Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...

8 files changed, 39 insertions, 1 deletions

diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
index 8554cb6a81b9..a3216655d657 100644
--- a/include/asm-generic/ioctls.h
+++ b/include/asm-generic/ioctls.h
@@ -62,7 +62,9 @@
 #define TCSETSW2	_IOW('T', 0x2C, struct termios2)
 #define TCSETSF2	_IOW('T', 0x2D, struct termios2)
 #define TIOCGRS485	0x542E
+#ifndef TIOCSRS485
 #define TIOCSRS485	0x542F
+#endif
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
 #define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
diff --git a/include/linux/altera_uart.h b/include/linux/altera_uart.h
index 8d441064a30d..a10a90791976 100644
--- a/include/linux/altera_uart.h
+++ b/include/linux/altera_uart.h
@@ -5,10 +5,15 @@
 #ifndef	__ALTUART_H
 #define	__ALTUART_H
 
+#include <linux/init.h>
+
 struct altera_uart_platform_uart {
 	unsigned long mapbase;	/* Physical address base */
 	unsigned int irq;	/* Interrupt vector */
 	unsigned int uartclk;	/* UART clock rate */
+	unsigned int bus_shift;	/* Bus shift (address stride) */
 };
 
+int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp);
+
 #endif /* __ALTUART_H */
diff --git a/include/linux/selection.h b/include/linux/selection.h
index 8cdaa1151d2e..85193aa8c1e3 100644
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -39,5 +39,6 @@ extern void putconsxy(struct vc_data *vc, unsigned char *p);
 
 extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
 extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
+extern void vcs_scr_updated(struct vc_data *vc);
 
 #endif
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 7638deaaba65..97f5b45bbc07 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -35,6 +35,8 @@ struct plat_serial8250_port {
 	void		(*set_termios)(struct uart_port *,
 			               struct ktermios *new,
 			               struct ktermios *old);
+	void		(*pm)(struct uart_port *, unsigned int state,
+			      unsigned old);
 };
 
 /*
@@ -76,5 +78,11 @@ extern int serial8250_find_port_for_earlycon(void);
 extern int setup_early_serial8250_console(char *cmdline);
 extern void serial8250_do_set_termios(struct uart_port *port,
 		struct ktermios *termios, struct ktermios *old);
+extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
+			     unsigned int oldstate);
+
+extern void serial8250_set_isa_configurator(void (*v)
+					(int port, struct uart_port *up,
+						unsigned short *capabilities));
 
 #endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 563e23400913..99e5994e6f84 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -289,6 +289,8 @@ struct uart_port {
 	void			(*set_termios)(struct uart_port *,
 				               struct ktermios *new,
 				               struct ktermios *old);
+	void			(*pm)(struct uart_port *, unsigned int state,
+				      unsigned int old);
 	unsigned int		irq;			/* irq number */
 	unsigned long		irqflags;		/* irq flags  */
 	unsigned int		uartclk;		/* base uart clock */
@@ -411,6 +413,14 @@ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios
 				unsigned int max);
 unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
 
+/* Base timer interval for polling */
+static inline int uart_poll_timeout(struct uart_port *port)
+{
+	int timeout = port->timeout;
+
+	return timeout > 6 ? (timeout / 2 - 2) : 1;
+}
+
 /*
  * Console helpers.
  */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 67d64e6efe7a..86be0cdeb11b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -256,6 +256,7 @@ struct tty_operations;
 struct tty_struct {
 	int	magic;
 	struct kref kref;
+	struct device *dev;
 	struct tty_driver *driver;
 	const struct tty_operations *ops;
 	int index;
@@ -465,7 +466,7 @@ extern void proc_clear_tty(struct task_struct *p);
 extern struct tty_struct *get_current_tty(void);
 extern void tty_default_fops(struct file_operations *fops);
 extern struct tty_struct *alloc_tty_struct(void);
-extern void tty_add_file(struct tty_struct *tty, struct file *file);
+extern int tty_add_file(struct tty_struct *tty, struct file *file);
 extern void free_tty_struct(struct tty_struct *tty);
 extern void initialize_tty_struct(struct tty_struct *tty,
 		struct tty_driver *driver, int idx);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index b08677982525..db2d227694da 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -224,6 +224,12 @@
  *	unless the tty also has a valid tty->termiox pointer.
  *
  *	Optional: Called under the termios lock
+ *
+ * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
+ *
+ *	Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
+ *	structure to complete. This method is optional and will only be called
+ *	if provided (otherwise EINVAL will be returned).
  */
 
 #include <linux/fs.h>
@@ -232,6 +238,7 @@
 
 struct tty_struct;
 struct tty_driver;
+struct serial_icounter_struct;
 
 struct tty_operations {
 	struct tty_struct * (*lookup)(struct tty_driver *driver,
@@ -268,6 +275,8 @@ struct tty_operations {
 			unsigned int set, unsigned int clear);
 	int (*resize)(struct tty_struct *tty, struct winsize *ws);
 	int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
+	int (*get_icount)(struct tty_struct *tty,
+				struct serial_icounter_struct *icount);
 #ifdef CONFIG_CONSOLE_POLL
 	int (*poll_init)(struct tty_driver *driver, int line, char *options);
 	int (*poll_get_char)(struct tty_driver *driver, int line);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 55675b1efb28..16d682f4f7c3 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -271,6 +271,8 @@ struct usb_serial_driver {
 	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+	int  (*get_icount)(struct tty_struct *tty,
+			struct serial_icounter_struct *icount);
 	/* Called by the tty layer for port level work. There may or may not
 	   be an attached tty at this point */
 	void (*dtr_rts)(struct usb_serial_port *port, int on);