diff options
Diffstat (limited to 'drivers/usb/host/Kconfig')
| -rw-r--r-- | drivers/usb/host/Kconfig | 18 |
1 files changed, 12 insertions, 6 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1f117c360ebb..3050b18b2447 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -5,6 +5,7 @@ comment "USB Host Controller Drivers" config USB_C67X00_HCD tristate "Cypress C67x00 HCD support" + depends on HAS_IOMEM help The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role host/peripheral/OTG USB controllers. @@ -17,6 +18,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" + depends on HAS_DMA && HAS_IOMEM ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -53,6 +55,7 @@ config USB_XHCI_MTK config USB_XHCI_MVEBU tristate "xHCI support for Marvell Armada 375/38x" select USB_XHCI_PLATFORM + depends on HAS_IOMEM depends on ARCH_MVEBU || COMPILE_TEST ---help--- Say 'Y' to enable the support for the xHCI host controller @@ -61,7 +64,7 @@ config USB_XHCI_MVEBU config USB_XHCI_RCAR tristate "xHCI support for Renesas R-Car SoCs" select USB_XHCI_PLATFORM - depends on ARCH_SHMOBILE || COMPILE_TEST + depends on ARCH_RENESAS || COMPILE_TEST ---help--- Say 'Y' to enable the support for the xHCI host controller found in Renesas R-Car ARM SoCs. @@ -70,6 +73,7 @@ endif # USB_XHCI_HCD config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" + depends on HAS_DMA && HAS_IOMEM ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -121,9 +125,6 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. -config USB_FSL_MPH_DR_OF - tristate - if USB_EHCI_HCD config USB_EHCI_PCI @@ -156,7 +157,6 @@ config USB_EHCI_FSL tristate "Support for Freescale PPC on-chip EHCI USB controller" depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT - select USB_FSL_MPH_DR_OF if OF ---help--- Variation of ARC USB block used in some Freescale chips. @@ -328,6 +328,7 @@ endif # USB_EHCI_HCD config USB_OXU210HP_HCD tristate "OXU210HP HCD support" + depends on HAS_IOMEM ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -340,6 +341,7 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" + depends on HAS_IOMEM ---help--- The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -351,6 +353,7 @@ config USB_ISP116X_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" + depends on HAS_IOMEM ---help--- Supports the Philips ISP1362 chip as a host controller @@ -361,7 +364,7 @@ config USB_ISP1362_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" - depends on USB + depends on USB && HAS_DMA && HAS_IOMEM ---help--- Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification @@ -383,6 +386,7 @@ config USB_MAX3421_HCD config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" + depends on HAS_DMA && HAS_IOMEM ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -668,6 +672,7 @@ config USB_U132_HCD config USB_SL811_HCD tristate "SL811HS HCD support" + depends on HAS_IOMEM help The SL811HS is a single-port USB controller that supports either host side or peripheral side roles. Enable this option if your @@ -699,6 +704,7 @@ config USB_SL811_CS config USB_R8A66597_HCD tristate "R8A66597 HCD support" + depends on HAS_IOMEM help The R8A66597 is a USB 2.0 host and peripheral controller. |