diff options
| -rw-r--r-- | arch/mn10300/configs/asb2303_defconfig | 5 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2303/Makefile | 2 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2303/flash.c | 100 |
3 files changed, 105 insertions, 2 deletions
diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index 0189a058da9f..ca9876a111d3 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -282,7 +282,10 @@ CONFIG_MTD_CFI_UTIL=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_PLATRAM is not set # diff --git a/arch/mn10300/unit-asb2303/Makefile b/arch/mn10300/unit-asb2303/Makefile index 03e579fa99d0..38a5bb43b0bb 100644 --- a/arch/mn10300/unit-asb2303/Makefile +++ b/arch/mn10300/unit-asb2303/Makefile @@ -3,4 +3,4 @@ # Makefile for the ASB2303 board # ############################################################################### -obj-y := unit-init.o smc91111.o leds.o +obj-y := unit-init.o smc91111.o flash.o leds.o diff --git a/arch/mn10300/unit-asb2303/flash.c b/arch/mn10300/unit-asb2303/flash.c new file mode 100644 index 000000000000..17fe083fcb6f --- /dev/null +++ b/arch/mn10300/unit-asb2303/flash.c @@ -0,0 +1,100 @@ +/* Handle mapping of the flash on the ASB2303 board + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#define ASB2303_PROM_ADDR 0xA0000000 /* Boot PROM */ +#define ASB2303_PROM_SIZE (2 * 1024 * 1024) +#define ASB2303_FLASH_ADDR 0xA4000000 /* System Flash */ +#define ASB2303_FLASH_SIZE (32 * 1024 * 1024) +#define ASB2303_CONFIG_ADDR 0xA6000000 /* System Config EEPROM */ +#define ASB2303_CONFIG_SIZE (8 * 1024) + +/* + * default MTD partition table for both main flash devices, expected to be + * overridden by RedBoot + */ +static struct mtd_partition asb2303_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM /* force read-only */ + }, { + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + }, { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + } +}; + +/* + * the ASB2303 Boot PROM definition + */ +static struct physmap_flash_data asb2303_bootprom_data = { + .width = 2, + .nr_parts = 1, + .parts = asb2303_partitions, +}; + +static struct resource asb2303_bootprom_resource = { + .start = ASB2303_PROM_ADDR, + .end = ASB2303_PROM_ADDR + ASB2303_PROM_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device asb2303_bootprom = { + .name = "physmap-flash", + .id = 0, + .dev.platform_data = &asb2303_bootprom_data, + .num_resources = 1, + .resource = &asb2303_bootprom_resource, +}; + +/* + * the ASB2303 System Flash definition + */ +static struct physmap_flash_data asb2303_sysflash_data = { + .width = 4, + .nr_parts = 1, + .parts = asb2303_partitions, +}; + +static struct resource asb2303_sysflash_resource = { + .start = ASB2303_FLASH_ADDR, + .end = ASB2303_FLASH_ADDR + ASB2303_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device asb2303_sysflash = { + .name = "physmap-flash", + .id = 1, + .dev.platform_data = &asb2303_sysflash_data, + .num_resources = 1, + .resource = &asb2303_sysflash_resource, +}; + +/* + * register the ASB2303 flashes + */ +static int __init asb2303_mtd_init(void) +{ + platform_device_register(&asb2303_bootprom); + platform_device_register(&asb2303_sysflash); + return 0; +} + +module_init(asb2303_mtd_init); |