Staging: w35und: clean up wblinux.c a bit

This patch removes wrapper functions from wblinux.c and moves the hardware init
and halt functions to wbusb.c which has the only callers of them.

Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 147 insertions, 175 deletions

diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c
index 03458bcd827b..9b436ac7e634 100644
--- a/drivers/staging/winbond/wblinux.c
+++ b/drivers/staging/winbond/wblinux.c
@@ -16,22 +16,6 @@
 #include "wbhal_f.h"
 #include "wblinux_f.h"
 
-unsigned char
-WBLINUX_Initial(struct wbsoft_priv * adapter)
-{
-	spin_lock_init( &adapter->SpinLock );
-	return true;
-}
-
-void
-WBLINUX_Destroy(struct wbsoft_priv * adapter)
-{
-	WBLINUX_stop( adapter );
-#ifdef _PE_USB_INI_DUMP_
-	WBDEBUG(("[w35und] unregister_netdev!\n"));
-#endif
-}
-
 void
 WBLINUX_stop(  struct wbsoft_priv * adapter )
 {
@@ -61,154 +45,3 @@ WBLINUX_stop(  struct wbsoft_priv * adapter )
 
 	atomic_dec(&adapter->ThreadCount);
 }
-
-void
-WbWlanHalt(  struct wbsoft_priv * adapter )
-{
-	//---------------------
-	adapter->sLocalPara.ShutDowned = true;
-
-	Mds_Destroy(adapter);
-
-	// Turn off Rx and Tx hardware ability
-	hal_stop(&adapter->sHwData);
-#ifdef _PE_USB_INI_DUMP_
-	WBDEBUG(("[w35und] Hal_stop O.K.\n"));
-#endif
-	msleep(100);// Waiting Irp completed
-
-	// Destroy the NDIS module
-	WBLINUX_Destroy(adapter);
-
-	// Halt the HAL
-	hal_halt(&adapter->sHwData, NULL);
-}
-
-unsigned char
-WbWLanInitialize(struct ieee80211_hw *hw)
-{
-	struct wbsoft_priv *priv = hw->priv;
-	phw_data_t	pHwData;
-	u8		*pMacAddr;
-	u8		*pMacAddr2;
-	u32		InitStep = 0;
-	u8		EEPROM_region;
-	u8		HwRadioOff;
-
-	//
-	// Setting default value for Linux
-	//
-	priv->sLocalPara.region_INF = REGION_AUTO;
-	priv->sLocalPara.TxRateMode = RATE_AUTO;
-	priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;	// B/G mode
-	priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
-	priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
-	hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
-	priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
-	priv->sLocalPara.bPreambleMode = AUTO_MODE;
-	priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
-	pHwData = &priv->sHwData;
-	hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
-
-	//
-	// Initial each module and variable
-	//
-	if (!WBLINUX_Initial(priv)) {
-#ifdef _PE_USB_INI_DUMP_
-		WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
-#endif
-		goto error;
-	}
-
-	// Initial Software variable
-	priv->sLocalPara.ShutDowned = false;
-
-	//added by ws for wep key error detection
-	priv->sLocalPara.bWepKeyError= false;
-	priv->sLocalPara.bToSelfPacketReceived = false;
-	priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
-
-	// Initial USB hal
-	InitStep = 1;
-	pHwData = &priv->sHwData;
-	if (!hal_init_hardware(hw))
-		goto error;
