summaryrefslogtreecommitdiff
path: root/sound/soc/pxa
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/pxa')
-rw-r--r--sound/soc/pxa/Kconfig8
-rw-r--r--sound/soc/pxa/Makefile2
-rw-r--r--sound/soc/pxa/spitz.c43
-rw-r--r--sound/soc/pxa/z2.c246
4 files changed, 292 insertions, 7 deletions
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 376e14a9c273..495a36fba360 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -42,6 +42,14 @@ config SND_PXA2XX_SOC_SPITZ
Say Y if you want to add support for SoC audio on Sharp
Zaurus SL-Cxx00 models (Spitz, Borzoi and Akita).
+config SND_PXA2XX_SOC_Z2
+ tristate "SoC Audio support for Zipit Z2"
+ depends on SND_PXA2XX_SOC && MACH_ZIPIT2
+ select SND_PXA2XX_SOC_I2S
+ select SND_SOC_WM8750
+ help
+ Say Y if you want to add support for SoC audio on Zipit Z2.
+
config SND_PXA2XX_SOC_POODLE
tristate "SoC Audio support for Poodle"
depends on SND_PXA2XX_SOC && MACH_POODLE
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index f3e08fd40ca2..caa03d8f4789 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -22,6 +22,7 @@ snd-soc-palm27x-objs := palm27x.o
snd-soc-zylonite-objs := zylonite.o
snd-soc-magician-objs := magician.o
snd-soc-mioa701-objs := mioa701_wm9713.o
+snd-soc-z2-objs := z2.o
snd-soc-imote2-objs := imote2.o
snd-soc-raumfeld-objs := raumfeld.o
@@ -36,6 +37,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o
obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o
obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
+obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o
obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index c4cd2acaacb4..1941a357e8c4 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -322,19 +322,44 @@ static struct snd_soc_card snd_soc_spitz = {
.num_links = 1,
};
-/* spitz audio private data */
-static struct wm8750_setup_data spitz_wm8750_setup = {
- .i2c_bus = 0,
- .i2c_address = 0x1b,
-};
-
/* spitz audio subsystem */
static struct snd_soc_device spitz_snd_devdata = {
.card = &snd_soc_spitz,
.codec_dev = &soc_codec_dev_wm8750,
- .codec_data = &spitz_wm8750_setup,
};
+/*
+ * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
+ * New drivers should register the wm8750 I2C device in the machine
+ * setup code (under arch/arm for ARM systems).
+ */
+static int wm8750_i2c_register(void)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = 0x1b;
+ strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
+
+ adapter = i2c_get_adapter(0);
+ if (!adapter) {
+ printk(KERN_ERR "can't get i2c adapter 0\n");
+ return -ENODEV;
+ }
+
+ client = i2c_new_device(adapter, &info);
+ i2c_put_adapter(adapter);
+ if (!client) {
+ printk(KERN_ERR "can't add i2c device at 0x%x\n",
+ (unsigned int)info.addr);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static struct platform_device *spitz_snd_device;
static int __init spitz_init(void)
@@ -344,6 +369,10 @@ static int __init spitz_init(void)
if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
return -ENODEV;
+ ret = wm8750_i2c_setup();
+ if (ret != 0)
+ return ret;
+
spitz_snd_device = platform_device_alloc("soc-audio", -1);
if (!spitz_snd_device)
return -ENOMEM;
diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c
new file mode 100644
index 000000000000..4e4d2fa8ddc5
--- /dev/null
+++ b/sound/soc/pxa/z2.c
@@ -0,0 +1,246 @@
+/*
+ * linux/sound/soc/pxa/z2.c
+ *
+ * SoC Audio driver for Aeronix Zipit Z2
+ *
+ * Copyright (C) 2009 Ken McGuire <kenm@desertweyr.com>
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/z2.h>
+
+#include "../codecs/wm8750.h"
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-i2s.h"
+
+static struct snd_soc_card snd_soc_z2;
+
+static int z2_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int clk = 0;
+ int ret = 0;
+
+ switch (params_rate(params)) {
+ case 8000:
+ case 16000:
