_ropemap[3] = 3; - zx1_ropemap[7] = 7; - } - - for (i = 0; i < 8; ) { - if (zx1_ropemap[i] == i) { - - /* Prevent hard-fails */ - zx1_lbacntl[i] = MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) & - ~(LBA_RESET_FUNCTION | LBA_CLEAR_ERROR); - - if (zx1_lbacntl[i] & LBA_RESET_TIMEOUT) { - /* Ignore this rope and its couplings */ - do { - zx1_ropemap[i++] = -1; - } while ((i < 8) && (zx1_ropemap[i] < i)); - continue; /* Avoid over-incrementing 'i' */ - } - - if (zx1_lbacntl[i] & LBA_HARD_FAIL) - MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) = - zx1_lbacntl[i] & ~LBA_HARD_FAIL; - - /* Poke for an ioa */ - zx1_pciids[i] = IOA_LONG(i, PCI_ID_REG); - switch (zx1_pciids[i]) { - case DEVID(VENDOR_HP, CHIP_ELROY): - case DEVID(VENDOR_HP, CHIP_ZX1_LBA): /* Mercury */ - case DEVID(VENDOR_HP, CHIP_ZX1_AGP8): /* QuickSilver */ - case DEVID(VENDOR_HP, CHIP_ZX2_LBA): - case DEVID(VENDOR_HP, CHIP_ZX2_PCIE): - /* Expected vendor/device IDs */ - zx1_busno[i] = - (unsigned int)IOA_BYTE(i, IOA_SECONDARY_BUS); - zx1_subno[i] = - (unsigned int)IOA_BYTE(i, IOA_SUBORDINATE_BUS); - break; - - default: - if ((CARD16)(zx1_pciids[i] + 1U) > (CARD16)1U) - xf86MsgVerb(X_NOTICE, 0, - "HP ZX1: Unexpected vendor/device id 0x%08X" - " on rope %d\n", zx1_pciids[i], i); - /* Nobody home, or not the "right" kind of rope guest */ - - /* - * Restore hard-fail setting. For "active" ropes, this is done - * later. - */ - if (zx1_lbacntl[i] & LBA_HARD_FAIL) { - MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) = zx1_lbacntl[i]; - zx1_lbacntl[i] = 0; - } - - /* Ignore this rope and its couplings */ - do { - zx1_ropemap[i++] = -1; - } while ((i < 8) && (zx1_ropemap[i] < i)); - continue; /* Avoid over-incrementing 'i' */ - } - } - i++; - } - - /* Determine if VGA is currently routed */ - tmp = MIO_QUAD(VGA_ROUTE); - if (tmp & VGA_ENABLE) - zx1_hasvga = TRUE; - - /* - * Decode mio resource "coarse" routing (i.e. ignoring VGA). Due to the - * rather unusual flexibility of this chipset, this is done in a number of - * stages. For each of I/O and memory, first decode the relevant registers - * to generate ranges with an associated granularity. Overlapping ranges - * are merged into a larger range with the finer granularity. Each - * original range is then more thoroughly decoded using the granularity - * associated with the merged range that contains it. The result is then - * converted into resource lists for the common layer. - * - * Note that this doesn't care whether or not read-only bits are actually - * set as documented, nor that mask bits are contiguous. This does, - * however, factor in upper limits on I/O, LMMIO anf GMMIO addresses, and - * thus assumes high-order address bits are ignored rather than decoded. - * For