-
-	EEPROM_region = hal_get_region_from_EEPROM( pHwData );
-	if (EEPROM_region != REGION_AUTO)
-		priv->sLocalPara.region = EEPROM_region;
-	else {
-		if (priv->sLocalPara.region_INF != REGION_AUTO)
-			priv->sLocalPara.region = priv->sLocalPara.region_INF;
-		else
-			priv->sLocalPara.region = REGION_USA;	//default setting
-	}
-
-	// Get Software setting flag from hal
-	priv->sLocalPara.boAntennaDiversity = false;
-	if (hal_software_set(pHwData) & 0x00000001)
-		priv->sLocalPara.boAntennaDiversity = true;
-
-	//
-	// For TS module
-	//
-	InitStep = 2;
-
-	// For MDS module
-	InitStep = 3;
-	Mds_initial(priv);
-
-	//=======================================
-	// Initialize the SME, SCAN, MLME, ROAM
-	//=======================================
-	InitStep = 4;
-	InitStep = 5;
-	InitStep = 6;
-
-	// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
-	pMacAddr = priv->sLocalPara.ThisMacAddress;
-	pMacAddr2 = priv->sLocalPara.PermanentAddress;
-	hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
-	if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
-		memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
-	else {
-		// Set the user define MAC address
-		hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
-	}
-
-	//get current antenna
-	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
-#ifdef _PE_STATE_DUMP_
-	WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
-#endif
-	hal_get_hw_radio_off( pHwData );
-
-	// Waiting for HAL setting OK
-	while (!hal_idle(pHwData))
-		msleep(10);
-
-	MTO_Init(priv);
-
-	HwRadioOff = hal_get_hw_radio_off( pHwData );
-	priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
-
-	hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
-
-	hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
-	//set a tx power for reference.....
-//	sme_set_tx_power_level(priv, 12);	FIXME?
-	return true;
-
-error:
-	switch (InitStep) {
-	case 5:
-	case 4:
-	case 3: Mds_Destroy( priv );
-	case 2:
-	case 1: WBLINUX_Destroy( priv );
-		hal_halt( pHwData, NULL );
-	case 0: break;
-	}
-
-	return false;
-}
diff --git a/drivers/staging/winbond/wblinux_f.h b/drivers/staging/winbond/wblinux_f.h
index 15e6a6562fcc..f531a0129480 100644
--- a/drivers/staging/winbond/wblinux_f.h
+++ b/drivers/staging/winbond/wblinux_f.h
@@ -9,15 +9,10 @@
 //
 // wblinux_f.h
 //
-unsigned char WBLINUX_Initial(  struct wbsoft_priv *adapter );
 int wb35_start_xmit(struct sk_buff *skb, struct net_device *netdev );
 void WBLINUX_stop(  struct wbsoft_priv *adapter );
-void WBLINUX_Destroy(  struct wbsoft_priv *adapter );
 void wb35_set_multicast( struct net_device *netdev );
 struct net_device_stats * wb35_netdev_stats( struct net_device *netdev );
 void WBLINUX_stop(  struct wbsoft_priv *adapter );
-void WbWlanHalt(  struct wbsoft_priv *adapter );
-unsigned char WbWLanInitialize(struct ieee80211_hw *hw);
-
 