+ case 48000:
+ case 96000:
+ clk = 12288000;
+ break;
+ case 11025:
+ case 22050:
+ case 44100:
+ clk = 11289600;
+ break;
+ }
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* set the I2S system clock as input (unused) */
+ ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_jack hs_jack;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+ {
+ .pin = "Mic Jack",
+ .mask = SND_JACK_MICROPHONE,
+ },
+ {
+ .pin = "Headphone Jack",
+ .mask = SND_JACK_HEADPHONE,
+ },
+};
+
+/* Headset jack detection gpios */
+static struct snd_soc_jack_gpio hs_jack_gpios[] = {
+ {
+ .gpio = GPIO37_ZIPITZ2_HEADSET_DETECT,
+ .name = "hsdet-gpio",
+ .report = SND_JACK_HEADSET,
+ .debounce_time = 200,
+ },
+};
+
+/* z2 machine dapm widgets */
+static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_MIC("Mic Jack", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+
+ /* headset is a mic and mono headphone */
+ SND_SOC_DAPM_HP("Headset Jack", NULL),
+};
+
+/* Z2 machine audio_map */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+ /* headphone connected to LOUT1, ROUT1 */
+ {"Headphone Jack", NULL, "LOUT1"},
+ {"Headphone Jack", NULL, "ROUT1"},
+
+ /* ext speaker connected to LOUT2, ROUT2 */
+ {"Ext Spk", NULL , "ROUT2"},
+ {"Ext Spk", NULL , "LOUT2"},
+
+ /* mic is connected to R input 2 - with bias */
+ {"RINPUT2", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Mic Jack"},
+};
+
+/*
+ * Logic for a wm8750 as connected on a Z2 Device
+ */
+static int z2_wm8750_init(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ /* NC codec pins */
+ snd_soc_dapm_disable_pin(codec, "LINPUT3");
+ snd_soc_dapm_disable_pin(codec, "RINPUT3");
+ snd_soc_dapm_disable_pin(codec, "OUT3");
+ snd_soc_dapm_disable_pin(codec, "MONO");
+
+ /* Add z2 specific widgets */
+ snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets,
+ ARRAY_SIZE(wm8750_dapm_widgets));
+
+ /* Set up z2 specific audio paths */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ ret = snd_soc_dapm_sync(codec);
+ if (ret)
+ goto err;
+
+ /* Jack detection API stuff */
+ ret = snd_soc_jack_new(&snd_soc_z2, "Headset Jack", SND_JACK_HEADSET,
+ &hs_jack);
+ if (ret)
+ goto err;
+
+ ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins),
+ hs_jack_pins);
+ if (ret)
+ goto err;
+
+ ret = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios),
+ hs_jack_gpios);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ return ret;
+}
+
+static struct snd_soc_ops z2_ops = {
+ .hw_params = z2_hw_params,
+};
+
+/* z2 digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link z2_dai = {
+ .name = "wm8750",
+ .stream_name = "WM8750",
+ .cpu_dai = &pxa_i2s_dai,
+ .codec_dai = &wm8750_dai,
+ .init = z2_wm8750_init,
+ .ops = &z2_ops,
+};
+
+/* z2 audio machine driver */
+static struct snd_soc_card snd_soc_z2 = {
+ .name = "Z2",
+ .platform = &pxa2xx_soc_platform,
+ .dai_link = &z2_dai,
+ .num_links = 1,
+};
+
+/* z2 audio subsystem */
+static struct snd_soc_device z2_snd_devdata = {
+ .card = &snd_soc_z2,
+ .codec_dev = &soc_codec_dev_wm8750,
+};
+
+static struct platform_device *z2_snd_device;
+
+static int __init z2_init(void)
+{
+ int ret;
+
+ if (!machine_is_zipit2())
+ return -ENODEV;
+
+ z2_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!z2_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(z2_snd_device, &z2_snd_devdata);
+ z2_snd_devdata.dev = &z2_snd_device->dev;
+ ret = platform_device_add(z2_snd_device);
+
+ if (ret)
+ platform_device_put(z2_snd_device);
+
+ return ret;
+}
+
+static void __exit z2_exit(void)
+{
+ platform_device_unregister(z2_snd_device);
+}
+
+module_init(z2_init);
+module_exit(z2_exit);
+
+MODULE_AUTHOR("Ken McGuire <kenm@desertweyr.com>, "
+ "Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC ZipitZ2");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 07:12:48 +0000