example, an I/O address of 0x76543210 will be treated as 0x3210 - * rather than considered out-of-range. In part, this handling is a - * consequence of the fact that high-order mask bits are zeroes instead of - * ones. - */ - - flagsd = 0; based = 0; lastd = 0; maskd = 0; routed = 0; - flags0 = 0; base0 = 0; last0 = 0; mask0 = 0; route0 = 0; - flags1 = 0; base1 = 0; last1 = 0; mask1 = 0; route1 = 0; - flags2 = 0; base2 = 0; last2 = 0; mask2 = 0; route2 = 0; - flags3 = 0; base3 = 0; last3 = 0; mask3 = 0; route3 = 0; - flagsg = 0; baseg = 0; lastg = 0; maskg = 0; routeg = 0; - flagsl = 0; basel = 0; lastl = 0; - - if ((tmp = MIO_QUAD(IOS_DIST_BASE)) & RANGE_ENABLE) { - flagsd = RANGE_ENABLE; - maskd = MIO_QUAD(IOS_DIST_MASK); - based = tmp & maskd & (~RANGE_ENABLE & IO_MASK); - lastd = based | (~maskd & IO_MASK); - routed = MIO_QUAD(IOS_DIST_ROUTE) >> 58; - SetRange(based, lastd, routed); - } - - if ((tmp = MIO_QUAD(IOS_DIR_BASE)) & RANGE_ENABLE) { - flags0 = RANGE_ENABLE; - mask0 = MIO_QUAD(IOS_DIR_MASK); - base0 = tmp & mask0 & (~RANGE_ENABLE & IO_MASK); - last0 = base0 | (~mask0 & IO_MASK); - route0 = MIO_QUAD(IOS_DIR_ROUTE) & 0x07U; - SetRange(base0, last0, 64); - } - - if (flagsd) { - i = GetRange(based); - for (tmp = based; tmp <= lastd; tmp += msk[i]) { - if ((tmp & maskd) == based) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[(tmp >> routed) & 0x07U]; - } - } - - flagsd = 0; - } - - if (flags0) { - i = GetRange(base0); - for (tmp = base0; tmp <= last0; tmp += msk[i]) { - if ((tmp & mask0) == base0) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[route0]; - } - } - - flags0 = 0; - } - - for (i = 0; i < nRange; i++) { - if (!pDecode[i]) - continue; - - rope = pDecode[i][0]; - for (base = tmp = 0; ++tmp < siz[i]; ) { - if (rope == pDecode[i][tmp]) - continue; - - if (rope >= 0) { - RANGE(range, (base * msk[i]) + bot[i], - (tmp * msk[i]) + bot[i] - 1UL, - RANGE_TYPE(ResExcIoBlock, 0)); - pZX1IoRes[rope] = - xf86AddResToList(pZX1IoRes[rope], &range, -1); - } - - base = tmp; - rope = pDecode[i][base]; - } - - xfree(pDecode[i]); - pDecode[i] = NULL; - } - - nRange = 0; - - /* - * Move on to CPU memory access decoding. For now, don't tell the common - * layer about CPU memory ranges that are either relocated to 0 or - * translated into PCI I/O. - */ - - SetRange(MIO_BASE, MIO_BASE + MIO_SIZE - 1UL, 64); /* mio */ - SetRange(ioaaddr, ioaaddr + ((IOA_SIZE << 1) - 1UL), 64); /* ioa */ - SetRange(PDH_START, PDH_LAST, 64); /* PDH */ - - SetRange(MIO_BASE, LMMIO_MASK, 64); /* Completeness */ - - if ((tmp = MIO_QUAD(LMMIO_DIST_BASE)) & RANGE_ENABLE) { - flagsd = RANGE_ENABLE; - maskd = MIO_QUAD(LMMIO_DIST_MASK); - based = tmp & maskd & (~RANGE_ENABLE & LMMIO_MASK); - lastd = based | (~maskd & LMMIO_MASK); - routed = MIO_QUAD(LMMIO_DIST_ROUTE) >> 58; - SetRange(based, lastd, routed); - } - - if ((tmp = MIO_QUAD(LMMIO_DIR_BASE0)) & RANGE_ENABLE) { - flags0 = RANGE_ENABLE; - mask0 = MIO_QUAD(LMMIO_DIR_MASK0); - base0 = tmp & mask0 & (~RANGE_ENABLE & LMMIO_MASK); - last0 = base0 | (~mask0 & LMMIO_MASK); - route0 = MIO_QUAD(LMMIO_DIR_ROUTE0) & 0x07U; - SetRange(base0, last0, 64); - } - - if ((tmp = MIO_QUAD(LMMIO_DIR_BASE1)) & RANGE_ENABLE) { - flags1 = RANGE_ENABLE; - mask1 = MIO_QUAD(LMMIO_DIR_MASK1); - base1 = tmp & mask1 & (~RANGE_ENABLE & LMMIO_MASK); - last1 = base1 | (~mask1 & LMMIO_MASK); - route1 = MIO_QUAD(LMMIO_DIR_ROUTE1) & 0x07U; - SetRange(base1, last1, 64); - } - - if ((tmp = MIO_QUAD(LMMIO_DIR_BASE2)) & RANGE_ENABLE) { - flags2 = RANGE_ENABLE; - mask2 = MIO_QUAD(LMMIO_DIR_MASK2); - base2 = tmp & mask2 & (~RANGE_ENABLE & LMMIO_MASK); - last2 = base2 | (~mask2 & LMMIO_MASK); - route2 = MIO_QUAD(LMMIO_DIR_ROUTE2) & 0x07U; - SetRange(base2, last2, 64); - } - - if ((tmp = MIO_QUAD(LMMIO_DIR_BASE3)) & RANGE_ENABLE) { - flags3 = RANGE_ENABLE; - mask3 = MIO_QUAD(LMMIO_DIR_MASK3); - base3 = tmp & mask3 & (~RANGE_ENABLE & LMMIO_MASK); - last3 = base3 | (~mask3 & LMMIO_MASK); - route3 = MIO_QUAD(LMMIO_DIR_ROUTE3) & 0x07U; - SetRange(base3, last3, 64); - } - - if ((tmp = MIO_QUAD(GMMIO_DIST_BASE)) & RANGE_ENABLE) { - flagsg = tmp & (RANGE_ENABLE | PORT_DISABLE | MAP_TO_LMMIO); - maskg = MIO_QUAD(GMMIO_DIST_MASK); - baseg = tmp & maskg & - (~(RANGE_ENABLE | PORT_DISABLE | MAP_TO_LMMIO) & GMMIO_MASK); - lastg = baseg | (~maskg & GMMIO_MASK); - tmp = routeg = MIO_QUAD(GMMIO_DIST_ROUTE) >> 58; - if (!(flagsg & (PORT_DISABLE & MAP_TO_LMMIO)) && (tmp > 26)) - tmp = 26; - SetRange(baseg, lastg, tmp); - } - - if ((tmp = MIO_QUAD(IOS_BASE)) & RANGE_ENABLE) { - flagsl = RANGE_ENABLE; - basel = tmp & (~RANGE_ENABLE & GMMIO_MASK); - lastl = basel | 0x001FFFFFUL; - SetRange(basel, lastl, 64); - } - - if (flagsd) { - i = GetRange(based); - for (tmp = based; tmp <= lastd; tmp += msk[i]) { - if ((tmp & maskd) == based) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[(tmp >> routed) & 0x07U]; - } - } - - flagsd = 0; - } - - /* LMMIO distributed range does not address anything beyond 0xFED00000 */ - i = GetRange(MIO_BASE); - for (tmp = MIO_BASE; tmp <= LMMIO_MASK; tmp += msk[i]) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = -1; - } - - /* Dillon space can sometimes be redirected to rope 0 */ - tmp = MIO_QUAD(STATUS_CONTROL); - if (!(tmp & DILLON_PRESENT)) { - i = GetRange(PDH_START); - for (tmp = PDH_START; tmp <= PDH_LAST; tmp += msk[i]) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[0]; - } - } - - if (flagsg) { - unsigned long mask = (0x07UL << routeg) | maskg; - - i = GetRange(baseg); - for (tmp = baseg; tmp <= lastg; tmp += msk[i]) { - if ((tmp & maskg) == baseg) { - base = (tmp - bot[i]) / msk[i]; - - if ((flagsg & MAP_TO_LMMIO) || - (!