summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/core/hcd.h1
-rw-r--r--drivers/usb/core/hub.c19
-rw-r--r--drivers/usb/host/xhci-pci.c1
-rw-r--r--drivers/usb/host/xhci.h1
4 files changed, 14 insertions, 8 deletions
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index bbe2b924aae8..70a7e490f81b 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -286,6 +286,7 @@ struct hc_driver {
*/
int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
+ int (*reset_device)(struct usb_hcd *, struct usb_device *);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 20ecb4cec8de..bb416cdee1a7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2008,7 +2008,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay)
{
int i, status;
+ struct usb_hcd *hcd;
+ hcd = bus_to_hcd(udev->bus);
/* Block EHCI CF initialization during the port reset.
* Some companion controllers don't like it when they mix.
*/
@@ -2036,6 +2038,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
/* TRSTRCY = 10 ms; plus some extra */
msleep(10 + 40);
update_address(udev, 0);
+ if (hcd->driver->reset_device) {
+ status = hcd->driver->reset_device(hcd, udev);
+ if (status < 0) {
+ dev_err(&udev->dev, "Cannot reset "
+ "HCD device state\n");
+ break;
+ }
+ }
/* FALL THROUGH */
case -ENOTCONN:
case -ENODEV:
@@ -2645,14 +2655,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
mutex_lock(&usb_address0_mutex);
- if ((hcd->driver->flags & HCD_USB3) && udev->config) {
- /* FIXME this will need special handling by the xHCI driver. */
- dev_dbg(&udev->dev,
- "xHCI reset of configured device "
- "not supported yet.\n");
- retval = -EINVAL;
- goto fail;
- } else if (!udev->config && oldspeed == USB_SPEED_SUPER) {
+ if (!udev->config && oldspeed == USB_SPEED_SUPER) {
/* Don't reset USB 3.0 devices during an initial setup */
usb_set_device_state(udev, USB_STATE_DEFAULT);
} else {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index e097008d6fb1..417d37aff8d7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -139,6 +139,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
.update_hub_device = xhci_update_hub_device,
+ .reset_device = xhci_reset_device,
/*
* scheduling support
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index feb0101f91eb..741ece482e31 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1270,6 +1270,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
+int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);