 #endif
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 67847c8ad28c..673875d30ca3 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -7,7 +7,9 @@
 #include <linux/usb.h>
 
 #include "core.h"
+#include "mds_f.h"
 #include "mlmetxrx_f.h"
+#include "mto_f.h"
 #include "wbhal_f.h"
 #include "wblinux_f.h"
 
@@ -180,7 +182,7 @@ static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
 
 static const struct ieee80211_ops wbsoft_ops = {
 	.tx			= wbsoft_tx,
-	.start			= wbsoft_start,		/* Start can be pretty much empty as we do WbWLanInitialize() during probe? */
+	.start			= wbsoft_start,		/* Start can be pretty much empty as we do wb35_hw_init() during probe? */
 	.stop			= wbsoft_stop,
 	.add_interface		= wbsoft_add_interface,
 	.remove_interface	= wbsoft_remove_interface,
@@ -193,6 +195,124 @@ static const struct ieee80211_ops wbsoft_ops = {
 // conf_tx: hal_set_cwmin()/hal_set_cwmax;
 };
 
+static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
+{
+	struct wbsoft_priv *priv = hw->priv;
+	phw_data_t	pHwData;
+	u8		*pMacAddr;
+	u8		*pMacAddr2;
+	u32		InitStep = 0;
+	u8		EEPROM_region;
+	u8		HwRadioOff;
+
+	//
+	// Setting default value for Linux
+	//
+	priv->sLocalPara.region_INF = REGION_AUTO;
+	priv->sLocalPara.TxRateMode = RATE_AUTO;
+	priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;	// B/G mode
+	priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
+	priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
+	hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
+	priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
+	priv->sLocalPara.bPreambleMode = AUTO_MODE;
+	priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
+	pHwData = &priv->sHwData;
+	hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
+
+	// Initial Software variable
+	priv->sLocalPara.ShutDowned = false;
+
+	//added by ws for wep key error detection
+	priv->sLocalPara.bWepKeyError= false;
+	priv->sLocalPara.bToSelfPacketReceived = false;
+	priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
+
+	// Initial USB hal
+	InitStep = 1;
+	pHwData = &priv->sHwData;
+	if (!hal_init_hardware(hw))
+		goto error;
+
+	EEPROM_region = hal_get_region_from_EEPROM( pHwData );
+	if (EEPROM_region != REGION_AUTO)
+		priv->sLocalPara.region = EEPROM_region;
+	else {
+		if (priv->sLocalPara.region_INF != REGION_AUTO)
+			priv->sLocalPara.region = priv->sLocalPara.region_INF;
+		else
+			priv->sLocalPara.region = REGION_USA;	//default setting
+	}
+
+	// Get Software setting flag from hal
+	priv->sLocalPara.boAntennaDiversity = false;
+	if (hal_software_set(pHwData) & 0x00000001)
+		priv->sLocalPara.boAntennaDiversity = true;
+
+	//
+	// For TS module
+	//
+	InitStep = 2;
+
+	// For MDS module
+	InitStep = 3;
+	Mds_initial(priv);
+
+	//=======================================
+	// Initialize the SME, SCAN, MLME, ROAM
+	//=======================================
+	InitStep = 4;
+	InitStep = 5;
+	InitStep = 6;
+
+	// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
+	pMacAddr = priv->sLocalPara.ThisMacAddress;
+	pMacAddr2 = priv->sLocalPara.PermanentAddress;
+	hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
+	if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
+		memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
+	else {
+		// Set the user define MAC address
+		hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
+	}
+
+	//get current antenna
+	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
+#ifdef _PE_STATE_DUMP_
+	WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+#endif
+	hal_get_hw_radio_off( pHwData );
+
+	// Waiting for HAL setting OK
+	while (!hal_idle(pHwData))
+		msleep(10);
+
+	MTO_Init(priv);
+
+	HwRadioOff = hal_get_hw_radio_off( pHwData );
+	priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
+
+	hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
+
+	hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
+	//set a tx power for reference.....
+//	sme_set_tx_power_level(priv, 12);	FIXME?
+	return true;
+
+error:
+	switch (InitStep) {
+	case 5:
+	case 4:
+	case 3: Mds_Destroy( priv );
+	case 2:
+	case 1: WBLINUX_stop(priv);
+		hal_halt( pHwData, NULL );
+	case 0: break;
+	}
+
+	return false;
+}
+
 static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
 {
 	PWBUSB		pWbUsb;
@@ -225,6 +345,8 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	priv = dev->priv;
 
+	spin_lock_init(&priv->SpinLock);
+
 	pWbUsb = &priv->sHwData.WbUsb;
 	pWbUsb->udev = udev;
 
@@ -236,7 +358,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 		pWbUsb->IsUsb20 = 1;
 	}
 
-	if (!WbWLanInitialize(dev)) {
+	if (!wb35_hw_init(dev)) {
 		err = -EINVAL;
 		goto error_free_hw;
 	}
@@ -300,11 +422,33 @@ void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress, int PacketSize
 	ieee80211_rx_irqsafe(hw, skb, &rx_status);
 }
 
+static void wb35_hw_halt(struct wbsoft_priv *adapter)
+{
+	//---------------------
+	adapter->sLocalPara.ShutDowned = true;
+
+	Mds_Destroy( adapter );
+
+	// Turn off Rx and Tx hardware ability
+	hal_stop( &adapter->sHwData );
+#ifdef _PE_USB_INI_DUMP_
+	WBDEBUG(("[w35und] Hal_stop O.K.\n"));
+#endif
+	msleep(100);// Waiting Irp completed
+
+	// Destroy the NDIS module
+	WBLINUX_stop(adapter);
+
+	// Halt the HAL
+	hal_halt(&adapter->sHwData, NULL);
+}
+
+
 static void wb35_disconnect(struct usb_interface *intf)
 {
 	struct wbsoft_priv *priv = usb_get_intfdata(intf);
 
-	WbWlanHalt(priv);
+	wb35_hw_halt(priv);
 
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(interface_to_usbdev(intf));