(flagsg & PORT_DISABLE) && - (tmp <= ((tmp & mask) | 0x03FFFFFFUL)))) { - pDecode[i][base] = -1; - } else { - pDecode[i][base] = zx1_ropemap[(tmp >> routeg) & 0x07U]; - } - } - } - - flagsg = 0; - } - - if (flagsl) { - i = GetRange(basel); - for (tmp = basel; tmp <= lastl; tmp += msk[i]) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = -1; - } - - flagsl = 0; - } - - /* For now, assume directed LMMIO ranges don't overlap with each other */ - if (flags0) { - i = GetRange(base0); - for (tmp = base0; tmp <= last0; tmp += msk[i]) { - if ((tmp & mask0) == base0) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[route0]; - } - } - - flags0 = 0; - } - - if (flags1) { - i = GetRange(base1); - for (tmp = base1; tmp <= last1; tmp += msk[i]) { - if ((tmp & mask1) == base1) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[route1]; - } - } - - flags1 = 0; - } - - if (flags2) { - i = GetRange(base2); - for (tmp = base2; tmp <= last2; tmp += msk[i]) { - if ((tmp & mask2) == base2) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[route2]; - } - } - - flags2 = 0; - } - - if (flags3) { - i = GetRange(base3); - for (tmp = base3; tmp <= last3; tmp += msk[i]) { - if ((tmp & mask3) == base3) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = zx1_ropemap[route3]; - } - } - - flags3 = 0; - } - - /* Claim iao config area */ - i = GetRange(ioaaddr); - for (tmp = ioaaddr; tmp < ioaaddr + (IOA_SIZE << 1); tmp += msk[i]) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = -1; - } - - /* Claim mio config area */ - i = GetRange(MIO_BASE); - for (tmp = MIO_BASE; tmp < (MIO_BASE + MIO_SIZE); tmp += msk[i]) { - base = (tmp - bot[i]) / msk[i]; - pDecode[i][base] = -1; - } - - for (i = 0; i < nRange; i++) { - if (!pDecode[i]) - continue; - - rope = pDecode[i][0]; - for (base = tmp = 0; ++tmp < siz[i]; ) { - if (rope == pDecode[i][tmp]) - continue; - - if (rope >= 0) { - RANGE(range, (base * msk[i]) + bot[i], - (tmp * msk[i]) + bot[i] - 1UL, - RANGE_TYPE(ResExcMemBlock, 0)); - pZX1MemRes[rope] = - xf86AddResToList(pZX1MemRes[rope], &range, -1); - } - - base = tmp; - rope = pDecode[i][base]; - } - - xfree(pDecode[i]); - pDecode[i] = NULL; - } - - nRange = 0; - - return; -} - -/* This is called to finalise the results of a PCI bus scan */ -void -xf86PostScanZX1(void) -{ - pciConfigPtr pPCI, *ppPCI, *ppPCI2; - pciBusInfo_t *pBusInfo; - int i, idx; - - if (!pZX1mio) - return; - - (void)memset(zx1_busnmpt, FALSE, sizeof(zx1_busnmpt)); - pBusInfo = pciBusInfo[0]; - - /* - * Certain 2.4 & 2.5 Linux kernels add fake PCI devices. Remove them to - * prevent any possible interference with our PCI validation. - * - * Also, if VGA isn't routed on server entry, determine if VGA routing - * needs to be enabled while the server is running. - */ - idx = 0; - ppPCI = ppPCI2 = xf86scanpci(0); /* Recursion is only apparent */ - while ((pPCI = *ppPCI2++)) { - switch (pPCI->pci_device_vendor) { - case DEVID(VENDOR_HP, CHIP_ELROY): - case DEVID(VENDOR_HP, CHIP_ZX1_SBA): /* Pluto function 0 */ - case DEVID(VENDOR_HP, CHIP_ZX1_IOC): /* Pluto function 1 */ - case DEVID(VENDOR_HP, CHIP_ZX1_LBA): /* Mercury */ - case DEVID(VENDOR_HP, CHIP_ZX1_AGP8): /* QuickSilver */ - case DEVID(VENDOR_HP, CHIP_ZX2_SBA): - case DEVID(VENDOR_HP, CHIP_ZX2_IOC): - case DEVID(VENDOR_HP, CHIP_ZX2_LBA): - case DEVID(VENDOR_HP, CHIP_ZX2_PCIE): - xfree(pPCI); /* Remove it */ - continue; - - default: - *ppPCI++ = pPCI; - idx++; - - zx1_busnmpt[pPCI->busnum] = TRUE; - - if (zx1_hasvga) - continue; - - switch (pPCI->pci_base_class) { - case PCI_CLASS_PREHISTORIC: - if (pPCI->pci_sub_class == PCI_SUBCLASS_PREHISTORIC_VGA) - break; - continue; - - case PCI_CLASS_DISPLAY: - if (pPCI->pci_sub_class == PCI_SUBCLASS_DISPLAY_VGA) - break; - continue; - - default: - continue; - } - - zx1_hasvga = TRUE; - continue; - } - } - - /* - * Restore hard-fail settings and figure out the actual secondary and - * subordinate bus numbers. - */ - for (i = 0; i < 8; i++) { - if (zx1_ropemap[i] != i) - continue; - - if (zx1_lbacntl[i] & LBA_HARD_FAIL) - MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) = zx1_lbacntl[i]; - - while ((zx1_busno[i] < zx1_subno[i]) && !pciBusInfo[zx1_subno[i]]) - zx1_subno[i]--; - - if (zx1_fakebus <= zx1_subno[i]) - zx1_fakebus = zx1_subno[i] + 1; - - while (!zx1_busnmpt[zx1_busno[i]]) { - if (zx1_busno[i]) /* Info for bus zero is in static storage */ - xfree(pciBusInfo[zx1_busno[i]]); - pciBusInfo[zx1_busno[i]++] = NULL; - if (zx1_busno[i] > zx1_subno[i]) - break; - } - } - - if (zx1_fakebus >= pciNumBuses) { - if (zx1_fakebus >= pciMaxBusNum) - FatalError("HP ZX1: No room for fake PCI bus\n"); - pciNumBuses = zx1_fakebus + 1; - } - - /* Set up our extra bus functions */ - zx1BusFuncs = *(pBusInfo->funcs); - zx1BusFuncs.pciControlBridge = ControlZX1Bridge; - zx1BusFuncs.pciGetBridgeResources = GetZX1BridgeResources; - - /* Set up our own fake bus to act as the root segment */ - zx1FakeBus.configMech = pBusInfo->configMech; - zx1FakeBus.numDevices = pBusInfo->numDevices; - zx1FakeBus.primary_bus = zx1_fakebus; - pciBusInfo[zx1_fakebus] = &zx1FakeBus; - - /* Add the fake bus' host bridge */ - if (++idx >= MAX_PCI_DEVICES) - FatalError("HP ZX1: No room for fake Host-to-PCI bridge\n"); - *ppPCI++ = zx1FakeBus.bridge = pPCI = xnfcalloc(1, sizeof(pciDevice)); - pPCI->tag = PCI_MAKE_TAG(zx1_fakebus, 0, 0); - pPCI->busnum = zx1_fakebus; - /* pPCI->devnum = pPCI->funcnum = 0; */ - pPCI->pci_device_vendor = DEVID(VENDOR_HP, CHIP_ZX1_SBA); - pPCI->pci_base_class = PCI_CLASS_BRIDGE; - /* pPCI->pci_sub_class = PCI_SUBCLASS_BRIDGE_HOST; */ - pPCI->fakeDevice = TRUE; - -#ifdef OLD_FORMAT - xf86MsgVerb(X_INFO, 2, "PCI: BusID 0x%.2x,0x%02x,0x%1x " - "ID 0x%04x,0x%04x Rev 0x%02x Class 0x%02x,0x%02x\n", - pPCI->busnum, pPCI->devnum, pPCI->funcnum, - pPCI->pci_vendor, pPCI->_pci_device, pPCI->pci_rev_id, - pPCI->pci_base_class, pPCI->pci_sub_class); -#else - xf86MsgVerb(X_INFO, 2, "PCI: %.2x:%02x:%1x: chip %04x,%04x" - " card %04x,%04x rev %02x class %02x,%02x,%02x hdr %02x\n", - pPCI->busnum, pPCI->devnum, pPCI->funcnum, - pPCI->pci_vendor, pPCI->_pci_device, - pPCI->pci_subsys_vendor, pPCI->pci_subsys_card, - pPCI->pci_rev_id, pPCI->pci_base_class, - pPCI->pci_sub_class, pPCI->pci_prog_if, - pPCI->pci_header_type); -#endif - - /* Add a fake PCI-to-PCI bridge to represent each active rope */ - for (i = 0; i < 8; i++) { - if ((zx1_ropemap[i] != i) || (zx1_busno[i] > zx1_subno[i]) || - !(pBusInfo = pciBusInfo[zx1_busno[i]])) - continue; - - if (++idx >= MAX_PCI_DEVICES) - FatalError("HP ZX1: No room for fake PCI-to-PCI bridge\n"); - *ppPCI++ = pPCI = xnfcalloc(1, sizeof(pciDevice)); - pPCI->busnum = zx1_fakebus; - pPCI->devnum = i | 0x10; - /* pPCI->funcnum = 0; */ - pPCI->tag = PCI_MAKE_TAG(zx1_fakebus, pPCI->devnum, 0); - pPCI->pci_device_vendor = zx1_pciids[i]; - pPCI->pci_base_class = PCI_CLASS_BRIDGE; - pPCI->pci_sub_class = PCI_SUBCLASS_BRIDGE_PCI; - pPCI->pci_header_type = 1; - pPCI->pci_primary_bus_number = zx1_fakebus; - pPCI->pci_secondary_bus_number = zx1_busno[i]; - pPCI->pci_subordinate_bus_number = zx1_subno[i]; - pPCI->fakeDevice = TRUE; - - pBusInfo->bridge = pPCI; - pBusInfo->secondary = TRUE; - pBusInfo->primary_bus = zx1_fakebus; - - /* Plug in chipset routines */ - pBusInfo->funcs = &zx1BusFuncs; - - /* Set bridge control register for scanpci utility */ - pPCI->pci_bridge_control = ControlZX1Bridge(zx1_busno[i], 0, 0); - -#ifdef OLD_FORMAT - xf86MsgVerb(X_INFO, 2, "PCI: BusID 0x%.2x,0x%02x,0x%1x " - "ID 0x%04x,0x%04x Rev 0x%02x Class 0x%02x,0x%02x\n", - pPCI->busnum, pPCI->devnum, pPCI->funcnum, - pPCI->pci_vendor, pPCI->_pci_device, pPCI->pci_rev_id, - pPCI->pci_base_class, pPCI->pci_sub_class); -#else - xf86MsgVerb(X_INFO, 2, "PCI: %.2x:%02x:%1x: chip %04x,%04x" - " card %04x,%04x rev %02x class %02x,%02x,%02x hdr %02x\n", - pPCI->busnum, pPCI->devnum, pPCI->funcnum, - pPCI->pci_vendor, pPCI->_pci_device, - pPCI->pci_subsys_vendor, pPCI->pci_subsys_card, - pPCI->pci_rev_id, pPCI->pci_base_class, - pPCI->pci_sub_class, pPCI->pci_prog_if, - pPCI->pci_header_type); -#endif - } - - *ppPCI = NULL; /* Terminate array */ -} |